[llvm-commits] [llvm-gcc-4.2] r43913 [79/80] - in /llvm-gcc-4.2/trunk: boehm-gc/ boehm-gc/Mac_files/ boehm-gc/cord/ boehm-gc/doc/ boehm-gc/include/ boehm-gc/include/private/ boehm-gc/tests/ libffi/ libffi/include/ libffi/src/ libffi/src/alpha/ libffi/src/arm/ libffi/src/cris/ libffi/src/frv/ libffi/src/ia64/ libffi/src/m32r/ libffi/src/m68k/ libffi/src/mips/ libffi/src/pa/ libffi/src/powerpc/ libffi/src/s390/ libffi/src/sh/ libffi/src/sh64/ libffi/src/sparc/ libffi/src/x86/ libffi/testsuite/ libffi/testsuite/config/ li...
Bill Wendling
isanbard at gmail.com
Thu Nov 8 14:57:11 PST 2007
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/minizip.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/minizip.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/minizip.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/minizip.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,420 @@
+/*
+ minizip.c
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+#ifdef WIN32
+#define USEWIN32IOAPI
+#include "iowin32.h"
+#endif
+
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ int ret = 0;
+ {
+ FILETIME ftLocal;
+ HANDLE hFind;
+ WIN32_FIND_DATA ff32;
+
+ hFind = FindFirstFile(f,&ff32);
+ if (hFind != INVALID_HANDLE_VALUE)
+ {
+ FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+ FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+ FindClose(hFind);
+ ret = 1;
+ }
+ }
+ return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ int ret=0;
+ struct stat s; /* results of stat() */
+ struct tm* filedate;
+ time_t tm_t=0;
+
+ if (strcmp(f,"-")!=0)
+ {
+ char name[MAXFILENAME+1];
+ int len = strlen(f);
+ if (len > MAXFILENAME)
+ len = MAXFILENAME;
+
+ strncpy(name, f,MAXFILENAME-1);
+ /* strncpy doesnt append the trailing NULL, of the string is too long. */
+ name[ MAXFILENAME ] = '\0';
+
+ if (name[len - 1] == '/')
+ name[len - 1] = '\0';
+ /* not all systems allow stat'ing a file with / appended */
+ if (stat(name,&s)==0)
+ {
+ tm_t = s.st_mtime;
+ ret = 1;
+ }
+ }
+ filedate = localtime(&tm_t);
+
+ tmzip->tm_sec = filedate->tm_sec;
+ tmzip->tm_min = filedate->tm_min;
+ tmzip->tm_hour = filedate->tm_hour;
+ tmzip->tm_mday = filedate->tm_mday;
+ tmzip->tm_mon = filedate->tm_mon ;
+ tmzip->tm_year = filedate->tm_year;
+
+ return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+ char *f; /* name of file to get info on */
+ tm_zip *tmzip; /* return value: access, modific. and creation times */
+ uLong *dt; /* dostime */
+{
+ return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+ const char* filename;
+{
+ FILE* ftestexist;
+ int ret = 1;
+ ftestexist = fopen(filename,"rb");
+ if (ftestexist==NULL)
+ ret = 0;
+ else
+ fclose(ftestexist);
+ return ret;
+}
+
+void do_banner()
+{
+ printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
+ printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+}
+
+void do_help()
+{
+ printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] file.zip [files_to_add]\n\n" \
+ " -o Overwrite existing file.zip\n" \
+ " -a Append to existing file.zip\n" \
+ " -0 Store only\n" \
+ " -1 Compress faster\n" \
+ " -9 Compress better\n\n");
+}
+
+/* calculate the CRC32 of a file,
+ because to encrypt a file, we need known the CRC32 of the file before */
+int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
+{
+ unsigned long calculate_crc=0;
+ int err=ZIP_OK;
+ FILE * fin = fopen(filenameinzip,"rb");
+ unsigned long size_read = 0;
+ unsigned long total_read = 0;
+ if (fin==NULL)
+ {
+ err = ZIP_ERRNO;
+ }
+
+ if (err == ZIP_OK)
+ do
+ {
+ err = ZIP_OK;
+ size_read = (int)fread(buf,1,size_buf,fin);
+ if (size_read < size_buf)
+ if (feof(fin)==0)
+ {
+ printf("error in reading %s\n",filenameinzip);
+ err = ZIP_ERRNO;
+ }
+
+ if (size_read>0)
+ calculate_crc = crc32(calculate_crc,buf,size_read);
+ total_read += size_read;
+
+ } while ((err == ZIP_OK) && (size_read>0));
+
+ if (fin)
+ fclose(fin);
+
+ *result_crc=calculate_crc;
+ printf("file %s crc %x\n",filenameinzip,calculate_crc);
+ return err;
+}
+
+int main(argc,argv)
+ int argc;
+ char *argv[];
+{
+ int i;
+ int opt_overwrite=0;
+ int opt_compress_level=Z_DEFAULT_COMPRESSION;
+ int zipfilenamearg = 0;
+ char filename_try[MAXFILENAME+16];
+ int zipok;
+ int err=0;
+ int size_buf=0;
+ void* buf=NULL;
+ const char* password=NULL;
+
+
+ do_banner();
+ if (argc==1)
+ {
+ do_help();
+ return 0;
+ }
+ else
+ {
+ for (i=1;i<argc;i++)
+ {
+ if ((*argv[i])=='-')
+ {
+ const char *p=argv[i]+1;
+
+ while ((*p)!='\0')
+ {
+ char c=*(p++);;
+ if ((c=='o') || (c=='O'))
+ opt_overwrite = 1;
+ if ((c=='a') || (c=='A'))
+ opt_overwrite = 2;
+ if ((c>='0') && (c<='9'))
+ opt_compress_level = c-'0';
+
+ if (((c=='p') || (c=='P')) && (i+1<argc))
+ {
+ password=argv[i+1];
+ i++;
+ }
+ }
+ }
+ else
+ if (zipfilenamearg == 0)
+ zipfilenamearg = i ;
+ }
+ }
+
+ size_buf = WRITEBUFFERSIZE;
+ buf = (void*)malloc(size_buf);
+ if (buf==NULL)
+ {
+ printf("Error allocating memory\n");
+ return ZIP_INTERNALERROR;
+ }
+
+ if (zipfilenamearg==0)
+ zipok=0;
+ else
+ {
+ int i,len;
+ int dot_found=0;
+
+ zipok = 1 ;
+ strncpy(filename_try, argv[zipfilenamearg],MAXFILENAME-1);
+ /* strncpy doesnt append the trailing NULL, of the string is too long. */
+ filename_try[ MAXFILENAME ] = '\0';
+
+ len=(int)strlen(filename_try);
+ for (i=0;i<len;i++)
+ if (filename_try[i]=='.')
+ dot_found=1;
+
+ if (dot_found==0)
+ strcat(filename_try,".zip");
+
+ if (opt_overwrite==2)
+ {
+ /* if the file don't exist, we not append file */
+ if (check_exist_file(filename_try)==0)
+ opt_overwrite=1;
+ }
+ else
+ if (opt_overwrite==0)
+ if (check_exist_file(filename_try)!=0)
+ {
+ char rep=0;
+ do
+ {
+ char answer[128];
+ int ret;
+ printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+ ret = scanf("%1s",answer);
+ if (ret != 1)
+ {
+ exit(EXIT_FAILURE);
+ }
+ rep = answer[0] ;
+ if ((rep>='a') && (rep<='z'))
+ rep -= 0x20;
+ }
+ while ((rep!='Y') && (rep!='N') && (rep!='A'));
+ if (rep=='N')
+ zipok = 0;
+ if (rep=='A')
+ opt_overwrite = 2;
+ }
+ }
+
+ if (zipok==1)
+ {
+ zipFile zf;
+ int errclose;
+# ifdef USEWIN32IOAPI
+ zlib_filefunc_def ffunc;
+ fill_win32_filefunc(&ffunc);
+ zf = zipOpen2(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+# else
+ zf = zipOpen(filename_try,(opt_overwrite==2) ? 2 : 0);
+# endif
+
+ if (zf == NULL)
+ {
+ printf("error opening %s\n",filename_try);
+ err= ZIP_ERRNO;
+ }
+ else
+ printf("creating %s\n",filename_try);
+
+ for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+ {
+ if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+ ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+ (argv[i][1]=='a') || (argv[i][1]=='A') ||
+ (argv[i][1]=='p') || (argv[i][1]=='P') ||
+ ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+ (strlen(argv[i]) == 2)))
+ {
+ FILE * fin;
+ int size_read;
+ const char* filenameinzip = argv[i];
+ zip_fileinfo zi;
+ unsigned long crcFile=0;
+
+ zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
+ zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
+ zi.dosDate = 0;
+ zi.internal_fa = 0;
+ zi.external_fa = 0;
+ filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+/*
+ err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+ NULL,0,NULL,0,NULL / * comment * /,
+ (opt_compress_level != 0) ? Z_DEFLATED : 0,
+ opt_compress_level);
+*/
+ if ((password != NULL) && (err==ZIP_OK))
+ err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
+
+ err = zipOpenNewFileInZip3(zf,filenameinzip,&zi,
+ NULL,0,NULL,0,NULL /* comment*/,
+ (opt_compress_level != 0) ? Z_DEFLATED : 0,
+ opt_compress_level,0,
+ /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ password,crcFile);
+
+ if (err != ZIP_OK)
+ printf("error in opening %s in zipfile\n",filenameinzip);
+ else
+ {
+ fin = fopen(filenameinzip,"rb");
+ if (fin==NULL)
+ {
+ err=ZIP_ERRNO;
+ printf("error in opening %s for reading\n",filenameinzip);
+ }
+ }
+
+ if (err == ZIP_OK)
+ do
+ {
+ err = ZIP_OK;
+ size_read = (int)fread(buf,1,size_buf,fin);
+ if (size_read < size_buf)
+ if (feof(fin)==0)
+ {
+ printf("error in reading %s\n",filenameinzip);
+ err = ZIP_ERRNO;
+ }
+
+ if (size_read>0)
+ {
+ err = zipWriteInFileInZip (zf,buf,size_read);
+ if (err<0)
+ {
+ printf("error in writing %s in the zipfile\n",
+ filenameinzip);
+ }
+
+ }
+ } while ((err == ZIP_OK) && (size_read>0));
+
+ if (fin)
+ fclose(fin);
+
+ if (err<0)
+ err=ZIP_ERRNO;
+ else
+ {
+ err = zipCloseFileInZip(zf);
+ if (err!=ZIP_OK)
+ printf("error in closing %s in the zipfile\n",
+ filenameinzip);
+ }
+ }
+ }
+ errclose = zipClose(zf,NULL);
+ if (errclose != ZIP_OK)
+ printf("error in closing %s\n",filename_try);
+ }
+ else
+ {
+ do_help();
+ }
+
+ free(buf);
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,281 @@
+/*
+ Additional tools for Minizip
+ Code: Xavier Roche '2004
+ License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr) ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+ *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+ WRITE_8((unsigned char*)(buff), n); \
+ WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+ WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+ WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+ int err = Z_OK;
+ FILE* fpZip = fopen(file, "rb");
+ FILE* fpOut = fopen(fileOut, "wb");
+ FILE* fpOutCD = fopen(fileOutTmp, "wb");
+ if (fpZip != NULL && fpOut != NULL) {
+ int entries = 0;
+ uLong totalBytes = 0;
+ char header[30];
+ char filename[256];
+ char extra[1024];
+ int offset = 0;
+ int offsetCD = 0;
+ while ( fread(header, 1, 30, fpZip) == 30 ) {
+ int currentOffset = offset;
+
+ /* File entry */
+ if (READ_32(header) == 0x04034b50) {
+ unsigned int version = READ_16(header + 4);
+ unsigned int gpflag = READ_16(header + 6);
+ unsigned int method = READ_16(header + 8);
+ unsigned int filetime = READ_16(header + 10);
+ unsigned int filedate = READ_16(header + 12);
+ unsigned int crc = READ_32(header + 14); /* crc */
+ unsigned int cpsize = READ_32(header + 18); /* compressed size */
+ unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+ unsigned int fnsize = READ_16(header + 26); /* file name length */
+ unsigned int extsize = READ_16(header + 28); /* extra field length */
+ filename[0] = extra[0] = '\0';
+
+ /* Header */
+ if (fwrite(header, 1, 30, fpOut) == 30) {
+ offset += 30;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+
+ /* Filename */
+ if (fnsize > 0) {
+ if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+ if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+ offset += fnsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ break;
+ }
+
+ /* Extra field */
+ if (extsize > 0) {
+ if (fread(extra, 1, extsize, fpZip) == extsize) {
+ if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+ offset += extsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Data */
+ {
+ int dataSize = cpsize;
+ if (dataSize == 0) {
+ dataSize = uncpsize;
+ }
+ if (dataSize > 0) {
+ char* data = malloc(dataSize);
+ if (data != NULL) {
+ if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+ if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+ offset += dataSize;
+ totalBytes += dataSize;
+ } else {
+ err = Z_ERRNO;
+ }
+ } else {
+ err = Z_ERRNO;
+ }
+ free(data);
+ if (err != Z_OK) {
+ break;
+ }
+ } else {
+ err = Z_MEM_ERROR;
+ break;
+ }
+ }
+ }
+
+ /* Central directory entry */
+ {
+ char header[46];
+ char* comment = "";
+ int comsize = (int) strlen(comment);
+ WRITE_32(header, 0x02014b50);
+ WRITE_16(header + 4, version);
+ WRITE_16(header + 6, version);
+ WRITE_16(header + 8, gpflag);
+ WRITE_16(header + 10, method);
+ WRITE_16(header + 12, filetime);
+ WRITE_16(header + 14, filedate);
+ WRITE_32(header + 16, crc);
+ WRITE_32(header + 20, cpsize);
+ WRITE_32(header + 24, uncpsize);
+ WRITE_16(header + 28, fnsize);
+ WRITE_16(header + 30, extsize);
+ WRITE_16(header + 32, comsize);
+ WRITE_16(header + 34, 0); /* disk # */
+ WRITE_16(header + 36, 0); /* int attrb */
+ WRITE_32(header + 38, 0); /* ext attrb */
+ WRITE_32(header + 42, currentOffset);
+ /* Header */
+ if (fwrite(header, 1, 46, fpOutCD) == 46) {
+ offsetCD += 46;
+
+ /* Filename */
+ if (fnsize > 0) {
+ if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+ offsetCD += fnsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ break;
+ }
+
+ /* Extra field */
+ if (extsize > 0) {
+ if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+ offsetCD += extsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Comment field */
+ if (comsize > 0) {
+ if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+ offsetCD += comsize;
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+
+ } else {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+
+ /* Success */
+ entries++;
+
+ } else {
+ break;
+ }
+ }
+
+ /* Final central directory */
+ {
+ int entriesZip = entries;
+ char header[22];
+ char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+ int comsize = (int) strlen(comment);
+ if (entriesZip > 0xffff) {
+ entriesZip = 0xffff;
+ }
+ WRITE_32(header, 0x06054b50);
+ WRITE_16(header + 4, 0); /* disk # */
+ WRITE_16(header + 6, 0); /* disk # */
+ WRITE_16(header + 8, entriesZip); /* hack */
+ WRITE_16(header + 10, entriesZip); /* hack */
+ WRITE_32(header + 12, offsetCD); /* size of CD */
+ WRITE_32(header + 16, offset); /* offset to CD */
+ WRITE_16(header + 20, comsize); /* comment */
+
+ /* Header */
+ if (fwrite(header, 1, 22, fpOutCD) == 22) {
+
+ /* Comment field */
+ if (comsize > 0) {
+ if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+ err = Z_ERRNO;
+ }
+ }
+
+ } else {
+ err = Z_ERRNO;
+ }
+ }
+
+ /* Final merge (file + central directory) */
+ fclose(fpOutCD);
+ if (err == Z_OK) {
+ fpOutCD = fopen(fileOutTmp, "rb");
+ if (fpOutCD != NULL) {
+ int nRead;
+ char buffer[8192];
+ while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+ if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+ err = Z_ERRNO;
+ break;
+ }
+ }
+ fclose(fpOutCD);
+ }
+ }
+
+ /* Close */
+ fclose(fpZip);
+ fclose(fpOut);
+
+ /* Wipe temporary file */
+ (void)remove(fileOutTmp);
+
+ /* Number of recovered entries */
+ if (err == Z_OK) {
+ if (nRecovered != NULL) {
+ *nRecovered = entries;
+ }
+ if (bytesRecovered != NULL) {
+ *bytesRecovered = totalBytes;
+ }
+ }
+ } else {
+ err = Z_STREAM_ERROR;
+ }
+ return err;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.h (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/mztools.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,31 @@
+/*
+ Additional tools for Minizip
+ Code: Xavier Roche '2004
+ License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory)
+ file: file to recover
+ fileOut: output file after recovery
+ fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file,
+ const char* fileOut,
+ const char* fileOutTmp,
+ uLong* nRecovered,
+ uLong* bytesRecovered);
+
+#endif
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1598 @@
+/* unzip.c -- IO for uncompress .zip files using zlib
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ Read unzip.h for more info
+*/
+
+/* Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of
+compatibility with older software. The following is from the original crypt.c. Code
+woven in by Terry Thorsen 1/2003.
+*/
+/*
+ Copyright (c) 1990-2000 Info-ZIP. All rights reserved.
+
+ See the accompanying file LICENSE, version 2000-Apr-09 or later
+ (the contents of which are also included in zip.h) for terms of use.
+ If, for some reason, all these files are missing, the Info-ZIP license
+ also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html
+*/
+/*
+ crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h]
+
+ The encryption/decryption parts of this source code (as opposed to the
+ non-echoing password parts) were originally written in Europe. The
+ whole source package can be freely distributed, including from the USA.
+ (Prior to January 2000, re-export from the US was a violation of US law.)
+ */
+
+/*
+ This encryption code is a direct transcription of the algorithm from
+ Roger Schlafly, described by Phil Katz in the file appnote.txt. This
+ file (appnote.txt) is distributed with the PKZIP program (even in the
+ version without encryption capabilities).
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#ifdef STDC
+# include <stddef.h>
+# include <string.h>
+# include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+ extern int errno;
+#else
+# include <errno.h>
+#endif
+
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+
+#ifndef CASESENSITIVITYDEFAULT_NO
+# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES)
+# define CASESENSITIVITYDEFAULT_NO
+# endif
+#endif
+
+
+#ifndef UNZ_BUFSIZE
+#define UNZ_BUFSIZE (16384)
+#endif
+
+#ifndef UNZ_MAXFILENAMEINZIP
+#define UNZ_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+
+
+
+
+const char unz_copyright[] =
+ " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
+
+/* unz_file_info_interntal contain internal info about a file in zipfile*/
+typedef struct unz_file_info_internal_s
+{
+ uLong offset_curfile;/* relative offset of local header 4 bytes */
+} unz_file_info_internal;
+
+
+/* file_in_zip_read_info_s contain internal information about a file in zipfile,
+ when reading and decompress it */
+typedef struct
+{
+ char *read_buffer; /* internal buffer for compressed data */
+ z_stream stream; /* zLib stream structure for inflate */
+
+ uLong pos_in_zipfile; /* position in byte on the zipfile, for fseek*/
+ uLong stream_initialised; /* flag set if stream structure is initialised*/
+
+ uLong offset_local_extrafield;/* offset of the local extra field */
+ uInt size_local_extrafield;/* size of the local extra field */
+ uLong pos_local_extrafield; /* position in the local extra field in read*/
+
+ uLong crc32; /* crc32 of all data uncompressed */
+ uLong crc32_wait; /* crc32 we must obtain after decompress all */
+ uLong rest_read_compressed; /* number of byte to be decompressed */
+ uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/
+ zlib_filefunc_def z_filefunc;
+ voidpf filestream; /* io structore of the zipfile */
+ uLong compression_method; /* compression method (0==store) */
+ uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+ int raw;
+} file_in_zip_read_info_s;
+
+
+/* unz_s contain internal information about the zipfile
+*/
+typedef struct
+{
+ zlib_filefunc_def z_filefunc;
+ voidpf filestream; /* io structore of the zipfile */
+ unz_global_info gi; /* public global information */
+ uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+ uLong num_file; /* number of the current file in the zipfile*/
+ uLong pos_in_central_dir; /* pos of the current file in the central dir*/
+ uLong current_file_ok; /* flag about the usability of the current file*/
+ uLong central_pos; /* position of the beginning of the central dir*/
+
+ uLong size_central_dir; /* size of the central directory */
+ uLong offset_central_dir; /* offset of start of central directory with
+ respect to the starting disk number */
+
+ unz_file_info cur_file_info; /* public info about the current file in zip*/
+ unz_file_info_internal cur_file_info_internal; /* private info about it*/
+ file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current
+ file if we are decompressing it */
+ int encrypted;
+# ifndef NOUNCRYPT
+ unsigned long keys[3]; /* keys defining the pseudo-random sequence */
+ const unsigned long* pcrc_32_tab;
+# endif
+} unz_s;
+
+
+#ifndef NOUNCRYPT
+#include "crypt.h"
+#endif
+
+/* ===========================================================================
+ Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+ for end of file.
+ IN assertion: the stream s has been sucessfully opened for reading.
+*/
+
+
+local int unzlocal_getByte OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ int *pi));
+
+local int unzlocal_getByte(pzlib_filefunc_def,filestream,pi)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ int *pi;
+{
+ unsigned char c;
+ int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1);
+ if (err==1)
+ {
+ *pi = (int)c;
+ return UNZ_OK;
+ }
+ else
+ {
+ if (ZERROR(*pzlib_filefunc_def,filestream))
+ return UNZ_ERRNO;
+ else
+ return UNZ_EOF;
+ }
+}
+
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets
+*/
+local int unzlocal_getShort OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int unzlocal_getShort (pzlib_filefunc_def,filestream,pX)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ uLong *pX;
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int unzlocal_getLong OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int unzlocal_getLong (pzlib_filefunc_def,filestream,pX)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ uLong *pX;
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<16;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<24;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+
+/* My own strcmpi / strcasecmp */
+local int strcmpcasenosensitive_internal (fileName1,fileName2)
+ const char* fileName1;
+ const char* fileName2;
+{
+ for (;;)
+ {
+ char c1=*(fileName1++);
+ char c2=*(fileName2++);
+ if ((c1>='a') && (c1<='z'))
+ c1 -= 0x20;
+ if ((c2>='a') && (c2<='z'))
+ c2 -= 0x20;
+ if (c1=='\0')
+ return ((c2=='\0') ? 0 : -1);
+ if (c2=='\0')
+ return 1;
+ if (c1<c2)
+ return -1;
+ if (c1>c2)
+ return 1;
+ }
+}
+
+
+#ifdef CASESENSITIVITYDEFAULT_NO
+#define CASESENSITIVITYDEFAULTVALUE 2
+#else
+#define CASESENSITIVITYDEFAULTVALUE 1
+#endif
+
+#ifndef STRCMPCASENOSENTIVEFUNCTION
+#define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal
+#endif
+
+/*
+ Compare two filename (fileName1,fileName2).
+ If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+ If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+ or strcasecmp)
+ If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+ (like 1 on Unix, 2 on Windows)
+
+*/
+extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity)
+ const char* fileName1;
+ const char* fileName2;
+ int iCaseSensitivity;
+{
+ if (iCaseSensitivity==0)
+ iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE;
+
+ if (iCaseSensitivity==1)
+ return strcmp(fileName1,fileName2);
+
+ return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2);
+}
+
+#ifndef BUFREADCOMMENT
+#define BUFREADCOMMENT (0x400)
+#endif
+
+/*
+ Locate the Central directory of a zipfile (at the end, just before
+ the global comment)
+*/
+local uLong unzlocal_SearchCentralDir OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream));
+
+local uLong unzlocal_SearchCentralDir(pzlib_filefunc_def,filestream)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+{
+ unsigned char* buf;
+ uLong uSizeFile;
+ uLong uBackRead;
+ uLong uMaxBack=0xffff; /* maximum size of global comment */
+ uLong uPosFound=0;
+
+ if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+
+ uSizeFile = ZTELL(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize,uReadPos ;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
+ if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
+ ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+ TRYFREE(buf);
+ return uPosFound;
+}
+
+/*
+ Open a Zip file. path contain the full pathname (by example,
+ on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer
+ "zlib/zlib114.zip".
+ If the zipfile cannot be opened (file doesn't exist or in not valid), the
+ return value is NULL.
+ Else, the return value is a unzFile Handle, usable with other function
+ of this unzip package.
+*/
+extern unzFile ZEXPORT unzOpen2 (path, pzlib_filefunc_def)
+ const char *path;
+ zlib_filefunc_def* pzlib_filefunc_def;
+{
+ unz_s us;
+ unz_s *s;
+ uLong central_pos,uL;
+
+ uLong number_disk; /* number of the current dist, used for
+ spaning ZIP, unsupported, always 0*/
+ uLong number_disk_with_CD; /* number the the disk with central dir, used
+ for spaning ZIP, unsupported, always 0*/
+ uLong number_entry_CD; /* total number of entries in
+ the central dir
+ (same than number_entry on nospan) */
+
+ int err=UNZ_OK;
+
+ if (unz_copyright[0]!=' ')
+ return NULL;
+
+ if (pzlib_filefunc_def==NULL)
+ fill_fopen_filefunc(&us.z_filefunc);
+ else
+ us.z_filefunc = *pzlib_filefunc_def;
+
+ us.filestream= (*(us.z_filefunc.zopen_file))(us.z_filefunc.opaque,
+ path,
+ ZLIB_FILEFUNC_MODE_READ |
+ ZLIB_FILEFUNC_MODE_EXISTING);
+ if (us.filestream==NULL)
+ return NULL;
+
+ central_pos = unzlocal_SearchCentralDir(&us.z_filefunc,us.filestream);
+ if (central_pos==0)
+ err=UNZ_ERRNO;
+
+ if (ZSEEK(us.z_filefunc, us.filestream,
+ central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+ /* the signature, already checked */
+ if (unzlocal_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of this disk */
+ if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* total number of entries in the central dir on this disk */
+ if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* total number of entries in the central dir */
+ if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if ((number_entry_CD!=us.gi.number_entry) ||
+ (number_disk_with_CD!=0) ||
+ (number_disk!=0))
+ err=UNZ_BADZIPFILE;
+
+ /* size of the central directory */
+ if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* offset of start of central directory with respect to the
+ starting disk number */
+ if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ /* zipfile comment length */
+ if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if ((central_pos<us.offset_central_dir+us.size_central_dir) &&
+ (err==UNZ_OK))
+ err=UNZ_BADZIPFILE;
+
+ if (err!=UNZ_OK)
+ {
+ ZCLOSE(us.z_filefunc, us.filestream);
+ return NULL;
+ }
+
+ us.byte_before_the_zipfile = central_pos -
+ (us.offset_central_dir+us.size_central_dir);
+ us.central_pos = central_pos;
+ us.pfile_in_zip_read = NULL;
+ us.encrypted = 0;
+
+
+ s=(unz_s*)ALLOC(sizeof(unz_s));
+ *s=us;
+ unzGoToFirstFile((unzFile)s);
+ return (unzFile)s;
+}
+
+
+extern unzFile ZEXPORT unzOpen (path)
+ const char *path;
+{
+ return unzOpen2(path, NULL);
+}
+
+/*
+ Close a ZipFile opened with unzipOpen.
+ If there is files inside the .Zip opened with unzipOpenCurrentFile (see later),
+ these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+ return UNZ_OK if there is no problem. */
+extern int ZEXPORT unzClose (file)
+ unzFile file;
+{
+ unz_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+
+ if (s->pfile_in_zip_read!=NULL)
+ unzCloseCurrentFile(file);
+
+ ZCLOSE(s->z_filefunc, s->filestream);
+ TRYFREE(s);
+ return UNZ_OK;
+}
+
+
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem. */
+extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info)
+ unzFile file;
+ unz_global_info *pglobal_info;
+{
+ unz_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ *pglobal_info=s->gi;
+ return UNZ_OK;
+}
+
+
+/*
+ Translate date/time from Dos format to tm_unz (readable more easilty)
+*/
+local void unzlocal_DosDateToTmuDate (ulDosDate, ptm)
+ uLong ulDosDate;
+ tm_unz* ptm;
+{
+ uLong uDate;
+ uDate = (uLong)(ulDosDate>>16);
+ ptm->tm_mday = (uInt)(uDate&0x1f) ;
+ ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ;
+ ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;
+
+ ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);
+ ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ;
+ ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ;
+}
+
+/*
+ Get Info about the current file in the zipfile, with internal only info
+*/
+local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file,
+ unz_file_info *pfile_info,
+ unz_file_info_internal
+ *pfile_info_internal,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+
+local int unzlocal_GetCurrentFileInfoInternal (file,
+ pfile_info,
+ pfile_info_internal,
+ szFileName, fileNameBufferSize,
+ extraField, extraFieldBufferSize,
+ szComment, commentBufferSize)
+ unzFile file;
+ unz_file_info *pfile_info;
+ unz_file_info_internal *pfile_info_internal;
+ char *szFileName;
+ uLong fileNameBufferSize;
+ void *extraField;
+ uLong extraFieldBufferSize;
+ char *szComment;
+ uLong commentBufferSize;
+{
+ unz_s* s;
+ unz_file_info file_info;
+ unz_file_info_internal file_info_internal;
+ int err=UNZ_OK;
+ uLong uMagic;
+ long lSeek=0;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (ZSEEK(s->z_filefunc, s->filestream,
+ s->pos_in_central_dir+s->byte_before_the_zipfile,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+
+ /* we check the magic */
+ if (err==UNZ_OK)
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x02014b50)
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ lSeek+=file_info.size_filename;
+ if ((err==UNZ_OK) && (szFileName!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_filename<fileNameBufferSize)
+ {
+ *(szFileName+file_info.size_filename)='\0';
+ uSizeRead = file_info.size_filename;
+ }
+ else
+ uSizeRead = fileNameBufferSize;
+
+ if ((file_info.size_filename>0) && (fileNameBufferSize>0))
+ if (ZREAD(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+ lSeek -= uSizeRead;
+ }
+
+
+ if ((err==UNZ_OK) && (extraField!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_file_extra<extraFieldBufferSize)
+ uSizeRead = file_info.size_file_extra;
+ else
+ uSizeRead = extraFieldBufferSize;
+
+ if (lSeek!=0)
+ if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
+ if (ZREAD(s->z_filefunc, s->filestream,extraField,uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+ lSeek += file_info.size_file_extra - uSizeRead;
+ }
+ else
+ lSeek+=file_info.size_file_extra;
+
+
+ if ((err==UNZ_OK) && (szComment!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_file_comment<commentBufferSize)
+ {
+ *(szComment+file_info.size_file_comment)='\0';
+ uSizeRead = file_info.size_file_comment;
+ }
+ else
+ uSizeRead = commentBufferSize;
+
+ if (lSeek!=0)
+ if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ if ((file_info.size_file_comment>0) && (commentBufferSize>0))
+ if (ZREAD(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead)
+ err=UNZ_ERRNO;
+ lSeek+=file_info.size_file_comment - uSizeRead;
+ }
+ else
+ lSeek+=file_info.size_file_comment;
+
+ if ((err==UNZ_OK) && (pfile_info!=NULL))
+ *pfile_info=file_info;
+
+ if ((err==UNZ_OK) && (pfile_info_internal!=NULL))
+ *pfile_info_internal=file_info_internal;
+
+ return err;
+}
+
+
+
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem.
+*/
+extern int ZEXPORT unzGetCurrentFileInfo (file,
+ pfile_info,
+ szFileName, fileNameBufferSize,
+ extraField, extraFieldBufferSize,
+ szComment, commentBufferSize)
+ unzFile file;
+ unz_file_info *pfile_info;
+ char *szFileName;
+ uLong fileNameBufferSize;
+ void *extraField;
+ uLong extraFieldBufferSize;
+ char *szComment;
+ uLong commentBufferSize;
+{
+ return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,
+ szFileName,fileNameBufferSize,
+ extraField,extraFieldBufferSize,
+ szComment,commentBufferSize);
+}
+
+/*
+ Set the current file of the zipfile to the first file.
+ return UNZ_OK if there is no problem
+*/
+extern int ZEXPORT unzGoToFirstFile (file)
+ unzFile file;
+{
+ int err=UNZ_OK;
+ unz_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ s->pos_in_central_dir=s->offset_central_dir;
+ s->num_file=0;
+ err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+/*
+ Set the current file of the zipfile to the next file.
+ return UNZ_OK if there is no problem
+ return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+extern int ZEXPORT unzGoToNextFile (file)
+ unzFile file;
+{
+ unz_s* s;
+ int err;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+ if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */
+ if (s->num_file+1==s->gi.number_entry)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
+ s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;
+ s->num_file++;
+ err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+
+/*
+ Try locate the file szFileName in the zipfile.
+ For the iCaseSensitivity signification, see unzipStringFileNameCompare
+
+ return value :
+ UNZ_OK if the file is found. It becomes the current file.
+ UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity)
+ unzFile file;
+ const char *szFileName;
+ int iCaseSensitivity;
+{
+ unz_s* s;
+ int err;
+
+ /* We remember the 'current' position in the file so that we can jump
+ * back there if we fail.
+ */
+ unz_file_info cur_file_infoSaved;
+ unz_file_info_internal cur_file_info_internalSaved;
+ uLong num_fileSaved;
+ uLong pos_in_central_dirSaved;
+
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+
+ if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP)
+ return UNZ_PARAMERROR;
+
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ /* Save the current state */
+ num_fileSaved = s->num_file;
+ pos_in_central_dirSaved = s->pos_in_central_dir;
+ cur_file_infoSaved = s->cur_file_info;
+ cur_file_info_internalSaved = s->cur_file_info_internal;
+
+ err = unzGoToFirstFile(file);
+
+ while (err == UNZ_OK)
+ {
+ char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];
+ err = unzGetCurrentFileInfo(file,NULL,
+ szCurrentFileName,sizeof(szCurrentFileName)-1,
+ NULL,0,NULL,0);
+ if (err == UNZ_OK)
+ {
+ if (unzStringFileNameCompare(szCurrentFileName,
+ szFileName,iCaseSensitivity)==0)
+ return UNZ_OK;
+ err = unzGoToNextFile(file);
+ }
+ }
+
+ /* We failed, so restore the state of the 'current file' to where we
+ * were.
+ */
+ s->num_file = num_fileSaved ;
+ s->pos_in_central_dir = pos_in_central_dirSaved ;
+ s->cur_file_info = cur_file_infoSaved;
+ s->cur_file_info_internal = cur_file_info_internalSaved;
+ return err;
+}
+
+
+/*
+///////////////////////////////////////////
+// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net)
+// I need random access
+//
+// Further optimization could be realized by adding an ability
+// to cache the directory in memory. The goal being a single
+// comprehensive file read to put the file I need in a memory.
+*/
+
+/*
+typedef struct unz_file_pos_s
+{
+ uLong pos_in_zip_directory; // offset in file
+ uLong num_of_file; // # of file
+} unz_file_pos;
+*/
+
+extern int ZEXPORT unzGetFilePos(file, file_pos)
+ unzFile file;
+ unz_file_pos* file_pos;
+{
+ unz_s* s;
+
+ if (file==NULL || file_pos==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ file_pos->pos_in_zip_directory = s->pos_in_central_dir;
+ file_pos->num_of_file = s->num_file;
+
+ return UNZ_OK;
+}
+
+extern int ZEXPORT unzGoToFilePos(file, file_pos)
+ unzFile file;
+ unz_file_pos* file_pos;
+{
+ unz_s* s;
+ int err;
+
+ if (file==NULL || file_pos==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+
+ /* jump to the right spot */
+ s->pos_in_central_dir = file_pos->pos_in_zip_directory;
+ s->num_file = file_pos->num_of_file;
+
+ /* set the current file */
+ err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ /* return results */
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+/*
+// Unzip Helper Functions - should be here?
+///////////////////////////////////////////
+*/
+
+/*
+ Read the local header of the current zipfile
+ Check the coherency of the local header and info in the end of central
+ directory about this file
+ store in *piSizeVar the size of extra info in local header
+ (filename and size of extra field data)
+*/
+local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar,
+ poffset_local_extrafield,
+ psize_local_extrafield)
+ unz_s* s;
+ uInt* piSizeVar;
+ uLong *poffset_local_extrafield;
+ uInt *psize_local_extrafield;
+{
+ uLong uMagic,uData,uFlags;
+ uLong size_filename;
+ uLong size_extra_field;
+ int err=UNZ_OK;
+
+ *piSizeVar = 0;
+ *poffset_local_extrafield = 0;
+ *psize_local_extrafield = 0;
+
+ if (ZSEEK(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile +
+ s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+
+ if (err==UNZ_OK)
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x04034b50)
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+/*
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))
+ err=UNZ_BADZIPFILE;
+*/
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))
+ err=UNZ_BADZIPFILE;
+
+ if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&
+ (s->cur_file_info.compression_method!=Z_DEFLATED))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))
+ err=UNZ_BADZIPFILE;
+
+ *piSizeVar += (uInt)size_filename;
+
+ if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK)
+ err=UNZ_ERRNO;
+ *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +
+ SIZEZIPLOCALHEADER + size_filename;
+ *psize_local_extrafield = (uInt)size_extra_field;
+
+ *piSizeVar += (uInt)size_extra_field;
+
+ return err;
+}
+
+/*
+ Open for reading data the current file in the zipfile.
+ If there is no error and the file is opened, the return value is UNZ_OK.
+*/
+extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password)
+ unzFile file;
+ int* method;
+ int* level;
+ int raw;
+ const char* password;
+{
+ int err=UNZ_OK;
+ uInt iSizeVar;
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ uLong offset_local_extrafield; /* offset of the local extra field */
+ uInt size_local_extrafield; /* size of the local extra field */
+# ifndef NOUNCRYPT
+ char source[12];
+# else
+ if (password != NULL)
+ return UNZ_PARAMERROR;
+# endif
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_PARAMERROR;
+
+ if (s->pfile_in_zip_read != NULL)
+ unzCloseCurrentFile(file);
+
+ if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar,
+ &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)
+ return UNZ_BADZIPFILE;
+
+ pfile_in_zip_read_info = (file_in_zip_read_info_s*)
+ ALLOC(sizeof(file_in_zip_read_info_s));
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_INTERNALERROR;
+
+ pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE);
+ pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;
+ pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;
+ pfile_in_zip_read_info->pos_local_extrafield=0;
+ pfile_in_zip_read_info->raw=raw;
+
+ if (pfile_in_zip_read_info->read_buffer==NULL)
+ {
+ TRYFREE(pfile_in_zip_read_info);
+ return UNZ_INTERNALERROR;
+ }
+
+ pfile_in_zip_read_info->stream_initialised=0;
+
+ if (method!=NULL)
+ *method = (int)s->cur_file_info.compression_method;
+
+ if (level!=NULL)
+ {
+ *level = 6;
+ switch (s->cur_file_info.flag & 0x06)
+ {
+ case 6 : *level = 1; break;
+ case 4 : *level = 2; break;
+ case 2 : *level = 9; break;
+ }
+ }
+
+ if ((s->cur_file_info.compression_method!=0) &&
+ (s->cur_file_info.compression_method!=Z_DEFLATED))
+ err=UNZ_BADZIPFILE;
+
+ pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;
+ pfile_in_zip_read_info->crc32=0;
+ pfile_in_zip_read_info->compression_method =
+ s->cur_file_info.compression_method;
+ pfile_in_zip_read_info->filestream=s->filestream;
+ pfile_in_zip_read_info->z_filefunc=s->z_filefunc;
+ pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;
+
+ pfile_in_zip_read_info->stream.total_out = 0;
+
+ if ((s->cur_file_info.compression_method==Z_DEFLATED) &&
+ (!raw))
+ {
+ pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
+ pfile_in_zip_read_info->stream.zfree = (free_func)0;
+ pfile_in_zip_read_info->stream.opaque = (voidpf)0;
+ pfile_in_zip_read_info->stream.next_in = (voidpf)0;
+ pfile_in_zip_read_info->stream.avail_in = 0;
+
+ err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS);
+ if (err == Z_OK)
+ pfile_in_zip_read_info->stream_initialised=1;
+ else
+ {
+ TRYFREE(pfile_in_zip_read_info);
+ return err;
+ }
+ /* windowBits is passed < 0 to tell that there is no zlib header.
+ * Note that in this case inflate *requires* an extra "dummy" byte
+ * after the compressed stream in order to complete decompression and
+ * return Z_STREAM_END.
+ * In unzip, i don't wait absolutely Z_STREAM_END because I known the
+ * size of both compressed and uncompressed data
+ */
+ }
+ pfile_in_zip_read_info->rest_read_compressed =
+ s->cur_file_info.compressed_size ;
+ pfile_in_zip_read_info->rest_read_uncompressed =
+ s->cur_file_info.uncompressed_size ;
+
+
+ pfile_in_zip_read_info->pos_in_zipfile =
+ s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER +
+ iSizeVar;
+
+ pfile_in_zip_read_info->stream.avail_in = (uInt)0;
+
+ s->pfile_in_zip_read = pfile_in_zip_read_info;
+
+# ifndef NOUNCRYPT
+ if (password != NULL)
+ {
+ int i;
+ s->pcrc_32_tab = get_crc_table();
+ init_keys(password,s->keys,s->pcrc_32_tab);
+ if (ZSEEK(s->z_filefunc, s->filestream,
+ s->pfile_in_zip_read->pos_in_zipfile +
+ s->pfile_in_zip_read->byte_before_the_zipfile,
+ SEEK_SET)!=0)
+ return UNZ_INTERNALERROR;
+ if(ZREAD(s->z_filefunc, s->filestream,source, 12)<12)
+ return UNZ_INTERNALERROR;
+
+ for (i = 0; i<12; i++)
+ zdecode(s->keys,s->pcrc_32_tab,source[i]);
+
+ s->pfile_in_zip_read->pos_in_zipfile+=12;
+ s->encrypted=1;
+ }
+# endif
+
+
+ return UNZ_OK;
+}
+
+extern int ZEXPORT unzOpenCurrentFile (file)
+ unzFile file;
+{
+ return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL);
+}
+
+extern int ZEXPORT unzOpenCurrentFilePassword (file, password)
+ unzFile file;
+ const char* password;
+{
+ return unzOpenCurrentFile3(file, NULL, NULL, 0, password);
+}
+
+extern int ZEXPORT unzOpenCurrentFile2 (file,method,level,raw)
+ unzFile file;
+ int* method;
+ int* level;
+ int raw;
+{
+ return unzOpenCurrentFile3(file, method, level, raw, NULL);
+}
+
+/*
+ Read bytes from the current file.
+ buf contain buffer where data must be copied
+ len the size of buf.
+
+ return the number of byte copied if somes bytes are copied
+ return 0 if the end of file was reached
+ return <0 with error code if there is an error
+ (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+extern int ZEXPORT unzReadCurrentFile (file, buf, len)
+ unzFile file;
+ voidp buf;
+ unsigned len;
+{
+ int err=UNZ_OK;
+ uInt iRead = 0;
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+
+ if ((pfile_in_zip_read_info->read_buffer == NULL))
+ return UNZ_END_OF_LIST_OF_FILE;
+ if (len==0)
+ return 0;
+
+ pfile_in_zip_read_info->stream.next_out = (Bytef*)buf;
+
+ pfile_in_zip_read_info->stream.avail_out = (uInt)len;
+
+ if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
+ (!(pfile_in_zip_read_info->raw)))
+ pfile_in_zip_read_info->stream.avail_out =
+ (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
+
+ if ((len>pfile_in_zip_read_info->rest_read_compressed+
+ pfile_in_zip_read_info->stream.avail_in) &&
+ (pfile_in_zip_read_info->raw))
+ pfile_in_zip_read_info->stream.avail_out =
+ (uInt)pfile_in_zip_read_info->rest_read_compressed+
+ pfile_in_zip_read_info->stream.avail_in;
+
+ while (pfile_in_zip_read_info->stream.avail_out>0)
+ {
+ if ((pfile_in_zip_read_info->stream.avail_in==0) &&
+ (pfile_in_zip_read_info->rest_read_compressed>0))
+ {
+ uInt uReadThis = UNZ_BUFSIZE;
+ if (pfile_in_zip_read_info->rest_read_compressed<uReadThis)
+ uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;
+ if (uReadThis == 0)
+ return UNZ_EOF;
+ if (ZSEEK(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->pos_in_zipfile +
+ pfile_in_zip_read_info->byte_before_the_zipfile,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+ if (ZREAD(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->read_buffer,
+ uReadThis)!=uReadThis)
+ return UNZ_ERRNO;
+
+
+# ifndef NOUNCRYPT
+ if(s->encrypted)
+ {
+ uInt i;
+ for(i=0;i<uReadThis;i++)
+ pfile_in_zip_read_info->read_buffer[i] =
+ zdecode(s->keys,s->pcrc_32_tab,
+ pfile_in_zip_read_info->read_buffer[i]);
+ }
+# endif
+
+
+ pfile_in_zip_read_info->pos_in_zipfile += uReadThis;
+
+ pfile_in_zip_read_info->rest_read_compressed-=uReadThis;
+
+ pfile_in_zip_read_info->stream.next_in =
+ (Bytef*)pfile_in_zip_read_info->read_buffer;
+ pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;
+ }
+
+ if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw))
+ {
+ uInt uDoCopy,i ;
+
+ if ((pfile_in_zip_read_info->stream.avail_in == 0) &&
+ (pfile_in_zip_read_info->rest_read_compressed == 0))
+ return (iRead==0) ? UNZ_EOF : iRead;
+
+ if (pfile_in_zip_read_info->stream.avail_out <
+ pfile_in_zip_read_info->stream.avail_in)
+ uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
+ else
+ uDoCopy = pfile_in_zip_read_info->stream.avail_in ;
+
+ for (i=0;i<uDoCopy;i++)
+ *(pfile_in_zip_read_info->stream.next_out+i) =
+ *(pfile_in_zip_read_info->stream.next_in+i);
+
+ pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32,
+ pfile_in_zip_read_info->stream.next_out,
+ uDoCopy);
+ pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;
+ pfile_in_zip_read_info->stream.avail_in -= uDoCopy;
+ pfile_in_zip_read_info->stream.avail_out -= uDoCopy;
+ pfile_in_zip_read_info->stream.next_out += uDoCopy;
+ pfile_in_zip_read_info->stream.next_in += uDoCopy;
+ pfile_in_zip_read_info->stream.total_out += uDoCopy;
+ iRead += uDoCopy;
+ }
+ else
+ {
+ uLong uTotalOutBefore,uTotalOutAfter;
+ const Bytef *bufBefore;
+ uLong uOutThis;
+ int flush=Z_SYNC_FLUSH;
+
+ uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;
+ bufBefore = pfile_in_zip_read_info->stream.next_out;
+
+ /*
+ if ((pfile_in_zip_read_info->rest_read_uncompressed ==
+ pfile_in_zip_read_info->stream.avail_out) &&
+ (pfile_in_zip_read_info->rest_read_compressed == 0))
+ flush = Z_FINISH;
+ */
+ err=inflate(&pfile_in_zip_read_info->stream,flush);
+
+ if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
+ err = Z_DATA_ERROR;
+
+ uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
+ uOutThis = uTotalOutAfter-uTotalOutBefore;
+
+ pfile_in_zip_read_info->crc32 =
+ crc32(pfile_in_zip_read_info->crc32,bufBefore,
+ (uInt)(uOutThis));
+
+ pfile_in_zip_read_info->rest_read_uncompressed -=
+ uOutThis;
+
+ iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
+
+ if (err==Z_STREAM_END)
+ return (iRead==0) ? UNZ_EOF : iRead;
+ if (err!=Z_OK)
+ break;
+ }
+ }
+
+ if (err==Z_OK)
+ return iRead;
+ return err;
+}
+
+
+/*
+ Give the current position in uncompressed data
+*/
+extern z_off_t ZEXPORT unztell (file)
+ unzFile file;
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ return (z_off_t)pfile_in_zip_read_info->stream.total_out;
+}
+
+
+/*
+ return 1 if the end of file was reached, 0 elsewhere
+*/
+extern int ZEXPORT unzeof (file)
+ unzFile file;
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
+ return 1;
+ else
+ return 0;
+}
+
+
+
+/*
+ Read extra field from the current file (opened by unzOpenCurrentFile)
+ This is the local-header version of the extra field (sometimes, there is
+ more info in the local-header version than in the central-header)
+
+ if buf==NULL, it return the size of the local extra field that can be read
+
+ if buf!=NULL, len is the size of the buffer, the extra header is copied in
+ buf.
+ the return value is the number of bytes copied in buf, or (if <0)
+ the error code
+*/
+extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
+ unzFile file;
+ voidp buf;
+ unsigned len;
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ uInt read_now;
+ uLong size_to_read;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ size_to_read = (pfile_in_zip_read_info->size_local_extrafield -
+ pfile_in_zip_read_info->pos_local_extrafield);
+
+ if (buf==NULL)
+ return (int)size_to_read;
+
+ if (len>size_to_read)
+ read_now = (uInt)size_to_read;
+ else
+ read_now = (uInt)len ;
+
+ if (read_now==0)
+ return 0;
+
+ if (ZSEEK(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ pfile_in_zip_read_info->offset_local_extrafield +
+ pfile_in_zip_read_info->pos_local_extrafield,
+ ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+ if (ZREAD(pfile_in_zip_read_info->z_filefunc,
+ pfile_in_zip_read_info->filestream,
+ buf,read_now)!=read_now)
+ return UNZ_ERRNO;
+
+ return (int)read_now;
+}
+
+/*
+ Close the file in zip opened with unzipOpenCurrentFile
+ Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+extern int ZEXPORT unzCloseCurrentFile (file)
+ unzFile file;
+{
+ int err=UNZ_OK;
+
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+
+ if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) &&
+ (!pfile_in_zip_read_info->raw))
+ {
+ if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)
+ err=UNZ_CRCERROR;
+ }
+
+
+ TRYFREE(pfile_in_zip_read_info->read_buffer);
+ pfile_in_zip_read_info->read_buffer = NULL;
+ if (pfile_in_zip_read_info->stream_initialised)
+ inflateEnd(&pfile_in_zip_read_info->stream);
+
+ pfile_in_zip_read_info->stream_initialised = 0;
+ TRYFREE(pfile_in_zip_read_info);
+
+ s->pfile_in_zip_read=NULL;
+
+ return err;
+}
+
+
+/*
+ Get the global comment string of the ZipFile, in the szComment buffer.
+ uSizeBuf is the size of the szComment buffer.
+ return the number of byte copied or an error code <0
+*/
+extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
+ unzFile file;
+ char *szComment;
+ uLong uSizeBuf;
+{
+ int err=UNZ_OK;
+ unz_s* s;
+ uLong uReadThis ;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+
+ uReadThis = uSizeBuf;
+ if (uReadThis>s->gi.size_comment)
+ uReadThis = s->gi.size_comment;
+
+ if (ZSEEK(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+ if (uReadThis>0)
+ {
+ *szComment='\0';
+ if (ZREAD(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis)
+ return UNZ_ERRNO;
+ }
+
+ if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment))
+ *(szComment+s->gi.size_comment)='\0';
+ return (int)uReadThis;
+}
+
+/* Additions by RX '2004 */
+extern uLong ZEXPORT unzGetOffset (file)
+ unzFile file;
+{
+ unz_s* s;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return 0;
+ if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
+ if (s->num_file==s->gi.number_entry)
+ return 0;
+ return s->pos_in_central_dir;
+}
+
+extern int ZEXPORT unzSetOffset (file, pos)
+ unzFile file;
+ uLong pos;
+{
+ unz_s* s;
+ int err;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+
+ s->pos_in_central_dir = pos;
+ s->num_file = s->gi.number_entry; /* hack */
+ err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.h (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/unzip.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,354 @@
+/* unzip.h -- IO for uncompress .zip files using zlib
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+ WinZip, InfoZip tools and compatible.
+
+ Multi volume ZipFile (span) are not supported.
+ Encryption compatible with pkzip 2.04g only supported
+ Old compressions used by old PKZip 1.x are not supported
+
+
+ I WAIT FEEDBACK at mail info at winimage.com
+ Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see
+ http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+ http://www.info-zip.org/pub/infozip/doc/
+ PkWare has also a specification at :
+ ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+ from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__;
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO (Z_ERRNO)
+#define UNZ_EOF (0)
+#define UNZ_PARAMERROR (-102)
+#define UNZ_BADZIPFILE (-103)
+#define UNZ_INTERNALERROR (-104)
+#define UNZ_CRCERROR (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s
+{
+ uInt tm_sec; /* seconds after the minute - [0,59] */
+ uInt tm_min; /* minutes after the hour - [0,59] */
+ uInt tm_hour; /* hours since midnight - [0,23] */
+ uInt tm_mday; /* day of the month - [1,31] */
+ uInt tm_mon; /* months since January - [0,11] */
+ uInt tm_year; /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+ These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+ uLong number_entry; /* total number of entries in
+ the central dir on this disk */
+ uLong size_comment; /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+ uLong version; /* version made by 2 bytes */
+ uLong version_needed; /* version needed to extract 2 bytes */
+ uLong flag; /* general purpose bit flag 2 bytes */
+ uLong compression_method; /* compression method 2 bytes */
+ uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
+ uLong crc; /* crc-32 4 bytes */
+ uLong compressed_size; /* compressed size 4 bytes */
+ uLong uncompressed_size; /* uncompressed size 4 bytes */
+ uLong size_filename; /* filename length 2 bytes */
+ uLong size_file_extra; /* extra field length 2 bytes */
+ uLong size_file_comment; /* file comment length 2 bytes */
+
+ uLong disk_num_start; /* disk number start 2 bytes */
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+
+ tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+ const char* fileName2,
+ int iCaseSensitivity));
+/*
+ Compare two filename (fileName1,fileName2).
+ If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+ If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+ or strcasecmp)
+ If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+ (like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+/*
+ Open a Zip file. path contain the full pathname (by example,
+ on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
+ "zlib/zlib113.zip".
+ If the zipfile cannot be opened (file don't exist or in not valid), the
+ return value is NULL.
+ Else, the return value is a unzFile Handle, usable with other function
+ of this unzip package.
+*/
+
+extern unzFile ZEXPORT unzOpen2 OF((const char *path,
+ zlib_filefunc_def* pzlib_filefunc_def));
+/*
+ Open a Zip file, like unzOpen, but provide a set of file low level API
+ for read/write the zip file (see ioapi.h)
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+ Close a ZipFile opened with unzipOpen.
+ If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+ these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+ return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+ unz_global_info *pglobal_info));
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+ char *szComment,
+ uLong uSizeBuf));
+/*
+ Get the global comment string of the ZipFile, in the szComment buffer.
+ uSizeBuf is the size of the szComment buffer.
+ return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the first file.
+ return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the next file.
+ return UNZ_OK if there is no problem
+ return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file,
+ const char *szFileName,
+ int iCaseSensitivity));
+/*
+ Try locate the file szFileName in the zipfile.
+ For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+ return value :
+ UNZ_OK if the file is found. It becomes the current file.
+ UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+/* ****************************************** */
+/* Ryan supplied functions */
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_pos_s
+{
+ uLong pos_in_zip_directory; /* offset in zip file directory */
+ uLong num_of_file; /* # of file */
+} unz_file_pos;
+
+extern int ZEXPORT unzGetFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+/* ****************************************** */
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+ unz_file_info *pfile_info,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+/*
+ Get Info about the current file
+ if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+ the current file
+ if szFileName!=NULL, the filemane string will be copied in szFileName
+ (fileNameBufferSize is the size of the buffer)
+ if extraField!=NULL, the extra field information will be copied in extraField
+ (extraFieldBufferSize is the size of the buffer).
+ This is the Central-header version of the extra field
+ if szComment!=NULL, the comment string of the file will be copied in szComment
+ (commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+ from it, and close it (you can close it before reading all the file)
+ */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+ Open for reading data the current file in the zipfile.
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
+ const char* password));
+/*
+ Open for reading data the current file in the zipfile.
+ password is a crypting password
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw,
+ const char* password));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+ Close the file in zip opened with unzOpenCurrentFile
+ Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read bytes from the current file (opened by unzOpenCurrentFile)
+ buf contain buffer where data must be copied
+ len the size of buf.
+
+ return the number of byte copied if somes bytes are copied
+ return 0 if the end of file was reached
+ return <0 with error code if there is an error
+ (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+ Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+ return 1 if the end of file was reached, 0 elsewhere
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read extra field from the current file (opened by unzOpenCurrentFile)
+ This is the local-header version of the extra field (sometimes, there is
+ more info in the local-header version than in the central-header)
+
+ if buf==NULL, it return the size of the local extra field
+
+ if buf!=NULL, len is the size of the buffer, the extra header is copied in
+ buf.
+ the return value is the number of bytes copied in buf, or (if <0)
+ the error code
+*/
+
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1219 @@
+/* zip.c -- IO on .zip files using zlib
+ Version 1.01e, February 12th, 2005
+
+ 27 Dec 2004 Rolf Kalbermatter
+ Modification to zipOpen2 to support globalComment retrieval.
