[llvm-commits] CVS: llvm/tools/lli/Makefile.in

Reid Spencer reid at x10sys.com
Mon Oct 18 16:56:45 PDT 2004



Changes in directory llvm/tools/lli:

Makefile.in added (r1.1)
---
Log message:

Initial automake generated Makefile template

---
Diffs of the changes:  (+680 -0)

Index: llvm/tools/lli/Makefile.in
diff -c /dev/null llvm/tools/lli/Makefile.in:1.1
*** /dev/null	Mon Oct 18 18:55:50 2004
--- llvm/tools/lli/Makefile.in	Mon Oct 18 18:55:40 2004
***************
*** 0 ****
--- 1,680 ----
+ # Makefile.in generated by automake 1.9.2 from Makefile.am.
+ # @configure_input@
+ 
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+ # 2003, 2004  Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+ 
+ # This program is distributed in the hope that it will be useful,
+ # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+ 
+ @SET_MAKE@
+ 
+ #===-- tools/lli/Makefile.am -------------------------------*- Makefile -*--===#
+ #
+ #                     The LLVM Compiler Infrastructure
+ #
+ # This file was developed by Reid Spencer and is distributed under the 
+ # University of Illinois Open Source License. See LICENSE.TXT for details.
+ # 
+ #===------------------------------------------------------------------------===#
+ 
+ #,===-- Makefile.rules.am - Common make rules for LLVM ------*- Makefile -*--===#
+ #
+ #                     The LLVM Compiler Infrastructure
+ #
+ # This file was developed by Reid Spencer and is distributed under the 
+ # University of Illinois Open Source License. See LICENSE.TXT for details.
+ # 
+ #===------------------------------------------------------------------------===#
+ 
+ SOURCES = $(lli_SOURCES)
+ 
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+ top_builddir = ../..
+ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ install_sh_DATA = $(install_sh) -c -m 644
+ install_sh_PROGRAM = $(install_sh) -c
+ install_sh_SCRIPT = $(install_sh) -c
+ INSTALL_HEADER = $(INSTALL_DATA)
+ transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+ build_triplet = @build@
+ host_triplet = @host@
+ target_triplet = @target@
+ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ 	$(top_srcdir)/Makefile_config
+ bin_PROGRAMS = lli$(EXEEXT)
+ subdir = tools/lli
+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+ am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ 	$(ACLOCAL_M4)
+ mkinstalldirs = $(SHELL) $(top_srcdir)/autoconf/mkinstalldirs
+ CONFIG_HEADER = $(top_builddir)/include/llvm/Config/config.h \
+ 	$(top_builddir)/include/llvm/Support/DataTypes.h \
+ 	$(top_builddir)/include/llvm/ADT/hash_map \
+ 	$(top_builddir)/include/llvm/ADT/hash_set \
+ 	$(top_builddir)/include/llvm/Support/ThreadSupport.h \
+ 	$(top_builddir)/include/llvm/ADT/iterator
+ CONFIG_CLEAN_FILES =
+ am__installdirs = "$(DESTDIR)$(bindir)"
+ binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+ PROGRAMS = $(bin_PROGRAMS)
+ am_lli_OBJECTS = lli.$(OBJEXT)
+ lli_OBJECTS = $(am_lli_OBJECTS)
+ lli_DEPENDENCIES = $(call GETOBJS,Interpreter,$(THEOBJS)) $(call \
