[llvm-commits] [test-suite] r129526 - /test-suite/trunk/Makefile.rules
Andrew Trick
atrick at apple.com
Thu Apr 14 11:42:22 PDT 2011
Author: atrick
Date: Thu Apr 14 13:42:22 2011
New Revision: 129526
URL: http://llvm.org/viewvc/llvm-project?rev=129526&view=rev
Log:
whitespace
Modified:
test-suite/trunk/Makefile.rules
Modified: test-suite/trunk/Makefile.rules
URL: http://llvm.org/viewvc/llvm-project/test-suite/trunk/Makefile.rules?rev=129526&r1=129525&r2=129526&view=diff
==============================================================================
--- test-suite/trunk/Makefile.rules (original)
+++ test-suite/trunk/Makefile.rules Thu Apr 14 13:42:22 2011
@@ -4,7 +4,7 @@
#
# This file is distributed under the University of Illinois Open Source
# License. See LICENSE.TXT for details.
-#
+#
#===------------------------------------------------------------------------===#
#
# This file is included by all of the LLVM makefiles. This file defines common
@@ -15,8 +15,8 @@
# The following functionality can be set by setting incoming variables.
# The variable $(LEVEL) *must* be set:
#
-# 1. LEVEL - The level of the current subdirectory from the top of the
-# MagicStats view. This level should be expressed as a path, for
+# 1. LEVEL - The level of the current subdirectory from the top of the
+# MagicStats view. This level should be expressed as a path, for
# example, ../.. for two levels deep.
#
# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
@@ -29,7 +29,7 @@
# built, which are then built in any order.
#
# 4. Source - If specified, this sets the source code filenames. If this
-# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
+# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
# in the current directory. Also, if you want to build files in addition
# to the local files, you can use the ExtraSource variable
#
@@ -50,7 +50,7 @@
# placed.
#
# For building,
-# LLVM, LLVM_SRC_ROOT = PROJ_SRC_ROOT
+# LLVM, LLVM_SRC_ROOT = PROJ_SRC_ROOT
#
#===-----------------------------------------------------------------------====
@@ -61,8 +61,8 @@
###########################################################################
# Default Targets:
-# The following targets are the standard top level targets for
-# building.
+# The following targets are the standard top level targets for
+# building.
###########################################################################
# Ensure people re-run configure when it gets updated
@@ -100,19 +100,19 @@
# Print out the directories used for building
prdirs::
- @${ECHO} "Build Source Root: " $(PROJ_SRC_ROOT)
- @${ECHO} "Build Source Dir : " $(PROJ_SRC_DIR)
- @${ECHO} "Build Object Root: " $(PROJ_OBJ_ROOT)
- @${ECHO} "Build Object Dir : " $(PROJ_OBJ_DIR)
- @${ECHO} "LLVM Source Root: " $(LLVM_SRC_ROOT)
- @${ECHO} "LLVM Object Root: " $(LLVM_OBJ_ROOT)
- @${ECHO} "CONFIGURATION : " $(CONFIGURATION)
+ @${ECHO} "Build Source Root: " $(PROJ_SRC_ROOT)
+ @${ECHO} "Build Source Dir : " $(PROJ_SRC_DIR)
+ @${ECHO} "Build Object Root: " $(PROJ_OBJ_ROOT)
+ @${ECHO} "Build Object Dir : " $(PROJ_OBJ_DIR)
+ @${ECHO} "LLVM Source Root: " $(LLVM_SRC_ROOT)
+ @${ECHO} "LLVM Object Root: " $(LLVM_OBJ_ROOT)
+ @${ECHO} "CONFIGURATION : " $(CONFIGURATION)
###########################################################################
# Suffixes and implicit rules:
-# Empty out the list of suffixes, generate a list that is only
-# used by this Makefile, and cancel useless implicit rules. This
-# will hopefully speed up compilation a little bit.
+# Empty out the list of suffixes, generate a list that is only
+# used by this Makefile, and cancel useless implicit rules. This
+# will hopefully speed up compilation a little bit.
###########################################################################
.SUFFIXES:
.SUFFIXES: .c .cpp .h .hpp .y .l
@@ -129,12 +129,12 @@
###########################################################################
# Miscellaneous paths and commands:
-# This section defines various configuration macros, such as where
-# to find burg, tblgen, and libtool.
+# This section defines various configuration macros, such as where
+# to find burg, tblgen, and libtool.
###########################################################################
#--------------------------------------------------------------------
-# Variables derived from configuration options...