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ Read zip.h for more info
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include "zlib.h"
+#include "zip.h"
+
+#ifdef STDC
+# include <stddef.h>
+# include <string.h>
+# include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+ extern int errno;
+#else
+# include <errno.h>
+#endif
+
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#ifndef VERSIONMADEBY
+# define VERSIONMADEBY (0x0) /* platform depedent */
+#endif
+
+#ifndef Z_BUFSIZE
+#define Z_BUFSIZE (16384)
+#endif
+
+#ifndef Z_MAXFILENAMEINZIP
+#define Z_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+/*
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+*/
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+#ifndef SEEK_CUR
+#define SEEK_CUR 1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END 2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET 0
+#endif
+
+#ifndef DEF_MEM_LEVEL
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+#endif
+const char zip_copyright[] =
+ " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
+
+
+#define SIZEDATA_INDATABLOCK (4096-(4*4))
+
+#define LOCALHEADERMAGIC (0x04034b50)
+#define CENTRALHEADERMAGIC (0x02014b50)
+#define ENDHEADERMAGIC (0x06054b50)
+
+#define FLAG_LOCALHEADER_OFFSET (0x06)
+#define CRC_LOCALHEADER_OFFSET (0x0e)
+
+#define SIZECENTRALHEADER (0x2e) /* 46 */
+
+typedef struct linkedlist_datablock_internal_s
+{
+ struct linkedlist_datablock_internal_s* next_datablock;
+ uLong avail_in_this_block;
+ uLong filled_in_this_block;
+ uLong unused; /* for future use and alignement */
+ unsigned char data[SIZEDATA_INDATABLOCK];
+} linkedlist_datablock_internal;
+
+typedef struct linkedlist_data_s
+{
+ linkedlist_datablock_internal* first_block;
+ linkedlist_datablock_internal* last_block;
+} linkedlist_data;
+
+
+typedef struct
+{
+ z_stream stream; /* zLib stream structure for inflate */
+ int stream_initialised; /* 1 is stream is initialised */
+ uInt pos_in_buffered_data; /* last written byte in buffered_data */
+
+ uLong pos_local_header; /* offset of the local header of the file
+ currenty writing */
+ char* central_header; /* central header data for the current file */
+ uLong size_centralheader; /* size of the central header for cur file */
+ uLong flag; /* flag of the file currently writing */
+
+ int method; /* compression method of file currenty wr.*/
+ int raw; /* 1 for directly writing raw data */
+ Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
+ uLong dosDate;
+ uLong crc32;
+ int encrypt;
+#ifndef NOCRYPT
+ unsigned long keys[3]; /* keys defining the pseudo-random sequence */
+ const unsigned long* pcrc_32_tab;
+ int crypt_header_size;
+#endif
+} curfile_info;
+
+typedef struct
+{
+ zlib_filefunc_def z_filefunc;
+ voidpf filestream; /* io structore of the zipfile */
+ linkedlist_data central_dir;/* datablock with central dir in construction*/
+ int in_opened_file_inzip; /* 1 if a file in the zip is currently writ.*/
+ curfile_info ci; /* info on the file curretly writing */
+
+ uLong begin_pos; /* position of the beginning of the zipfile */
+ uLong add_position_when_writting_offset;
+ uLong number_entry;
+#ifndef NO_ADDFILEINEXISTINGZIP
+ char *globalcomment;
+#endif
+} zip_internal;
+
+
+
+#ifndef NOCRYPT
+#define INCLUDECRYPTINGCODE_IFCRYPTALLOWED
+#include "crypt.h"
+#endif
+
+local linkedlist_datablock_internal* allocate_new_datablock()
+{
+ linkedlist_datablock_internal* ldi;
+ ldi = (linkedlist_datablock_internal*)
+ ALLOC(sizeof(linkedlist_datablock_internal));
+ if (ldi!=NULL)
+ {
+ ldi->next_datablock = NULL ;
+ ldi->filled_in_this_block = 0 ;
+ ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
+ }
+ return ldi;
+}
+
+local void free_datablock(ldi)
+ linkedlist_datablock_internal* ldi;
+{
+ while (ldi!=NULL)
+ {
+ linkedlist_datablock_internal* ldinext = ldi->next_datablock;
+ TRYFREE(ldi);
+ ldi = ldinext;
+ }
+}
+
+local void init_linkedlist(ll)
+ linkedlist_data* ll;
+{
+ ll->first_block = ll->last_block = NULL;
+}
+
+local void free_linkedlist(ll)
+ linkedlist_data* ll;
+{
+ free_datablock(ll->first_block);
+ ll->first_block = ll->last_block = NULL;
+}
+
+
+local int add_data_in_datablock(ll,buf,len)
+ linkedlist_data* ll;
+ const void* buf;
+ uLong len;
+{
+ linkedlist_datablock_internal* ldi;
+ const unsigned char* from_copy;
+
+ if (ll==NULL)
+ return ZIP_INTERNALERROR;
+
+ if (ll->last_block == NULL)
+ {
+ ll->first_block = ll->last_block = allocate_new_datablock();
+ if (ll->first_block == NULL)
+ return ZIP_INTERNALERROR;
+ }
+
+ ldi = ll->last_block;
+ from_copy = (unsigned char*)buf;
+
+ while (len>0)
+ {
+ uInt copy_this;
+ uInt i;
+ unsigned char* to_copy;
+
+ if (ldi->avail_in_this_block==0)
+ {
+ ldi->next_datablock = allocate_new_datablock();
+ if (ldi->next_datablock == NULL)
+ return ZIP_INTERNALERROR;
+ ldi = ldi->next_datablock ;
+ ll->last_block = ldi;
+ }
+
+ if (ldi->avail_in_this_block < len)
+ copy_this = (uInt)ldi->avail_in_this_block;
+ else
+ copy_this = (uInt)len;
+
+ to_copy = &(ldi->data[ldi->filled_in_this_block]);
+
+ for (i=0;i<copy_this;i++)
+ *(to_copy+i)=*(from_copy+i);
+
+ ldi->filled_in_this_block += copy_this;
+ ldi->avail_in_this_block -= copy_this;
+ from_copy += copy_this ;
+ len -= copy_this;
+ }
+ return ZIP_OK;
+}
+
+
+
+/****************************************************************************/
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+/* ===========================================================================
+ Inputs a long in LSB order to the given file
+ nbByte == 1, 2 or 4 (byte, short or long)
+*/
+
+local int ziplocal_putValue OF((const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream, uLong x, int nbByte));
+local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ uLong x;
+ int nbByte;
+{
+ unsigned char buf[4];
+ int n;
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = (unsigned char)(x & 0xff);
+ x >>= 8;
+ }
+ if (x != 0)
+ { /* data overflow - hack for ZIP64 (X Roche) */
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = 0xff;
+ }
+ }
+
+ if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
+ return ZIP_ERRNO;
+ else
+ return ZIP_OK;
+}
+
+local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
+local void ziplocal_putValue_inmemory (dest, x, nbByte)
+ void* dest;
+ uLong x;
+ int nbByte;
+{
+ unsigned char* buf=(unsigned char*)dest;
+ int n;
+ for (n = 0; n < nbByte; n++) {
+ buf[n] = (unsigned char)(x & 0xff);
+ x >>= 8;
+ }
+
+ if (x != 0)
+ { /* data overflow - hack for ZIP64 */
+ for (n = 0; n < nbByte; n++)
+ {
+ buf[n] = 0xff;
+ }
+ }
+}
+
+/****************************************************************************/
+
+
+local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
+ const tm_zip* ptm;
+ uLong dosDate;
+{
+ uLong year = (uLong)ptm->tm_year;
+ if (year>1980)
+ year-=1980;
+ else if (year>80)
+ year-=80;
+ return
+ (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
+ ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
+}
+
+
+/****************************************************************************/
+
+local int ziplocal_getByte OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ int *pi));
+
+local int ziplocal_getByte(pzlib_filefunc_def,filestream,pi)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ int *pi;
+{
+ unsigned char c;
+ int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1);
+ if (err==1)
+ {
+ *pi = (int)c;
+ return ZIP_OK;
+ }
+ else
+ {
+ if (ZERROR(*pzlib_filefunc_def,filestream))
+ return ZIP_ERRNO;
+ else
+ return ZIP_EOF;
+ }
+}
+
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets
+*/
+local int ziplocal_getShort OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int ziplocal_getShort (pzlib_filefunc_def,filestream,pX)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ uLong *pX;
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==ZIP_OK)
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==ZIP_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+local int ziplocal_getLong OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream,
+ uLong *pX));
+
+local int ziplocal_getLong (pzlib_filefunc_def,filestream,pX)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+ uLong *pX;
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x = (uLong)i;
+
+ if (err==ZIP_OK)
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==ZIP_OK)
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<16;
+
+ if (err==ZIP_OK)
+ err = ziplocal_getByte(pzlib_filefunc_def,filestream,&i);
+ x += ((uLong)i)<<24;
+
+ if (err==ZIP_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+#ifndef BUFREADCOMMENT
+#define BUFREADCOMMENT (0x400)
+#endif
+/*
+ Locate the Central directory of a zipfile (at the end, just before
+ the global comment)
+*/
+local uLong ziplocal_SearchCentralDir OF((
+ const zlib_filefunc_def* pzlib_filefunc_def,
+ voidpf filestream));
+
+local uLong ziplocal_SearchCentralDir(pzlib_filefunc_def,filestream)
+ const zlib_filefunc_def* pzlib_filefunc_def;
+ voidpf filestream;
+{
+ unsigned char* buf;
+ uLong uSizeFile;
+ uLong uBackRead;
+ uLong uMaxBack=0xffff; /* maximum size of global comment */
+ uLong uPosFound=0;
+
+ if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0)
+ return 0;
+
+
+ uSizeFile = ZTELL(*pzlib_filefunc_def,filestream);
+
+ if (uMaxBack>uSizeFile)
+ uMaxBack = uSizeFile;
+
+ buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4);
+ if (buf==NULL)
+ return 0;
+
+ uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ {
+ uLong uReadSize,uReadPos ;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack)
+ uBackRead = uMaxBack;
+ else
+ uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ?
+ (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
+ if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ break;
+
+ if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize)
+ break;
+
+ for (i=(int)uReadSize-3; (i--)>0;)
+ if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) &&
+ ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
+ {
+ uPosFound = uReadPos+i;
+ break;
+ }
+
+ if (uPosFound!=0)
+ break;
+ }
+ TRYFREE(buf);
+ return uPosFound;
+}
+#endif /* !NO_ADDFILEINEXISTINGZIP*/
+
+/************************************************************/
+extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc_def)
+ const char *pathname;
+ int append;
+ zipcharpc* globalcomment;
+ zlib_filefunc_def* pzlib_filefunc_def;
+{
+ zip_internal ziinit;
+ zip_internal* zi;
+ int err=ZIP_OK;
+
+
+ if (pzlib_filefunc_def==NULL)
+ fill_fopen_filefunc(&ziinit.z_filefunc);
+ else
+ ziinit.z_filefunc = *pzlib_filefunc_def;
+
+ ziinit.filestream = (*(ziinit.z_filefunc.zopen_file))
+ (ziinit.z_filefunc.opaque,
+ pathname,
+ (append == APPEND_STATUS_CREATE) ?
+ (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_CREATE) :
+ (ZLIB_FILEFUNC_MODE_READ | ZLIB_FILEFUNC_MODE_WRITE | ZLIB_FILEFUNC_MODE_EXISTING));
+
+ if (ziinit.filestream == NULL)
+ return NULL;
+ ziinit.begin_pos = ZTELL(ziinit.z_filefunc,ziinit.filestream);
+ ziinit.in_opened_file_inzip = 0;
+ ziinit.ci.stream_initialised = 0;
+ ziinit.number_entry = 0;
+ ziinit.add_position_when_writting_offset = 0;
+ init_linkedlist(&(ziinit.central_dir));
+
+
+ zi = (zip_internal*)ALLOC(sizeof(zip_internal));
+ if (zi==NULL)
+ {
+ ZCLOSE(ziinit.z_filefunc,ziinit.filestream);
+ return NULL;
+ }
+
+ /* now we add file in a zipfile */
+# ifndef NO_ADDFILEINEXISTINGZIP
+ ziinit.globalcomment = NULL;
+ if (append == APPEND_STATUS_ADDINZIP)
+ {
+ uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
+
+ uLong size_central_dir; /* size of the central directory */
+ uLong offset_central_dir; /* offset of start of central directory */
+ uLong central_pos,uL;
+
+ uLong number_disk; /* number of the current dist, used for
+ spaning ZIP, unsupported, always 0*/
+ uLong number_disk_with_CD; /* number the the disk with central dir, used
+ for spaning ZIP, unsupported, always 0*/
+ uLong number_entry;
+ uLong number_entry_CD; /* total number of entries in
+ the central dir
+ (same than number_entry on nospan) */
+ uLong size_comment;
+
+ central_pos = ziplocal_SearchCentralDir(&ziinit.z_filefunc,ziinit.filestream);
+ if (central_pos==0)
+ err=ZIP_ERRNO;
+
+ if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
+ central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=ZIP_ERRNO;
+
+ /* the signature, already checked */
+ if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&uL)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of this disk */
+ if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* number of the disk with the start of the central directory */
+ if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_disk_with_CD)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* total number of entries in the central dir on this disk */
+ if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* total number of entries in the central dir */
+ if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&number_entry_CD)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ if ((number_entry_CD!=number_entry) ||
+ (number_disk_with_CD!=0) ||
+ (number_disk!=0))
+ err=ZIP_BADZIPFILE;
+
+ /* size of the central directory */
+ if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&size_central_dir)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* offset of start of central directory with respect to the
+ starting disk number */
+ if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ /* zipfile global comment length */
+ if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK)
+ err=ZIP_ERRNO;
+
+ if ((central_pos<offset_central_dir+size_central_dir) &&
+ (err==ZIP_OK))
+ err=ZIP_BADZIPFILE;
+
+ if (err!=ZIP_OK)
+ {
+ ZCLOSE(ziinit.z_filefunc, ziinit.filestream);
+ return NULL;
+ }
+
+ if (size_comment>0)
+ {
+ ziinit.globalcomment = ALLOC(size_comment+1);
+ if (ziinit.globalcomment)
+ {
+ size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment);
+ ziinit.globalcomment[size_comment]=0;
+ }
+ }
+
+ byte_before_the_zipfile = central_pos -
+ (offset_central_dir+size_central_dir);
+ ziinit.add_position_when_writting_offset = byte_before_the_zipfile;
+
+ {
+ uLong size_central_dir_to_read = size_central_dir;
+ size_t buf_size = SIZEDATA_INDATABLOCK;
+ void* buf_read = (void*)ALLOC(buf_size);
+ if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
+ offset_central_dir + byte_before_the_zipfile,
+ ZLIB_FILEFUNC_SEEK_SET) != 0)
+ err=ZIP_ERRNO;
+
+ while ((size_central_dir_to_read>0) && (err==ZIP_OK))
+ {
+ uLong read_this = SIZEDATA_INDATABLOCK;
+ if (read_this > size_central_dir_to_read)
+ read_this = size_central_dir_to_read;
+ if (ZREAD(ziinit.z_filefunc, ziinit.filestream,buf_read,read_this) != read_this)
+ err=ZIP_ERRNO;
+
+ if (err==ZIP_OK)
+ err = add_data_in_datablock(&ziinit.central_dir,buf_read,
+ (uLong)read_this);
+ size_central_dir_to_read-=read_this;
+ }
+ TRYFREE(buf_read);
+ }
+ ziinit.begin_pos = byte_before_the_zipfile;
+ ziinit.number_entry = number_entry_CD;
+
+ if (ZSEEK(ziinit.z_filefunc, ziinit.filestream,
+ offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err=ZIP_ERRNO;
+ }
+
+ if (globalcomment)
+ {
+ *globalcomment = ziinit.globalcomment;
+ }
+# endif /* !NO_ADDFILEINEXISTINGZIP*/
+
+ if (err != ZIP_OK)
+ {
+# ifndef NO_ADDFILEINEXISTINGZIP
+ TRYFREE(ziinit.globalcomment);
+# endif /* !NO_ADDFILEINEXISTINGZIP*/
+ TRYFREE(zi);
+ return NULL;
+ }
+ else
+ {
+ *zi = ziinit;
+ return (zipFile)zi;
+ }
+}
+
+extern zipFile ZEXPORT zipOpen (pathname, append)
+ const char *pathname;
+ int append;
+{
+ return zipOpen2(pathname,append,NULL,NULL);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ windowBits, memLevel, strategy,
+ password, crcForCrypting)
+ zipFile file;
+ const char* filename;
+ const zip_fileinfo* zipfi;
+ const void* extrafield_local;
+ uInt size_extrafield_local;
+ const void* extrafield_global;
+ uInt size_extrafield_global;
+ const char* comment;
+ int method;
+ int level;
+ int raw;
+ int windowBits;
+ int memLevel;
+ int strategy;
+ const char* password;
+ uLong crcForCrypting;
+{
+ zip_internal* zi;
+ uInt size_filename;
+ uInt size_comment;
+ uInt i;
+ int err = ZIP_OK;
+
+# ifdef NOCRYPT
+ if (password != NULL)
+ return ZIP_PARAMERROR;
+# endif
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ if ((method!=0) && (method!=Z_DEFLATED))
+ return ZIP_PARAMERROR;
+
+ zi = (zip_internal*)file;
+
+ if (zi->in_opened_file_inzip == 1)
+ {
+ err = zipCloseFileInZip (file);
+ if (err != ZIP_OK)
+ return err;
+ }
+
+
+ if (filename==NULL)
+ filename="-";
+
+ if (comment==NULL)
+ size_comment = 0;
+ else
+ size_comment = (uInt)strlen(comment);
+
+ size_filename = (uInt)strlen(filename);
+
+ if (zipfi == NULL)
+ zi->ci.dosDate = 0;
+ else
+ {
+ if (zipfi->dosDate != 0)
+ zi->ci.dosDate = zipfi->dosDate;
+ else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
+ }
+
+ zi->ci.flag = 0;
+ if ((level==8) || (level==9))
+ zi->ci.flag |= 2;
+ if ((level==2))
+ zi->ci.flag |= 4;
+ if ((level==1))
+ zi->ci.flag |= 6;
+ if (password != NULL)
+ zi->ci.flag |= 1;
+
+ zi->ci.crc32 = 0;
+ zi->ci.method = method;
+ zi->ci.encrypt = 0;
+ zi->ci.stream_initialised = 0;
+ zi->ci.pos_in_buffered_data = 0;
+ zi->ci.raw = raw;
+ zi->ci.pos_local_header = ZTELL(zi->z_filefunc,zi->filestream) ;
+ zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename +
+ size_extrafield_global + size_comment;
+ zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
+
+ ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
+ /* version info */
+ ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+ ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+ ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+ ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+ ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
+
+ if (zipfi==NULL)
+ ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2);
+ else
+ ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2);
+
+ if (zipfi==NULL)
+ ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4);
+ else
+ ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
+
+ ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header- zi->add_position_when_writting_offset,4);
+
+ for (i=0;i<size_filename;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
+
+ for (i=0;i<size_extrafield_global;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
+ *(((const char*)extrafield_global)+i);
+
+ for (i=0;i<size_comment;i++)
+ *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
+ size_extrafield_global+i) = *(comment+i);
+ if (zi->ci.central_header == NULL)
+ return ZIP_INTERNALERROR;
+
+ /* write the local header */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)LOCALHEADERMAGIC,4);
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)20,2);/* version needed to extract */
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.flag,2);
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.method,2);
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->ci.dosDate,4);
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* crc 32, unknown */
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* compressed size, unknown */
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,4); /* uncompressed size, unknown */
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_filename,2);
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_extrafield_local,2);
+
+ if ((err==ZIP_OK) && (size_filename>0))
+ if (ZWRITE(zi->z_filefunc,zi->filestream,filename,size_filename)!=size_filename)
+ err = ZIP_ERRNO;
+
+ if ((err==ZIP_OK) && (size_extrafield_local>0))
+ if (ZWRITE(zi->z_filefunc,zi->filestream,extrafield_local,size_extrafield_local)
+ !=size_extrafield_local)
+ err = ZIP_ERRNO;
+
+ zi->ci.stream.avail_in = (uInt)0;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ zi->ci.stream.total_in = 0;
+ zi->ci.stream.total_out = 0;
+
+ if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ zi->ci.stream.zalloc = (alloc_func)0;
+ zi->ci.stream.zfree = (free_func)0;
+ zi->ci.stream.opaque = (voidpf)0;
+
+ if (windowBits>0)
+ windowBits = -windowBits;
+
+ err = deflateInit2(&zi->ci.stream, level,
+ Z_DEFLATED, windowBits, memLevel, strategy);
+
+ if (err==Z_OK)
+ zi->ci.stream_initialised = 1;
+ }
+# ifndef NOCRYPT
+ zi->ci.crypt_header_size = 0;
+ if ((err==Z_OK) && (password != NULL))
+ {
+ unsigned char bufHead[RAND_HEAD_LEN];
+ unsigned int sizeHead;
+ zi->ci.encrypt = 1;
+ zi->ci.pcrc_32_tab = get_crc_table();
+ /*init_keys(password,zi->ci.keys,zi->ci.pcrc_32_tab);*/
+
+ sizeHead=crypthead(password,bufHead,RAND_HEAD_LEN,zi->ci.keys,zi->ci.pcrc_32_tab,crcForCrypting);
+ zi->ci.crypt_header_size = sizeHead;
+
+ if (ZWRITE(zi->z_filefunc,zi->filestream,bufHead,sizeHead) != sizeHead)
+ err = ZIP_ERRNO;
+ }
+# endif
+
+ if (err==Z_OK)
+ zi->in_opened_file_inzip = 1;
+ return err;
+}
+
+extern int ZEXPORT zipOpenNewFileInZip2(file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw)
+ zipFile file;
+ const char* filename;
+ const zip_fileinfo* zipfi;
+ const void* extrafield_local;
+ uInt size_extrafield_local;
+ const void* extrafield_global;
+ uInt size_extrafield_global;
+ const char* comment;
+ int method;
+ int level;
+ int raw;
+{
+ return zipOpenNewFileInZip3 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, raw,
+ -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+ NULL, 0);
+}
+
+extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level)
+ zipFile file;
+ const char* filename;
+ const zip_fileinfo* zipfi;
+ const void* extrafield_local;
+ uInt size_extrafield_local;
+ const void* extrafield_global;
+ uInt size_extrafield_global;
+ const char* comment;
+ int method;
+ int level;
+{
+ return zipOpenNewFileInZip2 (file, filename, zipfi,
+ extrafield_local, size_extrafield_local,
+ extrafield_global, size_extrafield_global,
+ comment, method, level, 0);
+}
+
+local int zipFlushWriteBuffer(zi)
+ zip_internal* zi;
+{
+ int err=ZIP_OK;
+
+ if (zi->ci.encrypt != 0)
+ {
+#ifndef NOCRYPT
+ uInt i;
+ int t;
+ for (i=0;i<zi->ci.pos_in_buffered_data;i++)
+ zi->ci.buffered_data[i] = zencode(zi->ci.keys, zi->ci.pcrc_32_tab,
+ zi->ci.buffered_data[i],t);
+#endif
+ }
+ if (ZWRITE(zi->z_filefunc,zi->filestream,zi->ci.buffered_data,zi->ci.pos_in_buffered_data)
+ !=zi->ci.pos_in_buffered_data)
+ err = ZIP_ERRNO;
+ zi->ci.pos_in_buffered_data = 0;
+ return err;
+}
+
+extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
+ zipFile file;
+ const void* buf;
+ unsigned len;
+{
+ zip_internal* zi;
+ int err=ZIP_OK;
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ zi = (zip_internal*)file;
+
+ if (zi->in_opened_file_inzip == 0)
+ return ZIP_PARAMERROR;
+
+ zi->ci.stream.next_in = (void*)buf;
+ zi->ci.stream.avail_in = len;
+ zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
+
+ while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
+ {
+ if (zi->ci.stream.avail_out == 0)
+ {
+ if (zipFlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ }
+
+
+ if(err != ZIP_OK)
+ break;
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ uLong uTotalOutBefore = zi->ci.stream.total_out;
+ err=deflate(&zi->ci.stream, Z_NO_FLUSH);
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+
+ }
+ else
+ {
+ uInt copy_this,i;
+ if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
+ copy_this = zi->ci.stream.avail_in;
+ else
+ copy_this = zi->ci.stream.avail_out;
+ for (i=0;i<copy_this;i++)
+ *(((char*)zi->ci.stream.next_out)+i) =
+ *(((const char*)zi->ci.stream.next_in)+i);
+ {
+ zi->ci.stream.avail_in -= copy_this;
+ zi->ci.stream.avail_out-= copy_this;
+ zi->ci.stream.next_in+= copy_this;
+ zi->ci.stream.next_out+= copy_this;
+ zi->ci.stream.total_in+= copy_this;
+ zi->ci.stream.total_out+= copy_this;
+ zi->ci.pos_in_buffered_data += copy_this;
+ }
+ }
+ }
+
+ return err;
+}
+
+extern int ZEXPORT zipCloseFileInZipRaw (file, uncompressed_size, crc32)
+ zipFile file;
+ uLong uncompressed_size;
+ uLong crc32;
+{
+ zip_internal* zi;
+ uLong compressed_size;
+ int err=ZIP_OK;
+
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ zi = (zip_internal*)file;
+
+ if (zi->in_opened_file_inzip == 0)
+ return ZIP_PARAMERROR;
+ zi->ci.stream.avail_in = 0;
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ while (err==ZIP_OK)
+ {
+ uLong uTotalOutBefore;
+ if (zi->ci.stream.avail_out == 0)
+ {
+ if (zipFlushWriteBuffer(zi) == ZIP_ERRNO)
+ err = ZIP_ERRNO;
+ zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+ zi->ci.stream.next_out = zi->ci.buffered_data;
+ }
+ uTotalOutBefore = zi->ci.stream.total_out;
+ err=deflate(&zi->ci.stream, Z_FINISH);
+ zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+ }
+
+ if (err==Z_STREAM_END)
+ err=ZIP_OK; /* this is normal */
+
+ if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
+ if (zipFlushWriteBuffer(zi)==ZIP_ERRNO)
+ err = ZIP_ERRNO;
+
+ if ((zi->ci.method == Z_DEFLATED) && (!zi->ci.raw))
+ {
+ err=deflateEnd(&zi->ci.stream);
+ zi->ci.stream_initialised = 0;
+ }
+
+ if (!zi->ci.raw)
+ {
+ crc32 = (uLong)zi->ci.crc32;
+ uncompressed_size = (uLong)zi->ci.stream.total_in;
+ }
+ compressed_size = (uLong)zi->ci.stream.total_out;
+# ifndef NOCRYPT
+ compressed_size += zi->ci.crypt_header_size;
+# endif
+
+ ziplocal_putValue_inmemory(zi->ci.central_header+16,crc32,4); /*crc*/
+ ziplocal_putValue_inmemory(zi->ci.central_header+20,
+ compressed_size,4); /*compr size*/
+ if (zi->ci.stream.data_type == Z_ASCII)
+ ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)Z_ASCII,2);
+ ziplocal_putValue_inmemory(zi->ci.central_header+24,
+ uncompressed_size,4); /*uncompr size*/
+
+ if (err==ZIP_OK)
+ err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
+ (uLong)zi->ci.size_centralheader);
+ free(zi->ci.central_header);
+
+ if (err==ZIP_OK)
+ {
+ long cur_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
+ if (ZSEEK(zi->z_filefunc,zi->filestream,
+ zi->ci.pos_local_header + 14,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err = ZIP_ERRNO;
+
+ if (err==ZIP_OK)
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */
+
+ if (err==ZIP_OK) /* compressed size, unknown */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,compressed_size,4);
+
+ if (err==ZIP_OK) /* uncompressed size, unknown */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,uncompressed_size,4);
+
+ if (ZSEEK(zi->z_filefunc,zi->filestream,
+ cur_pos_inzip,ZLIB_FILEFUNC_SEEK_SET)!=0)
+ err = ZIP_ERRNO;
+ }
+
+ zi->number_entry ++;
+ zi->in_opened_file_inzip = 0;
+
+ return err;
+}
+
+extern int ZEXPORT zipCloseFileInZip (file)
+ zipFile file;
+{
+ return zipCloseFileInZipRaw (file,0,0);
+}
+
+extern int ZEXPORT zipClose (file, global_comment)
+ zipFile file;
+ const char* global_comment;
+{
+ zip_internal* zi;
+ int err = 0;
+ uLong size_centraldir = 0;
+ uLong centraldir_pos_inzip;
+ uInt size_global_comment;
+ if (file == NULL)
+ return ZIP_PARAMERROR;
+ zi = (zip_internal*)file;
+
+ if (zi->in_opened_file_inzip == 1)
+ {
+ err = zipCloseFileInZip (file);
+ }
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+ if (global_comment==NULL)
+ global_comment = zi->globalcomment;
+#endif
+ if (global_comment==NULL)
+ size_global_comment = 0;
+ else
+ size_global_comment = (uInt)strlen(global_comment);
+
+ centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
+ if (err==ZIP_OK)
+ {
+ linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
+ while (ldi!=NULL)
+ {
+ if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
+ if (ZWRITE(zi->z_filefunc,zi->filestream,
+ ldi->data,ldi->filled_in_this_block)
+ !=ldi->filled_in_this_block )
+ err = ZIP_ERRNO;
+
+ size_centraldir += ldi->filled_in_this_block;
+ ldi = ldi->next_datablock;
+ }
+ }
+ free_datablock(zi->central_dir.first_block);
+
+ if (err==ZIP_OK) /* Magic End */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)ENDHEADERMAGIC,4);
+
+ if (err==ZIP_OK) /* number of this disk */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
+
+ if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)0,2);
+
+ if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
+
+ if (err==ZIP_OK) /* total number of entries in the central dir */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)zi->number_entry,2);
+
+ if (err==ZIP_OK) /* size of the central directory */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_centraldir,4);
+
+ if (err==ZIP_OK) /* offset of start of central directory with respect to the
+ starting disk number */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,
+ (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
+
+ if (err==ZIP_OK) /* zipfile comment length */
+ err = ziplocal_putValue(&zi->z_filefunc,zi->filestream,(uLong)size_global_comment,2);
+
+ if ((err==ZIP_OK) && (size_global_comment>0))
+ if (ZWRITE(zi->z_filefunc,zi->filestream,
+ global_comment,size_global_comment) != size_global_comment)
+ err = ZIP_ERRNO;
+
+ if (ZCLOSE(zi->z_filefunc,zi->filestream) != 0)
+ if (err == ZIP_OK)
+ err = ZIP_ERRNO;
+
+#ifndef NO_ADDFILEINEXISTINGZIP
+ TRYFREE(zi->globalcomment);
+#endif
+ TRYFREE(zi);
+
+ return err;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.h (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/minizip/zip.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,235 @@
+/* zip.h -- IO for compress .zip files using zlib
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+ WinZip, InfoZip tools and compatible.
+ Multi volume ZipFile (span) are not supported.
+ Encryption compatible with pkzip 2.04g only supported
+ Old compressions used by old PKZip 1.x are not supported
+
+ For uncompress .zip file, look at unzip.h
+
+
+ I WAIT FEEDBACK at mail info at winimage.com
+ Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
+
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see
+ http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+ http://www.info-zip.org/pub/infozip/doc/
+ PkWare has also a specification at :
+ ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+ from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__;
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK (0)
+#define ZIP_EOF (0)
+#define ZIP_ERRNO (Z_ERRNO)
+#define ZIP_PARAMERROR (-102)
+#define ZIP_BADZIPFILE (-103)
+#define ZIP_INTERNALERROR (-104)
+
+#ifndef DEF_MEM_LEVEL
+# if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+# else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+# endif
+#endif
+/* default memLevel */
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s
+{
+ uInt tm_sec; /* seconds after the minute - [0,59] */
+ uInt tm_min; /* minutes after the hour - [0,59] */
+ uInt tm_hour; /* hours since midnight - [0,23] */
+ uInt tm_mday; /* day of the month - [1,31] */
+ uInt tm_mon; /* months since January - [0,11] */
+ uInt tm_year; /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+ tm_zip tmz_date; /* date in understandable format */
+ uLong dosDate; /* if dos_date == 0, tmu_date is used */
+/* uLong flag; */ /* general purpose bit flag 2 bytes */
+
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+} zip_fileinfo;
+
+typedef const char* zipcharpc;
+
+
+#define APPEND_STATUS_CREATE (0)
+#define APPEND_STATUS_CREATEAFTER (1)
+#define APPEND_STATUS_ADDINZIP (2)
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+ Create a zipfile.
+ pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
+ an Unix computer "zlib/zlib113.zip".
+ if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
+ will be created at the end of the file.
+ (useful if the file contain a self extractor code)
+ if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
+ add files in existing zip (be sure you don't add file that doesn't exist)
+ If the zipfile cannot be opened, the return value is NULL.
+ Else, the return value is a zipFile Handle, usable with other function
+ of this zip package.
+*/
+
+/* Note : there is no delete function into a zipfile.
+ If you want delete file into a zipfile, you must open a zipfile, and create another
+ Of couse, you can use RAW reading and writing to copy the file you did not want delte
+*/
+
+extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
+ int append,
+ zipcharpc* globalcomment,
+ zlib_filefunc_def* pzlib_filefunc_def));
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level));
+/*
+ Open a file in the ZIP for writing.
+ filename : the filename in zip (if NULL, '-' without quote will be used
+ *zipfi contain supplemental information
+ if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+ contains the extrafield data the the local header
+ if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+ contains the extrafield data the the local header
+ if comment != NULL, comment contain the comment string
+ method contain the compression method (0 for store, Z_DEFLATED for deflate)
+ level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+
+extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw));
+
+/*
+ Same than zipOpenNewFileInZip, except if raw=1, we write raw file
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
+ const char* filename,
+ const zip_fileinfo* zipfi,
+ const void* extrafield_local,
+ uInt size_extrafield_local,
+ const void* extrafield_global,
+ uInt size_extrafield_global,
+ const char* comment,
+ int method,
+ int level,
+ int raw,
+ int windowBits,
+ int memLevel,
+ int strategy,
+ const char* password,
+ uLong crcForCtypting));
+
+/*
+ Same than zipOpenNewFileInZip2, except
+ windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
+ password : crypting password (NULL for no crypting)
+ crcForCtypting : crc of file to compress (needed for crypting)
+ */
+
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+ const void* buf,
+ unsigned len));
+/*
+ Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+ Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
+ uLong uncompressed_size,
+ uLong crc32));
+/*
+ Close the current file in the zipfile, for fiel opened with
+ parameter raw=1 in zipOpenNewFileInZip2
+ uncompressed_size and crc32 are value for the uncompressed size
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+ const char* global_comment));
+/*
+ Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */
Added: llvm-gcc-4.2/trunk/zlib/contrib/pascal/example.pas
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/pascal/example.pas?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/pascal/example.pas (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/pascal/example.pas Thu Nov 8 16:56:19 2007
@@ -0,0 +1,599 @@
+(* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Pascal translation
+ * Copyright (C) 1998 by Jacques Nomssi Nzali.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *
+ * Adaptation to the zlibpas interface
+ * Copyright (C) 2003 by Cosmin Truta.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+program example;
+
+{$DEFINE TEST_COMPRESS}
+{DO NOT $DEFINE TEST_GZIO}
+{$DEFINE TEST_DEFLATE}
+{$DEFINE TEST_INFLATE}
+{$DEFINE TEST_FLUSH}
+{$DEFINE TEST_SYNC}
+{$DEFINE TEST_DICT}
+
+uses SysUtils, zlibpas;
+
+const TESTFILE = 'foo.gz';
+
+(* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ *)
+const hello: PChar = 'hello, hello!';
+
+const dictionary: PChar = 'hello';
+
+var dictId: LongInt; (* Adler32 value of the dictionary *)
+
+procedure CHECK_ERR(err: Integer; msg: String);
+begin
+ if err <> Z_OK then
+ begin
+ WriteLn(msg, ' error: ', err);
+ Halt(1);
+ end;
+end;
+
+procedure EXIT_ERR(const msg: String);
+begin
+ WriteLn('Error: ', msg);
+ Halt(1);
+end;
+
+(* ===========================================================================
+ * Test compress and uncompress
+ *)
+{$IFDEF TEST_COMPRESS}
+procedure test_compress(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ len: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ err := compress(compr, comprLen, hello, len);
+ CHECK_ERR(err, 'compress');
+
+ StrCopy(PChar(uncompr), 'garbage');
+
+ err := uncompress(uncompr, uncomprLen, compr, comprLen);
+ CHECK_ERR(err, 'uncompress');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad uncompress')
+ else
+ WriteLn('uncompress(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test read/write of .gz files
+ *)
+{$IFDEF TEST_GZIO}
+procedure test_gzio(const fname: PChar; (* compressed file name *)
+ uncompr: Pointer;
+ uncomprLen: LongInt);
+var err: Integer;
+ len: Integer;
+ zfile: gzFile;
+ pos: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ zfile := gzopen(fname, 'wb');
+ if zfile = NIL then
+ begin
+ WriteLn('gzopen error');
+ Halt(1);
+ end;
+ gzputc(zfile, 'h');
+ if gzputs(zfile, 'ello') <> 4 then
+ begin
+ WriteLn('gzputs err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$IFDEF GZ_FORMAT_STRING}
+ if gzprintf(zfile, ', %s!', 'hello') <> 8 then
+ begin
+ WriteLn('gzprintf err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$ELSE}
+ if gzputs(zfile, ', hello!') <> 8 then
+ begin
+ WriteLn('gzputs err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ {$ENDIF}
+ gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *)
+ gzclose(zfile);
+
+ zfile := gzopen(fname, 'rb');
+ if zfile = NIL then
+ begin
+ WriteLn('gzopen error');
+ Halt(1);
+ end;
+
+ StrCopy(PChar(uncompr), 'garbage');
+
+ if gzread(zfile, uncompr, uncomprLen) <> len then
+ begin
+ WriteLn('gzread err: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ begin
+ WriteLn('bad gzread: ', PChar(uncompr));
+ Halt(1);
+ end
+ else
+ WriteLn('gzread(): ', PChar(uncompr));
+
+ pos := gzseek(zfile, -8, SEEK_CUR);
+ if (pos <> 6) or (gztell(zfile) <> pos) then
+ begin
+ WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile));
+ Halt(1);
+ end;
+
+ if gzgetc(zfile) <> ' ' then
+ begin
+ WriteLn('gzgetc error');
+ Halt(1);
+ end;
+
+ if gzungetc(' ', zfile) <> ' ' then
+ begin
+ WriteLn('gzungetc error');
+ Halt(1);
+ end;
+
+ gzgets(zfile, PChar(uncompr), uncomprLen);
+ uncomprLen := StrLen(PChar(uncompr));
+ if uncomprLen <> 7 then (* " hello!" *)
+ begin
+ WriteLn('gzgets err after gzseek: ', gzerror(zfile, err));
+ Halt(1);
+ end;
+ if StrComp(PChar(uncompr), hello + 6) <> 0 then
+ begin
+ WriteLn('bad gzgets after gzseek');
+ Halt(1);
+ end
+ else
+ WriteLn('gzgets() after gzseek: ', PChar(uncompr));
+
+ gzclose(zfile);
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with small buffers
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+ len: LongInt;
+begin
+ len := StrLen(hello)+1;
+
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_in := hello;
+ c_stream.next_out := compr;
+
+ while (c_stream.total_in <> len) and
+ (c_stream.total_out < comprLen) do
+ begin
+ c_stream.avail_out := 1; { force small buffers }
+ c_stream.avail_in := 1;
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+ end;
+
+ (* Finish the stream, still forcing small buffers: *)
+ while TRUE do
+ begin
+ c_stream.avail_out := 1;
+ err := deflate(c_stream, Z_FINISH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'deflate');
+ end;
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with small buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_inflate(compr: Pointer; comprLen : LongInt;
+ uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := 0;
+ d_stream.next_out := uncompr;
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ while (d_stream.total_out < uncomprLen) and
+ (d_stream.total_in < comprLen) do
+ begin
+ d_stream.avail_out := 1; (* force small buffers *)
+ d_stream.avail_in := 1;
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'inflate');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad inflate')
+ else
+ WriteLn('inflate(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with large buffers and dynamic change of compression level
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_large_deflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+begin
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_out := compr;
+ c_stream.avail_out := Integer(comprLen);
+
+ (* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ *)
+ c_stream.next_in := uncompr;
+ c_stream.avail_in := Integer(uncomprLen);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+ if c_stream.avail_in <> 0 then
+ EXIT_ERR('deflate not greedy');
+
+ (* Feed in already compressed data and switch to no compression: *)
+ deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in := compr;
+ c_stream.avail_in := Integer(comprLen div 2);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ (* Switch back to compressing mode: *)
+ deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in := uncompr;
+ c_stream.avail_in := Integer(uncomprLen);
+ err := deflate(c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ EXIT_ERR('deflate should report Z_STREAM_END');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with large buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_large_inflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := Integer(comprLen);
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ while TRUE do
+ begin
+ d_stream.next_out := uncompr; (* discard the output *)
+ d_stream.avail_out := Integer(uncomprLen);
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ CHECK_ERR(err, 'large inflate');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then
+ begin
+ WriteLn('bad large inflate: ', d_stream.total_out);
+ Halt(1);
+ end
+ else
+ WriteLn('large_inflate(): OK');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with full flush
+ *)
+{$IFDEF TEST_FLUSH}
+procedure test_flush(compr: Pointer; var comprLen : LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+ len: Integer;
+begin
+ len := StrLen(hello)+1;
+
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ c_stream.next_in := hello;
+ c_stream.next_out := compr;
+ c_stream.avail_in := 3;
+ c_stream.avail_out := Integer(comprLen);
+ err := deflate(c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, 'deflate');
+
+ Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *)
+ c_stream.avail_in := len - 3;
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ CHECK_ERR(err, 'deflate');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+
+ comprLen := c_stream.total_out;
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflateSync()
+ *)
+{$IFDEF TEST_SYNC}
+procedure test_sync(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := 2; (* just read the zlib header *)
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ d_stream.next_out := uncompr;
+ d_stream.avail_out := Integer(uncomprLen);
+
+ inflate(d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, 'inflate');
+
+ d_stream.avail_in := Integer(comprLen-2); (* read all compressed data *)
+ err := inflateSync(d_stream); (* but skip the damaged part *)
+ CHECK_ERR(err, 'inflateSync');
+
+ err := inflate(d_stream, Z_FINISH);
+ if err <> Z_DATA_ERROR then
+ EXIT_ERR('inflate should report DATA_ERROR');
+ (* Because of incorrect adler32 *)
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ WriteLn('after inflateSync(): hel', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+ err: Integer;
+begin
+ c_stream.zalloc := NIL;
+ c_stream.zfree := NIL;
+ c_stream.opaque := NIL;
+
+ err := deflateInit(c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, 'deflateInit');
+
+ err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary));
+ CHECK_ERR(err, 'deflateSetDictionary');
+
+ dictId := c_stream.adler;
+ c_stream.next_out := compr;
+ c_stream.avail_out := Integer(comprLen);
+
+ c_stream.next_in := hello;
+ c_stream.avail_in := StrLen(hello)+1;
+
+ err := deflate(c_stream, Z_FINISH);
+ if err <> Z_STREAM_END then
+ EXIT_ERR('deflate should report Z_STREAM_END');
+
+ err := deflateEnd(c_stream);
+ CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with a preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_inflate(compr: Pointer; comprLen: LongInt;
+ uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+ d_stream: z_stream; (* decompression stream *)
+begin
+ StrCopy(PChar(uncompr), 'garbage');
+
+ d_stream.zalloc := NIL;
+ d_stream.zfree := NIL;
+ d_stream.opaque := NIL;
+
+ d_stream.next_in := compr;
+ d_stream.avail_in := Integer(comprLen);
+
+ err := inflateInit(d_stream);
+ CHECK_ERR(err, 'inflateInit');
+
+ d_stream.next_out := uncompr;
+ d_stream.avail_out := Integer(uncomprLen);
+
+ while TRUE do
+ begin
+ err := inflate(d_stream, Z_NO_FLUSH);
+ if err = Z_STREAM_END then
+ break;
+ if err = Z_NEED_DICT then
+ begin
+ if d_stream.adler <> dictId then
+ EXIT_ERR('unexpected dictionary');
+ err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary));
+ end;
+ CHECK_ERR(err, 'inflate with dict');
+ end;
+
+ err := inflateEnd(d_stream);
+ CHECK_ERR(err, 'inflateEnd');
+
+ if StrComp(PChar(uncompr), hello) <> 0 then
+ EXIT_ERR('bad inflate with dict')
+ else
+ WriteLn('inflate with dictionary: ', PChar(uncompr));
+end;
+{$ENDIF}
+
+var compr, uncompr: Pointer;
+ comprLen, uncomprLen: LongInt;
+
+begin
+ if zlibVersion^ <> ZLIB_VERSION[1] then
+ EXIT_ERR('Incompatible zlib version');
+
+ WriteLn('zlib version: ', zlibVersion);
+ WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags]));
+
+ comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *)
+ uncomprLen := comprLen;
+ GetMem(compr, comprLen);
+ GetMem(uncompr, uncomprLen);
+ if (compr = NIL) or (uncompr = NIL) then
+ EXIT_ERR('Out of memory');
+ (* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ *)
+ FillChar(compr^, comprLen, 0);
+ FillChar(uncompr^, uncomprLen, 0);
+
+ {$IFDEF TEST_COMPRESS}
+ WriteLn('** Testing compress');
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_GZIO}
+ WriteLn('** Testing gzio');
+ if ParamCount >= 1 then
+ test_gzio(ParamStr(1), uncompr, uncomprLen)
+ else
+ test_gzio(TESTFILE, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_DEFLATE}
+ WriteLn('** Testing deflate with small buffers');
+ test_deflate(compr, comprLen);
+ {$ENDIF}
+ {$IFDEF TEST_INFLATE}
+ WriteLn('** Testing inflate with small buffers');
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_DEFLATE}
+ WriteLn('** Testing deflate with large buffers');
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+ {$IFDEF TEST_INFLATE}
+ WriteLn('** Testing inflate with large buffers');
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ {$IFDEF TEST_FLUSH}
+ WriteLn('** Testing deflate with full flush');
+ test_flush(compr, comprLen);
+ {$ENDIF}
+ {$IFDEF TEST_SYNC}
+ WriteLn('** Testing inflateSync');
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+ comprLen := uncomprLen;
+
+ {$IFDEF TEST_DICT}
+ WriteLn('** Testing deflate and inflate with preset dictionary');
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+ {$ENDIF}
+
+ FreeMem(compr, comprLen);
+ FreeMem(uncompr, uncomprLen);
+end.
Added: llvm-gcc-4.2/trunk/zlib/contrib/pascal/readme.txt
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/pascal/readme.txt?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/pascal/readme.txt (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/pascal/readme.txt Thu Nov 8 16:56:19 2007
@@ -0,0 +1,76 @@
+
+This directory contains a Pascal (Delphi, Kylix) interface to the
+zlib data compression library.
+
+
+Directory listing
+=================
+
+zlibd32.mak makefile for Borland C++
+example.pas usage example of zlib
+zlibpas.pas the Pascal interface to zlib
+readme.txt this file
+
+
+Compatibility notes
+===================
+
+- Although the name "zlib" would have been more normal for the
+ zlibpas unit, this name is already taken by Borland's ZLib unit.
+ This is somehow unfortunate, because that unit is not a genuine
+ interface to the full-fledged zlib functionality, but a suite of
+ class wrappers around zlib streams. Other essential features,
+ such as checksums, are missing.
+ It would have been more appropriate for that unit to have a name
+ like "ZStreams", or something similar.
+
+- The C and zlib-supplied types int, uInt, long, uLong, etc. are
+ translated directly into Pascal types of similar sizes (Integer,
+ LongInt, etc.), to avoid namespace pollution. In particular,
+ there is no conversion of unsigned int into a Pascal unsigned
+ integer. The Word type is non-portable and has the same size
+ (16 bits) both in a 16-bit and in a 32-bit environment, unlike
+ Integer. Even if there is a 32-bit Cardinal type, there is no
+ real need for unsigned int in zlib under a 32-bit environment.
+
+- Except for the callbacks, the zlib function interfaces are
+ assuming the calling convention normally used in Pascal
+ (__pascal for DOS and Windows16, __fastcall for Windows32).
+ Since the cdecl keyword is used, the old Turbo Pascal does
+ not work with this interface.
+
+- The gz* function interfaces are not translated, to avoid
+ interfacing problems with the C runtime library. Besides,
+ gzprintf(gzFile file, const char *format, ...)
+ cannot be translated into Pascal.
+
+
+Legal issues
+============
+
+The zlibpas interface is:
+ Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler.
+ Copyright (C) 1998 by Bob Dellaca.
+ Copyright (C) 2003 by Cosmin Truta.
+
+The example program is:
+ Copyright (C) 1995-2003 by Jean-loup Gailly.
+ Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali.
+ Copyright (C) 2003 by Cosmin Truta.
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
Added: llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibd32.mak
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibd32.mak?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibd32.mak (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibd32.mak Thu Nov 8 16:56:19 2007
@@ -0,0 +1,93 @@
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+ -del *.obj
+ -del *.exe
+ -del *.lib
+ -del *.tds
+ -del zlib.bak
+ -del foo.gz
+
Added: llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibpas.pas
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibpas.pas?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibpas.pas (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/pascal/zlibpas.pas Thu Nov 8 16:56:19 2007
@@ -0,0 +1,236 @@
+(* zlibpas -- Pascal interface to the zlib data compression library
+ *
+ * Copyright (C) 2003 Cosmin Truta.
+ * Derived from original sources by Bob Dellaca.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+unit zlibpas;
+
+interface
+
+const
+ ZLIB_VERSION = '1.2.3';
+
+type
+ alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
+ cdecl;
+ free_func = procedure(opaque, address: Pointer);
+ cdecl;
+
+ in_func = function(opaque: Pointer; var buf: PByte): Integer;
+ cdecl;
+ out_func = function(opaque: Pointer; buf: PByte; size: Integer): Integer;
+ cdecl;
+
+ z_streamp = ^z_stream;
+ z_stream = packed record
+ next_in: PChar; (* next input byte *)
+ avail_in: Integer; (* number of bytes available at next_in *)
+ total_in: LongInt; (* total nb of input bytes read so far *)
+
+ next_out: PChar; (* next output byte should be put there *)
+ avail_out: Integer; (* remaining free space at next_out *)
+ total_out: LongInt; (* total nb of bytes output so far *)
+
+ msg: PChar; (* last error message, NULL if no error *)
+ state: Pointer; (* not visible by applications *)
+
+ zalloc: alloc_func; (* used to allocate the internal state *)
+ zfree: free_func; (* used to free the internal state *)
+ opaque: Pointer; (* private data object passed to zalloc and zfree *)
+
+ data_type: Integer; (* best guess about the data type: ascii or binary *)
+ adler: LongInt; (* adler32 value of the uncompressed data *)
+ reserved: LongInt; (* reserved for future use *)
+ end;
+
+(* constants *)
+const
+ Z_NO_FLUSH = 0;
+ Z_PARTIAL_FLUSH = 1;
+ Z_SYNC_FLUSH = 2;
+ Z_FULL_FLUSH = 3;
+ Z_FINISH = 4;
+
+ Z_OK = 0;
+ Z_STREAM_END = 1;
+ Z_NEED_DICT = 2;
+ Z_ERRNO = -1;
+ Z_STREAM_ERROR = -2;
+ Z_DATA_ERROR = -3;
+ Z_MEM_ERROR = -4;
+ Z_BUF_ERROR = -5;
+ Z_VERSION_ERROR = -6;
+
+ Z_NO_COMPRESSION = 0;
+ Z_BEST_SPEED = 1;
+ Z_BEST_COMPRESSION = 9;
+ Z_DEFAULT_COMPRESSION = -1;
+
+ Z_FILTERED = 1;
+ Z_HUFFMAN_ONLY = 2;
+ Z_RLE = 3;
+ Z_DEFAULT_STRATEGY = 0;
+
+ Z_BINARY = 0;
+ Z_ASCII = 1;
+ Z_UNKNOWN = 2;
+
+ Z_DEFLATED = 8;
+
+(* basic functions *)
+function zlibVersion: PChar;
+function deflateInit(var strm: z_stream; level: Integer): Integer;
+function deflate(var strm: z_stream; flush: Integer): Integer;
+function deflateEnd(var strm: z_stream): Integer;
+function inflateInit(var strm: z_stream): Integer;
+function inflate(var strm: z_stream; flush: Integer): Integer;
+function inflateEnd(var strm: z_stream): Integer;
+
+(* advanced functions *)
+function deflateInit2(var strm: z_stream; level, method, windowBits,
+ memLevel, strategy: Integer): Integer;
+function deflateSetDictionary(var strm: z_stream; const dictionary: PChar;
+ dictLength: Integer): Integer;
+function deflateCopy(var dest, source: z_stream): Integer;
+function deflateReset(var strm: z_stream): Integer;
+function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
+function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
+function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
+function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
+ dictLength: Integer): Integer;
+function inflateSync(var strm: z_stream): Integer;
+function inflateCopy(var dest, source: z_stream): Integer;
+function inflateReset(var strm: z_stream): Integer;
+function inflateBackInit(var strm: z_stream;
+ windowBits: Integer; window: PChar): Integer;
+function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer;
+ out_fn: out_func; out_desc: Pointer): Integer;
+function inflateBackEnd(var strm: z_stream): Integer;
+function zlibCompileFlags: LongInt;
+
+(* utility functions *)
+function compress(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt): Integer;
+function compress2(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt;
+ level: Integer): Integer;
+function compressBound(sourceLen: LongInt): LongInt;
+function uncompress(dest: PChar; var destLen: LongInt;
+ const source: PChar; sourceLen: LongInt): Integer;
+
+(* checksum functions *)
+function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt;
+function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt;
+
+(* various hacks, don't look :) *)
+function deflateInit_(var strm: z_stream; level: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateInit_(var strm: z_stream; const version: PChar;
+ stream_size: Integer): Integer;
+function deflateInit2_(var strm: z_stream;
+ level, method, windowBits, memLevel, strategy: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateInit2_(var strm: z_stream; windowBits: Integer;
+ const version: PChar; stream_size: Integer): Integer;
+function inflateBackInit_(var strm: z_stream;
+ windowBits: Integer; window: PChar;
+ const version: PChar; stream_size: Integer): Integer;
+
+
+implementation
+
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
+{$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
+
+function adler32; external;
+function compress; external;
+function compress2; external;
+function compressBound; external;
+function crc32; external;
+function deflate; external;
+function deflateBound; external;
+function deflateCopy; external;
+function deflateEnd; external;
+function deflateInit_; external;
+function deflateInit2_; external;
+function deflateParams; external;
+function deflatePrime; external;
+function deflateReset; external;
+function deflateSetDictionary; external;
+function inflate; external;
+function inflateBack; external;
+function inflateBackEnd; external;
+function inflateBackInit_; external;
+function inflateCopy; external;
+function inflateEnd; external;
+function inflateInit_; external;
+function inflateInit2_; external;
+function inflateReset; external;
+function inflateSetDictionary; external;
+function inflateSync; external;
+function uncompress; external;
+function zlibCompileFlags; external;
+function zlibVersion; external;
+
+function deflateInit(var strm: z_stream; level: Integer): Integer;
+begin
+ Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(var strm: z_stream; level, method, windowBits, memLevel,
+ strategy: Integer): Integer;
+begin
+ Result := deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(var strm: z_stream): Integer;
+begin
+ Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
+begin
+ Result := inflateInit2_(strm, windowBits, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateBackInit(var strm: z_stream;
+ windowBits: Integer; window: PChar): Integer;
+begin
+ Result := inflateBackInit_(strm, windowBits, window,
+ ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+ GetMem(Result, Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+ FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
+begin
+ FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
+begin
+ Move(source^, dest^, count);
+end;
+
+end.
Added: llvm-gcc-4.2/trunk/zlib/contrib/puff/Makefile
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/puff/Makefile?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/puff/Makefile (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/puff/Makefile Thu Nov 8 16:56:19 2007
@@ -0,0 +1,8 @@
+puff: puff.c puff.h
+ cc -DTEST -o puff puff.c
+
+test: puff
+ puff zeros.raw
+
+clean:
+ rm -f puff puff.o
Added: llvm-gcc-4.2/trunk/zlib/contrib/puff/README
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/puff/README?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/puff/README (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/puff/README Thu Nov 8 16:56:19 2007
@@ -0,0 +1,63 @@
+Puff -- A Simple Inflate
+3 Mar 2003
+Mark Adler
+madler at alumni.caltech.edu
+
+What this is --
+
+puff.c provides the routine puff() to decompress the deflate data format. It
+does so more slowly than zlib, but the code is about one-fifth the size of the
+inflate code in zlib, and written to be very easy to read.
+
+Why I wrote this --
+
+puff.c was written to document the deflate format unambiguously, by virtue of
+being working C code. It is meant to supplement RFC 1951, which formally
+describes the deflate format. I have received many questions on details of the
+deflate format, and I hope that reading this code will answer those questions.
+puff.c is heavily commented with details of the deflate format, especially
+those little nooks and cranies of the format that might not be obvious from a
+specification.
+
+puff.c may also be useful in applications where code size or memory usage is a
+very limited resource, and speed is not as important.
+
+How to use it --
+
+Well, most likely you should just be reading puff.c and using zlib for actual
+applications, but if you must ...
+
+Include puff.h in your code, which provides this prototype:
+
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen); /* amount of input available */
+
+Then you can call puff() to decompress a deflate stream that is in memory in
+its entirety at source, to a sufficiently sized block of memory for the
+decompressed data at dest. puff() is the only external symbol in puff.c The
+only C library functions that puff.c needs are setjmp() and longjmp(), which
+are used to simplify error checking in the code to improve readabilty. puff.c
+does no memory allocation, and uses less than 2K bytes off of the stack.
+
+If destlen is not enough space for the uncompressed data, then inflate will
+return an error without writing more than destlen bytes. Note that this means
+that in order to decompress the deflate data successfully, you need to know
+the size of the uncompressed data ahead of time.
+
+If needed, puff() can determine the size of the uncompressed data with no
+output space. This is done by passing dest equal to (unsigned char *)0. Then
+the initial value of *destlen is ignored and *destlen is set to the length of
+the uncompressed data. So if the size of the uncompressed data is not known,
+then two passes of puff() can be used--first to determine the size, and second
+to do the actual inflation after allocating the appropriate memory. Not
+pretty, but it works. (This is one of the reasons you should be using zlib.)
+
+The deflate format is self-terminating. If the deflate stream does not end
+in *sourcelen bytes, puff() will return an error without reading at or past
+endsource.
+
+On return, *sourcelen is updated to the amount of input data consumed, and
+*destlen is updated to the size of the uncompressed data. See the comments
+in puff.c for the possible return codes for puff().
Added: llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,837 @@
+/*
+ * puff.c
+ * Copyright (C) 2002-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 1.8, 9 Jan 2004
+ *
+ * puff.c is a simple inflate written to be an unambiguous way to specify the
+ * deflate format. It is not written for speed but rather simplicity. As a
+ * side benefit, this code might actually be useful when small code is more
+ * important than speed, such as bootstrap applications. For typical deflate
+ * data, zlib's inflate() is about four times as fast as puff(). zlib's
+ * inflate compiles to around 20K on my machine, whereas puff.c compiles to
+ * around 4K on my machine (a PowerPC using GNU cc). If the faster decode()
+ * function here is used, then puff() is only twice as slow as zlib's
+ * inflate().
+ *
+ * All dynamically allocated memory comes from the stack. The stack required
+ * is less than 2K bytes. This code is compatible with 16-bit int's and
+ * assumes that long's are at least 32 bits. puff.c uses the short data type,
+ * assumed to be 16 bits, for arrays in order to to conserve memory. The code
+ * works whether integers are stored big endian or little endian.
+ *
+ * In the comments below are "Format notes" that describe the inflate process
+ * and document some of the less obvious aspects of the format. This source
+ * code is meant to supplement RFC 1951, which formally describes the deflate
+ * format:
+ *
+ * http://www.zlib.org/rfc-deflate.html
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 10 Feb 2002 - First version
+ * 1.1 17 Feb 2002 - Clarifications of some comments and notes
+ * - Update puff() dest and source pointers on negative
+ * errors to facilitate debugging deflators
+ * - Remove longest from struct huffman -- not needed
+ * - Simplify offs[] index in construct()
+ * - Add input size and checking, using longjmp() to
+ * maintain easy readability
+ * - Use short data type for large arrays
+ * - Use pointers instead of long to specify source and
+ * destination sizes to avoid arbitrary 4 GB limits
+ * 1.2 17 Mar 2002 - Add faster version of decode(), doubles speed (!),
+ * but leave simple version for readabilty
+ * - Make sure invalid distances detected if pointers
+ * are 16 bits
+ * - Fix fixed codes table error
+ * - Provide a scanning mode for determining size of
+ * uncompressed data
+ * 1.3 20 Mar 2002 - Go back to lengths for puff() parameters [Jean-loup]
+ * - Add a puff.h file for the interface
+ * - Add braces in puff() for else do [Jean-loup]
+ * - Use indexes instead of pointers for readability
+ * 1.4 31 Mar 2002 - Simplify construct() code set check
+ * - Fix some comments
+ * - Add FIXLCODES #define
+ * 1.5 6 Apr 2002 - Minor comment fixes
+ * 1.6 7 Aug 2002 - Minor format changes
+ * 1.7 3 Mar 2003 - Added test code for distribution
+ * - Added zlib-like license
+ * 1.8 9 Jan 2004 - Added some comments on no distance codes case
+ */
+
+#include <setjmp.h> /* for setjmp(), longjmp(), and jmp_buf */
+#include "puff.h" /* prototype for puff() */
+
+#define local static /* for local function definitions */
+#define NIL ((unsigned char *)0) /* for no output option */
+
+/*
+ * Maximums for allocations and loops. It is not useful to change these --
+ * they are fixed by the deflate format.
+ */
+#define MAXBITS 15 /* maximum bits in a code */
+#define MAXLCODES 286 /* maximum number of literal/length codes */
+#define MAXDCODES 30 /* maximum number of distance codes */
+#define MAXCODES (MAXLCODES+MAXDCODES) /* maximum codes lengths to read */
+#define FIXLCODES 288 /* number of fixed literal/length codes */
+
+/* input and output state */
+struct state {
+ /* output state */
+ unsigned char *out; /* output buffer */
+ unsigned long outlen; /* available space at out */
+ unsigned long outcnt; /* bytes written to out so far */
+
+ /* input state */
+ unsigned char *in; /* input buffer */
+ unsigned long inlen; /* available input at in */
+ unsigned long incnt; /* bytes read so far */
+ int bitbuf; /* bit buffer */
+ int bitcnt; /* number of bits in bit buffer */
+
+ /* input limit error return state for bits() and decode() */
+ jmp_buf env;
+};
+
+/*
+ * Return need bits from the input stream. This always leaves less than
+ * eight bits in the buffer. bits() works properly for need == 0.
+ *
+ * Format notes:
+ *
+ * - Bits are stored in bytes from the least significant bit to the most
+ * significant bit. Therefore bits are dropped from the bottom of the bit
+ * buffer, using shift right, and new bytes are appended to the top of the
+ * bit buffer, using shift left.
+ */
+local int bits(struct state *s, int need)
+{
+ long val; /* bit accumulator (can use up to 20 bits) */
+
+ /* load at least need bits into val */
+ val = s->bitbuf;
+ while (s->bitcnt < need) {
+ if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
+ val |= (long)(s->in[s->incnt++]) << s->bitcnt; /* load eight bits */
+ s->bitcnt += 8;
+ }
+
+ /* drop need bits and update buffer, always zero to seven bits left */
+ s->bitbuf = (int)(val >> need);
+ s->bitcnt -= need;
+
+ /* return need bits, zeroing the bits above that */
+ return (int)(val & ((1L << need) - 1));
+}
+
+/*
+ * Process a stored block.
+ *
+ * Format notes:
+ *
+ * - After the two-bit stored block type (00), the stored block length and
+ * stored bytes are byte-aligned for fast copying. Therefore any leftover
+ * bits in the byte that has the last bit of the type, as many as seven, are
+ * discarded. The value of the discarded bits are not defined and should not
+ * be checked against any expectation.
+ *
+ * - The second inverted copy of the stored block length does not have to be
+ * checked, but it's probably a good idea to do so anyway.
+ *
+ * - A stored block can have zero length. This is sometimes used to byte-align
+ * subsets of the compressed data for random access or partial recovery.
