[llvm-commits] CVS: llvm/lib/CodeGen/SimpleRegisterCoalescing.cpp RegAllocLinearScan.cpp LiveIntervalAnalysis.cpp
David Greene
greened at obbligato.org
Fri Jun 8 10:19:20 PDT 2007
Changes in directory llvm/lib/CodeGen:
SimpleRegisterCoalescing.cpp added (r1.1)
RegAllocLinearScan.cpp updated: 1.149 -> 1.150
LiveIntervalAnalysis.cpp updated: 1.245 -> 1.246
---
Log message:
Factor live variable analysis so it does not do register coalescing
simultaneously. Move that pass to SimpleRegisterCoalescing.
This makes it easier to implement alternative register allocation and
coalescing strategies while maintaining reuse of the existing live
interval analysis.
---
Diffs of the changes: (+1142 -1055)
LiveIntervalAnalysis.cpp | 1058 ---------------------------------------
RegAllocLinearScan.cpp | 1
SimpleRegisterCoalescing.cpp | 1138 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1142 insertions(+), 1055 deletions(-)
Index: llvm/lib/CodeGen/SimpleRegisterCoalescing.cpp
diff -c /dev/null llvm/lib/CodeGen/SimpleRegisterCoalescing.cpp:1.1
*** /dev/null Fri Jun 8 12:19:06 2007
--- llvm/lib/CodeGen/SimpleRegisterCoalescing.cpp Fri Jun 8 12:18:56 2007
***************
*** 0 ****
--- 1,1138 ----
+ //===-- SimpleRegisterCoalescing.cpp - Register Coalescing ----------------===//
+ //
+ // The LLVM Compiler Infrastructure
+ //
+ // This file was developed by the LLVM research group and is distributed under
+ // the University of Illinois Open Source License. See LICENSE.TXT for details.
+ //
+ //===----------------------------------------------------------------------===//
+ //
+ // This file implements a simple register coalescing pass that attempts to
+ // aggressively coalesce every register copy that it can.
+ //
+ //===----------------------------------------------------------------------===//
+
+ #define DEBUG_TYPE "simpleregistercoalescing"
+ #include "llvm/CodeGen/SimpleRegisterCoalescing.h"
+ #include "llvm/CodeGen/LiveIntervalAnalysis.h"
+ #include "VirtRegMap.h"
+ #include "llvm/Value.h"
+ #include "llvm/Analysis/LoopInfo.h"
+ #include "llvm/CodeGen/LiveVariables.h"
+ #include "llvm/CodeGen/MachineFrameInfo.h"
+ #include "llvm/CodeGen/MachineInstr.h"
+ #include "llvm/CodeGen/Passes.h"
+ #include "llvm/CodeGen/SSARegMap.h"
+ #include "llvm/Target/MRegisterInfo.h"
+ #include "llvm/Target/TargetInstrInfo.h"
+ #include "llvm/Target/TargetMachine.h"
+ #include "llvm/Support/CommandLine.h"
+ #include "llvm/Support/Debug.h"
+ #include "llvm/ADT/SmallSet.h"
+ #include "llvm/ADT/Statistic.h"
+ #include "llvm/ADT/STLExtras.h"
+ #include <algorithm>
+ #include <cmath>
+ using namespace llvm;
+
+ STATISTIC(numJoins , "Number of interval joins performed");
+ STATISTIC(numPeep , "Number of identity moves eliminated after coalescing");
+ STATISTIC(numAborts , "Number of times interval joining aborted");
+
+ char SimpleRegisterCoalescing::ID = 0;
+ namespace {
+ static cl::opt<bool>
+ EnableJoining("join-liveintervals",
+ cl::desc("Coallesce copies (default=true)"),
+ cl::init(true));
+
+ RegisterPass<SimpleRegisterCoalescing>
+ X("simple-register-coalescing",
+ "Simple register coalescing to eliminate all possible register copies");
+ }
+
+ const PassInfo *llvm::SimpleRegisterCoalescingID = X.getPassInfo();
+
+ void SimpleRegisterCoalescing::getAnalysisUsage(AnalysisUsage &AU) const {
+ //AU.addPreserved<LiveVariables>();
+ AU.addPreserved<LiveIntervals>();
+ AU.addPreservedID(PHIEliminationID);
+ AU.addPreservedID(TwoAddressInstructionPassID);
+ AU.addRequired<LiveVariables>();
+ AU.addRequired<LiveIntervals>();
+ AU.addRequired<LoopInfo>();
+ MachineFunctionPass::getAnalysisUsage(AU);
+ }
+
+ /// AdjustCopiesBackFrom - We found a non-trivially-coallescable copy with IntA
+ /// being the source and IntB being the dest, thus this defines a value number
+ /// in IntB. If the source value number (in IntA) is defined by a copy from B,
+ /// see if we can merge these two pieces of B into a single value number,
+ /// eliminating a copy. For example:
+ ///
+ /// A3 = B0
+ /// ...
+ /// B1 = A3 <- this copy
+ ///
+ /// In this case, B0 can be extended to where the B1 copy lives, allowing the B1
+ /// value number to be replaced with B0 (which simplifies the B liveinterval).
+ ///
+ /// This returns true if an interval was modified.
+ ///
+ bool SimpleRegisterCoalescing::AdjustCopiesBackFrom(LiveInterval &IntA, LiveInterval &IntB,
+ MachineInstr *CopyMI) {
+ unsigned CopyIdx = li_->getDefIndex(li_->getInstructionIndex(CopyMI));
+
+ // BValNo is a value number in B that is defined by a copy from A. 'B3' in
+ // the example above.
+ LiveInterval::iterator BLR = IntB.FindLiveRangeContaining(CopyIdx);
+ unsigned BValNo = BLR->ValId;
+
+ // Get the location that B is defined at. Two options: either this value has
+ // an unknown definition point or it is defined at CopyIdx. If unknown, we
+ // can't process it.
+ unsigned BValNoDefIdx = IntB.getInstForValNum(BValNo);
+ if (BValNoDefIdx == ~0U) return false;
+ assert(BValNoDefIdx == CopyIdx &&
+ "Copy doesn't define the value?");
+
+ // AValNo is the value number in A that defines the copy, A0 in the example.
+ LiveInterval::iterator AValLR = IntA.FindLiveRangeContaining(CopyIdx-1);
+ unsigned AValNo = AValLR->ValId;
+
+ // If AValNo is defined as a copy from IntB, we can potentially process this.
+
+ // Get the instruction that defines this value number.
+ unsigned SrcReg = IntA.getSrcRegForValNum(AValNo);
+ if (!SrcReg) return false; // Not defined by a copy.
+
+ // If the value number is not defined by a copy instruction, ignore it.
+
+ // If the source register comes from an interval other than IntB, we can't
+ // handle this.
+ if (rep(SrcReg) != IntB.reg) return false;
+
+ // Get the LiveRange in IntB that this value number starts with.
+ unsigned AValNoInstIdx = IntA.getInstForValNum(AValNo);
+ LiveInterval::iterator ValLR = IntB.FindLiveRangeContaining(AValNoInstIdx-1);
+
+ // Make sure that the end of the live range is inside the same block as
+ // CopyMI.
+ MachineInstr *ValLREndInst = li_->getInstructionFromIndex(ValLR->end-1);
+ if (!ValLREndInst ||
+ ValLREndInst->getParent() != CopyMI->getParent()) return false;
+
+ // Okay, we now know that ValLR ends in the same block that the CopyMI
+ // live-range starts. If there are no intervening live ranges between them in
+ // IntB, we can merge them.
+ if (ValLR+1 != BLR) return false;
+
+ DOUT << "\nExtending: "; IntB.print(DOUT, mri_);
+
+ // We are about to delete CopyMI, so need to remove it as the 'instruction
+ // that defines this value #'.
+ IntB.setValueNumberInfo(BValNo, std::make_pair(~0U, 0));
+
+ // Okay, we can merge them. We need to insert a new liverange:
+ // [ValLR.end, BLR.begin) of either value number, then we merge the
+ // two value numbers.
+ unsigned FillerStart = ValLR->end, FillerEnd = BLR->start;
+ IntB.addRange(LiveRange(FillerStart, FillerEnd, BValNo));
+
+ // If the IntB live range is assigned to a physical register, and if that
+ // physreg has aliases,
+ if (MRegisterInfo::isPhysicalRegister(IntB.reg)) {
+ // Update the liveintervals of sub-registers.
+ for (const unsigned *AS = mri_->getSubRegisters(IntB.reg); *AS; ++AS) {
+ LiveInterval &AliasLI = li_->getInterval(*AS);
+ AliasLI.addRange(LiveRange(FillerStart, FillerEnd,
+ AliasLI.getNextValue(~0U, 0)));
+ }
+ }
+
+ // Okay, merge "B1" into the same value number as "B0".
+ if (BValNo != ValLR->ValId)
+ IntB.MergeValueNumberInto(BValNo, ValLR->ValId);
+ DOUT << " result = "; IntB.print(DOUT, mri_);
+ DOUT << "\n";
+
+ // If the source instruction was killing the source register before the
+ // merge, unset the isKill marker given the live range has been extended.
+ int UIdx = ValLREndInst->findRegisterUseOperandIdx(IntB.reg, true);
+ if (UIdx != -1)
+ ValLREndInst->getOperand(UIdx).unsetIsKill();
+
+ // Finally, delete the copy instruction.
+ li_->RemoveMachineInstrFromMaps(CopyMI);
+ CopyMI->eraseFromParent();
+ ++numPeep;
+ return true;
+ }
+
+ /// JoinCopy - Attempt to join intervals corresponding to SrcReg/DstReg,
+ /// which are the src/dst of the copy instruction CopyMI. This returns true
+ /// if the copy was successfully coallesced away, or if it is never possible
+ /// to coallesce this copy, due to register constraints. It returns
+ /// false if it is not currently possible to coallesce this interval, but
+ /// it may be possible if other things get coallesced.
+ bool SimpleRegisterCoalescing::JoinCopy(MachineInstr *CopyMI,
+ unsigned SrcReg, unsigned DstReg, bool PhysOnly) {
+ DOUT << li_->getInstructionIndex(CopyMI) << '\t' << *CopyMI;
+
+ // Get representative registers.
+ unsigned repSrcReg = rep(SrcReg);
+ unsigned repDstReg = rep(DstReg);
+
+ // If they are already joined we continue.
+ if (repSrcReg == repDstReg) {
+ DOUT << "\tCopy already coallesced.\n";
+ return true; // Not coallescable.
+ }
+
+ bool SrcIsPhys = MRegisterInfo::isPhysicalRegister(repSrcReg);
+ bool DstIsPhys = MRegisterInfo::isPhysicalRegister(repDstReg);
+ if (PhysOnly && !SrcIsPhys && !DstIsPhys)
+ // Only joining physical registers with virtual registers in this round.
+ return true;
+
+ // If they are both physical registers, we cannot join them.
+ if (SrcIsPhys && DstIsPhys) {
+ DOUT << "\tCan not coallesce physregs.\n";
+ return true; // Not coallescable.
+ }
+
+ // We only join virtual registers with allocatable physical registers.
+ if (SrcIsPhys && !allocatableRegs_[repSrcReg]) {
+ DOUT << "\tSrc reg is unallocatable physreg.\n";
+ return true; // Not coallescable.
+ }
+ if (DstIsPhys && !allocatableRegs_[repDstReg]) {
+ DOUT << "\tDst reg is unallocatable physreg.\n";
+ return true; // Not coallescable.
+ }
+
+ // If they are not of the same register class, we cannot join them.
+ if (differingRegisterClasses(repSrcReg, repDstReg)) {
+ DOUT << "\tSrc/Dest are different register classes.\n";
+ return true; // Not coallescable.
+ }
+
+ LiveInterval &SrcInt = li_->getInterval(repSrcReg);
+ LiveInterval &DstInt = li_->getInterval(repDstReg);
+ assert(SrcInt.reg == repSrcReg && DstInt.reg == repDstReg &&
+ "Register mapping is horribly broken!");
+
+ DOUT << "\t\tInspecting "; SrcInt.print(DOUT, mri_);
+ DOUT << " and "; DstInt.print(DOUT, mri_);
+ DOUT << ": ";
+
+ // Check if it is necessary to propagate "isDead" property before intervals
+ // are joined.
+ MachineOperand *mopd = CopyMI->findRegisterDefOperand(DstReg);
+ bool isDead = mopd->isDead();
+ bool isShorten = false;
+ unsigned SrcStart = 0, RemoveStart = 0;
+ unsigned SrcEnd = 0, RemoveEnd = 0;
+ if (isDead) {
+ unsigned CopyIdx = li_->getInstructionIndex(CopyMI);
+ LiveInterval::iterator SrcLR =
+ SrcInt.FindLiveRangeContaining(li_->getUseIndex(CopyIdx));
+ RemoveStart = SrcStart = SrcLR->start;
+ RemoveEnd = SrcEnd = SrcLR->end;
+ // The instruction which defines the src is only truly dead if there are
+ // no intermediate uses and there isn't a use beyond the copy.
