[llvm] r317554 - [docs][ARM] Add HowTo for cross compiling and testing compiler-rt builtins

Tue Nov 7 01:40:05 PST 2017

Author: psmith
Date: Tue Nov  7 01:40:05 2017
New Revision: 317554

URL: http://llvm.org/viewvc/llvm-project?rev=317554&view=rev
Log:
[docs][ARM] Add HowTo for cross compiling and testing compiler-rt builtins

This document contains information on how to cross-compile the compiler-rt
builtins library for several flavours of Arm target and how to test the
libraries using qemu.

Differential Revision: https://reviews.llvm.org/D39600


Added:
    llvm/trunk/docs/HowToCrossCompileBuiltinsOnArm.rst
Modified:
    llvm/trunk/docs/index.rst

Added: llvm/trunk/docs/HowToCrossCompileBuiltinsOnArm.rst
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/docs/HowToCrossCompileBuiltinsOnArm.rst?rev=317554&view=auto
==============================================================================

--- llvm/trunk/docs/HowToCrossCompileBuiltinsOnArm.rst (added)
+++ llvm/trunk/docs/HowToCrossCompileBuiltinsOnArm.rst Tue Nov  7 01:40:05 2017
@@ -0,0 +1,201 @@
+===================================================================
+How to Cross Compile Compiler-rt Builtins For Arm
+===================================================================
+
+Introduction
+============
+
+This document contains information about building and testing the builtins part
+of compiler-rt for an Arm target, from an x86_64 Linux machine.
+
+While this document concentrates on Arm and Linux the general principles should
+apply to other targets supported by compiler-rt. Further contributions for other
+targets are welcome.
+
+The instructions in this document depend on libraries and programs external to
+LLVM, there are many ways to install and configure these dependencies so you
+may need to adapt the instructions here to fit your own local situation.
+
+Prerequisites
+=============
+
+In this use case we'll be using CMake on a Debian-based Linux system,
+cross-compiling from an x86_64 host to a hard-float Armv7-A target. We'll be
+using as many of the LLVM tools as we can, but it is possible to use GNU
+equivalents.
+
+ * ``A build of LLVM/clang for the llvm-tools and llvm-config``
+ * ``The qemu-arm user mode emulator``
+ * ``An arm-linux-gnueabihf sysroot``
+
+See https://compiler-rt.llvm.org/ for more information about the dependencies
+on clang and LLVM.
+
+``qemu-arm`` should be available as a package for your Linux distribution.
+
+The most complicated of the prequisites to satisfy is the arm-linux-gnueabihf
+sysroot. The :doc:`HowToCrossCompileLLVM` has information about how to use the
+Linux distributions multiarch support to fulfill the dependencies for building
+LLVM. Alternatively, as building and testing just the compiler-rt builtins
+requires fewer dependencies than LLVM, it is possible to use the Linaro
+arm-linux-gnueabihf gcc installation as our sysroot.
+
+Building compiler-rt builtins for Arm
+=====================================
+We will be doing a standalone build of compiler-rt using the following cmake
+options.
+
+* ``path/to/llvm/projects/compiler-rt``
+* ``-DCOMPILER_RT_BUILD_BUILTINS=ON``
+* ``-DCOMPILER_RT_BUILD_SANITIZERS=OFF``
+* ``-DCOMPILER_RT_BUILD_XRAY=OFF``
+* ``-DCOMPILER_RT_BUILD_LIBFUZZER=OFF``
+* ``-DCOMPILER_RT_BUILD_PROFILE=OFF``
+* ``-DCMAKE_C_COMPILER=/path/to/clang``
+* ``-DCMAKE_AR=/path/to/llvm-ar``
+* ``-DCMAKE_NM=/path/to/llvm-nm``
+* ``-DCMAKE_RANLIB=/path/to/llvm-ranlib``
+* ``-DCMAKE_EXE_LINKER_FLAGS="-fuse-ld=lld"``
+* ``-DCMAKE_C_COMPILER_TARGET="arm-linux-gnueabihf"``
+* ``-DCOMPILER_RT_DEFAULT_TARGET_ONLY=ON``
+* ``-DLLVM_CONFIG_PATH=/path/to/llvm-config``
+* ``-DCMAKE_C_FLAGS="build-c-flags"``
+
