[polly] r259764 - Add basic doxygen infrastructure for Polly
Johannes Doerfert via llvm-commits
llvm-commits at lists.llvm.org
Thu Feb 4 01:00:48 PST 2016
I like this efforts (doxygen + sphinx) a lot and our students will
appreciate them too the next time I let them work on Polly ;)
Thanks!
On 02/04, Tobias Grosser via llvm-commits wrote:
> Author: grosser
> Date: Thu Feb 4 01:16:36 2016
> New Revision: 259764
>
> URL: http://llvm.org/viewvc/llvm-project?rev=259764&view=rev
> Log:
> Add basic doxygen infrastructure for Polly
>
> Added:
> polly/trunk/docs/CMakeLists.txt
> polly/trunk/docs/doxygen.cfg.in
> Modified:
> polly/trunk/CMakeLists.txt
>
> Modified: polly/trunk/CMakeLists.txt
> URL: http://llvm.org/viewvc/llvm-project/polly/trunk/CMakeLists.txt?rev=259764&r1=259763&r2=259764&view=diff
> ==============================================================================
> --- polly/trunk/CMakeLists.txt (original)
> +++ polly/trunk/CMakeLists.txt Thu Feb 4 01:16:36 2016
> @@ -154,6 +154,7 @@ install(DIRECTORY ${POLLY_BINARY_DIR}/in
>
> add_definitions( -D_GNU_SOURCE )
>
> +add_subdirectory(docs)
> add_subdirectory(lib)
> add_subdirectory(test)
> add_subdirectory(tools)
>
> Added: polly/trunk/docs/CMakeLists.txt
> URL: http://llvm.org/viewvc/llvm-project/polly/trunk/docs/CMakeLists.txt?rev=259764&view=auto
> ==============================================================================
> --- polly/trunk/docs/CMakeLists.txt (added)
> +++ polly/trunk/docs/CMakeLists.txt Thu Feb 4 01:16:36 2016
> @@ -0,0 +1,103 @@
> +if (DOXYGEN_FOUND)
> +if (LLVM_ENABLE_DOXYGEN)
> + set(abs_srcdir ${CMAKE_CURRENT_SOURCE_DIR})
> + set(abs_builddir ${CMAKE_CURRENT_BINARY_DIR})
> +
> + if (HAVE_DOT)
> + set(DOT ${LLVM_PATH_DOT})
> + endif()
> +
> + if (LLVM_DOXYGEN_EXTERNAL_SEARCH)
> + set(enable_searchengine "YES")
> + set(searchengine_url "${LLVM_DOXYGEN_SEARCHENGINE_URL}")
> + set(enable_server_based_search "YES")
> + set(enable_external_search "YES")
> + set(extra_search_mappings "${LLVM_DOXYGEN_SEARCH_MAPPINGS}")
> + else()
> + set(enable_searchengine "NO")
> + set(searchengine_url "")
> + set(enable_server_based_search "NO")
> + set(enable_external_search "NO")
> + set(extra_search_mappings "")
> + endif()
> +
> + # If asked, configure doxygen for the creation of a Qt Compressed Help file.
> + if (LLVM_ENABLE_DOXYGEN_QT_HELP)
> + set(POLLY_DOXYGEN_QCH_FILENAME "org.llvm.polly.qch" CACHE STRING
> + "Filename of the Qt Compressed help file")
> + set(POLLY_DOXYGEN_QHP_NAMESPACE "org.llvm.polly" CACHE STRING
> + "Namespace under which the intermediate Qt Help Project file lives")
> + set(POLLY_DOXYGEN_QHP_CUST_FILTER_NAME "Clang ${POLLY_VERSION}" CACHE STRING
> + "See http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-filters")
> + set(POLLY_DOXYGEN_QHP_CUST_FILTER_ATTRS "Clang,${POLLY_VERSION}" CACHE STRING
> + "See http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes")
> + set(polly_doxygen_generate_qhp "YES")
> + set(polly_doxygen_qch_filename "${POLLY_DOXYGEN_QCH_FILENAME}")
> + set(polly_doxygen_qhp_namespace "${POLLY_DOXYGEN_QHP_NAMESPACE}")
> + set(polly_doxygen_qhelpgenerator_path "${LLVM_DOXYGEN_QHELPGENERATOR_PATH}")
> + set(polly_doxygen_qhp_cust_filter_name "${POLLY_DOXYGEN_QHP_CUST_FILTER_NAME}")
> + set(polly_doxygen_qhp_cust_filter_attrs "${POLLY_DOXYGEN_QHP_CUST_FILTER_ATTRS}")
> + else()
> + set(polly_doxygen_generate_qhp "NO")
> + set(polly_doxygen_qch_filename "")
> + set(polly_doxygen_qhp_namespace "")
> + set(polly_doxygen_qhelpgenerator_path "")
> + set(polly_doxygen_qhp_cust_filter_name "")
> + set(polly_doxygen_qhp_cust_filter_attrs "")
> + endif()
> +
> + option(LLVM_DOXYGEN_SVG
> + "Use svg instead of png files for doxygen graphs." OFF)
> + if (LLVM_DOXYGEN_SVG)
> + set(DOT_IMAGE_FORMAT "svg")
> + else()
> + set(DOT_IMAGE_FORMAT "png")
> + endif()
> +
> + configure_file(${CMAKE_CURRENT_SOURCE_DIR}/doxygen.cfg.in
> + ${CMAKE_CURRENT_BINARY_DIR}/doxygen.cfg @ONLY)
> +
> + set(abs_top_srcdir)
> + set(abs_top_builddir)
> + set(DOT)
> + set(enable_searchengine)
> + set(searchengine_url)
> + set(enable_server_based_search)
> + set(enable_external_search)
> + set(extra_search_mappings)
> + set(polly_doxygen_generate_qhp)
> + set(polly_doxygen_qch_filename)
> + set(polly_doxygen_qhp_namespace)
> + set(polly_doxygen_qhelpgenerator_path)
> + set(polly_doxygen_qhp_cust_filter_name)
> + set(polly_doxygen_qhp_cust_filter_attrs)
> + set(DOT_IMAGE_FORMAT)
> +
> + add_custom_target(doxygen-polly
> + COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/doxygen.cfg
> + WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
> + COMMENT "Generating polly doxygen documentation." VERBATIM)
> +
> + if (LLVM_BUILD_DOCS)
> + add_dependencies(doxygen doxygen-polly)
> + endif()
> +
> + if (NOT LLVM_INSTALL_TOOLCHAIN_ONLY)
> + install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/doxygen/html
> + DESTINATION docs/html)
> + endif()
> +endif()
> +endif()
> +
> +if (LLVM_ENABLE_SPHINX)
> + if (SPHINX_FOUND)
> + include(AddSphinxTarget)
> + if (${SPHINX_OUTPUT_HTML})
> + add_sphinx_target(html polly)
> + endif()
> + if (${SPHINX_OUTPUT_MAN})
> + add_sphinx_target(man polly)
> + endif()
> + endif()
> +endif()
> +
>
> Added: polly/trunk/docs/doxygen.cfg.in
> URL: http://llvm.org/viewvc/llvm-project/polly/trunk/docs/doxygen.cfg.in?rev=259764&view=auto
> ==============================================================================
> --- polly/trunk/docs/doxygen.cfg.in (added)
> +++ polly/trunk/docs/doxygen.cfg.in Thu Feb 4 01:16:36 2016
> @@ -0,0 +1,2305 @@
> +# Doxyfile 1.8.6
> +
> +# This file describes the settings to be used by the documentation system
> +# doxygen (www.doxygen.org) for a project.
> +#
> +# All text after a double hash (##) is considered a comment and is placed in
> +# front of the TAG it is preceding.
> +#
> +# All text after a single hash (#) is considered a comment and will be ignored.
> +# The format is:
> +# TAG = value [value, ...]
> +# For lists, items can also be appended using:
> +# TAG += value [value, ...]
> +# Values that contain spaces should be placed between quotes (\" \").
> +
> +#---------------------------------------------------------------------------
> +# Project related configuration options
> +#---------------------------------------------------------------------------
> +
> +# This tag specifies the encoding used for all characters in the config file
> +# that follow. The default is UTF-8 which is also the encoding used for all text
> +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
> +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
> +# for the list of possible encodings.
> +# The default value is: UTF-8.
> +
> +DOXYFILE_ENCODING = UTF-8
> +
> +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
> +# double-quotes, unless you are using Doxywizard) that should identify the
> +# project for which the documentation is generated. This name is used in the
> +# title of most generated pages and in a few other places.
> +# The default value is: My Project.
> +
> +PROJECT_NAME = Polly
> +
> +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
> +# could be handy for archiving the generated documentation or if some version
> +# control system is used.
> +
> +PROJECT_NUMBER = @PACKAGE_VERSION@
> +
> +# Using the PROJECT_BRIEF tag one can provide an optional one line description
> +# for a project that appears at the top of each page and should give viewer a
> +# quick idea about the purpose of the project. Keep the description short.
> +
> +PROJECT_BRIEF =
> +
> +# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
> +# the documentation. The maximum height of the logo should not exceed 55 pixels
> +# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
> +# to the output directory.
> +
> +PROJECT_LOGO =
> +
> +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
> +# into which the generated documentation will be written. If a relative path is
> +# entered, it will be relative to the location where doxygen was started. If
> +# left blank the current directory will be used.
> +
> +OUTPUT_DIRECTORY = @abs_builddir@/doxygen
> +
> +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
> +# directories (in 2 levels) under the output directory of each output format and
> +# will distribute the generated files over these directories. Enabling this
> +# option can be useful when feeding doxygen a huge amount of source files, where
> +# putting all generated files in the same directory would otherwise causes
> +# performance problems for the file system.