+ // FIXME: find the last use, mark is kill and shorten the live range.
+ if (SrcEnd > li_->getDefIndex(CopyIdx)) {
+ isDead = false;
+ } else {
+ MachineOperand *MOU;
+ MachineInstr *LastUse= lastRegisterUse(SrcStart, CopyIdx, repSrcReg, MOU);
+ if (LastUse) {
+ // Shorten the liveinterval to the end of last use.
+ MOU->setIsKill();
+ isDead = false;
+ isShorten = true;
+ RemoveStart = li_->getDefIndex(li_->getInstructionIndex(LastUse));
+ RemoveEnd = SrcEnd;
+ } else {
+ MachineInstr *SrcMI = li_->getInstructionFromIndex(SrcStart);
+ if (SrcMI) {
+ MachineOperand *mops = findDefOperand(SrcMI, repSrcReg);
+ if (mops)
+ // A dead def should have a single cycle interval.
+ ++RemoveStart;
+ }
+ }
+ }
+ }
+
+ // We need to be careful about coalescing a source physical register with a
+ // virtual register. Once the coalescing is done, it cannot be broken and
+ // these are not spillable! If the destination interval uses are far away,
+ // think twice about coalescing them!
+ if (!mopd->isDead() && (SrcIsPhys || DstIsPhys)) {
+ LiveInterval &JoinVInt = SrcIsPhys ? DstInt : SrcInt;
+ unsigned JoinVReg = SrcIsPhys ? repDstReg : repSrcReg;
+ unsigned JoinPReg = SrcIsPhys ? repSrcReg : repDstReg;
+ const TargetRegisterClass *RC = mf_->getSSARegMap()->getRegClass(JoinVReg);
+ unsigned Threshold = allocatableRCRegs_[RC].count();
+
+ // If the virtual register live interval is long has it has low use desity,
+ // do not join them, instead mark the physical register as its allocation
+ // preference.
+ unsigned Length = JoinVInt.getSize() / InstrSlots::NUM;
+ LiveVariables::VarInfo &vi = lv_->getVarInfo(JoinVReg);
+ if (Length > Threshold &&
+ (((float)vi.NumUses / Length) < (1.0 / Threshold))) {
+ JoinVInt.preference = JoinPReg;
+ ++numAborts;
+ DOUT << "\tMay tie down a physical register, abort!\n";
+ return false;
+ }
+ }
+
+ // Okay, attempt to join these two intervals. On failure, this returns false.
+ // Otherwise, if one of the intervals being joined is a physreg, this method
+ // always canonicalizes DstInt to be it. The output "SrcInt" will not have
+ // been modified, so we can use this information below to update aliases.
+ if (JoinIntervals(DstInt, SrcInt)) {
+ if (isDead) {
+ // Result of the copy is dead. Propagate this property.
+ if (SrcStart == 0) {
+ assert(MRegisterInfo::isPhysicalRegister(repSrcReg) &&
+ "Live-in must be a physical register!");
+ // Live-in to the function but dead. Remove it from entry live-in set.
+ // JoinIntervals may end up swapping the two intervals.
+ mf_->begin()->removeLiveIn(repSrcReg);
+ } else {
+ MachineInstr *SrcMI = li_->getInstructionFromIndex(SrcStart);
+ if (SrcMI) {
+ MachineOperand *mops = findDefOperand(SrcMI, repSrcReg);
+ if (mops)
+ mops->setIsDead();
+ }
+ }
+ }
+
+ if (isShorten || isDead) {
+ // Shorten the live interval.
+ LiveInterval &LiveInInt = (repSrcReg == DstInt.reg) ? DstInt : SrcInt;
+ LiveInInt.removeRange(RemoveStart, RemoveEnd);
+ }
+ } else {
+ // Coallescing failed.
+
+ // If we can eliminate the copy without merging the live ranges, do so now.
+ if (AdjustCopiesBackFrom(SrcInt, DstInt, CopyMI))
+ return true;
+
+ // Otherwise, we are unable to join the intervals.
+ DOUT << "Interference!\n";
+ return false;
+ }
+
+ bool Swapped = repSrcReg == DstInt.reg;
+ if (Swapped)
+ std::swap(repSrcReg, repDstReg);
+ assert(MRegisterInfo::isVirtualRegister(repSrcReg) &&
+ "LiveInterval::join didn't work right!");
+
+ // If we're about to merge live ranges into a physical register live range,
+ // we have to update any aliased register's live ranges to indicate that they
+ // have clobbered values for this range.
+ if (MRegisterInfo::isPhysicalRegister(repDstReg)) {
+ // Unset unnecessary kills.
+ if (!DstInt.containsOneValue()) {
+ for (LiveInterval::Ranges::const_iterator I = SrcInt.begin(),
+ E = SrcInt.end(); I != E; ++I)
+ unsetRegisterKills(I->start, I->end, repDstReg);
+ }
+
+ // Update the liveintervals of sub-registers.
+ for (const unsigned *AS = mri_->getSubRegisters(repDstReg); *AS; ++AS)
+ li_->getInterval(*AS).MergeInClobberRanges(SrcInt);
+ } else {
+ // Merge use info if the destination is a virtual register.
+ LiveVariables::VarInfo& dVI = lv_->getVarInfo(repDstReg);
+ LiveVariables::VarInfo& sVI = lv_->getVarInfo(repSrcReg);
+ dVI.NumUses += sVI.NumUses;
+ }
+
+ DOUT << "\n\t\tJoined. Result = "; DstInt.print(DOUT, mri_);
+ DOUT << "\n";
+
+ // Remember these liveintervals have been joined.
+ JoinedLIs.set(repSrcReg - MRegisterInfo::FirstVirtualRegister);
+ if (MRegisterInfo::isVirtualRegister(repDstReg))
+ JoinedLIs.set(repDstReg - MRegisterInfo::FirstVirtualRegister);
+
+ // If the intervals were swapped by Join, swap them back so that the register
+ // mapping (in the r2i map) is correct.
+ if (Swapped) SrcInt.swap(DstInt);
+ li_->removeInterval(repSrcReg);
+ r2rMap_[repSrcReg] = repDstReg;
+
+ // Finally, delete the copy instruction.
+ li_->RemoveMachineInstrFromMaps(CopyMI);
+ CopyMI->eraseFromParent();
+ ++numPeep;
+ ++numJoins;
+ return true;
+ }
+
+ /// ComputeUltimateVN - Assuming we are going to join two live intervals,
+ /// compute what the resultant value numbers for each value in the input two
+ /// ranges will be. This is complicated by copies between the two which can
+ /// and will commonly cause multiple value numbers to be merged into one.
+ ///
+ /// VN is the value number that we're trying to resolve. InstDefiningValue
+ /// keeps track of the new InstDefiningValue assignment for the result
+ /// LiveInterval. ThisFromOther/OtherFromThis are sets that keep track of
+ /// whether a value in this or other is a copy from the opposite set.
+ /// ThisValNoAssignments/OtherValNoAssignments keep track of value #'s that have
+ /// already been assigned.
+ ///
+ /// ThisFromOther[x] - If x is defined as a copy from the other interval, this
+ /// contains the value number the copy is from.
+ ///
+ static unsigned ComputeUltimateVN(unsigned VN,
+ SmallVector<std::pair<unsigned,
+ unsigned>, 16> &ValueNumberInfo,
+ SmallVector<int, 16> &ThisFromOther,
+ SmallVector<int, 16> &OtherFromThis,
+ SmallVector<int, 16> &ThisValNoAssignments,
+ SmallVector<int, 16> &OtherValNoAssignments,
+ LiveInterval &ThisLI, LiveInterval &OtherLI) {
+ // If the VN has already been computed, just return it.
+ if (ThisValNoAssignments[VN] >= 0)
+ return ThisValNoAssignments[VN];
+ // assert(ThisValNoAssignments[VN] != -2 && "Cyclic case?");
+
+ // If this val is not a copy from the other val, then it must be a new value
+ // number in the destination.
+ int OtherValNo = ThisFromOther[VN];
+ if (OtherValNo == -1) {
+ ValueNumberInfo.push_back(ThisLI.getValNumInfo(VN));
+ return ThisValNoAssignments[VN] = ValueNumberInfo.size()-1;
+ }
+
+ // Otherwise, this *is* a copy from the RHS. If the other side has already
+ // been computed, return it.
+ if (OtherValNoAssignments[OtherValNo] >= 0)
+ return ThisValNoAssignments[VN] = OtherValNoAssignments[OtherValNo];
+
+ // Mark this value number as currently being computed, then ask what the
+ // ultimate value # of the other value is.
+ ThisValNoAssignments[VN] = -2;
+ unsigned UltimateVN =
+ ComputeUltimateVN(OtherValNo, ValueNumberInfo,
+ OtherFromThis, ThisFromOther,
+ OtherValNoAssignments, ThisValNoAssignments,
+ OtherLI, ThisLI);
+ return ThisValNoAssignments[VN] = UltimateVN;
+ }
+
+ static bool InVector(unsigned Val, const SmallVector<unsigned, 8> &V) {
+ return std::find(V.begin(), V.end(), Val) != V.end();
+ }
+
+ /// SimpleJoin - Attempt to joint the specified interval into this one. The
+ /// caller of this method must guarantee that the RHS only contains a single
+ /// value number and that the RHS is not defined by a copy from this
+ /// interval. This returns false if the intervals are not joinable, or it
+ /// joins them and returns true.
+ bool SimpleRegisterCoalescing::SimpleJoin(LiveInterval &LHS, LiveInterval &RHS) {
+ assert(RHS.containsOneValue());
+
+ // Some number (potentially more than one) value numbers in the current
+ // interval may be defined as copies from the RHS. Scan the overlapping
+ // portions of the LHS and RHS, keeping track of this and looking for
+ // overlapping live ranges that are NOT defined as copies. If these exist, we
+ // cannot coallesce.
+
+ LiveInterval::iterator LHSIt = LHS.begin(), LHSEnd = LHS.end();
+ LiveInterval::iterator RHSIt = RHS.begin(), RHSEnd = RHS.end();
+
+ if (LHSIt->start < RHSIt->start) {
+ LHSIt = std::upper_bound(LHSIt, LHSEnd, RHSIt->start);
+ if (LHSIt != LHS.begin()) --LHSIt;
+ } else if (RHSIt->start < LHSIt->start) {
+ RHSIt = std::upper_bound(RHSIt, RHSEnd, LHSIt->start);
+ if (RHSIt != RHS.begin()) --RHSIt;
+ }
+
+ SmallVector<unsigned, 8> EliminatedLHSVals;
+
+ while (1) {
+ // Determine if these live intervals overlap.
+ bool Overlaps = false;
+ if (LHSIt->start <= RHSIt->start)
+ Overlaps = LHSIt->end > RHSIt->start;
+ else
+ Overlaps = RHSIt->end > LHSIt->start;
+
+ // If the live intervals overlap, there are two interesting cases: if the
+ // LHS interval is defined by a copy from the RHS, it's ok and we record
+ // that the LHS value # is the same as the RHS. If it's not, then we cannot
+ // coallesce these live ranges and we bail out.
+ if (Overlaps) {
+ // If we haven't already recorded that this value # is safe, check it.
+ if (!InVector(LHSIt->ValId, EliminatedLHSVals)) {
+ // Copy from the RHS?
+ unsigned SrcReg = LHS.getSrcRegForValNum(LHSIt->ValId);
+ if (rep(SrcReg) != RHS.reg)
+ return false; // Nope, bail out.
+
+ EliminatedLHSVals.push_back(LHSIt->ValId);
+ }
+
+ // We know this entire LHS live range is okay, so skip it now.
+ if (++LHSIt == LHSEnd) break;
+ continue;
+ }
+
+ if (LHSIt->end < RHSIt->end) {
+ if (++LHSIt == LHSEnd) break;
+ } else {
+ // One interesting case to check here. It's possible that we have
+ // something like "X3 = Y" which defines a new value number in the LHS,
+ // and is the last use of this liverange of the RHS. In this case, we
+ // want to notice this copy (so that it gets coallesced away) even though
+ // the live ranges don't actually overlap.
+ if (LHSIt->start == RHSIt->end) {
+ if (InVector(LHSIt->ValId, EliminatedLHSVals)) {
+ // We already know that this value number is going to be merged in
+ // if coallescing succeeds. Just skip the liverange.
+ if (++LHSIt == LHSEnd) break;
+ } else {
+ // Otherwise, if this is a copy from the RHS, mark it as being merged
+ // in.
+ if (rep(LHS.getSrcRegForValNum(LHSIt->ValId)) == RHS.reg) {
+ EliminatedLHSVals.push_back(LHSIt->ValId);
+
+ // We know this entire LHS live range is okay, so skip it now.
