[llvm-branch-commits] [llvm-branch] r69012 - in /llvm/branches/Apple/Dib: lib/CodeGen/SelectionDAG/DAGCombiner.cpp lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp lib/Transforms/Scalar/LoopIndexSplit.cpp test/CodeGen/X86/2008-09-10-SpillerBug2.ll test/CodeGen/X86/anyext-uses.ll test/CodeGen/X86/switch-zextload.ll

Bill Wendling isanbard at gmail.com
Mon Apr 13 18:10:22 PDT 2009


Author: void
Date: Mon Apr 13 20:10:21 2009
New Revision: 69012

URL: http://llvm.org/viewvc/llvm-project?rev=69012&view=rev
Log:
--- Merging (from foreign repository) r69011 into '.':
U    lib/Transforms/Scalar/LoopIndexSplit.cpp

LoopIndexSplit needs to inform the loop pass manager of the instructions it is
deleting, not just the basic block.

Added:
    llvm/branches/Apple/Dib/test/CodeGen/X86/anyext-uses.ll
    llvm/branches/Apple/Dib/test/CodeGen/X86/switch-zextload.ll
Removed:
    llvm/branches/Apple/Dib/test/CodeGen/X86/2008-09-10-SpillerBug2.ll
Modified:
    llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/DAGCombiner.cpp
    llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp
    llvm/branches/Apple/Dib/lib/Transforms/Scalar/LoopIndexSplit.cpp

Modified: llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/DAGCombiner.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/DAGCombiner.cpp?rev=69012&r1=69011&r2=69012&view=diff

==============================================================================
--- llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/DAGCombiner.cpp (original)
+++ llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/DAGCombiner.cpp Mon Apr 13 20:10:21 2009
@@ -2874,7 +2874,7 @@
 }
 
 // ExtendUsesToFormExtLoad - Trying to extend uses of a load to enable this:
-// "fold ({s|z}ext (load x)) -> ({s|z}ext (truncate ({s|z}extload x)))"
+// "fold ({s|z|a}ext (load x)) -> ({s|z|a}ext (truncate ({s|z|a}extload x)))"
 // transformation. Returns true if extension are possible and the above
 // mentioned transformation is profitable.
 static bool ExtendUsesToFormExtLoad(SDNode *N, SDValue N0,
@@ -2889,8 +2889,10 @@
     SDNode *User = *UI;
     if (User == N)
       continue;
+    if (UI.getUse().getResNo() != N0.getResNo())
+      continue;
     // FIXME: Only extend SETCC N, N and SETCC N, c for now.
-    if (User->getOpcode() == ISD::SETCC) {
+    if (ExtOpc != ISD::ANY_EXTEND && User->getOpcode() == ISD::SETCC) {
       ISD::CondCode CC = cast<CondCodeSDNode>(User->getOperand(2))->get();
       if (ExtOpc == ISD::ZERO_EXTEND && ISD::isSignedIntSetCC(CC))
         // Sign bits will be lost after a zext.
@@ -2906,32 +2908,25 @@
       }
       if (Add)
         ExtendNodes.push_back(User);
-    } else {
-      for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) {
-        SDValue UseOp = User->getOperand(i);
-        if (UseOp == N0) {
-          // If truncate from extended type to original load type is free
-          // on this target, then it's ok to extend a CopyToReg.
-          if (isTruncFree && User->getOpcode() == ISD::CopyToReg)
-            HasCopyToRegUses = true;
-          else
-            return false;
-        }
-      }
+      continue;
     }
+    // If truncates aren't free and there are users we can't
+    // extend, it isn't worthwhile.
+    if (!isTruncFree)
+      return false;
+    // Remember if this value is live-out.
+    if (User->getOpcode() == ISD::CopyToReg)
+      HasCopyToRegUses = true;
   }
 
   if (HasCopyToRegUses) {
     bool BothLiveOut = false;
     for (SDNode::use_iterator UI = N->use_begin(), UE = N->use_end();
          UI != UE; ++UI) {
-      SDNode *User = *UI;
-      for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) {
-        SDValue UseOp = User->getOperand(i);
-        if (UseOp.getNode() == N && UseOp.getResNo() == 0) {
-          BothLiveOut = true;
-          break;
-        }
+      SDUse &Use = UI.getUse();
+      if (Use.getResNo() == 0 && Use.getUser()->getOpcode() == ISD::CopyToReg) {
+        BothLiveOut = true;
+        break;
       }
     }
     if (BothLiveOut)
@@ -3013,8 +3008,8 @@
       DoXform = ExtendUsesToFormExtLoad(N, N0, ISD::SIGN_EXTEND, SetCCs, TLI);
     if (DoXform) {
       LoadSDNode *LN0 = cast<LoadSDNode>(N0);
-      SDValue ExtLoad = DAG.getExtLoad(ISD::SEXTLOAD, N->getDebugLoc(),
-                                       VT, LN0->getChain(),
+      SDValue ExtLoad = DAG.getExtLoad(ISD::SEXTLOAD, N->getDebugLoc(), VT,
+                                       LN0->getChain(),
                                        LN0->getBasePtr(), LN0->getSrcValue(),
                                        LN0->getSrcValueOffset(),
                                        N0.getValueType(),
@@ -3034,8 +3029,8 @@
           if (SOp == Trunc)
             Ops.push_back(ExtLoad);
           else
-            Ops.push_back(DAG.getNode(ISD::SIGN_EXTEND, N->getDebugLoc(),
-                                      VT, SOp));
+            Ops.push_back(DAG.getNode(ISD::SIGN_EXTEND,
+                                      N->getDebugLoc(), VT, SOp));
         }
 