> +# The default value is: NO.
> +
> +CREATE_SUBDIRS = NO
> +
> +# The OUTPUT_LANGUAGE tag is used to specify the language in which all
> +# documentation generated by doxygen is written. Doxygen will use this
> +# information to generate all constant output in the proper language.
> +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
> +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
> +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
> +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
> +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
> +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
> +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
> +# Ukrainian and Vietnamese.
> +# The default value is: English.
> +
> +OUTPUT_LANGUAGE = English
> +
> +# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
> +# descriptions after the members that are listed in the file and class
> +# documentation (similar to Javadoc). Set to NO to disable this.
> +# The default value is: YES.
> +
> +BRIEF_MEMBER_DESC = YES
> +
> +# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
> +# description of a member or function before the detailed description
> +#
> +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
> +# brief descriptions will be completely suppressed.
> +# The default value is: YES.
> +
> +REPEAT_BRIEF = YES
> +
> +# This tag implements a quasi-intelligent brief description abbreviator that is
> +# used to form the text in various listings. Each string in this list, if found
> +# as the leading text of the brief description, will be stripped from the text
> +# and the result, after processing the whole list, is used as the annotated
> +# text. Otherwise, the brief description is used as-is. If left blank, the
> +# following values are used ($name is automatically replaced with the name of
> +# the entity):The $name class, The $name widget, The $name file, is, provides,
> +# specifies, contains, represents, a, an and the.
> +
> +ABBREVIATE_BRIEF =
> +
> +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
> +# doxygen will generate a detailed section even if there is only a brief
> +# description.
> +# The default value is: NO.
> +
> +ALWAYS_DETAILED_SEC = NO
> +
> +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
> +# inherited members of a class in the documentation of that class as if those
> +# members were ordinary class members. Constructors, destructors and assignment
> +# operators of the base classes will not be shown.
> +# The default value is: NO.
> +
> +INLINE_INHERITED_MEMB = NO
> +
> +# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
> +# before files name in the file list and in the header files. If set to NO the
> +# shortest path that makes the file name unique will be used
> +# The default value is: YES.
> +
> +FULL_PATH_NAMES = NO
> +
> +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
> +# Stripping is only done if one of the specified strings matches the left-hand
> +# part of the path. The tag can be used to show relative paths in the file list.
> +# If left blank the directory from which doxygen is run is used as the path to
> +# strip.
> +#
> +# Note that you can specify absolute paths here, but also relative paths, which
> +# will be relative from the directory where doxygen is started.
> +# This tag requires that the tag FULL_PATH_NAMES is set to YES.
> +
> +STRIP_FROM_PATH = ../..
> +
> +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
> +# path mentioned in the documentation of a class, which tells the reader which
> +# header file to include in order to use a class. If left blank only the name of
> +# the header file containing the class definition is used. Otherwise one should
> +# specify the list of include paths that are normally passed to the compiler
> +# using the -I flag.
> +
> +STRIP_FROM_INC_PATH =
> +
> +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
> +# less readable) file names. This can be useful is your file systems doesn't
> +# support long names like on DOS, Mac, or CD-ROM.
> +# The default value is: NO.
> +
> +SHORT_NAMES = NO
> +
> +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
> +# first line (until the first dot) of a Javadoc-style comment as the brief
> +# description. If set to NO, the Javadoc-style will behave just like regular Qt-
> +# style comments (thus requiring an explicit @brief command for a brief
> +# description.)
> +# The default value is: NO.
> +
> +JAVADOC_AUTOBRIEF = YES
> +
> +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
> +# line (until the first dot) of a Qt-style comment as the brief description. If
> +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
> +# requiring an explicit \brief command for a brief description.)
> +# The default value is: NO.
> +
> +QT_AUTOBRIEF = YES
> +
> +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
> +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
> +# a brief description. This used to be the default behavior. The new default is
> +# to treat a multi-line C++ comment block as a detailed description. Set this
> +# tag to YES if you prefer the old behavior instead.
> +#
> +# Note that setting this tag to YES also means that rational rose comments are
> +# not recognized any more.
> +# The default value is: NO.
> +
> +MULTILINE_CPP_IS_BRIEF = NO
> +
> +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
> +# documentation from any documented member that it re-implements.
> +# The default value is: YES.
> +
> +INHERIT_DOCS = YES
> +
> +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
> +# new page for each member. If set to NO, the documentation of a member will be
> +# part of the file/class/namespace that contains it.
> +# The default value is: NO.
> +
> +SEPARATE_MEMBER_PAGES = NO
> +
> +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
> +# uses this value to replace tabs by spaces in code fragments.
> +# Minimum value: 1, maximum value: 16, default value: 4.
> +
> +TAB_SIZE = 2
> +
> +# This tag can be used to specify a number of aliases that act as commands in
> +# the documentation. An alias has the form:
> +# name=value
> +# For example adding
> +# "sideeffect=@par Side Effects:\n"
> +# will allow you to put the command \sideeffect (or @sideeffect) in the
> +# documentation, which will result in a user-defined paragraph with heading
> +# "Side Effects:". You can put \n's in the value part of an alias to insert
> +# newlines.
> +
> +ALIASES =
> +
> +# This tag can be used to specify a number of word-keyword mappings (TCL only).
> +# A mapping has the form "name=value". For example adding "class=itcl::class"
> +# will allow you to use the command class in the itcl::class meaning.
> +
> +TCL_SUBST =
> +
> +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
> +# only. Doxygen will then generate output that is more tailored for C. For
> +# instance, some of the names that are used will be different. The list of all
> +# members will be omitted, etc.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_FOR_C = NO
> +
> +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
> +# Python sources only. Doxygen will then generate output that is more tailored
> +# for that language. For instance, namespaces will be presented as packages,
> +# qualified scopes will look different, etc.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_JAVA = NO
> +
> +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
> +# sources. Doxygen will then generate output that is tailored for Fortran.
> +# The default value is: NO.
> +
> +OPTIMIZE_FOR_FORTRAN = NO
> +
> +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
> +# sources. Doxygen will then generate output that is tailored for VHDL.
> +# The default value is: NO.
> +
> +OPTIMIZE_OUTPUT_VHDL = NO
> +
> +# Doxygen selects the parser to use depending on the extension of the files it
> +# parses. With this tag you can assign which parser to use for a given
> +# extension. Doxygen has a built-in mapping, but you can override or extend it
> +# using this tag. The format is ext=language, where ext is a file extension, and
> +# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
> +# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
> +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
> +# (default is Fortran), use: inc=Fortran f=C.
> +#
> +# Note For files without extension you can use no_extension as a placeholder.
> +#
> +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
> +# the files are not read by doxygen.
> +
> +EXTENSION_MAPPING =
> +
> +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
> +# according to the Markdown format, which allows for more readable
> +# documentation. See http://daringfireball.net/projects/markdown/ for details.
> +# The output of markdown processing is further processed by doxygen, so you can
> +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
> +# case of backward compatibilities issues.
> +# The default value is: YES.
> +
> +MARKDOWN_SUPPORT = YES
> +
> +# When enabled doxygen tries to link words that correspond to documented
> +# classes, or namespaces to their corresponding documentation. Such a link can
> +# be prevented in individual cases by by putting a % sign in front of the word
> +# or globally by setting AUTOLINK_SUPPORT to NO.
> +# The default value is: YES.
> +
> +AUTOLINK_SUPPORT = YES
> +
> +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
> +# to include (a tag file for) the STL sources as input, then you should set this
> +# tag to YES in order to let doxygen match functions declarations and
> +# definitions whose arguments contain STL classes (e.g. func(std::string);
> +# versus func(std::string) {}). This also make the inheritance and collaboration
> +# diagrams that involve STL classes more complete and accurate.
> +# The default value is: NO.
> +
> +BUILTIN_STL_SUPPORT = NO
> +
> +# If you use Microsoft's C++/CLI language, you should set this option to YES to
> +# enable parsing support.
> +# The default value is: NO.
> +
> +CPP_CLI_SUPPORT = NO
> +
> +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
> +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
> +# will parse them like normal C++ but will assume all classes use public instead
> +# of private inheritance when no explicit protection keyword is present.
> +# The default value is: NO.
> +
> +SIP_SUPPORT = NO
> +
> +# For Microsoft's IDL there are propget and propput attributes to indicate
> +# getter and setter methods for a property. Setting this option to YES will make
> +# doxygen to replace the get and set methods by a property in the documentation.
> +# This will only work if the methods are indeed getting or setting a simple
> +# type. If this is not the case, or you want to show the methods anyway, you
> +# should set this option to NO.
> +# The default value is: YES.
> +
> +IDL_PROPERTY_SUPPORT = YES
> +
> +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
> +# tag is set to YES, then doxygen will reuse the documentation of the first
> +# member in the group (if any) for the other members of the group. By default
> +# all members of a group must be documented explicitly.
> +# The default value is: NO.
> +
> +DISTRIBUTE_GROUP_DOC = NO
> +
> +# Set the SUBGROUPING tag to YES to allow class member groups of the same type
> +# (for instance a group of public functions) to be put as a subgroup of that
> +# type (e.g. under the Public Functions section). Set it to NO to prevent
> +# subgrouping. Alternatively, this can be done per class using the
> +# \nosubgrouping command.
> +# The default value is: YES.
> +
> +SUBGROUPING = YES
> +
> +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
> +# are shown inside the group in which they are included (e.g. using \ingroup)
> +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
> +# and RTF).
