[llvm-commits] CVS: llvm-test/External/SPEC/CFP2000/191.fma3d/Makefile
Chris Lattner
lattner at cs.uiuc.edu
Tue Jul 19 18:00:46 PDT 2005
Changes in directory llvm-test/External/SPEC/CFP2000/191.fma3d:
Makefile added (r1.1)
---
Log message:
Add info for this to compile with NAG
---
Diffs of the changes: (+75 -0)
Makefile | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 75 insertions(+)
Index: llvm-test/External/SPEC/CFP2000/191.fma3d/Makefile
diff -c /dev/null llvm-test/External/SPEC/CFP2000/191.fma3d/Makefile:1.1
*** /dev/null Tue Jul 19 20:00:45 2005
--- llvm-test/External/SPEC/CFP2000/191.fma3d/Makefile Tue Jul 19 20:00:35 2005
***************
*** 0 ****
--- 1,75 ----
+ LEVEL = ../../../..
+
+ Source = fma3d.f90 beam_.f90 include_file_.f90 penta_.f90 segment_set_.f90 \
+ body_force_.f90 indx_.f90 periodic_bc_.f90 sliding_interface_.f90 \
+ constrained_node_.f90 layering_.f90 plate_pair_.f90 sliding_node_.f90 \
+ contact_node_.f90 location_.f90 platq_.f90 spot_weld_.f90 \
+ contact_surface_.f90 lsold_.f90 platt_.f90 spring_.f90 coord_.f90 massprop_.f90 \
+ pressure_bc_.f90 spring_bc_.f90 damper_.f90 material_.f90 property_.f90 \
+ state_variables_.f90 damper_bc_.f90 mean_stress_.f90 shared_common_data.f90 \
+ stress_.f90 displacement_bc_.f90 membq_.f90 qa_record_.f90 \
+ tabulated_function_.f90 element_set_.f90 membt_.f90 relink_scratch_.f90 \
+ tetra_.f90 enumerated_sets_.f90 motion_.f90 results_.f90 tied_bc_.f90 \
+ force_.f90 nodal_point_mass_.f90 rigid_body_.f90 truss_.f90 force_bc_.f90 \
+ node_.f90 rigid_body_mass_.f90 value_.f90 gauge1d_.f90 node_set_.f90 \
+ rigid_wall_bc_.f90 velocity_ic_.f90 gauge2d_.f90 nonreflecting_bc_.f90 \
+ section_1d_.f90 gauge3d_.f90 nrbc_data_.f90 section_2d_.f90 hexah_.f90 \
+ output_.f90 segment_.f90 .f90 lsold.f90 damper.f90 spring.f90 material_00.f90 \
+ material_10.f90 material_11.f90 material_17.f90 material_22.f90 \
+ material_25.f90 material_32.f90 material_33.f90 material_34a.f90 \
+ material_36.f90 material_38.f90 material_dm.f90 material_sp.f90 .f90 sort.f90 \
+ pdb.f90 beam.f90 membq.f90 membt.f90 penta.f90 tetra.f90 hexah.f90 platq.f90 \
+ truss.f90 platt.f90 fma1.f90 getirv.f90 relink.f90 output.f90 fma2.f90 \
+ partition.f90 strain.f90 slide.f90
+
+ FP_ABSTOLERANCE=1e-7
+ FP_TOLERANCE=0.04
+
+ STDIN_FILENAME = fma3d.in
+ STDOUT_FILENAME = fma3d.out
+ NAGFORTRAN_FLAGS = -dusty -maxcontin=69
+
+
+
+ include $(LEVEL)/Makefile.FORTRAN
+ include ../../Makefile.spec2000
+ #CPPFLAGS += -DINT64='long long'
+
+
+ # Dependencies between files (due to use of modules) autogenerated by Chris' script
+ # from 'USE' directives in the source.