+ if (++LHSIt == LHSEnd) break;
+ }
+ }
+ }
+
+ if (++RHSIt == RHSEnd) break;
+ }
+ }
+
+ // If we got here, we know that the coallescing will be successful and that
+ // the value numbers in EliminatedLHSVals will all be merged together. Since
+ // the most common case is that EliminatedLHSVals has a single number, we
+ // optimize for it: if there is more than one value, we merge them all into
+ // the lowest numbered one, then handle the interval as if we were merging
+ // with one value number.
+ unsigned LHSValNo;
+ if (EliminatedLHSVals.size() > 1) {
+ // Loop through all the equal value numbers merging them into the smallest
+ // one.
+ unsigned Smallest = EliminatedLHSVals[0];
+ for (unsigned i = 1, e = EliminatedLHSVals.size(); i != e; ++i) {
+ if (EliminatedLHSVals[i] < Smallest) {
+ // Merge the current notion of the smallest into the smaller one.
+ LHS.MergeValueNumberInto(Smallest, EliminatedLHSVals[i]);
+ Smallest = EliminatedLHSVals[i];
+ } else {
+ // Merge into the smallest.
+ LHS.MergeValueNumberInto(EliminatedLHSVals[i], Smallest);
+ }
+ }
+ LHSValNo = Smallest;
+ } else {
+ assert(!EliminatedLHSVals.empty() && "No copies from the RHS?");
+ LHSValNo = EliminatedLHSVals[0];
+ }
+
+ // Okay, now that there is a single LHS value number that we're merging the
+ // RHS into, update the value number info for the LHS to indicate that the
+ // value number is defined where the RHS value number was.
+ LHS.setValueNumberInfo(LHSValNo, RHS.getValNumInfo(0));
+
+ // Okay, the final step is to loop over the RHS live intervals, adding them to
+ // the LHS.
+ LHS.MergeRangesInAsValue(RHS, LHSValNo);
+ LHS.weight += RHS.weight;
+ if (RHS.preference && !LHS.preference)
+ LHS.preference = RHS.preference;
+
+ return true;
+ }
+
+ /// JoinIntervals - Attempt to join these two intervals. On failure, this
+ /// returns false. Otherwise, if one of the intervals being joined is a
+ /// physreg, this method always canonicalizes LHS to be it. The output
+ /// "RHS" will not have been modified, so we can use this information
+ /// below to update aliases.
+ bool SimpleRegisterCoalescing::JoinIntervals(LiveInterval &LHS, LiveInterval &RHS) {
+ // Compute the final value assignment, assuming that the live ranges can be
+ // coallesced.
+ SmallVector<int, 16> LHSValNoAssignments;
+ SmallVector<int, 16> RHSValNoAssignments;
+ SmallVector<std::pair<unsigned,unsigned>, 16> ValueNumberInfo;
+
+ // If a live interval is a physical register, conservatively check if any
+ // of its sub-registers is overlapping the live interval of the virtual
+ // register. If so, do not coalesce.
+ if (MRegisterInfo::isPhysicalRegister(LHS.reg) &&
+ *mri_->getSubRegisters(LHS.reg)) {
+ for (const unsigned* SR = mri_->getSubRegisters(LHS.reg); *SR; ++SR)
+ if (li_->hasInterval(*SR) && RHS.overlaps(li_->getInterval(*SR))) {
+ DOUT << "Interfere with sub-register ";
+ DEBUG(li_->getInterval(*SR).print(DOUT, mri_));
+ return false;
+ }
+ } else if (MRegisterInfo::isPhysicalRegister(RHS.reg) &&
+ *mri_->getSubRegisters(RHS.reg)) {
+ for (const unsigned* SR = mri_->getSubRegisters(RHS.reg); *SR; ++SR)
+ if (li_->hasInterval(*SR) && LHS.overlaps(li_->getInterval(*SR))) {
+ DOUT << "Interfere with sub-register ";
+ DEBUG(li_->getInterval(*SR).print(DOUT, mri_));
+ return false;
+ }
+ }
+
+ // Compute ultimate value numbers for the LHS and RHS values.
+ if (RHS.containsOneValue()) {
+ // Copies from a liveinterval with a single value are simple to handle and
+ // very common, handle the special case here. This is important, because
+ // often RHS is small and LHS is large (e.g. a physreg).
+
+ // Find out if the RHS is defined as a copy from some value in the LHS.
+ int RHSValID = -1;
+ std::pair<unsigned,unsigned> RHSValNoInfo;
+ unsigned RHSSrcReg = RHS.getSrcRegForValNum(0);
+ if ((RHSSrcReg == 0 || rep(RHSSrcReg) != LHS.reg)) {
+ // If RHS is not defined as a copy from the LHS, we can use simpler and
+ // faster checks to see if the live ranges are coallescable. This joiner
+ // can't swap the LHS/RHS intervals though.
+ if (!MRegisterInfo::isPhysicalRegister(RHS.reg)) {
+ return SimpleJoin(LHS, RHS);
+ } else {
+ RHSValNoInfo = RHS.getValNumInfo(0);
+ }
+ } else {
+ // It was defined as a copy from the LHS, find out what value # it is.
+ unsigned ValInst = RHS.getInstForValNum(0);
+ RHSValID = LHS.getLiveRangeContaining(ValInst-1)->ValId;
+ RHSValNoInfo = LHS.getValNumInfo(RHSValID);
+ }
+
+ LHSValNoAssignments.resize(LHS.getNumValNums(), -1);
+ RHSValNoAssignments.resize(RHS.getNumValNums(), -1);
+ ValueNumberInfo.resize(LHS.getNumValNums());
+
+ // Okay, *all* of the values in LHS that are defined as a copy from RHS
+ // should now get updated.
+ for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
+ if (unsigned LHSSrcReg = LHS.getSrcRegForValNum(VN)) {
+ if (rep(LHSSrcReg) != RHS.reg) {
+ // If this is not a copy from the RHS, its value number will be
+ // unmodified by the coallescing.
+ ValueNumberInfo[VN] = LHS.getValNumInfo(VN);
+ LHSValNoAssignments[VN] = VN;
+ } else if (RHSValID == -1) {
+ // Otherwise, it is a copy from the RHS, and we don't already have a
+ // value# for it. Keep the current value number, but remember it.
+ LHSValNoAssignments[VN] = RHSValID = VN;
+ ValueNumberInfo[VN] = RHSValNoInfo;
+ } else {
+ // Otherwise, use the specified value #.
+ LHSValNoAssignments[VN] = RHSValID;
+ if (VN != (unsigned)RHSValID)
+ ValueNumberInfo[VN].first = ~1U;
+ else
+ ValueNumberInfo[VN] = RHSValNoInfo;
+ }
+ } else {
+ ValueNumberInfo[VN] = LHS.getValNumInfo(VN);
+ LHSValNoAssignments[VN] = VN;
+ }
+ }
+
+ assert(RHSValID != -1 && "Didn't find value #?");
+ RHSValNoAssignments[0] = RHSValID;
+
+ } else {
+ // Loop over the value numbers of the LHS, seeing if any are defined from
+ // the RHS.
+ SmallVector<int, 16> LHSValsDefinedFromRHS;
+ LHSValsDefinedFromRHS.resize(LHS.getNumValNums(), -1);
+ for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
+ unsigned ValSrcReg = LHS.getSrcRegForValNum(VN);
+ if (ValSrcReg == 0) // Src not defined by a copy?
+ continue;
+
+ // DstReg is known to be a register in the LHS interval. If the src is
+ // from the RHS interval, we can use its value #.
+ if (rep(ValSrcReg) != RHS.reg)
+ continue;
+
+ // Figure out the value # from the RHS.
+ unsigned ValInst = LHS.getInstForValNum(VN);
+ LHSValsDefinedFromRHS[VN] = RHS.getLiveRangeContaining(ValInst-1)->ValId;
+ }
+
+ // Loop over the value numbers of the RHS, seeing if any are defined from
+ // the LHS.
+ SmallVector<int, 16> RHSValsDefinedFromLHS;
+ RHSValsDefinedFromLHS.resize(RHS.getNumValNums(), -1);
+ for (unsigned VN = 0, e = RHS.getNumValNums(); VN != e; ++VN) {
+ unsigned ValSrcReg = RHS.getSrcRegForValNum(VN);
+ if (ValSrcReg == 0) // Src not defined by a copy?
+ continue;
+
+ // DstReg is known to be a register in the RHS interval. If the src is
+ // from the LHS interval, we can use its value #.
+ if (rep(ValSrcReg) != LHS.reg)
+ continue;
+
+ // Figure out the value # from the LHS.
+ unsigned ValInst = RHS.getInstForValNum(VN);
+ RHSValsDefinedFromLHS[VN] = LHS.getLiveRangeContaining(ValInst-1)->ValId;
+ }
+
+ LHSValNoAssignments.resize(LHS.getNumValNums(), -1);
+ RHSValNoAssignments.resize(RHS.getNumValNums(), -1);
+ ValueNumberInfo.reserve(LHS.getNumValNums() + RHS.getNumValNums());
+
+ for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
+ if (LHSValNoAssignments[VN] >= 0 || LHS.getInstForValNum(VN) == ~2U)
+ continue;
+ ComputeUltimateVN(VN, ValueNumberInfo,
+ LHSValsDefinedFromRHS, RHSValsDefinedFromLHS,
+ LHSValNoAssignments, RHSValNoAssignments, LHS, RHS);
+ }
+ for (unsigned VN = 0, e = RHS.getNumValNums(); VN != e; ++VN) {
+ if (RHSValNoAssignments[VN] >= 0 || RHS.getInstForValNum(VN) == ~2U)
+ continue;
+ // If this value number isn't a copy from the LHS, it's a new number.
+ if (RHSValsDefinedFromLHS[VN] == -1) {
+ ValueNumberInfo.push_back(RHS.getValNumInfo(VN));
+ RHSValNoAssignments[VN] = ValueNumberInfo.size()-1;
+ continue;
+ }
+
+ ComputeUltimateVN(VN, ValueNumberInfo,
+ RHSValsDefinedFromLHS, LHSValsDefinedFromRHS,
+ RHSValNoAssignments, LHSValNoAssignments, RHS, LHS);
+ }
+ }
+
+ // Armed with the mappings of LHS/RHS values to ultimate values, walk the
+ // interval lists to see if these intervals are coallescable.
+ LiveInterval::const_iterator I = LHS.begin();
+ LiveInterval::const_iterator IE = LHS.end();
+ LiveInterval::const_iterator J = RHS.begin();
+ LiveInterval::const_iterator JE = RHS.end();
+
+ // Skip ahead until the first place of potential sharing.
+ if (I->start < J->start) {
+ I = std::upper_bound(I, IE, J->start);
+ if (I != LHS.begin()) --I;
+ } else if (J->start < I->start) {
+ J = std::upper_bound(J, JE, I->start);
+ if (J != RHS.begin()) --J;
+ }
+
+ while (1) {
+ // Determine if these two live ranges overlap.
+ bool Overlaps;
+ if (I->start < J->start) {
+ Overlaps = I->end > J->start;
+ } else {
+ Overlaps = J->end > I->start;
+ }
+
+ // If so, check value # info to determine if they are really different.
+ if (Overlaps) {
+ // If the live range overlap will map to the same value number in the
+ // result liverange, we can still coallesce them. If not, we can't.
+ if (LHSValNoAssignments[I->ValId] != RHSValNoAssignments[J->ValId])
+ return false;
+ }
+
+ if (I->end < J->end) {
+ ++I;
+ if (I == IE) break;
+ } else {
+ ++J;
+ if (J == JE) break;
+ }
+ }
+
+ // If we get here, we know that we can coallesce the live ranges. Ask the
+ // intervals to coallesce themselves now.
+ LHS.join(RHS, &LHSValNoAssignments[0], &RHSValNoAssignments[0],
+ ValueNumberInfo);
+ return true;
+ }
+
+ namespace {
+ // DepthMBBCompare - Comparison predicate that sort first based on the loop
+ // depth of the basic block (the unsigned), and then on the MBB number.
+ struct DepthMBBCompare {
+ typedef std::pair<unsigned, MachineBasicBlock*> DepthMBBPair;
+ bool operator()(const DepthMBBPair &LHS, const DepthMBBPair &RHS) const {
+ if (LHS.first > RHS.first) return true; // Deeper loops first
+ return LHS.first == RHS.first &&
+ LHS.second->getNumber() < RHS.second->getNumber();
+ }
+ };
+ }
+
+ void SimpleRegisterCoalescing::CopyCoallesceInMBB(MachineBasicBlock *MBB,
+ std::vector<CopyRec> *TryAgain, bool PhysOnly) {
+ DOUT << ((Value*)MBB->getBasicBlock())->getName() << ":\n";
+
+ for (MachineBasicBlock::iterator MII = MBB->begin(), E = MBB->end();
+ MII != E;) {
+ MachineInstr *Inst = MII++;
+
+ // If this isn't a copy, we can't join intervals.