+# Variables derived from configuration options...
#--------------------------------------------------------------------
ifeq ($(ENABLE_PROFILING),1)
@@ -190,11 +190,11 @@
###########################################################################
# Library Locations:
-# These variables describe various library locations:
+# These variables describe various library locations:
#
-# DEST* = Location of where libraries that are built will be placed.
-# LLVM* = Location of LLVM libraries used for linking.
-# PROJ* = Location of previously built libraries used for linking.
+# DEST* = Location of where libraries that are built will be placed.
+# LLVM* = Location of LLVM libraries used for linking.
+# PROJ* = Location of previously built libraries used for linking.
###########################################################################
# Libraries that are being built
@@ -218,11 +218,11 @@
###########################################################################
# Tool Locations
-# These variables describe various tool locations:
+# These variables describe various tool locations:
#
-# DEST* = Location of where tools that are built will be placed.
-# LLVM* = Location of LLVM tools used for building.
-# PROJ* = Location of previously built tools used for linking.
+# DEST* = Location of where tools that are built will be placed.
+# LLVM* = Location of LLVM tools used for building.
+# PROJ* = Location of previously built tools used for linking.
###########################################################################
DESTTOOLDEBUG := $(PROJ_OBJ_ROOT)/Debug/bin
@@ -297,8 +297,8 @@
###########################################################################
# Miscellaneous paths and commands (part deux):
-# This section defines various configuration macros, such as where
-# to find burg, tblgen, and libtool.
+# This section defines various configuration macros, such as where
+# to find burg, tblgen, and libtool.
###########################################################################
#--------------------------------------------------------------------------
@@ -307,7 +307,7 @@
LLVMAS := $(LLVMTOOLCURRENT)/llvm-as$(EXEEXT)
# LLVM Tool Definitions (LLVMGCC, LLVMGXX, LLVMAS are provided by
-# Makefile.rules)
+# Makefile.rules)
LLI = $(LLVMTOOLCURRENT)/lli$(EXEEXT)
LLC = $(LLVMTOOLCURRENT)/llc$(EXEEXT)
LLVMLD = $(LLVMTOOLCURRENT)/llvm-ld$(EXEEXT)
@@ -456,7 +456,7 @@
#
# Link final executable
-# (Note that we always link with the C++ compiler).
+# (Note that we always link with the C++ compiler).
#
Link := $(LIBTOOL) --tag=CXX --mode=link $(CXX)
@@ -470,9 +470,9 @@
# are passed to the linker *before* the USEDLIBS options are passed.
# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib
ifdef TOOLLINKOPTSB
-LinkG := $(LinkG) $(TOOLLINKOPTSB)
-LinkO := $(LinkO) $(TOOLLINKOPTSB)
-LinkP := $(LinkP) $(TOOLLINKOPTSB)
+LinkG := $(LinkG) $(TOOLLINKOPTSB)
+LinkO := $(LinkO) $(TOOLLINKOPTSB)
+LinkP := $(LinkP) $(TOOLLINKOPTSB)
endif
# Create one .o file from a bunch of .o files...
@@ -490,8 +490,8 @@
endif
# Create dependency file from CPP file, send to stdout.
-Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
-DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
+Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
+DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS)