+ 	GETLIBS,$(THELIBS)) $(call GETOBJS,ScalarOpts) $(call \
+ 	GETLIBS,Analysis,TransformUtils,Target) $(call \
+ 	GETOBJS,BCReader,Core) $(call GETLIBS,Support,System)
+ DEFAULT_INCLUDES = 
+ depcomp = $(SHELL) $(top_srcdir)/autoconf/depcomp
+ am__depfiles_maybe = depfiles
+ CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+ LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \
+ 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ 	$(AM_CXXFLAGS) $(CXXFLAGS)
+ CXXLD = $(CXX)
+ CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \
+ 	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+ SOURCES = $(lli_SOURCES)
+ DIST_SOURCES = $(lli_SOURCES)
+ CTAGS = ctags
+ DEJATOOL = $(PACKAGE)
+ RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
+ EXPECT = expect
+ RUNTEST = runtest
+ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ INSTALL = @INSTALL@
+ ACLOCAL = @ACLOCAL@
+ ALLOCA = @ALLOCA@
+ AMDEP_FALSE = @AMDEP_FALSE@
+ AMDEP_TRUE = @AMDEP_TRUE@
+ AMTAR = @AMTAR@
+ AR = @AR@
+ 
+ # Target hardware architecture
+ ARCH = @ARCH@
+ ARCH_PPC_FALSE = @ARCH_PPC_FALSE@
+ ARCH_PPC_TRUE = @ARCH_PPC_TRUE@
+ ARCH_SPARC_FALSE = @ARCH_SPARC_FALSE@
+ ARCH_SPARC_TRUE = @ARCH_SPARC_TRUE@
+ ARCH_UNKNOWN_FALSE = @ARCH_UNKNOWN_FALSE@
+ ARCH_UNKNOWN_TRUE = @ARCH_UNKNOWN_TRUE@
+ ARCH_X86_FALSE = @ARCH_X86_FALSE@
+ ARCH_X86_TRUE = @ARCH_X86_TRUE@
+ AUTOCONF = @AUTOCONF@
+ AUTOHEADER = @AUTOHEADER@
+ AUTOMAKE = @AUTOMAKE@
+ AWK = @AWK@
+ BISON = @BISON@
+ BUILDMODE := @BUILDMODE@
+ 
+ # Path to the CC binary, which use used by testcases for native builds.
+ CC := @CC@
+ CCDEPMODE = @CCDEPMODE@
+ CFLAGS = @CFLAGS@
+ CPP = @CPP@
+ CPPFLAGS = @CPPFLAGS@ -DENABLE_X86_JIT
+ 
+ # Path to the C++ compiler to use.  This is an optional setting, which defaults
+ # to whatever your gmake defaults to.
+ CXX = @CXX@
+ CXXCPP = @CXXCPP@
+ CXXDEPMODE = @CXXDEPMODE@
+ CXXFLAGS = @CXXFLAGS@
+ CYGPATH_W = @CYGPATH_W@
+ DEFS = @DEFS@
+ DEPDIR = @DEPDIR@
+ DOT = @DOT@
+ ECHO = echo
+ ECHO_C = @ECHO_C@
+ ECHO_N = @ECHO_N@
+ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ ENABLE_OPTIMIZED = @ENABLE_OPTIMIZED@
+ ENABLE_PROFILED = @ENABLE_PROFILED@
+ 
+ # Endian-ness of the target
+ ENDIAN = @ENDIAN@
+ ETAGS = @ETAGS@
+ ETAGSFLAGS = @ETAGSFLAGS@
+ 
+ # Executable file extension for this platform.
+ EXEEXT = @EXEEXT@
+ F77 = @F77@
+ FFLAGS = @FFLAGS@
+ FLEX = @LEX@
+ HAVE_BZIP2 = @HAVE_BZIP2@
+ HAVE_ZLIB = @HAVE_ZLIB@
+ INSTALL_DATA = @INSTALL_DATA@
+ INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ INSTALL_SCRIPT = @INSTALL_SCRIPT@
+ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ JIT = @JIT@
+ 
+ # Linker flags.
+ LDFLAGS = @LDFLAGS@ @LDFLAGS@
+ LEX = @LEX@
+ LEXLIB = @LEXLIB@
+ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+ LIBOBJS = @LIBOBJS@
+ LIBS = @LIBS@
+ LIBTOOL = @LIBTOOL@
+ LLVMCC1 = @LLVMCC1@
+ LLVMCC1PLUS = @LLVMCC1PLUS@
+ 
+ # Path to location for LLVM C/C++ front-end. You can modify this if you
+ # want to override the value set by configure.