         Ops.push_back(SetCC->getOperand(2));
@@ -3278,26 +3273,48 @@
   }
 
   // fold (aext (load x)) -> (aext (truncate (extload x)))
-  if (ISD::isNON_EXTLoad(N0.getNode()) && N0.hasOneUse() &&
+  if (ISD::isNON_EXTLoad(N0.getNode()) &&
       ((!LegalOperations && !cast<LoadSDNode>(N0)->isVolatile()) ||
        TLI.isLoadExtLegal(ISD::EXTLOAD, N0.getValueType()))) {
-    LoadSDNode *LN0 = cast<LoadSDNode>(N0);
-    SDValue ExtLoad = DAG.getExtLoad(ISD::EXTLOAD, N->getDebugLoc(), VT,
-                                     LN0->getChain(),
-                                     LN0->getBasePtr(), LN0->getSrcValue(),
-                                     LN0->getSrcValueOffset(),
-                                     N0.getValueType(),
-                                     LN0->isVolatile(), LN0->getAlignment());
-    CombineTo(N, ExtLoad);
-    // Redirect any chain users to the new load.
-    DAG.ReplaceAllUsesOfValueWith(SDValue(LN0, 1),
-                                  SDValue(ExtLoad.getNode(), 1));
-    // If any node needs the original loaded value, recompute it.
-    if (!LN0->use_empty())
-      CombineTo(LN0, DAG.getNode(ISD::TRUNCATE, N0.getDebugLoc(),
-                                 N0.getValueType(), ExtLoad),
-                ExtLoad.getValue(1));
-    return SDValue(N, 0);   // Return N so it doesn't get rechecked!
+    bool DoXform = true;
+    SmallVector<SDNode*, 4> SetCCs;
+    if (!N0.hasOneUse())
+      DoXform = ExtendUsesToFormExtLoad(N, N0, ISD::ANY_EXTEND, SetCCs, TLI);
+    if (DoXform) {
+      LoadSDNode *LN0 = cast<LoadSDNode>(N0);
+      SDValue ExtLoad = DAG.getExtLoad(ISD::EXTLOAD, N->getDebugLoc(), VT,
+                                       LN0->getChain(),
+                                       LN0->getBasePtr(), LN0->getSrcValue(),
+                                       LN0->getSrcValueOffset(),
+                                       N0.getValueType(),
+                                       LN0->isVolatile(), LN0->getAlignment());
+      CombineTo(N, ExtLoad);
+      SDValue Trunc = DAG.getNode(ISD::TRUNCATE, N0.getDebugLoc(),
+                                  N0.getValueType(), ExtLoad);
+      CombineTo(N0.getNode(), Trunc, ExtLoad.getValue(1));
+
+      // Extend SetCC uses if necessary.
+      for (unsigned i = 0, e = SetCCs.size(); i != e; ++i) {
+        SDNode *SetCC = SetCCs[i];
+        SmallVector<SDValue, 4> Ops;
+
+        for (unsigned j = 0; j != 2; ++j) {
+          SDValue SOp = SetCC->getOperand(j);
+          if (SOp == Trunc)
+            Ops.push_back(ExtLoad);
+          else
+            Ops.push_back(DAG.getNode(ISD::ANY_EXTEND,
+                                      N->getDebugLoc(), VT, SOp));
+        }
+
+        Ops.push_back(SetCC->getOperand(2));
+        CombineTo(SetCC, DAG.getNode(ISD::SETCC, N->getDebugLoc(),
+                                     SetCC->getValueType(0),
+                                     &Ops[0], Ops.size()));
+      }
+
+      return SDValue(N, 0);   // Return N so it doesn't get rechecked!
+    }
   }
 
   // fold (aext (zextload x)) -> (aext (truncate (zextload x)))

Modified: llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp?rev=69012&r1=69011&r2=69012&view=diff

