[llvm-commits] [llvm] r40825 - /llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp
Chris Lattner
sabre at nondot.org
Sat Aug 4 15:50:15 PDT 2007
Author: lattner
Date: Sat Aug 4 17:50:14 2007
New Revision: 40825
URL: http://llvm.org/viewvc/llvm-project?rev=40825&view=rev
Log:
rewrite the code used to construct pruned SSA form with the IDF method.
In the old way, we computed and inserted phi nodes for the whole IDF of
the definitions of the alloca, then computed which ones were dead and
removed them.
In the new method, we first compute the region where the value is live,
and use that information to only insert phi nodes that are live. This
eliminates the need to compute liveness later, and stops the algorithm
from inserting a bunch of phis which it then later removes.
This speeds up the testcase in PR1432 from 2.00s to 0.15s (14x) in a
release build and 6.84s->0.50s (14x) in a debug build.
Modified:
llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp
Modified: llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp?rev=40825&r1=40824&r2=40825&view=diff
==============================================================================
--- llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp (original)
+++ llvm/trunk/lib/Transforms/Utils/PromoteMemoryToRegister.cpp Sat Aug 4 17:50:14 2007
@@ -37,6 +37,7 @@
STATISTIC(NumLocalPromoted, "Number of alloca's promoted within one block");
STATISTIC(NumSingleStore, "Number of alloca's promoted with a single store");
STATISTIC(NumDeadAlloca, "Number of dead alloca's removed");
+STATISTIC(NumPHIInsert, "Number of PHI nodes inserted");
// Provide DenseMapKeyInfo for all pointers.
namespace llvm {
@@ -177,11 +178,12 @@
void DetermineInsertionPoint(AllocaInst *AI, unsigned AllocaNum,
AllocaInfo &Info);
+ void ComputeLiveInBlocks(AllocaInst *AI, AllocaInfo &Info,
+ const SmallPtrSet<BasicBlock*, 32> &DefBlocks,
+ SmallPtrSet<BasicBlock*, 32> &LiveInBlocks);
void RewriteSingleStoreAlloca(AllocaInst *AI, AllocaInfo &Info);
- void MarkDominatingPHILive(BasicBlock *BB, unsigned AllocaNum,
- SmallPtrSet<PHINode*, 16> &DeadPHINodes);
bool PromoteLocallyUsedAlloca(BasicBlock *BB, AllocaInst *AI);
void PromoteLocallyUsedAllocas(BasicBlock *BB,
const std::vector<AllocaInst*> &AIs);
@@ -491,12 +493,94 @@
}
+/// ComputeLiveInBlocks - Determine which blocks the value is live in. These
+/// are blocks which lead to uses. Knowing this allows us to avoid inserting
+/// PHI nodes into blocks which don't lead to uses (thus, the inserted phi nodes
+/// would be dead).
+void PromoteMem2Reg::
+ComputeLiveInBlocks(AllocaInst *AI, AllocaInfo &Info,
+ const SmallPtrSet<BasicBlock*, 32> &DefBlocks,
+ SmallPtrSet<BasicBlock*, 32> &LiveInBlocks) {
+
+ // To determine liveness, we must iterate through the predecessors of blocks
+ // where the def is live. Blocks are added to the worklist if we need to
+ // check their predecessors. Start with all the using blocks.
+ SmallVector<BasicBlock*, 64> LiveInBlockWorklist;
+ LiveInBlockWorklist.insert(LiveInBlockWorklist.end(),
+ Info.UsingBlocks.begin(), Info.UsingBlocks.end());
+
+ // If any of the using blocks is also a definition block, check to see if the
+ // definition occurs before or after the use. If it happens before the use,
+ // the value isn't really live-in.
+ for (unsigned i = 0, e = LiveInBlockWorklist.size(); i != e; ++i) {
+ BasicBlock *BB = LiveInBlockWorklist[i];
+ if (!DefBlocks.count(BB)) continue;
+
+ // Okay, this is a block that both uses and defines the value. If the first
+ // reference to the alloca is a def (store), then we know it isn't live-in.
+ for (BasicBlock::iterator I = BB->begin(); ; ++I) {
+ if (StoreInst *SI = dyn_cast<StoreInst>(I)) {
+ if (SI->getOperand(1) != AI) continue;
+
+ // We found a store to the alloca before a load. The alloca is not
+ // actually live-in here.