+ unsigned SrcReg, DstReg;
+ if (!tii_->isMoveInstr(*Inst, SrcReg, DstReg)) continue;
+
+ if (TryAgain && !JoinCopy(Inst, SrcReg, DstReg, PhysOnly))
+ TryAgain->push_back(getCopyRec(Inst, SrcReg, DstReg));
+ }
+ }
+
+ void SimpleRegisterCoalescing::joinIntervals() {
+ DOUT << "********** JOINING INTERVALS ***********\n";
+
+ JoinedLIs.resize(li_->getNumIntervals());
+ JoinedLIs.reset();
+
+ std::vector<CopyRec> TryAgainList;
+ const LoopInfo &LI = getAnalysis<LoopInfo>();
+ if (LI.begin() == LI.end()) {
+ // If there are no loops in the function, join intervals in function order.
+ for (MachineFunction::iterator I = mf_->begin(), E = mf_->end();
+ I != E; ++I)
+ CopyCoallesceInMBB(I, &TryAgainList);
+ } else {
+ // Otherwise, join intervals in inner loops before other intervals.
+ // Unfortunately we can't just iterate over loop hierarchy here because
+ // there may be more MBB's than BB's. Collect MBB's for sorting.
+
+ // Join intervals in the function prolog first. We want to join physical
+ // registers with virtual registers before the intervals got too long.
+ std::vector<std::pair<unsigned, MachineBasicBlock*> > MBBs;
+ for (MachineFunction::iterator I = mf_->begin(), E = mf_->end(); I != E;++I)
+ MBBs.push_back(std::make_pair(LI.getLoopDepth(I->getBasicBlock()), I));
+
+ // Sort by loop depth.
+ std::sort(MBBs.begin(), MBBs.end(), DepthMBBCompare());
+
+ // Finally, join intervals in loop nest order.
+ for (unsigned i = 0, e = MBBs.size(); i != e; ++i)
+ CopyCoallesceInMBB(MBBs[i].second, NULL, true);
+ for (unsigned i = 0, e = MBBs.size(); i != e; ++i)
+ CopyCoallesceInMBB(MBBs[i].second, &TryAgainList, false);
+ }
+
+ // Joining intervals can allow other intervals to be joined. Iteratively join
+ // until we make no progress.
+ bool ProgressMade = true;
+ while (ProgressMade) {
+ ProgressMade = false;
+
+ for (unsigned i = 0, e = TryAgainList.size(); i != e; ++i) {
+ CopyRec &TheCopy = TryAgainList[i];
+ if (TheCopy.MI &&
+ JoinCopy(TheCopy.MI, TheCopy.SrcReg, TheCopy.DstReg)) {
+ TheCopy.MI = 0; // Mark this one as done.
+ ProgressMade = true;
+ }
+ }
+ }
+
+ // Some live range has been lengthened due to colaescing, eliminate the
+ // unnecessary kills.
+ int RegNum = JoinedLIs.find_first();
+ while (RegNum != -1) {
+ unsigned Reg = RegNum + MRegisterInfo::FirstVirtualRegister;
+ unsigned repReg = rep(Reg);
+ LiveInterval &LI = li_->getInterval(repReg);
+ LiveVariables::VarInfo& svi = lv_->getVarInfo(Reg);
+ for (unsigned i = 0, e = svi.Kills.size(); i != e; ++i) {
+ MachineInstr *Kill = svi.Kills[i];
+ // Suppose vr1 = op vr2, x
+ // and vr1 and vr2 are coalesced. vr2 should still be marked kill
+ // unless it is a two-address operand.
+ if (li_->isRemoved(Kill) || hasRegisterDef(Kill, repReg))
+ continue;
+ if (LI.liveAt(li_->getInstructionIndex(Kill) + InstrSlots::NUM))
+ unsetRegisterKill(Kill, repReg);
+ }
+ RegNum = JoinedLIs.find_next(RegNum);
+ }
+
+ DOUT << "*** Register mapping ***\n";
+ for (int i = 0, e = r2rMap_.size(); i != e; ++i)
+ if (r2rMap_[i]) {
+ DOUT << " reg " << i << " -> ";
+ DEBUG(printRegName(r2rMap_[i]));
+ DOUT << "\n";
+ }
+ }
+
+ /// Return true if the two specified registers belong to different register
+ /// classes. The registers may be either phys or virt regs.
+ bool SimpleRegisterCoalescing::differingRegisterClasses(unsigned RegA,
+ unsigned RegB) const {
+
+ // Get the register classes for the first reg.
+ if (MRegisterInfo::isPhysicalRegister(RegA)) {
+ assert(MRegisterInfo::isVirtualRegister(RegB) &&
+ "Shouldn't consider two physregs!");
+ return !mf_->getSSARegMap()->getRegClass(RegB)->contains(RegA);
+ }
+
+ // Compare against the regclass for the second reg.
+ const TargetRegisterClass *RegClass = mf_->getSSARegMap()->getRegClass(RegA);
+ if (MRegisterInfo::isVirtualRegister(RegB))
+ return RegClass != mf_->getSSARegMap()->getRegClass(RegB);
+ else
+ return !RegClass->contains(RegB);
+ }
+
+ /// lastRegisterUse - Returns the last use of the specific register between
+ /// cycles Start and End. It also returns the use operand by reference. It
+ /// returns NULL if there are no uses.
+ MachineInstr *
+ SimpleRegisterCoalescing::lastRegisterUse(unsigned Start, unsigned End, unsigned Reg,
+ MachineOperand *&MOU) {
+ int e = (End-1) / InstrSlots::NUM * InstrSlots::NUM;
+ int s = Start;
+ while (e >= s) {
+ // Skip deleted instructions
+ MachineInstr *MI = li_->getInstructionFromIndex(e);
+ while ((e - InstrSlots::NUM) >= s && !MI) {
+ e -= InstrSlots::NUM;
+ MI = li_->getInstructionFromIndex(e);
+ }
+ if (e < s || MI == NULL)
+ return NULL;
+
+ for (unsigned i = 0, NumOps = MI->getNumOperands(); i != NumOps; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (MO.isReg() && MO.isUse() && MO.getReg() &&
+ mri_->regsOverlap(rep(MO.getReg()), Reg)) {
+ MOU = &MO;
+ return MI;
+ }
+ }
+
+ e -= InstrSlots::NUM;
+ }
+
+ return NULL;
+ }
+
+
+ /// findDefOperand - Returns the MachineOperand that is a def of the specific
+ /// register. It returns NULL if the def is not found.
+ MachineOperand *SimpleRegisterCoalescing::findDefOperand(MachineInstr *MI, unsigned Reg) {
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (MO.isReg() && MO.isDef() &&
+ mri_->regsOverlap(rep(MO.getReg()), Reg))
+ return &MO;
+ }
+ return NULL;
+ }
+
+ /// unsetRegisterKill - Unset IsKill property of all uses of specific register
+ /// of the specific instruction.
+ void SimpleRegisterCoalescing::unsetRegisterKill(MachineInstr *MI, unsigned Reg) {
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (MO.isReg() && MO.isUse() && MO.isKill() && MO.getReg() &&
+ mri_->regsOverlap(rep(MO.getReg()), Reg))
+ MO.unsetIsKill();
+ }
+ }
+
+ /// unsetRegisterKills - Unset IsKill property of all uses of specific register
+ /// between cycles Start and End.
+ void SimpleRegisterCoalescing::unsetRegisterKills(unsigned Start, unsigned End,
+ unsigned Reg) {
+ int e = (End-1) / InstrSlots::NUM * InstrSlots::NUM;
+ int s = Start;
+ while (e >= s) {
+ // Skip deleted instructions
+ MachineInstr *MI = li_->getInstructionFromIndex(e);
+ while ((e - InstrSlots::NUM) >= s && !MI) {
+ e -= InstrSlots::NUM;
+ MI = li_->getInstructionFromIndex(e);
+ }
+ if (e < s || MI == NULL)
+ return;
+
+ for (unsigned i = 0, NumOps = MI->getNumOperands(); i != NumOps; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (MO.isReg() && MO.isUse() && MO.isKill() && MO.getReg() &&
+ mri_->regsOverlap(rep(MO.getReg()), Reg)) {
+ MO.unsetIsKill();
+ }
+ }
+
+ e -= InstrSlots::NUM;
+ }
+ }
+
+ /// hasRegisterDef - True if the instruction defines the specific register.
+ ///
+ bool SimpleRegisterCoalescing::hasRegisterDef(MachineInstr *MI, unsigned Reg) {
+ for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
+ MachineOperand &MO = MI->getOperand(i);
+ if (MO.isReg() && MO.isDef() &&
+ mri_->regsOverlap(rep(MO.getReg()), Reg))
+ return true;
+ }
+ return false;
+ }
+
+ void SimpleRegisterCoalescing::printRegName(unsigned reg) const {
+ if (MRegisterInfo::isPhysicalRegister(reg))
+ cerr << mri_->getName(reg);
+ else
+ cerr << "%reg" << reg;
+ }
+
+ void SimpleRegisterCoalescing::releaseMemory() {
+ r2rMap_.clear();
+ JoinedLIs.clear();
+ }
+
+ static bool isZeroLengthInterval(LiveInterval *li) {
+ for (LiveInterval::Ranges::const_iterator
+ i = li->ranges.begin(), e = li->ranges.end(); i != e; ++i)
+ if (i->end - i->start > LiveIntervals::InstrSlots::NUM)
+ return false;
+ return true;
+ }
+
+ bool SimpleRegisterCoalescing::runOnMachineFunction(MachineFunction &fn) {
+ mf_ = &fn;
+ tm_ = &fn.getTarget();
+ mri_ = tm_->getRegisterInfo();
+ tii_ = tm_->getInstrInfo();
+ li_ = &getAnalysis<LiveIntervals>();
+ lv_ = &getAnalysis<LiveVariables>();
+
+ DOUT << "********** SIMPLE REGISTER COALESCING **********\n"
+ << "********** Function: "
+ << ((Value*)mf_->getFunction())->getName() << '\n';
+
+ allocatableRegs_ = mri_->getAllocatableSet(fn);
+ for (MRegisterInfo::regclass_iterator I = mri_->regclass_begin(),
+ E = mri_->regclass_end(); I != E; ++I)
+ allocatableRCRegs_.insert(std::make_pair(*I,mri_->getAllocatableSet(fn, *I)));
+
+ r2rMap_.grow(mf_->getSSARegMap()->getLastVirtReg());
+
+ // Join (coallesce) intervals if requested.
+ if (EnableJoining) {
+ joinIntervals();
+ DOUT << "********** INTERVALS POST JOINING **********\n";
+ for (LiveIntervals::iterator I = li_->begin(), E = li_->end(); I != E; ++I) {
+ I->second.print(DOUT, mri_);
+ DOUT << "\n";
+ }
+ }
+
+ // perform a final pass over the instructions and compute spill
+ // weights, coalesce virtual registers and remove identity moves.
+ const LoopInfo &loopInfo = getAnalysis<LoopInfo>();
+
+ for (MachineFunction::iterator mbbi = mf_->begin(), mbbe = mf_->end();
+ mbbi != mbbe; ++mbbi) {
+ MachineBasicBlock* mbb = mbbi;
+ unsigned loopDepth = loopInfo.getLoopDepth(mbb->getBasicBlock());
+
+ for (MachineBasicBlock::iterator mii = mbb->begin(), mie = mbb->end();
+ mii != mie; ) {
+ // if the move will be an identity move delete it
+ unsigned srcReg, dstReg, RegRep;
+ if (tii_->isMoveInstr(*mii, srcReg, dstReg) &&
+ (RegRep = rep(srcReg)) == rep(dstReg)) {
+ // remove from def list
+ LiveInterval &RegInt = li_->getOrCreateInterval(RegRep);
+ MachineOperand *MO = mii->findRegisterDefOperand(dstReg);
+ // If def of this move instruction is dead, remove its live range from
+ // the dstination register's live interval.
+ if (MO->isDead()) {
+ unsigned MoveIdx = li_->getDefIndex(li_->getInstructionIndex(mii));
+ LiveInterval::iterator MLR = RegInt.FindLiveRangeContaining(MoveIdx);
+ RegInt.removeRange(MLR->start, MoveIdx+1);
+ if (RegInt.empty())
+ li_->removeInterval(RegRep);
+ }
+ li_->RemoveMachineInstrFromMaps(mii);
+ mii = mbbi->erase(mii);
+ ++numPeep;
+ } else {
+ SmallSet<unsigned, 4> UniqueUses;
+ for (unsigned i = 0, e = mii->getNumOperands(); i != e; ++i) {
+ const MachineOperand &mop = mii->getOperand(i);
+ if (mop.isRegister() && mop.getReg() &&
+ MRegisterInfo::isVirtualRegister(mop.getReg())) {
+ // replace register with representative register
+ unsigned reg = rep(mop.getReg());
+ mii->getOperand(i).setReg(reg);
+
+ // Multiple uses of reg by the same instruction. It should not
+ // contribute to spill weight again.