+ */
+local int stored(struct state *s)
+{
+ unsigned len; /* length of stored block */
+
+ /* discard leftover bits from current byte (assumes s->bitcnt < 8) */
+ s->bitbuf = 0;
+ s->bitcnt = 0;
+
+ /* get length and check against its one's complement */
+ if (s->incnt + 4 > s->inlen) return 2; /* not enough input */
+ len = s->in[s->incnt++];
+ len |= s->in[s->incnt++] << 8;
+ if (s->in[s->incnt++] != (~len & 0xff) ||
+ s->in[s->incnt++] != ((~len >> 8) & 0xff))
+ return -2; /* didn't match complement! */
+
+ /* copy len bytes from in to out */
+ if (s->incnt + len > s->inlen) return 2; /* not enough input */
+ if (s->out != NIL) {
+ if (s->outcnt + len > s->outlen)
+ return 1; /* not enough output space */
+ while (len--)
+ s->out[s->outcnt++] = s->in[s->incnt++];
+ }
+ else { /* just scanning */
+ s->outcnt += len;
+ s->incnt += len;
+ }
+
+ /* done with a valid stored block */
+ return 0;
+}
+
+/*
+ * Huffman code decoding tables. count[1..MAXBITS] is the number of symbols of
+ * each length, which for a canonical code are stepped through in order.
+ * symbol[] are the symbol values in canonical order, where the number of
+ * entries is the sum of the counts in count[]. The decoding process can be
+ * seen in the function decode() below.
+ */
+struct huffman {
+ short *count; /* number of symbols of each length */
+ short *symbol; /* canonically ordered symbols */
+};
+
+/*
+ * Decode a code from the stream s using huffman table h. Return the symbol or
+ * a negative value if there is an error. If all of the lengths are zero, i.e.
+ * an empty code, or if the code is incomplete and an invalid code is received,
+ * then -9 is returned after reading MAXBITS bits.
+ *
+ * Format notes:
+ *
+ * - The codes as stored in the compressed data are bit-reversed relative to
+ * a simple integer ordering of codes of the same lengths. Hence below the
+ * bits are pulled from the compressed data one at a time and used to
+ * build the code value reversed from what is in the stream in order to
+ * permit simple integer comparisons for decoding. A table-based decoding
+ * scheme (as used in zlib) does not need to do this reversal.
+ *
+ * - The first code for the shortest length is all zeros. Subsequent codes of
+ * the same length are simply integer increments of the previous code. When
+ * moving up a length, a zero bit is appended to the code. For a complete
+ * code, the last code of the longest length will be all ones.
+ *
+ * - Incomplete codes are handled by this decoder, since they are permitted
+ * in the deflate format. See the format notes for fixed() and dynamic().
+ */
+#ifdef SLOW
+local int decode(struct state *s, struct huffman *h)
+{
+ int len; /* current number of bits in code */
+ int code; /* len bits being decoded */
+ int first; /* first code of length len */
+ int count; /* number of codes of length len */
+ int index; /* index of first code of length len in symbol table */
+
+ code = first = index = 0;
+ for (len = 1; len <= MAXBITS; len++) {
+ code |= bits(s, 1); /* get next bit */
+ count = h->count[len];
+ if (code < first + count) /* if length len, return symbol */
+ return h->symbol[index + (code - first)];
+ index += count; /* else update for next length */
+ first += count;
+ first <<= 1;
+ code <<= 1;
+ }
+ return -9; /* ran out of codes */
+}
+
+/*
+ * A faster version of decode() for real applications of this code. It's not
+ * as readable, but it makes puff() twice as fast. And it only makes the code
+ * a few percent larger.
+ */
+#else /* !SLOW */
+local int decode(struct state *s, struct huffman *h)
+{
+ int len; /* current number of bits in code */
+ int code; /* len bits being decoded */
+ int first; /* first code of length len */
+ int count; /* number of codes of length len */
+ int index; /* index of first code of length len in symbol table */
+ int bitbuf; /* bits from stream */
+ int left; /* bits left in next or left to process */
+ short *next; /* next number of codes */
+
+ bitbuf = s->bitbuf;
+ left = s->bitcnt;
+ code = first = index = 0;
+ len = 1;
+ next = h->count + 1;
+ while (1) {
+ while (left--) {
+ code |= bitbuf & 1;
+ bitbuf >>= 1;
+ count = *next++;
+ if (code < first + count) { /* if length len, return symbol */
+ s->bitbuf = bitbuf;
+ s->bitcnt = (s->bitcnt - len) & 7;
+ return h->symbol[index + (code - first)];
+ }
+ index += count; /* else update for next length */
+ first += count;
+ first <<= 1;
+ code <<= 1;
+ len++;
+ }
+ left = (MAXBITS+1) - len;
+ if (left == 0) break;
+ if (s->incnt == s->inlen) longjmp(s->env, 1); /* out of input */
+ bitbuf = s->in[s->incnt++];
+ if (left > 8) left = 8;
+ }
+ return -9; /* ran out of codes */
+}
+#endif /* SLOW */
+
+/*
+ * Given the list of code lengths length[0..n-1] representing a canonical
+ * Huffman code for n symbols, construct the tables required to decode those
+ * codes. Those tables are the number of codes of each length, and the symbols
+ * sorted by length, retaining their original order within each length. The
+ * return value is zero for a complete code set, negative for an over-
+ * subscribed code set, and positive for an incomplete code set. The tables
+ * can be used if the return value is zero or positive, but they cannot be used
+ * if the return value is negative. If the return value is zero, it is not
+ * possible for decode() using that table to return an error--any stream of
+ * enough bits will resolve to a symbol. If the return value is positive, then
+ * it is possible for decode() using that table to return an error for received
+ * codes past the end of the incomplete lengths.
+ *
+ * Not used by decode(), but used for error checking, h->count[0] is the number
+ * of the n symbols not in the code. So n - h->count[0] is the number of
+ * codes. This is useful for checking for incomplete codes that have more than
+ * one symbol, which is an error in a dynamic block.
+ *
+ * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS
+ * This is assured by the construction of the length arrays in dynamic() and
+ * fixed() and is not verified by construct().
+ *
+ * Format notes:
+ *
+ * - Permitted and expected examples of incomplete codes are one of the fixed
+ * codes and any code with a single symbol which in deflate is coded as one
+ * bit instead of zero bits. See the format notes for fixed() and dynamic().
+ *
+ * - Within a given code length, the symbols are kept in ascending order for
+ * the code bits definition.
+ */
+local int construct(struct huffman *h, short *length, int n)
+{
+ int symbol; /* current symbol when stepping through length[] */
+ int len; /* current length when stepping through h->count[] */
+ int left; /* number of possible codes left of current length */
+ short offs[MAXBITS+1]; /* offsets in symbol table for each length */
+
+ /* count number of codes of each length */
+ for (len = 0; len <= MAXBITS; len++)
+ h->count[len] = 0;
+ for (symbol = 0; symbol < n; symbol++)
+ (h->count[length[symbol]])++; /* assumes lengths are within bounds */
+ if (h->count[0] == n) /* no codes! */
+ return 0; /* complete, but decode() will fail */
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1; /* one possible code of zero length */
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1; /* one more bit, double codes left */
+ left -= h->count[len]; /* deduct count from possible codes */
+ if (left < 0) return left; /* over-subscribed--return negative */
+ } /* left > 0 means incomplete */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + h->count[len];
+
+ /*
+ * put symbols in table sorted by length, by symbol order within each
+ * length
+ */
+ for (symbol = 0; symbol < n; symbol++)
+ if (length[symbol] != 0)
+ h->symbol[offs[length[symbol]]++] = symbol;
+
+ /* return zero for complete set, positive for incomplete set */
+ return left;
+}
+
+/*
+ * Decode literal/length and distance codes until an end-of-block code.
+ *
+ * Format notes:
+ *
+ * - Compressed data that is after the block type if fixed or after the code
+ * description if dynamic is a combination of literals and length/distance
+ * pairs terminated by and end-of-block code. Literals are simply Huffman
+ * coded bytes. A length/distance pair is a coded length followed by a
+ * coded distance to represent a string that occurs earlier in the
+ * uncompressed data that occurs again at the current location.
+ *
+ * - Literals, lengths, and the end-of-block code are combined into a single
+ * code of up to 286 symbols. They are 256 literals (0..255), 29 length
+ * symbols (257..285), and the end-of-block symbol (256).
+ *
+ * - There are 256 possible lengths (3..258), and so 29 symbols are not enough
+ * to represent all of those. Lengths 3..10 and 258 are in fact represented
+ * by just a length symbol. Lengths 11..257 are represented as a symbol and
+ * some number of extra bits that are added as an integer to the base length
+ * of the length symbol. The number of extra bits is determined by the base
+ * length symbol. These are in the static arrays below, lens[] for the base
+ * lengths and lext[] for the corresponding number of extra bits.
+ *
+ * - The reason that 258 gets its own symbol is that the longest length is used
+ * often in highly redundant files. Note that 258 can also be coded as the
+ * base value 227 plus the maximum extra value of 31. While a good deflate
+ * should never do this, it is not an error, and should be decoded properly.
+ *
+ * - If a length is decoded, including its extra bits if any, then it is
+ * followed a distance code. There are up to 30 distance symbols. Again
+ * there are many more possible distances (1..32768), so extra bits are added
+ * to a base value represented by the symbol. The distances 1..4 get their
+ * own symbol, but the rest require extra bits. The base distances and
+ * corresponding number of extra bits are below in the static arrays dist[]
+ * and dext[].
+ *
+ * - Literal bytes are simply written to the output. A length/distance pair is
+ * an instruction to copy previously uncompressed bytes to the output. The
+ * copy is from distance bytes back in the output stream, copying for length
+ * bytes.
+ *
+ * - Distances pointing before the beginning of the output data are not
+ * permitted.
+ *
+ * - Overlapped copies, where the length is greater than the distance, are
+ * allowed and common. For example, a distance of one and a length of 258
+ * simply copies the last byte 258 times. A distance of four and a length of
+ * twelve copies the last four bytes three times. A simple forward copy
+ * ignoring whether the length is greater than the distance or not implements
+ * this correctly. You should not use memcpy() since its behavior is not
+ * defined for overlapped arrays. You should not use memmove() or bcopy()
+ * since though their behavior -is- defined for overlapping arrays, it is
+ * defined to do the wrong thing in this case.
+ */
+local int codes(struct state *s,
+ struct huffman *lencode,
+ struct huffman *distcode)
+{
+ int symbol; /* decoded symbol */
+ int len; /* length for copy */
+ unsigned dist; /* distance for copy */
+ static const short lens[29] = { /* Size base for length codes 257..285 */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
+ static const short lext[29] = { /* Extra bits for length codes 257..285 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0};
+ static const short dists[30] = { /* Offset base for distance codes 0..29 */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577};
+ static const short dext[30] = { /* Extra bits for distance codes 0..29 */
+ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+ 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+ 12, 12, 13, 13};
+
+ /* decode literals and length/distance pairs */
+ do {
+ symbol = decode(s, lencode);
+ if (symbol < 0) return symbol; /* invalid symbol */
+ if (symbol < 256) { /* literal: symbol is the byte */
+ /* write out the literal */
+ if (s->out != NIL) {
+ if (s->outcnt == s->outlen) return 1;
+ s->out[s->outcnt] = symbol;
+ }
+ s->outcnt++;
+ }
+ else if (symbol > 256) { /* length */
+ /* get and compute length */
+ symbol -= 257;
+ if (symbol >= 29) return -9; /* invalid fixed code */
+ len = lens[symbol] + bits(s, lext[symbol]);
+
+ /* get and check distance */
+ symbol = decode(s, distcode);
+ if (symbol < 0) return symbol; /* invalid symbol */
+ dist = dists[symbol] + bits(s, dext[symbol]);
+ if (dist > s->outcnt)
+ return -10; /* distance too far back */
+
+ /* copy length bytes from distance bytes back */
+ if (s->out != NIL) {
+ if (s->outcnt + len > s->outlen) return 1;
+ while (len--) {
+ s->out[s->outcnt] = s->out[s->outcnt - dist];
+ s->outcnt++;
+ }
+ }
+ else
+ s->outcnt += len;
+ }
+ } while (symbol != 256); /* end of block symbol */
+
+ /* done with a valid fixed or dynamic block */
+ return 0;
+}
+
+/*
+ * Process a fixed codes block.
+ *
+ * Format notes:
+ *
+ * - This block type can be useful for compressing small amounts of data for
+ * which the size of the code descriptions in a dynamic block exceeds the
+ * benefit of custom codes for that block. For fixed codes, no bits are
+ * spent on code descriptions. Instead the code lengths for literal/length
+ * codes and distance codes are fixed. The specific lengths for each symbol
+ * can be seen in the "for" loops below.
+ *
+ * - The literal/length code is complete, but has two symbols that are invalid
+ * and should result in an error if received. This cannot be implemented
+ * simply as an incomplete code since those two symbols are in the "middle"
+ * of the code. They are eight bits long and the longest literal/length\
+ * code is nine bits. Therefore the code must be constructed with those
+ * symbols, and the invalid symbols must be detected after decoding.
+ *
+ * - The fixed distance codes also have two invalid symbols that should result
+ * in an error if received. Since all of the distance codes are the same
+ * length, this can be implemented as an incomplete code. Then the invalid
+ * codes are detected while decoding.
+ */
+local int fixed(struct state *s)
+{
+ static int virgin = 1;
+ static short lencnt[MAXBITS+1], lensym[FIXLCODES];
+ static short distcnt[MAXBITS+1], distsym[MAXDCODES];
+ static struct huffman lencode = {lencnt, lensym};
+ static struct huffman distcode = {distcnt, distsym};
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ int symbol;
+ short lengths[FIXLCODES];
+
+ /* literal/length table */
+ for (symbol = 0; symbol < 144; symbol++)
+ lengths[symbol] = 8;
+ for (; symbol < 256; symbol++)
+ lengths[symbol] = 9;
+ for (; symbol < 280; symbol++)
+ lengths[symbol] = 7;
+ for (; symbol < FIXLCODES; symbol++)
+ lengths[symbol] = 8;
+ construct(&lencode, lengths, FIXLCODES);
+
+ /* distance table */
+ for (symbol = 0; symbol < MAXDCODES; symbol++)
+ lengths[symbol] = 5;
+ construct(&distcode, lengths, MAXDCODES);
+
+ /* do this just once */
+ virgin = 0;
+ }
+
+ /* decode data until end-of-block code */
+ return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Process a dynamic codes block.
+ *
+ * Format notes:
+ *
+ * - A dynamic block starts with a description of the literal/length and
+ * distance codes for that block. New dynamic blocks allow the compressor to
+ * rapidly adapt to changing data with new codes optimized for that data.
+ *
+ * - The codes used by the deflate format are "canonical", which means that
+ * the actual bits of the codes are generated in an unambiguous way simply
+ * from the number of bits in each code. Therefore the code descriptions
+ * are simply a list of code lengths for each symbol.
+ *
+ * - The code lengths are stored in order for the symbols, so lengths are
+ * provided for each of the literal/length symbols, and for each of the
+ * distance symbols.
+ *
+ * - If a symbol is not used in the block, this is represented by a zero as
+ * as the code length. This does not mean a zero-length code, but rather
+ * that no code should be created for this symbol. There is no way in the
+ * deflate format to represent a zero-length code.
+ *
+ * - The maximum number of bits in a code is 15, so the possible lengths for
+ * any code are 1..15.
+ *
+ * - The fact that a length of zero is not permitted for a code has an
+ * interesting consequence. Normally if only one symbol is used for a given
+ * code, then in fact that code could be represented with zero bits. However
+ * in deflate, that code has to be at least one bit. So for example, if
+ * only a single distance base symbol appears in a block, then it will be
+ * represented by a single code of length one, in particular one 0 bit. This
+ * is an incomplete code, since if a 1 bit is received, it has no meaning,
+ * and should result in an error. So incomplete distance codes of one symbol
+ * should be permitted, and the receipt of invalid codes should be handled.
+ *
+ * - It is also possible to have a single literal/length code, but that code
+ * must be the end-of-block code, since every dynamic block has one. This
+ * is not the most efficient way to create an empty block (an empty fixed
+ * block is fewer bits), but it is allowed by the format. So incomplete
+ * literal/length codes of one symbol should also be permitted.
+ *
+ * - If there are only literal codes and no lengths, then there are no distance
+ * codes. This is represented by one distance code with zero bits.
+ *
+ * - The list of up to 286 length/literal lengths and up to 30 distance lengths
+ * are themselves compressed using Huffman codes and run-length encoding. In
+ * the list of code lengths, a 0 symbol means no code, a 1..15 symbol means
+ * that length, and the symbols 16, 17, and 18 are run-length instructions.
+ * Each of 16, 17, and 18 are follwed by extra bits to define the length of
+ * the run. 16 copies the last length 3 to 6 times. 17 represents 3 to 10
+ * zero lengths, and 18 represents 11 to 138 zero lengths. Unused symbols
+ * are common, hence the special coding for zero lengths.
+ *
+ * - The symbols for 0..18 are Huffman coded, and so that code must be
+ * described first. This is simply a sequence of up to 19 three-bit values
+ * representing no code (0) or the code length for that symbol (1..7).
+ *
+ * - A dynamic block starts with three fixed-size counts from which is computed
+ * the number of literal/length code lengths, the number of distance code
+ * lengths, and the number of code length code lengths (ok, you come up with
+ * a better name!) in the code descriptions. For the literal/length and
+ * distance codes, lengths after those provided are considered zero, i.e. no
+ * code. The code length code lengths are received in a permuted order (see
+ * the order[] array below) to make a short code length code length list more
+ * likely. As it turns out, very short and very long codes are less likely
+ * to be seen in a dynamic code description, hence what may appear initially
+ * to be a peculiar ordering.
+ *
+ * - Given the number of literal/length code lengths (nlen) and distance code
+ * lengths (ndist), then they are treated as one long list of nlen + ndist
+ * code lengths. Therefore run-length coding can and often does cross the
+ * boundary between the two sets of lengths.
+ *
+ * - So to summarize, the code description at the start of a dynamic block is
+ * three counts for the number of code lengths for the literal/length codes,
+ * the distance codes, and the code length codes. This is followed by the
+ * code length code lengths, three bits each. This is used to construct the
+ * code length code which is used to read the remainder of the lengths. Then
+ * the literal/length code lengths and distance lengths are read as a single
+ * set of lengths using the code length codes. Codes are constructed from
+ * the resulting two sets of lengths, and then finally you can start
+ * decoding actual compressed data in the block.
+ *
+ * - For reference, a "typical" size for the code description in a dynamic
+ * block is around 80 bytes.
+ */
+local int dynamic(struct state *s)
+{
+ int nlen, ndist, ncode; /* number of lengths in descriptor */
+ int index; /* index of lengths[] */
+ int err; /* construct() return value */
+ short lengths[MAXCODES]; /* descriptor code lengths */
+ short lencnt[MAXBITS+1], lensym[MAXLCODES]; /* lencode memory */
+ short distcnt[MAXBITS+1], distsym[MAXDCODES]; /* distcode memory */
+ struct huffman lencode = {lencnt, lensym}; /* length code */
+ struct huffman distcode = {distcnt, distsym}; /* distance code */
+ static const short order[19] = /* permutation of code length codes */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* get number of lengths in each table, check lengths */
+ nlen = bits(s, 5) + 257;
+ ndist = bits(s, 5) + 1;
+ ncode = bits(s, 4) + 4;
+ if (nlen > MAXLCODES || ndist > MAXDCODES)
+ return -3; /* bad counts */
+
+ /* read code length code lengths (really), missing lengths are zero */
+ for (index = 0; index < ncode; index++)
+ lengths[order[index]] = bits(s, 3);
+ for (; index < 19; index++)
+ lengths[order[index]] = 0;
+
+ /* build huffman table for code lengths codes (use lencode temporarily) */
+ err = construct(&lencode, lengths, 19);
+ if (err != 0) return -4; /* require complete code set here */
+
+ /* read length/literal and distance code length tables */
+ index = 0;
+ while (index < nlen + ndist) {
+ int symbol; /* decoded value */
+ int len; /* last length to repeat */
+
+ symbol = decode(s, &lencode);
+ if (symbol < 16) /* length in 0..15 */
+ lengths[index++] = symbol;
+ else { /* repeat instruction */
+ len = 0; /* assume repeating zeros */
+ if (symbol == 16) { /* repeat last length 3..6 times */
+ if (index == 0) return -5; /* no last length! */
+ len = lengths[index - 1]; /* last length */
+ symbol = 3 + bits(s, 2);
+ }
+ else if (symbol == 17) /* repeat zero 3..10 times */
+ symbol = 3 + bits(s, 3);
+ else /* == 18, repeat zero 11..138 times */
+ symbol = 11 + bits(s, 7);
+ if (index + symbol > nlen + ndist)
+ return -6; /* too many lengths! */
+ while (symbol--) /* repeat last or zero symbol times */
+ lengths[index++] = len;
+ }
+ }
+
+ /* build huffman table for literal/length codes */
+ err = construct(&lencode, lengths, nlen);
+ if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
+ return -7; /* only allow incomplete codes if just one code */
+
+ /* build huffman table for distance codes */
+ err = construct(&distcode, lengths + nlen, ndist);
+ if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
+ return -8; /* only allow incomplete codes if just one code */
+
+ /* decode data until end-of-block code */
+ return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Inflate source to dest. On return, destlen and sourcelen are updated to the
+ * size of the uncompressed data and the size of the deflate data respectively.
+ * On success, the return value of puff() is zero. If there is an error in the
+ * source data, i.e. it is not in the deflate format, then a negative value is
+ * returned. If there is not enough input available or there is not enough
+ * output space, then a positive error is returned. In that case, destlen and
+ * sourcelen are not updated to facilitate retrying from the beginning with the
+ * provision of more input data or more output space. In the case of invalid
+ * inflate data (a negative error), the dest and source pointers are updated to
+ * facilitate the debugging of deflators.
+ *
+ * puff() also has a mode to determine the size of the uncompressed output with
+ * no output written. For this dest must be (unsigned char *)0. In this case,
+ * the input value of *destlen is ignored, and on return *destlen is set to the
+ * size of the uncompressed output.
+ *
+ * The return codes are:
+ *
+ * 2: available inflate data did not terminate
+ * 1: output space exhausted before completing inflate
+ * 0: successful inflate
+ * -1: invalid block type (type == 3)
+ * -2: stored block length did not match one's complement
+ * -3: dynamic block code description: too many length or distance codes
+ * -4: dynamic block code description: code lengths codes incomplete
+ * -5: dynamic block code description: repeat lengths with no first length
+ * -6: dynamic block code description: repeat more than specified lengths
+ * -7: dynamic block code description: invalid literal/length code lengths
+ * -8: dynamic block code description: invalid distance code lengths
+ * -9: invalid literal/length or distance code in fixed or dynamic block
+ * -10: distance is too far back in fixed or dynamic block
+ *
+ * Format notes:
+ *
+ * - Three bits are read for each block to determine the kind of block and
+ * whether or not it is the last block. Then the block is decoded and the
+ * process repeated if it was not the last block.
+ *
+ * - The leftover bits in the last byte of the deflate data after the last
+ * block (if it was a fixed or dynamic block) are undefined and have no
+ * expected values to check.
+ */
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen) /* amount of input available */
+{
+ struct state s; /* input/output state */
+ int last, type; /* block information */
+ int err; /* return value */
+
+ /* initialize output state */
+ s.out = dest;
+ s.outlen = *destlen; /* ignored if dest is NIL */
+ s.outcnt = 0;
+
+ /* initialize input state */
+ s.in = source;
+ s.inlen = *sourcelen;
+ s.incnt = 0;
+ s.bitbuf = 0;
+ s.bitcnt = 0;
+
+ /* return if bits() or decode() tries to read past available input */
+ if (setjmp(s.env) != 0) /* if came back here via longjmp() */
+ err = 2; /* then skip do-loop, return error */
+ else {
+ /* process blocks until last block or error */
+ do {
+ last = bits(&s, 1); /* one if last block */
+ type = bits(&s, 2); /* block type 0..3 */
+ err = type == 0 ? stored(&s) :
+ (type == 1 ? fixed(&s) :
+ (type == 2 ? dynamic(&s) :
+ -1)); /* type == 3, invalid */
+ if (err != 0) break; /* return with error */
+ } while (!last);
+ }
+
+ /* update the lengths and return */
+ if (err <= 0) {
+ *destlen = s.outcnt;
+ *sourcelen = s.incnt;
+ }
+ return err;
+}
+
+#ifdef TEST
+/* Example of how to use puff() */
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+local unsigned char *yank(char *name, unsigned long *len)
+{
+ unsigned long size;
+ unsigned char *buf;
+ FILE *in;
+ struct stat s;
+
+ *len = 0;
+ if (stat(name, &s)) return NULL;
+ if ((s.st_mode & S_IFMT) != S_IFREG) return NULL;
+ size = (unsigned long)(s.st_size);
+ if (size == 0 || (off_t)size != s.st_size) return NULL;
+ in = fopen(name, "r");
+ if (in == NULL) return NULL;
+ buf = malloc(size);
+ if (buf != NULL && fread(buf, 1, size, in) != size) {
+ free(buf);
+ buf = NULL;
+ }
+ fclose(in);
+ *len = size;
+ return buf;
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+ unsigned char *source;
+ unsigned long len, sourcelen, destlen;
+
+ if (argc < 2) return 2;
+ source = yank(argv[1], &len);
+ if (source == NULL) return 2;
+ sourcelen = len;
+ ret = puff(NIL, &destlen, source, &sourcelen);
+ if (ret)
+ printf("puff() failed with return code %d\n", ret);
+ else {
+ printf("puff() succeeded uncompressing %lu bytes\n", destlen);
+ if (sourcelen < len) printf("%lu compressed bytes unused\n",
+ len - sourcelen);
+ }
+ free(source);
+ return ret;
+}
+#endif
Added: llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.h (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/puff/puff.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,31 @@
+/* puff.h
+ Copyright (C) 2002, 2003 Mark Adler, all rights reserved
+ version 1.7, 3 Mar 2002
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler at alumni.caltech.edu
+ */
+
+
+/*
+ * See puff.c for purpose and usage.
+ */
+int puff(unsigned char *dest, /* pointer to destination pointer */
+ unsigned long *destlen, /* amount of output space */
+ unsigned char *source, /* pointer to source data pointer */
+ unsigned long *sourcelen); /* amount of input available */
Added: llvm-gcc-4.2/trunk/zlib/contrib/puff/zeros.raw
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/puff/zeros.raw?rev=43913&view=auto
==============================================================================
Binary file - no diff available.
Propchange: llvm-gcc-4.2/trunk/zlib/contrib/puff/zeros.raw
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added: llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,275 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <windows.h>
+
+#include "zlib.h"
+
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+ R->HighPart = A.HighPart - B.HighPart;
+ if (A.LowPart >= B.LowPart)
+ R->LowPart = A.LowPart - B.LowPart;
+ else
+ {
+ R->LowPart = A.LowPart - B.LowPart;
+ R->HighPart --;
+ }
+}
+
+#ifdef _M_X64
+// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc
+unsigned __int64 __rdtsc(void);
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ // printf("rdtsc = %I64x\n",__rdtsc());
+ pbeginTime64->QuadPart=__rdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER LIres;
+ unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+ LIres.QuadPart=res;
+ // printf("rdtsc = %I64x\n",__rdtsc());
+ return LIres;
+}
+#else
+#ifdef _M_IX86
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+ DWORD dwEdx,dwEax;
+ _asm
+ {
+ rdtsc
+ mov dwEax,eax
+ mov dwEdx,edx
+ }
+ pbeginTime64->LowPart=dwEax;
+ pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER LIres,endTime64;
+ myGetRDTSC32(&endTime64);
+
+ LIres.LowPart=LIres.HighPart=0;
+ MyDoMinus64(&LIres,endTime64,beginTime64);
+ return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER lr;
+ lr.QuadPart=0;
+ return lr;
+}
+#endif
+#endif
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+ if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+ {
+ pbeginTime64->LowPart = GetTickCount();
+ pbeginTime64->HighPart = 0;
+ }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+ LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+ DWORDLONG ticksShifted,tickSecShifted;
+ DWORD dwLog=16+0;
+ DWORD dwRet;
+ if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+ dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+ else
+ {
+ MyDoMinus64(&ticks,endTime64,beginTime64);
+ QueryPerformanceFrequency(&ticksPerSecond);
+
+
+ {
+ ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+ tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+
+ }
+
+ dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+ dwRet *=1;
+ }
+ return dwRet;
+}
+
+int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
+{
+ FILE* stream;
+ void* ptr;
+ int retVal=1;
+ stream=fopen(filename, "rb");
+ if (stream==NULL)
+ return 0;
+
+ fseek(stream,0,SEEK_END);
+
+ *plFileSize=ftell(stream);
+ fseek(stream,0,SEEK_SET);
+ ptr=malloc((*plFileSize)+1);
+ if (ptr==NULL)
+ retVal=0;
+ else
+ {
+ if (fread(ptr, 1, *plFileSize,stream) != (*plFileSize))
+ retVal=0;
+ }
+ fclose(stream);
+ *pFilePtr=ptr;
+ return retVal;
+}
+
+int main(int argc, char *argv[])
+{
+ int BlockSizeCompress=0x8000;
+ int BlockSizeUncompress=0x8000;
+ int cprLevel=Z_DEFAULT_COMPRESSION ;
+ long lFileSize;
+ unsigned char* FilePtr;
+ long lBufferSizeCpr;
+ long lBufferSizeUncpr;
+ long lCompressedSize=0;
+ unsigned char* CprPtr;
+ unsigned char* UncprPtr;
+ long lSizeCpr,lSizeUncpr;
+ DWORD dwGetTick,dwMsecQP;
+ LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
+
+ if (argc<=1)
+ {
+ printf("run TestZlib <File> [BlockSizeCompress] [BlockSizeUncompress] [compres. level]\n");
+ return 0;
+ }
+
+ if (ReadFileMemory(argv[1],&lFileSize,&FilePtr)==0)
+ {
+ printf("error reading %s\n",argv[1]);
+ return 1;
+ }
+ else printf("file %s read, %u bytes\n",argv[1],lFileSize);
+
+ if (argc>=3)
+ BlockSizeCompress=atol(argv[2]);
+
+ if (argc>=4)
+ BlockSizeUncompress=atol(argv[3]);
+
+ if (argc>=5)
+ cprLevel=(int)atol(argv[4]);
+
+ lBufferSizeCpr = lFileSize + (lFileSize/0x10) + 0x200;
+ lBufferSizeUncpr = lBufferSizeCpr;
+
+ CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
+
+ BeginCountPerfCounter(&li_qp,TRUE);
+ dwGetTick=GetTickCount();
+ BeginCountRdtsc(&li_rdtsc);
+ {
+ z_stream zcpr;
+ int ret=Z_OK;
+ long lOrigToDo = lFileSize;
+ long lOrigDone = 0;
+ int step=0;
+ memset(&zcpr,0,sizeof(z_stream));
+ deflateInit(&zcpr,cprLevel);
+
+ zcpr.next_in = FilePtr;
+ zcpr.next_out = CprPtr;
+
+
+ do
+ {
+ long all_read_before = zcpr.total_in;
+ zcpr.avail_in = min(lOrigToDo,BlockSizeCompress);
+ zcpr.avail_out = BlockSizeCompress;
+ ret=deflate(&zcpr,(zcpr.avail_in==lOrigToDo) ? Z_FINISH : Z_SYNC_FLUSH);
+ lOrigDone += (zcpr.total_in-all_read_before);
+ lOrigToDo -= (zcpr.total_in-all_read_before);
+ step++;
+ } while (ret==Z_OK);
+
+ lSizeCpr=zcpr.total_out;
+ deflateEnd(&zcpr);
+ dwGetTick=GetTickCount()-dwGetTick;
+ dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+ dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+ printf("total compress size = %u, in %u step\n",lSizeCpr,step);
+ printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+ printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+ printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+ }
+
+ CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+ UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+ BeginCountPerfCounter(&li_qp,TRUE);
+ dwGetTick=GetTickCount();
+ BeginCountRdtsc(&li_rdtsc);
+ {
+ z_stream zcpr;
+ int ret=Z_OK;
+ long lOrigToDo = lSizeCpr;
+ long lOrigDone = 0;
+ int step=0;
+ memset(&zcpr,0,sizeof(z_stream));
+ inflateInit(&zcpr);
+
+ zcpr.next_in = CprPtr;
+ zcpr.next_out = UncprPtr;
+
+
+ do
+ {
+ long all_read_before = zcpr.total_in;
+ zcpr.avail_in = min(lOrigToDo,BlockSizeUncompress);
+ zcpr.avail_out = BlockSizeUncompress;
+ ret=inflate(&zcpr,Z_SYNC_FLUSH);
+ lOrigDone += (zcpr.total_in-all_read_before);
+ lOrigToDo -= (zcpr.total_in-all_read_before);
+ step++;
+ } while (ret==Z_OK);
+
+ lSizeUncpr=zcpr.total_out;
+ inflateEnd(&zcpr);
+ dwGetTick=GetTickCount()-dwGetTick;
+ dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+ dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
+ printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
+ printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+ printf("uncpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+ printf("uncpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
+ }
+
+ if (lSizeUncpr==lFileSize)
+ {
+ if (memcmp(FilePtr,UncprPtr,lFileSize)==0)
+ printf("compare ok\n");
+
+ }
+
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.txt
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.txt?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.txt (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/testzlib/testzlib.txt Thu Nov 8 16:56:19 2007
@@ -0,0 +1,10 @@
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln
\ No newline at end of file
Added: llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile Thu Nov 8 16:56:19 2007
@@ -0,0 +1,14 @@
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o ../../libz.a
+ $(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+ $(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+ cd ../..; ./configure; make
+
+clean:
+ rm -f untgz untgz.o *~
Added: llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile.msc
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile.msc?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile.msc (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/untgz/Makefile.msc Thu Nov 8 16:56:19 2007
@@ -0,0 +1,17 @@
+CC=cl
+CFLAGS=-MD
+
+untgz.exe: untgz.obj ..\..\zlib.lib
+ $(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib
+
+untgz.obj: untgz.c ..\..\zlib.h
+ $(CC) $(CFLAGS) -c -I..\.. untgz.c
+
+..\..\zlib.lib:
+ cd ..\..
+ $(MAKE) -f win32\makefile.msc
+ cd contrib\untgz
+
+clean:
+ -del untgz.obj
+ -del untgz.exe
Added: llvm-gcc-4.2/trunk/zlib/contrib/untgz/untgz.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/untgz/untgz.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/untgz/untgz.c (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/untgz/untgz.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,674 @@
+/*
+ * untgz.c -- Display contents and extract files from a gzip'd TAR file
+ *
+ * written by Pedro A. Aranda Gutierrez <paag at tid.es>
+ * adaptation to Unix by Jean-loup Gailly <jloup at gzip.org>
+ * various fixes by Cosmin Truta <cosmint at cs.ubbcluj.ro>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+
+#include "zlib.h"
+
+#ifdef unix
+# include <unistd.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#ifdef WIN32
+#include <windows.h>
+# ifndef F_OK
+# define F_OK 0
+# endif
+# define mkdir(dirname,mode) _mkdir(dirname)
+# ifdef _MSC_VER
+# define access(path,mode) _access(path,mode)
+# define chmod(path,mode) _chmod(path,mode)
+# define strdup(str) _strdup(str)
+# endif
+#else
+# include <utime.h>
+#endif
+
+
+/* values used in typeflag field */
+
+#define REGTYPE '0' /* regular file */
+#define AREGTYPE '\0' /* regular file */
+#define LNKTYPE '1' /* link */
+#define SYMTYPE '2' /* reserved */
+#define CHRTYPE '3' /* character special */
+#define BLKTYPE '4' /* block special */
+#define DIRTYPE '5' /* directory */
+#define FIFOTYPE '6' /* FIFO special */
+#define CONTTYPE '7' /* reserved */
+
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR 'D' /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K' /* long link name */
+#define GNUTYPE_LONGNAME 'L' /* long file name */
+#define GNUTYPE_MULTIVOL 'M' /* continuation of file from another volume */
+#define GNUTYPE_NAMES 'N' /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE 'S' /* sparse file */
+#define GNUTYPE_VOLHDR 'V' /* tape/volume header */
+
+
+/* tar header */
+
+#define BLOCKSIZE 512
+#define SHORTNAMESIZE 100
+
+struct tar_header
+{ /* byte offset */
+ char name[100]; /* 0 */
+ char mode[8]; /* 100 */
+ char uid[8]; /* 108 */
+ char gid[8]; /* 116 */
+ char size[12]; /* 124 */
+ char mtime[12]; /* 136 */
+ char chksum[8]; /* 148 */
+ char typeflag; /* 156 */
+ char linkname[100]; /* 157 */
+ char magic[6]; /* 257 */
+ char version[2]; /* 263 */
+ char uname[32]; /* 265 */
+ char gname[32]; /* 297 */
+ char devmajor[8]; /* 329 */
+ char devminor[8]; /* 337 */
+ char prefix[155]; /* 345 */
+ /* 500 */
+};
+
+union tar_buffer
+{
+ char buffer[BLOCKSIZE];
+ struct tar_header header;
+};
+
+struct attr_item
+{
+ struct attr_item *next;
+ char *fname;
+ int mode;
+ time_t time;
+};
+
+enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
+
+char *TGZfname OF((const char *));
+void TGZnotfound OF((const char *));
+
+int getoct OF((char *, int));
+char *strtime OF((time_t *));
+int setfiletime OF((char *, time_t));
+void push_attr OF((struct attr_item **, char *, int, time_t));
+void restore_attr OF((struct attr_item **));
+
+int ExprMatch OF((char *, char *));
+
+int makedir OF((char *));
+int matchname OF((int, int, char **, char *));
+
+void error OF((const char *));
+int tar OF((gzFile, int, int, int, char **));
+
+void help OF((int));
+int main OF((int, char **));
+
+char *prog;
+
+const char *TGZsuffix[] = { "\0", ".tar", ".tar.gz", ".taz", ".tgz", NULL };
+
+/* return the file name of the TGZ archive */
+/* or NULL if it does not exist */
+
+char *TGZfname (const char *arcname)
+{
+ static char buffer[1024];
+ int origlen,i;
+
+ strcpy(buffer,arcname);
+ origlen = strlen(buffer);
+
+ for (i=0; TGZsuffix[i]; i++)
+ {
+ strcpy(buffer+origlen,TGZsuffix[i]);
+ if (access(buffer,F_OK) == 0)
+ return buffer;
+ }
+ return NULL;
+}
+
+
+/* error message for the filename */
+
+void TGZnotfound (const char *arcname)
+{
+ int i;
+
+ fprintf(stderr,"%s: Couldn't find ",prog);
+ for (i=0;TGZsuffix[i];i++)
+ fprintf(stderr,(TGZsuffix[i+1]) ? "%s%s, " : "or %s%s\n",
+ arcname,
+ TGZsuffix[i]);
+ exit(1);
+}
+
+
+/* convert octal digits to int */
+/* on error return -1 */
+
+int getoct (char *p,int width)
+{
+ int result = 0;
+ char c;
+
+ while (width--)
+ {
+ c = *p++;
+ if (c == 0)
+ break;
+ if (c == ' ')
+ continue;
+ if (c < '0' || c > '7')
+ return -1;
+ result = result * 8 + (c - '0');
+ }
+ return result;
+}
+
+
+/* convert time_t to string */
+/* use the "YYYY/MM/DD hh:mm:ss" format */
+
+char *strtime (time_t *t)
+{
+ struct tm *local;
+ static char result[32];
+
+ local = localtime(t);
+ sprintf(result,"%4d/%02d/%02d %02d:%02d:%02d",
+ local->tm_year+1900, local->tm_mon+1, local->tm_mday,
+ local->tm_hour, local->tm_min, local->tm_sec);
+ return result;
+}
+
+
+/* set file time */
+
+int setfiletime (char *fname,time_t ftime)
+{
+#ifdef WIN32
+ static int isWinNT = -1;
+ SYSTEMTIME st;
+ FILETIME locft, modft;
+ struct tm *loctm;
+ HANDLE hFile;
+ int result;
+
+ loctm = localtime(&ftime);
+ if (loctm == NULL)
+ return -1;
+
+ st.wYear = (WORD)loctm->tm_year + 1900;
+ st.wMonth = (WORD)loctm->tm_mon + 1;
+ st.wDayOfWeek = (WORD)loctm->tm_wday;
+ st.wDay = (WORD)loctm->tm_mday;
+ st.wHour = (WORD)loctm->tm_hour;
+ st.wMinute = (WORD)loctm->tm_min;
+ st.wSecond = (WORD)loctm->tm_sec;
+ st.wMilliseconds = 0;
+ if (!SystemTimeToFileTime(&st, &locft) ||
+ !LocalFileTimeToFileTime(&locft, &modft))
+ return -1;
+
+ if (isWinNT < 0)
+ isWinNT = (GetVersion() < 0x80000000) ? 1 : 0;
+ hFile = CreateFile(fname, GENERIC_WRITE, 0, NULL, OPEN_EXISTING,
+ (isWinNT ? FILE_FLAG_BACKUP_SEMANTICS : 0),
+ NULL);
+ if (hFile == INVALID_HANDLE_VALUE)
+ return -1;
+ result = SetFileTime(hFile, NULL, NULL, &modft) ? 0 : -1;
+ CloseHandle(hFile);
+ return result;
+#else
+ struct utimbuf settime;
+
+ settime.actime = settime.modtime = ftime;
+ return utime(fname,&settime);
+#endif
+}
+
+
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+ struct attr_item *item;
+
+ item = (struct attr_item *)malloc(sizeof(struct attr_item));
+ if (item == NULL)
+ error("Out of memory");
+ item->fname = strdup(fname);
+ item->mode = mode;
+ item->time = time;
+ item->next = *list;
+ *list = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+ struct attr_item *item, *prev;
+
+ for (item = *list; item != NULL; )
+ {
+ setfiletime(item->fname,item->time);
+ chmod(item->fname,item->mode);
+ prev = item;
+ item = item->next;
+ free(prev);
+ }
+ *list = NULL;
+}
+
+
+/* match regular expression */
+
+#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
+
+int ExprMatch (char *string,char *expr)
+{
+ while (1)
+ {
+ if (ISSPECIAL(*expr))
+ {
+ if (*expr == '/')
+ {
+ if (*string != '\\' && *string != '/')
+ return 0;
+ string ++; expr++;
+ }
+ else if (*expr == '*')
+ {
+ if (*expr ++ == 0)
+ return 1;
+ while (*++string != *expr)
+ if (*string == 0)
+ return 0;
+ }
+ }
+ else
+ {
+ if (*string != *expr)
+ return 0;
+ if (*expr++ == 0)
+ return 1;
+ string++;
+ }
+ }
+}
+
+
+/* recursive mkdir */
+/* abort on ENOENT; ignore other errors like "directory already exists" */
+/* return 1 if OK */
+/* 0 on error */
+
+int makedir (char *newdir)
+{
+ char *buffer = strdup(newdir);
+ char *p;
+ int len = strlen(buffer);
+
+ if (len <= 0) {
+ free(buffer);
+ return 0;
+ }
+ if (buffer[len-1] == '/') {
+ buffer[len-1] = '\0';
+ }
+ if (mkdir(buffer, 0755) == 0)
+ {
+ free(buffer);
+ return 1;
+ }
+
+ p = buffer+1;
+ while (1)
+ {
+ char hold;
+
+ while(*p && *p != '\\' && *p != '/')
+ p++;
+ hold = *p;
+ *p = 0;
+ if ((mkdir(buffer, 0755) == -1) && (errno == ENOENT))
+ {
+ fprintf(stderr,"%s: Couldn't create directory %s\n",prog,buffer);
+ free(buffer);
+ return 0;
+ }
+ if (hold == 0)
+ break;
+ *p++ = hold;
+ }
+ free(buffer);
+ return 1;
+}
+
+
+int matchname (int arg,int argc,char **argv,char *fname)
+{
+ if (arg == argc) /* no arguments given (untgz tgzarchive) */
+ return 1;
+
+ while (arg < argc)
+ if (ExprMatch(fname,argv[arg++]))
+ return 1;
+
+ return 0; /* ignore this for the moment being */
+}
+
+
+/* tar file list or extract */
+
+int tar (gzFile in,int action,int arg,int argc,char **argv)
+{
+ union tar_buffer buffer;
+ int len;
+ int err;
+ int getheader = 1;
+ int remaining = 0;
+ FILE *outfile = NULL;
+ char fname[BLOCKSIZE];
+ int tarmode;
+ time_t tartime;
+ struct attr_item *attributes = NULL;
+
+ if (action == TGZ_LIST)
+ printf(" date time size file\n"
+ " ---------- -------- --------- -------------------------------------\n");
+ while (1)
+ {
+ len = gzread(in, &buffer, BLOCKSIZE);
+ if (len < 0)
+ error(gzerror(in, &err));
+ /*
+ * Always expect complete blocks to process
+ * the tar information.
+ */
+ if (len != BLOCKSIZE)
+ {
+ action = TGZ_INVALID; /* force error exit */
+ remaining = 0; /* force I/O cleanup */
+ }
+
+ /*
+ * If we have to get a tar header
+ */
+ if (getheader >= 1)
+ {
+ /*
+ * if we met the end of the tar
+ * or the end-of-tar block,
+ * we are done
+ */
+ if (len == 0 || buffer.header.name[0] == 0)
+ break;
+
+ tarmode = getoct(buffer.header.mode,8);
+ tartime = (time_t)getoct(buffer.header.mtime,12);
+ if (tarmode == -1 || tartime == (time_t)-1)
+ {
+ buffer.header.name[0] = 0;
+ action = TGZ_INVALID;
+ }
+
+ if (getheader == 1)
+ {
+ strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+ if (fname[SHORTNAMESIZE-1] != 0)
+ fname[SHORTNAMESIZE] = 0;
+ }
+ else
+ {
+ /*
+ * The file name is longer than SHORTNAMESIZE
+ */
+ if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+ error("bad long name");
+ getheader = 1;
+ }
+
+ /*
+ * Act according to the type flag
+ */
+ switch (buffer.header.typeflag)
+ {
+ case DIRTYPE:
+ if (action == TGZ_LIST)
+ printf(" %s <dir> %s\n",strtime(&tartime),fname);
+ if (action == TGZ_EXTRACT)
+ {
+ makedir(fname);
+ push_attr(&attributes,fname,tarmode,tartime);
+ }
+ break;
+ case REGTYPE:
+ case AREGTYPE:
+ remaining = getoct(buffer.header.size,12);
+ if (remaining == -1)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ if (action == TGZ_LIST)
+ printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
+ else if (action == TGZ_EXTRACT)
+ {
+ if (matchname(arg,argc,argv,fname))
+ {
+ outfile = fopen(fname,"wb");
+ if (outfile == NULL) {
+ /* try creating directory */
+ char *p = strrchr(fname, '/');
+ if (p != NULL) {
+ *p = '\0';
+ makedir(fname);
+ *p = '/';
+ outfile = fopen(fname,"wb");
+ }
+ }
+ if (outfile != NULL)
+ printf("Extracting %s\n",fname);
+ else
+ fprintf(stderr, "%s: Couldn't create %s",prog,fname);
+ }
+ else
+ outfile = NULL;
+ }
+ getheader = 0;
+ break;
+ case GNUTYPE_LONGLINK:
+ case GNUTYPE_LONGNAME:
+ remaining = getoct(buffer.header.size,12);
+ if (remaining < 0 || remaining >= BLOCKSIZE)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ len = gzread(in, fname, BLOCKSIZE);
+ if (len < 0)
+ error(gzerror(in, &err));
+ if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+ {
+ action = TGZ_INVALID;
+ break;
+ }
+ getheader = 2;
+ break;
+ default:
+ if (action == TGZ_LIST)
+ printf(" %s <---> %s\n",strtime(&tartime),fname);
+ break;
+ }
+ }
+ else
+ {
+ unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
+
+ if (outfile != NULL)
+ {
+ if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
+ {
+ fprintf(stderr,
+ "%s: Error writing %s -- skipping\n",prog,fname);
+ fclose(outfile);
+ outfile = NULL;
+ remove(fname);
+ }
+ }
+ remaining -= bytes;
+ }
+
+ if (remaining == 0)
+ {
+ getheader = 1;
+ if (outfile != NULL)
+ {
+ fclose(outfile);
+ outfile = NULL;
+ if (action != TGZ_INVALID)
+ push_attr(&attributes,fname,tarmode,tartime);
+ }
+ }
+
+ /*
+ * Abandon if errors are found
+ */
+ if (action == TGZ_INVALID)
+ {
+ error("broken archive");
+ break;
+ }
+ }
+
+ /*
+ * Restore file modes and time stamps
+ */
+ restore_attr(&attributes);
+
+ if (gzclose(in) != Z_OK)
+ error("failed gzclose");
+
+ return 0;
+}
+
+
+/* ============================================================ */
+
+void help(int exitval)
+{
+ printf("untgz version 0.2.1\n"
+ " using zlib version %s\n\n",
+ zlibVersion());
+ printf("Usage: untgz file.tgz extract all files\n"
+ " untgz file.tgz fname ... extract selected files\n"
+ " untgz -l file.tgz list archive contents\n"
+ " untgz -h display this help\n");
+ exit(exitval);
+}
+
+void error(const char *msg)
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+
+/* ============================================================ */
+
+#if defined(WIN32) && defined(__GNUC__)
+int _CRT_glob = 0; /* disable argument globbing in MinGW */
+#endif
+
+int main(int argc,char **argv)
+{
+ int action = TGZ_EXTRACT;
+ int arg = 1;
+ char *TGZfile;
+ gzFile *f;
+
+ prog = strrchr(argv[0],'\\');
+ if (prog == NULL)
+ {
+ prog = strrchr(argv[0],'/');
+ if (prog == NULL)
+ {
+ prog = strrchr(argv[0],':');
+ if (prog == NULL)
+ prog = argv[0];
+ else
+ prog++;
+ }
+ else
+ prog++;
+ }
+ else
+ prog++;
+
+ if (argc == 1)
+ help(0);
+
+ if (strcmp(argv[arg],"-l") == 0)
+ {
+ action = TGZ_LIST;
+ if (argc == ++arg)
+ help(0);
+ }
+ else if (strcmp(argv[arg],"-h") == 0)
+ {
+ help(0);
+ }
+
+ if ((TGZfile = TGZfname(argv[arg])) == NULL)
+ TGZnotfound(argv[arg]);
+
+ ++arg;
+ if ((action == TGZ_LIST) && (arg != argc))
+ help(1);
+
+/*
+ * Process the TGZ file
+ */
+ switch(action)
+ {
+ case TGZ_LIST:
+ case TGZ_EXTRACT:
+ f = gzopen(TGZfile,"rb");
+ if (f == NULL)
+ {
+ fprintf(stderr,"%s: Couldn't gzopen %s\n",prog,TGZfile);
+ return 1;
+ }
+ exit(tar(f, action, arg, argc, argv));
+ break;
+
+ default:
+ error("Unknown option");
+ exit(1);
+ }
+
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/readme.txt
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/readme.txt?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/readme.txt (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/readme.txt Thu Nov 8 16:56:19 2007
@@ -0,0 +1,73 @@
+Building instructions for the DLL versions of Zlib 1.2.3
+========================================================
+
+This directory contains projects that build zlib and minizip using
+Microsoft Visual C++ 7.0/7.1, and Visual C++ .
+
+You don't need to build these projects yourself. You can download the
+binaries from:
+ http://www.winimage.com/zLibDll
+
+More information can be found at this site.
+
+
+Build instructions for Visual Studio 7.x (32 bits)
+--------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- Download the crtdll library from
+ http://www.winimage.com/zLibDll/crtdll.zip
+ Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc7.
+- Open contrib\vstudio\vc7\zlibvc.sln with Microsoft Visual C++ 7.x
+ (Visual Studio .Net 2002 or 2003).
+
+Build instructions for Visual Studio 2005 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- For 32 bits only: download the crtdll library from
+ http://www.winimage.com/zLibDll/crtdll.zip
+ Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc8.
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+
+Build instructions for Visual Studio 2005 64 bits, PSDK compiler
+----------------------------------------------------------------
+at the time of writing this text file, Visual Studio 2005 (and
+ Microsoft Visual C++ 8.0) is on the beta 2 stage.
+Using you can get the free 64 bits compiler from Platform SDK,
+ which is NOT a beta, and compile using the Visual studio 2005 IDE
+see http://www.winimage.com/misc/sdk64onvs2005/ for instruction
+
+- Uncompress current zlib, including all contrib/* files
+- start Visual Studio 2005 from a platform SDK command prompt, using
+ the /useenv switch
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+
+
+Important
+---------
+- To use zlibwapi.dll in your application, you must define the
+ macro ZLIB_WINAPI when compiling your application's source files.
+
+
+Additional notes
+----------------
+- This DLL, named zlibwapi.dll, is compatible to the old zlib.dll built
+ by Gilles Vollant from the zlib 1.1.x sources, and distributed at
+ http://www.winimage.com/zLibDll
+ It uses the WINAPI calling convention for the exported functions, and
+ includes the minizip functionality. If your application needs that
+ particular build of zlib.dll, you can rename zlibwapi.dll to zlib.dll.
+
+- The new DLL was renamed because there exist several incompatible
+ versions of zlib.dll on the Internet.
+
+- There is also an official DLL build of zlib, named zlib1.dll. This one
+ is exporting the functions using the CDECL convention. See the file
+ win32\DLL_FAQ.txt found in this zlib distribution.
+
+- There used to be a ZLIB_DLL macro in zlib 1.1.x, but now this symbol
+ has a slightly different effect. To avoid compatibility problems, do
+ not define it here.