> +#
> +# Note that this feature does not work in combination with
> +# SEPARATE_MEMBER_PAGES.
> +# The default value is: NO.
> +
> +INLINE_GROUPED_CLASSES = NO
> +
> +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
> +# with only public data fields or simple typedef fields will be shown inline in
> +# the documentation of the scope in which they are defined (i.e. file,
> +# namespace, or group documentation), provided this scope is documented. If set
> +# to NO, structs, classes, and unions are shown on a separate page (for HTML and
> +# Man pages) or section (for LaTeX and RTF).
> +# The default value is: NO.
> +
> +INLINE_SIMPLE_STRUCTS = NO
> +
> +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
> +# enum is documented as struct, union, or enum with the name of the typedef. So
> +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
> +# with name TypeT. When disabled the typedef will appear as a member of a file,
> +# namespace, or class. And the struct will be named TypeS. This can typically be
> +# useful for C code in case the coding convention dictates that all compound
> +# types are typedef'ed and only the typedef is referenced, never the tag name.
> +# The default value is: NO.
> +
> +TYPEDEF_HIDES_STRUCT = NO
> +
> +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
> +# cache is used to resolve symbols given their name and scope. Since this can be
> +# an expensive process and often the same symbol appears multiple times in the
> +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
> +# doxygen will become slower. If the cache is too large, memory is wasted. The
> +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
> +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
> +# symbols. At the end of a run doxygen will report the cache usage and suggest
> +# the optimal cache size from a speed point of view.
> +# Minimum value: 0, maximum value: 9, default value: 0.
> +
> +LOOKUP_CACHE_SIZE = 2
> +
> +#---------------------------------------------------------------------------
> +# Build related configuration options
> +#---------------------------------------------------------------------------
> +
> +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
> +# documentation are documented, even if no documentation was available. Private
> +# class members and static file members will be hidden unless the
> +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
> +# Note: This will also disable the warnings about undocumented members that are
> +# normally produced when WARNINGS is set to YES.
> +# The default value is: NO.
> +
> +EXTRACT_ALL = YES
> +
> +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
> +# be included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_PRIVATE = NO
> +
> +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
> +# scope will be included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_PACKAGE = NO
> +
> +# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
> +# included in the documentation.
> +# The default value is: NO.
> +
> +EXTRACT_STATIC = YES
> +
> +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
> +# locally in source files will be included in the documentation. If set to NO
> +# only classes defined in header files are included. Does not have any effect
> +# for Java sources.
> +# The default value is: YES.
> +
> +EXTRACT_LOCAL_CLASSES = YES
> +
> +# This flag is only useful for Objective-C code. When set to YES local methods,
> +# which are defined in the implementation section but not in the interface are
> +# included in the documentation. If set to NO only methods in the interface are
> +# included.
> +# The default value is: NO.
> +
> +EXTRACT_LOCAL_METHODS = NO
> +
> +# If this flag is set to YES, the members of anonymous namespaces will be
> +# extracted and appear in the documentation as a namespace called
> +# 'anonymous_namespace{file}', where file will be replaced with the base name of
> +# the file that contains the anonymous namespace. By default anonymous namespace
> +# are hidden.
> +# The default value is: NO.
> +
> +EXTRACT_ANON_NSPACES = NO
> +
> +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
> +# undocumented members inside documented classes or files. If set to NO these
> +# members will be included in the various overviews, but no documentation
> +# section is generated. This option has no effect if EXTRACT_ALL is enabled.
> +# The default value is: NO.
> +
> +HIDE_UNDOC_MEMBERS = NO
> +
> +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
> +# undocumented classes that are normally visible in the class hierarchy. If set
> +# to NO these classes will be included in the various overviews. This option has
> +# no effect if EXTRACT_ALL is enabled.
> +# The default value is: NO.
> +
> +HIDE_UNDOC_CLASSES = NO
> +
> +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
> +# (class|struct|union) declarations. If set to NO these declarations will be
> +# included in the documentation.
> +# The default value is: NO.
> +
> +HIDE_FRIEND_COMPOUNDS = NO
> +
> +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
> +# documentation blocks found inside the body of a function. If set to NO these
> +# blocks will be appended to the function's detailed documentation block.
> +# The default value is: NO.
> +
> +HIDE_IN_BODY_DOCS = NO
> +
> +# The INTERNAL_DOCS tag determines if documentation that is typed after a
> +# \internal command is included. If the tag is set to NO then the documentation
> +# will be excluded. Set it to YES to include the internal documentation.
> +# The default value is: NO.
> +
> +INTERNAL_DOCS = NO
> +
> +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
> +# names in lower-case letters. If set to YES upper-case letters are also
> +# allowed. This is useful if you have classes or files whose names only differ
> +# in case and if your file system supports case sensitive file names. Windows
> +# and Mac users are advised to set this option to NO.
> +# The default value is: system dependent.
> +
> +CASE_SENSE_NAMES = YES
> +
> +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
> +# their full class and namespace scopes in the documentation. If set to YES the
> +# scope will be hidden.
> +# The default value is: NO.
> +
> +HIDE_SCOPE_NAMES = NO
> +
> +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
> +# the files that are included by a file in the documentation of that file.
> +# The default value is: YES.
> +
> +SHOW_INCLUDE_FILES = YES
> +
> +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
> +# grouped member an include statement to the documentation, telling the reader
> +# which file to include in order to use the member.
> +# The default value is: NO.
> +
> +SHOW_GROUPED_MEMB_INC = NO
> +
> +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
> +# files with double quotes in the documentation rather than with sharp brackets.
> +# The default value is: NO.
> +
> +FORCE_LOCAL_INCLUDES = NO
> +
> +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
> +# documentation for inline members.
> +# The default value is: YES.
> +
> +INLINE_INFO = YES
> +
> +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
> +# (detailed) documentation of file and class members alphabetically by member
> +# name. If set to NO the members will appear in declaration order.
> +# The default value is: YES.
> +
> +SORT_MEMBER_DOCS = YES
> +
> +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
> +# descriptions of file, namespace and class members alphabetically by member
> +# name. If set to NO the members will appear in declaration order. Note that
> +# this will also influence the order of the classes in the class list.
> +# The default value is: NO.
> +
> +SORT_BRIEF_DOCS = NO
> +
> +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
> +# (brief and detailed) documentation of class members so that constructors and
> +# destructors are listed first. If set to NO the constructors will appear in the
> +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
> +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
> +# member documentation.
> +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
> +# detailed member documentation.
> +# The default value is: NO.
> +
> +SORT_MEMBERS_CTORS_1ST = NO
> +
> +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
> +# of group names into alphabetical order. If set to NO the group names will
> +# appear in their defined order.
> +# The default value is: NO.
> +
> +SORT_GROUP_NAMES = NO
> +
> +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
> +# fully-qualified names, including namespaces. If set to NO, the class list will
> +# be sorted only by class name, not including the namespace part.
> +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
> +# Note: This option applies only to the class list, not to the alphabetical
> +# list.
> +# The default value is: NO.
> +
> +SORT_BY_SCOPE_NAME = NO
> +
> +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
> +# type resolution of all parameters of a function it will reject a match between
> +# the prototype and the implementation of a member function even if there is
> +# only one candidate or it is obvious which candidate to choose by doing a
> +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
> +# accept a match between prototype and implementation in such cases.
> +# The default value is: NO.
> +
> +STRICT_PROTO_MATCHING = NO
> +
> +# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
> +# todo list. This list is created by putting \todo commands in the
> +# documentation.
> +# The default value is: YES.
> +
> +GENERATE_TODOLIST = YES
> +
> +# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
> +# test list. This list is created by putting \test commands in the
> +# documentation.
> +# The default value is: YES.
> +
> +GENERATE_TESTLIST = YES
> +
> +# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
> +# list. This list is created by putting \bug commands in the documentation.
> +# The default value is: YES.
> +
> +GENERATE_BUGLIST = YES
> +
> +# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
> +# the deprecated list. This list is created by putting \deprecated commands in
> +# the documentation.
> +# The default value is: YES.
> +
> +GENERATE_DEPRECATEDLIST= YES
> +
> +# The ENABLED_SECTIONS tag can be used to enable conditional documentation
> +# sections, marked by \if <section_label> ... \endif and \cond <section_label>
> +# ... \endcond blocks.
> +
> +ENABLED_SECTIONS =
> +
> +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
> +# initial value of a variable or macro / define can have for it to appear in the
> +# documentation. If the initializer consists of more lines than specified here
> +# it will be hidden. Use a value of 0 to hide initializers completely. The
> +# appearance of the value of individual variables and macros / defines can be
> +# controlled using \showinitializer or \hideinitializer command in the
> +# documentation regardless of this setting.
> +# Minimum value: 0, maximum value: 10000, default value: 30.
> +
> +MAX_INITIALIZER_LINES = 30
> +
> +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
> +# the bottom of the documentation of classes and structs. If set to YES the list
> +# will mention the files that were used to generate the documentation.
> +# The default value is: YES.
> +
> +SHOW_USED_FILES = YES
> +
> +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
> +# will remove the Files entry from the Quick Index and from the Folder Tree View
> +# (if specified).
> +# The default value is: YES.
> +
> +SHOW_FILES = YES
> +
> +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
> +# page. This will remove the Namespaces entry from the Quick Index and from the
> +# Folder Tree View (if specified).
> +# The default value is: YES.
> +
> +SHOW_NAMESPACES = YES
> +
> +# The FILE_VERSION_FILTER tag can be used to specify a program or script that
> +# doxygen should invoke to get the current version for each file (typically from
> +# the version control system). Doxygen will invoke the program by executing (via
> +# popen()) the command command input-file, where command is the value of the
> +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
> +# by doxygen. Whatever the program writes to standard output is used as the file
> +# version. For an example see the documentation.