+ if (UniqueUses.count(reg) != 0)
+ continue;
+ LiveInterval &RegInt = li_->getInterval(reg);
+ float w = (mop.isUse()+mop.isDef()) * powf(10.0F, (float)loopDepth);
+ // If the definition instruction is re-materializable, its spill
+ // weight is half of what it would have been normally unless it's
+ // a load from fixed stack slot.
+ int Dummy;
+ if (RegInt.remat && !tii_->isLoadFromStackSlot(RegInt.remat, Dummy))
+ w /= 2;
+ RegInt.weight += w;
+ UniqueUses.insert(reg);
+ }
+ }
+ ++mii;
+ }
+ }
+ }
+
+ for (LiveIntervals::iterator I = li_->begin(), E = li_->end(); I != E; ++I) {
+ LiveInterval &LI = I->second;
+ if (MRegisterInfo::isVirtualRegister(LI.reg)) {
+ // If the live interval length is essentially zero, i.e. in every live
+ // range the use follows def immediately, it doesn't make sense to spill
+ // it and hope it will be easier to allocate for this li.
+ if (isZeroLengthInterval(&LI))
+ LI.weight = HUGE_VALF;
+
+ // Slightly prefer live interval that has been assigned a preferred reg.
+ if (LI.preference)
+ LI.weight *= 1.01F;
+
+ // Divide the weight of the interval by its size. This encourages
+ // spilling of intervals that are large and have few uses, and
+ // discourages spilling of small intervals with many uses.
+ LI.weight /= LI.getSize();
+ }
+ }
+
+ DEBUG(dump());
+ return true;
+ }
+
+ /// print - Implement the dump method.
+ void SimpleRegisterCoalescing::print(std::ostream &O, const Module* m) const {
+ li_->print(O, m);
+ }
Index: llvm/lib/CodeGen/RegAllocLinearScan.cpp
diff -u llvm/lib/CodeGen/RegAllocLinearScan.cpp:1.149 llvm/lib/CodeGen/RegAllocLinearScan.cpp:1.150
--- llvm/lib/CodeGen/RegAllocLinearScan.cpp:1.149 Tue May 8 14:02:46 2007
+++ llvm/lib/CodeGen/RegAllocLinearScan.cpp Fri Jun 8 12:18:56 2007
@@ -96,6 +96,7 @@
virtual void getAnalysisUsage(AnalysisUsage &AU) const {
AU.addRequired<LiveIntervals>();
+ AU.addRequiredID(SimpleRegisterCoalescingID);
MachineFunctionPass::getAnalysisUsage(AU);
}
Index: llvm/lib/CodeGen/LiveIntervalAnalysis.cpp
diff -u llvm/lib/CodeGen/LiveIntervalAnalysis.cpp:1.245 llvm/lib/CodeGen/LiveIntervalAnalysis.cpp:1.246
--- llvm/lib/CodeGen/LiveIntervalAnalysis.cpp:1.245 Mon May 14 16:23:51 2007
+++ llvm/lib/CodeGen/LiveIntervalAnalysis.cpp Fri Jun 8 12:18:56 2007
@@ -39,22 +39,15 @@
STATISTIC(numIntervals, "Number of original intervals");
STATISTIC(numIntervalsAfter, "Number of intervals after coalescing");
-STATISTIC(numJoins , "Number of interval joins performed");
-STATISTIC(numPeep , "Number of identity moves eliminated after coalescing");
STATISTIC(numFolded , "Number of loads/stores folded into instructions");
-STATISTIC(numAborts , "Number of times interval joining aborted");
char LiveIntervals::ID = 0;
namespace {
RegisterPass<LiveIntervals> X("liveintervals", "Live Interval Analysis");
-
- static cl::opt<bool>
- EnableJoining("join-liveintervals",
- cl::desc("Coallesce copies (default=true)"),
- cl::init(true));
}
void LiveIntervals::getAnalysisUsage(AnalysisUsage &AU) const {
+ AU.addPreserved<LiveVariables>();
AU.addRequired<LiveVariables>();
AU.addPreservedID(PHIEliminationID);
AU.addRequiredID(PHIEliminationID);
@@ -67,20 +60,8 @@
mi2iMap_.clear();
i2miMap_.clear();
r2iMap_.clear();
- r2rMap_.clear();
- JoinedLIs.clear();
-}
-
-
-static bool isZeroLengthInterval(LiveInterval *li) {
- for (LiveInterval::Ranges::const_iterator
- i = li->ranges.begin(), e = li->ranges.end(); i != e; ++i)
- if (i->end - i->start > LiveIntervals::InstrSlots::NUM)
- return false;
- return true;
}
-
/// runOnMachineFunction - Register allocate the whole function
///
bool LiveIntervals::runOnMachineFunction(MachineFunction &fn) {
@@ -89,11 +70,7 @@
mri_ = tm_->getRegisterInfo();
tii_ = tm_->getInstrInfo();
lv_ = &getAnalysis<LiveVariables>();
- r2rMap_.grow(mf_->getSSARegMap()->getLastVirtReg());
allocatableRegs_ = mri_->getAllocatableSet(fn);
- for (MRegisterInfo::regclass_iterator I = mri_->regclass_begin(),
- E = mri_->regclass_end(); I != E; ++I)
- allocatableRCRegs_.insert(std::make_pair(*I,mri_->getAllocatableSet(fn, *I)));
// Number MachineInstrs and MachineBasicBlocks.
// Initialize MBB indexes to a sentinal.
@@ -124,99 +101,7 @@
DOUT << "\n";
}
- // Join (coallesce) intervals if requested.
- if (EnableJoining) {
- joinIntervals();
- DOUT << "********** INTERVALS POST JOINING **********\n";
- for (iterator I = begin(), E = end(); I != E; ++I) {
- I->second.print(DOUT, mri_);
- DOUT << "\n";
- }
- }
-
numIntervalsAfter += getNumIntervals();
-
- // perform a final pass over the instructions and compute spill
- // weights, coalesce virtual registers and remove identity moves.
- const LoopInfo &loopInfo = getAnalysis<LoopInfo>();
-
- for (MachineFunction::iterator mbbi = mf_->begin(), mbbe = mf_->end();
- mbbi != mbbe; ++mbbi) {
- MachineBasicBlock* mbb = mbbi;
- unsigned loopDepth = loopInfo.getLoopDepth(mbb->getBasicBlock());
-
- for (MachineBasicBlock::iterator mii = mbb->begin(), mie = mbb->end();
- mii != mie; ) {
- // if the move will be an identity move delete it
- unsigned srcReg, dstReg, RegRep;
- if (tii_->isMoveInstr(*mii, srcReg, dstReg) &&
- (RegRep = rep(srcReg)) == rep(dstReg)) {
- // remove from def list
- LiveInterval &RegInt = getOrCreateInterval(RegRep);
- MachineOperand *MO = mii->findRegisterDefOperand(dstReg);
- // If def of this move instruction is dead, remove its live range from
- // the dstination register's live interval.
- if (MO->isDead()) {
- unsigned MoveIdx = getDefIndex(getInstructionIndex(mii));
- LiveInterval::iterator MLR = RegInt.FindLiveRangeContaining(MoveIdx);
- RegInt.removeRange(MLR->start, MoveIdx+1);
- if (RegInt.empty())
- removeInterval(RegRep);
- }
- RemoveMachineInstrFromMaps(mii);
- mii = mbbi->erase(mii);
- ++numPeep;
- } else {
- SmallSet<unsigned, 4> UniqueUses;
- for (unsigned i = 0, e = mii->getNumOperands(); i != e; ++i) {
- const MachineOperand &mop = mii->getOperand(i);
- if (mop.isRegister() && mop.getReg() &&
- MRegisterInfo::isVirtualRegister(mop.getReg())) {
- // replace register with representative register
- unsigned reg = rep(mop.getReg());
- mii->getOperand(i).setReg(reg);
-
- // Multiple uses of reg by the same instruction. It should not
- // contribute to spill weight again.
- if (UniqueUses.count(reg) != 0)
- continue;
- LiveInterval &RegInt = getInterval(reg);
- float w = (mop.isUse()+mop.isDef()) * powf(10.0F, (float)loopDepth);
- // If the definition instruction is re-materializable, its spill
- // weight is half of what it would have been normally unless it's
- // a load from fixed stack slot.
- int Dummy;
- if (RegInt.remat && !tii_->isLoadFromStackSlot(RegInt.remat, Dummy))
- w /= 2;
- RegInt.weight += w;
- UniqueUses.insert(reg);
- }
- }
- ++mii;
- }
- }
- }
-
- for (iterator I = begin(), E = end(); I != E; ++I) {
- LiveInterval &LI = I->second;
- if (MRegisterInfo::isVirtualRegister(LI.reg)) {
- // If the live interval length is essentially zero, i.e. in every live
- // range the use follows def immediately, it doesn't make sense to spill
- // it and hope it will be easier to allocate for this li.
- if (isZeroLengthInterval(&LI))
- LI.weight = HUGE_VALF;
-
- // Slightly prefer live interval that has been assigned a preferred reg.
- if (LI.preference)
- LI.weight *= 1.01F;
-
- // Divide the weight of the interval by its size. This encourages
- // spilling of intervals that are large and have few uses, and
- // discourages spilling of small intervals with many uses.
- LI.weight /= LI.getSize();
- }
- }
-
DEBUG(dump());
return true;
}
@@ -240,6 +125,7 @@
}
}
+// Not called?
/// CreateNewLiveInterval - Create a new live interval with the given live
/// ranges. The new live interval will have an infinite spill weight.
LiveInterval&
@@ -268,7 +154,7 @@
for (unsigned J = 0, e = MI->getNumOperands(); J != e; ++J) {
MachineOperand &MOp = MI->getOperand(J);
- if (MOp.isRegister() && rep(MOp.getReg()) == LI->reg)
+ if (MOp.isRegister() && MOp.getReg() == LI->reg)
MOp.setReg(NewVReg);
}
}
@@ -794,944 +680,6 @@
}
}
-/// AdjustCopiesBackFrom - We found a non-trivially-coallescable copy with IntA
-/// being the source and IntB being the dest, thus this defines a value number
-/// in IntB. If the source value number (in IntA) is defined by a copy from B,
-/// see if we can merge these two pieces of B into a single value number,
-/// eliminating a copy. For example:
-///
-/// A3 = B0
-/// ...
-/// B1 = A3 <- this copy
-///
-/// In this case, B0 can be extended to where the B1 copy lives, allowing the B1
-/// value number to be replaced with B0 (which simplifies the B liveinterval).
-///
-/// This returns true if an interval was modified.
-///
-bool LiveIntervals::AdjustCopiesBackFrom(LiveInterval &IntA, LiveInterval &IntB,
- MachineInstr *CopyMI) {
- unsigned CopyIdx = getDefIndex(getInstructionIndex(CopyMI));
-
- // BValNo is a value number in B that is defined by a copy from A. 'B3' in
- // the example above.
- LiveInterval::iterator BLR = IntB.FindLiveRangeContaining(CopyIdx);
- unsigned BValNo = BLR->ValId;
-
- // Get the location that B is defined at. Two options: either this value has
- // an unknown definition point or it is defined at CopyIdx. If unknown, we
- // can't process it.
- unsigned BValNoDefIdx = IntB.getInstForValNum(BValNo);
- if (BValNoDefIdx == ~0U) return false;
- assert(BValNoDefIdx == CopyIdx &&
- "Copy doesn't define the value?");
-
- // AValNo is the value number in A that defines the copy, A0 in the example.
- LiveInterval::iterator AValLR = IntA.FindLiveRangeContaining(CopyIdx-1);
- unsigned AValNo = AValLR->ValId;
-
- // If AValNo is defined as a copy from IntB, we can potentially process this.
-
- // Get the instruction that defines this value number.
- unsigned SrcReg = IntA.getSrcRegForValNum(AValNo);
- if (!SrcReg) return false; // Not defined by a copy.
-
- // If the value number is not defined by a copy instruction, ignore it.
-
- // If the source register comes from an interval other than IntB, we can't
- // handle this.
- if (rep(SrcReg) != IntB.reg) return false;
-
- // Get the LiveRange in IntB that this value number starts with.
- unsigned AValNoInstIdx = IntA.getInstForValNum(AValNo);
- LiveInterval::iterator ValLR = IntB.FindLiveRangeContaining(AValNoInstIdx-1);
-
- // Make sure that the end of the live range is inside the same block as
- // CopyMI.