+
+
+Gilles Vollant
+info at winimage.com
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/miniunz.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/miniunz.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/miniunz.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/miniunz.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding = "Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="7.00"
+ Name="miniunz"
+ ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+ Keyword="Win32Proj">
+ <Platforms>
+ <Platform
+ Name="Win32"/>
+ </Platforms>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="Debug"
+ IntermediateDirectory="Debug"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="TRUE"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="5"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="4"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateDebugInformation="TRUE"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="Release"
+ IntermediateDirectory="Release"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="TRUE"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="TRUE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="3"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="TRUE"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ </Configurations>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
+ <File
+ RelativePath="..\..\minizip\miniunz.c">
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc">
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
+ </Filter>
+ <File
+ RelativePath="ReleaseDll\zlibwapi.lib">
+ </File>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/minizip.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/minizip.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/minizip.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/minizip.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding = "Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="7.00"
+ Name="minizip"
+ ProjectGUID="{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+ Keyword="Win32Proj">
+ <Platforms>
+ <Platform
+ Name="Win32"/>
+ </Platforms>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="Debug"
+ IntermediateDirectory="Debug"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="TRUE"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="5"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="4"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateDebugInformation="TRUE"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="Release"
+ IntermediateDirectory="Release"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="TRUE"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="TRUE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="3"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="TRUE"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ </Configurations>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
+ <File
+ RelativePath="..\..\minizip\minizip.c">
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc">
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
+ </Filter>
+ <File
+ RelativePath="ReleaseDll\zlibwapi.lib">
+ </File>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/testzlib.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/testzlib.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/testzlib.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/testzlib.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,126 @@
+<?xml version="1.0" encoding = "Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="7.00"
+ Name="testZlibDll"
+ ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
+ Keyword="Win32Proj">
+ <Platforms>
+ <Platform
+ Name="Win32"/>
+ </Platforms>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="Debug"
+ IntermediateDirectory="Debug"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="TRUE"
+ BasicRuntimeChecks="3"
+ RuntimeLibrary="5"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="4"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateDebugInformation="TRUE"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="Release"
+ IntermediateDirectory="Release"
+ ConfigurationType="1"
+ CharacterSet="2">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="TRUE"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="TRUE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ UsePrecompiledHeader="0"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="TRUE"
+ DebugInformationFormat="3"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="TRUE"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ </Configurations>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
+ <File
+ RelativePath="..\..\testzlib\testzlib.c">
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc">
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
+ </Filter>
+ <File
+ RelativePath="ReleaseDll\zlibwapi.lib">
+ </File>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlib.rc
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlib.rc?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlib.rc (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlib.rc Thu Nov 8 16:56:19 2007
@@ -0,0 +1,32 @@
+#include <windows.h>
+
+#define IDR_VERSION1 1
+IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+ FILEVERSION 1,2,3,0
+ PRODUCTVERSION 1,2,3,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_DOS_WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+
+ BEGIN
+ VALUE "FileDescription", "zlib data compression library\0"
+ VALUE "FileVersion", "1.2.3.0\0"
+ VALUE "InternalName", "zlib\0"
+ VALUE "OriginalFilename", "zlib.dll\0"
+ VALUE "ProductName", "ZLib.DLL\0"
+ VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+ VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibstat.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibstat.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibstat.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibstat.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,246 @@
+<?xml version="1.0" encoding = "Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="7.00"
+ Name="zlibstat"
+ SccProjectName=""
+ SccLocalPath="">
+ <Platforms>
+ <Platform
+ Name="Win32"/>
+ </Platforms>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory=".\zlibstatDebug"
+ IntermediateDirectory=".\zlibstatDebug"
+ ConfigurationType="4"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="5"
+ PrecompiledHeaderFile=".\zlibstatDebug/zlibstat.pch"
+ AssemblerListingLocation=".\zlibstatDebug/"
+ ObjectFile=".\zlibstatDebug/"
+ ProgramDataBaseFileName=".\zlibstatDebug/"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"
+ DebugInformationFormat="1"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/NODEFAULTLIB "
+ OutputFile=".\zlibstatDebug\zlibstat.lib"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ </Configuration>
+ <Configuration
+ Name="ReleaseAxp|Win32"
+ OutputDirectory=".\zlibsta0"
+ IntermediateDirectory=".\zlibsta0"
+ ConfigurationType="4"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibsta0/zlibstat.pch"
+ AssemblerListingLocation=".\zlibsta0/"
+ ObjectFile=".\zlibsta0/"
+ ProgramDataBaseFileName=".\zlibsta0/"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/NODEFAULTLIB "
+ OutputFile=".\zlibsta0\zlibstat.lib"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory=".\zlibstat"
+ IntermediateDirectory=".\zlibstat"
+ ConfigurationType="4"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;ASMV;ASMINF"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibstat/zlibstat.pch"
+ AssemblerListingLocation=".\zlibstat/"
+ ObjectFile=".\zlibstat/"
+ ProgramDataBaseFileName=".\zlibstat/"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj /NODEFAULTLIB "
+ OutputFile=".\zlibstat\zlibstat.lib"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="zlibstatWithoutAsm"
+ IntermediateDirectory="zlibstatWithoutAsm"
+ ConfigurationType="4"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="4"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibstat/zlibstat.pch"
+ AssemblerListingLocation=".\zlibstatWithoutAsm/"
+ ObjectFile=".\zlibstatWithoutAsm/"
+ ProgramDataBaseFileName=".\zlibstatWithoutAsm/"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions=" /NODEFAULTLIB "
+ OutputFile=".\zlibstatWithoutAsm\zlibstat.lib"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCMIDLTool"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ </Configuration>
+ </Configurations>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="">
+ <File
+ RelativePath="..\..\..\adler32.c">
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c">
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c">
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c">
+ </File>
+ <File
+ RelativePath="..\..\masmx86\gvmat32c.c">
+ </File>
+ <File
+ RelativePath="..\..\..\gzio.c">
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c">
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c">
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c">
+ </File>
+ <File
+ RelativePath=".\zlib.rc">
+ </File>
+ <File
+ RelativePath=".\zlibvc.def">
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c">
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.def
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.def?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.def (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.def Thu Nov 8 16:56:19 2007
@@ -0,0 +1,92 @@
+
+VERSION 1.23
+
+HEAPSIZE 1048576,8192
+
+EXPORTS
+ adler32 @1
+ compress @2
+ crc32 @3
+ deflate @4
+ deflateCopy @5
+ deflateEnd @6
+ deflateInit2_ @7
+ deflateInit_ @8
+ deflateParams @9
+ deflateReset @10
+ deflateSetDictionary @11
+ gzclose @12
+ gzdopen @13
+ gzerror @14
+ gzflush @15
+ gzopen @16
+ gzread @17
+ gzwrite @18
+ inflate @19
+ inflateEnd @20
+ inflateInit2_ @21
+ inflateInit_ @22
+ inflateReset @23
+ inflateSetDictionary @24
+ inflateSync @25
+ uncompress @26
+ zlibVersion @27
+ gzprintf @28
+ gzputc @29
+ gzgetc @30
+ gzseek @31
+ gzrewind @32
+ gztell @33
+ gzeof @34
+ gzsetparams @35
+ zError @36
+ inflateSyncPoint @37
+ get_crc_table @38
+ compress2 @39
+ gzputs @40
+ gzgets @41
+ inflateCopy @42
+ inflateBackInit_ @43
+ inflateBack @44
+ inflateBackEnd @45
+ compressBound @46
+ deflateBound @47
+ gzclearerr @48
+ gzungetc @49
+ zlibCompileFlags @50
+ deflatePrime @51
+
+ unzOpen @61
+ unzClose @62
+ unzGetGlobalInfo @63
+ unzGetCurrentFileInfo @64
+ unzGoToFirstFile @65
+ unzGoToNextFile @66
+ unzOpenCurrentFile @67
+ unzReadCurrentFile @68
+ unzOpenCurrentFile3 @69
+ unztell @70
+ unzeof @71
+ unzCloseCurrentFile @72
+ unzGetGlobalComment @73
+ unzStringFileNameCompare @74
+ unzLocateFile @75
+ unzGetLocalExtrafield @76
+ unzOpen2 @77
+ unzOpenCurrentFile2 @78
+ unzOpenCurrentFilePassword @79
+
+ zipOpen @80
+ zipOpenNewFileInZip @81
+ zipWriteInFileInZip @82
+ zipCloseFileInZip @83
+ zipClose @84
+ zipOpenNewFileInZip2 @86
+ zipCloseFileInZipRaw @87
+ zipOpen2 @88
+ zipOpenNewFileInZip3 @89
+
+ unzGetFilePos @100
+ unzGoToFilePos @101
+
+ fill_win32_filefunc @110
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.sln
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.sln?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.sln (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.sln Thu Nov 8 16:56:19 2007
@@ -0,0 +1,78 @@
+Microsoft Visual Studio Solution File, Format Version 7.00
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testZlibDll", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
+EndProject
+Global
+ GlobalSection(SolutionConfiguration) = preSolution
+ ConfigName.0 = Debug
+ ConfigName.1 = Release
+ ConfigName.2 = ReleaseAxp
+ ConfigName.3 = ReleaseWithoutAsm
+ ConfigName.4 = ReleaseWithoutCrtdll
+ EndGlobalSection
+ GlobalSection(ProjectDependencies) = postSolution
+ EndGlobalSection
+ GlobalSection(ProjectConfiguration) = postSolution
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug.Build.0 = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release.Build.0 = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseAxp.ActiveCfg = ReleaseAxp|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseAxp.Build.0 = ReleaseAxp|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm.Build.0 = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutCrtdll.ActiveCfg = ReleaseAxp|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutCrtdll.Build.0 = ReleaseAxp|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug.Build.0 = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release.Build.0 = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseAxp.ActiveCfg = ReleaseAxp|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseAxp.Build.0 = ReleaseAxp|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm.Build.0 = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutCrtdll.ActiveCfg = ReleaseWithoutCrtdll|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutCrtdll.Build.0 = ReleaseWithoutCrtdll|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAxp.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAxp.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseAxp.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseAxp.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.Build.0 = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
+ EndGlobalSection
+ GlobalSection(ExtensibilityGlobals) = postSolution
+ EndGlobalSection
+ GlobalSection(ExtensibilityAddIns) = postSolution
+ EndGlobalSection
+EndGlobal
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc7/zlibvc.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,445 @@
+<?xml version="1.0" encoding = "Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="7.00"
+ Name="zlibvc"
+ SccProjectName=""
+ SccLocalPath="">
+ <Platforms>
+ <Platform
+ Name="Win32"/>
+ </Platforms>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory=".\DebugDll"
+ IntermediateDirectory=".\DebugDll"
+ ConfigurationType="2"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE">
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="1"
+ PrecompiledHeaderFile=".\DebugDll/zlibvc.pch"
+ AssemblerListingLocation=".\DebugDll/"
+ ObjectFile=".\DebugDll/"
+ ProgramDataBaseFileName=".\DebugDll/"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"
+ DebugInformationFormat="4"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+ OutputFile=".\DebugDll\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="TRUE"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="TRUE"
+ ProgramDatabaseFile=".\DebugDll/zlibwapi.pdb"
+ SubSystem="2"
+ ImportLibrary=".\DebugDll/zlibwapi.lib"/>
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="TRUE"
+ SuppressStartupBanner="TRUE"
+ TargetEnvironment="1"
+ TypeLibraryName=".\DebugDll/zlibvc.tlb"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory=".\zlibDllWithoutAsm"
+ IntermediateDirectory=".\zlibDllWithoutAsm"
+ ConfigurationType="2"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE"
+ WholeProgramOptimization="TRUE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="0"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibDllWithoutAsm/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation=".\zlibDllWithoutAsm/"
+ ObjectFile=".\zlibDllWithoutAsm/"
+ ProgramDataBaseFileName=".\zlibDllWithoutAsm/"
+ BrowseInformation="1"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="crtdll.lib"
+ OutputFile=".\zlibDllWithoutAsm\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="TRUE"
+ IgnoreAllDefaultLibraries="TRUE"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile=".\zlibDllWithoutAsm/zlibwapi.pdb"
+ GenerateMapFile="TRUE"
+ MapFileName=".\zlibDllWithoutAsm/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary=".\zlibDllWithoutAsm/zlibwapi.lib"/>
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="TRUE"
+ SuppressStartupBanner="TRUE"
+ TargetEnvironment="1"
+ TypeLibraryName=".\zlibDllWithoutAsm/zlibvc.tlb"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutCrtdll|Win32"
+ OutputDirectory=".\zlibDllWithoutCrtDll"
+ IntermediateDirectory=".\zlibDllWithoutCrtDll"
+ ConfigurationType="2"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE"
+ WholeProgramOptimization="TRUE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="0"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibDllWithoutCrtDll/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation=".\zlibDllWithoutCrtDll/"
+ ObjectFile=".\zlibDllWithoutCrtDll/"
+ ProgramDataBaseFileName=".\zlibDllWithoutCrtDll/"
+ BrowseInformation="1"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
+ OutputFile=".\zlibDllWithoutCrtDll\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="TRUE"
+ IgnoreAllDefaultLibraries="FALSE"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile=".\zlibDllWithoutCrtDll/zlibwapi.pdb"
+ GenerateMapFile="TRUE"
+ MapFileName=".\zlibDllWithoutCrtDll/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary=".\zlibDllWithoutCrtDll/zlibwapi.lib"/>
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="TRUE"
+ SuppressStartupBanner="TRUE"
+ TargetEnvironment="1"
+ TypeLibraryName=".\zlibDllWithoutCrtDll/zlibvc.tlb"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="ReleaseAxp|Win32"
+ OutputDirectory=".\zlibvc__"
+ IntermediateDirectory=".\zlibvc__"
+ ConfigurationType="2"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE"
+ WholeProgramOptimization="TRUE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="0"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\zlibvc__/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation=".\zlibvc__/"
+ ObjectFile=".\zlibvc__/"
+ ProgramDataBaseFileName=".\zlibvc__/"
+ BrowseInformation="1"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="crtdll.lib"
+ OutputFile="zlibvc__\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="TRUE"
+ IgnoreAllDefaultLibraries="TRUE"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile=".\zlibvc__/zlibwapi.pdb"
+ GenerateMapFile="TRUE"
+ MapFileName=".\zlibvc__/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary=".\zlibvc__/zlibwapi.lib"/>
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="TRUE"
+ SuppressStartupBanner="TRUE"
+ TargetEnvironment="1"
+ TypeLibraryName=".\zlibvc__/zlibvc.tlb"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory=".\ReleaseDll"
+ IntermediateDirectory=".\ReleaseDll"
+ ConfigurationType="2"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="FALSE"
+ WholeProgramOptimization="TRUE">
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
+ StringPooling="TRUE"
+ ExceptionHandling="FALSE"
+ RuntimeLibrary="0"
+ EnableFunctionLevelLinking="TRUE"
+ PrecompiledHeaderFile=".\ReleaseDll/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation=".\ReleaseDll/"
+ ObjectFile=".\ReleaseDll/"
+ ProgramDataBaseFileName=".\ReleaseDll/"
+ BrowseInformation="1"
+ WarningLevel="3"
+ SuppressStartupBanner="TRUE"/>
+ <Tool
+ Name="VCCustomBuildTool"/>
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj crtdll.lib"
+ OutputFile=".\ReleaseDll\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="TRUE"
+ IgnoreAllDefaultLibraries="TRUE"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile=".\ReleaseDll/zlibwapi.pdb"
+ GenerateMapFile="TRUE"
+ MapFileName=".\ReleaseDll/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary=".\ReleaseDll/zlibwapi.lib"/>
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="TRUE"
+ SuppressStartupBanner="TRUE"
+ TargetEnvironment="1"
+ TypeLibraryName=".\Release/zlibvc.tlb"/>
+ <Tool
+ Name="VCPostBuildEventTool"/>
+ <Tool
+ Name="VCPreBuildEventTool"/>
+ <Tool
+ Name="VCPreLinkEventTool"/>
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"/>
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"/>
+ <Tool
+ Name="VCWebDeploymentTool"/>
+ </Configuration>
+ </Configurations>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90">
+ <File
+ RelativePath="..\..\..\adler32.c">
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c">
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c">
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c">
+ </File>
+ <File
+ RelativePath="..\..\masmx86\gvmat32c.c">
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="TRUE">
+ <Tool
+ Name="VCCLCompilerTool"/>
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\gzio.c">
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c">
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\iowin32.c">
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c">
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c">
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c">
+ <FileConfiguration
+ Name="Release|Win32">
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"/>
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c">
+ <FileConfiguration
+ Name="Release|Win32">
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"/>
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath=".\zlib.rc">
+ </File>
+ <File
+ RelativePath=".\zlibvc.def">
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c">
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;fi;fd">
+ <File
+ RelativePath="..\..\..\deflate.h">
+ </File>
+ <File
+ RelativePath="..\..\..\infblock.h">
+ </File>
+ <File
+ RelativePath="..\..\..\infcodes.h">
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.h">
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.h">
+ </File>
+ <File
+ RelativePath="..\..\..\infutil.h">
+ </File>
+ <File
+ RelativePath="..\..\..\zconf.h">
+ </File>
+ <File
+ RelativePath="..\..\..\zlib.h">
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.h">
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe">
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/miniunz.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/miniunz.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/miniunz.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/miniunz.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,566 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="miniunz"
+ ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+ IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/miniunz.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\minizip\miniunz.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/minizip.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/minizip.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/minizip.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/minizip.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="minizip"
+ ProjectGUID="{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\MiniZip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\$(ConfigurationName)"
+ IntermediateDirectory="x64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\$(ConfigurationName)"
+ IntermediateDirectory="ia64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\MiniZip$(ConfigurationName)"
+ IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\$(ConfigurationName)"
+ IntermediateDirectory="x64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\$(ConfigurationName)"
+ IntermediateDirectory="ia64\$(ConfigurationName)"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/minizip.exe"
+ LinkIncremental="1"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\minizip\minizip.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlib.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlib.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlib.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlib.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,948 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="testzlib"
+ ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+ RootNamespace="testzlib"
+ Keyword="Win32Proj"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerOutput="4"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerOutput="4"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies=""
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ AssemblerListingLocation="$(IntDir)\"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+ GenerateManifest="false"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ CharacterSet="2"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\.."
+ PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx86\gvmat32c.c"
+ >
+ <FileConfiguration
+ Name="Debug|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Win64 (AMD64)"
+ ExcludedFromBuild="TRUE"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win64 (AMD64)"
+ ExcludedFromBuild="TRUE"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseAsm|Win64 (AMD64)"
+ ExcludedFromBuild="TRUE"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\testzlib\testzlib.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlibdll.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlibdll.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlibdll.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/testzlibdll.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,567 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="TestZlibDll"
+ ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+ Keyword="Win32Proj"
+ SignManifests="true"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+ MinimalRebuild="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="2"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+ SubSystem="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="1"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="1"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ CharacterSet="2"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="2"
+ InlineFunctionExpansion="1"
+ OmitFramePointers="true"
+ AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+ PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+ StringPooling="true"
+ BasicRuntimeChecks="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ UsePrecompiledHeader="0"
+ AssemblerListingLocation="$(IntDir)\"
+ WarningLevel="3"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+ OutputFile="$(OutDir)/testzlib.exe"
+ LinkIncremental="1"
+ GenerateManifest="false"
+ GenerateDebugInformation="true"
+ SubSystem="1"
+ OptimizeReferences="2"
+ EnableCOMDATFolding="2"
+ OptimizeForWindows98="1"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+ >
+ <File
+ RelativePath="..\..\testzlib\testzlib.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;inc"
+ >
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlib.rc
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlib.rc?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlib.rc (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlib.rc Thu Nov 8 16:56:19 2007
@@ -0,0 +1,32 @@
+#include <windows.h>
+
+#define IDR_VERSION1 1
+IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
+ FILEVERSION 1,2,3,0
+ PRODUCTVERSION 1,2,3,0
+ FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
+ FILEFLAGS 0
+ FILEOS VOS_DOS_WINDOWS32
+ FILETYPE VFT_DLL
+ FILESUBTYPE 0 // not used
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904E4"
+ //language ID = U.S. English, char set = Windows, Multilingual
+
+ BEGIN
+ VALUE "FileDescription", "zlib data compression library\0"
+ VALUE "FileVersion", "1.2.3.0\0"
+ VALUE "InternalName", "zlib\0"
+ VALUE "OriginalFilename", "zlib.dll\0"
+ VALUE "ProductName", "ZLib.DLL\0"
+ VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+ VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0"
+ END
+ END
+ BLOCK "VarFileInfo"
+ BEGIN
+ VALUE "Translation", 0x0409, 1252
+ END
+END
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibstat.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibstat.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibstat.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibstat.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,870 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="zlibstat"
+ ProjectGUID="{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ ExceptionHandling="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ Detect64BitPortabilityProblems="true"
+ DebugInformationFormat="1"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ASMV;ASMINF"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ASMV;ASMINF;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="0"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="3"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+ ConfigurationType="4"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ TargetEnvironment="2"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLibrarianTool"
+ AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+ OutputFile="$(OutDir)\zlibstat.lib"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx86\gvmat32c.c"
+ >
+ <FileConfiguration
+ Name="Debug|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\gzio.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c"
+ >
+ </File>
+ <File
+ RelativePath=".\zlib.rc"
+ >
+ </File>
+ <File
+ RelativePath=".\zlibvc.def"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.def
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.def?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.def (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.def Thu Nov 8 16:56:19 2007
@@ -0,0 +1,92 @@
+
+VERSION 1.23
+
+HEAPSIZE 1048576,8192
+
+EXPORTS
+ adler32 @1
+ compress @2
+ crc32 @3
+ deflate @4
+ deflateCopy @5
+ deflateEnd @6
+ deflateInit2_ @7
+ deflateInit_ @8
+ deflateParams @9
+ deflateReset @10
+ deflateSetDictionary @11
+ gzclose @12
+ gzdopen @13
+ gzerror @14
+ gzflush @15
+ gzopen @16
+ gzread @17
+ gzwrite @18
+ inflate @19
+ inflateEnd @20
+ inflateInit2_ @21
+ inflateInit_ @22
+ inflateReset @23
+ inflateSetDictionary @24
+ inflateSync @25
+ uncompress @26
+ zlibVersion @27
+ gzprintf @28
+ gzputc @29
+ gzgetc @30
+ gzseek @31
+ gzrewind @32
+ gztell @33
+ gzeof @34
+ gzsetparams @35
+ zError @36
+ inflateSyncPoint @37
+ get_crc_table @38
+ compress2 @39
+ gzputs @40
+ gzgets @41
+ inflateCopy @42
+ inflateBackInit_ @43
+ inflateBack @44
+ inflateBackEnd @45
+ compressBound @46
+ deflateBound @47
+ gzclearerr @48
+ gzungetc @49
+ zlibCompileFlags @50
+ deflatePrime @51
+
+ unzOpen @61
+ unzClose @62
+ unzGetGlobalInfo @63
+ unzGetCurrentFileInfo @64
+ unzGoToFirstFile @65
+ unzGoToNextFile @66
+ unzOpenCurrentFile @67
+ unzReadCurrentFile @68
+ unzOpenCurrentFile3 @69
+ unztell @70
+ unzeof @71
+ unzCloseCurrentFile @72
+ unzGetGlobalComment @73
+ unzStringFileNameCompare @74
+ unzLocateFile @75
+ unzGetLocalExtrafield @76
+ unzOpen2 @77
+ unzOpenCurrentFile2 @78
+ unzOpenCurrentFilePassword @79
+
+ zipOpen @80
+ zipOpenNewFileInZip @81
+ zipWriteInFileInZip @82
+ zipCloseFileInZip @83
+ zipClose @84
+ zipOpenNewFileInZip2 @86
+ zipCloseFileInZipRaw @87
+ zipOpen2 @88
+ zipOpenNewFileInZip3 @89
+
+ unzGetFilePos @100
+ unzGoToFilePos @101
+
+ fill_win32_filefunc @110
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.sln
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.sln?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.sln (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.sln Thu Nov 8 16:56:19 2007
@@ -0,0 +1,144 @@
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibvc", "zlibvc.vcproj", "{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlibstat", "zlibstat.vcproj", "{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "TestZlibDll", "testzlibdll.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj", "{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+ ProjectSection(ProjectDependencies) = postProject
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D} = {8FD826F8-3739-44E6-8CC8-997122E53B8D}
+ EndProjectSection
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Itanium = Debug|Itanium
+ Debug|Win32 = Debug|Win32
+ Debug|x64 = Debug|x64
+ Release|Itanium = Release|Itanium
+ Release|Win32 = Release|Win32
+ Release|x64 = Release|x64
+ ReleaseWithoutAsm|Itanium = ReleaseWithoutAsm|Itanium
+ ReleaseWithoutAsm|Win32 = ReleaseWithoutAsm|Win32
+ ReleaseWithoutAsm|x64 = ReleaseWithoutAsm|x64
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Itanium.Build.0 = Debug|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.ActiveCfg = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|Win32.Build.0 = Debug|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.ActiveCfg = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Debug|x64.Build.0 = Debug|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.ActiveCfg = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Itanium.Build.0 = Release|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.ActiveCfg = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|Win32.Build.0 = Release|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.Release|x64.Build.0 = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {8FD826F8-3739-44E6-8CC8-997122E53B8D}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Itanium.Build.0 = Debug|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.ActiveCfg = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|Win32.Build.0 = Debug|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.ActiveCfg = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Debug|x64.Build.0 = Debug|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.ActiveCfg = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Itanium.Build.0 = Release|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.ActiveCfg = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|Win32.Build.0 = Release|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.ActiveCfg = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.Release|x64.Build.0 = Release|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = ReleaseWithoutAsm|Itanium
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.Build.0 = ReleaseWithoutAsm|Win32
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = ReleaseWithoutAsm|x64
+ {AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.Build.0 = ReleaseWithoutAsm|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694366A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Itanium.Build.0 = Debug|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.ActiveCfg = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Debug|x64.Build.0 = Debug|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.ActiveCfg = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.Release|x64.Build.0 = Release|x64
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium
+ {48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.ActiveCfg = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Itanium.Build.0 = Debug|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.ActiveCfg = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|Win32.Build.0 = Debug|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.ActiveCfg = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Debug|x64.Build.0 = Debug|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.ActiveCfg = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|Win32.Build.0 = Release|Win32
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.ActiveCfg = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.Release|x64.Build.0 = Release|x64
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Itanium.Build.0 = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|Win32.ActiveCfg = Release|Itanium
+ {C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm|x64.ActiveCfg = Release|Itanium
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
Added: llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.vcproj
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.vcproj?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.vcproj (added)
+++ llvm-gcc-4.2/trunk/zlib/contrib/vstudio/vc8/zlibvc.vcproj Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1219 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+ ProjectType="Visual C++"
+ Version="8,00"
+ Name="zlibvc"
+ ProjectGUID="{8FD826F8-3739-44E6-8CC8-997122E53B8D}"
+ >
+ <Platforms>
+ <Platform
+ Name="Win32"
+ />
+ <Platform
+ Name="x64"
+ />
+ <Platform
+ Name="Itanium"
+ />
+ </Platforms>
+ <ToolFiles>
+ </ToolFiles>
+ <Configurations>
+ <Configuration
+ Name="Debug|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,_CRT_SECURE_NO_DEPRECATE,ZLIB_WINAPI,ASMV,ASMINF"
+ ExceptionHandling="0"
+ RuntimeLibrary="1"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="4"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,_CRT_SECURE_NO_DEPRECATE,ZLIB_WINAPI,ASMV,ASMINF;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Debug|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="_DEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ Optimization="0"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;WIN64"
+ ExceptionHandling="0"
+ RuntimeLibrary="3"
+ BufferSecurityCheck="false"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ DebugInformationFormat="3"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="_DEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="2"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ GenerateDebugInformation="true"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,_CRT_SECURE_NO_DEPRECATE,ZLIB_WINAPI"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,_CRT_SECURE_NO_DEPRECATE,ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="ReleaseWithoutAsm|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32,_CRT_SECURE_NO_DEPRECATE,ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Win32"
+ OutputDirectory="x86\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x86\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="1"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="WIN32;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;ASMV;ASMINF"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalOptions="/MACHINE:I386"
+ AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|x64"
+ OutputDirectory="x64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="x64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="3"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;ASMV;ASMINF;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="17"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ <Configuration
+ Name="Release|Itanium"
+ OutputDirectory="ia64\ZlibDll$(ConfigurationName)"
+ IntermediateDirectory="ia64\ZlibDll$(ConfigurationName)\Tmp"
+ ConfigurationType="2"
+ InheritedPropertySheets="UpgradeFromVC70.vsprops"
+ UseOfMFC="0"
+ ATLMinimizesCRunTimeLibraryUsage="false"
+ WholeProgramOptimization="1"
+ >
+ <Tool
+ Name="VCPreBuildEventTool"
+ />
+ <Tool
+ Name="VCCustomBuildTool"
+ />
+ <Tool
+ Name="VCXMLDataGeneratorTool"
+ />
+ <Tool
+ Name="VCWebServiceProxyGeneratorTool"
+ />
+ <Tool
+ Name="VCMIDLTool"
+ PreprocessorDefinitions="NDEBUG"
+ MkTypLibCompatible="true"
+ SuppressStartupBanner="true"
+ TargetEnvironment="2"
+ TypeLibraryName="$(OutDir)/zlibvc.tlb"
+ />
+ <Tool
+ Name="VCCLCompilerTool"
+ InlineFunctionExpansion="1"
+ AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+ PreprocessorDefinitions="_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;WIN64"
+ StringPooling="true"
+ ExceptionHandling="0"
+ RuntimeLibrary="2"
+ BufferSecurityCheck="false"
+ EnableFunctionLevelLinking="true"
+ PrecompiledHeaderFile="$(IntDir)/zlibvc.pch"
+ AssemblerOutput="2"
+ AssemblerListingLocation="$(IntDir)\"
+ ObjectFile="$(IntDir)\"
+ ProgramDataBaseFileName="$(OutDir)\"
+ BrowseInformation="0"
+ WarningLevel="3"
+ SuppressStartupBanner="true"
+ />
+ <Tool
+ Name="VCManagedResourceCompilerTool"
+ />
+ <Tool
+ Name="VCResourceCompilerTool"
+ PreprocessorDefinitions="NDEBUG"
+ Culture="1036"
+ />
+ <Tool
+ Name="VCPreLinkEventTool"
+ />
+ <Tool
+ Name="VCLinkerTool"
+ OutputFile="$(OutDir)\zlibwapi.dll"
+ LinkIncremental="1"
+ SuppressStartupBanner="true"
+ GenerateManifest="false"
+ IgnoreAllDefaultLibraries="false"
+ ModuleDefinitionFile=".\zlibvc.def"
+ ProgramDatabaseFile="$(OutDir)/zlibwapi.pdb"
+ GenerateMapFile="true"
+ MapFileName="$(OutDir)/zlibwapi.map"
+ SubSystem="2"
+ OptimizeForWindows98="1"
+ ImportLibrary="$(OutDir)/zlibwapi.lib"
+ TargetMachine="5"
+ />
+ <Tool
+ Name="VCALinkTool"
+ />
+ <Tool
+ Name="VCManifestTool"
+ />
+ <Tool
+ Name="VCXDCMakeTool"
+ />
+ <Tool
+ Name="VCBscMakeTool"
+ />
+ <Tool
+ Name="VCFxCopTool"
+ />
+ <Tool
+ Name="VCAppVerifierTool"
+ />
+ <Tool
+ Name="VCWebDeploymentTool"
+ />
+ <Tool
+ Name="VCPostBuildEventTool"
+ />
+ </Configuration>
+ </Configurations>
+ <References>
+ </References>
+ <Files>
+ <Filter
+ Name="Source Files"
+ Filter="cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+ >
+ <File
+ RelativePath="..\..\..\adler32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\compress.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\crc32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\deflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx86\gvmat32c.c"
+ >
+ <FileConfiguration
+ Name="Debug|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\gzio.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infback.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\masmx64\inffas8664.c"
+ >
+ <FileConfiguration
+ Name="Debug|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Debug|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="ReleaseWithoutAsm|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Win32"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ ExcludedFromBuild="true"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inflate.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\ioapi.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\iowin32.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\trees.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\uncompr.c"
+ >
+ </File>
+ <File
+ RelativePath="..\..\minizip\unzip.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath="..\..\minizip\zip.c"
+ >
+ <FileConfiguration
+ Name="Release|Win32"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|x64"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ <FileConfiguration
+ Name="Release|Itanium"
+ >
+ <Tool
+ Name="VCCLCompilerTool"
+ AdditionalIncludeDirectories=""
+ PreprocessorDefinitions="ZLIB_INTERNAL"
+ />
+ </FileConfiguration>
+ </File>
+ <File
+ RelativePath=".\zlib.rc"
+ >
+ </File>
+ <File
+ RelativePath=".\zlibvc.def"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.c"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Header Files"
+ Filter="h;hpp;hxx;hm;inl;fi;fd"
+ >
+ <File
+ RelativePath="..\..\..\deflate.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infblock.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infcodes.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inffast.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\inftrees.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\infutil.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zconf.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zlib.h"
+ >
+ </File>
+ <File
+ RelativePath="..\..\..\zutil.h"
+ >
+ </File>
+ </Filter>
+ <Filter
+ Name="Resource Files"
+ Filter="ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+ >
+ </Filter>
+ </Files>
+ <Globals>
+ </Globals>
+</VisualStudioProject>
Added: llvm-gcc-4.2/trunk/zlib/crc32.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/crc32.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/crc32.c (added)
+++ llvm-gcc-4.2/trunk/zlib/crc32.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,423 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64 at csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors. This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id: crc32.c,v 1.1.1.2 2002/03/11 21:53:23 tromey Exp $ */
+
+/*
+ Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+ protection on the static variables used to control the first-use generation
+ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+ first call get_crc_table() to initialize the tables before allowing more than
+ one thread to use crc32().
+ */
+
+#ifdef MAKECRCH
+# include <stdio.h>
+# ifndef DYNAMIC_CRC_TABLE
+# define DYNAMIC_CRC_TABLE
+# endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h" /* for STDC and FAR definitions */
+
+#define local static
+
+/* Find a four-byte integer type for crc32_little() and crc32_big(). */
+#ifndef NOBYFOUR
+# ifdef STDC /* need ANSI C limits.h to determine sizes */
+# include <limits.h>
+# define BYFOUR
+# if (UINT_MAX == 0xffffffffUL)
+ typedef unsigned int u4;
+# else
+# if (ULONG_MAX == 0xffffffffUL)
+ typedef unsigned long u4;
+# else
+# if (USHRT_MAX == 0xffffffffUL)
+ typedef unsigned short u4;
+# else
+# undef BYFOUR /* can't find a four-byte integer type! */
+# endif
+# endif
+# endif
+# endif /* STDC */
+#endif /* !NOBYFOUR */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#ifdef BYFOUR
+# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
+ (((w)&0xff00)<<8)+(((w)&0xff)<<24))
+ local unsigned long crc32_little OF((unsigned long,
+ const unsigned char FAR *, unsigned));
+ local unsigned long crc32_big OF((unsigned long,
+ const unsigned char FAR *, unsigned));
+# define TBLS 8
+#else
+# define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local unsigned long FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+ local void write_table OF((FILE *, const unsigned long FAR *));
+#endif /* MAKECRCH */
+/*
+ Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+ x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+ Polynomials over GF(2) are represented in binary, one bit per coefficient,
+ with the lowest powers in the most significant bit. Then adding polynomials
+ is just exclusive-or, and multiplying a polynomial by x is a right shift by
+ one. If we call the above polynomial p, and represent a byte as the
+ polynomial q, also with the lowest power in the most significant bit (so the
+ byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+ where a mod b means the remainder after dividing a by b.
+
+ This calculation is done using the shift-register method of multiplying and
+ taking the remainder. The register is initialized to zero, and for each
+ incoming bit, x^32 is added mod p to the register if the bit is a one (where
+ x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+ x (which is shifting right by one and adding x^32 mod p if the bit shifted
+ out is a one). We start with the highest power (least significant bit) of
+ q and repeat for all eight bits of q.
+
+ The first table is simply the CRC of all possible eight bit values. This is
+ all the information needed to generate CRCs on data a byte at a time for all
+ combinations of CRC register values and incoming bytes. The remaining tables
+ allow for word-at-a-time CRC calculation for both big-endian and little-
+ endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+ unsigned long c;
+ int n, k;
+ unsigned long poly; /* polynomial exclusive-or pattern */
+ /* terms of polynomial defining this crc (except x^32): */
+ static volatile int first = 1; /* flag to limit concurrent making */
+ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+ /* See if another task is already doing this (not thread-safe, but better
+ than nothing -- significantly reduces duration of vulnerability in
+ case the advice about DYNAMIC_CRC_TABLE is ignored) */
+ if (first) {
+ first = 0;
+
+ /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+ poly = 0UL;
+ for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
+ poly |= 1UL << (31 - p[n]);
+
+ /* generate a crc for every 8-bit value */
+ for (n = 0; n < 256; n++) {
+ c = (unsigned long)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[0][n] = c;
+ }
+
+#ifdef BYFOUR
+ /* generate crc for each value followed by one, two, and three zeros,
+ and then the byte reversal of those as well as the first table */
+ for (n = 0; n < 256; n++) {
+ c = crc_table[0][n];
+ crc_table[4][n] = REV(c);
+ for (k = 1; k < 4; k++) {
+ c = crc_table[0][c & 0xff] ^ (c >> 8);
+ crc_table[k][n] = c;
+ crc_table[k + 4][n] = REV(c);
+ }
+ }
+#endif /* BYFOUR */
+
+ crc_table_empty = 0;
+ }
+ else { /* not first */
+ /* wait for the other guy to finish (not efficient, but rare) */
+ while (crc_table_empty)
+ ;
+ }
+
+#ifdef MAKECRCH
+ /* write out CRC tables to crc32.h */
+ {
+ FILE *out;
+
+ out = fopen("crc32.h", "w");
+ if (out == NULL) return;
+ fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+ fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+ fprintf(out, "local const unsigned long FAR ");
+ fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
+ write_table(out, crc_table[0]);
+# ifdef BYFOUR
+ fprintf(out, "#ifdef BYFOUR\n");
+ for (k = 1; k < 8; k++) {
+ fprintf(out, " },\n {\n");
+ write_table(out, crc_table[k]);
+ }
+ fprintf(out, "#endif\n");
+# endif /* BYFOUR */
+ fprintf(out, " }\n};\n");
+ fclose(out);
+ }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+ FILE *out;
+ const unsigned long FAR *table;
+{
+ int n;
+
+ for (n = 0; n < 256; n++)
+ fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
+ n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const unsigned long FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+ return (const unsigned long FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ unsigned len;
+{
+ if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+ if (sizeof(void *) == sizeof(ptrdiff_t)) {
+ u4 endian;
+
+ endian = 1;
+ if (*((unsigned char *)(&endian)))
+ return crc32_little(crc, buf, len);
+ else
+ return crc32_big(crc, buf, len);
+ }
+#endif /* BYFOUR */
+ crc = crc ^ 0xffffffffUL;
+ while (len >= 8) {
+ DO8;
+ len -= 8;
+ }
+ if (len) do {
+ DO1;
+ } while (--len);
+ return crc ^ 0xffffffffUL;
+}
+
+#ifdef BYFOUR
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+ c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+ crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ unsigned len;
+{
+ register u4 c;
+ register const u4 FAR *buf4;
+
+ c = (u4)crc;
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ len--;
+ }
+
+ buf4 = (const u4 FAR *)(const void FAR *)buf;
+ while (len >= 32) {
+ DOLIT32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOLIT4;
+ len -= 4;
+ }
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *++buf4; \
+ c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+ crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+ unsigned long crc;
+ const unsigned char FAR *buf;
+ unsigned len;
+{
+ register u4 c;
+ register const u4 FAR *buf4;
+
+ c = REV((u4)crc);
+ c = ~c;
+ while (len && ((ptrdiff_t)buf & 3)) {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ len--;
+ }
+
+ buf4 = (const u4 FAR *)(const void FAR *)buf;
+ buf4--;
+ while (len >= 32) {
+ DOBIG32;
+ len -= 32;
+ }
+ while (len >= 4) {
+ DOBIG4;
+ len -= 4;
+ }
+ buf4++;
+ buf = (const unsigned char FAR *)buf4;
+
+ if (len) do {
+ c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+ } while (--len);
+ c = ~c;
+ return (unsigned long)(REV(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+ unsigned long *mat;
+ unsigned long vec;
+{
+ unsigned long sum;
+
+ sum = 0;
+ while (vec) {
+ if (vec & 1)
+ sum ^= *mat;
+ vec >>= 1;
+ mat++;
+ }
+ return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+ unsigned long *square;
+ unsigned long *mat;
+{
+ int n;
+
+ for (n = 0; n < GF2_DIM; n++)
+ square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off_t len2;
+{
+ int n;
+ unsigned long row;
+ unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
+ unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
+
+ /* degenerate case */
+ if (len2 == 0)
+ return crc1;
+
+ /* put operator for one zero bit in odd */
+ odd[0] = 0xedb88320L; /* CRC-32 polynomial */
+ row = 1;
+ for (n = 1; n < GF2_DIM; n++) {
+ odd[n] = row;
+ row <<= 1;
+ }
+
+ /* put operator for two zero bits in even */
+ gf2_matrix_square(even, odd);
+
+ /* put operator for four zero bits in odd */
+ gf2_matrix_square(odd, even);
+
+ /* apply len2 zeros to crc1 (first square will put the operator for one
+ zero byte, eight zero bits, in even) */
+ do {
+ /* apply zeros operator for this bit of len2 */
+ gf2_matrix_square(even, odd);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(even, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ if (len2 == 0)
+ break;
+
+ /* another iteration of the loop with odd and even swapped */
+ gf2_matrix_square(odd, even);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(odd, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ } while (len2 != 0);
+
+ /* return combined crc */
+ crc1 ^= crc2;
+ return crc1;
+}
Added: llvm-gcc-4.2/trunk/zlib/crc32.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/crc32.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/crc32.h (added)
+++ llvm-gcc-4.2/trunk/zlib/crc32.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const unsigned long FAR crc_table[TBLS][256] =
+{
+ {
+ 0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+ 0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+ 0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+ 0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+ 0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+ 0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+ 0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+ 0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+ 0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+ 0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+ 0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+ 0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+ 0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+ 0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+ 0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+ 0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+ 0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+ 0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+ 0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+ 0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+ 0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+ 0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+ 0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+ 0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+ 0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+ 0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+ 0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+ 0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+ 0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+ 0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+ 0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+ 0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+ 0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+ 0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+ 0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+ 0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+ 0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+ 0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+ 0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+ 0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+ 0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+ 0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+ 0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+ 0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+ 0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+ 0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+ 0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+ 0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+ 0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+ 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+ 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+ 0x2d02ef8dUL
+#ifdef BYFOUR
+ },
+ {
+ 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+ 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+ 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+ 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+ 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+ 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+ 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+ 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+ 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+ 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+ 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+ 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+ 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+ 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+ 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+ 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+ 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+ 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+ 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+ 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+ 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+ 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+ 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+ 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+ 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+ 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+ 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+ 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+ 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+ 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+ 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+ 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+ 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+ 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+ 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+ 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+ 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+ 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+ 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+ 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+ 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+ 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+ 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+ 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+ 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+ 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+ 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+ 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+ 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+ 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+ 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+ 0x9324fd72UL
+ },
+ {
+ 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+ 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+ 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+ 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+ 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+ 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+ 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+ 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+ 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+ 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+ 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+ 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+ 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+ 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+ 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+ 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+ 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+ 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+ 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+ 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+ 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+ 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+ 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+ 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+ 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+ 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+ 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+ 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+ 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+ 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+ 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+ 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+ 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+ 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+ 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+ 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+ 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+ 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+ 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+ 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+ 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+ 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+ 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+ 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+ 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+ 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+ 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+ 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+ 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+ 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+ 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+ 0xbe9834edUL
+ },
+ {
+ 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+ 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+ 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+ 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+ 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+ 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+ 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+ 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+ 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+ 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+ 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+ 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+ 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+ 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+ 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+ 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+ 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+ 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+ 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+ 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+ 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+ 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+ 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+ 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+ 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+ 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+ 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+ 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+ 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+ 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+ 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+ 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+ 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+ 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+ 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+ 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+ 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+ 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+ 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+ 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+ 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+ 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+ 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+ 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+ 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+ 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+ 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+ 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+ 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+ 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+ 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+ 0xde0506f1UL
+ },
+ {
+ 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+ 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+ 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+ 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+ 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+ 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+ 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+ 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+ 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+ 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+ 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+ 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+ 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+ 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+ 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+ 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+ 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+ 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+ 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+ 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+ 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+ 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+ 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+ 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+ 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+ 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+ 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+ 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+ 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+ 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+ 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+ 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+ 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+ 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+ 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+ 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+ 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+ 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+ 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+ 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+ 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+ 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+ 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+ 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+ 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+ 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+ 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+ 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+ 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+ 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+ 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+ 0x8def022dUL
+ },
+ {
+ 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+ 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+ 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+ 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+ 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+ 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+ 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+ 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+ 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+ 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+ 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+ 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+ 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+ 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+ 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+ 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+ 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+ 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+ 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+ 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+ 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+ 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+ 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+ 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+ 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+ 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+ 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+ 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+ 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+ 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+ 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+ 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+ 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+ 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+ 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+ 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+ 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+ 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+ 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+ 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+ 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+ 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+ 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+ 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+ 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+ 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+ 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+ 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+ 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+ 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+ 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+ 0x72fd2493UL
+ },
+ {
+ 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+ 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+ 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+ 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+ 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+ 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+ 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+ 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+ 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+ 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+ 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+ 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+ 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+ 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+ 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+ 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+ 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+ 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+ 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+ 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+ 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+ 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+ 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+ 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+ 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+ 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+ 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+ 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+ 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+ 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+ 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+ 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+ 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+ 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+ 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+ 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+ 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+ 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+ 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+ 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+ 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+ 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+ 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+ 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+ 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+ 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+ 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+ 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+ 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+ 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+ 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+ 0xed3498beUL
+ },
+ {
+ 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+ 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+ 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+ 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+ 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+ 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+ 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+ 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+ 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+ 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+ 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+ 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+ 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+ 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+ 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+ 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+ 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+ 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+ 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+ 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+ 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+ 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+ 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+ 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+ 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+ 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+ 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+ 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+ 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+ 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+ 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+ 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+ 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+ 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+ 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+ 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+ 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+ 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+ 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+ 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+ 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+ 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+ 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+ 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+ 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+ 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+ 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+ 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+ 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+ 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+ 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+ 0xf10605deUL
+#endif
+ }
+};
Added: llvm-gcc-4.2/trunk/zlib/deflate.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/deflate.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/deflate.c (added)
+++ llvm-gcc-4.2/trunk/zlib/deflate.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1736 @@
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process depends on being able to identify portions
+ * of the input text which are identical to earlier input (within a
+ * sliding window trailing behind the input currently being processed).
+ *
+ * The most straightforward technique turns out to be the fastest for
+ * most input files: try all possible matches and select the longest.
+ * The key feature of this algorithm is that insertions into the string
+ * dictionary are very simple and thus fast, and deletions are avoided
+ * completely. Insertions are performed at each input character, whereas
+ * string matches are performed only when the previous match ends. So it
+ * is preferable to spend more time in matches to allow very fast string
+ * insertions and avoid deletions. The matching algorithm for small
+ * strings is inspired from that of Rabin & Karp. A brute force approach
+ * is used to find longer strings when a small match has been found.
+ * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ * (by Leonid Broukhis).
+ * A previous version of this file used a more sophisticated algorithm
+ * (by Fiala and Greene) which is guaranteed to run in linear amortized
+ * time, but has a larger average cost, uses more memory and is patented.
+ * However the F&G algorithm may be faster for some highly redundant
+ * files if the parameter max_chain_length (described below) is too large.
+ *
+ * ACKNOWLEDGEMENTS
+ *
+ * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ * I found it in 'freeze' written by Leonid Broukhis.
+ * Thanks to many people for bug reports and testing.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ * Available in http://www.ietf.org/rfc/rfc1951.txt
+ *
+ * A description of the Rabin and Karp algorithm is given in the book
+ * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ * Fiala,E.R., and Greene,D.H.
+ * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id: deflate.c,v 1.1.1.2 2002/03/11 21:53:23 tromey Exp $ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+ " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ * Function prototypes.
+ */
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast OF((deflate_state *s, int flush));
+#ifndef FASTEST
+local block_state deflate_slow OF((deflate_state *s, int flush));
+#endif
+local void lm_init OF((deflate_state *s));
+local void putShortMSB OF((deflate_state *s, uInt b));
+local void flush_pending OF((z_streamp strm));
+local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifndef FASTEST
+#ifdef ASMV
+ void match_init OF((void)); /* asm code initialization */
+ uInt longest_match OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match OF((deflate_state *s, IPos cur_match));
+#endif
+#endif
+local uInt longest_match_fast OF((deflate_state *s, IPos cur_match));
+
+#ifdef DEBUG
+local void check_match OF((deflate_state *s, IPos start, IPos match,
+ int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+# define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+ ush good_length; /* reduce lazy search above this match length */
+ ush max_lazy; /* do not perform lazy search above this match length */
+ ush nice_length; /* quit search above this match length */
+ ush max_chain;
+ compress_func func;
+} config;
+
+#ifdef FASTEST
+local const config configuration_table[2] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
+#else
+local const config configuration_table[10] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
+/* 2 */ {4, 5, 16, 8, deflate_fast},
+/* 3 */ {4, 6, 32, 32, deflate_fast},
+
+/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
+/* 5 */ {8, 16, 32, 32, deflate_slow},
+/* 6 */ {8, 16, 128, 128, deflate_slow},
+/* 7 */ {8, 32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
+#endif
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+#ifndef NO_DUMMY_DECL
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+#endif
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of str are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+ s->head[s->hash_size-1] = NIL; \
+ zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+ z_streamp strm;
+ int level;
+ const char *version;
+ int stream_size;
+{
+ return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+ Z_DEFAULT_STRATEGY, version, stream_size);
+ /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ version, stream_size)
+ z_streamp strm;
+ int level;
+ int method;
+ int windowBits;
+ int memLevel;
+ int strategy;
+ const char *version;
+ int stream_size;
+{
+ deflate_state *s;
+ int wrap = 1;
+ static const char my_version[] = ZLIB_VERSION;
+
+ ushf *overlay;
+ /* We overlay pending_buf and d_buf+l_buf. This works since the average
+ * output size for (length,distance) codes is <= 24 bits.
+ */
+
+ if (version == Z_NULL || version[0] != my_version[0] ||
+ stream_size != sizeof(z_stream)) {
+ return Z_VERSION_ERROR;
+ }
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+ strm->msg = Z_NULL;
+ if (strm->zalloc == (alloc_func)0) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+
+ if (windowBits < 0) { /* suppress zlib wrapper */
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+#ifdef GZIP
+ else if (windowBits > 15) {
+ wrap = 2; /* write gzip wrapper instead */
+ windowBits -= 16;
+ }
+#endif
+ if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+ windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+ strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
+ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+ if (s == Z_NULL) return Z_MEM_ERROR;
+ strm->state = (struct internal_state FAR *)s;
+ s->strm = strm;
+
+ s->wrap = wrap;
+ s->gzhead = Z_NULL;
+ s->w_bits = windowBits;
+ s->w_size = 1 << s->w_bits;
+ s->w_mask = s->w_size - 1;
+
+ s->hash_bits = memLevel + 7;
+ s->hash_size = 1 << s->hash_bits;
+ s->hash_mask = s->hash_size - 1;
+ s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+ s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+ s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
+ s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+ s->pending_buf = (uchf *) overlay;
+ s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+ if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+ s->pending_buf == Z_NULL) {
+ s->status = FINISH_STATE;
+ strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
+ deflateEnd (strm);
+ return Z_MEM_ERROR;
+ }
+ s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+ s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+ s->level = level;
+ s->strategy = strategy;
+ s->method = (Byte)method;
+
+ return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+ z_streamp strm;
+ const Bytef *dictionary;
+ uInt dictLength;
+{
+ deflate_state *s;
+ uInt length = dictLength;
+ uInt n;
+ IPos hash_head = 0;
+
+ if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
+ strm->state->wrap == 2 ||
+ (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
+ return Z_STREAM_ERROR;
+
+ s = strm->state;
+ if (s->wrap)
+ strm->adler = adler32(strm->adler, dictionary, dictLength);
+
+ if (length < MIN_MATCH) return Z_OK;
+ if (length > MAX_DIST(s)) {
+ length = MAX_DIST(s);
+ dictionary += dictLength - length; /* use the tail of the dictionary */
+ }
+ zmemcpy(s->window, dictionary, length);
+ s->strstart = length;
+ s->block_start = (long)length;
+
+ /* Insert all strings in the hash table (except for the last two bytes).
+ * s->lookahead stays null, so s->ins_h will be recomputed at the next
+ * call of fill_window.
+ */
+ s->ins_h = s->window[0];
+ UPDATE_HASH(s, s->ins_h, s->window[1]);
+ for (n = 0; n <= length - MIN_MATCH; n++) {
+ INSERT_STRING(s, n, hash_head);
+ }
+ if (hash_head) hash_head = 0; /* to make compiler happy */
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+ z_streamp strm;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
+ return Z_STREAM_ERROR;
+ }
+
+ strm->total_in = strm->total_out = 0;
+ strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+ strm->data_type = Z_UNKNOWN;
+
+ s = (deflate_state *)strm->state;
+ s->pending = 0;
+ s->pending_out = s->pending_buf;
+
+ if (s->wrap < 0) {
+ s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
+ }
+ s->status = s->wrap ? INIT_STATE : BUSY_STATE;
+ strm->adler =
+#ifdef GZIP
+ s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
+#endif
+ adler32(0L, Z_NULL, 0);
+ s->last_flush = Z_NO_FLUSH;
+
+ _tr_init(s);
+ lm_init(s);
+
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+ z_streamp strm;
+ gz_headerp head;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+ strm->state->gzhead = head;
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflatePrime (strm, bits, value)
+ z_streamp strm;
+ int bits;
+ int value;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ strm->state->bi_valid = bits;
+ strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+ z_streamp strm;
+ int level;
+ int strategy;
+{
+ deflate_state *s;
+ compress_func func;
+ int err = Z_OK;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+
+#ifdef FASTEST
+ if (level != 0) level = 1;
+#else
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#endif
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
+ return Z_STREAM_ERROR;
+ }
+ func = configuration_table[s->level].func;
+
+ if (func != configuration_table[level].func && strm->total_in != 0) {
+ /* Flush the last buffer: */
+ err = deflate(strm, Z_PARTIAL_FLUSH);
+ }
+ if (s->level != level) {
+ s->level = level;
+ s->max_lazy_match = configuration_table[level].max_lazy;
+ s->good_match = configuration_table[level].good_length;
+ s->nice_match = configuration_table[level].nice_length;
+ s->max_chain_length = configuration_table[level].max_chain;
+ }
+ s->strategy = strategy;
+ return err;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+ z_streamp strm;
+ int good_length;
+ int max_lazy;
+ int nice_length;
+ int max_chain;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ s->good_match = good_length;
+ s->max_lazy_match = max_lazy;
+ s->nice_match = nice_length;
+ s->max_chain_length = max_chain;
+ return Z_OK;
+}
+
+/* =========================================================================
+ * For the default windowBits of 15 and memLevel of 8, this function returns
+ * a close to exact, as well as small, upper bound on the compressed size.
+ * They are coded as constants here for a reason--if the #define's are
+ * changed, then this function needs to be changed as well. The return
+ * value for 15 and 8 only works for those exact settings.
+ *
+ * For any setting other than those defaults for windowBits and memLevel,
+ * the value returned is a conservative worst case for the maximum expansion
+ * resulting from using fixed blocks instead of stored blocks, which deflate
+ * can emit on compressed data for some combinations of the parameters.
+ *
+ * This function could be more sophisticated to provide closer upper bounds
+ * for every combination of windowBits and memLevel, as well as wrap.
+ * But even the conservative upper bound of about 14% expansion does not
+ * seem onerous for output buffer allocation.
+ */
+uLong ZEXPORT deflateBound(strm, sourceLen)
+ z_streamp strm;
+ uLong sourceLen;
+{
+ deflate_state *s;
+ uLong destLen;
+
+ /* conservative upper bound */
+ destLen = sourceLen +
+ ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11;
+
+ /* if can't get parameters, return conservative bound */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return destLen;
+
+ /* if not default parameters, return conservative bound */
+ s = strm->state;
+ if (s->w_bits != 15 || s->hash_bits != 8 + 7)
+ return destLen;
+
+ /* default settings: return tight bound for that case */
+ return compressBound(sourceLen);
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+ deflate_state *s;
+ uInt b;
+{
+ put_byte(s, (Byte)(b >> 8));
+ put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+ z_streamp strm;
+{
+ unsigned len = strm->state->pending;
+
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ zmemcpy(strm->next_out, strm->state->pending_out, len);
+ strm->next_out += len;
+ strm->state->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ strm->state->pending -= len;
+ if (strm->state->pending == 0) {
+ strm->state->pending_out = strm->state->pending_buf;
+ }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+ z_streamp strm;
+ int flush;
+{
+ int old_flush; /* value of flush param for previous deflate call */
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ flush > Z_FINISH || flush < 0) {
+ return Z_STREAM_ERROR;
+ }
+ s = strm->state;
+
+ if (strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+ (s->status == FINISH_STATE && flush != Z_FINISH)) {
+ ERR_RETURN(strm, Z_STREAM_ERROR);
+ }
+ if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+ s->strm = strm; /* just in case */
+ old_flush = s->last_flush;
+ s->last_flush = flush;
+
+ /* Write the header */
+ if (s->status == INIT_STATE) {
+#ifdef GZIP
+ if (s->wrap == 2) {
+ strm->adler = crc32(0L, Z_NULL, 0);
+ put_byte(s, 31);
+ put_byte(s, 139);
+ put_byte(s, 8);
+ if (s->gzhead == NULL) {
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, OS_CODE);
+ s->status = BUSY_STATE;
+ }
+ else {
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
+ (s->gzhead->hcrc ? 2 : 0) +
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
+ );
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, s->gzhead->os & 0xff);
+ if (s->gzhead->extra != NULL) {
+ put_byte(s, s->gzhead->extra_len & 0xff);
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+ }
+ if (s->gzhead->hcrc)
+ strm->adler = crc32(strm->adler, s->pending_buf,
+ s->pending);
+ s->gzindex = 0;
+ s->status = EXTRA_STATE;
+ }
+ }
+ else
+#endif
+ {
+ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+ uInt level_flags;
+
+ if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
+ level_flags = 0;
+ else if (s->level < 6)
+ level_flags = 1;
+ else if (s->level == 6)
+ level_flags = 2;
+ else
+ level_flags = 3;
+ header |= (level_flags << 6);
+ if (s->strstart != 0) header |= PRESET_DICT;
+ header += 31 - (header % 31);
+
+ s->status = BUSY_STATE;
+ putShortMSB(s, header);
+
+ /* Save the adler32 of the preset dictionary: */
+ if (s->strstart != 0) {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ strm->adler = adler32(0L, Z_NULL, 0);
+ }
+ }
+#ifdef GZIP
+ if (s->status == EXTRA_STATE) {
+ if (s->gzhead->extra != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size)
+ break;
+ }
+ put_byte(s, s->gzhead->extra[s->gzindex]);
+ s->gzindex++;
+ }
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (s->gzindex == s->gzhead->extra_len) {
+ s->gzindex = 0;
+ s->status = NAME_STATE;
+ }
+ }
+ else
+ s->status = NAME_STATE;
+ }
+ if (s->status == NAME_STATE) {
+ if (s->gzhead->name != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->name[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0) {
+ s->gzindex = 0;
+ s->status = COMMENT_STATE;
+ }
+ }
+ else
+ s->status = COMMENT_STATE;
+ }
+ if (s->status == COMMENT_STATE) {
+ if (s->gzhead->comment != NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->comment[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0)
+ s->status = HCRC_STATE;
+ }
+ else
+ s->status = HCRC_STATE;
+ }
+ if (s->status == HCRC_STATE) {
+ if (s->gzhead->hcrc) {
+ if (s->pending + 2 > s->pending_buf_size)
+ flush_pending(strm);
+ if (s->pending + 2 <= s->pending_buf_size) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ strm->adler = crc32(0L, Z_NULL, 0);
+ s->status = BUSY_STATE;
+ }
+ }
+ else
+ s->status = BUSY_STATE;
+ }
+#endif
+
+ /* Flush as much pending output as possible */
+ if (s->pending != 0) {
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ /* Since avail_out is 0, deflate will be called again with
+ * more output space, but possibly with both pending and
+ * avail_in equal to zero. There won't be anything to do,
+ * but this is not an error situation so make sure we
+ * return OK instead of BUF_ERROR at next call of deflate:
+ */
+ s->last_flush = -1;
+ return Z_OK;
+ }
+
+ /* Make sure there is something to do and avoid duplicate consecutive
+ * flushes. For repeated and useless calls with Z_FINISH, we keep
+ * returning Z_STREAM_END instead of Z_BUF_ERROR.
+ */
+ } else if (strm->avail_in == 0 && flush <= old_flush &&
+ flush != Z_FINISH) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* User must not provide more input after the first FINISH: */
+ if (s->status == FINISH_STATE && strm->avail_in != 0) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* Start a new block or continue the current one.
+ */
+ if (strm->avail_in != 0 || s->lookahead != 0 ||
+ (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+ block_state bstate;
+
+ bstate = (*(configuration_table[s->level].func))(s, flush);
+
+ if (bstate == finish_started || bstate == finish_done) {
+ s->status = FINISH_STATE;
+ }
+ if (bstate == need_more || bstate == finish_started) {
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+ }
+ return Z_OK;
+ /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+ * of deflate should use the same flush parameter to make sure
+ * that the flush is complete. So we don't have to output an
+ * empty block here, this will be done at next call. This also
+ * ensures that for a very small output buffer, we emit at most
+ * one empty block.
+ */
+ }
+ if (bstate == block_done) {
+ if (flush == Z_PARTIAL_FLUSH) {
+ _tr_align(s);
+ } else { /* FULL_FLUSH or SYNC_FLUSH */
+ _tr_stored_block(s, (char*)0, 0L, 0);
+ /* For a full flush, this empty block will be recognized
+ * as a special marker by inflate_sync().
+ */
+ if (flush == Z_FULL_FLUSH) {
+ CLEAR_HASH(s); /* forget history */
+ }
+ }
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+ return Z_OK;
+ }
+ }
+ }
+ Assert(strm->avail_out > 0, "bug2");
+
+ if (flush != Z_FINISH) return Z_OK;
+ if (s->wrap <= 0) return Z_STREAM_END;
+
+ /* Write the trailer */
+#ifdef GZIP
+ if (s->wrap == 2) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
+ put_byte(s, (Byte)(strm->total_in & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
+ put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
+ }
+ else
+#endif
+ {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ flush_pending(strm);
+ /* If avail_out is zero, the application will call deflate again
+ * to flush the rest.
+ */
+ if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
+ return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+ z_streamp strm;
+{
+ int status;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+ status = strm->state->status;
+ if (status != INIT_STATE &&
+ status != EXTRA_STATE &&
+ status != NAME_STATE &&
+ status != COMMENT_STATE &&
+ status != HCRC_STATE &&
+ status != BUSY_STATE &&
+ status != FINISH_STATE) {
+ return Z_STREAM_ERROR;
+ }
+
+ /* Deallocate in reverse order of allocations: */
+ TRY_FREE(strm, strm->state->pending_buf);
+ TRY_FREE(strm, strm->state->head);
+ TRY_FREE(strm, strm->state->prev);
+ TRY_FREE(strm, strm->state->window);
+
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+
+ return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+ z_streamp dest;
+ z_streamp source;
+{
+#ifdef MAXSEG_64K
+ return Z_STREAM_ERROR;
+#else
+ deflate_state *ds;
+ deflate_state *ss;
+ ushf *overlay;
+
+
+ if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+ return Z_STREAM_ERROR;
+ }
+
+ ss = source->state;
+
+ zmemcpy(dest, source, sizeof(z_stream));
+
+ ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+ if (ds == Z_NULL) return Z_MEM_ERROR;
+ dest->state = (struct internal_state FAR *) ds;
+ zmemcpy(ds, ss, sizeof(deflate_state));
+ ds->strm = dest;
+
+ ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+ ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
+ ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
+ overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+ ds->pending_buf = (uchf *) overlay;
+
+ if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+ ds->pending_buf == Z_NULL) {
+ deflateEnd (dest);
+ return Z_MEM_ERROR;
+ }
+ /* following zmemcpy do not work for 16-bit MSDOS */
+ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+ zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+ zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+ zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+ ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+ ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+ ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+ ds->l_desc.dyn_tree = ds->dyn_ltree;
+ ds->d_desc.dyn_tree = ds->dyn_dtree;
+ ds->bl_desc.dyn_tree = ds->bl_tree;
+
+ return Z_OK;
+#endif /* MAXSEG_64K */
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read. All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+ z_streamp strm;
+ Bytef *buf;
+ unsigned size;
+{
+ unsigned len = strm->avail_in;
+
+ if (len > size) len = size;
+ if (len == 0) return 0;
+
+ strm->avail_in -= len;
+
+ if (strm->state->wrap == 1) {
+ strm->adler = adler32(strm->adler, strm->next_in, len);
+ }
+#ifdef GZIP
+ else if (strm->state->wrap == 2) {
+ strm->adler = crc32(strm->adler, strm->next_in, len);
+ }
+#endif
+ zmemcpy(buf, strm->next_in, len);
+ strm->next_in += len;
+ strm->total_in += len;
+
+ return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+ deflate_state *s;
+{
+ s->window_size = (ulg)2L*s->w_size;
+
+ CLEAR_HASH(s);
+
+ /* Set the default configuration parameters:
+ */
+ s->max_lazy_match = configuration_table[s->level].max_lazy;
+ s->good_match = configuration_table[s->level].good_length;
+ s->nice_match = configuration_table[s->level].nice_length;
+ s->max_chain_length = configuration_table[s->level].max_chain;
+
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->lookahead = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ s->ins_h = 0;
+#ifndef FASTEST
+#ifdef ASMV
+ match_init(); /* initialize the asm code */
+#endif
+#endif
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ unsigned chain_length = s->max_chain_length;/* max hash chain length */
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ int best_len = s->prev_length; /* best match length so far */
+ int nice_match = s->nice_match; /* stop if match long enough */
+ IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+ s->strstart - (IPos)MAX_DIST(s) : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+ Posf *prev = s->prev;
+ uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+ /* Compare two bytes at a time. Note: this is not always beneficial.
+ * Try with and without -DUNALIGNED_OK to check.
+ */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+ register ush scan_start = *(ushf*)scan;
+ register ush scan_end = *(ushf*)(scan+best_len-1);
+#else
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+ register Byte scan_end1 = scan[best_len-1];
+ register Byte scan_end = scan[best_len];
+#endif
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ /* Do not waste too much time if we already have a good match: */
+ if (s->prev_length >= s->good_match) {
+ chain_length >>= 2;
+ }
+ /* Do not look for matches beyond the end of the input. This is necessary
+ * to make deflate deterministic.
+ */
+ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ do {
+ Assert(cur_match < s->strstart, "no future");
+ match = s->window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2. Note that the checks below
+ * for insufficient lookahead only occur occasionally for performance
+ * reasons. Therefore uninitialized memory will be accessed, and
+ * conditional jumps will be made that depend on those values.
+ * However the length of the match is limited to the lookahead, so
+ * the output of deflate is not affected by the uninitialized values.
+ */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+ /* This code assumes sizeof(unsigned short) == 2. Do not use
+ * UNALIGNED_OK if your compiler uses a different size.
+ */
+ if (*(ushf*)(match+best_len-1) != scan_end ||
+ *(ushf*)match != scan_start) continue;
+
+ /* It is not necessary to compare scan[2] and match[2] since they are
+ * always equal when the other bytes match, given that the hash keys
+ * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+ * strstart+3, +5, ... up to strstart+257. We check for insufficient
+ * lookahead only every 4th comparison; the 128th check will be made
+ * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+ * necessary to put more guard bytes at the end of the window, or
+ * to check more often for insufficient lookahead.