+The build-c-flags need to be sufficient to pass the C-make compiler check and
+to compile compiler-rt. When using a GCC 7 Linaro arm-linux-gnueabihf
+installation the following flags are needed:
+
+* ``--target=arm-linux-gnueabihf``
+* ``--march=armv7a``
+* ``--gcc-toolchain=/path/to/dir/toolchain``
+* ``--sysroot=/path/to/toolchain/arm-linux-gnueabihf/libc``
+
+Depending on how your sysroot is laid out, you may not need ``--gcc-toolchain``.
+For example if you have added armhf as an architecture using your Linux
+distributions multiarch support then you should be able to use ``--sysroot=/``.
+
+Once cmake has completed the builtins can be built with ``ninja builtins``
+
+Testing compiler-rt builtins using qemu-arm
+===========================================
+To test the builtins library we need to add a few more cmake flags to enable
+testing and set up the compiler and flags for test case. We must also tell
+cmake that we wish to run the tests on ``qemu-arm``.
+
+* ``-DCOMPILER_RT_EMULATOR="qemu-arm -L /path/to/armhf/sysroot``
+* ``-DCOMPILER_RT_INCLUDE_TESTS=ON``
+* ``-DCOMPILER_RT_TEST_COMPILER="/path/to/clang"``
+* ``-DCOMPILER_RT_TEST_COMPILER_CFLAGS="test-c-flags"``
+
+The ``/path/to/armhf/sysroot`` should be the same as the one passed to
+``--sysroot`` in the "build-c-flags".
+
+The "test-c-flags" can be the same as the "build-c-flags", with the addition
+of ``"-fuse-ld=lld`` if you wish to use lld to link the tests.
+
+Once cmake has completed the tests can be built and run using
+``ninja check-builtins``
+
+Modifications for other Targets
+===============================
+
+Arm Soft-Float Target
+---------------------
+The instructions for the Arm hard-float target can be used for the soft-float
+target by substituting soft-float equivalents for the sysroot and target. The
+target to use is:
+
+* ``-DCMAKE_C_COMPILER_TARGET=arm-linux-gnueabi``
+
+Depending on whether you want to use floating point instructions or not you
+may need extra c-flags such as ``-mfloat-abi=softfp`` for use of floating-point
+instructions, and ``-mfloat-abi=soft -mfpu=none`` for software floating-point
+emulation.
+
+AArch64 Target
+--------------
+The instructions for Arm can be used for AArch64 by substituting AArch64
+equivalents for the sysroot, emulator and target.
+
+* ``-DCMAKE_C_COMPILER_TARGET=aarch64-linux-gnu``
+* ``-DCOMPILER_RT_EMULATOR="qemu-aarch64 -L /path/to/aarch64/sysroot``
+
+The CMAKE_C_FLAGS and COMPILER_RT_TEST_COMPILER_CFLAGS may also need:
+``"--sysroot=/path/to/aarch64/sysroot --gcc-toolchain=/path/to/gcc-toolchain"``
+
+Armv6-m, Armv7-m and Armv7E-M targets
+-------------------------------------
+If you wish to build, but not test compiler-rt for Armv6-M, Armv7-M or Armv7E-M
+then the easiest way is to use the BaremetalARM.cmake recipe in
+clang/cmake/caches.
+
+You will need a bare metal sysroot such as that provided by the GNU ARM
+Embedded toolchain.
+
+The libraries can be built with the cmake options:
+
+* ``-DBAREMETAL_ARMV6M_SYSROOT=/path/to/bare/metal/sysroot``
+* ``-DBAREMETAL_ARMV7M_SYSROOT=/path/to/bare/metal/sysroot``
+* ``-DBAREMETAL_ARMV7EM_SYSROOT=/path/to/bare/metal/sysroot``
+* ``-C /path/to/llvm/source/tools/clang/cmake/caches/BaremetalARM.cmake``
+
+**Note** that for the recipe to work the compiler-rt source must be checked out
+into the directory llvm/runtimes and not llvm/projects.
+
+To build and test the libraries using a similar method to Armv7-A is possible
+but more difficult. The main problems are:
+
+* There isn't a ``qemu-arm`` user-mode emulator for bare-metal systems. The ``qemu-system-arm`` can be used but this is significantly more difficult to setup.