# Archive a bunch of .o files into a .a file...
AR = $(AR_PATH) cr
@@ -501,7 +501,7 @@
# Source includes all of the cpp files, and objects are derived from the
# source files...
# The local Makefile can list other Source files via ExtraSource = ...
-#
+#
ifndef Source
Source := $(notdir $(ExtraSource) $(wildcard $(SourceDir)/*.cpp \
$(SourceDir)/*.cc $(SourceDir)/*.c $(SourceDir)/*.y \
@@ -531,14 +531,14 @@
ifdef DIRS
all install clean test bytecode native stripped-bytecode install-bytecode::
- $(VERB) for dir in ${DIRS}; do \
- if [ ! -f $$dir/Makefile ]; \
- then \
- $(MKDIR) $$dir; \
- cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \
- done
+ $(VERB) for dir in ${DIRS}; do \
+ if [ ! -f $$dir/Makefile ]; \
+ then \
+ $(MKDIR) $$dir; \
+ cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \
+ done
endif
# Handle PARALLEL_DIRS
@@ -554,28 +554,28 @@
%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode \
%/.makestripped-bytecode %/.makeinstall-bytecode %/.makenative:
- $(VERB) if [ ! -f $(@D)/Makefile ]; \
- then \
- $(MKDIR) $(@D); \
- cp $(SourceDir)/$(@D)/Makefile $(@D)/Makefile; \
- fi; \
- $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS)
+ $(VERB) if [ ! -f $(@D)/Makefile ]; \
+ then \
+ $(MKDIR) $(@D); \
+ cp $(SourceDir)/$(@D)/Makefile $(@D)/Makefile; \
+ fi; \
+ $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS)
endif
# Handle directories that may or may not exist
ifdef OPTIONAL_DIRS
all install clean test bytecode stripped-bytecode install-bytecode::
- $(VERB) for dir in ${OPTIONAL_DIRS}; do \
- if [ -d $(SourceDir)/$$dir ]; \
- then\
- if [ ! -f $$dir/Makefile ]; \
- then \
- $(MKDIR) $$dir; \
- cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
- fi; \
- ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \
- fi \
- done
+ $(VERB) for dir in ${OPTIONAL_DIRS}; do \
+ if [ -d $(SourceDir)/$$dir ]; \
+ then\
+ if [ ! -f $$dir/Makefile ]; \
+ then \
+ $(MKDIR) $$dir; \
+ cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+ fi; \
+ ($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \
+ fi \
+ done
endif
#---------------------------------------------------------
@@ -585,13 +585,13 @@
install:: install-config-files
$(sysconfdir):
- $(MKDIR) $(sysconfdir)
+ $(MKDIR) $(sysconfdir)
install-config-files: $(sysconfdir) $(CONFIG_FILES)
- $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir)
- $(VERB)for file in $(CONFIG_FILES); do \
- $(INSTALL) $(SourceDir)/$${file} $(sysconfdir) ; \
- done
+ $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir)
+ $(VERB)for file in $(CONFIG_FILES); do \
+ $(INSTALL) $(SourceDir)/$${file} $(sysconfdir) ; \
+ done
endif
###########################################################################
@@ -614,7 +614,7 @@
# Install rule for making bytecode library directory if it does not exist.
# Trigger this by making libraries that need to be installed here depend on it.
$(DESTDIR)$(bytecode_libdir):
- $(MKDIR) $@
+ $(MKDIR) $@
ifdef LIBRARYNAME
@@ -638,7 +638,7 @@
#--------------------------------------------------------------------
# Library Targets
-# Modify the top level targets to build the desired libraries.
+# Modify the top level targets to build the desired libraries.
#--------------------------------------------------------------------
# dynamic target builds a shared object version of the library...
@@ -647,8 +647,8 @@
install-bytecode-library:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc
$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir)
- @${ECHO} ======= Installing $(LIBRARYNAME) bytecode library =======
- $(VERB)cp $< $@
+ @${ECHO} ======= Installing $(LIBRARYNAME) bytecode library =======
+ $(VERB)cp $< $@
# Does the library want a .o version built?
ifndef DONT_BUILD_RELINKED
@@ -680,89 +680,89 @@
# Rule for building bytecode libraries.
$(LIBNAME_BC): $(ObjectsBC) $(LibSubDirs) $(DESTLIBBYTECODE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) bytecode library
- $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts)
- @${ECHO} ======= Finished building $(LIBRARYNAME) bytecode library =======
+ @${ECHO} Linking $(LIBRARYNAME) bytecode library
+ $(VERB) $(LinkBCLib) -o $@ $(ObjectsBC) $(LibSubDirs) $(LibLinkOpts)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) bytecode library =======
#
# Rules for building dynamically linked libraries.
#
$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic release library
- $(VERB) $(Link) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic release library =======
+ @${ECHO} Linking $(LIBRARYNAME) dynamic release library
+ $(VERB) $(Link) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic release library =======
$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic profile library
- $(VERB) $(Link) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic profile library =======
+ @${ECHO} Linking $(LIBRARYNAME) dynamic profile library
+ $(VERB) $(Link) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic profile library =======
$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} Linking $(LIBRARYNAME) dynamic debug library
- $(VERB) $(Link) -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
- @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library =======
+ @${ECHO} Linking $(LIBRARYNAME) dynamic debug library
+ $(VERB) $(Link) -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(DESTLIBCURRENT)
+ @${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library =======
install-dynamic-library: $(LIBNAME_CUR)
- $(MKDIR) $(DESTDIR)$(libdir)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_CUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
- $(VERB) $(LIBTOOL) --finish $(DESTDIR)$(libdir)
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_CUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+ $(VERB) $(LIBTOOL) --finish $(DESTDIR)$(libdir)