+ */
+ Assert(scan[2] == match[2], "scan[2]?");
+ scan++, match++;
+ do {
+ } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ scan < strend);
+ /* The funny "do {}" generates better code on most compilers */
+
+ /* Here, scan <= window+strstart+257 */
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+ if (*scan == *match) scan++;
+
+ len = (MAX_MATCH - 1) - (int)(strend-scan);
+ scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+ if (len > best_len) {
+ s->match_start = cur_match;
+ best_len = len;
+ if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+ scan_end = *(ushf*)(scan+best_len-1);
+#else
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+#endif
+ }
+ } while ((cur_match = prev[cur_match & wmask]) > limit
+ && --chain_length != 0);
+
+ if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+ return s->lookahead;
+}
+#endif /* ASMV */
+#endif /* FASTEST */
+
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 or strategy == Z_RLE only
+ */
+local uInt longest_match_fast(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ Assert(cur_match < s->strstart, "no future");
+
+ match = s->window + cur_match;
+
+ /* Return failure if the match length is less than 2:
+ */
+ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match += 2;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+
+ if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+ s->match_start = cur_match;
+ return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
+}
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+ deflate_state *s;
+ IPos start, match;
+ int length;
+{
+ /* check that the match is indeed a match */
+ if (zmemcmp(s->window + match,
+ s->window + start, length) != EQUAL) {
+ fprintf(stderr, " start %u, match %u, length %d\n",
+ start, match, length);
+ do {
+ fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+ } while (--length != 0);
+ z_error("invalid match");
+ }
+ if (z_verbose > 1) {
+ fprintf(stderr,"\\[%d,%d]", start-match, length);
+ do { putc(s->window[start++], stderr); } while (--length != 0);
+ }
+}
+#else
+# define check_match(s, start, match, length)
+#endif /* DEBUG */
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or avail_in == 0; reads are
+ * performed for at least two bytes (required for the zip translate_eol
+ * option -- not supported here).
+ */
+local void fill_window(s)
+ deflate_state *s;
+{
+ register unsigned n, m;
+ register Posf *p;
+ unsigned more; /* Amount of free space at the end of the window. */
+ uInt wsize = s->w_size;
+
+ do {
+ more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+ /* Deal with !@#$% 64K limit: */
+ if (sizeof(int) <= 2) {
+ if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+ more = wsize;
+
+ } else if (more == (unsigned)(-1)) {
+ /* Very unlikely, but possible on 16 bit machine if
+ * strstart == 0 && lookahead == 1 (input done a byte at time)
+ */
+ more--;
+ }
+ }
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ if (s->strstart >= wsize+MAX_DIST(s)) {
+
+ zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+ s->match_start -= wsize;
+ s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
+ s->block_start -= (long) wsize;
+
+ /* Slide the hash table (could be avoided with 32 bit values
+ at the expense of memory usage). We slide even when level == 0
+ to keep the hash table consistent if we switch back to level > 0
+ later. (Using level 0 permanently is not an optimal usage of
+ zlib, so we don't care about this pathological case.)
+ */
+ /* %%% avoid this when Z_RLE */
+ n = s->hash_size;
+ p = &s->head[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ } while (--n);
+
+ n = wsize;
+#ifndef FASTEST
+ p = &s->prev[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ } while (--n);
+#endif
+ more += wsize;
+ }
+ if (s->strm->avail_in == 0) return;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the BIG_MEM or MMAP case (not yet supported),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(more >= 2, "more < 2");
+
+ n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+ s->lookahead += n;
+
+ /* Initialize the hash value now that we have some input: */
+ if (s->lookahead >= MIN_MATCH) {
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ }
+ /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+ * but this is not important since only literal bytes will be emitted.
+ */
+
+ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, eof) { \
+ _tr_flush_block(s, (s->block_start >= 0L ? \
+ (charf *)&s->window[(unsigned)s->block_start] : \
+ (charf *)Z_NULL), \
+ (ulg)((long)s->strstart - s->block_start), \
+ (eof)); \
+ s->block_start = s->strstart; \
+ flush_pending(s->strm); \
+ Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, eof) { \
+ FLUSH_BLOCK_ONLY(s, eof); \
+ if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+ * to pending_buf_size, and each stored block has a 5 byte header:
+ */
+ ulg max_block_size = 0xffff;
+ ulg max_start;
+
+ if (max_block_size > s->pending_buf_size - 5) {
+ max_block_size = s->pending_buf_size - 5;
+ }
+
+ /* Copy as much as possible from input to output: */
+ for (;;) {
+ /* Fill the window as much as possible: */
+ if (s->lookahead <= 1) {
+
+ Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+ s->block_start >= (long)s->w_size, "slide too late");
+
+ fill_window(s);
+ if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+ Assert(s->block_start >= 0L, "block gone");
+
+ s->strstart += s->lookahead;
+ s->lookahead = 0;
+
+ /* Emit a stored block if pending_buf will be full: */
+ max_start = s->block_start + max_block_size;
+ if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+ /* strstart == 0 is possible when wraparound on 16-bit machine */
+ s->lookahead = (uInt)(s->strstart - max_start);
+ s->strstart = (uInt)max_start;
+ FLUSH_BLOCK(s, 0);
+ }
+ /* Flush if we may have to slide, otherwise block_start may become
+ * negative and the data will be gone:
+ */
+ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+ FLUSH_BLOCK(s, 0);
+ }
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head = NIL; /* head of the hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+#ifdef FASTEST
+ if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) ||
+ (s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
+ s->match_length = longest_match_fast (s, hash_head);
+ }
+#else
+ if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
+ s->match_length = longest_match (s, hash_head);
+ } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
+ s->match_length = longest_match_fast (s, hash_head);
+ }
+#endif
+ /* longest_match() or longest_match_fast() sets match_start */
+ }
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->match_start, s->match_length);
+
+ _tr_tally_dist(s, s->strstart - s->match_start,
+ s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+#ifndef FASTEST
+ if (s->match_length <= s->max_insert_length &&
+ s->lookahead >= MIN_MATCH) {
+ s->match_length--; /* string at strstart already in table */
+ do {
+ s->strstart++;
+ INSERT_STRING(s, s->strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--s->match_length != 0);
+ s->strstart++;
+ } else
+#endif
+ {
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+ * matter since it will be recomputed at next deflate call.
+ */
+ }
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+
+#ifndef FASTEST
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head = NIL; /* head of hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ /* Process the input block. */
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ */
+ s->prev_length = s->match_length, s->prev_match = s->match_start;
+ s->match_length = MIN_MATCH-1;
+
+ if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+ s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
+ s->match_length = longest_match (s, hash_head);
+ } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
+ s->match_length = longest_match_fast (s, hash_head);
+ }
+ /* longest_match() or longest_match_fast() sets match_start */
+
+ if (s->match_length <= 5 && (s->strategy == Z_FILTERED
+#if TOO_FAR <= 32767
+ || (s->match_length == MIN_MATCH &&
+ s->strstart - s->match_start > TOO_FAR)
+#endif
+ )) {
+
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ s->match_length = MIN_MATCH-1;
+ }
+ }
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+ uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+ /* Do not insert strings in hash table beyond this. */
+
+ check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+ _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+ s->prev_length - MIN_MATCH, bflush);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted. If there is not
+ * enough lookahead, the last two strings are not inserted in
+ * the hash table.
+ */
+ s->lookahead -= s->prev_length-1;
+ s->prev_length -= 2;
+ do {
+ if (++s->strstart <= max_insert) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+ } while (--s->prev_length != 0);
+ s->match_available = 0;
+ s->match_length = MIN_MATCH-1;
+ s->strstart++;
+
+ if (bflush) FLUSH_BLOCK(s, 0);
+
+ } else if (s->match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ if (bflush) {
+ FLUSH_BLOCK_ONLY(s, 0);
+ }
+ s->strstart++;
+ s->lookahead--;
+ if (s->strm->avail_out == 0) return need_more;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ s->match_available = 1;
+ s->strstart++;
+ s->lookahead--;
+ }
+ }
+ Assert (flush != Z_NO_FLUSH, "no flush?");
+ if (s->match_available) {
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ s->match_available = 0;
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+#endif /* FASTEST */
+
+#if 0
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt run; /* length of run */
+ uInt max; /* maximum length of run */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan; /* scan for end of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest encodable run.
+ */
+ if (s->lookahead < MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ run = 0;
+ if (s->strstart > 0) { /* if there is a previous byte, that is */
+ max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
+ scan = s->window + s->strstart - 1;
+ prev = *scan++;
+ do {
+ if (*scan++ != prev)
+ break;
+ } while (++run < max);
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (run >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, run);
+ _tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
+ s->lookahead -= run;
+ s->strstart += run;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+#endif
Added: llvm-gcc-4.2/trunk/zlib/deflate.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/deflate.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/deflate.h (added)
+++ llvm-gcc-4.2/trunk/zlib/deflate.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,331 @@
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2004 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: deflate.h,v 1.1.1.2 2002/03/11 21:53:23 tromey Exp $ */
+
+#ifndef DEFLATE_H
+#define DEFLATE_H
+
+#include "zutil.h"
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer creation by deflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip encoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GZIP
+#endif
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS 256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES 30
+/* number of distance codes */
+
+#define BL_CODES 19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE 42
+#define EXTRA_STATE 69
+#define NAME_STATE 73
+#define COMMENT_STATE 91
+#define HCRC_STATE 103
+#define BUSY_STATE 113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+ union {
+ ush freq; /* frequency count */
+ ush code; /* bit string */
+ } fc;
+ union {
+ ush dad; /* father node in Huffman tree */
+ ush len; /* length of bit string */
+ } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad dl.dad
+#define Len dl.len
+
+typedef struct static_tree_desc_s static_tree_desc;
+
+typedef struct tree_desc_s {
+ ct_data *dyn_tree; /* the dynamic tree */
+ int max_code; /* largest code with non zero frequency */
+ static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ int status; /* as the name implies */
+ Bytef *pending_buf; /* output still pending */
+ ulg pending_buf_size; /* size of pending_buf */
+ Bytef *pending_out; /* next pending byte to output to the stream */
+ uInt pending; /* nb of bytes in the pending buffer */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ gz_headerp gzhead; /* gzip header information to write */
+ uInt gzindex; /* where in extra, name, or comment */
+ Byte method; /* STORED (for zip only) or DEFLATED */
+ int last_flush; /* value of flush param for previous deflate call */
+
+ /* used by deflate.c: */
+
+ uInt w_size; /* LZ77 window size (32K by default) */
+ uInt w_bits; /* log2(w_size) (8..16) */
+ uInt w_mask; /* w_size - 1 */
+
+ Bytef *window;
+ /* Sliding window. Input bytes are read into the second half of the window,
+ * and move to the first half later to keep a dictionary of at least wSize
+ * bytes. With this organization, matches are limited to a distance of
+ * wSize-MAX_MATCH bytes, but this ensures that IO is always
+ * performed with a length multiple of the block size. Also, it limits
+ * the window size to 64K, which is quite useful on MSDOS.
+ * To do: use the user input buffer as sliding window.
+ */
+
+ ulg window_size;
+ /* Actual size of window: 2*wSize, except when the user input buffer
+ * is directly used as sliding window.
+ */
+
+ Posf *prev;
+ /* Link to older string with same hash index. To limit the size of this
+ * array to 64K, this link is maintained only for the last 32K strings.
+ * An index in this array is thus a window index modulo 32K.
+ */
+
+ Posf *head; /* Heads of the hash chains or NIL. */
+
+ uInt ins_h; /* hash index of string to be inserted */
+ uInt hash_size; /* number of elements in hash table */
+ uInt hash_bits; /* log2(hash_size) */
+ uInt hash_mask; /* hash_size-1 */
+
+ uInt hash_shift;
+ /* Number of bits by which ins_h must be shifted at each input
+ * step. It must be such that after MIN_MATCH steps, the oldest
+ * byte no longer takes part in the hash key, that is:
+ * hash_shift * MIN_MATCH >= hash_bits
+ */
+
+ long block_start;
+ /* Window position at the beginning of the current output block. Gets
+ * negative when the window is moved backwards.
+ */
+
+ uInt match_length; /* length of best match */
+ IPos prev_match; /* previous match */
+ int match_available; /* set if previous match exists */
+ uInt strstart; /* start of string to insert */
+ uInt match_start; /* start of matching string */
+ uInt lookahead; /* number of valid bytes ahead in window */
+
+ uInt prev_length;
+ /* Length of the best match at previous step. Matches not greater than this
+ * are discarded. This is used in the lazy match evaluation.
+ */
+
+ uInt max_chain_length;
+ /* To speed up deflation, hash chains are never searched beyond this
+ * length. A higher limit improves compression ratio but degrades the
+ * speed.
+ */
+
+ uInt max_lazy_match;
+ /* Attempt to find a better match only when the current match is strictly
+ * smaller than this value. This mechanism is used only for compression
+ * levels >= 4.
+ */
+# define max_insert_length max_lazy_match
+ /* Insert new strings in the hash table only if the match length is not
+ * greater than this length. This saves time but degrades compression.
+ * max_insert_length is used only for compression levels <= 3.
+ */
+
+ int level; /* compression level (1..9) */
+ int strategy; /* favor or force Huffman coding*/
+
+ uInt good_match;
+ /* Use a faster search when the previous match is longer than this */
+
+ int nice_match; /* Stop searching when current match exceeds this */
+
+ /* used by trees.c: */
+ /* Didn't use ct_data typedef below to supress compiler warning */
+ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
+ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
+
+ struct tree_desc_s l_desc; /* desc. for literal tree */
+ struct tree_desc_s d_desc; /* desc. for distance tree */
+ struct tree_desc_s bl_desc; /* desc. for bit length tree */
+
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
+ int heap_len; /* number of elements in the heap */
+ int heap_max; /* element of largest frequency */
+ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ * The same heap array is used to build all trees.
+ */
+
+ uch depth[2*L_CODES+1];
+ /* Depth of each subtree used as tie breaker for trees of equal frequency
+ */
+
+ uchf *l_buf; /* buffer for literals or lengths */
+
+ uInt lit_bufsize;
+ /* Size of match buffer for literals/lengths. There are 4 reasons for
+ * limiting lit_bufsize to 64K:
+ * - frequencies can be kept in 16 bit counters
+ * - if compression is not successful for the first block, all input
+ * data is still in the window so we can still emit a stored block even
+ * when input comes from standard input. (This can also be done for
+ * all blocks if lit_bufsize is not greater than 32K.)
+ * - if compression is not successful for a file smaller than 64K, we can
+ * even emit a stored file instead of a stored block (saving 5 bytes).
+ * This is applicable only for zip (not gzip or zlib).
+ * - creating new Huffman trees less frequently may not provide fast
+ * adaptation to changes in the input data statistics. (Take for
+ * example a binary file with poorly compressible code followed by
+ * a highly compressible string table.) Smaller buffer sizes give
+ * fast adaptation but have of course the overhead of transmitting
+ * trees more frequently.
+ * - I can't count above 4
+ */
+
+ uInt last_lit; /* running index in l_buf */
+
+ ushf *d_buf;
+ /* Buffer for distances. To simplify the code, d_buf and l_buf have
+ * the same number of elements. To use different lengths, an extra flag
+ * array would be necessary.
+ */
+
+ ulg opt_len; /* bit length of current block with optimal trees */
+ ulg static_len; /* bit length of current block with static trees */
+ uInt matches; /* number of string matches in current block */
+ int last_eob_len; /* bit length of EOB code for last block */
+
+#ifdef DEBUG
+ ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+ ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
+#endif
+
+ ush bi_buf;
+ /* Output buffer. bits are inserted starting at the bottom (least
+ * significant bits).
+ */
+ int bi_valid;
+ /* Number of valid bits in bi_buf. All bits above the last valid bit
+ * are always zero.
+ */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+ /* in trees.c */
+void _tr_init OF((deflate_state *s));
+int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
+ int eof));
+void _tr_align OF((deflate_state *s));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+ int eof));
+
+#define d_code(dist) \
+ ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+ extern uch _length_code[];
+ extern uch _dist_code[];
+#else
+ extern const uch _length_code[];
+ extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+ { uch cc = (c); \
+ s->d_buf[s->last_lit] = 0; \
+ s->l_buf[s->last_lit++] = cc; \
+ s->dyn_ltree[cc].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+# define _tr_tally_dist(s, distance, length, flush) \
+ { uch len = (length); \
+ ush dist = (distance); \
+ s->d_buf[s->last_lit] = dist; \
+ s->l_buf[s->last_lit++] = len; \
+ dist--; \
+ s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+ s->dyn_dtree[d_code(dist)].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+ flush = _tr_tally(s, distance, length)
+#endif
+
+#endif /* DEFLATE_H */
Added: llvm-gcc-4.2/trunk/zlib/example.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/example.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/example.c (added)
+++ llvm-gcc-4.2/trunk/zlib/example.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,565 @@
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2004 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: example.c,v 1.1.1.2 2002/03/11 21:53:23 tromey Exp $ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+# define TESTFILE "foo-gz"
+#else
+# define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+ if (err != Z_OK) { \
+ fprintf(stderr, "%s error: %d\n", msg, err); \
+ exit(1); \
+ } \
+}
+
+const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+const char dictionary[] = "hello";
+uLong dictId; /* Adler32 value of the dictionary */
+
+void test_compress OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_gzio OF((const char *fname,
+ Byte *uncompr, uLong uncomprLen));
+void test_deflate OF((Byte *compr, uLong comprLen));
+void test_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_flush OF((Byte *compr, uLong *comprLen));
+void test_sync OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate OF((Byte *compr, uLong comprLen));
+void test_dict_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ err = compress(compr, &comprLen, (const Bytef*)hello, len);
+ CHECK_ERR(err, "compress");
+
+ strcpy((char*)uncompr, "garbage");
+
+ err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+ CHECK_ERR(err, "uncompress");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad uncompress\n");
+ exit(1);
+ } else {
+ printf("uncompress(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(fname, uncompr, uncomprLen)
+ const char *fname; /* compressed file name */
+ Byte *uncompr;
+ uLong uncomprLen;
+{
+#ifdef NO_GZCOMPRESS
+ fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
+#else
+ int err;
+ int len = (int)strlen(hello)+1;
+ gzFile file;
+ z_off_t pos;
+
+ file = gzopen(fname, "wb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ gzputc(file, 'h');
+ if (gzputs(file, "ello") != 4) {
+ fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (gzprintf(file, ", %s!", "hello") != 8) {
+ fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+ gzclose(file);
+
+ file = gzopen(fname, "rb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ strcpy((char*)uncompr, "garbage");
+
+ if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
+ fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+ exit(1);
+ } else {
+ printf("gzread(): %s\n", (char*)uncompr);
+ }
+
+ pos = gzseek(file, -8L, SEEK_CUR);
+ if (pos != 6 || gztell(file) != pos) {
+ fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+ (long)pos, (long)gztell(file));
+ exit(1);
+ }
+
+ if (gzgetc(file) != ' ') {
+ fprintf(stderr, "gzgetc error\n");
+ exit(1);
+ }
+
+ if (gzungetc(' ', file) != ' ') {
+ fprintf(stderr, "gzungetc error\n");
+ exit(1);
+ }
+
+ gzgets(file, (char*)uncompr, (int)uncomprLen);
+ if (strlen((char*)uncompr) != 7) { /* " hello!" */
+ fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello + 6)) {
+ fprintf(stderr, "bad gzgets after gzseek\n");
+ exit(1);
+ } else {
+ printf("gzgets() after gzseek: %s\n", (char*)uncompr);
+ }
+
+ gzclose(file);
+#endif
+}
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+
+ while (c_stream.total_in != len && c_stream.total_out < comprLen) {
+ c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ }
+ /* Finish the stream, still forcing small buffers: */
+ for (;;) {
+ c_stream.avail_out = 1;
+ err = deflate(&c_stream, Z_FINISH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "deflate");
+ }
+
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 0;
+ d_stream.next_out = uncompr;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+ d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate\n");
+ exit(1);
+ } else {
+ printf("inflate(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ /* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ */
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ if (c_stream.avail_in != 0) {
+ fprintf(stderr, "deflate not greedy\n");
+ exit(1);
+ }
+
+ /* Feed in already compressed data and switch to no compression: */
+ deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in = compr;
+ c_stream.avail_in = (uInt)comprLen/2;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ /* Switch back to compressing mode: */
+ deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ for (;;) {
+ d_stream.next_out = uncompr; /* discard the output */
+ d_stream.avail_out = (uInt)uncomprLen;
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "large inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+ fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+ exit(1);
+ } else {
+ printf("large_inflate(): OK\n");
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+ Byte *compr;
+ uLong *comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uInt len = (uInt)strlen(hello)+1;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+ c_stream.avail_in = 3;
+ c_stream.avail_out = (uInt)*comprLen;
+ err = deflate(&c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ compr[3]++; /* force an error in first compressed block */
+ c_stream.avail_in = len - 3;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ CHECK_ERR(err, "deflate");
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+
+ *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 2; /* just read the zlib header */
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ inflate(&d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "inflate");
+
+ d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
+ err = inflateSync(&d_stream); /* but skip the damaged part */
+ CHECK_ERR(err, "inflateSync");
+
+ err = inflate(&d_stream, Z_FINISH);
+ if (err != Z_DATA_ERROR) {
+ fprintf(stderr, "inflate should report DATA_ERROR\n");
+ /* Because of incorrect adler32 */
+ exit(1);
+ }
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ err = deflateSetDictionary(&c_stream,
+ (const Bytef*)dictionary, sizeof(dictionary));
+ CHECK_ERR(err, "deflateSetDictionary");
+
+ dictId = c_stream.adler;
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.avail_in = (uInt)strlen(hello)+1;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ for (;;) {
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ if (err == Z_NEED_DICT) {
+ if (d_stream.adler != dictId) {
+ fprintf(stderr, "unexpected dictionary");
+ exit(1);
+ }
+ err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+ sizeof(dictionary));
+ }
+ CHECK_ERR(err, "inflate with dict");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate with dict\n");
+ exit(1);
+ } else {
+ printf("inflate with dictionary: %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Usage: example [output.gz [input.gz]]
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ Byte *compr, *uncompr;
+ uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+ uLong uncomprLen = comprLen;
+ static const char* myVersion = ZLIB_VERSION;
+
+ if (zlibVersion()[0] != myVersion[0]) {
+ fprintf(stderr, "incompatible zlib version\n");
+ exit(1);
+
+ } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+ fprintf(stderr, "warning: different zlib version\n");
+ }
+
+ printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
+ ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
+
+ compr = (Byte*)calloc((uInt)comprLen, 1);
+ uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
+ /* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ */
+ if (compr == Z_NULL || uncompr == Z_NULL) {
+ printf("out of memory\n");
+ exit(1);
+ }
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+
+ test_gzio((argc > 1 ? argv[1] : TESTFILE),
+ uncompr, uncomprLen);
+
+ test_deflate(compr, comprLen);
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_flush(compr, &comprLen);
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ comprLen = uncomprLen;
+
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ free(compr);
+ free(uncompr);
+
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/README.examples
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/README.examples?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/README.examples (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/README.examples Thu Nov 8 16:56:19 2007
@@ -0,0 +1,42 @@
+This directory contains examples of the use of zlib.
+
+fitblk.c
+ compress just enough input to nearly fill a requested output size
+ - zlib isn't designed to do this, but fitblk does it anyway
+
+gun.c
+ uncompress a gzip file
+ - illustrates the use of inflateBack() for high speed file-to-file
+ decompression using call-back functions
+ - is approximately twice as fast as gzip -d
+ - also provides Unix uncompress functionality, again twice as fast
+
+gzappend.c
+ append to a gzip file
+ - illustrates the use of the Z_BLOCK flush parameter for inflate()
+ - illustrates the use of deflatePrime() to start at any bit
+
+gzjoin.c
+ join gzip files without recalculating the crc or recompressing
+ - illustrates the use of the Z_BLOCK flush parameter for inflate()
+ - illustrates the use of crc32_combine()
+
+gzlog.c
+gzlog.h
+ efficiently maintain a message log file in gzip format
+ - illustrates use of raw deflate and Z_SYNC_FLUSH
+ - illustrates use of gzip header extra field
+
+zlib_how.html
+ painfully comprehensive description of zpipe.c (see below)
+ - describes in excruciating detail the use of deflate() and inflate()
+
+zpipe.c
+ reads and writes zlib streams from stdin to stdout
+ - illustrates the proper use of deflate() and inflate()
+ - deeply commented in zlib_how.html (see above)
+
+zran.c
+ index a zlib or gzip stream and randomly access it
+ - illustrates the use of Z_BLOCK, inflatePrime(), and
+ inflateSetDictionary() to provide random access
Added: llvm-gcc-4.2/trunk/zlib/examples/fitblk.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/fitblk.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/fitblk.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/fitblk.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,233 @@
+/* fitblk.c: example of fitting compressed output to a specified size
+ Not copyrighted -- provided to the public domain
+ Version 1.1 25 November 2004 Mark Adler */
+
+/* Version history:
+ 1.0 24 Nov 2004 First version
+ 1.1 25 Nov 2004 Change deflateInit2() to deflateInit()
+ Use fixed-size, stack-allocated raw buffers
+ Simplify code moving compression to subroutines
+ Use assert() for internal errors
+ Add detailed description of approach
+ */
+
+/* Approach to just fitting a requested compressed size:
+
+ fitblk performs three compression passes on a portion of the input
+ data in order to determine how much of that input will compress to
+ nearly the requested output block size. The first pass generates
+ enough deflate blocks to produce output to fill the requested
+ output size plus a specfied excess amount (see the EXCESS define
+ below). The last deflate block may go quite a bit past that, but
+ is discarded. The second pass decompresses and recompresses just
+ the compressed data that fit in the requested plus excess sized
+ buffer. The deflate process is terminated after that amount of
+ input, which is less than the amount consumed on the first pass.
+ The last deflate block of the result will be of a comparable size
+ to the final product, so that the header for that deflate block and
+ the compression ratio for that block will be about the same as in
+ the final product. The third compression pass decompresses the
+ result of the second step, but only the compressed data up to the
+ requested size minus an amount to allow the compressed stream to
+ complete (see the MARGIN define below). That will result in a
+ final compressed stream whose length is less than or equal to the
+ requested size. Assuming sufficient input and a requested size
+ greater than a few hundred bytes, the shortfall will typically be
+ less than ten bytes.
+
+ If the input is short enough that the first compression completes
+ before filling the requested output size, then that compressed
+ stream is return with no recompression.
+
+ EXCESS is chosen to be just greater than the shortfall seen in a
+ two pass approach similar to the above. That shortfall is due to
+ the last deflate block compressing more efficiently with a smaller
+ header on the second pass. EXCESS is set to be large enough so
+ that there is enough uncompressed data for the second pass to fill
+ out the requested size, and small enough so that the final deflate
+ block of the second pass will be close in size to the final deflate
+ block of the third and final pass. MARGIN is chosen to be just
+ large enough to assure that the final compression has enough room
+ to complete in all cases.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include "zlib.h"
+
+#define local static
+
+/* print nastygram and leave */
+local void quit(char *why)
+{
+ fprintf(stderr, "fitblk abort: %s\n", why);
+ exit(1);
+}
+
+#define RAWLEN 4096 /* intermediate uncompressed buffer size */
+
+/* compress from file to def until provided buffer is full or end of
+ input reached; return last deflate() return value, or Z_ERRNO if
+ there was read error on the file */
+local int partcompress(FILE *in, z_streamp def)
+{
+ int ret, flush;
+ unsigned char raw[RAWLEN];
+
+ flush = Z_NO_FLUSH;
+ do {
+ def->avail_in = fread(raw, 1, RAWLEN, in);
+ if (ferror(in))
+ return Z_ERRNO;
+ def->next_in = raw;
+ if (feof(in))
+ flush = Z_FINISH;
+ ret = deflate(def, flush);
+ assert(ret != Z_STREAM_ERROR);
+ } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
+ return ret;
+}
+
+/* recompress from inf's input to def's output; the input for inf and
+ the output for def are set in those structures before calling;
+ return last deflate() return value, or Z_MEM_ERROR if inflate()
+ was not able to allocate enough memory when it needed to */
+local int recompress(z_streamp inf, z_streamp def)
+{
+ int ret, flush;
+ unsigned char raw[RAWLEN];
+
+ flush = Z_NO_FLUSH;
+ do {
+ /* decompress */
+ inf->avail_out = RAWLEN;
+ inf->next_out = raw;
+ ret = inflate(inf, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
+ ret != Z_NEED_DICT);
+ if (ret == Z_MEM_ERROR)
+ return ret;
+
+ /* compress what was decompresed until done or no room */
+ def->avail_in = RAWLEN - inf->avail_out;
+ def->next_in = raw;
+ if (inf->avail_out != 0)
+ flush = Z_FINISH;
+ ret = deflate(def, flush);
+ assert(ret != Z_STREAM_ERROR);
+ } while (ret != Z_STREAM_END && def->avail_out != 0);
+ return ret;
+}
+
+#define EXCESS 256 /* empirically determined stream overage */
+#define MARGIN 8 /* amount to back off for completion */
+
+/* compress from stdin to fixed-size block on stdout */
+int main(int argc, char **argv)
+{
+ int ret; /* return code */
+ unsigned size; /* requested fixed output block size */
+ unsigned have; /* bytes written by deflate() call */
+ unsigned char *blk; /* intermediate and final stream */
+ unsigned char *tmp; /* close to desired size stream */
+ z_stream def, inf; /* zlib deflate and inflate states */
+
+ /* get requested output size */
+ if (argc != 2)
+ quit("need one argument: size of output block");
+ ret = strtol(argv[1], argv + 1, 10);
+ if (argv[1][0] != 0)
+ quit("argument must be a number");
+ if (ret < 8) /* 8 is minimum zlib stream size */
+ quit("need positive size of 8 or greater");
+ size = (unsigned)ret;
+
+ /* allocate memory for buffers and compression engine */
+ blk = malloc(size + EXCESS);
+ def.zalloc = Z_NULL;
+ def.zfree = Z_NULL;
+ def.opaque = Z_NULL;
+ ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK || blk == NULL)
+ quit("out of memory");
+
+ /* compress from stdin until output full, or no more input */
+ def.avail_out = size + EXCESS;
+ def.next_out = blk;
+ ret = partcompress(stdin, &def);
+ if (ret == Z_ERRNO)
+ quit("error reading input");
+
+ /* if it all fit, then size was undersubscribed -- done! */
+ if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
+ /* write block to stdout */
+ have = size + EXCESS - def.avail_out;
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
+ quit("error writing output");
+
+ /* clean up and print results to stderr */
+ ret = deflateEnd(&def);
+ assert(ret != Z_STREAM_ERROR);
+ free(blk);
+ fprintf(stderr,
+ "%u bytes unused out of %u requested (all input)\n",
+ size - have, size);
+ return 0;
+ }
+
+ /* it didn't all fit -- set up for recompression */
+ inf.zalloc = Z_NULL;
+ inf.zfree = Z_NULL;
+ inf.opaque = Z_NULL;
+ inf.avail_in = 0;
+ inf.next_in = Z_NULL;
+ ret = inflateInit(&inf);
+ tmp = malloc(size + EXCESS);
+ if (ret != Z_OK || tmp == NULL)
+ quit("out of memory");
+ ret = deflateReset(&def);
+ assert(ret != Z_STREAM_ERROR);
+
+ /* do first recompression close to the right amount */
+ inf.avail_in = size + EXCESS;
+ inf.next_in = blk;
+ def.avail_out = size + EXCESS;
+ def.next_out = tmp;
+ ret = recompress(&inf, &def);
+ if (ret == Z_MEM_ERROR)
+ quit("out of memory");
+
+ /* set up for next reocmpression */
+ ret = inflateReset(&inf);
+ assert(ret != Z_STREAM_ERROR);
+ ret = deflateReset(&def);
+ assert(ret != Z_STREAM_ERROR);
+
+ /* do second and final recompression (third compression) */
+ inf.avail_in = size - MARGIN; /* assure stream will complete */
+ inf.next_in = tmp;
+ def.avail_out = size;
+ def.next_out = blk;
+ ret = recompress(&inf, &def);
+ if (ret == Z_MEM_ERROR)
+ quit("out of memory");
+ assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */
+
+ /* done -- write block to stdout */
+ have = size - def.avail_out;
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
+ quit("error writing output");
+
+ /* clean up and print results to stderr */
+ free(tmp);
+ ret = inflateEnd(&inf);
+ assert(ret != Z_STREAM_ERROR);
+ ret = deflateEnd(&def);
+ assert(ret != Z_STREAM_ERROR);
+ free(blk);
+ fprintf(stderr,
+ "%u bytes unused out of %u requested (%lu input)\n",
+ size - have, size, def.total_in);
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/gun.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/gun.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/gun.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/gun.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,693 @@
+/* gun.c -- simple gunzip to give an example of the use of inflateBack()
+ * Copyright (C) 2003, 2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ Version 1.3 12 June 2005 Mark Adler */
+
+/* Version history:
+ 1.0 16 Feb 2003 First version for testing of inflateBack()
+ 1.1 21 Feb 2005 Decompress concatenated gzip streams
+ Remove use of "this" variable (C++ keyword)
+ Fix return value for in()
+ Improve allocation failure checking
+ Add typecasting for void * structures
+ Add -h option for command version and usage
+ Add a bunch of comments
+ 1.2 20 Mar 2005 Add Unix compress (LZW) decompression
+ Copy file attributes from input file to output file
+ 1.3 12 Jun 2005 Add casts for error messages [Oberhumer]
+ */
+
+/*
+ gun [ -t ] [ name ... ]
+
+ decompresses the data in the named gzip files. If no arguments are given,
+ gun will decompress from stdin to stdout. The names must end in .gz, -gz,
+ .z, -z, _z, or .Z. The uncompressed data will be written to a file name
+ with the suffix stripped. On success, the original file is deleted. On
+ failure, the output file is deleted. For most failures, the command will
+ continue to process the remaining names on the command line. A memory
+ allocation failure will abort the command. If -t is specified, then the
+ listed files or stdin will be tested as gzip files for integrity (without
+ checking for a proper suffix), no output will be written, and no files
+ will be deleted.
+
+ Like gzip, gun allows concatenated gzip streams and will decompress them,
+ writing all of the uncompressed data to the output. Unlike gzip, gun allows
+ an empty file on input, and will produce no error writing an empty output
+ file.
+
+ gun will also decompress files made by Unix compress, which uses LZW
+ compression. These files are automatically detected by virtue of their
+ magic header bytes. Since the end of Unix compress stream is marked by the
+ end-of-file, they cannot be concantenated. If a Unix compress stream is
+ encountered in an input file, it is the last stream in that file.
+
+ Like gunzip and uncompress, the file attributes of the orignal compressed
+ file are maintained in the final uncompressed file, to the extent that the
+ user permissions allow it.
+
+ On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version
+ 1.2.4) is on the same file, when gun is linked with zlib 1.2.2. Also the
+ LZW decompression provided by gun is about twice as fast as the standard
+ Unix uncompress command.
+ */
+
+/* external functions and related types and constants */
+#include <stdio.h> /* fprintf() */
+#include <stdlib.h> /* malloc(), free() */
+#include <string.h> /* strerror(), strcmp(), strlen(), memcpy() */
+#include <errno.h> /* errno */
+#include <fcntl.h> /* open() */
+#include <unistd.h> /* read(), write(), close(), chown(), unlink() */
+#include <sys/types.h>
+#include <sys/stat.h> /* stat(), chmod() */
+#include <utime.h> /* utime() */
+#include "zlib.h" /* inflateBackInit(), inflateBack(), */
+ /* inflateBackEnd(), crc32() */
+
+/* function declaration */
+#define local static
+
+/* buffer constants */
+#define SIZE 32768U /* input and output buffer sizes */
+#define PIECE 16384 /* limits i/o chunks for 16-bit int case */
+
+/* structure for infback() to pass to input function in() -- it maintains the
+ input file and a buffer of size SIZE */
+struct ind {
+ int infile;
+ unsigned char *inbuf;
+};
+
+/* Load input buffer, assumed to be empty, and return bytes loaded and a
+ pointer to them. read() is called until the buffer is full, or until it
+ returns end-of-file or error. Return 0 on error. */
+local unsigned in(void *in_desc, unsigned char **buf)
+{
+ int ret;
+ unsigned len;
+ unsigned char *next;
+ struct ind *me = (struct ind *)in_desc;
+
+ next = me->inbuf;
+ *buf = next;
+ len = 0;
+ do {
+ ret = PIECE;
+ if ((unsigned)ret > SIZE - len)
+ ret = (int)(SIZE - len);
+ ret = (int)read(me->infile, next, ret);
+ if (ret == -1) {
+ len = 0;
+ break;
+ }
+ next += ret;
+ len += ret;
+ } while (ret != 0 && len < SIZE);
+ return len;
+}
+
+/* structure for infback() to pass to output function out() -- it maintains the
+ output file, a running CRC-32 check on the output and the total number of
+ bytes output, both for checking against the gzip trailer. (The length in
+ the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and
+ the output is greater than 4 GB.) */
+struct outd {
+ int outfile;
+ int check; /* true if checking crc and total */
+ unsigned long crc;
+ unsigned long total;
+};
+
+/* Write output buffer and update the CRC-32 and total bytes written. write()
+ is called until all of the output is written or an error is encountered.
+ On success out() returns 0. For a write failure, out() returns 1. If the
+ output file descriptor is -1, then nothing is written.
+ */
+local int out(void *out_desc, unsigned char *buf, unsigned len)
+{
+ int ret;
+ struct outd *me = (struct outd *)out_desc;
+
+ if (me->check) {
+ me->crc = crc32(me->crc, buf, len);
+ me->total += len;
+ }
+ if (me->outfile != -1)
+ do {
+ ret = PIECE;
+ if ((unsigned)ret > len)
+ ret = (int)len;
+ ret = (int)write(me->outfile, buf, ret);
+ if (ret == -1)
+ return 1;
+ buf += ret;
+ len -= ret;
+ } while (len != 0);
+ return 0;
+}
+
+/* next input byte macro for use inside lunpipe() and gunpipe() */
+#define NEXT() (have ? 0 : (have = in(indp, &next)), \
+ last = have ? (have--, (int)(*next++)) : -1)
+
+/* memory for gunpipe() and lunpipe() --
+ the first 256 entries of prefix[] and suffix[] are never used, could
+ have offset the index, but it's faster to waste the memory */
+unsigned char inbuf[SIZE]; /* input buffer */
+unsigned char outbuf[SIZE]; /* output buffer */
+unsigned short prefix[65536]; /* index to LZW prefix string */
+unsigned char suffix[65536]; /* one-character LZW suffix */
+unsigned char match[65280 + 2]; /* buffer for reversed match or gzip
+ 32K sliding window */
+
+/* throw out what's left in the current bits byte buffer (this is a vestigial
+ aspect of the compressed data format derived from an implementation that
+ made use of a special VAX machine instruction!) */
+#define FLUSHCODE() \
+ do { \
+ left = 0; \
+ rem = 0; \
+ if (chunk > have) { \
+ chunk -= have; \
+ have = 0; \
+ if (NEXT() == -1) \
+ break; \
+ chunk--; \
+ if (chunk > have) { \
+ chunk = have = 0; \
+ break; \
+ } \
+ } \
+ have -= chunk; \
+ next += chunk; \
+ chunk = 0; \
+ } while (0)
+
+/* Decompress a compress (LZW) file from indp to outfile. The compress magic
+ header (two bytes) has already been read and verified. There are have bytes
+ of buffered input at next. strm is used for passing error information back
+ to gunpipe().
+
+ lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of
+ file, read error, or write error (a write error indicated by strm->next_in
+ not equal to Z_NULL), or Z_DATA_ERROR for invalid input.
+ */
+local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
+ int outfile, z_stream *strm)
+{
+ int last; /* last byte read by NEXT(), or -1 if EOF */
+ int chunk; /* bytes left in current chunk */
+ int left; /* bits left in rem */
+ unsigned rem; /* unused bits from input */
+ int bits; /* current bits per code */
+ unsigned code; /* code, table traversal index */
+ unsigned mask; /* mask for current bits codes */
+ int max; /* maximum bits per code for this stream */
+ int flags; /* compress flags, then block compress flag */
+ unsigned end; /* last valid entry in prefix/suffix tables */
+ unsigned temp; /* current code */
+ unsigned prev; /* previous code */
+ unsigned final; /* last character written for previous code */
+ unsigned stack; /* next position for reversed string */
+ unsigned outcnt; /* bytes in output buffer */
+ struct outd outd; /* output structure */
+
+ /* set up output */
+ outd.outfile = outfile;
+ outd.check = 0;
+
+ /* process remainder of compress header -- a flags byte */
+ flags = NEXT();
+ if (last == -1)
+ return Z_BUF_ERROR;
+ if (flags & 0x60) {
+ strm->msg = (char *)"unknown lzw flags set";
+ return Z_DATA_ERROR;
+ }
+ max = flags & 0x1f;
+ if (max < 9 || max > 16) {
+ strm->msg = (char *)"lzw bits out of range";
+ return Z_DATA_ERROR;
+ }
+ if (max == 9) /* 9 doesn't really mean 9 */
+ max = 10;
+ flags &= 0x80; /* true if block compress */
+
+ /* clear table */
+ bits = 9;
+ mask = 0x1ff;
+ end = flags ? 256 : 255;
+
+ /* set up: get first 9-bit code, which is the first decompressed byte, but
+ don't create a table entry until the next code */
+ if (NEXT() == -1) /* no compressed data is ok */
+ return Z_OK;
+ final = prev = (unsigned)last; /* low 8 bits of code */
+ if (NEXT() == -1) /* missing a bit */
+ return Z_BUF_ERROR;
+ if (last & 1) { /* code must be < 256 */
+ strm->msg = (char *)"invalid lzw code";
+ return Z_DATA_ERROR;
+ }
+ rem = (unsigned)last >> 1; /* remaining 7 bits */
+ left = 7;
+ chunk = bits - 2; /* 7 bytes left in this chunk */
+ outbuf[0] = (unsigned char)final; /* write first decompressed byte */
+ outcnt = 1;
+
+ /* decode codes */
+ stack = 0;
+ for (;;) {
+ /* if the table will be full after this, increment the code size */
+ if (end >= mask && bits < max) {
+ FLUSHCODE();
+ bits++;
+ mask <<= 1;
+ mask++;
+ }
+
+ /* get a code of length bits */
+ if (chunk == 0) /* decrement chunk modulo bits */
+ chunk = bits;
+ code = rem; /* low bits of code */
+ if (NEXT() == -1) { /* EOF is end of compressed data */
+ /* write remaining buffered output */
+ if (outcnt && out(&outd, outbuf, outcnt)) {
+ strm->next_in = outbuf; /* signal write error */
+ return Z_BUF_ERROR;
+ }
+ return Z_OK;
+ }
+ code += (unsigned)last << left; /* middle (or high) bits of code */
+ left += 8;
+ chunk--;
+ if (bits > left) { /* need more bits */
+ if (NEXT() == -1) /* can't end in middle of code */
+ return Z_BUF_ERROR;
+ code += (unsigned)last << left; /* high bits of code */
+ left += 8;
+ chunk--;
+ }
+ code &= mask; /* mask to current code length */
+ left -= bits; /* number of unused bits */
+ rem = (unsigned)last >> (8 - left); /* unused bits from last byte */
+
+ /* process clear code (256) */
+ if (code == 256 && flags) {
+ FLUSHCODE();
+ bits = 9; /* initialize bits and mask */
+ mask = 0x1ff;
+ end = 255; /* empty table */
+ continue; /* get next code */
+ }
+
+ /* special code to reuse last match */
+ temp = code; /* save the current code */
+ if (code > end) {
+ /* Be picky on the allowed code here, and make sure that the code
+ we drop through (prev) will be a valid index so that random
+ input does not cause an exception. The code != end + 1 check is
+ empirically derived, and not checked in the original uncompress
+ code. If this ever causes a problem, that check could be safely
+ removed. Leaving this check in greatly improves gun's ability
+ to detect random or corrupted input after a compress header.
+ In any case, the prev > end check must be retained. */
+ if (code != end + 1 || prev > end) {
+ strm->msg = (char *)"invalid lzw code";
+ return Z_DATA_ERROR;
+ }
+ match[stack++] = (unsigned char)final;
+ code = prev;
+ }
+
+ /* walk through linked list to generate output in reverse order */
+ while (code >= 256) {
+ match[stack++] = suffix[code];
+ code = prefix[code];
+ }
+ match[stack++] = (unsigned char)code;
+ final = code;
+
+ /* link new table entry */
+ if (end < mask) {
+ end++;
+ prefix[end] = (unsigned short)prev;
+ suffix[end] = (unsigned char)final;
+ }
+
+ /* set previous code for next iteration */
+ prev = temp;
+
+ /* write output in forward order */
+ while (stack > SIZE - outcnt) {
+ while (outcnt < SIZE)
+ outbuf[outcnt++] = match[--stack];
+ if (out(&outd, outbuf, outcnt)) {
+ strm->next_in = outbuf; /* signal write error */
+ return Z_BUF_ERROR;
+ }
+ outcnt = 0;
+ }
+ do {
+ outbuf[outcnt++] = match[--stack];
+ } while (stack);
+
+ /* loop for next code with final and prev as the last match, rem and
+ left provide the first 0..7 bits of the next code, end is the last
+ valid table entry */
+ }
+}
+
+/* Decompress a gzip file from infile to outfile. strm is assumed to have been
+ successfully initialized with inflateBackInit(). The input file may consist
+ of a series of gzip streams, in which case all of them will be decompressed
+ to the output file. If outfile is -1, then the gzip stream(s) integrity is
+ checked and nothing is written.
+
+ The return value is a zlib error code: Z_MEM_ERROR if out of memory,
+ Z_DATA_ERROR if the header or the compressed data is invalid, or if the
+ trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends
+ prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip
+ stream) follows a valid gzip stream.
+ */
+local int gunpipe(z_stream *strm, int infile, int outfile)
+{
+ int ret, first, last;
+ unsigned have, flags, len;
+ unsigned char *next;
+ struct ind ind, *indp;
+ struct outd outd;
+
+ /* setup input buffer */
+ ind.infile = infile;
+ ind.inbuf = inbuf;
+ indp = &ind;
+
+ /* decompress concatenated gzip streams */
+ have = 0; /* no input data read in yet */
+ first = 1; /* looking for first gzip header */
+ strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */
+ for (;;) {
+ /* look for the two magic header bytes for a gzip stream */
+ if (NEXT() == -1) {
+ ret = Z_OK;
+ break; /* empty gzip stream is ok */
+ }
+ if (last != 31 || (NEXT() != 139 && last != 157)) {
+ strm->msg = (char *)"incorrect header check";
+ ret = first ? Z_DATA_ERROR : Z_ERRNO;
+ break; /* not a gzip or compress header */
+ }
+ first = 0; /* next non-header is junk */
+
+ /* process a compress (LZW) file -- can't be concatenated after this */
+ if (last == 157) {
+ ret = lunpipe(have, next, indp, outfile, strm);
+ break;
+ }
+
+ /* process remainder of gzip header */
+ ret = Z_BUF_ERROR;
+ if (NEXT() != 8) { /* only deflate method allowed */
+ if (last == -1) break;
+ strm->msg = (char *)"unknown compression method";
+ ret = Z_DATA_ERROR;
+ break;
+ }
+ flags = NEXT(); /* header flags */
+ NEXT(); /* discard mod time, xflgs, os */
+ NEXT();
+ NEXT();
+ NEXT();
+ NEXT();
+ NEXT();
+ if (last == -1) break;
+ if (flags & 0xe0) {
+ strm->msg = (char *)"unknown header flags set";
+ ret = Z_DATA_ERROR;
+ break;
+ }
+ if (flags & 4) { /* extra field */
+ len = NEXT();
+ len += (unsigned)(NEXT()) << 8;
+ if (last == -1) break;
+ while (len > have) {
+ len -= have;
+ have = 0;
+ if (NEXT() == -1) break;
+ len--;
+ }
+ if (last == -1) break;
+ have -= len;
+ next += len;
+ }
+ if (flags & 8) /* file name */
+ while (NEXT() != 0 && last != -1)
+ ;
+ if (flags & 16) /* comment */
+ while (NEXT() != 0 && last != -1)
+ ;
+ if (flags & 2) { /* header crc */
+ NEXT();
+ NEXT();
+ }
+ if (last == -1) break;
+
+ /* set up output */
+ outd.outfile = outfile;
+ outd.check = 1;
+ outd.crc = crc32(0L, Z_NULL, 0);
+ outd.total = 0;
+
+ /* decompress data to output */
+ strm->next_in = next;
+ strm->avail_in = have;
+ ret = inflateBack(strm, in, indp, out, &outd);
+ if (ret != Z_STREAM_END) break;
+ next = strm->next_in;
+ have = strm->avail_in;
+ strm->next_in = Z_NULL; /* so Z_BUF_ERROR means EOF */
+
+ /* check trailer */
+ ret = Z_BUF_ERROR;
+ if (NEXT() != (outd.crc & 0xff) ||
+ NEXT() != ((outd.crc >> 8) & 0xff) ||
+ NEXT() != ((outd.crc >> 16) & 0xff) ||
+ NEXT() != ((outd.crc >> 24) & 0xff)) {
+ /* crc error */
+ if (last != -1) {
+ strm->msg = (char *)"incorrect data check";
+ ret = Z_DATA_ERROR;
+ }
+ break;
+ }
+ if (NEXT() != (outd.total & 0xff) ||
+ NEXT() != ((outd.total >> 8) & 0xff) ||
+ NEXT() != ((outd.total >> 16) & 0xff) ||
+ NEXT() != ((outd.total >> 24) & 0xff)) {
+ /* length error */
+ if (last != -1) {
+ strm->msg = (char *)"incorrect length check";
+ ret = Z_DATA_ERROR;
+ }
+ break;
+ }
+
+ /* go back and look for another gzip stream */
+ }
+
+ /* clean up and return */
+ return ret;
+}
+
+/* Copy file attributes, from -> to, as best we can. This is best effort, so
+ no errors are reported. The mode bits, including suid, sgid, and the sticky
+ bit are copied (if allowed), the owner's user id and group id are copied
+ (again if allowed), and the access and modify times are copied. */
+local void copymeta(char *from, char *to)
+{
+ struct stat was;
+ struct utimbuf when;
+
+ /* get all of from's Unix meta data, return if not a regular file */
+ if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG)
+ return;
+
+ /* set to's mode bits, ignore errors */
+ (void)chmod(to, was.st_mode & 07777);
+
+ /* copy owner's user and group, ignore errors */
+ (void)chown(to, was.st_uid, was.st_gid);
+
+ /* copy access and modify times, ignore errors */
+ when.actime = was.st_atime;
+ when.modtime = was.st_mtime;
+ (void)utime(to, &when);
+}
+
+/* Decompress the file inname to the file outnname, of if test is true, just
+ decompress without writing and check the gzip trailer for integrity. If
+ inname is NULL or an empty string, read from stdin. If outname is NULL or
+ an empty string, write to stdout. strm is a pre-initialized inflateBack
+ structure. When appropriate, copy the file attributes from inname to
+ outname.
+
+ gunzip() returns 1 if there is an out-of-memory error or an unexpected
+ return code from gunpipe(). Otherwise it returns 0.
+ */
+local int gunzip(z_stream *strm, char *inname, char *outname, int test)
+{
+ int ret;
+ int infile, outfile;
+
+ /* open files */
+ if (inname == NULL || *inname == 0) {
+ inname = "-";
+ infile = 0; /* stdin */
+ }
+ else {
+ infile = open(inname, O_RDONLY, 0);
+ if (infile == -1) {
+ fprintf(stderr, "gun cannot open %s\n", inname);
+ return 0;
+ }
+ }
+ if (test)
+ outfile = -1;
+ else if (outname == NULL || *outname == 0) {
+ outname = "-";
+ outfile = 1; /* stdout */
+ }
+ else {
+ outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666);
+ if (outfile == -1) {
+ close(infile);
+ fprintf(stderr, "gun cannot create %s\n", outname);
+ return 0;
+ }
+ }
+ errno = 0;
+
+ /* decompress */
+ ret = gunpipe(strm, infile, outfile);
+ if (outfile > 2) close(outfile);
+ if (infile > 2) close(infile);
+
+ /* interpret result */
+ switch (ret) {
+ case Z_OK:
+ case Z_ERRNO:
+ if (infile > 2 && outfile > 2) {
+ copymeta(inname, outname); /* copy attributes */
+ unlink(inname);
+ }
+ if (ret == Z_ERRNO)
+ fprintf(stderr, "gun warning: trailing garbage ignored in %s\n",
+ inname);
+ break;
+ case Z_DATA_ERROR:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg);
+ break;
+ case Z_MEM_ERROR:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ return 1;
+ case Z_BUF_ERROR:
+ if (outfile > 2) unlink(outname);
+ if (strm->next_in != Z_NULL) {
+ fprintf(stderr, "gun write error on %s: %s\n",
+ outname, strerror(errno));
+ }
+ else if (errno) {
+ fprintf(stderr, "gun read error on %s: %s\n",
+ inname, strerror(errno));
+ }
+ else {
+ fprintf(stderr, "gun unexpected end of file on %s\n",
+ inname);
+ }
+ break;
+ default:
+ if (outfile > 2) unlink(outname);
+ fprintf(stderr, "gun internal error--aborting\n");
+ return 1;
+ }
+ return 0;
+}
+
+/* Process the gun command line arguments. See the command syntax near the
+ beginning of this source file. */
+int main(int argc, char **argv)
+{
+ int ret, len, test;
+ char *outname;
+ unsigned char *window;
+ z_stream strm;
+
+ /* initialize inflateBack state for repeated use */
+ window = match; /* reuse LZW match buffer */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = inflateBackInit(&strm, 15, window);
+ if (ret != Z_OK) {
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ return 1;
+ }
+
+ /* decompress each file to the same name with the suffix removed */
+ argc--;
+ argv++;
+ test = 0;
+ if (argc && strcmp(*argv, "-h") == 0) {
+ fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
+ fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
+ fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
+ return 0;
+ }
+ if (argc && strcmp(*argv, "-t") == 0) {
+ test = 1;
+ argc--;
+ argv++;
+ }
+ if (argc)
+ do {
+ if (test)
+ outname = NULL;
+ else {
+ len = (int)strlen(*argv);
+ if (strcmp(*argv + len - 3, ".gz") == 0 ||
+ strcmp(*argv + len - 3, "-gz") == 0)
+ len -= 3;
+ else if (strcmp(*argv + len - 2, ".z") == 0 ||
+ strcmp(*argv + len - 2, "-z") == 0 ||
+ strcmp(*argv + len - 2, "_z") == 0 ||
+ strcmp(*argv + len - 2, ".Z") == 0)
+ len -= 2;
+ else {
+ fprintf(stderr, "gun error: no gz type on %s--skipping\n",
+ *argv);
+ continue;
+ }
+ outname = malloc(len + 1);
+ if (outname == NULL) {
+ fprintf(stderr, "gun out of memory error--aborting\n");
+ ret = 1;
+ break;
+ }
+ memcpy(outname, *argv, len);
+ outname[len] = 0;
+ }
+ ret = gunzip(&strm, *argv, outname, test);
+ if (outname != NULL) free(outname);
+ if (ret) break;
+ } while (argv++, --argc);
+ else
+ ret = gunzip(&strm, NULL, NULL, test);
+
+ /* clean up */
+ inflateBackEnd(&strm);
+ return ret;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/gzappend.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/gzappend.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/gzappend.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/gzappend.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,500 @@
+/* gzappend -- command to append to a gzip file
+
+ Copyright (C) 2003 Mark Adler, all rights reserved
+ version 1.1, 4 Nov 2003
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler at alumni.caltech.edu
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 19 Oct 2003 - First version
+ * 1.1 4 Nov 2003 - Expand and clarify some comments and notes
+ * - Add version and copyright to help
+ * - Send help to stdout instead of stderr
+ * - Add some preemptive typecasts
+ * - Add L to constants in lseek() calls
+ * - Remove some debugging information in error messages
+ * - Use new data_type definition for zlib 1.2.1
+ * - Simplfy and unify file operations
+ * - Finish off gzip file in gztack()
+ * - Use deflatePrime() instead of adding empty blocks
+ * - Keep gzip file clean on appended file read errors
+ * - Use in-place rotate instead of auxiliary buffer
+ * (Why you ask? Because it was fun to write!)
+ */
+
+/*
+ gzappend takes a gzip file and appends to it, compressing files from the
+ command line or data from stdin. The gzip file is written to directly, to
+ avoid copying that file, in case it's large. Note that this results in the
+ unfriendly behavior that if gzappend fails, the gzip file is corrupted.
+
+ This program was written to illustrate the use of the new Z_BLOCK option of
+ zlib 1.2.x's inflate() function. This option returns from inflate() at each
+ block boundary to facilitate locating and modifying the last block bit at
+ the start of the final deflate block. Also whether using Z_BLOCK or not,
+ another required feature of zlib 1.2.x is that inflate() now provides the
+ number of unusued bits in the last input byte used. gzappend will not work
+ with versions of zlib earlier than 1.2.1.
+
+ gzappend first decompresses the gzip file internally, discarding all but
+ the last 32K of uncompressed data, and noting the location of the last block
+ bit and the number of unused bits in the last byte of the compressed data.
+ The gzip trailer containing the CRC-32 and length of the uncompressed data
+ is verified. This trailer will be later overwritten.
+
+ Then the last block bit is cleared by seeking back in the file and rewriting
+ the byte that contains it. Seeking forward, the last byte of the compressed
+ data is saved along with the number of unused bits to initialize deflate.
+
+ A deflate process is initialized, using the last 32K of the uncompressed
+ data from the gzip file to initialize the dictionary. If the total
+ uncompressed data was less than 32K, then all of it is used to initialize
+ the dictionary. The deflate output bit buffer is also initialized with the
+ last bits from the original deflate stream. From here on, the data to
+ append is simply compressed using deflate, and written to the gzip file.
