[llvm] r250528 - move test case to x86 directory because it specifies an x86 target

[Sanjay Patel via llvm-commits]

Author: spatel
Date: Fri Oct 16 12:18:07 2015
New Revision: 250528

URL: http://llvm.org/viewvc/llvm-project?rev=250528&view=rev
Log:
move test case to x86 directory because it specifies an x86 target

Added:
    llvm/trunk/test/Transforms/CodeGenPrepare/X86/select.ll
Removed:
    llvm/trunk/test/Transforms/CodeGenPrepare/select.ll

Added: llvm/trunk/test/Transforms/CodeGenPrepare/X86/select.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/CodeGenPrepare/X86/select.ll?rev=250528&view=auto
==============================================================================
--- llvm/trunk/test/Transforms/CodeGenPrepare/X86/select.ll (added)
+++ llvm/trunk/test/Transforms/CodeGenPrepare/X86/select.ll Fri Oct 16 12:18:07 2015
@@ -0,0 +1,114 @@
+; RUN: opt -codegenprepare -S < %s | FileCheck %s
+
+target triple = "x86_64-unknown-unknown"
+
+; Nothing to sink here, but this gets converted to a branch to
+; avoid stalling an out-of-order CPU on a predictable branch.
+
+define i32 @no_sink(double %a, double* %b, i32 %x, i32 %y)  {
+entry:
+  %load = load double, double* %b, align 8
+  %cmp = fcmp olt double %load, %a
+  %sel = select i1 %cmp, i32 %x, i32 %y
+  ret i32 %sel
+
+; CHECK-LABEL: @no_sink(
+; CHECK:    %load = load double, double* %b, align 8
+; CHECK:    %cmp = fcmp olt double %load, %a
+; CHECK:    br i1 %cmp, label %select.end, label %select.false
+; CHECK:  select.false:
+; CHECK:    br label %select.end
+; CHECK:  select.end:
+; CHECK:    %sel = phi i32 [ %x, %entry ], [ %y, %select.false ] 
+; CHECK:    ret i32 %sel
+}
+
+
+; An 'fdiv' is expensive, so sink it rather than speculatively execute it.
+
+define float @fdiv_true_sink(float %a, float %b) {
+entry:
+  %div = fdiv float %a, %b
+  %cmp = fcmp ogt float %a, 1.0
+  %sel = select i1 %cmp, float %div, float 2.0
+  ret float %sel
+
+; CHECK-LABEL: @fdiv_true_sink(
+; CHECK:    %cmp = fcmp ogt float %a, 1.0
+; CHECK:    br i1 %cmp, label %select.true.sink, label %select.end
+; CHECK:  select.true.sink:
+; CHECK:    %div = fdiv float %a, %b
+; CHECK:    br label %select.end
+; CHECK:  select.end:
+; CHECK:    %sel = phi float [ %div, %select.true.sink ], [ 2.000000e+00, %entry ]
+; CHECK:    ret float %sel
+}
+
+define float @fdiv_false_sink(float %a, float %b) {
+entry:
+  %div = fdiv float %a, %b
+  %cmp = fcmp ogt float %a, 3.0
+  %sel = select i1 %cmp, float 4.0, float %div
+  ret float %sel
+
+; CHECK-LABEL: @fdiv_false_sink(
+; CHECK:    %cmp = fcmp ogt float %a, 3.0
+; CHECK:    br i1 %cmp, label %select.end, label %select.false.sink
+; CHECK:  select.false.sink:
+; CHECK:    %div = fdiv float %a, %b
+; CHECK:    br label %select.end
+; CHECK:  select.end:
+; CHECK:    %sel = phi float [ 4.000000e+00, %entry ], [ %div, %select.false.sink ] 
+; CHECK:    ret float %sel
+}
+
+define float @fdiv_both_sink(float %a, float %b) {
+entry:
+  %div1 = fdiv float %a, %b
+  %div2 = fdiv float %b, %a
+  %cmp = fcmp ogt float %a, 5.0
+  %sel = select i1 %cmp, float %div1, float %div2
+  ret float %sel
+
+; CHECK-LABEL: @fdiv_both_sink(
+; CHECK:    %cmp = fcmp ogt float %a, 5.0
+; CHECK:    br i1 %cmp, label %select.true.sink, label %select.false.sink
+; CHECK:  select.true.sink:
+; CHECK:    %div1 = fdiv float %a, %b
+; CHECK:    br label %select.end
+; CHECK:  select.false.sink:
+; CHECK:    %div2 = fdiv float %b, %a
+; CHECK:    br label %select.end
+; CHECK:  select.end:
+; CHECK:    %sel = phi float [ %div1, %select.true.sink ], [ %div2, %select.false.sink ] 
+; CHECK:    ret float %sel
+}
+
+; An 'fadd' is not too expensive, so it's ok to speculate.
+
+define float @fadd_no_sink(float %a, float %b) {
+  %add = fadd float %a, %b
+  %cmp = fcmp ogt float 6.0, %a
+  %sel = select i1 %cmp, float %add, float 7.0 
+  ret float %sel
+
+; CHECK-LABEL: @fadd_no_sink(
+; CHECK:  %sel = select i1 %cmp, float %add, float 7.0 
+}
+
+; Possible enhancement: sinkability is only calculated with the direct
+; operand of the select, so we don't try to sink this. The fdiv cost is not
+; taken into account.
+
+define float @fdiv_no_sink(float %a, float %b) {
+entry:
+  %div = fdiv float %a, %b
+  %add = fadd float %div, %b
+  %cmp = fcmp ogt float %a, 1.0
+  %sel = select i1 %cmp, float %add, float 8.0
+  ret float %sel
+
+; CHECK-LABEL: @fdiv_no_sink(
+; CHECK:  %sel = select i1 %cmp, float %add, float 8.0 
+}
+