> +
> +FILE_VERSION_FILTER =
> +
> +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
> +# by doxygen. The layout file controls the global structure of the generated
> +# output files in an output format independent way. To create the layout file
> +# that represents doxygen's defaults, run doxygen with the -l option. You can
> +# optionally specify a file name after the option, if omitted DoxygenLayout.xml
> +# will be used as the name of the layout file.
> +#
> +# Note that if you run doxygen from a directory containing a file called
> +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
> +# tag is left empty.
> +
> +LAYOUT_FILE =
> +
> +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
> +# the reference definitions. This must be a list of .bib files. The .bib
> +# extension is automatically appended if omitted. This requires the bibtex tool
> +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
> +# For LaTeX the style of the bibliography can be controlled using
> +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
> +# search path. Do not use file names with spaces, bibtex cannot handle them. See
> +# also \cite for info how to create references.
> +
> +CITE_BIB_FILES =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to warning and progress messages
> +#---------------------------------------------------------------------------
> +
> +# The QUIET tag can be used to turn on/off the messages that are generated to
> +# standard output by doxygen. If QUIET is set to YES this implies that the
> +# messages are off.
> +# The default value is: NO.
> +
> +QUIET = NO
> +
> +# The WARNINGS tag can be used to turn on/off the warning messages that are
> +# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
> +# this implies that the warnings are on.
> +#
> +# Tip: Turn warnings on while writing the documentation.
> +# The default value is: YES.
> +
> +WARNINGS = NO
> +
> +# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
> +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
> +# will automatically be disabled.
> +# The default value is: YES.
> +
> +WARN_IF_UNDOCUMENTED = NO
> +
> +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
> +# potential errors in the documentation, such as not documenting some parameters
> +# in a documented function, or documenting parameters that don't exist or using
> +# markup commands wrongly.
> +# The default value is: YES.
> +
> +WARN_IF_DOC_ERROR = YES
> +
> +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
> +# are documented, but have no documentation for their parameters or return
> +# value. If set to NO doxygen will only warn about wrong or incomplete parameter
> +# documentation, but not about the absence of documentation.
> +# The default value is: NO.
> +
> +WARN_NO_PARAMDOC = NO
> +
> +# The WARN_FORMAT tag determines the format of the warning messages that doxygen
> +# can produce. The string should contain the $file, $line, and $text tags, which
> +# will be replaced by the file and line number from which the warning originated
> +# and the warning text. Optionally the format may contain $version, which will
> +# be replaced by the version of the file (if it could be obtained via
> +# FILE_VERSION_FILTER)
> +# The default value is: $file:$line: $text.
> +
> +WARN_FORMAT = "$file:$line: $text"
> +
> +# The WARN_LOGFILE tag can be used to specify a file to which warning and error
> +# messages should be written. If left blank the output is written to standard
> +# error (stderr).
> +
> +WARN_LOGFILE =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the input files
> +#---------------------------------------------------------------------------
> +
> +# The INPUT tag is used to specify the files and/or directories that contain
> +# documented source files. You may enter file names like myfile.cpp or
> +# directories like /usr/src/myproject. Separate the files or directories with
> +# spaces.
> +# Note: If this tag is empty the current directory is searched.
> +
> +INPUT = @abs_srcdir@/../include \
> + @abs_srcdir@/../lib \
> + @abs_srcdir@/doxygen.intro
> +
> +# This tag can be used to specify the character encoding of the source files
> +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
> +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
> +# documentation (see: http://www.gnu.org/software/libiconv) for the list of
> +# possible encodings.
> +# The default value is: UTF-8.
> +
> +INPUT_ENCODING = UTF-8
> +
> +# If the value of the INPUT tag contains directories, you can use the
> +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
> +# *.h) to filter out the source-files in the directories. If left blank the
> +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
> +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
> +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
> +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
> +# *.qsf, *.as and *.js.
> +
> +FILE_PATTERNS =
> +
> +# The RECURSIVE tag can be used to specify whether or not subdirectories should
> +# be searched for input files as well.
> +# The default value is: NO.
> +
> +RECURSIVE = YES
> +
> +# The EXCLUDE tag can be used to specify files and/or directories that should be
> +# excluded from the INPUT source files. This way you can easily exclude a
> +# subdirectory from a directory tree whose root is specified with the INPUT tag.
> +#
> +# Note that relative paths are relative to the directory from which doxygen is
> +# run.
> +
> +EXCLUDE =
> +
> +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
> +# directories that are symbolic links (a Unix file system feature) are excluded
> +# from the input.
> +# The default value is: NO.
> +
> +EXCLUDE_SYMLINKS = NO
> +
> +# If the value of the INPUT tag contains directories, you can use the
> +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
> +# certain files from those directories.
> +#
> +# Note that the wildcards are matched against the file with absolute path, so to
> +# exclude all test directories for example use the pattern */test/*
> +
> +EXCLUDE_PATTERNS =
> +
> +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
> +# (namespaces, classes, functions, etc.) that should be excluded from the
> +# output. The symbol name can be a fully qualified name, a word, or if the
> +# wildcard * is used, a substring. Examples: ANamespace, AClass,
> +# AClass::ANamespace, ANamespace::*Test
> +#
> +# Note that the wildcards are matched against the file with absolute path, so to
> +# exclude all test directories use the pattern */test/*
> +
> +EXCLUDE_SYMBOLS =
> +
> +# The EXAMPLE_PATH tag can be used to specify one or more files or directories
> +# that contain example code fragments that are included (see the \include
> +# command).
> +
> +EXAMPLE_PATH = @abs_srcdir@/../examples
> +
> +# If the value of the EXAMPLE_PATH tag contains directories, you can use the
> +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
> +# *.h) to filter out the source-files in the directories. If left blank all
> +# files are included.
> +
> +EXAMPLE_PATTERNS =
> +
> +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
> +# searched for input files to be used with the \include or \dontinclude commands
> +# irrespective of the value of the RECURSIVE tag.
> +# The default value is: NO.
> +
> +EXAMPLE_RECURSIVE = YES
> +
> +# The IMAGE_PATH tag can be used to specify one or more files or directories
> +# that contain images that are to be included in the documentation (see the
> +# \image command).
> +
> +IMAGE_PATH = @abs_srcdir@/img
> +
> +# The INPUT_FILTER tag can be used to specify a program that doxygen should
> +# invoke to filter for each input file. Doxygen will invoke the filter program
> +# by executing (via popen()) the command:
> +#
> +# <filter> <input-file>
> +#
> +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
> +# name of an input file. Doxygen will then use the output that the filter
> +# program writes to standard output. If FILTER_PATTERNS is specified, this tag
> +# will be ignored.
> +#
> +# Note that the filter must not add or remove lines; it is applied before the
> +# code is scanned, but not when the output code is generated. If lines are added
> +# or removed, the anchors will not be placed correctly.
> +
> +INPUT_FILTER =
> +
> +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
> +# basis. Doxygen will compare the file name with each pattern and apply the
> +# filter if there is a match. The filters are a list of the form: pattern=filter
> +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
> +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
> +# patterns match the file name, INPUT_FILTER is applied.
> +
> +FILTER_PATTERNS =
> +
> +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
> +# INPUT_FILTER ) will also be used to filter the input files that are used for
> +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
> +# The default value is: NO.
> +
> +FILTER_SOURCE_FILES = NO
> +
> +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
> +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
> +# it is also possible to disable source filtering for a specific pattern using
> +# *.ext= (so without naming a filter).
> +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
> +
> +FILTER_SOURCE_PATTERNS =
> +
> +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
> +# is part of the input, its contents will be placed on the main page
> +# (index.html). This can be useful if you have a project on for instance GitHub
> +# and want to reuse the introduction page also for the doxygen output.
> +
> +USE_MDFILE_AS_MAINPAGE =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to source browsing
> +#---------------------------------------------------------------------------
> +
> +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
> +# generated. Documented entities will be cross-referenced with these sources.
> +#
> +# Note: To get rid of all source code in the generated output, make sure that
> +# also VERBATIM_HEADERS is set to NO.
> +# The default value is: NO.
> +
> +SOURCE_BROWSER = YES
> +
> +# Setting the INLINE_SOURCES tag to YES will include the body of functions,
> +# classes and enums directly into the documentation.
> +# The default value is: NO.
> +
> +INLINE_SOURCES = NO
> +
> +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
> +# special comment blocks from generated source code fragments. Normal C, C++ and
> +# Fortran comments will always remain visible.
> +# The default value is: YES.
> +
> +STRIP_CODE_COMMENTS = NO
> +
> +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
> +# function all documented functions referencing it will be listed.
> +# The default value is: NO.
> +
> +REFERENCED_BY_RELATION = YES
> +
> +# If the REFERENCES_RELATION tag is set to YES then for each documented function
> +# all documented entities called/used by that function will be listed.
> +# The default value is: NO.
> +
> +REFERENCES_RELATION = YES
> +
> +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
> +# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
> +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
> +# link to the documentation.
> +# The default value is: YES.
> +
> +REFERENCES_LINK_SOURCE = YES
> +
> +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
> +# source code will show a tooltip with additional information such as prototype,
> +# brief description and links to the definition and documentation. Since this
> +# will make the HTML file larger and loading of large files a bit slower, you
> +# can opt to disable this feature.
> +# The default value is: YES.
> +# This tag requires that the tag SOURCE_BROWSER is set to YES.