+ When that is complete, the new CRC-32 and uncompressed length are written
+ as the trailer of the gzip file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include "zlib.h"
+
+#define local static
+#define LGCHUNK 14
+#define CHUNK (1U << LGCHUNK)
+#define DSIZE 32768U
+
+/* print an error message and terminate with extreme prejudice */
+local void bye(char *msg1, char *msg2)
+{
+ fprintf(stderr, "gzappend error: %s%s\n", msg1, msg2);
+ exit(1);
+}
+
+/* return the greatest common divisor of a and b using Euclid's algorithm,
+ modified to be fast when one argument much greater than the other, and
+ coded to avoid unnecessary swapping */
+local unsigned gcd(unsigned a, unsigned b)
+{
+ unsigned c;
+
+ while (a && b)
+ if (a > b) {
+ c = b;
+ while (a - c >= c)
+ c <<= 1;
+ a -= c;
+ }
+ else {
+ c = a;
+ while (b - c >= c)
+ c <<= 1;
+ b -= c;
+ }
+ return a + b;
+}
+
+/* rotate list[0..len-1] left by rot positions, in place */
+local void rotate(unsigned char *list, unsigned len, unsigned rot)
+{
+ unsigned char tmp;
+ unsigned cycles;
+ unsigned char *start, *last, *to, *from;
+
+ /* normalize rot and handle degenerate cases */
+ if (len < 2) return;
+ if (rot >= len) rot %= len;
+ if (rot == 0) return;
+
+ /* pointer to last entry in list */
+ last = list + (len - 1);
+
+ /* do simple left shift by one */
+ if (rot == 1) {
+ tmp = *list;
+ memcpy(list, list + 1, len - 1);
+ *last = tmp;
+ return;
+ }
+
+ /* do simple right shift by one */
+ if (rot == len - 1) {
+ tmp = *last;
+ memmove(list + 1, list, len - 1);
+ *list = tmp;
+ return;
+ }
+
+ /* otherwise do rotate as a set of cycles in place */
+ cycles = gcd(len, rot); /* number of cycles */
+ do {
+ start = from = list + cycles; /* start index is arbitrary */
+ tmp = *from; /* save entry to be overwritten */
+ for (;;) {
+ to = from; /* next step in cycle */
+ from += rot; /* go right rot positions */
+ if (from > last) from -= len; /* (pointer better not wrap) */
+ if (from == start) break; /* all but one shifted */
+ *to = *from; /* shift left */
+ }
+ *to = tmp; /* complete the circle */
+ } while (--cycles);
+}
+
+/* structure for gzip file read operations */
+typedef struct {
+ int fd; /* file descriptor */
+ int size; /* 1 << size is bytes in buf */
+ unsigned left; /* bytes available at next */
+ unsigned char *buf; /* buffer */
+ unsigned char *next; /* next byte in buffer */
+ char *name; /* file name for error messages */
+} file;
+
+/* reload buffer */
+local int readin(file *in)
+{
+ int len;
+
+ len = read(in->fd, in->buf, 1 << in->size);
+ if (len == -1) bye("error reading ", in->name);
+ in->left = (unsigned)len;
+ in->next = in->buf;
+ return len;
+}
+
+/* read from file in, exit if end-of-file */
+local int readmore(file *in)
+{
+ if (readin(in) == 0) bye("unexpected end of ", in->name);
+ return 0;
+}
+
+#define read1(in) (in->left == 0 ? readmore(in) : 0, \
+ in->left--, *(in->next)++)
+
+/* skip over n bytes of in */
+local void skip(file *in, unsigned n)
+{
+ unsigned bypass;
+
+ if (n > in->left) {
+ n -= in->left;
+ bypass = n & ~((1U << in->size) - 1);
+ if (bypass) {
+ if (lseek(in->fd, (off_t)bypass, SEEK_CUR) == -1)
+ bye("seeking ", in->name);
+ n -= bypass;
+ }
+ readmore(in);
+ if (n > in->left)
+ bye("unexpected end of ", in->name);
+ }
+ in->left -= n;
+ in->next += n;
+}
+
+/* read a four-byte unsigned integer, little-endian, from in */
+unsigned long read4(file *in)
+{
+ unsigned long val;
+
+ val = read1(in);
+ val += (unsigned)read1(in) << 8;
+ val += (unsigned long)read1(in) << 16;
+ val += (unsigned long)read1(in) << 24;
+ return val;
+}
+
+/* skip over gzip header */
+local void gzheader(file *in)
+{
+ int flags;
+ unsigned n;
+
+ if (read1(in) != 31 || read1(in) != 139) bye(in->name, " not a gzip file");
+ if (read1(in) != 8) bye("unknown compression method in", in->name);
+ flags = read1(in);
+ if (flags & 0xe0) bye("unknown header flags set in", in->name);
+ skip(in, 6);
+ if (flags & 4) {
+ n = read1(in);
+ n += (unsigned)(read1(in)) << 8;
+ skip(in, n);
+ }
+ if (flags & 8) while (read1(in) != 0) ;
+ if (flags & 16) while (read1(in) != 0) ;
+ if (flags & 2) skip(in, 2);
+}
+
+/* decompress gzip file "name", return strm with a deflate stream ready to
+ continue compression of the data in the gzip file, and return a file
+ descriptor pointing to where to write the compressed data -- the deflate
+ stream is initialized to compress using level "level" */
+local int gzscan(char *name, z_stream *strm, int level)
+{
+ int ret, lastbit, left, full;
+ unsigned have;
+ unsigned long crc, tot;
+ unsigned char *window;
+ off_t lastoff, end;
+ file gz;
+
+ /* open gzip file */
+ gz.name = name;
+ gz.fd = open(name, O_RDWR, 0);
+ if (gz.fd == -1) bye("cannot open ", name);
+ gz.buf = malloc(CHUNK);
+ if (gz.buf == NULL) bye("out of memory", "");
+ gz.size = LGCHUNK;
+ gz.left = 0;
+
+ /* skip gzip header */
+ gzheader(&gz);
+
+ /* prepare to decompress */
+ window = malloc(DSIZE);
+ if (window == NULL) bye("out of memory", "");
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+ strm->opaque = Z_NULL;
+ ret = inflateInit2(strm, -15);
+ if (ret != Z_OK) bye("out of memory", " or library mismatch");
+
+ /* decompress the deflate stream, saving append information */
+ lastbit = 0;
+ lastoff = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
+ left = 0;
+ strm->avail_in = gz.left;
+ strm->next_in = gz.next;
+ crc = crc32(0L, Z_NULL, 0);
+ have = full = 0;
+ do {
+ /* if needed, get more input */
+ if (strm->avail_in == 0) {
+ readmore(&gz);
+ strm->avail_in = gz.left;
+ strm->next_in = gz.next;
+ }
+
+ /* set up output to next available section of sliding window */
+ strm->avail_out = DSIZE - have;
+ strm->next_out = window + have;
+
+ /* inflate and check for errors */
+ ret = inflate(strm, Z_BLOCK);
+ if (ret == Z_STREAM_ERROR) bye("internal stream error!", "");
+ if (ret == Z_MEM_ERROR) bye("out of memory", "");
+ if (ret == Z_DATA_ERROR)
+ bye("invalid compressed data--format violated in", name);
+
+ /* update crc and sliding window pointer */
+ crc = crc32(crc, window + have, DSIZE - have - strm->avail_out);
+ if (strm->avail_out)
+ have = DSIZE - strm->avail_out;
+ else {
+ have = 0;
+ full = 1;
+ }
+
+ /* process end of block */
+ if (strm->data_type & 128) {
+ if (strm->data_type & 64)
+ left = strm->data_type & 0x1f;
+ else {
+ lastbit = strm->data_type & 0x1f;
+ lastoff = lseek(gz.fd, 0L, SEEK_CUR) - strm->avail_in;
+ }
+ }
+ } while (ret != Z_STREAM_END);
+ inflateEnd(strm);
+ gz.left = strm->avail_in;
+ gz.next = strm->next_in;
+
+ /* save the location of the end of the compressed data */
+ end = lseek(gz.fd, 0L, SEEK_CUR) - gz.left;
+
+ /* check gzip trailer and save total for deflate */
+ if (crc != read4(&gz))
+ bye("invalid compressed data--crc mismatch in ", name);
+ tot = strm->total_out;
+ if ((tot & 0xffffffffUL) != read4(&gz))
+ bye("invalid compressed data--length mismatch in", name);
+
+ /* if not at end of file, warn */
+ if (gz.left || readin(&gz))
+ fprintf(stderr,
+ "gzappend warning: junk at end of gzip file overwritten\n");
+
+ /* clear last block bit */
+ lseek(gz.fd, lastoff - (lastbit != 0), SEEK_SET);
+ if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
+ *gz.buf = (unsigned char)(*gz.buf ^ (1 << ((8 - lastbit) & 7)));
+ lseek(gz.fd, -1L, SEEK_CUR);
+ if (write(gz.fd, gz.buf, 1) != 1) bye("writing after seek to ", name);
+
+ /* if window wrapped, build dictionary from window by rotating */
+ if (full) {
+ rotate(window, DSIZE, have);
+ have = DSIZE;
+ }
+
+ /* set up deflate stream with window, crc, total_in, and leftover bits */
+ ret = deflateInit2(strm, level, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY);
+ if (ret != Z_OK) bye("out of memory", "");
+ deflateSetDictionary(strm, window, have);
+ strm->adler = crc;
+ strm->total_in = tot;
+ if (left) {
+ lseek(gz.fd, --end, SEEK_SET);
+ if (read(gz.fd, gz.buf, 1) != 1) bye("reading after seek on ", name);
+ deflatePrime(strm, 8 - left, *gz.buf);
+ }
+ lseek(gz.fd, end, SEEK_SET);
+
+ /* clean up and return */
+ free(window);
+ free(gz.buf);
+ return gz.fd;
+}
+
+/* append file "name" to gzip file gd using deflate stream strm -- if last
+ is true, then finish off the deflate stream at the end */
+local void gztack(char *name, int gd, z_stream *strm, int last)
+{
+ int fd, len, ret;
+ unsigned left;
+ unsigned char *in, *out;
+
+ /* open file to compress and append */
+ fd = 0;
+ if (name != NULL) {
+ fd = open(name, O_RDONLY, 0);
+ if (fd == -1)
+ fprintf(stderr, "gzappend warning: %s not found, skipping ...\n",
+ name);
+ }
+
+ /* allocate buffers */
+ in = fd == -1 ? NULL : malloc(CHUNK);
+ out = malloc(CHUNK);
+ if (out == NULL) bye("out of memory", "");
+
+ /* compress input file and append to gzip file */
+ do {
+ /* get more input */
+ len = fd == -1 ? 0 : read(fd, in, CHUNK);
+ if (len == -1) {
+ fprintf(stderr,
+ "gzappend warning: error reading %s, skipping rest ...\n",
+ name);
+ len = 0;
+ }
+ strm->avail_in = (unsigned)len;
+ strm->next_in = in;
+ if (len) strm->adler = crc32(strm->adler, in, (unsigned)len);
+
+ /* compress and write all available output */
+ do {
+ strm->avail_out = CHUNK;
+ strm->next_out = out;
+ ret = deflate(strm, last && len == 0 ? Z_FINISH : Z_NO_FLUSH);
+ left = CHUNK - strm->avail_out;
+ while (left) {
+ len = write(gd, out + CHUNK - strm->avail_out - left, left);
+ if (len == -1) bye("writing gzip file", "");
+ left -= (unsigned)len;
+ }
+ } while (strm->avail_out == 0 && ret != Z_STREAM_END);
+ } while (len != 0);
+
+ /* write trailer after last entry */
+ if (last) {
+ deflateEnd(strm);
+ out[0] = (unsigned char)(strm->adler);
+ out[1] = (unsigned char)(strm->adler >> 8);
+ out[2] = (unsigned char)(strm->adler >> 16);
+ out[3] = (unsigned char)(strm->adler >> 24);
+ out[4] = (unsigned char)(strm->total_in);
+ out[5] = (unsigned char)(strm->total_in >> 8);
+ out[6] = (unsigned char)(strm->total_in >> 16);
+ out[7] = (unsigned char)(strm->total_in >> 24);
+ len = 8;
+ do {
+ ret = write(gd, out + 8 - len, len);
+ if (ret == -1) bye("writing gzip file", "");
+ len -= ret;
+ } while (len);
+ close(gd);
+ }
+
+ /* clean up and return */
+ free(out);
+ if (in != NULL) free(in);
+ if (fd > 0) close(fd);
+}
+
+/* process the compression level option if present, scan the gzip file, and
+ append the specified files, or append the data from stdin if no other file
+ names are provided on the command line -- the gzip file must be writable
+ and seekable */
+int main(int argc, char **argv)
+{
+ int gd, level;
+ z_stream strm;
+
+ /* ignore command name */
+ argv++;
+
+ /* provide usage if no arguments */
+ if (*argv == NULL) {
+ printf("gzappend 1.1 (4 Nov 2003) Copyright (C) 2003 Mark Adler\n");
+ printf(
+ "usage: gzappend [-level] file.gz [ addthis [ andthis ... ]]\n");
+ return 0;
+ }
+
+ /* set compression level */
+ level = Z_DEFAULT_COMPRESSION;
+ if (argv[0][0] == '-') {
+ if (argv[0][1] < '0' || argv[0][1] > '9' || argv[0][2] != 0)
+ bye("invalid compression level", "");
+ level = argv[0][1] - '0';
+ if (*++argv == NULL) bye("no gzip file name after options", "");
+ }
+
+ /* prepare to append to gzip file */
+ gd = gzscan(*argv++, &strm, level);
+
+ /* append files on command line, or from stdin if none */
+ if (*argv == NULL)
+ gztack(NULL, gd, &strm, 1);
+ else
+ do {
+ gztack(*argv, gd, &strm, argv[1] == NULL);
+ } while (*++argv != NULL);
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/gzjoin.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/gzjoin.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/gzjoin.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/gzjoin.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,448 @@
+/* gzjoin -- command to join gzip files into one gzip file
+
+ Copyright (C) 2004 Mark Adler, all rights reserved
+ version 1.0, 11 Dec 2004
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler at alumni.caltech.edu
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0 11 Dec 2004 - First version
+ * 1.1 12 Jun 2005 - Changed ssize_t to long for portability
+ */
+
+/*
+ gzjoin takes one or more gzip files on the command line and writes out a
+ single gzip file that will uncompress to the concatenation of the
+ uncompressed data from the individual gzip files. gzjoin does this without
+ having to recompress any of the data and without having to calculate a new
+ crc32 for the concatenated uncompressed data. gzjoin does however have to
+ decompress all of the input data in order to find the bits in the compressed
+ data that need to be modified to concatenate the streams.
+
+ gzjoin does not do an integrity check on the input gzip files other than
+ checking the gzip header and decompressing the compressed data. They are
+ otherwise assumed to be complete and correct.
+
+ Each joint between gzip files removes at least 18 bytes of previous trailer
+ and subsequent header, and inserts an average of about three bytes to the
+ compressed data in order to connect the streams. The output gzip file
+ has a minimal ten-byte gzip header with no file name or modification time.
+
+ This program was written to illustrate the use of the Z_BLOCK option of
+ inflate() and the crc32_combine() function. gzjoin will not compile with
+ versions of zlib earlier than 1.2.3.
+ */
+
+#include <stdio.h> /* fputs(), fprintf(), fwrite(), putc() */
+#include <stdlib.h> /* exit(), malloc(), free() */
+#include <fcntl.h> /* open() */
+#include <unistd.h> /* close(), read(), lseek() */
+#include "zlib.h"
+ /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */
+
+#define local static
+
+/* exit with an error (return a value to allow use in an expression) */
+local int bail(char *why1, char *why2)
+{
+ fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2);
+ exit(1);
+ return 0;
+}
+
+/* -- simple buffered file input with access to the buffer -- */
+
+#define CHUNK 32768 /* must be a power of two and fit in unsigned */
+
+/* bin buffered input file type */
+typedef struct {
+ char *name; /* name of file for error messages */
+ int fd; /* file descriptor */
+ unsigned left; /* bytes remaining at next */
+ unsigned char *next; /* next byte to read */
+ unsigned char *buf; /* allocated buffer of length CHUNK */
+} bin;
+
+/* close a buffered file and free allocated memory */
+local void bclose(bin *in)
+{
+ if (in != NULL) {
+ if (in->fd != -1)
+ close(in->fd);
+ if (in->buf != NULL)
+ free(in->buf);
+ free(in);
+ }
+}
+
+/* open a buffered file for input, return a pointer to type bin, or NULL on
+ failure */
+local bin *bopen(char *name)
+{
+ bin *in;
+
+ in = malloc(sizeof(bin));
+ if (in == NULL)
+ return NULL;
+ in->buf = malloc(CHUNK);
+ in->fd = open(name, O_RDONLY, 0);
+ if (in->buf == NULL || in->fd == -1) {
+ bclose(in);
+ return NULL;
+ }
+ in->left = 0;
+ in->next = in->buf;
+ in->name = name;
+ return in;
+}
+
+/* load buffer from file, return -1 on read error, 0 or 1 on success, with
+ 1 indicating that end-of-file was reached */
+local int bload(bin *in)
+{
+ long len;
+
+ if (in == NULL)
+ return -1;
+ if (in->left != 0)
+ return 0;
+ in->next = in->buf;
+ do {
+ len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
+ if (len < 0)
+ return -1;
+ in->left += (unsigned)len;
+ } while (len != 0 && in->left < CHUNK);
+ return len == 0 ? 1 : 0;
+}
+
+/* get a byte from the file, bail if end of file */
+#define bget(in) (in->left ? 0 : bload(in), \
+ in->left ? (in->left--, *(in->next)++) : \
+ bail("unexpected end of file on ", in->name))
+
+/* get a four-byte little-endian unsigned integer from file */
+local unsigned long bget4(bin *in)
+{
+ unsigned long val;
+
+ val = bget(in);
+ val += (unsigned long)(bget(in)) << 8;
+ val += (unsigned long)(bget(in)) << 16;
+ val += (unsigned long)(bget(in)) << 24;
+ return val;
+}
+
+/* skip bytes in file */
+local void bskip(bin *in, unsigned skip)
+{
+ /* check pointer */
+ if (in == NULL)
+ return;
+
+ /* easy case -- skip bytes in buffer */
+ if (skip <= in->left) {
+ in->left -= skip;
+ in->next += skip;
+ return;
+ }
+
+ /* skip what's in buffer, discard buffer contents */
+ skip -= in->left;
+ in->left = 0;
+
+ /* seek past multiples of CHUNK bytes */
+ if (skip > CHUNK) {
+ unsigned left;
+
+ left = skip & (CHUNK - 1);
+ if (left == 0) {
+ /* exact number of chunks: seek all the way minus one byte to check
+ for end-of-file with a read */
+ lseek(in->fd, skip - 1, SEEK_CUR);
+ if (read(in->fd, in->buf, 1) != 1)
+ bail("unexpected end of file on ", in->name);
+ return;
+ }
+
+ /* skip the integral chunks, update skip with remainder */
+ lseek(in->fd, skip - left, SEEK_CUR);
+ skip = left;
+ }
+
+ /* read more input and skip remainder */
+ bload(in);
+ if (skip > in->left)
+ bail("unexpected end of file on ", in->name);
+ in->left -= skip;
+ in->next += skip;
+}
+
+/* -- end of buffered input functions -- */
+
+/* skip the gzip header from file in */
+local void gzhead(bin *in)
+{
+ int flags;
+
+ /* verify gzip magic header and compression method */
+ if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8)
+ bail(in->name, " is not a valid gzip file");
+
+ /* get and verify flags */
+ flags = bget(in);
+ if ((flags & 0xe0) != 0)
+ bail("unknown reserved bits set in ", in->name);
+
+ /* skip modification time, extra flags, and os */
+ bskip(in, 6);
+
+ /* skip extra field if present */
+ if (flags & 4) {
+ unsigned len;
+
+ len = bget(in);
+ len += (unsigned)(bget(in)) << 8;
+ bskip(in, len);
+ }
+
+ /* skip file name if present */
+ if (flags & 8)
+ while (bget(in) != 0)
+ ;
+
+ /* skip comment if present */
+ if (flags & 16)
+ while (bget(in) != 0)
+ ;
+
+ /* skip header crc if present */
+ if (flags & 2)
+ bskip(in, 2);
+}
+
+/* write a four-byte little-endian unsigned integer to out */
+local void put4(unsigned long val, FILE *out)
+{
+ putc(val & 0xff, out);
+ putc((val >> 8) & 0xff, out);
+ putc((val >> 16) & 0xff, out);
+ putc((val >> 24) & 0xff, out);
+}
+
+/* Load up zlib stream from buffered input, bail if end of file */
+local void zpull(z_streamp strm, bin *in)
+{
+ if (in->left == 0)
+ bload(in);
+ if (in->left == 0)
+ bail("unexpected end of file on ", in->name);
+ strm->avail_in = in->left;
+ strm->next_in = in->next;
+}
+
+/* Write header for gzip file to out and initialize trailer. */
+local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out)
+{
+ fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
+ *crc = crc32(0L, Z_NULL, 0);
+ *tot = 0;
+}
+
+/* Copy the compressed data from name, zeroing the last block bit of the last
+ block if clr is true, and adding empty blocks as needed to get to a byte
+ boundary. If clr is false, then the last block becomes the last block of
+ the output, and the gzip trailer is written. crc and tot maintains the
+ crc and length (modulo 2^32) of the output for the trailer. The resulting
+ gzip file is written to out. gzinit() must be called before the first call
+ of gzcopy() to write the gzip header and to initialize crc and tot. */
+local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot,
+ FILE *out)
+{
+ int ret; /* return value from zlib functions */
+ int pos; /* where the "last block" bit is in byte */
+ int last; /* true if processing the last block */
+ bin *in; /* buffered input file */
+ unsigned char *start; /* start of compressed data in buffer */
+ unsigned char *junk; /* buffer for uncompressed data -- discarded */
+ z_off_t len; /* length of uncompressed data (support > 4 GB) */
+ z_stream strm; /* zlib inflate stream */
+
+ /* open gzip file and skip header */
+ in = bopen(name);
+ if (in == NULL)
+ bail("could not open ", name);
+ gzhead(in);
+
+ /* allocate buffer for uncompressed data and initialize raw inflate
+ stream */
+ junk = malloc(CHUNK);
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -15);
+ if (junk == NULL || ret != Z_OK)
+ bail("out of memory", "");
+
+ /* inflate and copy compressed data, clear last-block bit if requested */
+ len = 0;
+ zpull(&strm, in);
+ start = strm.next_in;
+ last = start[0] & 1;
+ if (last && clr)
+ start[0] &= ~1;
+ strm.avail_out = 0;
+ for (;;) {
+ /* if input used and output done, write used input and get more */
+ if (strm.avail_in == 0 && strm.avail_out != 0) {
+ fwrite(start, 1, strm.next_in - start, out);
+ start = in->buf;
+ in->left = 0;
+ zpull(&strm, in);
+ }
+
+ /* decompress -- return early when end-of-block reached */
+ strm.avail_out = CHUNK;
+ strm.next_out = junk;
+ ret = inflate(&strm, Z_BLOCK);
+ switch (ret) {
+ case Z_MEM_ERROR:
+ bail("out of memory", "");
+ case Z_DATA_ERROR:
+ bail("invalid compressed data in ", in->name);
+ }
+
+ /* update length of uncompressed data */
+ len += CHUNK - strm.avail_out;
+
+ /* check for block boundary (only get this when block copied out) */
+ if (strm.data_type & 128) {
+ /* if that was the last block, then done */
+ if (last)
+ break;
+
+ /* number of unused bits in last byte */
+ pos = strm.data_type & 7;
+
+ /* find the next last-block bit */
+ if (pos != 0) {
+ /* next last-block bit is in last used byte */
+ pos = 0x100 >> pos;
+ last = strm.next_in[-1] & pos;
+ if (last && clr)
+ strm.next_in[-1] &= ~pos;
+ }
+ else {
+ /* next last-block bit is in next unused byte */
+ if (strm.avail_in == 0) {
+ /* don't have that byte yet -- get it */
+ fwrite(start, 1, strm.next_in - start, out);
+ start = in->buf;
+ in->left = 0;
+ zpull(&strm, in);
+ }
+ last = strm.next_in[0] & 1;
+ if (last && clr)
+ strm.next_in[0] &= ~1;
+ }
+ }
+ }
+
+ /* update buffer with unused input */
+ in->left = strm.avail_in;
+ in->next = strm.next_in;
+
+ /* copy used input, write empty blocks to get to byte boundary */
+ pos = strm.data_type & 7;
+ fwrite(start, 1, in->next - start - 1, out);
+ last = in->next[-1];
+ if (pos == 0 || !clr)
+ /* already at byte boundary, or last file: write last byte */
+ putc(last, out);
+ else {
+ /* append empty blocks to last byte */
+ last &= ((0x100 >> pos) - 1); /* assure unused bits are zero */
+ if (pos & 1) {
+ /* odd -- append an empty stored block */
+ putc(last, out);
+ if (pos == 1)
+ putc(0, out); /* two more bits in block header */
+ fwrite("\0\0\xff\xff", 1, 4, out);
+ }
+ else {
+ /* even -- append 1, 2, or 3 empty fixed blocks */
+ switch (pos) {
+ case 6:
+ putc(last | 8, out);
+ last = 0;
+ case 4:
+ putc(last | 0x20, out);
+ last = 0;
+ case 2:
+ putc(last | 0x80, out);
+ putc(0, out);
+ }
+ }
+ }
+
+ /* update crc and tot */
+ *crc = crc32_combine(*crc, bget4(in), len);
+ *tot += (unsigned long)len;
+
+ /* clean up */
+ inflateEnd(&strm);
+ free(junk);
+ bclose(in);
+
+ /* write trailer if this is the last gzip file */
+ if (!clr) {
+ put4(*crc, out);
+ put4(*tot, out);
+ }
+}
+
+/* join the gzip files on the command line, write result to stdout */
+int main(int argc, char **argv)
+{
+ unsigned long crc, tot; /* running crc and total uncompressed length */
+
+ /* skip command name */
+ argc--;
+ argv++;
+
+ /* show usage if no arguments */
+ if (argc == 0) {
+ fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n",
+ stderr);
+ return 0;
+ }
+
+ /* join gzip files on command line and write to stdout */
+ gzinit(&crc, &tot, stdout);
+ while (argc--)
+ gzcopy(*argv++, argc, &crc, &tot, stdout);
+
+ /* done */
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/gzlog.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/gzlog.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/gzlog.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/gzlog.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,413 @@
+/*
+ * gzlog.c
+ * Copyright (C) 2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in gzlog.h
+ * version 1.0, 26 Nov 2004
+ *
+ */
+
+#include <string.h> /* memcmp() */
+#include <stdlib.h> /* malloc(), free(), NULL */
+#include <sys/types.h> /* size_t, off_t */
+#include <unistd.h> /* read(), close(), sleep(), ftruncate(), */
+ /* lseek() */
+#include <fcntl.h> /* open() */
+#include <sys/file.h> /* flock() */
+#include "zlib.h" /* deflateInit2(), deflate(), deflateEnd() */
+
+#include "gzlog.h" /* interface */
+#define local static
+
+/* log object structure */
+typedef struct {
+ int id; /* object identifier */
+ int fd; /* log file descriptor */
+ off_t extra; /* offset of extra "ap" subfield */
+ off_t mark_off; /* offset of marked data */
+ off_t last_off; /* offset of last block */
+ unsigned long crc; /* uncompressed crc */
+ unsigned long len; /* uncompressed length (modulo 2^32) */
+ unsigned stored; /* length of current stored block */
+} gz_log;
+
+#define GZLOGID 19334 /* gz_log object identifier */
+
+#define LOCK_RETRY 1 /* retry lock once a second */
+#define LOCK_PATIENCE 1200 /* try about twenty minutes before forcing */
+
+/* acquire a lock on a file */
+local int lock(int fd)
+{
+ int patience;
+
+ /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */
+ patience = LOCK_PATIENCE;
+ do {
+ if (flock(fd, LOCK_EX + LOCK_NB) == 0)
+ return 0;
+ (void)sleep(LOCK_RETRY);
+ patience -= LOCK_RETRY;
+ } while (patience > 0);
+
+ /* we've run out of patience -- give up */
+ return -1;
+}
+
+/* release lock */
+local void unlock(int fd)
+{
+ (void)flock(fd, LOCK_UN);
+}
+
+/* release a log object */
+local void log_clean(gz_log *log)
+{
+ unlock(log->fd);
+ (void)close(log->fd);
+ free(log);
+}
+
+/* read an unsigned long from a byte buffer little-endian */
+local unsigned long make_ulg(unsigned char *buf)
+{
+ int n;
+ unsigned long val;
+
+ val = (unsigned long)(*buf++);
+ for (n = 8; n < 32; n += 8)
+ val += (unsigned long)(*buf++) << n;
+ return val;
+}
+
+/* read an off_t from a byte buffer little-endian */
+local off_t make_off(unsigned char *buf)
+{
+ int n;
+ off_t val;
+
+ val = (off_t)(*buf++);
+ for (n = 8; n < 64; n += 8)
+ val += (off_t)(*buf++) << n;
+ return val;
+}
+
+/* write an unsigned long little-endian to byte buffer */
+local void dice_ulg(unsigned long val, unsigned char *buf)
+{
+ int n;
+
+ for (n = 0; n < 4; n++) {
+ *buf++ = val & 0xff;
+ val >>= 8;
+ }
+}
+
+/* write an off_t little-endian to byte buffer */
+local void dice_off(off_t val, unsigned char *buf)
+{
+ int n;
+
+ for (n = 0; n < 8; n++) {
+ *buf++ = val & 0xff;
+ val >>= 8;
+ }
+}
+
+/* initial, empty gzip file for appending */
+local char empty_gz[] = {
+ 0x1f, 0x8b, /* magic gzip id */
+ 8, /* compression method is deflate */
+ 4, /* there is an extra field */
+ 0, 0, 0, 0, /* no modification time provided */
+ 0, 0xff, /* no extra flags, no OS */
+ 20, 0, 'a', 'p', 16, 0, /* extra field with "ap" subfield */
+ 32, 0, 0, 0, 0, 0, 0, 0, /* offset of uncompressed data */
+ 32, 0, 0, 0, 0, 0, 0, 0, /* offset of last block */
+ 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */
+ 0, 0, 0, 0, /* crc */
+ 0, 0, 0, 0 /* uncompressed length */
+};
+
+/* initialize a log object with locking */
+void *gzlog_open(char *path)
+{
+ unsigned xlen;
+ unsigned char temp[20];
+ unsigned sub_len;
+ int good;
+ gz_log *log;
+
+ /* allocate log structure */
+ log = malloc(sizeof(gz_log));
+ if (log == NULL)
+ return NULL;
+ log->id = GZLOGID;
+
+ /* open file, creating it if necessary, and locking it */
+ log->fd = open(path, O_RDWR | O_CREAT, 0600);
+ if (log->fd < 0) {
+ free(log);
+ return NULL;
+ }
+ if (lock(log->fd)) {
+ close(log->fd);
+ free(log);
+ return NULL;
+ }
+
+ /* if file is empty, write new gzip stream */
+ if (lseek(log->fd, 0, SEEK_END) == 0) {
+ if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) {
+ log_clean(log);
+ return NULL;
+ }
+ }
+
+ /* check gzip header */
+ (void)lseek(log->fd, 0, SEEK_SET);
+ if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f ||
+ temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) {
+ log_clean(log);
+ return NULL;
+ }
+
+ /* process extra field to find "ap" sub-field */
+ xlen = temp[10] + (temp[11] << 8);
+ good = 0;
+ while (xlen) {
+ if (xlen < 4 || read(log->fd, temp, 4) != 4)
+ break;
+ sub_len = temp[2];
+ sub_len += temp[3] << 8;
+ xlen -= 4;
+ if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) {
+ good = 1;
+ break;
+ }
+ if (xlen < sub_len)
+ break;
+ (void)lseek(log->fd, sub_len, SEEK_CUR);
+ xlen -= sub_len;
+ }
+ if (!good) {
+ log_clean(log);
+ return NULL;
+ }
+
+ /* read in "ap" sub-field */
+ log->extra = lseek(log->fd, 0, SEEK_CUR);
+ if (read(log->fd, temp, 16) != 16) {
+ log_clean(log);
+ return NULL;
+ }
+ log->mark_off = make_off(temp);
+ log->last_off = make_off(temp + 8);
+
+ /* get crc, length of gzip file */
+ (void)lseek(log->fd, log->last_off, SEEK_SET);
+ if (read(log->fd, temp, 13) != 13 ||
+ memcmp(temp, "\001\000\000\377\377", 5) != 0) {
+ log_clean(log);
+ return NULL;
+ }
+ log->crc = make_ulg(temp + 5);
+ log->len = make_ulg(temp + 9);
+
+ /* set up to write over empty last block */
+ (void)lseek(log->fd, log->last_off + 5, SEEK_SET);
+ log->stored = 0;
+ return (void *)log;
+}
+
+/* maximum amount to put in a stored block before starting a new one */
+#define MAX_BLOCK 16384
+
+/* write a block to a log object */
+int gzlog_write(void *obj, char *data, size_t len)
+{
+ size_t some;
+ unsigned char temp[5];
+ gz_log *log;
+
+ /* check object */
+ log = (gz_log *)obj;
+ if (log == NULL || log->id != GZLOGID)
+ return 1;
+
+ /* write stored blocks until all of the input is written */
+ do {
+ some = MAX_BLOCK - log->stored;
+ if (some > len)
+ some = len;
+ if (write(log->fd, data, some) != some)
+ return 1;
+ log->crc = crc32(log->crc, data, some);
+ log->len += some;
+ len -= some;
+ data += some;
+ log->stored += some;
+
+ /* if the stored block is full, end it and start another */
+ if (log->stored == MAX_BLOCK) {
+ (void)lseek(log->fd, log->last_off, SEEK_SET);
+ temp[0] = 0;
+ dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
+ temp + 1);
+ if (write(log->fd, temp, 5) != 5)
+ return 1;
+ log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
+ (void)lseek(log->fd, 5, SEEK_CUR);
+ log->stored = 0;
+ }
+ } while (len);
+ return 0;
+}
+
+/* recompress the remaining stored deflate data in place */
+local int recomp(gz_log *log)
+{
+ z_stream strm;
+ size_t len, max;
+ unsigned char *in;
+ unsigned char *out;
+ unsigned char temp[16];
+
+ /* allocate space and read it all in (it's around 1 MB) */
+ len = log->last_off - log->mark_off;
+ max = len + (len >> 12) + (len >> 14) + 11;
+ out = malloc(max);
+ if (out == NULL)
+ return 1;
+ in = malloc(len);
+ if (in == NULL) {
+ free(out);
+ return 1;
+ }
+ (void)lseek(log->fd, log->mark_off, SEEK_SET);
+ if (read(log->fd, in, len) != len) {
+ free(in);
+ free(out);
+ return 1;
+ }
+
+ /* recompress in memory, decoding stored data as we go */
+ /* note: this assumes that unsigned is four bytes or more */
+ /* consider not making that assumption */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8,
+ Z_DEFAULT_STRATEGY) != Z_OK) {
+ free(in);
+ free(out);
+ return 1;
+ }
+ strm.next_in = in;
+ strm.avail_out = max;
+ strm.next_out = out;
+ while (len >= 5) {
+ if (strm.next_in[0] != 0)
+ break;
+ strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8);
+ strm.next_in += 5;
+ len -= 5;
+ if (strm.avail_in != 0) {
+ if (len < strm.avail_in)
+ break;
+ len -= strm.avail_in;
+ (void)deflate(&strm, Z_NO_FLUSH);
+ if (strm.avail_in != 0 || strm.avail_out == 0)
+ break;
+ }
+ }
+ (void)deflate(&strm, Z_SYNC_FLUSH);
+ (void)deflateEnd(&strm);
+ free(in);
+ if (len != 0 || strm.avail_out == 0) {
+ free(out);
+ return 1;
+ }
+
+ /* overwrite stored data with compressed data */
+ (void)lseek(log->fd, log->mark_off, SEEK_SET);
+ len = max - strm.avail_out;
+ if (write(log->fd, out, len) != len) {
+ free(out);
+ return 1;
+ }
+ free(out);
+
+ /* write last empty block, crc, and length */
+ log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR);
+ temp[0] = 1;
+ dice_ulg(0xffffL << 16, temp + 1);
+ dice_ulg(log->crc, temp + 5);
+ dice_ulg(log->len, temp + 9);
+ if (write(log->fd, temp, 13) != 13)
+ return 1;
+
+ /* truncate file to discard remaining stored data and old trailer */
+ ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR));
+
+ /* update extra field to point to new last empty block */
+ (void)lseek(log->fd, log->extra, SEEK_SET);
+ dice_off(log->mark_off, temp);
+ dice_off(log->last_off, temp + 8);
+ if (write(log->fd, temp, 16) != 16)
+ return 1;
+ return 0;
+}
+
+/* maximum accumulation of stored blocks before compressing */
+#define MAX_STORED 1048576
+
+/* close log object */
+int gzlog_close(void *obj)
+{
+ unsigned char temp[8];
+ gz_log *log;
+
+ /* check object */
+ log = (gz_log *)obj;
+ if (log == NULL || log->id != GZLOGID)
+ return 1;
+
+ /* go to start of most recent block being written */
+ (void)lseek(log->fd, log->last_off, SEEK_SET);
+
+ /* if some stuff was put there, update block */
+ if (log->stored) {
+ temp[0] = 0;
+ dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
+ temp + 1);
+ if (write(log->fd, temp, 5) != 5)
+ return 1;
+ log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
+ }
+
+ /* write last block (empty) */
+ if (write(log->fd, "\001\000\000\377\377", 5) != 5)
+ return 1;
+
+ /* write updated crc and uncompressed length */
+ dice_ulg(log->crc, temp);
+ dice_ulg(log->len, temp + 4);
+ if (write(log->fd, temp, 8) != 8)
+ return 1;
+
+ /* put offset of that last block in gzip extra block */
+ (void)lseek(log->fd, log->extra + 8, SEEK_SET);
+ dice_off(log->last_off, temp);
+ if (write(log->fd, temp, 8) != 8)
+ return 1;
+
+ /* if more than 1 MB stored, then time to compress it */
+ if (log->last_off - log->mark_off > MAX_STORED) {
+ if (recomp(log))
+ return 1;
+ }
+
+ /* unlock and close file */
+ log_clean(log);
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/gzlog.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/gzlog.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/gzlog.h (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/gzlog.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,58 @@
+/* gzlog.h
+ Copyright (C) 2004 Mark Adler, all rights reserved
+ version 1.0, 26 Nov 2004
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the author be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Mark Adler madler at alumni.caltech.edu
+ */
+
+/*
+ The gzlog object allows writing short messages to a gzipped log file,
+ opening the log file locked for small bursts, and then closing it. The log
+ object works by appending stored data to the gzip file until 1 MB has been
+ accumulated. At that time, the stored data is compressed, and replaces the
+ uncompressed data in the file. The log file is truncated to its new size at
+ that time. After closing, the log file is always valid gzip file that can
+ decompressed to recover what was written.
+
+ A gzip header "extra" field contains two file offsets for appending. The
+ first points to just after the last compressed data. The second points to
+ the last stored block in the deflate stream, which is empty. All of the
+ data between those pointers is uncompressed.
+ */
+
+/* Open a gzlog object, creating the log file if it does not exist. Return
+ NULL on error. Note that gzlog_open() could take a long time to return if
+ there is difficulty in locking the file. */
+void *gzlog_open(char *path);
+
+/* Write to a gzlog object. Return non-zero on error. This function will
+ simply write data to the file uncompressed. Compression of the data
+ will not occur until gzlog_close() is called. It is expected that
+ gzlog_write() is used for a short message, and then gzlog_close() is
+ called. If a large amount of data is to be written, then the application
+ should write no more than 1 MB at a time with gzlog_write() before
+ calling gzlog_close() and then gzlog_open() again. */
+int gzlog_write(void *log, char *data, size_t len);
+
+/* Close a gzlog object. Return non-zero on error. The log file is locked
+ until this function is called. This function will compress stored data
+ at the end of the gzip file if at least 1 MB has been accumulated. Note
+ that the file will not be a valid gzip file until this function completes.
+ */
+int gzlog_close(void *log);
Added: llvm-gcc-4.2/trunk/zlib/examples/zlib_how.html
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/zlib_how.html?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/zlib_how.html (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/zlib_how.html Thu Nov 8 16:56:19 2007
@@ -0,0 +1,523 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
+ "http://www.w3.org/TR/REC-html40/loose.dtd">
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<title>zlib Usage Example</title>
+<!-- Copyright (c) 2004 Mark Adler. -->
+</head>
+<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
+<h2 align="center"> zlib Usage Example </h2>
+We often get questions about how the <tt>deflate()</tt> and <tt>inflate()</tt> functions should be used.
+Users wonder when they should provide more input, when they should use more output,
+what to do with a <tt>Z_BUF_ERROR</tt>, how to make sure the process terminates properly, and
+so on. So for those who have read <tt>zlib.h</tt> (a few times), and
+would like further edification, below is an annotated example in C of simple routines to compress and decompress
+from an input file to an output file using <tt>deflate()</tt> and <tt>inflate()</tt> respectively. The
+annotations are interspersed between lines of the code. So please read between the lines.
+We hope this helps explain some of the intricacies of <em>zlib</em>.
+<p>
+Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
+<pre><b>
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+ Not copyrighted -- provided to the public domain
+ Version 1.2 9 November 2004 Mark Adler */
+
+/* Version history:
+ 1.0 30 Oct 2004 First version
+ 1.1 8 Nov 2004 Add void casting for unused return values
+ Use switch statement for inflate() return values
+ 1.2 9 Nov 2004 Add assertions to document zlib guarantees
+ */
+</b></pre><!-- -->
+We now include the header files for the required definitions. From
+<tt>stdio.h</tt> we use <tt>fopen()</tt>, <tt>fread()</tt>, <tt>fwrite()</tt>,
+<tt>feof()</tt>, <tt>ferror()</tt>, and <tt>fclose()</tt> for file i/o, and
+<tt>fputs()</tt> for error messages. From <tt>string.h</tt> we use
+<tt>strcmp()</tt> for command line argument processing.
+From <tt>assert.h</tt> we use the <tt>assert()</tt> macro.
+From <tt>zlib.h</tt>
+we use the basic compression functions <tt>deflateInit()</tt>,
+<tt>deflate()</tt>, and <tt>deflateEnd()</tt>, and the basic decompression
+functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
+<tt>inflateEnd()</tt>.
+<pre><b>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+</b></pre><!-- -->
+<tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
+from the <em>zlib</em> routines. Larger buffer sizes would be more efficient,
+especially for <tt>inflate()</tt>. If the memory is available, buffers sizes
+on the order of 128K or 256K bytes should be used.
+<pre><b>
+#define CHUNK 16384
+</b></pre><!-- -->
+The <tt>def()</tt> routine compresses data from an input file to an output file. The output data
+will be in the <em>zlib</em> format, which is different from the <em>gzip</em> or <em>zip</em>
+formats. The <em>zlib</em> format has a very small header of only two bytes to identify it as
+a <em>zlib</em> stream and to provide decoding information, and a four-byte trailer with a fast
+check value to verify the integrity of the uncompressed data after decoding.
+<pre><b>
+/* Compress from file source to file dest until EOF on source.
+ def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_STREAM_ERROR if an invalid compression
+ level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+ version of the library linked do not match, or Z_ERRNO if there is
+ an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+</b></pre>
+Here are the local variables for <tt>def()</tt>. <tt>ret</tt> will be used for <em>zlib</em>
+return codes. <tt>flush</tt> will keep track of the current flushing state for <tt>deflate()</tt>,
+which is either no flushing, or flush to completion after the end of the input file is reached.
+<tt>have</tt> is the amount of data returned from <tt>deflate()</tt>. The <tt>strm</tt> structure
+is used to pass information to and from the <em>zlib</em> routines, and to maintain the
+<tt>deflate()</tt> state. <tt>in</tt> and <tt>out</tt> are the input and output buffers for
+<tt>deflate()</tt>.
+<pre><b>
+ int ret, flush;
+ unsigned have;
+ z_stream strm;
+ char in[CHUNK];
+ char out[CHUNK];
+</b></pre><!-- -->
+The first thing we do is to initialize the <em>zlib</em> state for compression using
+<tt>deflateInit()</tt>. This must be done before the first use of <tt>deflate()</tt>.
+The <tt>zalloc</tt>, <tt>zfree</tt>, and <tt>opaque</tt> fields in the <tt>strm</tt>
+structure must be initialized before calling <tt>deflateInit()</tt>. Here they are
+set to the <em>zlib</em> constant <tt>Z_NULL</tt> to request that <em>zlib</em> use
+the default memory allocation routines. An application may also choose to provide
+custom memory allocation routines here. <tt>deflateInit()</tt> will allocate on the
+order of 256K bytes for the internal state.
+(See <a href="zlib_tech.html"><em>zlib Technical Details</em></a>.)
+<p>
+<tt>deflateInit()</tt> is called with a pointer to the structure to be initialized and
+the compression level, which is an integer in the range of -1 to 9. Lower compression
+levels result in faster execution, but less compression. Higher levels result in
+greater compression, but slower execution. The <em>zlib</em> constant Z_DEFAULT_COMPRESSION,
+equal to -1,
+provides a good compromise between compression and speed and is equivalent to level 6.
+Level 0 actually does no compression at all, and in fact expands the data slightly to produce
+the <em>zlib</em> format (it is not a byte-for-byte copy of the input).
+More advanced applications of <em>zlib</em>
+may use <tt>deflateInit2()</tt> here instead. Such an application may want to reduce how
+much memory will be used, at some price in compression. Or it may need to request a
+<em>gzip</em> header and trailer instead of a <em>zlib</em> header and trailer, or raw
+encoding with no header or trailer at all.
+<p>
+We must check the return value of <tt>deflateInit()</tt> against the <em>zlib</em> constant
+<tt>Z_OK</tt> to make sure that it was able to
+allocate memory for the internal state, and that the provided arguments were valid.
+<tt>deflateInit()</tt> will also check that the version of <em>zlib</em> that the <tt>zlib.h</tt>
+file came from matches the version of <em>zlib</em> actually linked with the program. This
+is especially important for environments in which <em>zlib</em> is a shared library.
+<p>
+Note that an application can initialize multiple, independent <em>zlib</em> streams, which can
+operate in parallel. The state information maintained in the structure allows the <em>zlib</em>
+routines to be reentrant.
+<pre><b>
+ /* allocate deflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = deflateInit(&strm, level);
+ if (ret != Z_OK)
+ return ret;
+</b></pre><!-- -->
+With the pleasantries out of the way, now we can get down to business. The outer <tt>do</tt>-loop
+reads all of the input file and exits at the bottom of the loop once end-of-file is reached.
+This loop contains the only call of <tt>deflate()</tt>. So we must make sure that all of the
+input data has been processed and that all of the output data has been generated and consumed
+before we fall out of the loop at the bottom.
+<pre><b>
+ /* compress until end of file */
+ do {
+</b></pre>
+We start off by reading data from the input file. The number of bytes read is put directly
+into <tt>avail_in</tt>, and a pointer to those bytes is put into <tt>next_in</tt>. We also
+check to see if end-of-file on the input has been reached. If we are at the end of file, then <tt>flush</tt> is set to the
+<em>zlib</em> constant <tt>Z_FINISH</tt>, which is later passed to <tt>deflate()</tt> to
+indicate that this is the last chunk of input data to compress. We need to use <tt>feof()</tt>
+to check for end-of-file as opposed to seeing if fewer than <tt>CHUNK</tt> bytes have been read. The
+reason is that if the input file length is an exact multiple of <tt>CHUNK</tt>, we will miss
+the fact that we got to the end-of-file, and not know to tell <tt>deflate()</tt> to finish
+up the compressed stream. If we are not yet at the end of the input, then the <em>zlib</em>
+constant <tt>Z_NO_FLUSH</tt> will be passed to <tt>deflate</tt> to indicate that we are still
+in the middle of the uncompressed data.
+<p>
+If there is an error in reading from the input file, the process is aborted with
+<tt>deflateEnd()</tt> being called to free the allocated <em>zlib</em> state before returning
+the error. We wouldn't want a memory leak, now would we? <tt>deflateEnd()</tt> can be called
+at any time after the state has been initialized. Once that's done, <tt>deflateInit()</tt> (or
+<tt>deflateInit2()</tt>) would have to be called to start a new compression process. There is
+no point here in checking the <tt>deflateEnd()</tt> return code. The deallocation can't fail.
+<pre><b>
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+ strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop passes our chunk of input data to <tt>deflate()</tt>, and then
+keeps calling <tt>deflate()</tt> until it is done producing output. Once there is no more
+new output, <tt>deflate()</tt> is guaranteed to have consumed all of the input, i.e.,
+<tt>avail_in</tt> will be zero.
+<pre><b>
+ /* run deflate() on input until output buffer not full, finish
+ compression if all of source has been read in */
+ do {
+</b></pre>
+Output space is provided to <tt>deflate()</tt> by setting <tt>avail_out</tt> to the number
+of available output bytes and <tt>next_out</tt> to a pointer to that space.
+<pre><b>
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+</b></pre>
+Now we call the compression engine itself, <tt>deflate()</tt>. It takes as many of the
+<tt>avail_in</tt> bytes at <tt>next_in</tt> as it can process, and writes as many as
+<tt>avail_out</tt> bytes to <tt>next_out</tt>. Those counters and pointers are then
+updated past the input data consumed and the output data written. It is the amount of
+output space available that may limit how much input is consumed.
+Hence the inner loop to make sure that
+all of the input is consumed by providing more output space each time. Since <tt>avail_in</tt>
+and <tt>next_in</tt> are updated by <tt>deflate()</tt>, we don't have to mess with those
+between <tt>deflate()</tt> calls until it's all used up.
+<p>
+The parameters to <tt>deflate()</tt> are a pointer to the <tt>strm</tt> structure containing
+the input and output information and the internal compression engine state, and a parameter
+indicating whether and how to flush data to the output. Normally <tt>deflate</tt> will consume
+several K bytes of input data before producing any output (except for the header), in order
+to accumulate statistics on the data for optimum compression. It will then put out a burst of
+compressed data, and proceed to consume more input before the next burst. Eventually,
+<tt>deflate()</tt>
+must be told to terminate the stream, complete the compression with provided input data, and
+write out the trailer check value. <tt>deflate()</tt> will continue to compress normally as long
+as the flush parameter is <tt>Z_NO_FLUSH</tt>. Once the <tt>Z_FINISH</tt> parameter is provided,
+<tt>deflate()</tt> will begin to complete the compressed output stream. However depending on how
+much output space is provided, <tt>deflate()</tt> may have to be called several times until it
+has provided the complete compressed stream, even after it has consumed all of the input. The flush
+parameter must continue to be <tt>Z_FINISH</tt> for those subsequent calls.
+<p>
+There are other values of the flush parameter that are used in more advanced applications. You can
+force <tt>deflate()</tt> to produce a burst of output that encodes all of the input data provided
+so far, even if it wouldn't have otherwise, for example to control data latency on a link with
+compressed data. You can also ask that <tt>deflate()</tt> do that as well as erase any history up to
+that point so that what follows can be decompressed independently, for example for random access
+applications. Both requests will degrade compression by an amount depending on how often such
+requests are made.
+<p>
+<tt>deflate()</tt> has a return value that can indicate errors, yet we do not check it here. Why
+not? Well, it turns out that <tt>deflate()</tt> can do no wrong here. Let's go through
+<tt>deflate()</tt>'s return values and dispense with them one by one. The possible values are
+<tt>Z_OK</tt>, <tt>Z_STREAM_END</tt>, <tt>Z_STREAM_ERROR</tt>, or <tt>Z_BUF_ERROR</tt>. <tt>Z_OK</tt>
+is, well, ok. <tt>Z_STREAM_END</tt> is also ok and will be returned for the last call of
+<tt>deflate()</tt>. This is already guaranteed by calling <tt>deflate()</tt> with <tt>Z_FINISH</tt>
+until it has no more output. <tt>Z_STREAM_ERROR</tt> is only possible if the stream is not
+initialized properly, but we did initialize it properly. There is no harm in checking for
+<tt>Z_STREAM_ERROR</tt> here, for example to check for the possibility that some
+other part of the application inadvertently clobbered the memory containing the <em>zlib</em> state.
+<tt>Z_BUF_ERROR</tt> will be explained further below, but
+suffice it to say that this is simply an indication that <tt>deflate()</tt> could not consume
+more input or produce more output. <tt>deflate()</tt> can be called again with more output space
+or more available input, which it will be in this code.
+<pre><b>
+ ret = deflate(&strm, flush); /* no bad return value */
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+</b></pre>
+Now we compute how much output <tt>deflate()</tt> provided on the last call, which is the
+difference between how much space was provided before the call, and how much output space
+is still available after the call. Then that data, if any, is written to the output file.
+We can then reuse the output buffer for the next call of <tt>deflate()</tt>. Again if there
+is a file i/o error, we call <tt>deflateEnd()</tt> before returning to avoid a memory leak.
+<pre><b>
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+</b></pre>
+The inner <tt>do</tt>-loop is repeated until the last <tt>deflate()</tt> call fails to fill the
+provided output buffer. Then we know that <tt>deflate()</tt> has done as much as it can with
+the provided input, and that all of that input has been consumed. We can then fall out of this
+loop and reuse the input buffer.
+<p>
+The way we tell that <tt>deflate()</tt> has no more output is by seeing that it did not fill
+the output buffer, leaving <tt>avail_out</tt> greater than zero. However suppose that
+<tt>deflate()</tt> has no more output, but just so happened to exactly fill the output buffer!
+<tt>avail_out</tt> is zero, and we can't tell that <tt>deflate()</tt> has done all it can.
+As far as we know, <tt>deflate()</tt>
+has more output for us. So we call it again. But now <tt>deflate()</tt> produces no output
+at all, and <tt>avail_out</tt> remains unchanged as <tt>CHUNK</tt>. That <tt>deflate()</tt> call
+wasn't able to do anything, either consume input or produce output, and so it returns
+<tt>Z_BUF_ERROR</tt>. (See, I told you I'd cover this later.) However this is not a problem at
+all. Now we finally have the desired indication that <tt>deflate()</tt> is really done,
+and so we drop out of the inner loop to provide more input to <tt>deflate()</tt>.
+<p>
+With <tt>flush</tt> set to <tt>Z_FINISH</tt>, this final set of <tt>deflate()</tt> calls will
+complete the output stream. Once that is done, subsequent calls of <tt>deflate()</tt> would return
+<tt>Z_STREAM_ERROR</tt> if the flush parameter is not <tt>Z_FINISH</tt>, and do no more processing
+until the state is reinitialized.
+<p>
+Some applications of <em>zlib</em> have two loops that call <tt>deflate()</tt>
+instead of the single inner loop we have here. The first loop would call
+without flushing and feed all of the data to <tt>deflate()</tt>. The second loop would call
+<tt>deflate()</tt> with no more
+data and the <tt>Z_FINISH</tt> parameter to complete the process. As you can see from this
+example, that can be avoided by simply keeping track of the current flush state.
+<pre><b>
+ } while (strm.avail_out == 0);
+ assert(strm.avail_in == 0); /* all input will be used */
+</b></pre><!-- -->
+Now we check to see if we have already processed all of the input file. That information was
+saved in the <tt>flush</tt> variable, so we see if that was set to <tt>Z_FINISH</tt>. If so,
+then we're done and we fall out of the outer loop. We're guaranteed to get <tt>Z_STREAM_END</tt>
+from the last <tt>deflate()</tt> call, since we ran it until the last chunk of input was
+consumed and all of the output was generated.
+<pre><b>
+ /* done when last data in file processed */
+ } while (flush != Z_FINISH);
+ assert(ret == Z_STREAM_END); /* stream will be complete */
+</b></pre><!-- -->
+The process is complete, but we still need to deallocate the state to avoid a memory leak
+(or rather more like a memory hemorrhage if you didn't do this). Then
+finally we can return with a happy return value.
+<pre><b>
+ /* clean up and return */
+ (void)deflateEnd(&strm);
+ return Z_OK;
+}
+</b></pre><!-- -->
+Now we do the same thing for decompression in the <tt>inf()</tt> routine. <tt>inf()</tt>
+decompresses what is hopefully a valid <em>zlib</em> stream from the input file and writes the
+uncompressed data to the output file. Much of the discussion above for <tt>def()</tt>
+applies to <tt>inf()</tt> as well, so the discussion here will focus on the differences between
+the two.
+<pre><b>
+/* Decompress from file source to file dest until stream ends or EOF.
+ inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_DATA_ERROR if the deflate data is
+ invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+ the version of the library linked do not match, or Z_ERRNO if there
+ is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+</b></pre>
+The local variables have the same functionality as they do for <tt>def()</tt>. The
+only difference is that there is no <tt>flush</tt> variable, since <tt>inflate()</tt>
+can tell from the <em>zlib</em> stream itself when the stream is complete.
+<pre><b>
+ int ret;
+ unsigned have;
+ z_stream strm;
+ char in[CHUNK];
+ char out[CHUNK];
+</b></pre><!-- -->
+The initialization of the state is the same, except that there is no compression level,
+of course, and two more elements of the structure are initialized. <tt>avail_in</tt>
+and <tt>next_in</tt> must be initialized before calling <tt>inflateInit()</tt>. This
+is because the application has the option to provide the start of the zlib stream in
+order for <tt>inflateInit()</tt> to have access to information about the compression
+method to aid in memory allocation. In the current implementation of <em>zlib</em>
+(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of
+<tt>inflate()</tt> anyway. However those fields must be initialized since later versions
+of <em>zlib</em> that provide more compression methods may take advantage of this interface.
+In any case, no decompression is performed by <tt>inflateInit()</tt>, so the
+<tt>avail_out</tt> and <tt>next_out</tt> fields do not need to be initialized before calling.
+<p>
+Here <tt>avail_in</tt> is set to zero and <tt>next_in</tt> is set to <tt>Z_NULL</tt> to
+indicate that no input data is being provided.
+<pre><b>
+ /* allocate inflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm);
+ if (ret != Z_OK)
+ return ret;
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop decompresses input until <tt>inflate()</tt> indicates
+that it has reached the end of the compressed data and has produced all of the uncompressed
+output. This is in contrast to <tt>def()</tt> which processes all of the input file.
+If end-of-file is reached before the compressed data self-terminates, then the compressed
+data is incomplete and an error is returned.
+<pre><b>
+ /* decompress until deflate stream ends or end of file */
+ do {
+</b></pre>
+We read input data and set the <tt>strm</tt> structure accordingly. If we've reached the
+end of the input file, then we leave the outer loop and report an error, since the
+compressed data is incomplete. Note that we may read more data than is eventually consumed
+by <tt>inflate()</tt>, if the input file continues past the <em>zlib</em> stream.
+For applications where <em>zlib</em> streams are embedded in other data, this routine would
+need to be modified to return the unused data, or at least indicate how much of the input
+data was not used, so the application would know where to pick up after the <em>zlib</em> stream.
+<pre><b>
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ if (strm.avail_in == 0)
+ break;
+ strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop has the same function it did in <tt>def()</tt>, which is to
+keep calling <tt>inflate()</tt> until has generated all of the output it can with the
+provided input.
+<pre><b>
+ /* run inflate() on input until output buffer not full */
+ do {
+</b></pre>
+Just like in <tt>def()</tt>, the same output space is provided for each call of <tt>inflate()</tt>.
+<pre><b>
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+</b></pre>
+Now we run the decompression engine itself. There is no need to adjust the flush parameter, since
+the <em>zlib</em> format is self-terminating. The main difference here is that there are
+return values that we need to pay attention to. <tt>Z_DATA_ERROR</tt>
+indicates that <tt>inflate()</tt> detected an error in the <em>zlib</em> compressed data format,
+which means that either the data is not a <em>zlib</em> stream to begin with, or that the data was
+corrupted somewhere along the way since it was compressed. The other error to be processed is
+<tt>Z_MEM_ERROR</tt>, which can occur since memory allocation is deferred until <tt>inflate()</tt>
+needs it, unlike <tt>deflate()</tt>, whose memory is allocated at the start by <tt>deflateInit()</tt>.
+<p>
+Advanced applications may use
+<tt>deflateSetDictionary()</tt> to prime <tt>deflate()</tt> with a set of likely data to improve the
+first 32K or so of compression. This is noted in the <em>zlib</em> header, so <tt>inflate()</tt>
+requests that that dictionary be provided before it can start to decompress. Without the dictionary,
+correct decompression is not possible. For this routine, we have no idea what the dictionary is,
+so the <tt>Z_NEED_DICT</tt> indication is converted to a <tt>Z_DATA_ERROR</tt>.
+<p>
+<tt>inflate()</tt> can also return <tt>Z_STREAM_ERROR</tt>, which should not be possible here,
+but could be checked for as noted above for <tt>def()</tt>. <tt>Z_BUF_ERROR</tt> does not need to be
+checked for here, for the same reasons noted for <tt>def()</tt>. <tt>Z_STREAM_END</tt> will be
+checked for later.
+<pre><b>
+ ret = inflate(&strm, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR; /* and fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ (void)inflateEnd(&strm);
+ return ret;
+ }
+</b></pre>
+The output of <tt>inflate()</tt> is handled identically to that of <tt>deflate()</tt>.
+<pre><b>
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+</b></pre>
+The inner <tt>do</tt>-loop ends when <tt>inflate()</tt> has no more output as indicated
+by not filling the output buffer, just as for <tt>deflate()</tt>. In this case, we cannot
+assert that <tt>strm.avail_in</tt> will be zero, since the deflate stream may end before the file
+does.
+<pre><b>
+ } while (strm.avail_out == 0);
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop ends when <tt>inflate()</tt> reports that it has reached the
+end of the input <em>zlib</em> stream, has completed the decompression and integrity
+check, and has provided all of the output. This is indicated by the <tt>inflate()</tt>
+return value <tt>Z_STREAM_END</tt>. The inner loop is guaranteed to leave <tt>ret</tt>
+equal to <tt>Z_STREAM_END</tt> if the last chunk of the input file read contained the end
+of the <em>zlib</em> stream. So if the return value is not <tt>Z_STREAM_END</tt>, the
+loop continues to read more input.
+<pre><b>
+ /* done when inflate() says it's done */
+ } while (ret != Z_STREAM_END);
+</b></pre><!-- -->
+At this point, decompression successfully completed, or we broke out of the loop due to no
+more data being available from the input file. If the last <tt>inflate()</tt> return value
+is not <tt>Z_STREAM_END</tt>, then the <em>zlib</em> stream was incomplete and a data error
+is returned. Otherwise, we return with a happy return value. Of course, <tt>inflateEnd()</tt>
+is called first to avoid a memory leak.
+<pre><b>
+ /* clean up and return */
+ (void)inflateEnd(&strm);
+ return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+</b></pre><!-- -->
+That ends the routines that directly use <em>zlib</em>. The following routines make this
+a command-line program by running data through the above routines from <tt>stdin</tt> to
+<tt>stdout</tt>, and handling any errors reported by <tt>def()</tt> or <tt>inf()</tt>.
+<p>
+<tt>zerr()</tt> is used to interpret the possible error codes from <tt>def()</tt>
+and <tt>inf()</tt>, as detailed in their comments above, and print out an error message.
+Note that these are only a subset of the possible return values from <tt>deflate()</tt>
+and <tt>inflate()</tt>.
+<pre><b>
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+ fputs("zpipe: ", stderr);
+ switch (ret) {
+ case Z_ERRNO:
+ if (ferror(stdin))
+ fputs("error reading stdin\n", stderr);
+ if (ferror(stdout))
+ fputs("error writing stdout\n", stderr);
+ break;
+ case Z_STREAM_ERROR:
+ fputs("invalid compression level\n", stderr);
+ break;
+ case Z_DATA_ERROR:
+ fputs("invalid or incomplete deflate data\n", stderr);
+ break;
+ case Z_MEM_ERROR:
+ fputs("out of memory\n", stderr);
+ break;
+ case Z_VERSION_ERROR:
+ fputs("zlib version mismatch!\n", stderr);
+ }
+}
+</b></pre><!-- -->
+Here is the <tt>main()</tt> routine used to test <tt>def()</tt> and <tt>inf()</tt>. The
+<tt>zpipe</tt> command is simply a compression pipe from <tt>stdin</tt> to <tt>stdout</tt>, if
+no arguments are given, or it is a decompression pipe if <tt>zpipe -d</tt> is used. If any other
+arguments are provided, no compression or decompression is performed. Instead a usage
+message is displayed. Examples are <tt>zpipe < foo.txt > foo.txt.z</tt> to compress, and
+<tt>zpipe -d < foo.txt.z > foo.txt</tt> to decompress.