- MachineInstr *ValLREndInst = getInstructionFromIndex(ValLR->end-1);
- if (!ValLREndInst ||
- ValLREndInst->getParent() != CopyMI->getParent()) return false;
-
- // Okay, we now know that ValLR ends in the same block that the CopyMI
- // live-range starts. If there are no intervening live ranges between them in
- // IntB, we can merge them.
- if (ValLR+1 != BLR) return false;
-
- DOUT << "\nExtending: "; IntB.print(DOUT, mri_);
-
- // We are about to delete CopyMI, so need to remove it as the 'instruction
- // that defines this value #'.
- IntB.setValueNumberInfo(BValNo, std::make_pair(~0U, 0));
-
- // Okay, we can merge them. We need to insert a new liverange:
- // [ValLR.end, BLR.begin) of either value number, then we merge the
- // two value numbers.
- unsigned FillerStart = ValLR->end, FillerEnd = BLR->start;
- IntB.addRange(LiveRange(FillerStart, FillerEnd, BValNo));
-
- // If the IntB live range is assigned to a physical register, and if that
- // physreg has aliases,
- if (MRegisterInfo::isPhysicalRegister(IntB.reg)) {
- // Update the liveintervals of sub-registers.
- for (const unsigned *AS = mri_->getSubRegisters(IntB.reg); *AS; ++AS) {
- LiveInterval &AliasLI = getInterval(*AS);
- AliasLI.addRange(LiveRange(FillerStart, FillerEnd,
- AliasLI.getNextValue(~0U, 0)));
- }
- }
-
- // Okay, merge "B1" into the same value number as "B0".
- if (BValNo != ValLR->ValId)
- IntB.MergeValueNumberInto(BValNo, ValLR->ValId);
- DOUT << " result = "; IntB.print(DOUT, mri_);
- DOUT << "\n";
-
- // If the source instruction was killing the source register before the
- // merge, unset the isKill marker given the live range has been extended.
- int UIdx = ValLREndInst->findRegisterUseOperandIdx(IntB.reg, true);
- if (UIdx != -1)
- ValLREndInst->getOperand(UIdx).unsetIsKill();
-
- // Finally, delete the copy instruction.
- RemoveMachineInstrFromMaps(CopyMI);
- CopyMI->eraseFromParent();
- ++numPeep;
- return true;
-}
-
-
-/// JoinCopy - Attempt to join intervals corresponding to SrcReg/DstReg,
-/// which are the src/dst of the copy instruction CopyMI. This returns true
-/// if the copy was successfully coallesced away, or if it is never possible
-/// to coallesce this copy, due to register constraints. It returns
-/// false if it is not currently possible to coallesce this interval, but
-/// it may be possible if other things get coallesced.
-bool LiveIntervals::JoinCopy(MachineInstr *CopyMI,
- unsigned SrcReg, unsigned DstReg, bool PhysOnly) {
- DOUT << getInstructionIndex(CopyMI) << '\t' << *CopyMI;
-
- // Get representative registers.
- unsigned repSrcReg = rep(SrcReg);
- unsigned repDstReg = rep(DstReg);
-
- // If they are already joined we continue.
- if (repSrcReg == repDstReg) {
- DOUT << "\tCopy already coallesced.\n";
- return true; // Not coallescable.
- }
-
- bool SrcIsPhys = MRegisterInfo::isPhysicalRegister(repSrcReg);
- bool DstIsPhys = MRegisterInfo::isPhysicalRegister(repDstReg);
- if (PhysOnly && !SrcIsPhys && !DstIsPhys)
- // Only joining physical registers with virtual registers in this round.
- return true;
-
- // If they are both physical registers, we cannot join them.
- if (SrcIsPhys && DstIsPhys) {
- DOUT << "\tCan not coallesce physregs.\n";
- return true; // Not coallescable.
- }
-
- // We only join virtual registers with allocatable physical registers.
- if (SrcIsPhys && !allocatableRegs_[repSrcReg]) {
- DOUT << "\tSrc reg is unallocatable physreg.\n";
- return true; // Not coallescable.
- }
- if (DstIsPhys && !allocatableRegs_[repDstReg]) {
- DOUT << "\tDst reg is unallocatable physreg.\n";
- return true; // Not coallescable.
- }
-
- // If they are not of the same register class, we cannot join them.
- if (differingRegisterClasses(repSrcReg, repDstReg)) {
- DOUT << "\tSrc/Dest are different register classes.\n";
- return true; // Not coallescable.
- }
-
- LiveInterval &SrcInt = getInterval(repSrcReg);
- LiveInterval &DstInt = getInterval(repDstReg);
- assert(SrcInt.reg == repSrcReg && DstInt.reg == repDstReg &&
- "Register mapping is horribly broken!");
-
- DOUT << "\t\tInspecting "; SrcInt.print(DOUT, mri_);
- DOUT << " and "; DstInt.print(DOUT, mri_);
- DOUT << ": ";
-
- // Check if it is necessary to propagate "isDead" property before intervals
- // are joined.
- MachineOperand *mopd = CopyMI->findRegisterDefOperand(DstReg);
- bool isDead = mopd->isDead();
- bool isShorten = false;
- unsigned SrcStart = 0, RemoveStart = 0;
- unsigned SrcEnd = 0, RemoveEnd = 0;
- if (isDead) {
- unsigned CopyIdx = getInstructionIndex(CopyMI);
- LiveInterval::iterator SrcLR =
- SrcInt.FindLiveRangeContaining(getUseIndex(CopyIdx));
- RemoveStart = SrcStart = SrcLR->start;
- RemoveEnd = SrcEnd = SrcLR->end;
- // The instruction which defines the src is only truly dead if there are
- // no intermediate uses and there isn't a use beyond the copy.
- // FIXME: find the last use, mark is kill and shorten the live range.
- if (SrcEnd > getDefIndex(CopyIdx)) {
- isDead = false;
- } else {
- MachineOperand *MOU;
- MachineInstr *LastUse= lastRegisterUse(SrcStart, CopyIdx, repSrcReg, MOU);
- if (LastUse) {
- // Shorten the liveinterval to the end of last use.
- MOU->setIsKill();
- isDead = false;
- isShorten = true;
- RemoveStart = getDefIndex(getInstructionIndex(LastUse));
- RemoveEnd = SrcEnd;
- } else {
- MachineInstr *SrcMI = getInstructionFromIndex(SrcStart);
- if (SrcMI) {
- MachineOperand *mops = findDefOperand(SrcMI, repSrcReg);
- if (mops)
- // A dead def should have a single cycle interval.
- ++RemoveStart;
- }
- }
- }
- }
-
- // We need to be careful about coalescing a source physical register with a
- // virtual register. Once the coalescing is done, it cannot be broken and
- // these are not spillable! If the destination interval uses are far away,
- // think twice about coalescing them!
- if (!mopd->isDead() && (SrcIsPhys || DstIsPhys)) {
- LiveInterval &JoinVInt = SrcIsPhys ? DstInt : SrcInt;
- unsigned JoinVReg = SrcIsPhys ? repDstReg : repSrcReg;
- unsigned JoinPReg = SrcIsPhys ? repSrcReg : repDstReg;
- const TargetRegisterClass *RC = mf_->getSSARegMap()->getRegClass(JoinVReg);
- unsigned Threshold = allocatableRCRegs_[RC].count();
-
- // If the virtual register live interval is long has it has low use desity,
- // do not join them, instead mark the physical register as its allocation
- // preference.
- unsigned Length = JoinVInt.getSize() / InstrSlots::NUM;
- LiveVariables::VarInfo &vi = lv_->getVarInfo(JoinVReg);
- if (Length > Threshold &&
- (((float)vi.NumUses / Length) < (1.0 / Threshold))) {
- JoinVInt.preference = JoinPReg;
- ++numAborts;
- DOUT << "\tMay tie down a physical register, abort!\n";
- return false;
- }
- }
-
- // Okay, attempt to join these two intervals. On failure, this returns false.
- // Otherwise, if one of the intervals being joined is a physreg, this method
- // always canonicalizes DstInt to be it. The output "SrcInt" will not have
- // been modified, so we can use this information below to update aliases.
- if (JoinIntervals(DstInt, SrcInt)) {
- if (isDead) {
- // Result of the copy is dead. Propagate this property.
- if (SrcStart == 0) {
- assert(MRegisterInfo::isPhysicalRegister(repSrcReg) &&
- "Live-in must be a physical register!");
- // Live-in to the function but dead. Remove it from entry live-in set.
- // JoinIntervals may end up swapping the two intervals.
- mf_->begin()->removeLiveIn(repSrcReg);
- } else {
- MachineInstr *SrcMI = getInstructionFromIndex(SrcStart);
- if (SrcMI) {
- MachineOperand *mops = findDefOperand(SrcMI, repSrcReg);
- if (mops)
- mops->setIsDead();
- }
- }
- }
-
- if (isShorten || isDead) {
- // Shorten the live interval.
- LiveInterval &LiveInInt = (repSrcReg == DstInt.reg) ? DstInt : SrcInt;
- LiveInInt.removeRange(RemoveStart, RemoveEnd);
- }
- } else {
- // Coallescing failed.
-
- // If we can eliminate the copy without merging the live ranges, do so now.
- if (AdjustCopiesBackFrom(SrcInt, DstInt, CopyMI))
- return true;
-
- // Otherwise, we are unable to join the intervals.
- DOUT << "Interference!\n";
- return false;
- }
-
- bool Swapped = repSrcReg == DstInt.reg;
- if (Swapped)
- std::swap(repSrcReg, repDstReg);
- assert(MRegisterInfo::isVirtualRegister(repSrcReg) &&
- "LiveInterval::join didn't work right!");
-
- // If we're about to merge live ranges into a physical register live range,
- // we have to update any aliased register's live ranges to indicate that they
- // have clobbered values for this range.
- if (MRegisterInfo::isPhysicalRegister(repDstReg)) {
- // Unset unnecessary kills.
- if (!DstInt.containsOneValue()) {
- for (LiveInterval::Ranges::const_iterator I = SrcInt.begin(),
- E = SrcInt.end(); I != E; ++I)
- unsetRegisterKills(I->start, I->end, repDstReg);
- }
-
- // Update the liveintervals of sub-registers.
- for (const unsigned *AS = mri_->getSubRegisters(repDstReg); *AS; ++AS)
- getInterval(*AS).MergeInClobberRanges(SrcInt);
- } else {
- // Merge use info if the destination is a virtual register.
- LiveVariables::VarInfo& dVI = lv_->getVarInfo(repDstReg);
- LiveVariables::VarInfo& sVI = lv_->getVarInfo(repSrcReg);
- dVI.NumUses += sVI.NumUses;
- }
-
- DOUT << "\n\t\tJoined. Result = "; DstInt.print(DOUT, mri_);
- DOUT << "\n";
-
- // Remember these liveintervals have been joined.
- JoinedLIs.set(repSrcReg - MRegisterInfo::FirstVirtualRegister);
- if (MRegisterInfo::isVirtualRegister(repDstReg))
- JoinedLIs.set(repDstReg - MRegisterInfo::FirstVirtualRegister);
-
- // If the intervals were swapped by Join, swap them back so that the register
- // mapping (in the r2i map) is correct.
- if (Swapped) SrcInt.swap(DstInt);
- removeInterval(repSrcReg);
- r2rMap_[repSrcReg] = repDstReg;
-
- // Finally, delete the copy instruction.
- RemoveMachineInstrFromMaps(CopyMI);
- CopyMI->eraseFromParent();
- ++numPeep;
- ++numJoins;
- return true;
-}
-
-/// ComputeUltimateVN - Assuming we are going to join two live intervals,
-/// compute what the resultant value numbers for each value in the input two
-/// ranges will be. This is complicated by copies between the two which can
-/// and will commonly cause multiple value numbers to be merged into one.
-///
-/// VN is the value number that we're trying to resolve. InstDefiningValue
-/// keeps track of the new InstDefiningValue assignment for the result
-/// LiveInterval. ThisFromOther/OtherFromThis are sets that keep track of
-/// whether a value in this or other is a copy from the opposite set.
-/// ThisValNoAssignments/OtherValNoAssignments keep track of value #'s that have
-/// already been assigned.
-///
-/// ThisFromOther[x] - If x is defined as a copy from the other interval, this
-/// contains the value number the copy is from.
-///
-static unsigned ComputeUltimateVN(unsigned VN,
- SmallVector<std::pair<unsigned,
- unsigned>, 16> &ValueNumberInfo,
- SmallVector<int, 16> &ThisFromOther,
- SmallVector<int, 16> &OtherFromThis,
- SmallVector<int, 16> &ThisValNoAssignments,
- SmallVector<int, 16> &OtherValNoAssignments,
- LiveInterval &ThisLI, LiveInterval &OtherLI) {
- // If the VN has already been computed, just return it.