> +
> +SOURCE_TOOLTIPS = YES
> +
> +# If the USE_HTAGS tag is set to YES then the references to source code will
> +# point to the HTML generated by the htags(1) tool instead of doxygen built-in
> +# source browser. The htags tool is part of GNU's global source tagging system
> +# (see http://www.gnu.org/software/global/global.html). You will need version
> +# 4.8.6 or higher.
> +#
> +# To use it do the following:
> +# - Install the latest version of global
> +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
> +# - Make sure the INPUT points to the root of the source tree
> +# - Run doxygen as normal
> +#
> +# Doxygen will invoke htags (and that will in turn invoke gtags), so these
> +# tools must be available from the command line (i.e. in the search path).
> +#
> +# The result: instead of the source browser generated by doxygen, the links to
> +# source code will now point to the output of htags.
> +# The default value is: NO.
> +# This tag requires that the tag SOURCE_BROWSER is set to YES.
> +
> +USE_HTAGS = NO
> +
> +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
> +# verbatim copy of the header file for each class for which an include is
> +# specified. Set to NO to disable this.
> +# See also: Section \class.
> +# The default value is: YES.
> +
> +VERBATIM_HEADERS = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the alphabetical class index
> +#---------------------------------------------------------------------------
> +
> +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
> +# compounds will be generated. Enable this if the project contains a lot of
> +# classes, structs, unions or interfaces.
> +# The default value is: YES.
> +
> +ALPHABETICAL_INDEX = YES
> +
> +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
> +# which the alphabetical index list will be split.
> +# Minimum value: 1, maximum value: 20, default value: 5.
> +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
> +
> +COLS_IN_ALPHA_INDEX = 4
> +
> +# In case all classes in a project start with a common prefix, all classes will
> +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
> +# can be used to specify a prefix (or a list of prefixes) that should be ignored
> +# while generating the index headers.
> +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
> +
> +IGNORE_PREFIX = polly::
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the HTML output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
> +# The default value is: YES.
> +
> +GENERATE_HTML = YES
> +
> +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: html.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_OUTPUT = html
> +
> +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
> +# generated HTML page (for example: .htm, .php, .asp).
> +# The default value is: .html.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_FILE_EXTENSION = .html
> +
> +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
> +# each generated HTML page. If the tag is left blank doxygen will generate a
> +# standard header.
> +#
> +# To get valid HTML the header file that includes any scripts and style sheets
> +# that doxygen needs, which is dependent on the configuration options used (e.g.
> +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
> +# default header using
> +# doxygen -w html new_header.html new_footer.html new_stylesheet.css
> +# YourConfigFile
> +# and then modify the file new_header.html. See also section "Doxygen usage"
> +# for information on how to generate the default header that doxygen normally
> +# uses.
> +# Note: The header is subject to change so you typically have to regenerate the
> +# default header when upgrading to a newer version of doxygen. For a description
> +# of the possible markers and block names see the documentation.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_HEADER =
> +
> +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
> +# generated HTML page. If the tag is left blank doxygen will generate a standard
> +# footer. See HTML_HEADER for more information on how to generate a default
> +# footer and what special commands can be used inside the footer. See also
> +# section "Doxygen usage" for information on how to generate the default footer
> +# that doxygen normally uses.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_FOOTER =
> +
> +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
> +# sheet that is used by each HTML page. It can be used to fine-tune the look of
> +# the HTML output. If left blank doxygen will generate a default style sheet.
> +# See also section "Doxygen usage" for information on how to generate the style
> +# sheet that doxygen normally uses.
> +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
> +# it is more robust and this tag (HTML_STYLESHEET) will in the future become
> +# obsolete.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_STYLESHEET =
> +
> +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
> +# defined cascading style sheet that is included after the standard style sheets
> +# created by doxygen. Using this option one can overrule certain style aspects.
> +# This is preferred over using HTML_STYLESHEET since it does not replace the
> +# standard style sheet and is therefor more robust against future updates.
> +# Doxygen will copy the style sheet file to the output directory. For an example
> +# see the documentation.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_EXTRA_STYLESHEET =
> +
> +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
> +# other source files which should be copied to the HTML output directory. Note
> +# that these files will be copied to the base HTML output directory. Use the
> +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
> +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
> +# files will be copied as-is; there are no commands or markers available.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_EXTRA_FILES =
> +
> +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
> +# will adjust the colors in the stylesheet and background images according to
> +# this color. Hue is specified as an angle on a colorwheel, see
> +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
> +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
> +# purple, and 360 is red again.
> +# Minimum value: 0, maximum value: 359, default value: 220.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_HUE = 220
> +
> +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
> +# in the HTML output. For a value of 0 the output will use grayscales only. A
> +# value of 255 will produce the most vivid colors.
> +# Minimum value: 0, maximum value: 255, default value: 100.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_SAT = 100
> +
> +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
> +# luminance component of the colors in the HTML output. Values below 100
> +# gradually make the output lighter, whereas values above 100 make the output
> +# darker. The value divided by 100 is the actual gamma applied, so 80 represents
> +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
> +# change the gamma.
> +# Minimum value: 40, maximum value: 240, default value: 80.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_COLORSTYLE_GAMMA = 80
> +
> +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
> +# page will contain the date and time when the page was generated. Setting this
> +# to NO can help when comparing the output of multiple runs.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_TIMESTAMP = YES
> +
> +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
> +# documentation will contain sections that can be hidden and shown after the
> +# page has loaded.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_DYNAMIC_SECTIONS = NO
> +
> +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
> +# shown in the various tree structured indices initially; the user can expand
> +# and collapse entries dynamically later on. Doxygen will expand the tree to
> +# such a level that at most the specified number of entries are visible (unless
> +# a fully collapsed tree already exceeds this amount). So setting the number of
> +# entries 1 will produce a full collapsed tree by default. 0 is a special value
> +# representing an infinite number of entries and will result in a full expanded
> +# tree by default.
> +# Minimum value: 0, maximum value: 9999, default value: 100.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +HTML_INDEX_NUM_ENTRIES = 100
> +
> +# If the GENERATE_DOCSET tag is set to YES, additional index files will be
> +# generated that can be used as input for Apple's Xcode 3 integrated development
> +# environment (see: http://developer.apple.com/tools/xcode/), introduced with
> +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
> +# Makefile in the HTML output directory. Running make will produce the docset in
> +# that directory and running make install will install the docset in
> +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
> +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
> +# for more information.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_DOCSET = NO
> +
> +# This tag determines the name of the docset feed. A documentation feed provides
> +# an umbrella under which multiple documentation sets from a single provider
> +# (such as a company or product suite) can be grouped.
> +# The default value is: Doxygen generated docs.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_FEEDNAME = "Doxygen generated docs"
> +
> +# This tag specifies a string that should uniquely identify the documentation
> +# set bundle. This should be a reverse domain-name style string, e.g.
> +# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_BUNDLE_ID = org.doxygen.Project
> +
> +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
> +# the documentation publisher. This should be a reverse domain-name style
> +# string, e.g. com.mycompany.MyDocSet.documentation.
> +# The default value is: org.doxygen.Publisher.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_PUBLISHER_ID = org.doxygen.Publisher
> +
> +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
> +# The default value is: Publisher.
> +# This tag requires that the tag GENERATE_DOCSET is set to YES.
> +
> +DOCSET_PUBLISHER_NAME = Publisher
> +
> +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
> +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
> +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
> +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
> +# Windows.
> +#
> +# The HTML Help Workshop contains a compiler that can convert all HTML output
> +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
> +# files are now used as the Windows 98 help format, and will replace the old
> +# Windows help format (.hlp) on all Windows platforms in the future. Compressed
> +# HTML files also contain an index, a table of contents, and you can search for
> +# words in the documentation. The HTML workshop also contains a viewer for
> +# compressed HTML files.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_HTMLHELP = NO
> +
> +# The CHM_FILE tag can be used to specify the file name of the resulting .chm
> +# file. You can add a path in front of the file if the result should not be
> +# written to the html output directory.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +CHM_FILE =
> +
> +# The HHC_LOCATION tag can be used to specify the location (absolute path
> +# including file name) of the HTML help compiler ( hhc.exe). If non-empty
> +# doxygen will try to run the HTML help compiler on the generated index.hhp.
> +# The file has to be specified with full path.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +HHC_LOCATION =
> +
> +# The GENERATE_CHI flag controls if a separate .chi index file is generated (
> +# YES) or that it should be included in the master .chm file ( NO).
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +GENERATE_CHI = NO
> +
> +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
> +# and project file content.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +CHM_INDEX_ENCODING =
> +
> +# The BINARY_TOC flag controls whether a binary table of contents is generated (
> +# YES) or a normal table of contents ( NO) in the .chm file.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +BINARY_TOC = NO
> +
> +# The TOC_EXPAND flag can be set to YES to add extra items for group members to
> +# the table of contents of the HTML help documentation and to the tree view.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
> +
> +TOC_EXPAND = NO
> +
> +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
> +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
> +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
> +# (.qch) of the generated HTML documentation.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_QHP = @polly_doxygen_generate_qhp@
> +
> +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
> +# the file name of the resulting .qch file. The path specified is relative to
> +# the HTML output folder.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QCH_FILE = @polly_doxygen_qch_filename@
> +
> +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
> +# Project output. For more information please see Qt Help Project / Namespace
> +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_NAMESPACE = @polly_doxygen_qhp_namespace@
> +
> +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
> +# Help Project output. For more information please see Qt Help Project / Virtual
> +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
> +# folders).