+<pre><b>
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+ int ret;
+
+ /* do compression if no arguments */
+ if (argc == 1) {
+ ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* do decompression if -d specified */
+ else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+ ret = inf(stdin, stdout);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* otherwise, report usage */
+ else {
+ fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+ return 1;
+ }
+}
+</b></pre>
+<hr>
+<i>Copyright (c) 2004 by Mark Adler<br>Last modified 13 November 2004</i>
+</body>
+</html>
Added: llvm-gcc-4.2/trunk/zlib/examples/zpipe.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/zpipe.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/zpipe.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/zpipe.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,191 @@
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+ Not copyrighted -- provided to the public domain
+ Version 1.2 9 November 2004 Mark Adler */
+
+/* Version history:
+ 1.0 30 Oct 2004 First version
+ 1.1 8 Nov 2004 Add void casting for unused return values
+ Use switch statement for inflate() return values
+ 1.2 9 Nov 2004 Add assertions to document zlib guarantees
+ 1.3 6 Apr 2005 Remove incorrect assertion in inf()
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+#define CHUNK 16384
+
+/* Compress from file source to file dest until EOF on source.
+ def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_STREAM_ERROR if an invalid compression
+ level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+ version of the library linked do not match, or Z_ERRNO if there is
+ an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+ int ret, flush;
+ unsigned have;
+ z_stream strm;
+ char in[CHUNK];
+ char out[CHUNK];
+
+ /* allocate deflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ ret = deflateInit(&strm, level);
+ if (ret != Z_OK)
+ return ret;
+
+ /* compress until end of file */
+ do {
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+ strm.next_in = in;
+
+ /* run deflate() on input until output buffer not full, finish
+ compression if all of source has been read in */
+ do {
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+ ret = deflate(&strm, flush); /* no bad return value */
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)deflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ } while (strm.avail_out == 0);
+ assert(strm.avail_in == 0); /* all input will be used */
+
+ /* done when last data in file processed */
+ } while (flush != Z_FINISH);
+ assert(ret == Z_STREAM_END); /* stream will be complete */
+
+ /* clean up and return */
+ (void)deflateEnd(&strm);
+ return Z_OK;
+}
+
+/* Decompress from file source to file dest until stream ends or EOF.
+ inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+ allocated for processing, Z_DATA_ERROR if the deflate data is
+ invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+ the version of the library linked do not match, or Z_ERRNO if there
+ is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+ int ret;
+ unsigned have;
+ z_stream strm;
+ char in[CHUNK];
+ char out[CHUNK];
+
+ /* allocate inflate state */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm);
+ if (ret != Z_OK)
+ return ret;
+
+ /* decompress until deflate stream ends or end of file */
+ do {
+ strm.avail_in = fread(in, 1, CHUNK, source);
+ if (ferror(source)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ if (strm.avail_in == 0)
+ break;
+ strm.next_in = in;
+
+ /* run inflate() on input until output buffer not full */
+ do {
+ strm.avail_out = CHUNK;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_NO_FLUSH);
+ assert(ret != Z_STREAM_ERROR); /* state not clobbered */
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR; /* and fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ (void)inflateEnd(&strm);
+ return ret;
+ }
+ have = CHUNK - strm.avail_out;
+ if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+ (void)inflateEnd(&strm);
+ return Z_ERRNO;
+ }
+ } while (strm.avail_out == 0);
+
+ /* done when inflate() says it's done */
+ } while (ret != Z_STREAM_END);
+
+ /* clean up and return */
+ (void)inflateEnd(&strm);
+ return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+ fputs("zpipe: ", stderr);
+ switch (ret) {
+ case Z_ERRNO:
+ if (ferror(stdin))
+ fputs("error reading stdin\n", stderr);
+ if (ferror(stdout))
+ fputs("error writing stdout\n", stderr);
+ break;
+ case Z_STREAM_ERROR:
+ fputs("invalid compression level\n", stderr);
+ break;
+ case Z_DATA_ERROR:
+ fputs("invalid or incomplete deflate data\n", stderr);
+ break;
+ case Z_MEM_ERROR:
+ fputs("out of memory\n", stderr);
+ break;
+ case Z_VERSION_ERROR:
+ fputs("zlib version mismatch!\n", stderr);
+ }
+}
+
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+ int ret;
+
+ /* do compression if no arguments */
+ if (argc == 1) {
+ ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* do decompression if -d specified */
+ else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+ ret = inf(stdin, stdout);
+ if (ret != Z_OK)
+ zerr(ret);
+ return ret;
+ }
+
+ /* otherwise, report usage */
+ else {
+ fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+ return 1;
+ }
+}
Added: llvm-gcc-4.2/trunk/zlib/examples/zran.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/examples/zran.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/examples/zran.c (added)
+++ llvm-gcc-4.2/trunk/zlib/examples/zran.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,404 @@
+/* zran.c -- example of zlib/gzip stream indexing and random access
+ * Copyright (C) 2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ Version 1.0 29 May 2005 Mark Adler */
+
+/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
+ for random access of a compressed file. A file containing a zlib or gzip
+ stream is provided on the command line. The compressed stream is decoded in
+ its entirety, and an index built with access points about every SPAN bytes
+ in the uncompressed output. The compressed file is left open, and can then
+ be read randomly, having to decompress on the average SPAN/2 uncompressed
+ bytes before getting to the desired block of data.
+
+ An access point can be created at the start of any deflate block, by saving
+ the starting file offset and bit of that block, and the 32K bytes of
+ uncompressed data that precede that block. Also the uncompressed offset of
+ that block is saved to provide a referece for locating a desired starting
+ point in the uncompressed stream. build_index() works by decompressing the
+ input zlib or gzip stream a block at a time, and at the end of each block
+ deciding if enough uncompressed data has gone by to justify the creation of
+ a new access point. If so, that point is saved in a data structure that
+ grows as needed to accommodate the points.
+
+ To use the index, an offset in the uncompressed data is provided, for which
+ the latest accees point at or preceding that offset is located in the index.
+ The input file is positioned to the specified location in the index, and if
+ necessary the first few bits of the compressed data is read from the file.
+ inflate is initialized with those bits and the 32K of uncompressed data, and
+ the decompression then proceeds until the desired offset in the file is
+ reached. Then the decompression continues to read the desired uncompressed
+ data from the file.
+
+ Another approach would be to generate the index on demand. In that case,
+ requests for random access reads from the compressed data would try to use
+ the index, but if a read far enough past the end of the index is required,
+ then further index entries would be generated and added.
+
+ There is some fair bit of overhead to starting inflation for the random
+ access, mainly copying the 32K byte dictionary. So if small pieces of the
+ file are being accessed, it would make sense to implement a cache to hold
+ some lookahead and avoid many calls to extract() for small lengths.
+
+ Another way to build an index would be to use inflateCopy(). That would
+ not be constrained to have access points at block boundaries, but requires
+ more memory per access point, and also cannot be saved to file due to the
+ use of pointers in the state. The approach here allows for storage of the
+ index in a file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+
+#define local static
+
+#define SPAN 1048576L /* desired distance between access points */
+#define WINSIZE 32768U /* sliding window size */
+#define CHUNK 16384 /* file input buffer size */
+
+/* access point entry */
+struct point {
+ off_t out; /* corresponding offset in uncompressed data */
+ off_t in; /* offset in input file of first full byte */
+ int bits; /* number of bits (1-7) from byte at in - 1, or 0 */
+ unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */
+};
+
+/* access point list */
+struct access {
+ int have; /* number of list entries filled in */
+ int size; /* number of list entries allocated */
+ struct point *list; /* allocated list */
+};
+
+/* Deallocate an index built by build_index() */
+local void free_index(struct access *index)
+{
+ if (index != NULL) {
+ free(index->list);
+ free(index);
+ }
+}
+
+/* Add an entry to the access point list. If out of memory, deallocate the
+ existing list and return NULL. */
+local struct access *addpoint(struct access *index, int bits,
+ off_t in, off_t out, unsigned left, unsigned char *window)
+{
+ struct point *next;
+
+ /* if list is empty, create it (start with eight points) */
+ if (index == NULL) {
+ index = malloc(sizeof(struct access));
+ if (index == NULL) return NULL;
+ index->list = malloc(sizeof(struct point) << 3);
+ if (index->list == NULL) {
+ free(index);
+ return NULL;
+ }
+ index->size = 8;
+ index->have = 0;
+ }
+
+ /* if list is full, make it bigger */
+ else if (index->have == index->size) {
+ index->size <<= 1;
+ next = realloc(index->list, sizeof(struct point) * index->size);
+ if (next == NULL) {
+ free_index(index);
+ return NULL;
+ }
+ index->list = next;
+ }
+
+ /* fill in entry and increment how many we have */
+ next = index->list + index->have;
+ next->bits = bits;
+ next->in = in;
+ next->out = out;
+ if (left)
+ memcpy(next->window, window + WINSIZE - left, left);
+ if (left < WINSIZE)
+ memcpy(next->window + left, window, WINSIZE - left);
+ index->have++;
+
+ /* return list, possibly reallocated */
+ return index;
+}
+
+/* Make one entire pass through the compressed stream and build an index, with
+ access points about every span bytes of uncompressed output -- span is
+ chosen to balance the speed of random access against the memory requirements
+ of the list, about 32K bytes per access point. Note that data after the end
+ of the first zlib or gzip stream in the file is ignored. build_index()
+ returns the number of access points on success (>= 1), Z_MEM_ERROR for out
+ of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
+ file read error. On success, *built points to the resulting index. */
+local int build_index(FILE *in, off_t span, struct access **built)
+{
+ int ret;
+ off_t totin, totout; /* our own total counters to avoid 4GB limit */
+ off_t last; /* totout value of last access point */
+ struct access *index; /* access points being generated */
+ z_stream strm;
+ unsigned char input[CHUNK];
+ unsigned char window[WINSIZE];
+
+ /* initialize inflate */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */
+ if (ret != Z_OK)
+ return ret;
+
+ /* inflate the input, maintain a sliding window, and build an index -- this
+ also validates the integrity of the compressed data using the check
+ information at the end of the gzip or zlib stream */
+ totin = totout = last = 0;
+ index = NULL; /* will be allocated by first addpoint() */
+ strm.avail_out = 0;
+ do {
+ /* get some compressed data from input file */
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto build_index_error;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto build_index_error;
+ }
+ strm.next_in = input;
+
+ /* process all of that, or until end of stream */
+ do {
+ /* reset sliding window if necessary */
+ if (strm.avail_out == 0) {
+ strm.avail_out = WINSIZE;
+ strm.next_out = window;
+ }
+
+ /* inflate until out of input, output, or at end of block --
+ update the total input and output counters */
+ totin += strm.avail_in;
+ totout += strm.avail_out;
+ ret = inflate(&strm, Z_BLOCK); /* return at end of block */
+ totin -= strm.avail_in;
+ totout -= strm.avail_out;
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto build_index_error;
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* if at end of block, consider adding an index entry (note that if
+ data_type indicates an end-of-block, then all of the
+ uncompressed data from that block has been delivered, and none
+ of the compressed data after that block has been consumed,
+ except for up to seven bits) -- the totout == 0 provides an
+ entry point after the zlib or gzip header, and assures that the
+ index always has at least one access point; we avoid creating an
+ access point after the last block by checking bit 6 of data_type
+ */
+ if ((strm.data_type & 128) && !(strm.data_type & 64) &&
+ (totout == 0 || totout - last > span)) {
+ index = addpoint(index, strm.data_type & 7, totin,
+ totout, strm.avail_out, window);
+ if (index == NULL) {
+ ret = Z_MEM_ERROR;
+ goto build_index_error;
+ }
+ last = totout;
+ }
+ } while (strm.avail_in != 0);
+ } while (ret != Z_STREAM_END);
+
+ /* clean up and return index (release unused entries in list) */
+ (void)inflateEnd(&strm);
+ index = realloc(index, sizeof(struct point) * index->have);
+ index->size = index->have;
+ *built = index;
+ return index->size;
+
+ /* return error */
+ build_index_error:
+ (void)inflateEnd(&strm);
+ if (index != NULL)
+ free_index(index);
+ return ret;
+}
+
+/* Use the index to read len bytes from offset into buf, return bytes read or
+ negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
+ the end of the uncompressed data, then extract() will return a value less
+ than len, indicating how much as actually read into buf. This function
+ should not return a data error unless the file was modified since the index
+ was generated. extract() may also return Z_ERRNO if there is an error on
+ reading or seeking the input file. */
+local int extract(FILE *in, struct access *index, off_t offset,
+ unsigned char *buf, int len)
+{
+ int ret, skip;
+ z_stream strm;
+ struct point *here;
+ unsigned char input[CHUNK];
+ unsigned char discard[WINSIZE];
+
+ /* proceed only if something reasonable to do */
+ if (len < 0)
+ return 0;
+
+ /* find where in stream to start */
+ here = index->list;
+ ret = index->have;
+ while (--ret && here[1].out <= offset)
+ here++;
+
+ /* initialize file and inflate state to start there */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -15); /* raw inflate */
+ if (ret != Z_OK)
+ return ret;
+ ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
+ if (ret == -1)
+ goto extract_ret;
+ if (here->bits) {
+ ret = getc(in);
+ if (ret == -1) {
+ ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
+ }
+ (void)inflateSetDictionary(&strm, here->window, WINSIZE);
+
+ /* skip uncompressed bytes until offset reached, then satisfy request */
+ offset -= here->out;
+ strm.avail_in = 0;
+ skip = 1; /* while skipping to offset */
+ do {
+ /* define where to put uncompressed data, and how much */
+ if (offset == 0 && skip) { /* at offset now */
+ strm.avail_out = len;
+ strm.next_out = buf;
+ skip = 0; /* only do this once */
+ }
+ if (offset > WINSIZE) { /* skip WINSIZE bytes */
+ strm.avail_out = WINSIZE;
+ strm.next_out = discard;
+ offset -= WINSIZE;
+ }
+ else if (offset != 0) { /* last skip */
+ strm.avail_out = (unsigned)offset;
+ strm.next_out = discard;
+ offset = 0;
+ }
+
+ /* uncompress until avail_out filled, or end of stream */
+ do {
+ if (strm.avail_in == 0) {
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto extract_ret;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ strm.next_in = input;
+ }
+ ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto extract_ret;
+ if (ret == Z_STREAM_END)
+ break;
+ } while (strm.avail_out != 0);
+
+ /* if reach end of stream, then don't keep trying to get more */
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* do until offset reached and requested data read, or stream ends */
+ } while (skip);
+
+ /* compute number of uncompressed bytes read after offset */
+ ret = skip ? 0 : len - strm.avail_out;
+
+ /* clean up and return bytes read or error */
+ extract_ret:
+ (void)inflateEnd(&strm);
+ return ret;
+}
+
+/* Demonstrate the use of build_index() and extract() by processing the file
+ provided on the command line, and the extracting 16K from about 2/3rds of
+ the way through the uncompressed output, and writing that to stdout. */
+int main(int argc, char **argv)
+{
+ int len;
+ off_t offset;
+ FILE *in;
+ struct access *index;
+ unsigned char buf[CHUNK];
+
+ /* open input file */
+ if (argc != 2) {
+ fprintf(stderr, "usage: zran file.gz\n");
+ return 1;
+ }
+ in = fopen(argv[1], "rb");
+ if (in == NULL) {
+ fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
+ return 1;
+ }
+
+ /* build index */
+ len = build_index(in, SPAN, &index);
+ if (len < 0) {
+ fclose(in);
+ switch (len) {
+ case Z_MEM_ERROR:
+ fprintf(stderr, "zran: out of memory\n");
+ break;
+ case Z_DATA_ERROR:
+ fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
+ break;
+ case Z_ERRNO:
+ fprintf(stderr, "zran: read error on %s\n", argv[1]);
+ break;
+ default:
+ fprintf(stderr, "zran: error %d while building index\n", len);
+ }
+ return 1;
+ }
+ fprintf(stderr, "zran: built index with %d access points\n", len);
+
+ /* use index by reading some bytes from an arbitrary offset */
+ offset = (index->list[index->have - 1].out << 1) / 3;
+ len = extract(in, index, offset, buf, CHUNK);
+ if (len < 0)
+ fprintf(stderr, "zran: extraction failed: %s error\n",
+ len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
+ else {
+ fwrite(buf, 1, len, stdout);
+ fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
+ }
+
+ /* clean up and exit */
+ free_index(index);
+ fclose(in);
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/gzio.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/gzio.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/gzio.c (added)
+++ llvm-gcc-4.2/trunk/zlib/gzio.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1026 @@
+/* gzio.c -- IO on .gz files
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
+ */
+
+/* @(#) $Id: gzio.c,v 1.1.1.2 2002/03/11 21:53:24 tromey Exp $ */
+
+#include <stdio.h>
+
+#include "zutil.h"
+
+#ifdef NO_DEFLATE /* for compatibility with old definition */
+# define NO_GZCOMPRESS
+#endif
+
+#ifndef NO_DUMMY_DECL
+struct internal_state {int dummy;}; /* for buggy compilers */
+#endif
+
+#ifndef Z_BUFSIZE
+# ifdef MAXSEG_64K
+# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+# else
+# define Z_BUFSIZE 16384
+# endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+# define Z_PRINTF_BUFSIZE 4096
+#endif
+
+#ifdef __MVS__
+# pragma map (fdopen , "\174\174FDOPEN")
+ FILE *fdopen(int, const char *);
+#endif
+
+#ifndef STDC
+extern voidp malloc OF((uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+#define ALLOC(size) malloc(size)
+#define TRYFREE(p) {if (p) free(p);}
+
+static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define RESERVED 0xE0 /* bits 5..7: reserved */
+
+typedef struct gz_stream {
+ z_stream stream;
+ int z_err; /* error code for last stream operation */
+ int z_eof; /* set if end of input file */
+ FILE *file; /* .gz file */
+ Byte *inbuf; /* input buffer */
+ Byte *outbuf; /* output buffer */
+ uLong crc; /* crc32 of uncompressed data */
+ char *msg; /* error message */
+ char *path; /* path name for debugging only */
+ int transparent; /* 1 if input file is not a .gz file */
+ char mode; /* 'w' or 'r' */
+ z_off_t start; /* start of compressed data in file (header skipped) */
+ z_off_t in; /* bytes into deflate or inflate */
+ z_off_t out; /* bytes out of deflate or inflate */
+ int back; /* one character push-back */
+ int last; /* true if push-back is last character */
+} gz_stream;
+
+
+local gzFile gz_open OF((const char *path, const char *mode, int fd));
+local int do_flush OF((gzFile file, int flush));
+local int get_byte OF((gz_stream *s));
+local void check_header OF((gz_stream *s));
+local int destroy OF((gz_stream *s));
+local void putLong OF((FILE *file, uLong x));
+local uLong getLong OF((gz_stream *s));
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb"). The file is given either by file descriptor
+ or path name (if fd == -1).
+ gz_open returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression state; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is Z_MEM_ERROR).
+*/
+local gzFile gz_open (path, mode, fd)
+ const char *path;
+ const char *mode;
+ int fd;
+{
+ int err;
+ int level = Z_DEFAULT_COMPRESSION; /* compression level */
+ int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
+ char *p = (char*)mode;
+ gz_stream *s;
+ char fmode[80]; /* copy of mode, without the compression level */
+ char *m = fmode;
+
+ if (!path || !mode) return Z_NULL;
+
+ s = (gz_stream *)ALLOC(sizeof(gz_stream));
+ if (!s) return Z_NULL;
+
+ s->stream.zalloc = (alloc_func)0;
+ s->stream.zfree = (free_func)0;
+ s->stream.opaque = (voidpf)0;
+ s->stream.next_in = s->inbuf = Z_NULL;
+ s->stream.next_out = s->outbuf = Z_NULL;
+ s->stream.avail_in = s->stream.avail_out = 0;
+ s->file = NULL;
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->in = 0;
+ s->out = 0;
+ s->back = EOF;
+ s->crc = crc32(0L, Z_NULL, 0);
+ s->msg = NULL;
+ s->transparent = 0;
+
+ s->path = (char*)ALLOC(strlen(path)+1);
+ if (s->path == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ strcpy(s->path, path); /* do this early for debugging */
+
+ s->mode = '\0';
+ do {
+ if (*p == 'r') s->mode = 'r';
+ if (*p == 'w' || *p == 'a') s->mode = 'w';
+ if (*p >= '0' && *p <= '9') {
+ level = *p - '0';
+ } else if (*p == 'f') {
+ strategy = Z_FILTERED;
+ } else if (*p == 'h') {
+ strategy = Z_HUFFMAN_ONLY;
+ } else if (*p == 'R') {
+ strategy = Z_RLE;
+ } else {
+ *m++ = *p; /* copy the mode */
+ }
+ } while (*p++ && m != fmode + sizeof(fmode));
+ if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateInit2(&(s->stream), level,
+ Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
+ /* windowBits is passed < 0 to suppress zlib header */
+
+ s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+#endif
+ if (err != Z_OK || s->outbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ } else {
+ s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
+
+ err = inflateInit2(&(s->stream), -MAX_WBITS);
+ /* windowBits is passed < 0 to tell that there is no zlib header.
+ * Note that in this case inflate *requires* an extra "dummy" byte
+ * after the compressed stream in order to complete decompression and
+ * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+ * present after the compressed stream.
+ */
+ if (err != Z_OK || s->inbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+
+ errno = 0;
+ s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+
+ if (s->file == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ if (s->mode == 'w') {
+ /* Write a very simple .gz header:
+ */
+ fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
+ Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+ s->start = 10L;
+ /* We use 10L instead of ftell(s->file) to because ftell causes an
+ * fflush on some systems. This version of the library doesn't use
+ * start anyway in write mode, so this initialization is not
+ * necessary.
+ */
+ } else {
+ check_header(s); /* skip the .gz header */
+ s->start = ftell(s->file) - s->stream.avail_in;
+ }
+
+ return (gzFile)s;
+}
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing.
+*/
+gzFile ZEXPORT gzopen (path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open (path, mode, -1);
+}
+
+/* ===========================================================================
+ Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+ to mimic the behavio(u)r of fdopen.
+*/
+gzFile ZEXPORT gzdopen (fd, mode)
+ int fd;
+ const char *mode;
+{
+ char name[46]; /* allow for up to 128-bit integers */
+
+ if (fd < 0) return (gzFile)Z_NULL;
+ sprintf(name, "<fd:%d>", fd); /* for debugging */
+
+ return gz_open (name, mode, fd);
+}
+
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+ gzFile file;
+ int level;
+ int strategy;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ /* Make room to allow flushing */
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+
+ return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+ Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+ for end of file.
+ IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+ gz_stream *s;
+{
+ if (s->z_eof) return EOF;
+ if (s->stream.avail_in == 0) {
+ errno = 0;
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) s->z_err = Z_ERRNO;
+ return EOF;
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->stream.avail_in--;
+ return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+ Check the gzip header of a gz_stream opened for reading. Set the stream
+ mode to transparent if the gzip magic header is not present; set s->err
+ to Z_DATA_ERROR if the magic header is present but the rest of the header
+ is incorrect.
+ IN assertion: the stream s has already been created sucessfully;
+ s->stream.avail_in is zero for the first time, but may be non-zero
+ for concatenated .gz files.
+*/
+local void check_header(s)
+ gz_stream *s;
+{
+ int method; /* method byte */
+ int flags; /* flags byte */
+ uInt len;
+ int c;
+
+ /* Assure two bytes in the buffer so we can peek ahead -- handle case
+ where first byte of header is at the end of the buffer after the last
+ gzip segment */
+ len = s->stream.avail_in;
+ if (len < 2) {
+ if (len) s->inbuf[0] = s->stream.next_in[0];
+ errno = 0;
+ len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
+ if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
+ s->stream.avail_in += len;
+ s->stream.next_in = s->inbuf;
+ if (s->stream.avail_in < 2) {
+ s->transparent = s->stream.avail_in;
+ return;
+ }
+ }
+
+ /* Peek ahead to check the gzip magic header */
+ if (s->stream.next_in[0] != gz_magic[0] ||
+ s->stream.next_in[1] != gz_magic[1]) {
+ s->transparent = 1;
+ return;
+ }
+ s->stream.avail_in -= 2;
+ s->stream.next_in += 2;
+
+ /* Check the rest of the gzip header */
+ method = get_byte(s);
+ flags = get_byte(s);
+ if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+ s->z_err = Z_DATA_ERROR;
+ return;
+ }
+
+ /* Discard time, xflags and OS code: */
+ for (len = 0; len < 6; len++) (void)get_byte(s);
+
+ if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+ len = (uInt)get_byte(s);
+ len += ((uInt)get_byte(s))<<8;
+ /* len is garbage if EOF but the loop below will quit anyway */
+ while (len-- != 0 && get_byte(s) != EOF) ;
+ }
+ if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & COMMENT) != 0) { /* skip the .gz file comment */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & HEAD_CRC) != 0) { /* skip the header crc */
+ for (len = 0; len < 2; len++) (void)get_byte(s);
+ }
+ s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+ Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+ gz_stream *s;
+{
+ int err = Z_OK;
+
+ if (!s) return Z_STREAM_ERROR;
+
+ TRYFREE(s->msg);
+
+ if (s->stream.state != NULL) {
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateEnd(&(s->stream));
+#endif
+ } else if (s->mode == 'r') {
+ err = inflateEnd(&(s->stream));
+ }
+ }
+ if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+ if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+ err = Z_ERRNO;
+ }
+ if (s->z_err < 0) err = s->z_err;
+
+ TRYFREE(s->inbuf);
+ TRYFREE(s->outbuf);
+ TRYFREE(s->path);
+ TRYFREE(s);
+ return err;
+}
+
+/* ===========================================================================
+ Reads the given number of uncompressed bytes from the compressed file.
+ gzread returns the number of bytes actually read (0 for end of file).
+*/
+int ZEXPORT gzread (file, buf, len)
+ gzFile file;
+ voidp buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+ Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+ Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */
+
+ if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
+
+ if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
+ if (s->z_err == Z_STREAM_END) return 0; /* EOF */
+
+ next_out = (Byte*)buf;
+ s->stream.next_out = (Bytef*)buf;
+ s->stream.avail_out = len;
+
+ if (s->stream.avail_out && s->back != EOF) {
+ *next_out++ = s->back;
+ s->stream.next_out++;
+ s->stream.avail_out--;
+ s->back = EOF;
+ s->out++;
+ start++;
+ if (s->last) {
+ s->z_err = Z_STREAM_END;
+ return 1;
+ }
+ }
+
+ while (s->stream.avail_out != 0) {
+
+ if (s->transparent) {
+ /* Copy first the lookahead bytes: */
+ uInt n = s->stream.avail_in;
+ if (n > s->stream.avail_out) n = s->stream.avail_out;
+ if (n > 0) {
+ zmemcpy(s->stream.next_out, s->stream.next_in, n);
+ next_out += n;
+ s->stream.next_out = next_out;
+ s->stream.next_in += n;
+ s->stream.avail_out -= n;
+ s->stream.avail_in -= n;
+ }
+ if (s->stream.avail_out > 0) {
+ s->stream.avail_out -=
+ (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
+ }
+ len -= s->stream.avail_out;
+ s->in += len;
+ s->out += len;
+ if (len == 0) s->z_eof = 1;
+ return (int)len;
+ }
+ if (s->stream.avail_in == 0 && !s->z_eof) {
+
+ errno = 0;
+ s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->in += s->stream.avail_in;
+ s->out += s->stream.avail_out;
+ s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
+ s->in -= s->stream.avail_in;
+ s->out -= s->stream.avail_out;
+
+ if (s->z_err == Z_STREAM_END) {
+ /* Check CRC and original size */
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+ start = s->stream.next_out;
+
+ if (getLong(s) != s->crc) {
+ s->z_err = Z_DATA_ERROR;
+ } else {
+ (void)getLong(s);
+ /* The uncompressed length returned by above getlong() may be
+ * different from s->out in case of concatenated .gz files.
+ * Check for such files:
+ */
+ check_header(s);
+ if (s->z_err == Z_OK) {
+ inflateReset(&(s->stream));
+ s->crc = crc32(0L, Z_NULL, 0);
+ }
+ }
+ }
+ if (s->z_err != Z_OK || s->z_eof) break;
+ }
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+
+ if (len == s->stream.avail_out &&
+ (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
+ return -1;
+ return (int)(len - s->stream.avail_out);
+}
+
+
+/* ===========================================================================
+ Reads one byte from the compressed file. gzgetc returns this byte
+ or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+ gzFile file;
+{
+ unsigned char c;
+
+ return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+ Push one byte back onto the stream.
+*/
+int ZEXPORT gzungetc(c, file)
+ int c;
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
+ s->back = c;
+ s->out--;
+ s->last = (s->z_err == Z_STREAM_END);
+ if (s->last) s->z_err = Z_OK;
+ s->z_eof = 0;
+ return c;
+}
+
+
+/* ===========================================================================
+ Reads bytes from the compressed file until len-1 characters are
+ read, or a newline character is read and transferred to buf, or an
+ end-of-file condition is encountered. The string is then terminated
+ with a null character.
+ gzgets returns buf, or Z_NULL in case of error.
+
+ The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+ gzFile file;
+ char *buf;
+ int len;
+{
+ char *b = buf;
+ if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+ while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+ *buf = '\0';
+ return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_GZCOMPRESS
+/* ===========================================================================
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of bytes actually written (0 in case of error).
+*/
+int ZEXPORT gzwrite (file, buf, len)
+ gzFile file;
+ voidpc buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.next_in = (Bytef*)buf;
+ s->stream.avail_in = len;
+
+ while (s->stream.avail_in != 0) {
+
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ s->in += s->stream.avail_in;
+ s->out += s->stream.avail_out;
+ s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
+ s->in -= s->stream.avail_in;
+ s->out -= s->stream.avail_out;
+ if (s->z_err != Z_OK) break;
+ }
+ s->crc = crc32(s->crc, (const Bytef *)buf, len);
+
+ return (int)(len - s->stream.avail_in);
+}
+
+
+/* ===========================================================================
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ va_list va;
+ int len;
+
+ buf[sizeof(buf) - 1] = 0;
+ va_start(va, format);
+#ifdef NO_vsnprintf
+# ifdef HAS_vsprintf_void
+ (void)vsprintf(buf, format, va);
+ va_end(va);
+ for (len = 0; len < sizeof(buf); len++)
+ if (buf[len] == 0) break;
+# else
+ len = vsprintf(buf, format, va);
+ va_end(va);
+# endif
+#else
+# ifdef HAS_vsnprintf_void
+ (void)vsnprintf(buf, sizeof(buf), format, va);
+ va_end(va);
+ len = strlen(buf);
+# else
+ len = vsnprintf(buf, sizeof(buf), format, va);
+ va_end(va);
+# endif
+#endif
+ if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+ return 0;
+ return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+ gzFile file;
+ const char *format;
+ int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ int len;
+
+ buf[sizeof(buf) - 1] = 0;
+#ifdef NO_snprintf
+# ifdef HAS_sprintf_void
+ sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ for (len = 0; len < sizeof(buf); len++)
+ if (buf[len] == 0) break;
+# else
+ len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#else
+# ifdef HAS_snprintf_void
+ snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+ len = strlen(buf);
+# else
+ len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+# endif
+#endif
+ if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
+ return 0;
+ return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+ Writes c, converted to an unsigned char, into the compressed file.
+ gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+ gzFile file;
+ int c;
+{
+ unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+ return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+ gzFile file;
+ const char *s;
+{
+ return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
+/* ===========================================================================
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the deflate() function.
+*/
+local int do_flush (file, flush)
+ gzFile file;
+ int flush;
+{
+ uInt len;
+ int done = 0;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.avail_in = 0; /* should be zero already anyway */
+
+ for (;;) {
+ len = Z_BUFSIZE - s->stream.avail_out;
+
+ if (len != 0) {
+ if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
+ s->z_err = Z_ERRNO;
+ return Z_ERRNO;
+ }
+ s->stream.next_out = s->outbuf;
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ if (done) break;
+ s->out += s->stream.avail_out;
+ s->z_err = deflate(&(s->stream), flush);
+ s->out -= s->stream.avail_out;
+
+ /* Ignore the second of two consecutive flushes: */
+ if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
+ /* deflate has finished flushing only when it hasn't used up
+ * all the available space in the output buffer:
+ */
+ done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
+
+ if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
+ }
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+ gzFile file;
+ int flush;
+{
+ gz_stream *s = (gz_stream*)file;
+ int err = do_flush (file, flush);
+
+ if (err) return err;
+ fflush(s->file);
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+#endif /* NO_GZCOMPRESS */
+
+/* ===========================================================================
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error.
+ SEEK_END is not implemented, returns error.
+ In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+ gzFile file;
+ z_off_t offset;
+ int whence;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || whence == SEEK_END ||
+ s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+ return -1L;
+ }
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ return -1L;
+#else
+ if (whence == SEEK_SET) {
+ offset -= s->in;
+ }
+ if (offset < 0) return -1L;
+
+ /* At this point, offset is the number of zero bytes to write. */
+ if (s->inbuf == Z_NULL) {
+ s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+ if (s->inbuf == Z_NULL) return -1L;
+ zmemzero(s->inbuf, Z_BUFSIZE);
+ }
+ while (offset > 0) {
+ uInt size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+ size = gzwrite(file, s->inbuf, size);
+ if (size == 0) return -1L;
+
+ offset -= size;
+ }
+ return s->in;
+#endif
+ }
+ /* Rest of function is for reading only */
+
+ /* compute absolute position */
+ if (whence == SEEK_CUR) {
+ offset += s->out;
+ }
+ if (offset < 0) return -1L;
+
+ if (s->transparent) {
+ /* map to fseek */
+ s->back = EOF;
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+ s->in = s->out = offset;
+ return offset;
+ }
+
+ /* For a negative seek, rewind and use positive seek */
+ if (offset >= s->out) {
+ offset -= s->out;
+ } else if (gzrewind(file) < 0) {
+ return -1L;
+ }
+ /* offset is now the number of bytes to skip. */
+
+ if (offset != 0 && s->outbuf == Z_NULL) {
+ s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+ if (s->outbuf == Z_NULL) return -1L;
+ }
+ if (offset && s->back != EOF) {
+ s->back = EOF;
+ s->out++;
+ offset--;
+ if (s->last) s->z_err = Z_STREAM_END;
+ }
+ while (offset > 0) {
+ int size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (int)offset;
+
+ size = gzread(file, s->outbuf, (uInt)size);
+ if (size <= 0) return -1L;
+ offset -= size;
+ }
+ return s->out;
+}
+
+/* ===========================================================================
+ Rewinds input file.
+*/
+int ZEXPORT gzrewind (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return -1;
+
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->back = EOF;
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ s->crc = crc32(0L, Z_NULL, 0);
+ if (!s->transparent) (void)inflateReset(&s->stream);
+ s->in = 0;
+ s->out = 0;
+ return fseek(s->file, s->start, SEEK_SET);
+}
+
+/* ===========================================================================
+ Returns the starting position for the next gzread or gzwrite on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+ gzFile file;
+{
+ return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ /* With concatenated compressed files that can have embedded
+ * crc trailers, z_eof is no longer the only/best indicator of EOF
+ * on a gz_stream. Handle end-of-stream error explicitly here.
+ */
+ if (s == NULL || s->mode != 'r') return 0;
+ if (s->z_eof) return 1;
+ return s->z_err == Z_STREAM_END;
+}
+
+/* ===========================================================================
+ Returns 1 if reading and doing so transparently, otherwise zero.
+*/
+int ZEXPORT gzdirect (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return 0;
+ return s->transparent;
+}
+
+/* ===========================================================================
+ Outputs a long in LSB order to the given file
+*/
+local void putLong (file, x)
+ FILE *file;
+ uLong x;
+{
+ int n;
+ for (n = 0; n < 4; n++) {
+ fputc((int)(x & 0xff), file);
+ x >>= 8;
+ }
+}
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets z_err in case
+ of error.
+*/
+local uLong getLong (s)
+ gz_stream *s;
+{
+ uLong x = (uLong)get_byte(s);
+ int c;
+
+ x += ((uLong)get_byte(s))<<8;
+ x += ((uLong)get_byte(s))<<16;
+ c = get_byte(s);
+ if (c == EOF) s->z_err = Z_DATA_ERROR;
+ x += ((uLong)c)<<24;
+ return x;
+}
+
+/* ===========================================================================
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression state.
+*/
+int ZEXPORT gzclose (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) return Z_STREAM_ERROR;
+
+ if (s->mode == 'w') {
+#ifdef NO_GZCOMPRESS
+ return Z_STREAM_ERROR;
+#else
+ if (do_flush (file, Z_FINISH) != Z_OK)
+ return destroy((gz_stream*)file);
+
+ putLong (s->file, s->crc);
+ putLong (s->file, (uLong)(s->in & 0xffffffff));
+#endif
+ }
+ return destroy((gz_stream*)file);
+}
+
+#ifdef STDC
+# define zstrerror(errnum) strerror(errnum)
+#else
+# define zstrerror(errnum) ""
+#endif
+
+/* ===========================================================================
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to Z_ERRNO and the application may consult errno
+ to get the exact error code.
+*/
+const char * ZEXPORT gzerror (file, errnum)
+ gzFile file;
+ int *errnum;
+{
+ char *m;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) {
+ *errnum = Z_STREAM_ERROR;
+ return (const char*)ERR_MSG(Z_STREAM_ERROR);
+ }
+ *errnum = s->z_err;
+ if (*errnum == Z_OK) return (const char*)"";
+
+ m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
+
+ if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
+
+ TRYFREE(s->msg);
+ s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
+ if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
+ strcpy(s->msg, s->path);
+ strcat(s->msg, ": ");
+ strcat(s->msg, m);
+ return (const char*)s->msg;
+}
+
+/* ===========================================================================
+ Clear the error and end-of-file flags, and do the same for the real file.
+*/
+void ZEXPORT gzclearerr (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) return;
+ if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
+ s->z_eof = 0;
+ clearerr(s->file);
+}
Added: llvm-gcc-4.2/trunk/zlib/infback.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/infback.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/infback.c (added)
+++ llvm-gcc-4.2/trunk/zlib/infback.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,623 @@
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ This code is largely copied from inflate.c. Normally either infback.o or
+ inflate.o would be linked into an application--not both. The interface
+ with inffast.c is retained so that optimized assembler-coded versions of
+ inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+ strm provides memory allocation functions in zalloc and zfree, or
+ Z_NULL to use the library memory allocation functions.
+
+ windowBits is in the range 8..15, and window is a user-supplied
+ window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
+z_streamp strm;
+int windowBits;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL || window == Z_NULL ||
+ windowBits < 8 || windowBits > 15)
+ return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+ state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+ sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ state->dmax = 32768U;
+ state->wbits = windowBits;
+ state->wsize = 1U << windowBits;
+ state->window = window;
+ state->write = 0;
+ state->whave = 0;
+ return Z_OK;
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Assure that some input is available. If input is requested, but denied,
+ then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+ do { \
+ if (have == 0) { \
+ have = in(in_desc, &next); \
+ if (have == 0) { \
+ next = Z_NULL; \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+ with an error if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ PULL(); \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflateBack() with
+ an error. */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Assure that some output space is available, by writing out the window
+ if it's full. If the write fails, return from inflateBack() with a
+ Z_BUF_ERROR. */
+#define ROOM() \
+ do { \
+ if (left == 0) { \
+ put = state->window; \
+ left = state->wsize; \
+ state->whave = left; \
+ if (out(out_desc, put, left)) { \
+ ret = Z_BUF_ERROR; \
+ goto inf_leave; \
+ } \
+ } \
+ } while (0)
+
+/*
+ strm provides the memory allocation functions and window buffer on input,
+ and provides information on the unused input on return. For Z_DATA_ERROR
+ returns, strm will also provide an error message.
+
+ in() and out() are the call-back input and output functions. When
+ inflateBack() needs more input, it calls in(). When inflateBack() has
+ filled the window with output, or when it completes with data in the
+ window, it calls out() to write out the data. The application must not
+ change the provided input until in() is called again or inflateBack()
+ returns. The application must not change the window/output buffer until
+ inflateBack() returns.
+
+ in() and out() are called with a descriptor parameter provided in the
+ inflateBack() call. This parameter can be a structure that provides the
+ information required to do the read or write, as well as accumulated
+ information on the input and output such as totals and check values.
+
+ in() should return zero on failure. out() should return non-zero on
+ failure. If either in() or out() fails, than inflateBack() returns a
+ Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it
+ was in() or out() that caused in the error. Otherwise, inflateBack()
+ returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+ error, or Z_MEM_ERROR if it could not allocate memory for the state.
+ inflateBack() can also return Z_STREAM_ERROR if the input parameters
+ are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
+z_streamp strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+ struct inflate_state FAR *state;
+ unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code this; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ /* Check that the strm exists and that the state was initialized */
+ if (strm == Z_NULL || strm->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* Reset the state */
+ strm->msg = Z_NULL;
+ state->mode = TYPE;
+ state->last = 0;
+ state->whave = 0;
+ next = strm->next_in;
+ have = next != Z_NULL ? strm->avail_in : 0;
+ hold = 0;
+ bits = 0;
+ put = state->window;
+ left = state->wsize;
+
+ /* Inflate until end of block marked as last */
+ for (;;)
+ switch (state->mode) {
+ case TYPE:
+ /* determine and dispatch block type */
+ if (state->last) {
+ BYTEBITS();
+ state->mode = DONE;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+
+ case STORED:
+ /* get and verify stored block length */
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+
+ /* copy stored block from input to output */
+ while (state->length != 0) {
+ copy = state->length;
+ PULL();
+ ROOM();
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+
+ case TABLE:
+ /* get dynamic table entries descriptor */
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+
+ /* get code length code lengths (not a typo) */
+ state->have = 0;
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+
+ /* get length and distance code code lengths */
+ state->have = 0;
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.val < 16) {
+ NEEDBITS(this.bits);
+ DROPBITS(this.bits);
+ state->lens[state->have++] = this.val;
+ }
+ else {
+ if (this.val == 16) {
+ NEEDBITS(this.bits + 2);
+ DROPBITS(this.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = (unsigned)(state->lens[state->have - 1]);
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (this.val == 17) {
+ NEEDBITS(this.bits + 3);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(this.bits + 7);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* build code tables */
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN;
+
+ case LEN:
+ /* use inflate_fast() if we have enough input and output */
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ if (state->whave < state->wsize)
+ state->whave = state->wsize - left;
+ inflate_fast(strm, state->wsize);
+ LOAD();
+ break;
+ }
+
+ /* get a literal, length, or end-of-block code */
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.op && (this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ state->length = (unsigned)this.val;
+
+ /* process literal */
+ if (this.op == 0) {
+ Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", this.val));
+ ROOM();
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ }
+
+ /* process end of block */
+ if (this.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+
+ /* invalid code */
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+
+ /* length code -- get extra bits, if any */
+ state->extra = (unsigned)(this.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+
+ /* get distance code */
+ for (;;) {
+ this = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)this.val;
+
+ /* get distance extra bits, if any */
+ state->extra = (unsigned)(this.op) & 15;
+ if (state->extra != 0) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ if (state->offset > state->wsize - (state->whave < state->wsize ?
+ left : 0)) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+
+ /* copy match from window to output */
+ do {
+ ROOM();
+ copy = state->wsize - state->offset;
+ if (copy < left) {
+ from = put + copy;
+ copy = left - copy;
+ }
+ else {
+ from = put - state->offset;
+ copy = left;
+ }
+ if (copy > state->length) copy = state->length;
+ state->length -= copy;
+ left -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ } while (state->length != 0);
+ break;
+
+ case DONE:
+ /* inflate stream terminated properly -- write leftover output */
+ ret = Z_STREAM_END;
+ if (left < state->wsize) {
+ if (out(out_desc, state->window, state->wsize - left))
+ ret = Z_BUF_ERROR;
+ }
+ goto inf_leave;
+
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+
+ default: /* can't happen, but makes compilers happy */
+ ret = Z_STREAM_ERROR;
+ goto inf_leave;
+ }
+
+ /* Return unused input */
+ inf_leave:
+ strm->next_in = next;
+ strm->avail_in = have;
+ return ret;
+}
+
+int ZEXPORT inflateBackEnd(strm)
+z_streamp strm;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
Added: llvm-gcc-4.2/trunk/zlib/inffast.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inffast.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inffast.c (added)
+++ llvm-gcc-4.2/trunk/zlib/inffast.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,318 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+ Based on testing to date,
+ Pre-increment preferred for:
+ - PowerPC G3 (Adler)
+ - MIPS R5000 (Randers-Pehrson)
+ Post-increment preferred for:
+ - none
+ No measurable difference:
+ - Pentium III (Anderson)
+ - M68060 (Nikl)
+ */
+#ifdef POSTINC
+# define OFF 0
+# define PUP(a) *(a)++
+#else
+# define OFF 1
+# define PUP(a) *++(a)
+#endif
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
+{
+ struct inflate_state FAR *state;
+ unsigned char FAR *in; /* local strm->next_in */
+ unsigned char FAR *last; /* while in < last, enough input available */
+ unsigned char FAR *out; /* local strm->next_out */
+ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
+ unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const FAR *lcode; /* local strm->lencode */
+ code const FAR *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code this; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char FAR *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state FAR *)strm->state;
+ in = strm->next_in - OFF;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out - OFF;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ write = state->write;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
+ do {
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op == 0) { /* literal */
+ Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", this.val));
+ PUP(out) = (unsigned char)(this.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ Tracevv((stderr, "inflate: length %u\n", len));
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ Tracevv((stderr, "inflate: distance %u\n", dist));
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ from = window - OFF;
+ if (write == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (write < op) { /* wrap around window */
+ from += wsize + write - op;
+ op -= write;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = window - OFF;
+ if (write < len) { /* some from start of window */
+ op = write;
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += write - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ }
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ this = dcode[this.val + (hold & ((1U << op) - 1))];
+ goto dodist;
+ }
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ this = lcode[this.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in + OFF;
+ strm->next_out = out + OFF;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
+}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and write == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
Added: llvm-gcc-4.2/trunk/zlib/inffast.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inffast.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inffast.h (added)
+++ llvm-gcc-4.2/trunk/zlib/inffast.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+void inflate_fast OF((z_streamp strm, unsigned start));
Added: llvm-gcc-4.2/trunk/zlib/inffixed.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inffixed.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inffixed.h (added)
+++ llvm-gcc-4.2/trunk/zlib/inffixed.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,94 @@
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications. It
+ is part of the implementation of the compression library and
+ is subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
Added: llvm-gcc-4.2/trunk/zlib/inflate.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inflate.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inflate.c (added)
+++ llvm-gcc-4.2/trunk/zlib/inflate.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,1368 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0 24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ * creation of window when not needed, minimize use of window when it is
+ * needed, make inffast.c even faster, implement gzip decoding, and to
+ * improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1 25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2 4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ * to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3 22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ * buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4 1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common write == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ * source file infback.c to provide a call-back interface to inflate for
+ * programs like gzip and unzip -- uses window as output buffer to avoid
+ * window copying
+ *
+ * 1.2.beta5 1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ * input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6 4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ * make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7 27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0 9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ * for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ * and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+# ifndef BUILDFIXED
+# define BUILDFIXED
+# endif
+#endif
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, unsigned out));
+#ifdef BUILDFIXED
+ void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
+ unsigned len));
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = Z_NULL;
+ strm->adler = 1; /* to support ill-conceived Java test suite */
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
+ state->wsize = 0;
+ state->whave = 0;
+ state->write = 0;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+ struct inflate_state FAR *state;
+
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != (int)(sizeof(z_stream)))
+ return Z_VERSION_ERROR;
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+ strm->msg = Z_NULL; /* in case we return an error */
+ if (strm->zalloc == (alloc_func)0) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+ state = (struct inflate_state FAR *)
+ ZALLOC(strm, 1, sizeof(struct inflate_state));
+ if (state == Z_NULL) return Z_MEM_ERROR;
+ Tracev((stderr, "inflate: allocated\n"));
+ strm->state = (struct internal_state FAR *)state;
+ if (windowBits < 0) {
+ state->wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ state->wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+ if (windowBits < 48) windowBits &= 15;
+#endif
+ }
+ if (windowBits < 8 || windowBits > 15) {
+ ZFREE(strm, state);
+ strm->state = Z_NULL;
+ return Z_STREAM_ERROR;
+ }
+ state->wbits = (unsigned)windowBits;
+ state->window = Z_NULL;
+ return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+ return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter. This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time. However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+ static int virgin = 1;
+ static code *lenfix, *distfix;
+ static code fixed[544];
+
+ /* build fixed huffman tables if first call (may not be thread safe) */
+ if (virgin) {
+ unsigned sym, bits;
+ static code *next;
+
+ /* literal/length table */
+ sym = 0;
+ while (sym < 144) state->lens[sym++] = 8;
+ while (sym < 256) state->lens[sym++] = 9;
+ while (sym < 280) state->lens[sym++] = 7;
+ while (sym < 288) state->lens[sym++] = 8;
+ next = fixed;
+ lenfix = next;
+ bits = 9;
+ inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+ /* distance table */
+ sym = 0;
+ while (sym < 32) state->lens[sym++] = 5;
+ distfix = next;
+ bits = 5;
+ inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+ /* do this just once */
+ virgin = 0;
+ }
+#else /* !BUILDFIXED */
+# include "inffixed.h"
+#endif /* BUILDFIXED */
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+ Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also
+ defines BUILDFIXED, so the tables are built on the fly. makefixed() writes
+ those tables to stdout, which would be piped to inffixed.h. A small program
+ can simply call makefixed to do this:
+
+ void makefixed(void);
+
+ int main(void)
+ {
+ makefixed();
+ return 0;
+ }
+
+ Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+ a.out > inffixed.h
+ */
+void makefixed()
+{
+ unsigned low, size;
+ struct inflate_state state;
+
+ fixedtables(&state);
+ puts(" /* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by makefixed().");
+ puts(" */");
+ puts("");
+ puts(" /* WARNING: this file should *not* be used by applications.");
+ puts(" It is part of the implementation of this library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ size = 1U << 9;
+ printf(" static const code lenfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 7) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
+ state.lencode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+ size = 1U << 5;
+ printf("\n static const code distfix[%u] = {", size);
+ low = 0;
+ for (;;) {
+ if ((low % 6) == 0) printf("\n ");
+ printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+ state.distcode[low].val);
+ if (++low == size) break;
+ putchar(',');
+ }
+ puts("\n };");
+}
+#endif /* MAKEFIXED */
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. If window does not exist yet, create it. This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, out)
+z_streamp strm;
+unsigned out;
+{
+ struct inflate_state FAR *state;
+ unsigned copy, dist;
+
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* if it hasn't been done already, allocate space for the window */
+ if (state->window == Z_NULL) {
+ state->window = (unsigned char FAR *)
+ ZALLOC(strm, 1U << state->wbits,
+ sizeof(unsigned char));
+ if (state->window == Z_NULL) return 1;
+ }
+
+ /* if window not in use yet, initialize */
+ if (state->wsize == 0) {
+ state->wsize = 1U << state->wbits;
+ state->write = 0;
+ state->whave = 0;
+ }
+
+ /* copy state->wsize or less output bytes into the circular window */
+ copy = out - strm->avail_out;
+ if (copy >= state->wsize) {
+ zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
+ state->write = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->write;
+ if (dist > copy) dist = copy;
+ zmemcpy(state->window + state->write, strm->next_out - copy, dist);
+ copy -= dist;
+ if (copy) {
+ zmemcpy(state->window, strm->next_out - copy, copy);
+ state->write = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->write += dist;
+ if (state->write == state->wsize) state->write = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
+ return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+# define UPDATE(check, buf, len) \
+ (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+# define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+# define CRC2(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ check = crc32(check, hbuf, 2); \
+ } while (0)
+
+# define CRC4(check, word) \
+ do { \
+ hbuf[0] = (unsigned char)(word); \
+ hbuf[1] = (unsigned char)((word) >> 8); \
+ hbuf[2] = (unsigned char)((word) >> 16); \
+ hbuf[3] = (unsigned char)((word) >> 24); \
+ check = crc32(check, hbuf, 4); \
+ } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Reverse the bytes in a 32-bit value */
+#define REVERSE(q) \
+ ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+ struct inflate_state FAR *state;
+ unsigned char FAR *next; /* next input */
+ unsigned char FAR *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char FAR *from; /* where to copy match bytes from */
+ code this; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+#ifdef GUNZIP
+ unsigned char hbuf[4]; /* buffer for gzip header crc calculation */
+#endif
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+#ifdef GUNZIP
+ if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */
+ state->check = crc32(0L, Z_NULL, 0);
+ CRC2(state->check, hold);
+ INITBITS();
+ state->mode = FLAGS;
+ break;
+ }
+ state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
+ if (!(state->wrap & 1) || /* check if zlib header allowed */
+#else
+ if (
+#endif
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+#ifdef GUNZIP
+ case FLAGS:
+ NEEDBITS(16);
+ state->flags = (int)(hold);
+ if ((state->flags & 0xff) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ if (state->flags & 0xe000) {
+ strm->msg = (char *)"unknown header flags set";
+ state->mode = BAD;
+ break;
+ }
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = TIME;
+ case TIME:
+ NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
+ if (state->flags & 0x0200) CRC4(state->check, hold);
+ INITBITS();
+ state->mode = OS;
+ case OS:
+ NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ state->mode = EXLEN;
+ case EXLEN:
+ if (state->flags & 0x0400) {
+ NEEDBITS(16);
+ state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
+ if (state->flags & 0x0200) CRC2(state->check, hold);
+ INITBITS();
+ }
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
+ state->mode = EXTRA;
+ case EXTRA:
+ if (state->flags & 0x0400) {
+ copy = state->length;
+ if (copy > have) copy = have;
+ if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ state->length -= copy;
+ }
+ if (state->length) goto inf_leave;
+ }
+ state->length = 0;
+ state->mode = NAME;
+ case NAME:
+ if (state->flags & 0x0800) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
+ state->mode = COMMENT;
+ case COMMENT:
+ if (state->flags & 0x1000) {
+ if (have == 0) goto inf_leave;
+ copy = 0;
+ do {
+ len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = len;
+ } while (len && copy < have);
+ if (state->flags & 0x0200)
+ state->check = crc32(state->check, next, copy);
+ have -= copy;
+ next += copy;
+ if (len) goto inf_leave;
+ }
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
+ state->mode = HCRC;
+ case HCRC:
+ if (state->flags & 0x0200) {
+ NEEDBITS(16);
+ if (hold != (state->check & 0xffff)) {
+ strm->msg = (char *)"header crc mismatch";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
+ strm->adler = state->check = crc32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ break;
+#endif
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = REVERSE(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = adler32(0L, Z_NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ Tracev((stderr, "inflate: stored block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ fixedtables(state);
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ state->last ? " (last)" : ""));
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ Tracev((stderr, "inflate: stored length %u\n",
+ state->length));
+ INITBITS();
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ zmemcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ Tracev((stderr, "inflate: stored end\n"));
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 7;
+ ret = inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: code lengths ok\n"));
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.val < 16) {
+ NEEDBITS(this.bits);
+ DROPBITS(this.bits);
+ state->lens[state->have++] = this.val;
+ }
+ else {
+ if (this.val == 16) {
+ NEEDBITS(this.bits + 2);
+ DROPBITS(this.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (this.val == 17) {
+ NEEDBITS(this.bits + 3);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(this.bits + 7);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* build code tables */
+ state->next = state->codes;
+ state->lencode = (code const FAR *)(state->next);
+ state->lenbits = 9;
+ ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const FAR *)(state->next);
+ state->distbits = 6;
+ ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ break;
+ }
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.op && (this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ state->length = (unsigned)this.val;
+ if ((int)(this.op) == 0) {
+ Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", this.val));
+ state->mode = LIT;
+ break;
+ }
+ if (this.op & 32) {
+ Tracevv((stderr, "inflate: end of block\n"));
+ state->mode = TYPE;
+ break;
+ }
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ this = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)this.val;
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ if (state->offset > state->whave + out - left) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ Tracevv((stderr, "inflate: distance %u\n", state->offset));
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->write) {
+ copy -= state->write;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->write - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if (out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((
+#ifdef GUNZIP
+ state->flags ? hold :
+#endif
+ REVERSE(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: check matches trailer\n"));
+ }
+#ifdef GUNZIP
+ state->mode = LENGTH;
+ case LENGTH:
+ if (state->wrap && state->flags) {
+ NEEDBITS(32);
+ if (hold != (state->total & 0xffffffffUL)) {
+ strm->msg = (char *)"incorrect length check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ Tracev((stderr, "inflate: length matches trailer\n"));
+ }
+#endif
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call updatewindow() to create and/or update the window state.
+ Note: a memory error from inflate() is non-recoverable.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+ if (updatewindow(strm, out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if (state->wrap && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+ strm->data_type = state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+ return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+ if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->window != Z_NULL) ZFREE(strm, state->window);
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+ struct inflate_state FAR *state;
+ unsigned long id;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary id */
+ if (state->mode == DICT) {
+ id = adler32(0L, Z_NULL, 0);
+ id = adler32(id, dictionary, dictLength);
+ if (id != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window */
+ if (updatewindow(strm, strm->avail_out)) {
+ state->mode = MEM;
+ return Z_MEM_ERROR;
+ }
+ if (dictLength > state->wsize) {
+ zmemcpy(state->window, dictionary + dictLength - state->wsize,
+ state->wsize);
+ state->whave = state->wsize;
+ }
+ else {
+ zmemcpy(state->window + state->wsize - dictLength, dictionary,
+ dictLength);
+ state->whave = dictLength;
+ }
+ state->havedict = 1;
+ Tracev((stderr, "inflate: dictionary set\n"));
+ return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+unsigned char FAR *buf;
+unsigned len;
+{
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state FAR *state;
+
+ /* check parameters */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+ struct inflate_state FAR *state;
+ struct inflate_state FAR *copy;
+ unsigned char FAR *window;
+ unsigned wsize;
+
+ /* check input */
+ if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
+ source->zalloc == (alloc_func)0 || source->zfree == (free_func)0)
+ return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)source->state;
+
+ /* allocate space */
+ copy = (struct inflate_state FAR *)
+ ZALLOC(source, 1, sizeof(struct inflate_state));
+ if (copy == Z_NULL) return Z_MEM_ERROR;
+ window = Z_NULL;
+ if (state->window != Z_NULL) {
+ window = (unsigned char FAR *)
+ ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+ if (window == Z_NULL) {
+ ZFREE(source, copy);
+ return Z_MEM_ERROR;
+ }
+ }
+
+ /* copy state */
+ zmemcpy(dest, source, sizeof(z_stream));
+ zmemcpy(copy, state, sizeof(struct inflate_state));
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
+ copy->next = copy->codes + (state->next - state->codes);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
+ copy->window = window;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
Added: llvm-gcc-4.2/trunk/zlib/inflate.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inflate.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inflate.h (added)
+++ llvm-gcc-4.2/trunk/zlib/inflate.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,115 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+ trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
+ the crc code when it is not needed. For shared libraries, gzip decoding
+ should be left enabled. */
+#ifndef NO_GZIP
+# define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN, /* i: waiting for length/lit code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to the BAD or MEM mode -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
+ NAME -> COMMENT -> HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ Read deflate blocks:
+ TYPE -> STORED or TABLE or LEN or CHECK
+ STORED -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN
+ Read deflate codes:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls. Approximately 7K bytes. */
+struct inflate_state {
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char FAR *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const FAR *lencode; /* starting table for length/literal codes */
+ code const FAR *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code FAR *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+};
Added: llvm-gcc-4.2/trunk/zlib/inftrees.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inftrees.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inftrees.c (added)
+++ llvm-gcc-4.2/trunk/zlib/inftrees.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,329 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+ " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/*
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
+ */
+int inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code this; /* table entry for duplication */
+ code FAR *next; /* next available space in table */
+ const unsigned short FAR *base; /* base value table to use */
+ const unsigned short FAR *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)1;
+ this.val = (unsigned short)0;
+ *(*table)++ = this; /* make a table to force an error */
+ *(*table)++ = this;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min <= MAXBITS; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked when a LENS table is being made
+ against the space in *table, ENOUGH, minus the maximum space needed by
+ the worst case distance code, MAXD. This should never happen, but the
+ sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+ This assumes that when type == LENS, bits == 9.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
+
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ this.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ this.op = (unsigned char)0;
+ this.val = work[sym];
+ }
+ else if ((int)(work[sym]) > end) {
+ this.op = (unsigned char)(extra[work[sym]]);
+ this.val = base[work[sym]];
+ }
+ else {
+ this.op = (unsigned char)(32 + 64); /* end of block */
+ this.val = 0;
+ }
+
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = this;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
+
+ /* check for enough space */
+ used += 1U << curr;
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
+
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
+ }
+
+ /*
+ Fill in rest of table for incomplete codes. This loop is similar to the
+ loop above in incrementing huff for table indices. It is assumed that
+ len is equal to curr + drop, so there is no loop needed to increment
+ through high index bits. When the current sub-table is filled, the loop
+ drops back to the root table to fill in any remaining entries there.