#
# Rules for building static archive libraries.
#
$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive release library
- $(VERB)$(RM) -f $@
- $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static
- @${ECHO} Finished building $(LIBRARYNAME) archive release library =======
+ @${ECHO} Linking $(LIBRARYNAME) archive release library
+ $(VERB)$(RM) -f $@
+ $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static
+ @${ECHO} Finished building $(LIBRARYNAME) archive release library =======
$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive profile library
- @$(RM) -f $@
- $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static
- @${ECHO} ======= Finished building $(LIBRARYNAME) archive profile library =======
+ @${ECHO} Linking $(LIBRARYNAME) archive profile library
+ @$(RM) -f $@
+ $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static
+ @${ECHO} ======= Finished building $(LIBRARYNAME) archive profile library =======
$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} Linking $(LIBRARYNAME) archive debug library
- @$(RM) -f $@
- $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
- @${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library =======
+ @${ECHO} Linking $(LIBRARYNAME) archive debug library
+ @$(RM) -f $@
+ $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
+ @${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library =======
install-archive-library: $(LIBNAME_ACUR)
- $(MKDIR) $(DESTDIR)$(libdir)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_ACUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_ACUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
#
# Rules for building .o libraries.
#
-# JTC:
-# Note that for this special case, we specify the actual object files
-# instead of their libtool counterparts. This is because libtool
-# doesn't want to generate a reloadable object file unless it is given
-# .o files explicitly.
+# JTC:
+# Note that for this special case, we specify the actual object files
+# instead of their libtool counterparts. This is because libtool
+# doesn't want to generate a reloadable object file unless it is given
+# .o files explicitly.
#
-# Note that we're making an assumption here: If we build a .lo file,
-# its corresponding .o file will be placed in the same directory.
+# Note that we're making an assumption here: If we build a .lo file,
+# its corresponding .o file will be placed in the same directory.
#
-# I think that is safe.
+# I think that is safe.
#
$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs)
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsO) $(LibSubDirs)
$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs)
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsP) $(LibSubDirs)
$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
- @${ECHO} "Linking `basename $@`"
- $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
+ @${ECHO} "Linking `basename $@`"
+ $(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
install-single-object-library: $(LIBNAME_OBJCUR)
- $(MKDIR) $(DESTDIR)$(libdir)
- $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_OBJCUR) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
+ $(MKDIR) $(DESTDIR)$(libdir)
+ $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_OBJCUR) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
endif
@@ -821,8 +821,8 @@
#
# Libtool link options:
-# Ensure that all binaries have their symbols exported so that they can
-# by dlsym'ed.
+# Ensure that all binaries have their symbols exported so that they can
+# by dlsym'ed.
#
LINK_OPTS := -export-dynamic $(TOOLLINKOPTS)
@@ -838,27 +838,27 @@
all:: $(TOOLEXENAMES)
clean::
- $(VERB) $(RM) -f $(TOOLEXENAMES)
+ $(VERB) $(RM) -f $(TOOLEXENAMES)
$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(LLVM_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir
- @${ECHO} Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)
- $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) debug executable $(STRIP_WARN_MSG) =======
+ @${ECHO} Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)
+ $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) debug executable $(STRIP_WARN_MSG) =======
$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(LLVM_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir
- @${ECHO} Linking $(TOOLNAME) release executable
- $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) release executable =======
+ @${ECHO} Linking $(TOOLNAME) release executable
+ $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) release executable =======
$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(LLVM_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
- @${ECHO} Linking $(TOOLNAME) profile executable
- $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
- @${ECHO} ======= Finished building $(TOOLNAME) profile executable =======
+ @${ECHO} Linking $(TOOLNAME) profile executable
+ $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
+ @${ECHO} ======= Finished building $(TOOLNAME) profile executable =======
install:: $(TOOLEXENAMES)
- @${ECHO} Installing $(TOOLEXENAMES) to $(DESTDIR)$(bindir)
- $(VERB)$(MKDIR) $(DESTDIR)$(bindir)
- $(VERB)$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) -c -m 0755 $(TOOLEXENAMES) $(DESTDIR)$(bindir)/$(TOOLNAME)
+ @${ECHO} Installing $(TOOLEXENAMES) to $(DESTDIR)$(bindir)
+ $(VERB)$(MKDIR) $(DESTDIR)$(bindir)
+ $(VERB)$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) -c -m 0755 $(TOOLEXENAMES) $(DESTDIR)$(bindir)/$(TOOLNAME)
