[llvm-commits] CVS: llvm/Makefile.config.in
Brian Gaeke
gaeke at cs.uiuc.edu
Fri Jan 16 15:32:20 PST 2004
Changes in directory llvm:
Makefile.config.in updated: 1.15 -> 1.16
---
Log message:
Remove some whitespace and fix up some comments.
Take settings of LCC and LCC1XX from configure.
---
Diffs of the changes: (+9 -69)
Index: llvm/Makefile.config.in
diff -u llvm/Makefile.config.in:1.15 llvm/Makefile.config.in:1.16
--- llvm/Makefile.config.in:1.15 Tue Jan 13 00:43:14 2004
+++ llvm/Makefile.config.in Fri Jan 16 15:31:34 2004
@@ -2,16 +2,13 @@
#
# This file is included by Makefile.common. It defines paths and other
# values specific to a particular installation of LLVM.
+#
#===-----------------------------------------------------------------------====
-#
# Target operating system for which LLVM will be compiled.
-#
OS=@OS@
-#
# Target hardware architecture
-#
ARCH=@ARCH@
# Path to the C++ compiler to use. This is an optional setting, which defaults
@@ -20,51 +17,27 @@
# Under Linux, for some reason the compiler driver wants to search the PATH to
# find the system assembler, which breaks if the LLVM assembler is in our path.
# Hack it to use the assembler in /usr/bin directly.
-#
CXX = @CXX@
# We have the same problem with the CC binary, which use used by testcases for
# native builds.
-#
CC := @CC@
-#
-# Compilation flags for the C and C++ compilers.
-#
-
-#
-# Removing the compiler flags for now. They interfere with the test suite
-# (which has its own autoconf stuff), and we don't use -DHAVE_CONFIG_H anyway.
-#
-#CPPFLAGS+=@DEFS@
-#CCFLAGS+=@DEFS@
+# Linker flags.
LDFLAGS+=@LDFLAGS@
-#
-# Removed since it prevents the tests from working properly.
-#
-#LIBS+=@LIBS@
-
-#
# Libraries needed by tools
-#
TOOLLINKOPTS=@LIBS@
-#
-# Path to the archiver program.
-#
+# Path to the library archiver program.
AR_PATH = @AR@
-#
# The pathnames of the Flex and Bison programs, respectively.
-#
YACC = @YACC@
BISON = @BISON@
FLEX = @LEX@
-#
# Paths to miscellaneous programs.
-#
RPWD = pwd
SED = sed
RM = rm
@@ -76,29 +49,27 @@
DOT = @DOT@
ETAGS = @ETAGS@
-#
# Determine the target for which LLVM should generate code.
-#
LLVMGCCARCH := @target@/3.4-llvm
+# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
+LCC1 = @LLVMCC1@
+LCC1XX = @LLVMCC1PLUS@
+
# Path to directory where object files should be stored during a build.
# Set OBJ_ROOT to "." if you do not want to use a separate place for
# object files.
-#
-#OBJ_ROOT = .
OBJ_ROOT := .
# Path to location for LLVM front-end this should only be specified here if you
# want to override the value set in Makefile.$(uname)
-#
LLVMGCCDIR := @LLVMGCCDIR@
-# When this setting is set to true, programs in the llvm/test/Programs hierarchy
+# When this variable is set to 1, programs in the llvm/test/Programs hierarchy
# are not recompiled from source code. Instead, the bytecode for the file is
# pulled from the BYTECODE_REPOSITORY directory. This can be useful when disk
# space is limited or when you just don't want to spend time running the C
# frontend.
-#
#USE_PRECOMPILED_BYTECODE := 1
@UPB@
@@ -106,58 +77,42 @@
# versions of the test/Programs/* programs. This is used as the bytecode source
# when USE_PRECOMPILED_BYTECODE is specified or when source code is not
# available for the program (such as SPEC).
-#
BYTECODE_REPOSITORY := @BCR@
-#
# SPEC benchmarks:
# Set the USE_SPEC variable to enable the use of the SPEC benchmarks.
# You must provide the SPEC benchmarks on your own.
-#
@USE_SPEC@
-#
# Path to the SPEC benchmarks. If you have the SPEC benchmarks, place the
# path here.
-#
#SPEC_ROOT := /home/vadve/shared/benchmarks/speccpu2000/benchspec
SPEC_ROOT := @SPEC_ROOT@
-#
# Path to the PAPI code. This is used by the reoptimizer only.
-#
#PAPIDIR := /home/vadve/shared/papi-2.3.4.1
PAPIDIR := @PAPIDIR@
# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1)
-#
+# make command line (ie, make ENABLE_PROFILING=1):
# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
# turned on, and Debug builds are turned off.
-#
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@
# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
-#
#ENABLE_PROFILING = 1
-#
# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
-#
#VERBOSE = 1
-#
# Enable JIT for this platform
-#
@JIT@
-#
# Disable LLC diffs for testing.
-#
@DISABLE_LLC_DIFFS@
###########################################################################
@@ -176,37 +131,27 @@
#
###########################################################################
-#
# Set the object build directory. By default, it is the current directory.
-#
ifndef BUILD_OBJ_DIR
BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
endif
-#
# Set the root of the object directory.
-#
ifndef BUILD_OBJ_ROOT
BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
endif
-#
# Set the source build directory. That is almost always the current directory.
-#
ifndef BUILD_SRC_DIR
BUILD_SRC_DIR := $(subst //,/, at abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
endif
-#
# Set the source root directory.
-#
ifndef BUILD_SRC_ROOT
BUILD_SRC_ROOT := $(subst //,/, at abs_top_srcdir@)
endif
-#
# Set the LLVM object directory.
-#
ifndef LLVM_OBJ_ROOT
ifdef LLVM_SRC_ROOT
LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
@@ -215,23 +160,18 @@
endif
endif
-#
# Set the LLVM source directory.
# It is typically the root directory of what we're compiling now.
-#
ifndef LLVM_SRC_ROOT
LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
endif
-#
# Set SourceDir for backwards compatbility.
-#
ifndef SourceDir
SourceDir=$(BUILD_SRC_DIR)
endif
# Installation directories, as provided by the configure script.
-
exec_prefix = @exec_prefix@
prefix = @prefix@
program_transform_name = @program_transform_name@
More information about the llvm-commits
mailing list