+ */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)(len - drop);
+ this.val = (unsigned short)0;
+ while (huff != 0) {
+ /* when done with sub-table, drop back to root table */
+ if (drop != 0 && (huff & mask) != low) {
+ drop = 0;
+ len = root;
+ next = *table;
+ this.bits = (unsigned char)len;
+ }
+
+ /* put invalid code marker in table */
+ next[huff >> drop] = this;
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/inftrees.h
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/inftrees.h?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/inftrees.h (added)
+++ llvm-gcc-4.2/trunk/zlib/inftrees.h Thu Nov 8 16:56:19 2007
@@ -0,0 +1,55 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
+
+/* Maximum size of dynamic tree. The maximum found in a long but non-
+ exhaustive search was 1444 code structures (852 for length/literals
+ and 592 for distances, the latter actually the result of an
+ exhaustive search). The true maximum is not known, but the value
+ below is more than safe. */
+#define ENOUGH 2048
+#define MAXD 592
+
+/* Type of code to build for inftable() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+ unsigned codes, code FAR * FAR *table,
+ unsigned FAR *bits, unsigned short FAR *work));
Added: llvm-gcc-4.2/trunk/zlib/make_vms.com
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/make_vms.com?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/make_vms.com (added)
+++ llvm-gcc-4.2/trunk/zlib/make_vms.com Thu Nov 8 16:56:19 2007
@@ -0,0 +1,461 @@
+$! make libz under VMS written by
+$! Martin P.J. Zinser
+$! <zinser at zinser.no-ip.info or zinser at sysdev.deutsche-boerse.com>
+$!
+$ on error then goto err_exit
+$!
+$!
+$! Just some general constants...
+$!
+$ true = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ SAY = "WRITE SYS$OUTPUT"
+$!
+$! Setup variables holding "config" information
+$!
+$ Make = ""
+$ name = "Zlib"
+$ version = "?.?.?"
+$ v_string = "ZLIB_VERSION"
+$ v_file = "zlib.h"
+$ ccopt = ""
+$ lopts = ""
+$ linkonly = false
+$ optfile = name + ".opt"
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ axp = f$getsyi("HW_MODEL").ge.1024
+$ s_case = false
+$! Check for MMK/MMS
+$!
+$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$!
+$!
+$ gosub find_version
+$!
+$ gosub check_opts
+$!
+$! Look for the compiler used
+$!
+$ gosub check_compiler
+$ if its_decc
+$ then
+$ ccopt = "/prefix=all" + ccopt
+$ if f$trnlnm("SYS") .eqs. ""
+$ then
+$ if axp
+$ then
+$ define sys sys$library:
+$ else
+$ ccopt = "/decc" + ccopt
+$ define sys decc$library_include:
+$ endif
+$ endif
+$ endif
+$ if its_vaxc .or. its_gnuc
+$ then
+$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ endif
+$!
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if make.eqs.""
+$ then
+$ dele example.obj;*,minigzip.obj;*
+$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+ adler32.c zlib.h zconf.h
+$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+ compress.c zlib.h zconf.h
+$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+ crc32.c zlib.h zconf.h
+$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+ deflate.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
+ gzio.c zutil.h zlib.h zconf.h
+$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
+ infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+ inffast.c zutil.h zlib.h zconf.h inffast.h
+$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+ inflate.c zutil.h zlib.h zconf.h infblock.h
+$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+ inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+ trees.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+ uncompr.c zlib.h zconf.h
+$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+ zutil.c zutil.h zlib.h zconf.h
+$ write sys$output "Building Zlib ..."
+$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$ write sys$output "Building example..."
+$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
+ example.c zlib.h zconf.h
+$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$ if f$search("x11vms:xvmsutils.olb") .nes. ""
+$ then
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+ minigzip.c zlib.h zconf.h
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
+ minigzip.obj libz.olb
+$ endif
+$ else
+$ gosub crea_mms
+$ SAY "Make ''name' ''version' with ''Make' "
+$ 'make'
+$ endif
+$!
+$! Alpha gets a shareable image
+$!
+$ If axp
+$ Then
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call anal_obj_axp modules.opt _link.opt
+$ if s_case
+$ then
+$ open/append optf modules.opt
+$ write optf "case_sensitive=YES"
+$ close optf
+$ endif
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
+$ endif
+$ write sys$output "Zlib build completed"
+$ exit
+$CC_ERR:
+$ write sys$output "C compiler required to build ''name'"
+$ goto err_exit
+$ERR_EXIT:
+$ set message/facil/ident/sever/text
+$ write sys$output "Exiting..."
+$ exit 2
+$!
+$!
+$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8 What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$ Argument = P'arg
+$ If Argument .Eqs. "" Then Goto Exit
+$ El=0
+$Loop2:
+$ File = F$Element(El," ",Argument)
+$ If File .Eqs. " " Then Goto Endl
+$ AFile = ""
+$Loop3:
+$ OFile = AFile
+$ AFile = F$Search(File)
+$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$ Goto Loop3
+$NextEL:
+$ El = El + 1
+$ Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Check command line options and set symbols accordingly
+$!
+$ CHECK_OPTS:
+$ i = 1
+$ OPT_LOOP:
+$ if i .lt. 9
+$ then
+$ cparm = f$edit(p'i',"upcase")
+$ if cparm .eqs. "DEBUG"
+$ then
+$ ccopt = ccopt + "/noopt/deb"
+$ lopts = lopts + "/deb"
+$ endif
+$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ ccopt = ccopt + f$extract(start,len,cparm)
+$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+ then s_case = true
+$ endif
+$ if cparm .eqs. "LINK" then linkonly = true
+$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ lopts = lopts + f$extract(start,len,cparm)
+$ endif
+$ if f$locate("CC=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ cc_com = f$extract(start,len,cparm)
+ if (cc_com .nes. "DECC") .and. -
+ (cc_com .nes. "VAXC") .and. -
+ (cc_com .nes. "GNUC")
+$ then
+$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$ write sys$output "Use DECC, VAXC, or GNUC instead"
+$ else
+$ if cc_com .eqs. "DECC" then its_decc = true
+$ if cc_com .eqs. "VAXC" then its_vaxc = true
+$ if cc_com .eqs. "GNUC" then its_gnuc = true
+$ endif
+$ endif
+$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ mmks = f$extract(start,len,cparm)
+$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$ then
+$ make = mmks
+$ else
+$ write sys$output "Unsupported make choice ''mmks' ignored"
+$ write sys$output "Use MMK or MMS instead"
+$ endif
+$ endif
+$ i = i + 1
+$ goto opt_loop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Look for the compiler used
+$!
+$CHECK_COMPILER:
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then
+$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
+$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
+$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
+$ endif
+$!
+$! Exit if no compiler available
+$!
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then goto CC_ERR
+$ else
+$ if its_decc then write sys$output "CC compiler check ... Compaq C"
+$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! If MMS/MMK are available dump out the descrip.mms if required
+$!
+$CREA_MMS:
+$ write sys$output "Creating descrip.mms..."
+$ create descrip.mms
+$ open/append out descrip.mms
+$ copy sys$input: out
+$ deck
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser
+# <zinser at zinser.no-ip.info or zinser at sysdev.deutsche-boerse.com>
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, \
+ inftrees.obj, inffast.obj
+
+$ eod
+$ write out "CFLAGS=", ccopt
+$ write out "LOPTS=", lopts
+$ copy sys$input: out
+$ deck
+
+all : example.exe minigzip.exe libz.olb
+ @ write sys$output " Example applications available"
+
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link $(LOPTS) example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
+
+
+# Other dependencies.
+adler32.obj : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj : crc32.c zutil.h zlib.h zconf.h
+deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj : example.c zlib.h zconf.h
+gzio.obj : gzio.c zutil.h zlib.h zconf.h
+inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : minigzip.c zlib.h zconf.h
+trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : uncompr.c zlib.h zconf.h
+zutil.obj : zutil.c zutil.h zlib.h zconf.h
+infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ eod
+$ close out
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Read list of core library sources from makefile.in and create options
+$! needed to build shareable image
+$!
+$CREA_OLIST:
+$ open/read min makefile.in
+$ open/write mod modules.opt
+$ src_check = "OBJS ="
+$MRLOOP:
+$ read/end=mrdone min rec
+$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ rec = rec - src_check
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$MRSLOOP:
+$ read/end=mrdone min rec
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
+$MRDONE:
+$ close min
+$ close mod
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Take record extracted in crea_olist and split it into single filenames
+$!
+$EXTRA_FILNAM:
+$ myrec = f$edit(rec - "\", "trim,compress")
+$ i = 0
+$FELOOP:
+$ srcfil = f$element(i," ", myrec)
+$ if (srcfil .nes. " ")
+$ then
+$ write mod f$parse(srcfil,,,"NAME"), ".obj"
+$ i = i + 1
+$ goto feloop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Find current Zlib version number
+$!
+$FIND_VERSION:
+$ open/read h_in 'v_file'
+$hloop:
+$ read/end=hdone h_in rec
+$ rec = f$edit(rec,"TRIM")
+$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
+$ rec = f$edit(rec - "#", "TRIM")
+$ if f$element(0," ",rec) .nes. "define" then goto hloop
+$ if f$element(1," ",rec) .eqs. v_string
+$ then
+$ version = 'f$element(2," ",rec)'
+$ goto hdone
+$ endif
+$ goto hloop
+$hdone:
+$ close h_in
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
+$! information to build a symbol vector for a shareable image
+$! All the "brains" of this logic was suggested by Hartmut Becker
+$! (Hartmut.Becker at compaq.com). All the bugs were introduced by me
+$! (zinser at decus.de), so if you do have problem reports please do not
+$! bother Hartmut/HP, but get in touch with me
+$!
+$ ANAL_OBJ_AXP: Subroutine
+$ V = 'F$Verify(0)
+$ SAY := "WRITE_ SYS$OUTPUT"
+$
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
+$ goto exit_aa
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
+$ goto exit_aa
+$ ENDIF
+$
+$ open/read in 'p1
+$ create a.tmp
+$ open/append atmp a.tmp
+$ loop:
+$ read/end=end_loop in line
+$ f= f$search(line)
+$ if f .eqs. ""
+$ then
+$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
+$ goto loop
+$ endif
+$ define/user sys$output nl:
+$ define/user sys$error nl:
+$ anal/obj/gsd 'f /out=x.tmp
+$ open/read xtmp x.tmp
+$ XLOOP:
+$ read/end=end_xloop xtmp xline
+$ xline = f$edit(xline,"compress")
+$ write atmp xline
+$ goto xloop
+$ END_XLOOP:
+$ close xtmp
+$ goto loop
+$ end_loop:
+$ close in
+$ close atmp
+$ if f$search("a.tmp") .eqs. "" -
+ then $ exit
+$ ! all global definitions
+$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
+$ ! all procedures
+$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
+$ search c.tmp "symbol:"/out=d.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input d.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=PROCEDURE)/whole
+exit
+$ ! all data
+$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
+$ search e.tmp "symbol:"/out=f.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input f.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=DATA)/whole
+exit
+$ sort/nodupl d.tmp,f.tmp 'p2'
+$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
+$ if f$search("x.tmp") .nes. "" -
+ then $ delete x.tmp;*
+$!
+$ EXIT_AA:
+$ if V then set verify
+$ endsubroutine
+$!------------------------------------------------------------------------------
Added: llvm-gcc-4.2/trunk/zlib/minigzip.c
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/minigzip.c?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/minigzip.c (added)
+++ llvm-gcc-4.2/trunk/zlib/minigzip.c Thu Nov 8 16:56:19 2007
@@ -0,0 +1,322 @@
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id: minigzip.c,v 1.1.1.2 2002/03/11 21:53:26 tromey Exp $ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef USE_MMAP
+# include <sys/types.h>
+# include <sys/mman.h>
+# include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#ifdef VMS
+# define unlink delete
+# define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+# define unlink remove
+# define GZ_SUFFIX "-gz"
+# define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+ extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
+# define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN 16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+# define local static
+ /* Needed for systems with limitation on stack size. */
+#else
+# define local
+#endif
+
+char *prog;
+
+void error OF((const char *msg));
+void gz_compress OF((FILE *in, gzFile out));
+#ifdef USE_MMAP
+int gz_compress_mmap OF((FILE *in, gzFile out));
+#endif
+void gz_uncompress OF((gzFile in, FILE *out));
+void file_compress OF((char *file, char *mode));
+void file_uncompress OF((char *file));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+ const char *msg;
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+ FILE *in;
+ gzFile out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+#ifdef USE_MMAP
+ /* Try first compressing with mmap. If mmap fails (minigzip used in a
+ * pipe), use the normal fread loop.
+ */
+ if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+ for (;;) {
+ len = (int)fread(buf, 1, sizeof(buf), in);
+ if (ferror(in)) {
+ perror("fread");
+ exit(1);
+ }
+ if (len == 0) break;
+
+ if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+ }
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech at eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+ FILE *in;
+ gzFile out;
+{
+ int len;
+ int err;
+ int ifd = fileno(in);
+ caddr_t buf; /* mmap'ed buffer for the entire input file */
+ off_t buf_len; /* length of the input file */
+ struct stat sb;
+
+ /* Determine the size of the file, needed for mmap: */
+ if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+ buf_len = sb.st_size;
+ if (buf_len <= 0) return Z_ERRNO;
+
+ /* Now do the actual mmap: */
+ buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+ if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+ /* Compress the whole file at once: */
+ len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+ if (len != (int)buf_len) error(gzerror(out, &err));
+
+ munmap(buf, buf_len);
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+ return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+ gzFile in;
+ FILE *out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+ for (;;) {
+ len = gzread(in, buf, sizeof(buf));
+ if (len < 0) error (gzerror(in, &err));
+ if (len == 0) break;
+
+ if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+ error("failed fwrite");
+ }
+ }
+ if (fclose(out)) error("failed fclose");
+
+ if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+ char *file;
+ char *mode;
+{
+ local char outfile[MAX_NAME_LEN];
+ FILE *in;
+ gzFile out;
+
+ strcpy(outfile, file);
+ strcat(outfile, GZ_SUFFIX);
+
+ in = fopen(file, "rb");
+ if (in == NULL) {
+ perror(file);
+ exit(1);
+ }
+ out = gzopen(outfile, mode);
+ if (out == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+ exit(1);
+ }
+ gz_compress(in, out);
+
+ unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+ char *file;
+{
+ local char buf[MAX_NAME_LEN];
+ char *infile, *outfile;
+ FILE *out;
+ gzFile in;
+ uInt len = (uInt)strlen(file);
+
+ strcpy(buf, file);
+
+ if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+ infile = file;
+ outfile = buf;
+ outfile[len-3] = '\0';
+ } else {
+ outfile = file;
+ infile = buf;
+ strcat(infile, GZ_SUFFIX);
+ }
+ in = gzopen(infile, "rb");
+ if (in == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+ exit(1);
+ }
+ out = fopen(outfile, "wb");
+ if (out == NULL) {
+ perror(file);
+ exit(1);
+ }
+
+ gz_uncompress(in, out);
+
+ unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage: minigzip [-d] [-f] [-h] [-r] [-1 to -9] [files...]
+ * -d : decompress
+ * -f : compress with Z_FILTERED
+ * -h : compress with Z_HUFFMAN_ONLY
+ * -r : compress with Z_RLE
+ * -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ int uncompr = 0;
+ gzFile file;
+ char outmode[20];
+
+ strcpy(outmode, "wb6 ");
+
+ prog = argv[0];
+ argc--, argv++;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "-d") == 0)
+ uncompr = 1;
+ else if (strcmp(*argv, "-f") == 0)
+ outmode[3] = 'f';
+ else if (strcmp(*argv, "-h") == 0)
+ outmode[3] = 'h';
+ else if (strcmp(*argv, "-r") == 0)
+ outmode[3] = 'R';
+ else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+ (*argv)[2] == 0)
+ outmode[2] = (*argv)[1];
+ else
+ break;
+ argc--, argv++;
+ }
+ if (outmode[3] == ' ')
+ outmode[3] = 0;
+ if (argc == 0) {
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+ if (uncompr) {
+ file = gzdopen(fileno(stdin), "rb");
+ if (file == NULL) error("can't gzdopen stdin");
+ gz_uncompress(file, stdout);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+ gz_compress(stdin, file);
+ }
+ } else {
+ do {
+ if (uncompr) {
+ file_uncompress(*argv);
+ } else {
+ file_compress(*argv, outmode);
+ }
+ } while (argv++, --argc);
+ }
+ return 0;
+}
Added: llvm-gcc-4.2/trunk/zlib/msdos/Makefile.bor
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/msdos/Makefile.bor?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/msdos/Makefile.bor (added)
+++ llvm-gcc-4.2/trunk/zlib/msdos/Makefile.bor Thu Nov 8 16:56:19 2007
@@ -0,0 +1,109 @@
+# Makefile for zlib
+# Borland C++
+# Last updated: 15-Mar-2003
+
+# To use, do "make -fmakefile.bor"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+# -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------ Turbo C++, Borland C++ ------------
+
+# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+# to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# memory model: one of s, m, c, l (small, medium, compact, large)
+MODEL=l
+
+# replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
+CC=bcc
+LD=bcc
+AR=tlib
+
+# compiler flags
+# replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
+CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
+
+LDFLAGS=-m$(MODEL) -f-
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del zlib_*.bak
+ -del foo.gz
Added: llvm-gcc-4.2/trunk/zlib/msdos/Makefile.dj2
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/msdos/Makefile.dj2?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/msdos/Makefile.dj2 (added)
+++ llvm-gcc-4.2/trunk/zlib/msdos/Makefile.dj2 Thu Nov 8 16:56:19 2007
@@ -0,0 +1,104 @@
+# Makefile for zlib. Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type:
+#
+# make -fmakefile.dj2; make test -fmakefile.dj2
+#
+# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
+#
+# make install -fmakefile.dj2
+#
+# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
+# in the sample below if the pattern of the DJGPP distribution is to
+# be followed. Remember that, while <sp>'es around <=> are ignored in
+# makefiles, they are *not* in batch files or in djgpp.env.
+# - - - - -
+# [make]
+# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
+# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
+# BUTT=-m486
+# - - - - -
+# Alternately, these variables may be defined below, overriding the values
+# in djgpp.env, as
+# INCLUDE_PATH=c:\usr\include
+# LIBRARY_PATH=c:\usr\lib
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+ -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+check: test
+test: all
+ ./example
+ echo hello world | .\minigzip | .\minigzip -d
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+
+%.exe : %.o $(LIBS)
+ $(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+ - at if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+ - at if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+ $(INSTALL) zlib.h $(INCLUDE_PATH)
+ $(INSTALL) zconf.h $(INCLUDE_PATH)
+ $(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+ $(RM) $(INCLUDE_PATH)\zlib.h
+ $(RM) $(INCLUDE_PATH)\zconf.h
+ $(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+ $(RM) *.d
+ $(RM) *.o
+ $(RM) *.exe
+ $(RM) libz.a
+ $(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
Added: llvm-gcc-4.2/trunk/zlib/msdos/Makefile.emx
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/msdos/Makefile.emx?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/msdos/Makefile.emx (added)
+++ llvm-gcc-4.2/trunk/zlib/msdos/Makefile.emx Thu Nov 8 16:56:19 2007
@@ -0,0 +1,69 @@
+# Makefile for zlib. Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile, or to compile and test, type:
+#
+# make -fmakefile.emx; make test -fmakefile.emx
+#
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+ -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f." If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+ ./example
+ echo hello world | .\minigzip | .\minigzip -d
+
+%.o : %.c
+ $(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+ $(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+ $(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+ $(RM) *.d
+ $(RM) *.o
+ $(RM) *.exe
+ $(RM) zlib.a
+ $(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
Added: llvm-gcc-4.2/trunk/zlib/msdos/Makefile.msc
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/msdos/Makefile.msc?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/msdos/Makefile.msc (added)
+++ llvm-gcc-4.2/trunk/zlib/msdos/Makefile.msc Thu Nov 8 16:56:19 2007
@@ -0,0 +1,106 @@
+# Makefile for zlib
+# Microsoft C 5.1 or later
+# Last updated: 19-Mar-2003
+
+# To use, do "make makefile.msc"
+# To compile in small model, set below: MODEL=S
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft C 5.1 and later -------------
+
+# Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+# should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+# to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of S, M, C, L (small, medium, compact, large)
+MODEL=L
+
+CC=cl
+CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
+#-Ox generates bad code with MSC 5.1
+LIB_CFLAGS=-Zl $(CFLAGS)
+
+LD=link
+LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
+# "/farcall/packcode" are only useful for `large code' memory models
+# but should be a "no-op" for small code models.
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(LIB_CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+ $(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+ $(CC) -c $(CFLAGS) $*.c
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ if exist $(ZLIB_LIB) del $(ZLIB_LIB)
+ lib $(ZLIB_LIB) $(OBJ1);
+ lib $(ZLIB_LIB) $(OBJ2);
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del *.map
+ -del zlib_*.bak
+ -del foo.gz
Added: llvm-gcc-4.2/trunk/zlib/msdos/Makefile.tc
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/msdos/Makefile.tc?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/msdos/Makefile.tc (added)
+++ llvm-gcc-4.2/trunk/zlib/msdos/Makefile.tc Thu Nov 8 16:56:19 2007
@@ -0,0 +1,94 @@
+# Makefile for zlib
+# Turbo C 2.01, Turbo C++ 1.01
+# Last updated: 15-Mar-2003
+
+# To use, do "make -fmakefile.tc"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+# -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to CFLAGS below:
+# -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------ Turbo C 2.01, Turbo C++ 1.01 ------------
+MODEL=l
+CC=tcc
+LD=tcc
+AR=tlib
+# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+CFLAGS=-O2 -G -Z -m$(MODEL)
+LDFLAGS=-m$(MODEL) -f-
+
+
+# variables
+ZLIB_LIB = zlib_$(MODEL).lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+ $(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+
+
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+ -del $(ZLIB_LIB)
+ $(AR) $(ZLIB_LIB) $(OBJP1)
+ $(AR) $(ZLIB_LIB) $(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+ $(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+ example
+ echo hello world | minigzip | minigzip -d
+
+clean:
+ -del *.obj
+ -del *.lib
+ -del *.exe
+ -del zlib_*.bak
+ -del foo.gz
Added: llvm-gcc-4.2/trunk/zlib/old/Makefile.riscos
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/Makefile.riscos?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/Makefile.riscos (added)
+++ llvm-gcc-4.2/trunk/zlib/old/Makefile.riscos Thu Nov 8 16:56:19 2007
@@ -0,0 +1,151 @@
+# Project: zlib_1_03
+# Patched for zlib 1.1.2 rw at shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags =
+LibFileflags = -c -l -o $@
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+ at .lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+ @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+ @.o.uncompr @.o.zutil
+ LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+ @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+ @.o.trees @.o.uncompr @.o.zutil
+test: @.minigzip @.example @.lib
+ @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV
+ @echo running tests: hang on.
+ @/@.minigzip -f -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -f -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -1 libc
+ @/@.minigzip -d libc-gz
+ @diff @.lib @.libc
+ @echo that should have reported '@.lib and @.libc identical' if you have diff.
+ @/@.example @.fred @.fred
+ @echo that will have given lots of hello!'s.
+
+ at .minigzip: @.o.minigzip @.lib C:o.Stubs
+ Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
+ at .example: @.o.example @.lib C:o.Stubs
+ Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+ cdir $(libdest)
+ cdir $(libdest).h
+ @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+ @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+ @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV
+ @echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+ remove @.example
+ remove @.libc
+ -wipe @.o.* F~r~cV
+ remove @.fred
+
+# User-editable dependencies:
+.c.o:
+ cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example: c.example
+o.example: h.zlib
+o.example: h.zconf
+o.minigzip: c.minigzip
+o.minigzip: h.zlib
+o.minigzip: h.zconf
+o.adler32: c.adler32
+o.adler32: h.zlib
+o.adler32: h.zconf
+o.compress: c.compress
+o.compress: h.zlib
+o.compress: h.zconf
+o.crc32: c.crc32
+o.crc32: h.zlib
+o.crc32: h.zconf
+o.deflate: c.deflate
+o.deflate: h.deflate
+o.deflate: h.zutil
+o.deflate: h.zlib
+o.deflate: h.zconf
+o.gzio: c.gzio
+o.gzio: h.zutil
+o.gzio: h.zlib
+o.gzio: h.zconf
+o.infblock: c.infblock
+o.infblock: h.zutil
+o.infblock: h.zlib
+o.infblock: h.zconf
+o.infblock: h.infblock
+o.infblock: h.inftrees
+o.infblock: h.infcodes
+o.infblock: h.infutil
+o.infcodes: c.infcodes
+o.infcodes: h.zutil
+o.infcodes: h.zlib
+o.infcodes: h.zconf
+o.infcodes: h.inftrees
+o.infcodes: h.infblock
+o.infcodes: h.infcodes
+o.infcodes: h.infutil
+o.infcodes: h.inffast
+o.inffast: c.inffast
+o.inffast: h.zutil
+o.inffast: h.zlib
+o.inffast: h.zconf
+o.inffast: h.inftrees
+o.inffast: h.infblock
+o.inffast: h.infcodes
+o.inffast: h.infutil
+o.inffast: h.inffast
+o.inflate: c.inflate
+o.inflate: h.zutil
+o.inflate: h.zlib
+o.inflate: h.zconf
+o.inflate: h.infblock
+o.inftrees: c.inftrees
+o.inftrees: h.zutil
+o.inftrees: h.zlib
+o.inftrees: h.zconf
+o.inftrees: h.inftrees
+o.inftrees: h.inffixed
+o.infutil: c.infutil
+o.infutil: h.zutil
+o.infutil: h.zlib
+o.infutil: h.zconf
+o.infutil: h.infblock
+o.infutil: h.inftrees
+o.infutil: h.infcodes
+o.infutil: h.infutil
+o.trees: c.trees
+o.trees: h.deflate
+o.trees: h.zutil
+o.trees: h.zlib
+o.trees: h.zconf
+o.trees: h.trees
+o.uncompr: c.uncompr
+o.uncompr: h.zlib
+o.uncompr: h.zconf
+o.zutil: c.zutil
+o.zutil: h.zutil
+o.zutil: h.zlib
+o.zutil: h.zconf
Added: llvm-gcc-4.2/trunk/zlib/old/README
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/README?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/README (added)
+++ llvm-gcc-4.2/trunk/zlib/old/README Thu Nov 8 16:56:19 2007
@@ -0,0 +1,3 @@
+This directory contains files that have not been updated for zlib 1.2.x
+
+(Volunteers are encouraged to help clean this up. Thanks.)
Added: llvm-gcc-4.2/trunk/zlib/old/descrip.mms
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/descrip.mms?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/descrip.mms (added)
+++ llvm-gcc-4.2/trunk/zlib/old/descrip.mms Thu Nov 8 16:56:19 2007
@@ -0,0 +1,48 @@
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser <m.zinser at gsi.de>
+
+cc_defs =
+c_deb =
+
+.ifdef __DECC__
+pref = /prefix=all
+.endif
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
+ inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
+
+CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
+
+all : example.exe minigzip.exe
+ @ write sys$output " Example applications available"
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*
+
+
+# Other dependencies.
+adler32.obj : zutil.h zlib.h zconf.h
+compress.obj : zlib.h zconf.h
+crc32.obj : zutil.h zlib.h zconf.h
+deflate.obj : deflate.h zutil.h zlib.h zconf.h
+example.obj : zlib.h zconf.h
+gzio.obj : zutil.h zlib.h zconf.h
+infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.obj : zutil.h zlib.h zconf.h infblock.h
+inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
+infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.obj : zlib.h zconf.h
+trees.obj : deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : zlib.h zconf.h
+zutil.obj : zutil.h zlib.h zconf.h
Added: llvm-gcc-4.2/trunk/zlib/old/os2/Makefile.os2
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/os2/Makefile.os2?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/os2/Makefile.os2 (added)
+++ llvm-gcc-4.2/trunk/zlib/old/os2/Makefile.os2 Thu Nov 8 16:56:19 2007
@@ -0,0 +1,136 @@
+# Makefile for zlib under OS/2 using GCC (PGCC)
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# cp Makefile.os2 ..
+# cd ..
+# make -f Makefile.os2 test
+
+# This makefile will build a static library z.lib, a shared library
+# z.dll and a import library zdll.lib. You can use either z.lib or
+# zdll.lib by specifying either -lz or -lzdll on gcc's command line
+
+CC=gcc -Zomf -s
+
+CFLAGS=-O6 -Wall
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+#################### BUG WARNING: #####################
+## infcodes.c hits a bug in pgcc-1.0, so you have to use either
+## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
+## This bug is reportedly fixed in pgcc >1.0, but this was not tested
+CFLAGS+=-fno-force-mem
+
+LDFLAGS=-s -L. -lzdll -Zcrtdll
+LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
+
+VER=1.1.0
+ZLIB=z.lib
+SHAREDLIB=z.dll
+SHAREDLIBIMP=zdll.lib
+LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
+
+AR=emxomfar cr
+IMPLIB=emximp
+RANLIB=echo
+TAR=tar
+SHELL=bash
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+ algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+ nt/Makefile.nt nt/zlib.dnt contrib/README.contrib contrib/*.txt \
+ contrib/asm386/*.asm contrib/asm386/*.c \
+ contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+ contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \
+ contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+
+all: example.exe minigzip.exe
+
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+$(ZLIB): $(OBJS)
+ $(AR) $@ $(OBJS)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+$(SHAREDLIB): $(OBJS) os2/z.def
+ $(LDSHARED) -o $@ $^
+
+$(SHAREDLIBIMP): os2/z.def
+ $(IMPLIB) -o $@ $^
+
+example.exe: example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip.exe: minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+clean:
+ rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+
+distclean: clean
+
+zip:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c
+ v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ zip -ul9 zlib$$v $(DISTFILES)
+ mv Makefile~ Makefile
+
+dist:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c
+ d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ rm -f $$d.tar.gz; \
+ if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+ files=""; \
+ for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+ cd ..; \
+ GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+ if test ! -d $$d; then rm -f $$d; fi
+ mv Makefile~ Makefile
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
Added: llvm-gcc-4.2/trunk/zlib/old/os2/zlib.def
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/os2/zlib.def?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/os2/zlib.def (added)
+++ llvm-gcc-4.2/trunk/zlib/old/os2/zlib.def Thu Nov 8 16:56:19 2007
@@ -0,0 +1,51 @@
+;
+; Slightly modified version of ../nt/zlib.dnt :-)
+;
+
+LIBRARY Z
+DESCRIPTION "Zlib compression library for OS/2"
+CODE PRELOAD MOVEABLE DISCARDABLE
+DATA PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+ adler32
+ compress
+ crc32
+ deflate
+ deflateCopy
+ deflateEnd
+ deflateInit2_
+ deflateInit_
+ deflateParams
+ deflateReset
+ deflateSetDictionary
+ gzclose
+ gzdopen
+ gzerror
+ gzflush
+ gzopen
+ gzread
+ gzwrite
+ inflate
+ inflateEnd
+ inflateInit2_
+ inflateInit_
+ inflateReset
+ inflateSetDictionary
+ inflateSync
+ uncompress
+ zlibVersion
+ gzprintf
+ gzputc
+ gzgetc
+ gzseek
+ gzrewind
+ gztell
+ gzeof
+ gzsetparams
+ zError
+ inflateSyncPoint
+ get_crc_table
+ compress2
+ gzputs
+ gzgets
Added: llvm-gcc-4.2/trunk/zlib/old/visual-basic.txt
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/visual-basic.txt?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/visual-basic.txt (added)
+++ llvm-gcc-4.2/trunk/zlib/old/visual-basic.txt Thu Nov 8 16:56:19 2007
@@ -0,0 +1,160 @@
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+ room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+ reference ("as any"), not by value ("as long"). Also check that
+ before the call of compress this length is equal to the total size of
+ the compressed buffer and not zero.
+
+
+From: "Jon Caruana" <jon-net at usa.net>
+Subject: Re: How to port zlib declares to vb?
+Date: Mon, 28 Oct 1996 18:33:03 -0600
+
+Got the answer! (I haven't had time to check this but it's what I got, and
+looks correct):
+
+He has the following routines working:
+ compress
+ uncompress
+ gzopen
+ gzwrite
+ gzread
+ gzclose
+
+Declares follow: (Quoted from Carlos Rios <c_rios at sonda.cl>, in Vb4 form)
+
+#If Win16 Then 'Use Win16 calls.
+Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
+ String, comprLen As Any, ByVal buf As String, ByVal buflen
+ As Long) As Integer
+Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
+ As String, uncomprLen As Any, ByVal compr As String, ByVal
+ lcompr As Long) As Integer
+Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
+ String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
+ Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+ As Integer
+Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
+ Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+ As Integer
+Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
+ Long) As Integer
+#Else
+Declare Function compress Lib "ZLIB32.DLL"
+ (ByVal compr As String, comprLen As Any, ByVal buf As
+ String, ByVal buflen As Long) As Integer
+Declare Function uncompress Lib "ZLIB32.DLL"
+ (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
+ String, ByVal lcompr As Long) As Long
+Declare Function gzopen Lib "ZLIB32.DLL"
+ (ByVal file As String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB32.DLL"
+ (ByVal file As Long, ByVal uncompr As String, ByVal
+ uncomprLen As Long) As Long
+Declare Function gzwrite Lib "ZLIB32.DLL"
+ (ByVal file As Long, ByVal uncompr As String, ByVal
+ uncomprLen As Long) As Long
+Declare Function gzclose Lib "ZLIB32.DLL"
+ (ByVal file As Long) As Long
+#End If
+
+-Jon Caruana
+jon-net at usa.net
+Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
+
+
+Here is another example from Michael <michael_borgsys at hotmail.com> that he
+says conforms to the VB guidelines, and that solves the problem of not
+knowing the uncompressed size by storing it at the end of the file:
+
+'Calling the functions:
+'bracket meaning: <parameter> [optional] {Range of possible values}
+'Call subCompressFile(<path with filename to compress> [, <path with
+filename to write to>, [level of compression {1..9}]])
+'Call subUncompressFile(<path with filename to compress>)
+
+Option Explicit
+Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
+Private Const SUCCESS As Long = 0
+Private Const strFilExt As String = ".cpr"
+Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
+dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
+ByVal level As Integer) As Long
+Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
+dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
+As Long
+
+Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
+strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
+ Dim strCprPth As String
+ Dim lngOriSiz As Long
+ Dim lngCprSiz As Long
+ Dim bytaryOri() As Byte
+ Dim bytaryCpr() As Byte
+ lngOriSiz = FileLen(strargOriFilPth)
+ ReDim bytaryOri(lngOriSiz - 1)
+ Open strargOriFilPth For Binary Access Read As #1
+ Get #1, , bytaryOri()
+ Close #1
+ strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
+'Select file path and name
+ strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
+strFilExt, "", strFilExt) 'Add file extension if not exists
+ lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
+more space then original file size
+ ReDim bytaryCpr(lngCprSiz - 1)
+ If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
+SUCCESS Then
+ lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
+ ReDim Preserve bytaryCpr(lngCprSiz - 1)
+ Open strCprPth For Binary Access Write As #1
+ Put #1, , bytaryCpr()
+ Put #1, , lngOriSiz 'Add the the original size value to the end
+(last 4 bytes)
+ Close #1
+ Else
+ MsgBox "Compression error"
+ End If
+ Erase bytaryCpr
+ Erase bytaryOri
+End Sub
+
+Public Sub subUncompressFile(ByVal strargFilPth As String)
+ Dim bytaryCpr() As Byte
+ Dim bytaryOri() As Byte
+ Dim lngOriSiz As Long
+ Dim lngCprSiz As Long
+ Dim strOriPth As String
+ lngCprSiz = FileLen(strargFilPth)
+ ReDim bytaryCpr(lngCprSiz - 1)
+ Open strargFilPth For Binary Access Read As #1
+ Get #1, , bytaryCpr()
+ Close #1
+ 'Read the original file size value:
+ lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
+ + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
+ + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
+ + bytaryCpr(lngCprSiz - 4)
+ ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
+ ReDim bytaryOri(lngOriSiz - 1)
+ If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
+Then
+ strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
+ Open strOriPth For Binary Access Write As #1
+ Put #1, , bytaryOri()
+ Close #1
+ Else
+ MsgBox "Uncompression error"
+ End If
+ Erase bytaryCpr
+ Erase bytaryOri
+End Sub
+Public Property Get lngPercentSmaller() As Long
+ lngPercentSmaller = lngpvtPcnSml
+End Property
Added: llvm-gcc-4.2/trunk/zlib/old/zlib.html
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/old/zlib.html?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/old/zlib.html (added)
+++ llvm-gcc-4.2/trunk/zlib/old/zlib.html Thu Nov 8 16:56:19 2007
@@ -0,0 +1,971 @@
+<html>
+<head>
+ <title>
+ zlib general purpose compression library version 1.1.4
+ </title>
+</head>
+<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
+<!-- background="zlibbg.gif" -->
+
+<h1> zlib 1.1.4 Manual </h1>
+<hr>
+<a name="Contents"><h2>Contents</h2>
+<ol type="I">
+<li> <a href="#Prologue">Prologue</a>
+<li> <a href="#Introduction">Introduction</a>
+<li> <a href="#Utility functions">Utility functions</a>
+<li> <a href="#Basic functions">Basic functions</a>
+<li> <a href="#Advanced functions">Advanced functions</a>
+<li> <a href="#Constants">Constants</a>
+<li> <a href="#struct z_stream_s">struct z_stream_s</a>
+<li> <a href="#Checksum functions">Checksum functions</a>
+<li> <a href="#Misc">Misc</a>
+</ol>
+<hr>
+<a name="Prologue"><h2> Prologue </h2>
+ 'zlib' general purpose compression library version 1.1.4, March 11th, 2002
+ <p>
+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+ <p>
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+ <p>
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+ <ol>
+ <li> The origin of this software must not be misrepresented ; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ <li> Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ <li> This notice may not be removed or altered from any source distribution.
+ </ol>
+
+ <dl>
+ <dt>Jean-loup Gailly
+ <dd><a href="mailto:jloup at gzip.org">jloup at gzip.org</a>
+ <dt>Mark Adler
+ <dd><a href="mailto:madler at alumni.caltech.edu">madler at alumni.caltech.edu</a>
+ </dl>
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files
+ <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
+ ftp://ds.internic.net/rfc/rfc1950.txt </a>
+ (zlib format),
+ <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
+ rfc1951.txt </a>
+ (<a href="#deflate">deflate</a> format) and
+ <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
+ rfc1952.txt </a>
+ (gzip format).
+ <p>
+ This manual is converted from zlib.h by
+ <a href="mailto:piaip at csie.ntu.edu.tw"> piaip </a>
+ <p>
+ Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
+ http://ftp.cdrom.com/pub/infozip/zlib/</a>
+ for the official zlib web page.
+ <p>
+
+<hr>
+<a name="Introduction"><h2> Introduction </h2>
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms will be added later and will have the same
+ stream interface.
+ <p>
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+ <p>
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio.
+ <p>
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never
+ crash even in case of corrupted input.
+ <p>
+
+<hr>
+<a name="Utility functions"><h2> Utility functions </h2>
+ The following utility functions are implemented on top of the
+ <a href="#Basic functions">basic stream-oriented functions</a>.
+ To simplify the interface, some
+ default options are assumed (compression level and memory usage,
+ standard memory allocation functions). The source code of these
+ utility functions can easily be modified if you need special options.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> int <a href="#compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
+<li> int <a href="#uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> typedef voidp gzFile;
+<li> gzFile <a href="#gzopen">gzopen</a> (const char *path, const char *mode);
+<li> gzFile <a href="#gzdopen">gzdopen</a> (int fd, const char *mode);
+<li> int <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
+<li> int <a href="#gzread">gzread</a> (gzFile file, voidp buf, unsigned len);
+<li> int <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
+<li> int VA <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
+<li> int <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
+<li> char * <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
+<li> int <a href="#gzputc">gzputc</a> (gzFile file, int c);
+<li> int <a href="#gzgetc">gzgetc</a> (gzFile file);
+<li> int <a href="#gzflush">gzflush</a> (gzFile file, int flush);
+<li> z_off_t <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
+<li> z_off_t <a href="#gztell">gztell</a> (gzFile file);
+<li> int <a href="#gzrewind">gzrewind</a> (gzFile file);
+<li> int <a href="#gzeof">gzeof</a> (gzFile file);
+<li> int <a href="#gzclose">gzclose</a> (gzFile file);
+<li> const char * <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be at least 0.1% larger than
+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+ compressed buffer.<p>
+ This function can be used to <a href="#compress">compress</a> a whole file at once if the
+ input file is mmap'ed.<p>
+ <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer.<p>
+
+<font color="Blue"><dt> int <a name="compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+ <p>
+
+ <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
+ <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
+ <p>
+
+<font color="Blue"><dt> int <a name="uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer. <p>
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+ <p>
+
+ <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
+ <p>
+
+<dt> typedef voidp gzFile;
+<dd> <p>
+
+<font color="Blue"><dt> gzFile <a name="gzopen">gzopen</a> (const char *path, const char *mode);</font>
+<dd>
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb") but can also include a compression level
+ ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+ Huffman only compression as in "wb1h". (See the description
+ of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
+ <p>
+
+ <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
+ case <a href="#gzread">gzread</a> will directly read from the file without decompression.
+ <p>
+
+ <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
+ <p>
+
+<font color="Blue"><dt> gzFile <a name="gzdopen">gzdopen</a> (int fd, const char *mode);</font>
+<dd>
+ <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd. File
+ descriptors are obtained from calls like open, dup, creat, pipe or
+ fileno (in the file has been previously opened with fopen).
+ The mode parameter is as in <a href="#gzopen">gzopen</a>.
+ <p>
+ The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+ descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
+ <p>
+ <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
+ the (de)compression <a href="#state">state</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level or strategy. See the description
+ of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
+ <p>
+ <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
+ opened for writing.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzread">gzread</a> (gzFile file, voidp buf, unsigned len);</font>
+<dd>
+ Reads the given number of uncompressed bytes from the compressed file.
+ If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
+ of bytes into the buffer.
+ <p>
+ <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
+ end of file, -1 for error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
+<dd>
+ Writes the given number of uncompressed bytes into the compressed file.
+ <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
+ (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int VA <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
+<dd>
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
+ uncompressed bytes actually written (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
+<dd>
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ <p>
+ <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> char * <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
+<dd>
+ Reads bytes from the compressed file until len-1 characters are read, or
+ a newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. The string is then terminated with a null
+ character.
+ <p>
+ <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
+<dd>
+ Writes c, converted to an unsigned char, into the compressed file.
+ <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzgetc">gzgetc</a> (gzFile file);</font>
+<dd>
+ Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
+ or -1 in case of end of file or error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
+<dd>
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
+ the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
+ <p>
+ <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
+ degrade compression.
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
+<dd>
+ Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+ <p>
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
+ starting position.
+ <p>
+ <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzrewind">gzrewind</a> (gzFile file);</font>
+<dd>
+ Rewinds the given file. This function is supported only for reading.
+ <p>
+ <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gztell">gztell</a> (gzFile file);</font>
+<dd>
+ Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+ <p>
+
+ <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
+ <p>
+
+<font color="Blue"><dt> int <a name="gzeof">gzeof</a> (gzFile file);</font>
+<dd>
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzclose">gzclose</a> (gzFile file);</font>
+<dd>
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below).
+ <p>
+
+<font color="Blue"><dt> const char * <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
+<dd>
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
+ to get the exact error code.
+ <p>
+</dl>
+<hr>
+<a name="Basic functions"><h2> Basic functions </h2>
+<h3> Function list </h3>
+<ul>
+<li> const char * <a href="#zlibVersion">zlibVersion</a> (void);
+<li> int <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
+<li> int <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+</ul>
+
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> const char * <a name="zlibVersion">zlibVersion</a> (void);</font>
+<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for compression. The fields
+ <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
+ If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ <p>
+
+ <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+ <p>
+
+ <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
+ <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit">deflateInit</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().
+ <p>
+
+<font color="Blue"><dt> int <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce some
+ output latency (reading input without producing any output) except when
+ forced to flush.<p>
+
+ The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
+ processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
+
+ <li>
+ Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+ </ul> <p>
+
+ Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
+ and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
+ output buffer because there might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In particular
+ <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
+ before the call.) Flushing may degrade compression for some compression
+ algorithms and so it should be used only when necessary.
+ <p>
+
+ If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
+ <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
+ the compression.
+ <p>
+
+ If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
+ <a href="#avail_out">avail_out</a>).
+ <p>
+
+ If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
+ pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
+ was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
+ called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
+ more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
+ <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
+ stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
+ <p>
+
+ <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
+ is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
+ 0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes. If <a href="#deflate">deflate</a> does not return
+ <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
+ <p>
+
+ <a href="#deflate">deflate</a>() sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
+ so far (that is, <a href="#total_in">total_in</a> bytes).
+ <p>
+
+ <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
+ the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+ <p>
+
+ <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
+ processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
+ consumed and all output has been produced (only when flush is set to
+ <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
+ if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
+ (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
+ stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ <a href="#msg">msg</a> may be set but then points to a static string (which must not be
+ deallocated).
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for decompression. The fields
+ <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
+ value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly ; otherwise the allocation will be deferred to the first call of
+ <a href="#inflate">inflate</a>. If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
+ version assumed by the caller. <a href="#msg">msg</a> is set to null if there is no error
+ message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
+ the zlib header if present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and
+ <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
+ <p>
+
+<font color="Blue"><dt> int <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may some
+ introduce some output latency (reading input without producing any output)
+ except when forced to flush.
+ <p>
+
+ The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
+ will resume at this point for the next call of <a href="#inflate">inflate</a>().
+
+ <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
+ <a href="#avail_out">avail_out</a> accordingly. <a href="#inflate">inflate</a>() provides as much output as possible,
+ until there is no more input data or no more space in the output buffer
+ (see below about the flush parameter).
+ </ul> <p>
+
+ Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
+ call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
+ output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
+ not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
+ and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
+ as possible anyway.
+ <p>
+
+ <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
+ <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
+ output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
+ is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
+ may be used for the single <a href="#inflate">inflate</a>() call.
+ <p>
+
+ If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
+ below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
+ dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
+ it sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
+ so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
+ an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
+ checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
+ compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
+ <p>
+
+ <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
+ or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
+ been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
+ preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect
+ <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
+ (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
+ enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
+ case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
+ compression block.
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
+ was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
+ static string (which must not be deallocated).
+</dl>
+<hr>
+<a name="Advanced functions"><h2> Advanced functions </h2>
+ The following functions are needed only in some special applications.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
+<li> int <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
+<li> int <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
+<li> int <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);
+<li> int <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int method, int windowBits, int memLevel, int strategy);</font>
+
+<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
+ fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller.<p>
+
+ The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
+ this version of the library.<p>
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ <a href="#deflateInit">deflateInit</a> is used instead.<p>
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio ; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.<p>
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
+ filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
+ Huffman coding and less string matching ; it is somewhat intermediate
+ between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.<p>
+
+ <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
+ method). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit2">deflateInit2</a> does
+ not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
+ call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy ; the data can then be compressed better than
+ with the default empty dictionary.<p>
+
+ Depending on the size of the compression data structures selected by
+ <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size in
+ <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
+ put at the end of the dictionary, not at the front.<p>
+
+ Upon return of this function, strm-> <a href="#adler">adler</a> is set to the Adler32 value
+ of the dictionary ; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)<p>
+
+ <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
+ or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
+<dd>
+ Sets the destination stream as a complete copy of the source stream.<p>
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling <a href="#deflateEnd">deflateEnd</a>. Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
+ compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
+ can consume lots of memory.<p>
+
+ <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
+ (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
+ destination.<p>
+
+<font color="Blue"><dt> int <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd> This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
+ but does not free and reallocate all the internal compression <a href="#state">state</a>.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
+
+ <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
+
+<font color="Blue"><dt> int <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different
+ strategy. If the compression level is changed, the input available so far
+ is compressed with the old level (and may be flushed); the new level will
+ take effect only at the next call of <a href="#deflate">deflate</a>().<p>
+
+ Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
+ a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
+ be compressed and flushed. In particular, strm-> <a href="#avail_out">avail_out</a> must be
+ non-zero.<p>
+
+ <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if strm->avail_out was zero.<p>
+
+<font color="Blue"><dt> int <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);</font>
+
+<dd> This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
+ fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
+ before by the caller.<p>
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
+ instead. If a compressed stream with a larger window size is given as
+ input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
+ trying to allocate a larger window.<p>
+
+ <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
+ memLevel). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#inflateInit2">inflateInit2</a>
+ does not perform any decompression apart from reading the zlib header if
+ present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
+ modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
+
+<font color="Blue"><dt> int <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
+ if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
+ can be determined from the Adler32 value returned by this call of
+ <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
+
+ <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
+ expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
+ perform any decompression: this will be done by subsequent calls of
+ <a href="#inflate">inflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+
+<dd> Skips invalid compressed data until a full flush point (see above the
+ description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
+ available input is skipped. No output is provided.<p>
+
+ <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
+ or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of <a href="#total_in">total_in</a> which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
+ until success or end of the input data.<p>
+
+<font color="Blue"><dt> int <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
+ but does not free and reallocate all the internal decompression <a href="#state">state</a>.
+ The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
+ <p>
+
+ <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
+ <p>
+</dl>
+
+<hr>
+<a name="Checksum functions"><h2> Checksum functions </h2>
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the
+ compression library.
+<h3> Function list </h3>
+<ul>
+<li> uLong <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
+<li> uLong <a href="#crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> uLong <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ <p>
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+ <pre>
+
+ uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
+ }
+ if (<a href="#adler">adler</a> != original_adler) error();
+ </pre>
+
+<font color="Blue"><dt> uLong <a name="crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running crc with the bytes buf[0..len-1] and return the updated
+ crc. If buf is NULL, this function returns the required initial value
+ for the crc. Pre- and post-conditioning (one's complement) is performed
+ within this function so it shouldn't be done by the application.
+ Usage example:
+ <pre>
+
+ uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = <a href="#crc32">crc32</a>(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+ </pre>
+</dl>
+<hr>
+<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
+<font color="Blue">
+<a name="z_stream_s">
+<pre>
+typedef struct z_stream_s {
+ Bytef *<a name="next_in">next_in</a>; /* next input byte */
+ uInt <a name="avail_in">avail_in</a>; /* number of bytes available at <a href="#next_in">next_in</a> */
+ uLong <a name="total_in">total_in</a>; /* total nb of input bytes read so far */
+
+ Bytef *<a name="next_out">next_out</a>; /* next output byte should be put there */
+ uInt <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
+ uLong <a name="total_out">total_out</a>; /* total nb of bytes output so far */
+
+ char *<a name="msg">msg</a>; /* last error message, NULL if no error */
+ struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
+
+ alloc_func <a name="zalloc">zalloc</a>; /* used to allocate the internal <a href="#state">state</a> */
+ free_func <a name="zfree">zfree</a>; /* used to free the internal <a href="#state">state</a> */
+ voidpf <a name="opaque">opaque</a>; /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
+
+ int <a name="data_type">data_type</a>; /* best guess about the data type: ascii or binary */
+ uLong <a name="adler">adler</a>; /* <a href="#adler32">adler32</a> value of the uncompressed data */
+ uLong <a name="reserved">reserved</a>; /* <a href="#reserved">reserved</a> for future use */
+} <a href="#z_stream_s">z_stream</a> ;
+
+typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>; ΓΏ
+</pre>
+</font>
+ The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
+ dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
+ has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
+ <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application. <p>
+
+ The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
+ parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ <a href="#opaque">opaque</a> value. <p>
+
+ <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
+ thread safe. <p>
+
+ On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+ <p>
+
+ The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
+ progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step). <p>
+
+<hr>
+<a name="Constants"><h2> Constants </h2>
+<font color="Blue">
+<pre>
+#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a> 0
+#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
+ /* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
+#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> 2
+#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a> 3
+#define <a name="Z_FINISH">Z_FINISH</a> 4
+/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
+
+#define <a name="Z_OK">Z_OK</a> 0
+#define <a name="Z_STREAM_END">Z_STREAM_END</a> 1
+#define <a name="Z_NEED_DICT">Z_NEED_DICT</a> 2
+#define <a name="Z_ERRNO">Z_ERRNO</a> (-1)
+#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
+#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a> (-3)
+#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a> (-4)
+#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a> (-5)
+#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a> 0
+#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a> 1
+#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a> 9
+#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> (-1)
+/* compression levels */
+
+#define <a name="Z_FILTERED">Z_FILTERED</a> 1
+#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> 2
+#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> 0
+/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
+
+#define <a name="Z_BINARY">Z_BINARY</a> 0
+#define <a name="Z_ASCII">Z_ASCII</a> 1
+#define <a name="Z_UNKNOWN">Z_UNKNOWN</a> 2
+/* Possible values of the <a href="#data_type">data_type</a> field */
+
+#define <a name="Z_DEFLATED">Z_DEFLATED</a> 8
+/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
+
+#define <a name="Z_NULL">Z_NULL</a> 0 /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
+
+#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
+/* for compatibility with versions less than 1.0.2 */
+</pre>
+</font>
+
+<hr>
+<a name="Misc"><h2> Misc </h2>
+ <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
+ and the compiler's view of <a href="#z_stream_s">z_stream</a>.
+ <p>
+ Other functions:
+ <dl>
+ <font color="Blue"><dt> const char * <a name="zError">zError</a> (int err);</font>
+ <font color="Blue"><dt> int <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
+ <font color="Blue"><dt> const uLongf * <a name="get_crc_table">get_crc_table</a> (void);</font>
+ </dl>
+ <hr>
+ <font size="-1">
+ Last update: Wed Oct 13 20:42:34 1999<br>
+ piapi at csie.ntu.edu.tw
+ </font>
+
+</body>
+</html>
Added: llvm-gcc-4.2/trunk/zlib/projects/README.projects
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/projects/README.projects?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/projects/README.projects (added)
+++ llvm-gcc-4.2/trunk/zlib/projects/README.projects Thu Nov 8 16:56:19 2007
@@ -0,0 +1,41 @@
+This directory contains project files for building zlib under various
+Integrated Development Environments (IDE).
+
+If you wish to submit a new project to this directory, you should comply
+to the following requirements. Otherwise (e.g. if you wish to integrate
+a custom piece of code that changes the zlib interface or its behavior),
+please consider submitting the project to the contrib directory.
+
+
+Requirements
+============
+
+- The project must build zlib using the source files from the official
+ zlib source distribution, exclusively.
+
+- If the project produces redistributable builds (e.g. shared objects
+ or DLL files), these builds must be compatible to those produced by
+ makefiles, if such makefiles exist in the zlib distribution.
+ In particular, if the project produces a DLL build for the Win32
+ platform, this build must comply to the officially-ammended Win32 DLL
+ Application Binary Interface (ABI), described in win32/DLL_FAQ.txt.
+
+- The project may provide additional build targets, which depend on
+ 3rd-party (unofficially-supported) software, present in the contrib
+ directory. For example, it is possible to provide an "ASM build",
+ besides the officially-supported build, and have ASM source files
+ among its dependencies.
+
+- If there are significant differences between the project files created
+ by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name
+ of the project directory should contain the version number of the IDE
+ for which the project is intended (e.g. "visualc6" for Visual C++ 6.0,
+ or "visualc7" for Visual C++ 7.0 and 7.1).
+
+
+Current projects
+================
+
+visualc6/ by Simon-Pierre Cadieux <methodex at methodex.ca>
+ and Cosmin Truta <cosmint at cs.ubbcluj.ro>
+ Project for Microsoft Visual C++ 6.0
Added: llvm-gcc-4.2/trunk/zlib/projects/visualc6/README.txt
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/projects/visualc6/README.txt?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/projects/visualc6/README.txt (added)
+++ llvm-gcc-4.2/trunk/zlib/projects/visualc6/README.txt Thu Nov 8 16:56:19 2007
@@ -0,0 +1,73 @@
+Microsoft Developer Studio Project Files, Format Version 6.00 for zlib.
+
+Copyright (C) 2000-2004 Simon-Pierre Cadieux.
+Copyright (C) 2004 Cosmin Truta.
+For conditions of distribution and use, see copyright notice in zlib.h.
+
+
+This project builds the zlib binaries as follows:
+
+* Win32_DLL_Release\zlib1.dll DLL build
+* Win32_DLL_Debug\zlib1d.dll DLL build (debug version)
+* Win32_DLL_ASM_Release\zlib1.dll DLL build using ASM code
+* Win32_DLL_ASM_Debug\zlib1d.dll DLL build using ASM code (debug version)
+* Win32_LIB_Release\zlib.lib static build
+* Win32_LIB_Debug\zlibd.lib static build (debug version)
+* Win32_LIB_ASM_Release\zlib.lib static build using ASM code
+* Win32_LIB_ASM_Debug\zlibd.lib static build using ASM code (debug version)
+
+
+For more information regarding the DLL builds, please see the DLL FAQ
+in ..\..\win32\DLL_FAQ.txt.
+
+
+To build and test:
+
+1) On the main menu, select "File | Open Workspace".
+ Open "zlib.dsw".
+
+2) Select "Build | Set Active Configuration".
+ Choose the configuration you wish to build.
+
+3) Select "Build | Clean".
+
+4) Select "Build | Build ... (F7)". Ignore warning messages about
+ not being able to find certain include files (e.g. alloc.h).
+
+5) If you built one of the sample programs (example or minigzip),
+ select "Build | Execute ... (Ctrl+F5)".
+
+
+To use:
+
+1) Select "Project | Settings (Alt+F7)".
+ Make note of the configuration names used in your project.
+ Usually, these names are "Win32 Release" and "Win32 Debug".
+
+2) In the Workspace window, select the "FileView" tab.
+ Right-click on the root item "Workspace '...'".
+ Select "Insert Project into Workspace".
+ Switch on the checkbox "Dependency of:", and select the name
+ of your project. Open "zlib.dsp".
+
+3) Select "Build | Configurations".
+ For each configuration of your project:
+ 3.1) Choose the zlib configuration you wish to use.
+ 3.2) Click on "Add".
+ 3.3) Set the new zlib configuration name to the name used by
+ the configuration from the current iteration.
+
+4) Select "Build | Set Active Configuration".
+ Choose the configuration you wish to build.
+
+5) Select "Build | Build ... (F7)".
+
+6) If you built an executable program, select
+ "Build | Execute ... (Ctrl+F5)".
+
+
+Note:
+
+To build the ASM-enabled code, you need Microsoft Assembler
+(ML.EXE). You can get it by downloading and installing the
+latest Processor Pack for Visual C++ 6.0.
Added: llvm-gcc-4.2/trunk/zlib/projects/visualc6/example.dsp
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/projects/visualc6/example.dsp?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/projects/visualc6/example.dsp (added)
+++ llvm-gcc-4.2/trunk/zlib/projects/visualc6/example.dsp Thu Nov 8 16:56:19 2007
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="example" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=example - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "example.mak" CFG="example - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "example - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "example - Win32 DLL Release"
+# Name "example - Win32 DLL Debug"
+# Name "example - Win32 DLL ASM Release"
+# Name "example - Win32 DLL ASM Debug"
+# Name "example - Win32 LIB Release"
+# Name "example - Win32 LIB Debug"
+# Name "example - Win32 LIB ASM Release"
+# Name "example - Win32 LIB ASM Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\example.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
Added: llvm-gcc-4.2/trunk/zlib/projects/visualc6/minigzip.dsp
URL: http://llvm.org/viewvc/llvm-project/llvm-gcc-4.2/trunk/zlib/projects/visualc6/minigzip.dsp?rev=43913&view=auto
==============================================================================
--- llvm-gcc-4.2/trunk/zlib/projects/visualc6/minigzip.dsp (added)
+++ llvm-gcc-4.2/trunk/zlib/projects/visualc6/minigzip.dsp Thu Nov 8 16:56:19 2007
@@ -0,0 +1,278 @@
+# Microsoft Developer Studio Project File - Name="minigzip" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=minigzip - Win32 LIB Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "minigzip.mak" CFG="minigzip - Win32 LIB Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
+!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "minigzip - Win32 DLL Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_Release"
+# PROP Intermediate_Dir "Win32_DLL_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_Debug"
+# PROP Intermediate_Dir "Win32_DLL_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_DLL_ASM_Release"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_DLL_ASM_Debug"
+# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_Release"
+# PROP Intermediate_Dir "Win32_LIB_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_Debug"
+# PROP Intermediate_Dir "Win32_LIB_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Win32_LIB_ASM_Release"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 /nologo /subsystem:console /machine:I386
+
+!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Win32_LIB_ASM_Debug"
+# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT BASE CPP /YX
+# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
+# SUBTRACT CPP /YX
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
+
+!ENDIF
+
+# Begin Target
+
+# Name "minigzip - Win32 DLL Release"
+# Name "minigzip - Win32 DLL Debug"
+# Name "minigzip - Win32 DLL ASM Release"
+# Name "minigzip - Win32 DLL ASM Debug"
+# Name "minigzip - Win32 LIB Release"
+# Name "minigzip - Win32 LIB Debug"
+# Name "minigzip - Win32 LIB ASM Release"
+# Name "minigzip - Win32 LIB ASM Debug"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
+# Begin Source File
+
+SOURCE=..\..\minigzip.c
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl"
+# Begin Source File
+
+SOURCE=..\..\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\zlib.h
+# End Source File
+# End Group
+# End Target
+# End Project
More information about the llvm-commits
mailing list