+ LLVMGCCDIR := @LLVMGCCDIR@
+ LLVM_BINDIR := @LLVM_BINDIR@
+ LLVM_CONFIGTIME = @LLVM_CONFIGTIME@
+ LLVM_DATADIR := @LLVM_DATADIR@
+ LLVM_DOCSDIR := @LLVM_DOCSDIR@
+ LLVM_ETCDIR := @LLVM_ETCDIR@
+ LLVM_INCLUDEDIR := @LLVM_INCLUDEDIR@ 
+ LLVM_INFODIR := @LLVM_INFODIR@
+ LLVM_LIBDIR := @LLVM_LIBDIR@
+ LLVM_MANDIR := @LLVM_MANDIR@
+ 
+ # Autoconf configured values
+ LLVM_PREFIX := @LLVM_PREFIX@
+ LN_S = @LN_S@
+ LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+ MMAP_FILE = @MMAP_FILE@
+ OBJEXT = @OBJEXT@
+ 
+ # Target operating system for which LLVM will be compiled.
+ OS = @OS@
+ PACKAGE = @PACKAGE@
+ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+ PACKAGE_NAME = @PACKAGE_NAME@
+ PACKAGE_STRING = @PACKAGE_STRING@
+ PACKAGE_TARNAME = @PACKAGE_TARNAME@
+ PACKAGE_VERSION = @PACKAGE_VERSION@
+ PATH_SEPARATOR = @PATH_SEPARATOR@
+ 
+ # Path to the Python interpreter
+ PYTHON := @PYTHON@
+ QMTEST = @QMTEST@
+ RANLIB = @RANLIB@
+ SET_MAKE = @SET_MAKE@
+ SHELL = @SHELL@
+ 
+ # Shared library extension for this platform.
+ SHLIBEXT = @SHLIBEXT@
+ STRIP = @STRIP@
+ VERSION = @VERSION@
+ 
+ # The pathnames of the Flex and Bison programs, respectively.
+ YACC = @YACC@
+ ac_ct_AR = @ac_ct_AR@
+ ac_ct_CC = @ac_ct_CC@
+ ac_ct_CXX = @ac_ct_CXX@
+ ac_ct_F77 = @ac_ct_F77@
+ ac_ct_RANLIB = @ac_ct_RANLIB@
+ ac_ct_STRIP = @ac_ct_STRIP@
+ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+ am__include = @am__include@
+ am__leading_dot = @am__leading_dot@
+ am__quote = @am__quote@
+ am__tar = @am__tar@
+ am__untar = @am__untar@
+ bindir = @bindir@
+ build = @build@
+ build_alias = @build_alias@
+ build_cpu = @build_cpu@
+ build_os = @build_os@
+ build_vendor = @build_vendor@
+ datadir = @datadir@
+ exec_prefix = @exec_prefix@
+ host = @host@
+ host_alias = @host_alias@
+ host_cpu = @host_cpu@
+ host_os = @host_os@
+ host_vendor = @host_vendor@
+ ifGNUmake = @ifGNUmake@
+ includedir = @includedir@
+ infodir = @infodir@
+ install_sh = @install_sh@
+ libdir = @libdir@
+ libexecdir = @libexecdir@
+ localstatedir = @localstatedir@
+ mandir = @mandir@
+ mkdir_p = @mkdir_p@
+ oldincludedir = @oldincludedir@
+ prefix = @prefix@
+ program_transform_name = @program_transform_name@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+ subdirs = @subdirs@
+ sysconfdir = @sysconfdir@
+ target = @target@
+ target_alias = @target_alias@
+ target_cpu = @target_cpu@
+ target_os = @target_os@
+ target_vendor = @target_vendor@
+ 
+ # Options for all automake makefiles
+ ACLOCAL_AMFLAGS = -I autoconf -I autoconf/m4 --output=autoconf/aclocal.m4
+ AUTOMAKE_OPTIONS = foreign dejagnu dist-zip nostdinc
+ 
+ # Libraries needed by tools
+ TOOLLINKOPTS = @LIBS@
+ 
+ # Path to the library archiver program.