+
+ beam.c: $(addsuffix .c, beam_ material_ mean_stress_ motion_ node_ section_1d_ shared_common_data state_variables_)
+ damper.c: $(addsuffix .c, damper_ material_ motion_ node_ shared_common_data state_variables_)
+ fma1.c: $(addsuffix .c, beam_ body_force_ constrained_node_ contact_node_ contact_surface_ coord_ damper_ damper_bc_ displacement_bc_ element_set_ enumerated_sets_ enumerated_sets_ force_ force_bc_ gauge1d_ gauge2d_ gauge3d_ hexah_ hexah_ include_file_ indx_ layering_ location_ lsold_ massprop_ material_ mean_stress_ membq_ membq_ membt_ motion_ nodal_point_mass_ node_ node_set_ nonreflecting_bc_ nrbc_data_ output_ penta_ periodic_bc_ plate_pair_ platq_ platt_ pressure_bc_ property_ qa_record_ relink_scratch_ results_ rigid_body_ rigid_body_mass_ rigid_wall_bc_ section_1d_ section_2d_ segment_ segment_set_ shared_common_data sliding_interface_ sliding_node_ spot_weld_ spring_ spring_bc_ state_variables_ stress_ tabulated_function_ tetra_ tied_bc_ truss_ value_ velocity_ic_)
+ fma2.c: $(addsuffix .c, beam_ body_force_ constrained_node_ contact_node_ contact_surface_ coord_ damper_ damper_bc_ displacement_bc_ element_set_ enumerated_sets_ enumerated_sets_ force_ force_bc_ gauge1d_ gauge2d_ gauge3d_ hexah_ indx_ layering_ lsold_ massprop_ material_ membq_ membt_ motion_ nodal_point_mass_ node_ node_set_ nonreflecting_bc_ nrbc_data_ penta_ periodic_bc_ plate_pair_ platq_ platt_ pressure_bc_ qa_record_ results_ rigid_body_ rigid_body_mass_ rigid_wall_bc_ section_1d_ section_2d_ segment_ segment_set_ shared_common_data sliding_interface_ sliding_node_ spot_weld_ spring_ spring_bc_ state_variables_ stress_ tabulated_function_ tetra_ tied_bc_ truss_)
+ getirv.c: $(addsuffix .c, shared_common_data value_)
+ hexah.c: $(addsuffix .c, hexah_ material_ motion_ node_ shared_common_data state_variables_)
+ lsold.c: $(addsuffix .c, force_ hexah_ hexah_ hexah layering_ lsold_ material_ membq_ membq_ motion_ node_ section_2d_ shared_common_data state_variables_)
+ material_00.c: $(addsuffix .c, beam_ damper_ damper_bc_ hexah_ layering_ lsold_ material_ membq_ membt_ penta_ platq_ platt_ section_1d_ section_2d_ shared_common_data spring_ spring_bc_ state_variables_ stress_ tabulated_function_ tetra_ truss_)
+ material_10.c: $(addsuffix .c, layering_ material_ section_1d_ section_2d_ shared_common_data state_variables_)
+ material_11.c: $(addsuffix .c, layering_ material_ section_1d_ section_2d_ shared_common_data state_variables_)
+ material_17.c: $(addsuffix .c, layering_ material_ section_1d_ section_2d_ shared_common_data state_variables_)
+ material_22.c: $(addsuffix .c, material_ section_2d_ shared_common_data state_variables_)
+ material_25.c: $(addsuffix .c, layering_ material_ section_1d_ section_2d_ shared_common_data state_variables_)
+ material_32.c: $(addsuffix .c, layering_ material_ shared_common_data state_variables_)
+ material_33.c: $(addsuffix .c, layering_ material_ shared_common_data state_variables_)
+ material_34a.c: $(addsuffix .c, layering_ material_ shared_common_data state_variables_)
+ material_36.c: $(addsuffix .c, layering_ material_ shared_common_data state_variables_)
+ material_38.c: $(addsuffix .c, layering_ material_ shared_common_data state_variables_ tabulated_function_)
+ material_dm.c: $(addsuffix .c, material_ section_1d_ shared_common_data state_variables_)
+ material_sp.c: $(addsuffix .c, material_ section_1d_ shared_common_data state_variables_)