- if (ThisValNoAssignments[VN] >= 0)
- return ThisValNoAssignments[VN];
-// assert(ThisValNoAssignments[VN] != -2 && "Cyclic case?");
-
- // If this val is not a copy from the other val, then it must be a new value
- // number in the destination.
- int OtherValNo = ThisFromOther[VN];
- if (OtherValNo == -1) {
- ValueNumberInfo.push_back(ThisLI.getValNumInfo(VN));
- return ThisValNoAssignments[VN] = ValueNumberInfo.size()-1;
- }
-
- // Otherwise, this *is* a copy from the RHS. If the other side has already
- // been computed, return it.
- if (OtherValNoAssignments[OtherValNo] >= 0)
- return ThisValNoAssignments[VN] = OtherValNoAssignments[OtherValNo];
-
- // Mark this value number as currently being computed, then ask what the
- // ultimate value # of the other value is.
- ThisValNoAssignments[VN] = -2;
- unsigned UltimateVN =
- ComputeUltimateVN(OtherValNo, ValueNumberInfo,
- OtherFromThis, ThisFromOther,
- OtherValNoAssignments, ThisValNoAssignments,
- OtherLI, ThisLI);
- return ThisValNoAssignments[VN] = UltimateVN;
-}
-
-static bool InVector(unsigned Val, const SmallVector<unsigned, 8> &V) {
- return std::find(V.begin(), V.end(), Val) != V.end();
-}
-
-/// SimpleJoin - Attempt to joint the specified interval into this one. The
-/// caller of this method must guarantee that the RHS only contains a single
-/// value number and that the RHS is not defined by a copy from this
-/// interval. This returns false if the intervals are not joinable, or it
-/// joins them and returns true.
-bool LiveIntervals::SimpleJoin(LiveInterval &LHS, LiveInterval &RHS) {
- assert(RHS.containsOneValue());
-
- // Some number (potentially more than one) value numbers in the current
- // interval may be defined as copies from the RHS. Scan the overlapping
- // portions of the LHS and RHS, keeping track of this and looking for
- // overlapping live ranges that are NOT defined as copies. If these exist, we
- // cannot coallesce.
-
- LiveInterval::iterator LHSIt = LHS.begin(), LHSEnd = LHS.end();
- LiveInterval::iterator RHSIt = RHS.begin(), RHSEnd = RHS.end();
-
- if (LHSIt->start < RHSIt->start) {
- LHSIt = std::upper_bound(LHSIt, LHSEnd, RHSIt->start);
- if (LHSIt != LHS.begin()) --LHSIt;
- } else if (RHSIt->start < LHSIt->start) {
- RHSIt = std::upper_bound(RHSIt, RHSEnd, LHSIt->start);
- if (RHSIt != RHS.begin()) --RHSIt;
- }
-
- SmallVector<unsigned, 8> EliminatedLHSVals;
-
- while (1) {
- // Determine if these live intervals overlap.
- bool Overlaps = false;
- if (LHSIt->start <= RHSIt->start)
- Overlaps = LHSIt->end > RHSIt->start;
- else
- Overlaps = RHSIt->end > LHSIt->start;
-
- // If the live intervals overlap, there are two interesting cases: if the
- // LHS interval is defined by a copy from the RHS, it's ok and we record
- // that the LHS value # is the same as the RHS. If it's not, then we cannot
- // coallesce these live ranges and we bail out.
- if (Overlaps) {
- // If we haven't already recorded that this value # is safe, check it.
- if (!InVector(LHSIt->ValId, EliminatedLHSVals)) {
- // Copy from the RHS?
- unsigned SrcReg = LHS.getSrcRegForValNum(LHSIt->ValId);
- if (rep(SrcReg) != RHS.reg)
- return false; // Nope, bail out.
-
- EliminatedLHSVals.push_back(LHSIt->ValId);
- }
-
- // We know this entire LHS live range is okay, so skip it now.
- if (++LHSIt == LHSEnd) break;
- continue;
- }
-
- if (LHSIt->end < RHSIt->end) {
- if (++LHSIt == LHSEnd) break;
- } else {
- // One interesting case to check here. It's possible that we have
- // something like "X3 = Y" which defines a new value number in the LHS,
- // and is the last use of this liverange of the RHS. In this case, we
- // want to notice this copy (so that it gets coallesced away) even though
- // the live ranges don't actually overlap.
- if (LHSIt->start == RHSIt->end) {
- if (InVector(LHSIt->ValId, EliminatedLHSVals)) {
- // We already know that this value number is going to be merged in
- // if coallescing succeeds. Just skip the liverange.
- if (++LHSIt == LHSEnd) break;
- } else {
- // Otherwise, if this is a copy from the RHS, mark it as being merged
- // in.
- if (rep(LHS.getSrcRegForValNum(LHSIt->ValId)) == RHS.reg) {
- EliminatedLHSVals.push_back(LHSIt->ValId);
-
- // We know this entire LHS live range is okay, so skip it now.
- if (++LHSIt == LHSEnd) break;
- }
- }
- }
-
- if (++RHSIt == RHSEnd) break;
- }
- }
-
- // If we got here, we know that the coallescing will be successful and that
- // the value numbers in EliminatedLHSVals will all be merged together. Since
- // the most common case is that EliminatedLHSVals has a single number, we
- // optimize for it: if there is more than one value, we merge them all into
- // the lowest numbered one, then handle the interval as if we were merging
- // with one value number.
- unsigned LHSValNo;
- if (EliminatedLHSVals.size() > 1) {
- // Loop through all the equal value numbers merging them into the smallest
- // one.
- unsigned Smallest = EliminatedLHSVals[0];
- for (unsigned i = 1, e = EliminatedLHSVals.size(); i != e; ++i) {
- if (EliminatedLHSVals[i] < Smallest) {
- // Merge the current notion of the smallest into the smaller one.
- LHS.MergeValueNumberInto(Smallest, EliminatedLHSVals[i]);
- Smallest = EliminatedLHSVals[i];
- } else {
- // Merge into the smallest.
- LHS.MergeValueNumberInto(EliminatedLHSVals[i], Smallest);
- }
- }
- LHSValNo = Smallest;
- } else {
- assert(!EliminatedLHSVals.empty() && "No copies from the RHS?");
- LHSValNo = EliminatedLHSVals[0];
- }
-
- // Okay, now that there is a single LHS value number that we're merging the
- // RHS into, update the value number info for the LHS to indicate that the
- // value number is defined where the RHS value number was.
- LHS.setValueNumberInfo(LHSValNo, RHS.getValNumInfo(0));
-
- // Okay, the final step is to loop over the RHS live intervals, adding them to
- // the LHS.
- LHS.MergeRangesInAsValue(RHS, LHSValNo);
- LHS.weight += RHS.weight;
- if (RHS.preference && !LHS.preference)
- LHS.preference = RHS.preference;
-
- return true;
-}
-
-/// JoinIntervals - Attempt to join these two intervals. On failure, this
-/// returns false. Otherwise, if one of the intervals being joined is a
-/// physreg, this method always canonicalizes LHS to be it. The output
-/// "RHS" will not have been modified, so we can use this information
-/// below to update aliases.
-bool LiveIntervals::JoinIntervals(LiveInterval &LHS, LiveInterval &RHS) {
- // Compute the final value assignment, assuming that the live ranges can be
- // coallesced.
- SmallVector<int, 16> LHSValNoAssignments;
- SmallVector<int, 16> RHSValNoAssignments;
- SmallVector<std::pair<unsigned,unsigned>, 16> ValueNumberInfo;
-
- // If a live interval is a physical register, conservatively check if any
- // of its sub-registers is overlapping the live interval of the virtual
- // register. If so, do not coalesce.
- if (MRegisterInfo::isPhysicalRegister(LHS.reg) &&
- *mri_->getSubRegisters(LHS.reg)) {
- for (const unsigned* SR = mri_->getSubRegisters(LHS.reg); *SR; ++SR)
- if (hasInterval(*SR) && RHS.overlaps(getInterval(*SR))) {
- DOUT << "Interfere with sub-register ";
- DEBUG(getInterval(*SR).print(DOUT, mri_));
- return false;
- }
- } else if (MRegisterInfo::isPhysicalRegister(RHS.reg) &&
- *mri_->getSubRegisters(RHS.reg)) {
- for (const unsigned* SR = mri_->getSubRegisters(RHS.reg); *SR; ++SR)
- if (hasInterval(*SR) && LHS.overlaps(getInterval(*SR))) {
- DOUT << "Interfere with sub-register ";
- DEBUG(getInterval(*SR).print(DOUT, mri_));
- return false;
- }
- }
-
- // Compute ultimate value numbers for the LHS and RHS values.
- if (RHS.containsOneValue()) {
- // Copies from a liveinterval with a single value are simple to handle and
- // very common, handle the special case here. This is important, because
- // often RHS is small and LHS is large (e.g. a physreg).
-
- // Find out if the RHS is defined as a copy from some value in the LHS.
- int RHSValID = -1;
- std::pair<unsigned,unsigned> RHSValNoInfo;
- unsigned RHSSrcReg = RHS.getSrcRegForValNum(0);
- if ((RHSSrcReg == 0 || rep(RHSSrcReg) != LHS.reg)) {
- // If RHS is not defined as a copy from the LHS, we can use simpler and
- // faster checks to see if the live ranges are coallescable. This joiner
- // can't swap the LHS/RHS intervals though.
- if (!MRegisterInfo::isPhysicalRegister(RHS.reg)) {
- return SimpleJoin(LHS, RHS);
- } else {
- RHSValNoInfo = RHS.getValNumInfo(0);
- }
- } else {
- // It was defined as a copy from the LHS, find out what value # it is.
- unsigned ValInst = RHS.getInstForValNum(0);
- RHSValID = LHS.getLiveRangeContaining(ValInst-1)->ValId;
- RHSValNoInfo = LHS.getValNumInfo(RHSValID);
- }
-
- LHSValNoAssignments.resize(LHS.getNumValNums(), -1);
- RHSValNoAssignments.resize(RHS.getNumValNums(), -1);
- ValueNumberInfo.resize(LHS.getNumValNums());
-
- // Okay, *all* of the values in LHS that are defined as a copy from RHS
- // should now get updated.
- for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
- if (unsigned LHSSrcReg = LHS.getSrcRegForValNum(VN)) {
- if (rep(LHSSrcReg) != RHS.reg) {
- // If this is not a copy from the RHS, its value number will be
- // unmodified by the coallescing.
- ValueNumberInfo[VN] = LHS.getValNumInfo(VN);
- LHSValNoAssignments[VN] = VN;
- } else if (RHSValID == -1) {
- // Otherwise, it is a copy from the RHS, and we don't already have a
- // value# for it. Keep the current value number, but remember it.
- LHSValNoAssignments[VN] = RHSValID = VN;
- ValueNumberInfo[VN] = RHSValNoInfo;
- } else {
- // Otherwise, use the specified value #.
- LHSValNoAssignments[VN] = RHSValID;
- if (VN != (unsigned)RHSValID)
- ValueNumberInfo[VN].first = ~1U;
- else
- ValueNumberInfo[VN] = RHSValNoInfo;
- }
- } else {
- ValueNumberInfo[VN] = LHS.getValNumInfo(VN);
- LHSValNoAssignments[VN] = VN;
- }
- }
-
- assert(RHSValID != -1 && "Didn't find value #?");
- RHSValNoAssignments[0] = RHSValID;
-
- } else {
- // Loop over the value numbers of the LHS, seeing if any are defined from
- // the RHS.
- SmallVector<int, 16> LHSValsDefinedFromRHS;
- LHSValsDefinedFromRHS.resize(LHS.getNumValNums(), -1);
- for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
- unsigned ValSrcReg = LHS.getSrcRegForValNum(VN);
- if (ValSrcReg == 0) // Src not defined by a copy?
- continue;
-
- // DstReg is known to be a register in the LHS interval. If the src is
- // from the RHS interval, we can use its value #.
- if (rep(ValSrcReg) != RHS.reg)
- continue;
-
- // Figure out the value # from the RHS.
- unsigned ValInst = LHS.getInstForValNum(VN);
- LHSValsDefinedFromRHS[VN] = RHS.getLiveRangeContaining(ValInst-1)->ValId;
- }
-
- // Loop over the value numbers of the RHS, seeing if any are defined from
- // the LHS.
- SmallVector<int, 16> RHSValsDefinedFromLHS;
- RHSValsDefinedFromLHS.resize(RHS.getNumValNums(), -1);
- for (unsigned VN = 0, e = RHS.getNumValNums(); VN != e; ++VN) {
- unsigned ValSrcReg = RHS.getSrcRegForValNum(VN);
- if (ValSrcReg == 0) // Src not defined by a copy?
- continue;
-
- // DstReg is known to be a register in the RHS interval. If the src is
- // from the LHS interval, we can use its value #.
- if (rep(ValSrcReg) != LHS.reg)
- continue;
-
- // Figure out the value # from the LHS.