> +# The default value is: doc.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_VIRTUAL_FOLDER = doc
> +
> +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
> +# filter to add. For more information please see Qt Help Project / Custom
> +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
> +# filters).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_CUST_FILTER_NAME = @polly_doxygen_qhp_cust_filter_name@
> +
> +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
> +# custom filter to add. For more information please see Qt Help Project / Custom
> +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
> +# filters).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_CUST_FILTER_ATTRS = @polly_doxygen_qhp_cust_filter_attrs@
> +
> +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
> +# project's filter section matches. Qt Help Project / Filter Attributes (see:
> +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHP_SECT_FILTER_ATTRS =
> +
> +# The QHG_LOCATION tag can be used to specify the location of Qt's
> +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
> +# generated .qhp file.
> +# This tag requires that the tag GENERATE_QHP is set to YES.
> +
> +QHG_LOCATION = @polly_doxygen_qhelpgenerator_path@
> +
> +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
> +# generated, together with the HTML files, they form an Eclipse help plugin. To
> +# install this plugin and make it available under the help contents menu in
> +# Eclipse, the contents of the directory containing the HTML and XML files needs
> +# to be copied into the plugins directory of eclipse. The name of the directory
> +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
> +# After copying Eclipse needs to be restarted before the help appears.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_ECLIPSEHELP = NO
> +
> +# A unique identifier for the Eclipse help plugin. When installing the plugin
> +# the directory name containing the HTML and XML files should also have this
> +# name. Each documentation set should have its own identifier.
> +# The default value is: org.doxygen.Project.
> +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
> +
> +ECLIPSE_DOC_ID = org.doxygen.Project
> +
> +# If you want full control over the layout of the generated HTML pages it might
> +# be necessary to disable the index and replace it with your own. The
> +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
> +# of each HTML page. A value of NO enables the index and the value YES disables
> +# it. Since the tabs in the index contain the same information as the navigation
> +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +DISABLE_INDEX = NO
> +
> +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
> +# structure should be generated to display hierarchical information. If the tag
> +# value is set to YES, a side panel will be generated containing a tree-like
> +# index structure (just like the one that is generated for HTML Help). For this
> +# to work a browser that supports JavaScript, DHTML, CSS and frames is required
> +# (i.e. any modern browser). Windows users are probably better off using the
> +# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
> +# further fine-tune the look of the index. As an example, the default style
> +# sheet generated by doxygen has an example that shows how to put an image at
> +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
> +# the same information as the tab index, you could consider setting
> +# DISABLE_INDEX to YES when enabling this option.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +GENERATE_TREEVIEW = NO
> +
> +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
> +# doxygen will group on one line in the generated HTML documentation.
> +#
> +# Note that a value of 0 will completely suppress the enum values from appearing
> +# in the overview section.
> +# Minimum value: 0, maximum value: 20, default value: 4.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +ENUM_VALUES_PER_LINE = 4
> +
> +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
> +# to set the initial width (in pixels) of the frame in which the tree is shown.
> +# Minimum value: 0, maximum value: 1500, default value: 250.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +TREEVIEW_WIDTH = 250
> +
> +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
> +# external symbols imported via tag files in a separate window.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +EXT_LINKS_IN_WINDOW = NO
> +
> +# Use this tag to change the font size of LaTeX formulas included as images in
> +# the HTML documentation. When you change the font size after a successful
> +# doxygen run you need to manually remove any form_*.png images from the HTML
> +# output directory to force them to be regenerated.
> +# Minimum value: 8, maximum value: 50, default value: 10.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +FORMULA_FONTSIZE = 10
> +
> +# Use the FORMULA_TRANPARENT tag to determine whether or not the images
> +# generated for formulas are transparent PNGs. Transparent PNGs are not
> +# supported properly for IE 6.0, but are supported on all modern browsers.
> +#
> +# Note that when changing this option you need to delete any form_*.png files in
> +# the HTML output directory before the changes have effect.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +FORMULA_TRANSPARENT = YES
> +
> +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
> +# http://www.mathjax.org) which uses client side Javascript for the rendering
> +# instead of using prerendered bitmaps. Use this if you do not have LaTeX
> +# installed or if you want to formulas look prettier in the HTML output. When
> +# enabled you may also need to install MathJax separately and configure the path
> +# to it using the MATHJAX_RELPATH option.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +USE_MATHJAX = NO
> +
> +# When MathJax is enabled you can set the default output format to be used for
> +# the MathJax output. See the MathJax site (see:
> +# http://docs.mathjax.org/en/latest/output.html) for more details.
> +# Possible values are: HTML-CSS (which is slower, but has the best
> +# compatibility), NativeMML (i.e. MathML) and SVG.
> +# The default value is: HTML-CSS.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_FORMAT = HTML-CSS
> +
> +# When MathJax is enabled you need to specify the location relative to the HTML
> +# output directory using the MATHJAX_RELPATH option. The destination directory
> +# should contain the MathJax.js script. For instance, if the mathjax directory
> +# is located at the same level as the HTML output directory, then
> +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
> +# Content Delivery Network so you can quickly see the result without installing
> +# MathJax. However, it is strongly recommended to install a local copy of
> +# MathJax from http://www.mathjax.org before deployment.
> +# The default value is: http://cdn.mathjax.org/mathjax/latest.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
> +
> +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
> +# extension names that should be enabled during MathJax rendering. For example
> +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_EXTENSIONS =
> +
> +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
> +# of code that will be used on startup of the MathJax code. See the MathJax site
> +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
> +# example see the documentation.
> +# This tag requires that the tag USE_MATHJAX is set to YES.
> +
> +MATHJAX_CODEFILE =
> +
> +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
> +# the HTML output. The underlying search engine uses javascript and DHTML and
> +# should work on any modern browser. Note that when using HTML help
> +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
> +# there is already a search function so this one should typically be disabled.
> +# For large projects the javascript based search engine can be slow, then
> +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
> +# search using the keyboard; to jump to the search box use <access key> + S
> +# (what the <access key> is depends on the OS and browser, but it is typically
> +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
> +# key> to jump into the search results window, the results can be navigated
> +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
> +# the search. The filter options can be selected when the cursor is inside the
> +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
> +# to select a filter and <Enter> or <escape> to activate or cancel the filter
> +# option.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_HTML is set to YES.
> +
> +SEARCHENGINE = @enable_searchengine@
> +
> +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
> +# implemented using a web server instead of a web client using Javascript. There
> +# are two flavours of web server based searching depending on the
> +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
> +# searching and an index file used by the script. When EXTERNAL_SEARCH is
> +# enabled the indexing and searching needs to be provided by external tools. See
> +# the section "External Indexing and Searching" for details.
> +# The default value is: NO.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SERVER_BASED_SEARCH = @enable_server_based_search@
> +
> +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
> +# script for searching. Instead the search results are written to an XML file
> +# which needs to be processed by an external indexer. Doxygen will invoke an
> +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
> +# search results.
> +#
> +# Doxygen ships with an example indexer ( doxyindexer) and search engine
> +# (doxysearch.cgi) which are based on the open source search engine library
> +# Xapian (see: http://xapian.org/).
> +#
> +# See the section "External Indexing and Searching" for details.
> +# The default value is: NO.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTERNAL_SEARCH = @enable_external_search@
> +
> +# The SEARCHENGINE_URL should point to a search engine hosted by a web server
> +# which will return the search results when EXTERNAL_SEARCH is enabled.
> +#
> +# Doxygen ships with an example indexer ( doxyindexer) and search engine
> +# (doxysearch.cgi) which are based on the open source search engine library
> +# Xapian (see: http://xapian.org/). See the section "External Indexing and
> +# Searching" for details.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SEARCHENGINE_URL = @searchengine_url@
> +
> +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
> +# search data is written to a file for indexing by an external tool. With the
> +# SEARCHDATA_FILE tag the name of this file can be specified.
> +# The default file is: searchdata.xml.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +SEARCHDATA_FILE = searchdata.xml
> +
> +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
> +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
> +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
> +# projects and redirect the results back to the right project.
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTERNAL_SEARCH_ID = polly
> +
> +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
> +# projects other than the one defined by this configuration file, but that are
> +# all added to the same external search index. Each project needs to have a
> +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
> +# to a relative location where the documentation can be found. The format is:
> +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
> +# This tag requires that the tag SEARCHENGINE is set to YES.
> +
> +EXTRA_SEARCH_MAPPINGS = @extra_search_mappings@
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the LaTeX output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
> +# The default value is: YES.
> +
> +GENERATE_LATEX = NO
> +
> +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: latex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_OUTPUT = latex
> +
> +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
> +# invoked.
> +#
> +# Note that when enabling USE_PDFLATEX this option is only used for generating
> +# bitmaps for formulas in the HTML output, but not in the Makefile that is
> +# written to the output directory.
> +# The default file is: latex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_CMD_NAME = latex
> +
> +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
> +# index for LaTeX.
> +# The default file is: makeindex.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +MAKEINDEX_CMD_NAME = makeindex
> +
> +# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
> +# documents. This may be useful for small projects and may help to save some
> +# trees in general.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +COMPACT_LATEX = NO
> +
> +# The PAPER_TYPE tag can be used to set the paper type that is used by the
> +# printer.
> +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
> +# 14 inches) and executive (7.25 x 10.5 inches).
> +# The default value is: a4.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +PAPER_TYPE = a4
> +
> +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
> +# that should be included in the LaTeX output. To get the times font for
> +# instance you can specify
> +# EXTRA_PACKAGES=times
> +# If left blank no extra packages will be included.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +EXTRA_PACKAGES =
> +
> +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
> +# generated LaTeX document. The header should contain everything until the first
> +# chapter. If it is left blank doxygen will generate a standard header. See
> +# section "Doxygen usage" for information on how to let doxygen write the
> +# default header to a separate file.