Removed: llvm/trunk/test/Transforms/CodeGenPrepare/select.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/test/Transforms/CodeGenPrepare/select.ll?rev=250527&view=auto
==============================================================================
--- llvm/trunk/test/Transforms/CodeGenPrepare/select.ll (original)
+++ llvm/trunk/test/Transforms/CodeGenPrepare/select.ll (removed)
@@ -1,114 +0,0 @@
-; RUN: opt -codegenprepare -S < %s | FileCheck %s
-
-target triple = "x86_64-unknown-unknown"
-
-; Nothing to sink here, but this gets converted to a branch to
-; avoid stalling an out-of-order CPU on a predictable branch.
-
-define i32 @no_sink(double %a, double* %b, i32 %x, i32 %y)  {
-entry:
-  %load = load double, double* %b, align 8
-  %cmp = fcmp olt double %load, %a
-  %sel = select i1 %cmp, i32 %x, i32 %y
-  ret i32 %sel
-
-; CHECK-LABEL: @no_sink(
-; CHECK:    %load = load double, double* %b, align 8
-; CHECK:    %cmp = fcmp olt double %load, %a
-; CHECK:    br i1 %cmp, label %select.end, label %select.false
-; CHECK:  select.false:
-; CHECK:    br label %select.end
-; CHECK:  select.end:
-; CHECK:    %sel = phi i32 [ %x, %entry ], [ %y, %select.false ] 
-; CHECK:    ret i32 %sel
-}
-
-
-; An 'fdiv' is expensive, so sink it rather than speculatively execute it.
-
-define float @fdiv_true_sink(float %a, float %b) {
-entry:
-  %div = fdiv float %a, %b
-  %cmp = fcmp ogt float %a, 1.0
-  %sel = select i1 %cmp, float %div, float 2.0
-  ret float %sel
-
-; CHECK-LABEL: @fdiv_true_sink(
-; CHECK:    %cmp = fcmp ogt float %a, 1.0
-; CHECK:    br i1 %cmp, label %select.true.sink, label %select.end
-; CHECK:  select.true.sink:
-; CHECK:    %div = fdiv float %a, %b
-; CHECK:    br label %select.end
-; CHECK:  select.end:
-; CHECK:    %sel = phi float [ %div, %select.true.sink ], [ 2.000000e+00, %entry ]
-; CHECK:    ret float %sel
-}
-
-define float @fdiv_false_sink(float %a, float %b) {
-entry:
-  %div = fdiv float %a, %b
-  %cmp = fcmp ogt float %a, 3.0
-  %sel = select i1 %cmp, float 4.0, float %div
-  ret float %sel
-
-; CHECK-LABEL: @fdiv_false_sink(
-; CHECK:    %cmp = fcmp ogt float %a, 3.0
-; CHECK:    br i1 %cmp, label %select.end, label %select.false.sink
-; CHECK:  select.false.sink:
-; CHECK:    %div = fdiv float %a, %b
-; CHECK:    br label %select.end
-; CHECK:  select.end:
-; CHECK:    %sel = phi float [ 4.000000e+00, %entry ], [ %div, %select.false.sink ] 
-; CHECK:    ret float %sel
-}
-
-define float @fdiv_both_sink(float %a, float %b) {
-entry:
-  %div1 = fdiv float %a, %b
-  %div2 = fdiv float %b, %a
-  %cmp = fcmp ogt float %a, 5.0
-  %sel = select i1 %cmp, float %div1, float %div2
-  ret float %sel
-
-; CHECK-LABEL: @fdiv_both_sink(
-; CHECK:    %cmp = fcmp ogt float %a, 5.0
-; CHECK:    br i1 %cmp, label %select.true.sink, label %select.false.sink
-; CHECK:  select.true.sink:
-; CHECK:    %div1 = fdiv float %a, %b
-; CHECK:    br label %select.end
-; CHECK:  select.false.sink:
-; CHECK:    %div2 = fdiv float %b, %a
-; CHECK:    br label %select.end
-; CHECK:  select.end:
-; CHECK:    %sel = phi float [ %div1, %select.true.sink ], [ %div2, %select.false.sink ] 
-; CHECK:    ret float %sel
-}
-
-; An 'fadd' is not too expensive, so it's ok to speculate.
-
-define float @fadd_no_sink(float %a, float %b) {
-  %add = fadd float %a, %b
-  %cmp = fcmp ogt float 6.0, %a
-  %sel = select i1 %cmp, float %add, float 7.0 
-  ret float %sel
-
-; CHECK-LABEL: @fadd_no_sink(
-; CHECK:  %sel = select i1 %cmp, float %add, float 7.0 
-}
-
-; Possible enhancement: sinkability is only calculated with the direct
-; operand of the select, so we don't try to sink this. The fdiv cost is not
-; taken into account.
-
-define float @fdiv_no_sink(float %a, float %b) {
-entry:
-  %div = fdiv float %a, %b
-  %add = fadd float %div, %b
-  %cmp = fcmp ogt float %a, 1.0
-  %sel = select i1 %cmp, float %add, float 8.0
-  ret float %sel
-
-; CHECK-LABEL: @fdiv_no_sink(
-; CHECK:  %sel = select i1 %cmp, float %add, float 8.0 
-}
-