+ AR_PATH = @AR@
+ 
+ # Paths to miscellaneous programs.
+ RPWD = pwd
+ SED = sed
+ RM = rm
+ CP = cp
+ LN = ln
+ CMP = cmp
+ MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
+ DATE = date
+ MV = mv
+ VERB := @
+ IGNORE := true
+ 
+ # Determine the target for which LLVM should generate code.
+ LLVMGCCARCH := @target@/3.4-llvm
+ 
+ # Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+ LCC1 = @LLVMCC1@
+ LCC1XX = @LLVMCC1PLUS@
+ 
+ # Path to directory where object files should be stored during a build.
+ # Set OBJ_ROOT to "." if you do not want to use a separate place for
+ # object files.
+ OBJ_ROOT := .
+ lli_SOURCES = lli.cpp
+ THEOBJS = JIT CodeGen ExecutionEngine X86 SelectionDAG
+ THELIBS = 
+ 
+ # You can enable the X86 JIT on a non-X86 host by setting the flag
+ # ENABLE_X86_JIT on the make command line. If not, it will still be
+ # enabled automagically on an X86 host.
+ @ARCH_X86_TRUE at ENABLE_X86_JIT = 1
+ 
+ # You can enable the Sparc JIT on a non-Sparc host by setting the flag
+ # ENABLE_SPARC_JIT on the make command line. If not, it will still be
+ # enabled automagically on an Sparc host.
+ @ARCH_SPARC_TRUE at ENABLE_SPARC_JIT = 1
+ lli_LDADD = \
+   $(call GETOBJS,Interpreter,$(THEOBJS)) \
+   $(call GETLIBS,$(THELIBS)) \
+   $(call GETOBJS,ScalarOpts) \
+   $(call GETLIBS,Analysis,TransformUtils,Target) \
+   $(call GETOBJS,BCReader,Core) \
+   $(call GETLIBS,Support,System)
+ 
+ all: all-am
+ 
+ .SUFFIXES:
+ .SUFFIXES: .cpp .lo .o .obj
+ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makefile_config $(am__configure_deps)
+ 	@for dep in $?; do \
+ 	  case '$(am__configure_deps)' in \
+ 	    *$$dep*) \
+ 	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ 		&& exit 0; \
+ 	      exit 1;; \
+ 	  esac; \
+ 	done; \
+ 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tools/lli/Makefile'; \
+ 	cd $(top_srcdir) && \
+ 	  $(AUTOMAKE) --foreign  tools/lli/Makefile
+ .PRECIOUS: Makefile
+ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ 	@case '$?' in \
+ 	  *config.status*) \
+ 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ 	  *) \
+ 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ 	esac;
+ 
+ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+ 
+ $(top_srcdir)/configure:  $(am__configure_deps)
+ 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+ 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+ install-binPROGRAMS: $(bin_PROGRAMS)
+ 	@$(NORMAL_INSTALL)
+ 	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+ 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+ 	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ 	  if test -f $$p \
+ 	     || test -f $$p1 \
+ 	  ; then \
+ 	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ 	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+ 	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+ 	  else :; fi; \
+ 	done
+ 
+ uninstall-binPROGRAMS:
+ 	@$(NORMAL_UNINSTALL)
+ 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+ 	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ 	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+ 	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ 	done
+ 
+ clean-binPROGRAMS:
+ 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+ 	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ 	  echo " rm -f $$p $$f"; \
+ 	  rm -f $$p $$f ; \
+ 	done
+ lli$(EXEEXT): $(lli_OBJECTS) $(lli_DEPENDENCIES) 
+ 	@rm -f lli$(EXEEXT)
+ 	$(CXXLINK) $(lli_LDFLAGS) $(lli_OBJECTS) $(lli_LDADD) $(LIBS)
+ 
+ mostlyclean-compile:
+ 	-rm -f *.$(OBJEXT)
+ 
+ distclean-compile:
+ 	-rm -f *.tab.c
+ 
+ @AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lli.Po at am__quote@
+ 
+ .cpp.o:
+ @am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ @am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
+ 
+ .cpp.obj:
+ @am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+ @am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+ 
+ .cpp.lo:
+ @am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+ @am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
+ 
+ mostlyclean-libtool:
+ 	-rm -f *.lo
+ 
+ clean-libtool:
+ 	-rm -rf .libs _libs
+ 
+ distclean-libtool:
+ 	-rm -f libtool
+ uninstall-info-am:
+ 
+ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+ 	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+ 	mkid -fID $$unique
+ tags: TAGS
+ 
+ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
+ 	tags=; \
+ 	here=`pwd`; \
+ 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+ 	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+ 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ 	  test -n "$$unique" || unique=$$empty_fix; \
+ 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ 	    $$tags $$unique; \
+ 	fi
+ ctags: CTAGS
+ CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
+ 	tags=; \
+ 	here=`pwd`; \
+ 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+ 	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+ 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ 	     $$tags $$unique
+ 
+ GTAGS:
+ 	here=`$(am__cd) $(top_builddir) && pwd` \
+ 	  && cd $(top_srcdir) \
+ 	  && gtags -i $(GTAGS_ARGS) $$here
+ 
+ distclean-tags:
+ 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ 
+ check-DEJAGNU: site.exp
+ 	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
+ 	EXPECT=$(EXPECT); export EXPECT; \
+ 	runtest=$(RUNTEST); \
+ 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ 	  l='$(DEJATOOL)'; for tool in $$l; do \
+ 	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
+ 	  done; \
+ 	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
+ 	fi
+ site.exp: Makefile
+ 	@echo 'Making a new site.exp file...'
+ 	@echo '## these variables are automatically generated by make ##' >site.tmp
+ 	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
+ 	@echo '# edit the last section' >>site.tmp
+ 	@echo 'set srcdir $(srcdir)' >>site.tmp
+ 	@echo "set objdir `pwd`" >>site.tmp
+ 	@echo 'set build_alias "$(build_alias)"' >>site.tmp
+ 	@echo 'set build_triplet $(build_triplet)' >>site.tmp
+ 	@echo 'set host_alias "$(host_alias)"' >>site.tmp
+ 	@echo 'set host_triplet $(host_triplet)' >>site.tmp
+ 	@echo 'set target_alias "$(target_alias)"' >>site.tmp
+ 	@echo 'set target_triplet $(target_triplet)' >>site.tmp
+ 	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
+ 	@test ! -f site.exp || \
+ 	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
+ 	@-rm -f site.bak
+ 	@test ! -f site.exp || mv site.exp site.bak
+ 	@mv site.tmp site.exp
+ 
+ distclean-DEJAGNU:
+ 	-rm -f site.exp site.bak
+ 	-l='$(DEJATOOL)'; for tool in $$l; do \
+ 	  rm -f $$tool.sum $$tool.log; \
+ 	done
+ 
+ distdir: $(DISTFILES)
+ 	$(mkdir_p) $(distdir)/../..
+ 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ 	list='$(DISTFILES)'; for file in $$list; do \
+ 	  case $$file in \
+ 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ 	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ 	  esac; \
+ 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ 	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ 	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ 	    dir="/$$dir"; \
+ 	    $(mkdir_p) "$(distdir)$$dir"; \
+ 	  else \
+ 	    dir=''; \
+ 	  fi; \
+ 	  if test -d $$d/$$file; then \
+ 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ 	    fi; \
+ 	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ 	  else \
+ 	    test -f $(distdir)/$$file \
+ 	    || cp -p $$d/$$file $(distdir)/$$file \
+ 	    || exit 1; \
+ 	  fi; \
+ 	done
+ check-am: all-am
+ 	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
+ check: check-am
+ all-am: Makefile $(PROGRAMS)
+ installdirs:
+ 	for dir in "$(DESTDIR)$(bindir)"; do \
+ 	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ 	done
+ install: install-am
+ install-exec: install-exec-am
+ install-data: install-data-am
+ uninstall: uninstall-am
+ 
+ install-am: all-am
+ 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+ 
+ installcheck: installcheck-am
+ install-strip:
+ 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ 	  `test -z '$(STRIP)' || \
+ 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+ 
+ clean-generic:
+ 
+ distclean-generic:
+ 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ 
+ maintainer-clean-generic:
+ 	@echo "This command is intended for maintainers to use"
+ 	@echo "it deletes files that may require special tools to rebuild."