> +#
> +# Note: Only use a user-defined header if you know what you are doing! The
> +# following commands have a special meaning inside the header: $title,
> +# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
> +# replace them by respectively the title of the page, the current date and time,
> +# only the current date, the version number of doxygen, the project name (see
> +# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_HEADER =
> +
> +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
> +# generated LaTeX document. The footer should contain everything after the last
> +# chapter. If it is left blank doxygen will generate a standard footer.
> +#
> +# Note: Only use a user-defined footer if you know what you are doing!
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_FOOTER =
> +
> +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
> +# other source files which should be copied to the LATEX_OUTPUT output
> +# directory. Note that the files will be copied as-is; there are no commands or
> +# markers available.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_EXTRA_FILES =
> +
> +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
> +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
> +# contain links (just like the HTML output) instead of page references. This
> +# makes the output suitable for online browsing using a PDF viewer.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +PDF_HYPERLINKS = YES
> +
> +# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
> +# the PDF file directly from the LaTeX files. Set this option to YES to get a
> +# higher quality PDF documentation.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +USE_PDFLATEX = YES
> +
> +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
> +# command to the generated LaTeX files. This will instruct LaTeX to keep running
> +# if errors occur, instead of asking the user for help. This option is also used
> +# when generating formulas in HTML.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_BATCHMODE = NO
> +
> +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
> +# index chapters (such as File Index, Compound Index, etc.) in the output.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_HIDE_INDICES = NO
> +
> +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
> +# code with syntax highlighting in the LaTeX output.
> +#
> +# Note that which sources are shown also depends on other settings such as
> +# SOURCE_BROWSER.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_SOURCE_CODE = NO
> +
> +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
> +# bibliography, e.g. plainnat, or ieeetr. See
> +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
> +# The default value is: plain.
> +# This tag requires that the tag GENERATE_LATEX is set to YES.
> +
> +LATEX_BIB_STYLE = plain
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the RTF output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
> +# RTF output is optimized for Word 97 and may not look too pretty with other RTF
> +# readers/editors.
> +# The default value is: NO.
> +
> +GENERATE_RTF = NO
> +
> +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: rtf.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_OUTPUT = rtf
> +
> +# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
> +# documents. This may be useful for small projects and may help to save some
> +# trees in general.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +COMPACT_RTF = NO
> +
> +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
> +# contain hyperlink fields. The RTF file will contain links (just like the HTML
> +# output) instead of page references. This makes the output suitable for online
> +# browsing using Word or some other Word compatible readers that support those
> +# fields.
> +#
> +# Note: WordPad (write) and others do not support links.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_HYPERLINKS = NO
> +
> +# Load stylesheet definitions from file. Syntax is similar to doxygen's config
> +# file, i.e. a series of assignments. You only have to provide replacements,
> +# missing definitions are set to their default value.
> +#
> +# See also section "Doxygen usage" for information on how to generate the
> +# default style sheet that doxygen normally uses.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_STYLESHEET_FILE =
> +
> +# Set optional variables used in the generation of an RTF document. Syntax is
> +# similar to doxygen's config file. A template extensions file can be generated
> +# using doxygen -e rtf extensionFile.
> +# This tag requires that the tag GENERATE_RTF is set to YES.
> +
> +RTF_EXTENSIONS_FILE =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the man page output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
> +# classes and files.
> +# The default value is: NO.
> +
> +GENERATE_MAN = NO
> +
> +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it. A directory man3 will be created inside the directory specified by
> +# MAN_OUTPUT.
> +# The default directory is: man.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_OUTPUT = man
> +
> +# The MAN_EXTENSION tag determines the extension that is added to the generated
> +# man pages. In case the manual section does not start with a number, the number
> +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
> +# optional.
> +# The default value is: .3.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_EXTENSION = .3
> +
> +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
> +# will generate one additional man file for each entity documented in the real
> +# man page(s). These additional files only source the real man page, but without
> +# them the man command would be unable to find the correct page.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_MAN is set to YES.
> +
> +MAN_LINKS = NO
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the XML output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
> +# captures the structure of the code including all documentation.
> +# The default value is: NO.
> +
> +GENERATE_XML = NO
> +
> +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
> +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
> +# it.
> +# The default directory is: xml.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_OUTPUT = xml
> +
> +# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a
> +# validating XML parser to check the syntax of the XML files.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_SCHEMA =
> +
> +# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
> +# validating XML parser to check the syntax of the XML files.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_DTD =
> +
> +# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
> +# listings (including syntax highlighting and cross-referencing information) to
> +# the XML output. Note that enabling this will significantly increase the size
> +# of the XML output.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_XML is set to YES.
> +
> +XML_PROGRAMLISTING = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the DOCBOOK output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
> +# that can be used to generate PDF.
> +# The default value is: NO.
> +
> +GENERATE_DOCBOOK = NO
> +
> +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
> +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
> +# front of it.
> +# The default directory is: docbook.
> +# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
> +
> +DOCBOOK_OUTPUT = docbook
> +
> +#---------------------------------------------------------------------------
> +# Configuration options for the AutoGen Definitions output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
> +# Definitions (see http://autogen.sf.net) file that captures the structure of
> +# the code including all documentation. Note that this feature is still
> +# experimental and incomplete at the moment.
> +# The default value is: NO.
> +
> +GENERATE_AUTOGEN_DEF = NO
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the Perl module output
> +#---------------------------------------------------------------------------
> +
> +# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
> +# file that captures the structure of the code including all documentation.
> +#
> +# Note that this feature is still experimental and incomplete at the moment.
> +# The default value is: NO.
> +
> +GENERATE_PERLMOD = NO
> +
> +# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
> +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
> +# output from the Perl module output.
> +# The default value is: NO.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_LATEX = NO
> +
> +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
> +# formatted so it can be parsed by a human reader. This is useful if you want to
> +# understand what is going on. On the other hand, if this tag is set to NO the
> +# size of the Perl module output will be much smaller and Perl will parse it
> +# just the same.
> +# The default value is: YES.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_PRETTY = YES
> +
> +# The names of the make variables in the generated doxyrules.make file are
> +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
> +# so different doxyrules.make files included by the same Makefile don't
> +# overwrite each other's variables.
> +# This tag requires that the tag GENERATE_PERLMOD is set to YES.
> +
> +PERLMOD_MAKEVAR_PREFIX =
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the preprocessor
> +#---------------------------------------------------------------------------
> +
> +# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
> +# C-preprocessor directives found in the sources and include files.
> +# The default value is: YES.
> +
> +ENABLE_PREPROCESSING = YES
> +
> +# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
> +# in the source code. If set to NO only conditional compilation will be
> +# performed. Macro expansion can be done in a controlled way by setting
> +# EXPAND_ONLY_PREDEF to YES.
> +# The default value is: NO.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +MACRO_EXPANSION = NO
> +
> +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
> +# the macro expansion is limited to the macros specified with the PREDEFINED and
> +# EXPAND_AS_DEFINED tags.
> +# The default value is: NO.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +EXPAND_ONLY_PREDEF = NO
> +
> +# If the SEARCH_INCLUDES tag is set to YES the includes files in the
> +# INCLUDE_PATH will be searched if a #include is found.
> +# The default value is: YES.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +SEARCH_INCLUDES = YES
> +
> +# The INCLUDE_PATH tag can be used to specify one or more directories that
> +# contain include files that are not input files but should be processed by the
> +# preprocessor.
> +# This tag requires that the tag SEARCH_INCLUDES is set to YES.
> +
> +INCLUDE_PATH = ../include
> +
> +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
> +# patterns (like *.h and *.hpp) to filter out the header-files in the
> +# directories. If left blank, the patterns specified with FILE_PATTERNS will be
> +# used.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +INCLUDE_FILE_PATTERNS =
> +
> +# The PREDEFINED tag can be used to specify one or more macro names that are
> +# defined before the preprocessor is started (similar to the -D option of e.g.
> +# gcc). The argument of the tag is a list of macros of the form: name or
> +# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
> +# is assumed. To prevent a macro definition from being undefined via #undef or
> +# recursively expanded use the := operator instead of the = operator.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +PREDEFINED =
> +
> +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
> +# tag can be used to specify a list of macro names that should be expanded. The
> +# macro definition that is found in the sources will be used. Use the PREDEFINED
> +# tag if you want to use a different macro definition that overrules the
> +# definition found in the source code.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +EXPAND_AS_DEFINED =
> +
> +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
> +# remove all refrences to function-like macros that are alone on a line, have an
> +# all uppercase name, and do not end with a semicolon. Such function macros are
> +# typically used for boiler-plate code, and will confuse the parser if not
> +# removed.
> +# The default value is: YES.
> +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
> +
> +SKIP_FUNCTION_MACROS = YES
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to external references
> +#---------------------------------------------------------------------------
> +
> +# The TAGFILES tag can be used to specify one or more tag files. For each tag
> +# file the location of the external documentation should be added. The format of
> +# a tag file without this location is as follows:
> +# TAGFILES = file1 file2 ...
> +# Adding location for the tag files is done as follows:
> +# TAGFILES = file1=loc1 "file2 = loc2" ...
> +# where loc1 and loc2 can be relative or absolute paths or URLs. See the
> +# section "Linking to external documentation" for more information about the use
> +# of tag files.
> +# Note: Each tag file must have an unique name (where the name does NOT include
> +# the path). If a tag file is not located in the directory in which doxygen is
> +# run, you must also specify the path to the tagfile here.
> +
> +TAGFILES =
> +
> +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
> +# tag file that is based on the input files it reads. See section "Linking to
> +# external documentation" for more information about the usage of tag files.