endif
@@ -869,31 +869,31 @@
# Create .lo files in the ObjectFiles directory from the .cpp and .c files...
$(PROJ_OBJ_DIR)/Release/%.lo: %.cpp $(PROJ_OBJ_DIR)/Release/.dir
- $(CompileO) $< -o $@
+ $(CompileO) $< -o $@
$(PROJ_OBJ_DIR)/Release/%.lo: %.c $(PROJ_OBJ_DIR)/Release/.dir
- $(CompileCO) $< -o $@
+ $(CompileCO) $< -o $@
$(PROJ_OBJ_DIR)/Profile/%.lo: %.cpp $(PROJ_OBJ_DIR)/Profile/.dir
- $(CompileP) $< -o $@
+ $(CompileP) $< -o $@
$(PROJ_OBJ_DIR)/Profile/%.lo: %.c $(PROJ_OBJ_DIR)/Profile/.dir
- $(CompileCP) $< -o $@
+ $(CompileCP) $< -o $@
$(PROJ_OBJ_DIR)/Debug/%.lo: %.cpp $(PROJ_OBJ_DIR)/Debug/.dir
- $(CompileG) $< -o $@
+ $(CompileG) $< -o $@
-$(PROJ_OBJ_DIR)/Debug/%.lo: %.c $(PROJ_OBJ_DIR)/Debug/.dir
- $(CompileCG) $< -o $@
+$(PROJ_OBJ_DIR)/Debug/%.lo: %.c $(PROJ_OBJ_DIR)/Debug/.dir
+ $(CompileCG) $< -o $@
$(PROJ_OBJ_DIR)/BytecodeObj/%.bc: %.cpp $(PROJ_OBJ_DIR)/BytecodeObj/.dir $(LCC_PROGRAMS)
- $(LCXX) $(CPPFLAGS) -c $< -o $@
+ $(LCXX) $(CPPFLAGS) -c $< -o $@
$(PROJ_OBJ_DIR)/BytecodeObj/%.bc: %.c $(PROJ_OBJ_DIR)/BytecodeObj/.dir $(LCC_PROGRAMS)
- $(LCC) $(CPPFLAGS) -c $< -o $@
+ $(LCC) $(CPPFLAGS) -c $< -o $@
$(PROJ_OBJ_DIR)/BytecodeObj/%.bc: %.ll $(PROJ_OBJ_DIR)/BytecodeObj/.dir $(LLVMAS)
- $(LLVMAS) $< -o $@
+ $(LLVMAS) $< -o $@
#
@@ -914,40 +914,40 @@
# FIXME. (f.e. char Buffer[10000] )
#
%.cpp: %.l
- @${ECHO} Flexing $<
- $(VERB) $(FLEX) -t $< | \
+ @${ECHO} Flexing $<
+ $(VERB) $(FLEX) -t $< | \
$(SED) '/^find_rule/d' | \
$(SED) 's/void yyunput/inline void yyunput/' | \
$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
$(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
> $@.tmp
- $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@
- @# remove the output of flex if it didn't get moved over...
- @rm -f $@.tmp
+ $(VERB) cmp -s $@ $@.tmp > /dev/null || ${MV} -f $@.tmp $@
+ @# remove the output of flex if it didn't get moved over...
+ @rm -f $@.tmp
# Rule for building the bison parsers...
%.c: %.y # Cancel built-in rules for yacc
%.h: %.y # Cancel built-in rules for yacc
%.cpp %.h : %.y
- @${ECHO} "Bisoning `basename $<`"
- $(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
- $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp
- $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h
- @# If the files were not updated, don't leave them lying around...
- @rm -f $*.tab.c $*.tab.h
+ @${ECHO} "Bisoning `basename $<`"
+ $(VERB) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
+ $(VERB) cmp -s $*.tab.c $*.cpp > /dev/null || ${MV} -f $*.tab.c $*.cpp
+ $(VERB) cmp -s $*.tab.h $*.h > /dev/null || ${MV} -f $*.tab.h $*.h
+ @# If the files were not updated, don't leave them lying around...