+ LiveInBlockWorklist[i] = LiveInBlockWorklist.back();
+ LiveInBlockWorklist.pop_back();
+ --i, --e;
+ break;
+ } else if (LoadInst *LI = dyn_cast<LoadInst>(I)) {
+ if (LI->getOperand(0) != AI) continue;
+
+ // Okay, we found a load before a store to the alloca. It is actually
+ // live into this block.
+ break;
+ }
+ }
+ }
+
+ // Now that we have a set of blocks where the phi is live-in, recursively add
+ // their predecessors until we find the full region the value is live.
+ while (!LiveInBlockWorklist.empty()) {
+ BasicBlock *BB = LiveInBlockWorklist.back();
+ LiveInBlockWorklist.pop_back();
+
+ // The block really is live in here, insert it into the set. If already in
+ // the set, then it has already been processed.
+ if (!LiveInBlocks.insert(BB))
+ continue;
+
+ // Since the value is live into BB, it is either defined in a predecessor or
+ // live into it to. Add the preds to the worklist unless they are a
+ // defining block.
+ for (pred_iterator PI = pred_begin(BB), E = pred_end(BB); PI != E; ++PI) {
+ BasicBlock *P = *PI;
+
+ // The value is not live into a predecessor if it defines the value.
+ if (DefBlocks.count(P))
+ continue;
+
+ // Otherwise it is, add to the worklist.
+ LiveInBlockWorklist.push_back(P);
+ }
+ }
+}
+
/// DetermineInsertionPoint - At this point, we're committed to promoting the
/// alloca using IDF's, and the standard SSA construction algorithm. Determine
/// which blocks need phi nodes and see if we can optimize out some work by
/// avoiding insertion of dead phi nodes.
void PromoteMem2Reg::DetermineInsertionPoint(AllocaInst *AI, unsigned AllocaNum,
AllocaInfo &Info) {
+
+ // Unique the set of defining blocks for efficient lookup.
+ SmallPtrSet<BasicBlock*, 32> DefBlocks;
+ DefBlocks.insert(Info.DefiningBlocks.begin(), Info.DefiningBlocks.end());
+
+ // Determine which blocks the value is live in. These are blocks which lead
+ // to uses.
+ SmallPtrSet<BasicBlock*, 32> LiveInBlocks;
+ ComputeLiveInBlocks(AI, Info, DefBlocks, LiveInBlocks);
+
// Compute the locations where PhiNodes need to be inserted. Look at the
// dominance frontier of EACH basic-block we have a write in.
unsigned CurrentVersion = 0;
@@ -506,55 +590,37 @@
BasicBlock *BB = Info.DefiningBlocks.back();
Info.DefiningBlocks.pop_back();
- // Look up the DF for this write, add it to PhiNodes
+ // Look up the DF for this write, add it to defining blocks.
DominanceFrontier::const_iterator it = DF.find(BB);
- if (it != DF.end()) {
- const DominanceFrontier::DomSetType &S = it->second;
-
- // In theory we don't need the indirection through the DFBlocks vector.
- // In practice, the order of calling QueuePhiNode would depend on the
- // (unspecified) ordering of basic blocks in the dominance frontier,
- // which would give PHI nodes non-determinstic subscripts. Fix this by
- // processing blocks in order of the occurance in the function.
- for (DominanceFrontier::DomSetType::const_iterator P = S.begin(),
- PE = S.end(); P != PE; ++P)
- DFBlocks.push_back(std::make_pair(BBNumbers[*P], *P));
+ if (it == DF.end()) continue;
+
+ const DominanceFrontier::DomSetType &S = it->second;
+
+ // In theory we don't need the indirection through the DFBlocks vector.
+ // In practice, the order of calling QueuePhiNode would depend on the
+ // (unspecified) ordering of basic blocks in the dominance frontier,
+ // which would give PHI nodes non-determinstic subscripts. Fix this by
+ // processing blocks in order of the occurance in the function.
+ for (DominanceFrontier::DomSetType::const_iterator P = S.begin(),
+ PE = S.end(); P != PE; ++P) {
+ // If the frontier block is not in the live-in set for the alloca, don't
+ // bother processing it.
+ if (!LiveInBlocks.count(*P))
+ continue;
- // Sort by which the block ordering in the function.
+ DFBlocks.push_back(std::make_pair(BBNumbers[*P], *P));
+ }
+
+ // Sort by which the block ordering in the function.