+ clean: clean-am
+ 
+ clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+ 
+ distclean: distclean-am
+ 	-rm -rf ./$(DEPDIR)
+ 	-rm -f Makefile
+ distclean-am: clean-am distclean-DEJAGNU distclean-compile \
+ 	distclean-generic distclean-libtool distclean-tags
+ 
+ dvi: dvi-am
+ 
+ dvi-am:
+ 
+ html: html-am
+ 
+ info: info-am
+ 
+ info-am:
+ 
+ install-data-am:
+ 
+ install-exec-am: install-binPROGRAMS
+ 
+ install-info: install-info-am
+ 
+ install-man:
+ 
+ installcheck-am:
+ 
+ maintainer-clean: maintainer-clean-am
+ 	-rm -rf ./$(DEPDIR)
+ 	-rm -f Makefile
+ maintainer-clean-am: distclean-am maintainer-clean-generic
+ 
+ mostlyclean: mostlyclean-am
+ 
+ mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ 	mostlyclean-libtool
+ 
+ pdf: pdf-am
+ 
+ pdf-am:
+ 
+ ps: ps-am
+ 
+ ps-am:
+ 
+ uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+ 
+ .PHONY: CTAGS GTAGS all all-am check check-DEJAGNU check-am clean \
+ 	clean-binPROGRAMS clean-generic clean-libtool ctags distclean \
+ 	distclean-DEJAGNU distclean-compile distclean-generic \
+ 	distclean-libtool distclean-tags distdir dvi dvi-am html \
+ 	html-am info info-am install install-am install-binPROGRAMS \
+ 	install-data install-data-am install-exec install-exec-am \
+ 	install-info install-info-am install-man install-strip \
+ 	installcheck installcheck-am installdirs maintainer-clean \
+ 	maintainer-clean-generic mostlyclean mostlyclean-compile \
+ 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ 	tags uninstall uninstall-am uninstall-binPROGRAMS \
+ 	uninstall-info-am
+ 
+ 
+ # These are options that can either be enabled here, or can be enabled on the
+ # make command line (ie, make ENABLE_PROFILING=1):
+ 
+ # When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
+ # turned on, and Debug builds are turned off.
+ #ENABLE_OPTIMIZED = 1
+ 
+ # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
+ # information to allow gprof to be used to get execution frequencies.
+ #ENABLE_PROFILING = 1
+ 
+ # This option tells the Makefiles to produce verbose output.
+ # It essentially prints the commands that make is executing
+ #VERBOSE = 1
+ 
+ # Include the rules.
+ # WARNING NOTE WARNING NOTE WARNING NOTE WARNING NOTE
+ # The inclusion of Makefile_rules MUST be done such that there is a space
+ # before "include". This prevents automake from processing the file and
+ # simply passes the inclusion on to GNU Make. The rules in Makefile_rules
+ # depend on this. DO NOT REMOVE THE SPACE BEFORE "include"
+  include $(top_srcdir)/Makefile_rules
+ 
+ # What the X86 JIT requires
+  ifdef ENABLE_X86_JIT
+  endif
+ 
+ # What the Sparc JIT requires
+  ifdef ENABLE_SPARC_JIT
+ #  CPPFLAGS += -DENABLE_SPARC_JIT
+ #  THEOBJS  += SparcV9 SparcV9InstrSched SparcV9LiveVar SparcV9RegAlloc 
+ #  THEOBJS  += ProfilePaths BCWriter
+ #  THELIBS  += Instrument Transforms IPO IPA DataStructure
+  endif
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT:






More information about the llvm-commits mailing list