+ membq.c: $(addsuffix .c, material_ membq_ motion_ node_ section_2d_ shared_common_data state_variables_)
+ membt.c: $(addsuffix .c, material_ membt_ motion_ node_ section_2d_ shared_common_data state_variables_)
+ output.c: $(addsuffix .c, beam_ body_force_ constrained_node_ contact_node_ contact_surface_ coord_ damper_ damper_bc_ displacement_bc_ element_set_ enumerated_sets_ force_ force_bc_ gauge1d_ gauge2d_ gauge3d_ hexah_ include_file_ indx_ layering_ lsold_ massprop_ material_ membq_ membt_ motion_ nodal_point_mass_ node_ node_set_ nonreflecting_bc_ nrbc_data_ penta_ periodic_bc_ plate_pair_ platq_ platt_ pressure_bc_ property_ qa_record_ results_ rigid_body_ rigid_body_mass_ rigid_wall_bc_ section_1d_ section_2d_ segment_ segment_set_ shared_common_data sliding_interface_ sliding_node_ spot_weld_ spring_ spring_bc_ state_variables_ stress_ tabulated_function_ tetra_ tied_bc_ truss_)
+ partition.c: $(addsuffix .c, beam_ constrained_node_ contact_node_ damper_ damper_bc_ displacement_bc_ enumerated_sets_ hexah_ lsold_ membq_ membt_ node_ node_set_ nonreflecting_bc_ penta_ periodic_bc_ platq_ platt_ rigid_body_ rigid_wall_bc_ segment_ shared_common_data spot_weld_ spring_ spring_bc_ tetra_ tied_bc_ truss_)
+ pdb.c: $(addsuffix .c, beam_ body_force_ constrained_node_ contact_node_ contact_surface_ coord_ damper_ damper_bc_ displacement_bc_ element_set_ enumerated_sets_ force_ force_bc_ gauge1d_ gauge2d_ gauge3d_ hexah_ indx_ layering_ lsold_ massprop_ material_ membq_ membt_ motion_ nodal_point_mass_ node_ node_set_ nonreflecting_bc_ nrbc_data_ penta_ periodic_bc_ plate_pair_ platq_ platt_ pressure_bc_ qa_record_ results_ rigid_body_ rigid_body_mass_ rigid_wall_bc_ section_1d_ section_2d_ segment_ segment_set_ shared_common_data sliding_interface_ sliding_node_ spot_weld_ spring_ spring_bc_ state_variables_ stress_ tabulated_function_ tetra_ tied_bc_ truss_)
+ penta.c: $(addsuffix .c, material_ motion_ node_ penta_ shared_common_data state_variables_)
+ platq.c: $(addsuffix .c, material_ motion_ node_ platq_ section_2d_ shared_common_data state_variables_ stress_ tabulated_function_)
+ platt.c: $(addsuffix .c, material_ motion_ node_ platt_ section_2d_ shared_common_data state_variables_ stress_ tabulated_function_)
+ relink.c: $(addsuffix .c, beam_ body_force_ constrained_node_ damper_ damper_bc_ displacement_bc_ element_set_ enumerated_sets_ force_ force_bc_ gauge1d_ gauge2d_ gauge3d_ hexah_ layering_ lsold_ massprop_ material_ membq_ membt_ motion_ nodal_point_mass_ node_ node_set_ nonreflecting_bc_ output_ penta_ periodic_bc_ plate_pair_ platq_ platt_ pressure_bc_ qa_record_ relink_scratch_ results_ rigid_body_ rigid_body_mass_ rigid_wall_bc_ section_1d_ section_2d_ segment_ segment_set_ shared_common_data sliding_interface_ spot_weld_ spring_ spring_bc_ tabulated_function_ tetra_ tied_bc_ truss_ velocity_ic_)
+ slide.c: $(addsuffix .c, contact_node_ contact_surface_ coord_ force_ indx_ motion_ node_ shared_common_data sliding_interface_ sliding_node_)
+ spring.c: $(addsuffix .c, material_ motion_ node_ shared_common_data spring_ state_variables_)
+ strain.c: $(addsuffix .c, beam_ gauge1d_ gauge2d_ gauge3d_ hexah_ lsold_ membq_ membt_ motion_ node_ penta_ platq_ platt_ section_1d_ section_2d_ shared_common_data tetra_ truss_)
+ tetra.c: $(addsuffix .c, material_ motion_ node_ shared_common_data state_variables_ tetra_)
+ truss.c: $(addsuffix .c, material_ motion_ node_ section_1d_ shared_common_data state_variables_ truss_)
More information about the llvm-commits
mailing list