+ if (DFBlocks.size() > 1)
std::sort(DFBlocks.begin(), DFBlocks.end());
-
- for (unsigned i = 0, e = DFBlocks.size(); i != e; ++i) {
- BasicBlock *BB = DFBlocks[i].second;
- if (QueuePhiNode(BB, AllocaNum, CurrentVersion, InsertedPHINodes))
- Info.DefiningBlocks.push_back(BB);
- }
- DFBlocks.clear();
+
+ for (unsigned i = 0, e = DFBlocks.size(); i != e; ++i) {
+ BasicBlock *BB = DFBlocks[i].second;
+ if (QueuePhiNode(BB, AllocaNum, CurrentVersion, InsertedPHINodes))
+ Info.DefiningBlocks.push_back(BB);
}
- }
-
- // Now that we have inserted PHI nodes along the Iterated Dominance Frontier
- // of the writes to the variable, scan through the reads of the variable,
- // marking PHI nodes which are actually necessary as alive (by removing them
- // from the InsertedPHINodes set). This is not perfect: there may PHI
- // marked alive because of loads which are dominated by stores, but there
- // will be no unmarked PHI nodes which are actually used.
- //
- for (unsigned i = 0, e = Info.UsingBlocks.size(); i != e; ++i)
- MarkDominatingPHILive(Info.UsingBlocks[i], AllocaNum, InsertedPHINodes);
- Info.UsingBlocks.clear();
-
- // If there are any PHI nodes which are now known to be dead, remove them!
- for (SmallPtrSet<PHINode*, 16>::iterator I = InsertedPHINodes.begin(),
- E = InsertedPHINodes.end(); I != E; ++I) {
- PHINode *PN = *I;
- bool Erased=NewPhiNodes.erase(std::make_pair(PN->getParent(), AllocaNum));
- Erased=Erased;
- assert(Erased && "PHI already removed?");
-
- if (AST && isa<PointerType>(PN->getType()))
- AST->deleteValue(PN);
- PN->eraseFromParent();
- PhiToAllocaMap.erase(PN);
+ DFBlocks.clear();
}
}
@@ -622,41 +688,6 @@
}
-// MarkDominatingPHILive - Mem2Reg wants to construct "pruned" SSA form, not
-// "minimal" SSA form. To do this, it inserts all of the PHI nodes on the IDF
-// as usual (inserting the PHI nodes in the DeadPHINodes set), then processes
-// each read of the variable. For each block that reads the variable, this
-// function is called, which removes used PHI nodes from the DeadPHINodes set.
-// After all of the reads have been processed, any PHI nodes left in the
-// DeadPHINodes set are removed.
-//
-void PromoteMem2Reg::MarkDominatingPHILive(BasicBlock *BB, unsigned AllocaNum,
- SmallPtrSet<PHINode*, 16> &DeadPHINodes) {
- // Scan the immediate dominators of this block looking for a block which has a
- // PHI node for Alloca num. If we find it, mark the PHI node as being alive!
- DomTreeNode *IDomNode = DT.getNode(BB);
- for (DomTreeNode *IDom = IDomNode; IDom; IDom = IDom->getIDom()) {
- BasicBlock *DomBB = IDom->getBlock();
- DenseMap<std::pair<BasicBlock*, unsigned>, PHINode*>::iterator
- I = NewPhiNodes.find(std::make_pair(DomBB, AllocaNum));
- if (I == NewPhiNodes.end()) continue;
-
- // Ok, we found an inserted PHI node which dominates this value.
- PHINode *DominatingPHI = I->second;
-
- // Find out if we previously thought it was dead. If so, mark it as being
- // live by removing it from the DeadPHINodes set.
- if (!DeadPHINodes.erase(DominatingPHI))
- continue;
-
- // Now that we have marked the PHI node alive, also mark any PHI nodes
- // which it might use as being alive as well.
- for (pred_iterator PI = pred_begin(DomBB), PE = pred_end(DomBB);
- PI != PE; ++PI)
- MarkDominatingPHILive(*PI, AllocaNum, DeadPHINodes);
- }
-}
-
/// PromoteLocallyUsedAlloca - Many allocas are only used within a single basic
/// block. If this is the case, avoid traversing the CFG and inserting a lot of
/// potentially useless PHI nodes by just performing a single linear pass over
@@ -799,6 +830,7 @@
PN = new PHINode(Allocas[AllocaNo]->getAllocatedType(),
Allocas[AllocaNo]->getName() + "." +
utostr(Version++), BB->begin());
+ ++NumPHIInsert;
PhiToAllocaMap[PN] = AllocaNo;
PN->reserveOperandSpace(getNumPreds(BB));
More information about the llvm-commits
mailing list