+* The target to compile compiler-rt have the suffix -none-eabi. This uses the BareMetal driver in clang and by default won't find the libraries needed to pass the cmake compiler check.
+
+As the Armv6-M, Armv7-M and Armv7E-M builds of compiler-rt only use instructions
+that are supported on Armv7-A we can still get most of the value of running the
+tests using the same ``qemu-arm`` that we used for Armv7-A by building and
+running the test cases for Armv7-A but using the builtins compiled for
+Armv6-M, Armv7-M or Armv7E-M. This will not catch instructions that are
+supported on Armv7-A but not Armv6-M, Armv7-M and Armv7E-M.
+
+To get the cmake compile test to pass the libraries needed to successfully link
+the test application will need to be manually added to ``CMAKE_CFLAGS``.
+Alternatively if you are using version 3.6 or above of cmake you can use
+``CMAKE_TRY_COMPILE_TARGET=STATIC_LIBRARY`` to skip the link step.
+
+* ``-DCMAKE_TRY_COMPILE_TARGET_TYPE=STATIC_LIBRARY``
+* ``-DCOMPILER_RT_OS_DIR="baremetal"``
+* ``-DCOMPILER_RT_BUILD_BUILTINS=ON``
+* ``-DCOMPILER_RT_BUILD_SANITIZERS=OFF``
+* ``-DCOMPILER_RT_BUILD_XRAY=OFF``
+* ``-DCOMPILER_RT_BUILD_LIBFUZZER=OFF``
+* ``-DCOMPILER_RT_BUILD_PROFILE=OFF``
+* ``-DCMAKE_C_COMPILER=${host_install_dir}/bin/clang``
+* ``-DCMAKE_C_COMPILER_TARGET="your *-none-eabi target"``
+* ``-DCMAKE_AR=/path/to/llvm-ar``
+* ``-DCMAKE_NM=/path/to/llvm-nm``
+* ``-DCMAKE_RANLIB=/path/to/llvm-ranlib``
+* ``-DCOMPILER_RT_BAREMETAL_BUILD=ON``
+* ``-DCOMPILER_RT_DEFAULT_TARGET_ONLY=ON``
+* ``-DLLVM_CONFIG_PATH=/path/to/llvm-config``
+* ``-DCMAKE_C_FLAGS="build-c-flags"``
+* ``-DCMAKE_ASM_FLAGS="${arm_cflags}"``
+* ``-DCOMPILER_RT_EMULATOR="qemu-arm -L /path/to/armv7-A/sysroot"``
+* ``-DCOMPILER_RT_INCLUDE_TESTS=ON``
+* ``-DCOMPILER_RT_TEST_COMPILER="/path/to/clang"``
+* ``-DCOMPILER_RT_TEST_COMPILER_CFLAGS="test-c-flags"``
+
+The Armv6-M builtins will use the soft-float ABI. When compiling the tests for
+Armv7-A we must include ``"-mthumb -mfloat-abi=soft -mfpu=none"`` in the
+test-c-flags. We must use an Armv7-A soft-float abi sysroot for ``qemu-arm``.
+
+Unfortunately at time of writing the Armv7-M and Armv7E-M builds of
+compiler-rt will always include assembler files including floating point
+instructions. This means that building for a cpu without a floating point unit
+requires something like removing the arm_Thumb1_VFPv2_SOURCES from the
+arm_Thumb1_SOURCES in builtins/CMakeLists.txt. The float-abi of the compiler-rt
+library must be matched by the float abi of the Armv7-A sysroot used by
+qemu-arm.
+
+Depending on the linker used for the test cases you may encounter BuildAttribute
+mismatches between the M-profile objects from compiler-rt and the A-profile
+objects from the test. The lld linker does not check the BuildAttributes so it
+can be used to link the tests by adding -fuse-ld=lld to the
+``COMPILER_RT_TEST_COMPILER_CFLAGS``.

Modified: llvm/trunk/docs/index.rst
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/docs/index.rst?rev=317554&r1=317553&r2=317554&view=diff
==============================================================================
--- llvm/trunk/docs/index.rst (original)
+++ llvm/trunk/docs/index.rst Tue Nov  7 01:40:05 2017
@@ -68,6 +68,7 @@ representation.
    CMakePrimer
    AdvancedBuilds
    HowToBuildOnARM
+   HowToCrossCompileBuiltinsOnArm
    HowToCrossCompileLLVM
    CommandGuide/index
    GettingStarted
@@ -105,6 +106,9 @@ representation.
 :doc:`HowToBuildOnARM`
    Notes on building and testing LLVM/Clang on ARM.
 
+:doc:`HowToCrossCompileBuiltinsOnArm`
+   Notes on cross-building and testing the compiler-rt builtins for Arm.
+
 :doc:`HowToCrossCompileLLVM`
    Notes on cross-building and testing LLVM/Clang.
 