- unsigned ValInst = RHS.getInstForValNum(VN);
- RHSValsDefinedFromLHS[VN] = LHS.getLiveRangeContaining(ValInst-1)->ValId;
- }
-
- LHSValNoAssignments.resize(LHS.getNumValNums(), -1);
- RHSValNoAssignments.resize(RHS.getNumValNums(), -1);
- ValueNumberInfo.reserve(LHS.getNumValNums() + RHS.getNumValNums());
-
- for (unsigned VN = 0, e = LHS.getNumValNums(); VN != e; ++VN) {
- if (LHSValNoAssignments[VN] >= 0 || LHS.getInstForValNum(VN) == ~2U)
- continue;
- ComputeUltimateVN(VN, ValueNumberInfo,
- LHSValsDefinedFromRHS, RHSValsDefinedFromLHS,
- LHSValNoAssignments, RHSValNoAssignments, LHS, RHS);
- }
- for (unsigned VN = 0, e = RHS.getNumValNums(); VN != e; ++VN) {
- if (RHSValNoAssignments[VN] >= 0 || RHS.getInstForValNum(VN) == ~2U)
- continue;
- // If this value number isn't a copy from the LHS, it's a new number.
- if (RHSValsDefinedFromLHS[VN] == -1) {
- ValueNumberInfo.push_back(RHS.getValNumInfo(VN));
- RHSValNoAssignments[VN] = ValueNumberInfo.size()-1;
- continue;
- }
-
- ComputeUltimateVN(VN, ValueNumberInfo,
- RHSValsDefinedFromLHS, LHSValsDefinedFromRHS,
- RHSValNoAssignments, LHSValNoAssignments, RHS, LHS);
- }
- }
-
- // Armed with the mappings of LHS/RHS values to ultimate values, walk the
- // interval lists to see if these intervals are coallescable.
- LiveInterval::const_iterator I = LHS.begin();
- LiveInterval::const_iterator IE = LHS.end();
- LiveInterval::const_iterator J = RHS.begin();
- LiveInterval::const_iterator JE = RHS.end();
-
- // Skip ahead until the first place of potential sharing.
- if (I->start < J->start) {
- I = std::upper_bound(I, IE, J->start);
- if (I != LHS.begin()) --I;
- } else if (J->start < I->start) {
- J = std::upper_bound(J, JE, I->start);
- if (J != RHS.begin()) --J;
- }
-
- while (1) {
- // Determine if these two live ranges overlap.
- bool Overlaps;
- if (I->start < J->start) {
- Overlaps = I->end > J->start;
- } else {
- Overlaps = J->end > I->start;
- }
-
- // If so, check value # info to determine if they are really different.
- if (Overlaps) {
- // If the live range overlap will map to the same value number in the
- // result liverange, we can still coallesce them. If not, we can't.
- if (LHSValNoAssignments[I->ValId] != RHSValNoAssignments[J->ValId])
- return false;
- }
-
- if (I->end < J->end) {
- ++I;
- if (I == IE) break;
- } else {
- ++J;
- if (J == JE) break;
- }
- }
-
- // If we get here, we know that we can coallesce the live ranges. Ask the
- // intervals to coallesce themselves now.
- LHS.join(RHS, &LHSValNoAssignments[0], &RHSValNoAssignments[0],
- ValueNumberInfo);
- return true;
-}
-
-
-namespace {
- // DepthMBBCompare - Comparison predicate that sort first based on the loop
- // depth of the basic block (the unsigned), and then on the MBB number.
- struct DepthMBBCompare {
- typedef std::pair<unsigned, MachineBasicBlock*> DepthMBBPair;
- bool operator()(const DepthMBBPair &LHS, const DepthMBBPair &RHS) const {
- if (LHS.first > RHS.first) return true; // Deeper loops first
- return LHS.first == RHS.first &&
- LHS.second->getNumber() < RHS.second->getNumber();
- }
- };
-}
-
-
-void LiveIntervals::CopyCoallesceInMBB(MachineBasicBlock *MBB,
- std::vector<CopyRec> *TryAgain, bool PhysOnly) {
- DOUT << ((Value*)MBB->getBasicBlock())->getName() << ":\n";
-
- for (MachineBasicBlock::iterator MII = MBB->begin(), E = MBB->end();
- MII != E;) {
- MachineInstr *Inst = MII++;
-
- // If this isn't a copy, we can't join intervals.
- unsigned SrcReg, DstReg;
- if (!tii_->isMoveInstr(*Inst, SrcReg, DstReg)) continue;
-
- if (TryAgain && !JoinCopy(Inst, SrcReg, DstReg, PhysOnly))
- TryAgain->push_back(getCopyRec(Inst, SrcReg, DstReg));
- }
-}
-
-
-void LiveIntervals::joinIntervals() {
- DOUT << "********** JOINING INTERVALS ***********\n";
-
- JoinedLIs.resize(getNumIntervals());
- JoinedLIs.reset();
-
- std::vector<CopyRec> TryAgainList;
- const LoopInfo &LI = getAnalysis<LoopInfo>();
- if (LI.begin() == LI.end()) {
- // If there are no loops in the function, join intervals in function order.
- for (MachineFunction::iterator I = mf_->begin(), E = mf_->end();
- I != E; ++I)
- CopyCoallesceInMBB(I, &TryAgainList);
- } else {
- // Otherwise, join intervals in inner loops before other intervals.
- // Unfortunately we can't just iterate over loop hierarchy here because
- // there may be more MBB's than BB's. Collect MBB's for sorting.
-
- // Join intervals in the function prolog first. We want to join physical
- // registers with virtual registers before the intervals got too long.
- std::vector<std::pair<unsigned, MachineBasicBlock*> > MBBs;
- for (MachineFunction::iterator I = mf_->begin(), E = mf_->end(); I != E;++I)
- MBBs.push_back(std::make_pair(LI.getLoopDepth(I->getBasicBlock()), I));
-
- // Sort by loop depth.
- std::sort(MBBs.begin(), MBBs.end(), DepthMBBCompare());
-
- // Finally, join intervals in loop nest order.
- for (unsigned i = 0, e = MBBs.size(); i != e; ++i)
- CopyCoallesceInMBB(MBBs[i].second, NULL, true);
- for (unsigned i = 0, e = MBBs.size(); i != e; ++i)
- CopyCoallesceInMBB(MBBs[i].second, &TryAgainList, false);
- }
-
- // Joining intervals can allow other intervals to be joined. Iteratively join
- // until we make no progress.
- bool ProgressMade = true;
- while (ProgressMade) {
- ProgressMade = false;
-
- for (unsigned i = 0, e = TryAgainList.size(); i != e; ++i) {
- CopyRec &TheCopy = TryAgainList[i];
- if (TheCopy.MI &&
- JoinCopy(TheCopy.MI, TheCopy.SrcReg, TheCopy.DstReg)) {
- TheCopy.MI = 0; // Mark this one as done.
- ProgressMade = true;
- }
- }
- }
-
- // Some live range has been lengthened due to colaescing, eliminate the
- // unnecessary kills.
- int RegNum = JoinedLIs.find_first();
- while (RegNum != -1) {
- unsigned Reg = RegNum + MRegisterInfo::FirstVirtualRegister;
- unsigned repReg = rep(Reg);
- LiveInterval &LI = getInterval(repReg);
- LiveVariables::VarInfo& svi = lv_->getVarInfo(Reg);
- for (unsigned i = 0, e = svi.Kills.size(); i != e; ++i) {
- MachineInstr *Kill = svi.Kills[i];
- // Suppose vr1 = op vr2, x
- // and vr1 and vr2 are coalesced. vr2 should still be marked kill
- // unless it is a two-address operand.
- if (isRemoved(Kill) || hasRegisterDef(Kill, repReg))
- continue;
- if (LI.liveAt(getInstructionIndex(Kill) + InstrSlots::NUM))
- unsetRegisterKill(Kill, repReg);
- }
- RegNum = JoinedLIs.find_next(RegNum);
- }
-
- DOUT << "*** Register mapping ***\n";
- for (int i = 0, e = r2rMap_.size(); i != e; ++i)
- if (r2rMap_[i]) {
- DOUT << " reg " << i << " -> ";
- DEBUG(printRegName(r2rMap_[i]));
- DOUT << "\n";
- }
-}
-
-/// Return true if the two specified registers belong to different register
-/// classes. The registers may be either phys or virt regs.
-bool LiveIntervals::differingRegisterClasses(unsigned RegA,
- unsigned RegB) const {
-
- // Get the register classes for the first reg.
- if (MRegisterInfo::isPhysicalRegister(RegA)) {
- assert(MRegisterInfo::isVirtualRegister(RegB) &&
- "Shouldn't consider two physregs!");
- return !mf_->getSSARegMap()->getRegClass(RegB)->contains(RegA);
- }
-
- // Compare against the regclass for the second reg.
- const TargetRegisterClass *RegClass = mf_->getSSARegMap()->getRegClass(RegA);
- if (MRegisterInfo::isVirtualRegister(RegB))
- return RegClass != mf_->getSSARegMap()->getRegClass(RegB);
- else
- return !RegClass->contains(RegB);
-}
-
-/// lastRegisterUse - Returns the last use of the specific register between
-/// cycles Start and End. It also returns the use operand by reference. It
-/// returns NULL if there are no uses.
-MachineInstr *
-LiveIntervals::lastRegisterUse(unsigned Start, unsigned End, unsigned Reg,
- MachineOperand *&MOU) {
- int e = (End-1) / InstrSlots::NUM * InstrSlots::NUM;
- int s = Start;
- while (e >= s) {
- // Skip deleted instructions
- MachineInstr *MI = getInstructionFromIndex(e);
- while ((e - InstrSlots::NUM) >= s && !MI) {
- e -= InstrSlots::NUM;
- MI = getInstructionFromIndex(e);
- }
- if (e < s || MI == NULL)
- return NULL;
-
- for (unsigned i = 0, NumOps = MI->getNumOperands(); i != NumOps; ++i) {
- MachineOperand &MO = MI->getOperand(i);
- if (MO.isReg() && MO.isUse() && MO.getReg() &&
- mri_->regsOverlap(rep(MO.getReg()), Reg)) {
- MOU = &MO;
- return MI;
- }
- }
-
- e -= InstrSlots::NUM;
- }
-
- return NULL;
-}
-
-
-/// findDefOperand - Returns the MachineOperand that is a def of the specific
-/// register. It returns NULL if the def is not found.
-MachineOperand *LiveIntervals::findDefOperand(MachineInstr *MI, unsigned Reg) {
- for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand &MO = MI->getOperand(i);
- if (MO.isReg() && MO.isDef() &&
- mri_->regsOverlap(rep(MO.getReg()), Reg))
- return &MO;
- }
- return NULL;
-}
-
-/// unsetRegisterKill - Unset IsKill property of all uses of specific register
-/// of the specific instruction.
-void LiveIntervals::unsetRegisterKill(MachineInstr *MI, unsigned Reg) {
- for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand &MO = MI->getOperand(i);
- if (MO.isReg() && MO.isUse() && MO.isKill() && MO.getReg() &&
- mri_->regsOverlap(rep(MO.getReg()), Reg))
- MO.unsetIsKill();
- }
-}
-
-/// unsetRegisterKills - Unset IsKill property of all uses of specific register
-/// between cycles Start and End.
-void LiveIntervals::unsetRegisterKills(unsigned Start, unsigned End,
- unsigned Reg) {
- int e = (End-1) / InstrSlots::NUM * InstrSlots::NUM;
- int s = Start;
- while (e >= s) {
- // Skip deleted instructions
- MachineInstr *MI = getInstructionFromIndex(e);
- while ((e - InstrSlots::NUM) >= s && !MI) {
- e -= InstrSlots::NUM;
- MI = getInstructionFromIndex(e);
- }
- if (e < s || MI == NULL)
- return;
-
- for (unsigned i = 0, NumOps = MI->getNumOperands(); i != NumOps; ++i) {
- MachineOperand &MO = MI->getOperand(i);
- if (MO.isReg() && MO.isUse() && MO.isKill() && MO.getReg() &&
- mri_->regsOverlap(rep(MO.getReg()), Reg)) {
- MO.unsetIsKill();
- }
- }
-
- e -= InstrSlots::NUM;
- }
-}
-
-/// hasRegisterDef - True if the instruction defines the specific register.
-///
-bool LiveIntervals::hasRegisterDef(MachineInstr *MI, unsigned Reg) {
- for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
- MachineOperand &MO = MI->getOperand(i);
- if (MO.isReg() && MO.isDef() &&
- mri_->regsOverlap(rep(MO.getReg()), Reg))
- return true;
- }
- return false;
-}
-
LiveInterval LiveIntervals::createInterval(unsigned reg) {
float Weight = MRegisterInfo::isPhysicalRegister(reg) ?
HUGE_VALF : 0.0F;
More information about the llvm-commits
mailing list