+ @rm -f $*.tab.c $*.tab.h
# To create the directories...
%/.dir:
- $(VERB) ${MKDIR} $* > /dev/null
- @$(DATE) > $@
+ $(VERB) ${MKDIR} $* > /dev/null
+ @$(DATE) > $@
# To create postscript files from dot files...
ifneq ($(DOT),false)
%.ps: %.dot
- ${DOT} -Tps < $< > $@
+ ${DOT} -Tps < $< > $@
else
%.ps: %.dot
- ${ECHO} "Cannot build $@: The program dot is not installed"
+ ${ECHO} "Cannot build $@: The program dot is not installed"
endif
#
@@ -959,19 +959,19 @@
# 'make clean' nukes the tree
clean::
- $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/Debug $(PROJ_OBJ_DIR)/Release
- $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/Profile $(PROJ_OBJ_DIR)/Depend
- $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/BytecodeObj
- $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
+ $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/Debug $(PROJ_OBJ_DIR)/Release
+ $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/Profile $(PROJ_OBJ_DIR)/Depend
+ $(VERB) $(RM) -rf $(PROJ_OBJ_DIR)/BytecodeObj
+ $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
- $(VERB) $(RM) -f *$(SHLIBEXT)
+ $(VERB) $(RM) -f *$(SHLIBEXT)
endif
- $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
+ $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
###########################################################################
# C/C++ Dependencies
-# Define variables and rules that generate header file dependencies
-# from C/C++ source files.
+# Define variables and rules that generate header file dependencies
+# from C/C++ source files.
###########################################################################
ifndef DISABLE_AUTO_DEPENDENCIES
@@ -984,30 +984,30 @@
# Create dependencies for the *.cpp files...
$(PROJ_OBJ_DIR)/Depend/%.d: %.cpp $(PROJ_OBJ_DIR)/Depend/.dir
- $(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(PROJ_OBJ_DIR)/Release/& $(PROJ_OBJ_DIR)/Profile/& $(PROJ_OBJ_DIR)/Debug/& $(PROJ_OBJ_DIR)/Depend/$(@F)|g' > $@
+ $(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(PROJ_OBJ_DIR)/Release/& $(PROJ_OBJ_DIR)/Profile/& $(PROJ_OBJ_DIR)/Debug/& $(PROJ_OBJ_DIR)/Depend/$(@F)|g' > $@
# Create dependencies for the *.c files...
$(PROJ_OBJ_DIR)/Depend/%.d: %.c $(PROJ_OBJ_DIR)/Depend/.dir
- $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(PROJ_OBJ_DIR)/Release/& $(PROJ_OBJ_DIR)/Profile/& $(PROJ_OBJ_DIR)/Debug/& $(PROJ_OBJ_DIR)/Depend/$(@F)|g' > $@
+ $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(PROJ_OBJ_DIR)/Release/& $(PROJ_OBJ_DIR)/Profile/& $(PROJ_OBJ_DIR)/Debug/& $(PROJ_OBJ_DIR)/Depend/$(@F)|g' > $@
#
# Autoconf Dependencies.
#
ifeq ($(HAS_LLVM),1)
$(LLVM_OBJ_ROOT)/config.status:: $(LLVM_SRC_ROOT)/configure
- @${ECHO} "****************************************************************"
- @${ECHO} " You need to re-run $(LLVM_SRC_ROOT)/configure"
- @${ECHO} " in directory $(LLVM_OBJ_ROOT)"
- @${ECHO} "****************************************************************"
- $(VERB) exit 1
+ @${ECHO} "****************************************************************"
+ @${ECHO} " You need to re-run $(LLVM_SRC_ROOT)/configure"
+ @${ECHO} " in directory $(LLVM_OBJ_ROOT)"
+ @${ECHO} "****************************************************************"
+ $(VERB) exit 1
endif
# If the Makefile in the source tree has been updated, copy it over into the
# build tree.
Makefile :: $(PROJ_SRC_DIR)/Makefile
- @${ECHO} "===== Updating Makefile from source dir: `dirname $<` ====="
- $(MKDIR) $(@D)
- cp -f $< $@
+ @${ECHO} "===== Updating Makefile from source dir: `dirname $<` ====="
+ $(MKDIR) $(@D)
+ cp -f $< $@
#
# Include dependencies generated from C/C++ source files, but not if we
@@ -1027,4 +1027,4 @@
# General debugging rule, use 'make dbg-print-XXX' to print the
# definition, value and origin of XXX.
make-print-%:
- $(error PRINT: $(value $*) = "$($*)" (from $(origin $*)))
+ $(error PRINT: $(value $*) = "$($*)" (from $(origin $*)))
More information about the llvm-commits
mailing list