> +
> +GENERATE_TAGFILE =
> +
> +# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
> +# class index. If set to NO only the inherited external classes will be listed.
> +# The default value is: NO.
> +
> +ALLEXTERNALS = YES
> +
> +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
> +# the modules index. If set to NO, only the current project's groups will be
> +# listed.
> +# The default value is: YES.
> +
> +EXTERNAL_GROUPS = YES
> +
> +# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
> +# the related pages index. If set to NO, only the current project's pages will
> +# be listed.
> +# The default value is: YES.
> +
> +EXTERNAL_PAGES = YES
> +
> +# The PERL_PATH should be the absolute path and name of the perl script
> +# interpreter (i.e. the result of 'which perl').
> +# The default file (with absolute path) is: /usr/bin/perl.
> +
> +PERL_PATH = /usr/bin/perl
> +
> +#---------------------------------------------------------------------------
> +# Configuration options related to the dot tool
> +#---------------------------------------------------------------------------
> +
> +# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
> +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
> +# NO turns the diagrams off. Note that this option also works with HAVE_DOT
> +# disabled, but it is recommended to install and use dot, since it yields more
> +# powerful graphs.
> +# The default value is: YES.
> +
> +CLASS_DIAGRAMS = YES
> +
> +# You can define message sequence charts within doxygen comments using the \msc
> +# command. Doxygen will then run the mscgen tool (see:
> +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
> +# documentation. The MSCGEN_PATH tag allows you to specify the directory where
> +# the mscgen tool resides. If left empty the tool is assumed to be found in the
> +# default search path.
> +
> +MSCGEN_PATH =
> +
> +# You can include diagrams made with dia in doxygen documentation. Doxygen will
> +# then run dia to produce the diagram and insert it in the documentation. The
> +# DIA_PATH tag allows you to specify the directory where the dia binary resides.
> +# If left empty dia is assumed to be found in the default search path.
> +
> +DIA_PATH =
> +
> +# If set to YES, the inheritance and collaboration graphs will hide inheritance
> +# and usage relations if the target is undocumented or is not a class.
> +# The default value is: YES.
> +
> +HIDE_UNDOC_RELATIONS = NO
> +
> +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
> +# available from the path. This tool is part of Graphviz (see:
> +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
> +# Bell Labs. The other options in this section have no effect if this option is
> +# set to NO
> +# The default value is: NO.
> +
> +HAVE_DOT = YES
> +
> +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
> +# to run in parallel. When set to 0 doxygen will base this on the number of
> +# processors available in the system. You can set it explicitly to a value
> +# larger than 0 to get control over the balance between CPU load and processing
> +# speed.
> +# Minimum value: 0, maximum value: 32, default value: 0.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_NUM_THREADS = 0
> +
> +# When you want a differently looking font n the dot files that doxygen
> +# generates you can specify the font name using DOT_FONTNAME. You need to make
> +# sure dot is able to find the font, which can be done by putting it in a
> +# standard location or by setting the DOTFONTPATH environment variable or by
> +# setting DOT_FONTPATH to the directory containing the font.
> +# The default value is: Helvetica.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTNAME = Helvetica
> +
> +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
> +# dot graphs.
> +# Minimum value: 4, maximum value: 24, default value: 10.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTSIZE = 10
> +
> +# By default doxygen will tell dot to use the default font as specified with
> +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
> +# the path where dot can find it using this tag.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_FONTPATH =
> +
> +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
> +# each documented class showing the direct and indirect inheritance relations.
> +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CLASS_GRAPH = YES
> +
> +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
> +# graph for each documented class showing the direct and indirect implementation
> +# dependencies (inheritance, containment, and class references variables) of the
> +# class with other documented classes.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +COLLABORATION_GRAPH = YES
> +
> +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
> +# groups, showing the direct groups dependencies.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GROUP_GRAPHS = YES
> +
> +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
> +# collaboration diagrams in a style similar to the OMG's Unified Modeling
> +# Language.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +UML_LOOK = NO
> +
> +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
> +# class node. If there are many fields or methods and many nodes the graph may
> +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
> +# number of items for each type to make the size more manageable. Set this to 0
> +# for no limit. Note that the threshold may be exceeded by 50% before the limit
> +# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
> +# but if the number exceeds 15, the total amount of fields shown is limited to
> +# 10.
> +# Minimum value: 0, maximum value: 100, default value: 10.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +UML_LIMIT_NUM_FIELDS = 10
> +
> +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
> +# collaboration graphs will show the relations between templates and their
> +# instances.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +TEMPLATE_RELATIONS = YES
> +
> +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
> +# YES then doxygen will generate a graph for each documented file showing the
> +# direct and indirect include dependencies of the file with other documented
> +# files.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INCLUDE_GRAPH = YES
> +
> +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
> +# set to YES then doxygen will generate a graph for each documented file showing
> +# the direct and indirect include dependencies of the file with other documented
> +# files.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INCLUDED_BY_GRAPH = YES
> +
> +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
> +# dependency graph for every global function or class method.
> +#
> +# Note that enabling this option will significantly increase the time of a run.
> +# So in most cases it will be better to enable call graphs for selected
> +# functions only using the \callgraph command.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CALL_GRAPH = NO
> +
> +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
> +# dependency graph for every global function or class method.
> +#
> +# Note that enabling this option will significantly increase the time of a run.
> +# So in most cases it will be better to enable caller graphs for selected
> +# functions only using the \callergraph command.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +CALLER_GRAPH = NO
> +
> +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
> +# hierarchy of all classes instead of a textual one.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GRAPHICAL_HIERARCHY = YES
> +
> +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
> +# dependencies a directory has on other directories in a graphical way. The
> +# dependency relations are determined by the #include relations between the
> +# files in the directories.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DIRECTORY_GRAPH = YES
> +
> +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
> +# generated by dot.
> +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
> +# to make the SVG files visible in IE 9+ (other browsers do not have this
> +# requirement).
> +# Possible values are: png, jpg, gif and svg.
> +# The default value is: png.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_IMAGE_FORMAT = @DOT_IMAGE_FORMAT@
> +
> +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
> +# enable generation of interactive SVG images that allow zooming and panning.
> +#
> +# Note that this requires a modern browser other than Internet Explorer. Tested
> +# and working are Firefox, Chrome, Safari, and Opera.
> +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
> +# the SVG files visible. Older versions of IE do not have SVG support.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +INTERACTIVE_SVG = NO
> +
> +# The DOT_PATH tag can be used to specify the path where the dot tool can be
> +# found. If left blank, it is assumed the dot tool can be found in the path.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_PATH = @DOT@
> +
> +# The DOTFILE_DIRS tag can be used to specify one or more directories that
> +# contain dot files that are included in the documentation (see the \dotfile
> +# command).
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOTFILE_DIRS =
> +
> +# The MSCFILE_DIRS tag can be used to specify one or more directories that
> +# contain msc files that are included in the documentation (see the \mscfile
> +# command).
> +
> +MSCFILE_DIRS =
> +
> +# The DIAFILE_DIRS tag can be used to specify one or more directories that
> +# contain dia files that are included in the documentation (see the \diafile
> +# command).
> +
> +DIAFILE_DIRS =
> +
> +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
> +# that will be shown in the graph. If the number of nodes in a graph becomes
> +# larger than this value, doxygen will truncate the graph, which is visualized
> +# by representing a node as a red box. Note that doxygen if the number of direct
> +# children of the root node in a graph is already larger than
> +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
> +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
> +# Minimum value: 0, maximum value: 10000, default value: 50.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_GRAPH_MAX_NODES = 50
> +
> +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
> +# generated by dot. A depth value of 3 means that only nodes reachable from the
> +# root by following a path via at most 3 edges will be shown. Nodes that lay
> +# further from the root node will be omitted. Note that setting this option to 1
> +# or 2 may greatly reduce the computation time needed for large code bases. Also
> +# note that the size of a graph can be further restricted by
> +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
> +# Minimum value: 0, maximum value: 1000, default value: 0.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +MAX_DOT_GRAPH_DEPTH = 0
> +
> +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
> +# background. This is disabled by default, because dot on Windows does not seem
> +# to support this out of the box.
> +#
> +# Warning: Depending on the platform used, enabling this option may lead to
> +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
> +# read).
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_TRANSPARENT = YES
> +
> +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
> +# files in one run (i.e. multiple -o and -T options on the command line). This
> +# makes dot run faster, but since only newer versions of dot (>1.8.10) support
> +# this, this feature is disabled by default.
> +# The default value is: NO.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_MULTI_TARGETS = YES
> +
> +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
> +# explaining the meaning of the various boxes and arrows in the dot generated
> +# graphs.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +GENERATE_LEGEND = YES
> +
> +# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
> +# files that are used to generate the various graphs.
> +# The default value is: YES.
> +# This tag requires that the tag HAVE_DOT is set to YES.
> +
> +DOT_CLEANUP = YES
>
>
> _______________________________________________
> llvm-commits mailing list
> llvm-commits at lists.llvm.org
> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-commits
--
Johannes Doerfert
Researcher / PhD Student
Compiler Design Lab (Prof. Hack)
Saarland University, Computer Science
Building E1.3, Room 4.31
Tel. +49 (0)681 302-57521 : doerfert at cs.uni-saarland.de
Fax. +49 (0)681 302-3065 : http://www.cdl.uni-saarland.de/people/doerfert
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: not available
URL: <http://lists.llvm.org/pipermail/llvm-commits/attachments/20160204/0b7c112d/attachment.sig>
More information about the llvm-commits
mailing list