==============================================================================
--- llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp (original)
+++ llvm/branches/Apple/Dib/lib/CodeGen/SelectionDAG/SelectionDAGBuild.cpp Mon Apr 13 20:10:21 2009
@@ -243,9 +243,7 @@
   if (isa<PHINode>(I)) return true;
   BasicBlock *BB = I->getParent();
   for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E; ++UI)
-    if (cast<Instruction>(*UI)->getParent() != BB || isa<PHINode>(*UI) ||
-        // FIXME: Remove switchinst special case.
-        isa<SwitchInst>(*UI))
+    if (cast<Instruction>(*UI)->getParent() != BB || isa<PHINode>(*UI))
       return true;
   return false;
 }
@@ -1640,6 +1638,9 @@
     if (I != E-1) {
       FallThrough = CurMF->CreateMachineBasicBlock(CurBlock->getBasicBlock());
       CurMF->insert(BBI, FallThrough);
+
+      // Put SV in a virtual register to make it available from the new blocks.
+      ExportFromCurrentBlock(SV);
     } else {
       // If the last case doesn't match, go to the default block.
       FallThrough = Default;
@@ -1874,6 +1875,9 @@
     TrueBB = CurMF->CreateMachineBasicBlock(LLVMBB);
     CurMF->insert(BBI, TrueBB);
     WorkList.push_back(CaseRec(TrueBB, C, CR.GE, LHSR));
+
+    // Put SV in a virtual register to make it available from the new blocks.
+    ExportFromCurrentBlock(SV);
   }
 
   // Similar to the optimization above, if the Value being switched on is
@@ -1888,6 +1892,9 @@
     FalseBB = CurMF->CreateMachineBasicBlock(LLVMBB);
     CurMF->insert(BBI, FalseBB);
     WorkList.push_back(CaseRec(FalseBB,CR.LT,C,RHSR));
+
+    // Put SV in a virtual register to make it available from the new blocks.
+    ExportFromCurrentBlock(SV);
   }
 
   // Create a CaseBlock record representing a conditional branch to
@@ -2013,6 +2020,9 @@
     BTC.push_back(BitTestCase(CasesBits[i].Mask,
                               CaseBB,
                               CasesBits[i].BB));
+
+    // Put SV in a virtual register to make it available from the new blocks.
+    ExportFromCurrentBlock(SV);
   }
 
   BitTestBlock BTB(lowBound, cmpRange, SV,
@@ -2180,8 +2190,24 @@
 void SelectionDAGLowering::visitShift(User &I, unsigned Opcode) {
   SDValue Op1 = getValue(I.getOperand(0));
   SDValue Op2 = getValue(I.getOperand(1));
-  if (!isa<VectorType>(I.getType())) {
-    if (TLI.getPointerTy().bitsLT(Op2.getValueType()))
+  if (!isa<VectorType>(I.getType()) &&
+      Op2.getValueType() != TLI.getShiftAmountTy()) {
+    // If the operand is smaller than the shift count type, promote it.
+    if (TLI.getShiftAmountTy().bitsGT(Op2.getValueType()))
+      Op2 = DAG.getNode(ISD::ANY_EXTEND, getCurDebugLoc(),
+                        TLI.getShiftAmountTy(), Op2);
+    // If the operand is larger than the shift count type but the shift
+    // count type has enough bits to represent any shift value, truncate
+    // it now. This is a common case and it exposes the truncate to
+    // optimization early.
+    else if (TLI.getShiftAmountTy().getSizeInBits() >=
+             Log2_32_Ceil(Op2.getValueType().getSizeInBits()))
+      Op2 = DAG.getNode(ISD::TRUNCATE, getCurDebugLoc(),
+                        TLI.getShiftAmountTy(), Op2);
+    // Otherwise we'll need to temporarily settle for some other
+    // convenient type; type legalization will make adjustments as
+    // needed.
+    else if (TLI.getPointerTy().bitsLT(Op2.getValueType()))
       Op2 = DAG.getNode(ISD::TRUNCATE, getCurDebugLoc(),
                         TLI.getPointerTy(), Op2);
     else if (TLI.getPointerTy().bitsGT(Op2.getValueType()))

Modified: llvm/branches/Apple/Dib/lib/Transforms/Scalar/LoopIndexSplit.cpp
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/lib/Transforms/Scalar/LoopIndexSplit.cpp?rev=69012&r1=69011&r2=69012&view=diff

==============================================================================
--- llvm/branches/Apple/Dib/lib/Transforms/Scalar/LoopIndexSplit.cpp (original)
+++ llvm/branches/Apple/Dib/lib/Transforms/Scalar/LoopIndexSplit.cpp Mon Apr 13 20:10:21 2009
@@ -678,6 +678,7 @@
       Instruction *I = BBI;
       ++BBI;
       I->replaceAllUsesWith(UndefValue::get(I->getType()));
+      LPM->deleteSimpleAnalysisValue(I, LP);
       I->eraseFromParent();
     }
     LPM->deleteSimpleAnalysisValue(BB, LP);

Removed: llvm/branches/Apple/Dib/test/CodeGen/X86/2008-09-10-SpillerBug2.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/test/CodeGen/X86/2008-09-10-SpillerBug2.ll?rev=69011&view=auto

==============================================================================
--- llvm/branches/Apple/Dib/test/CodeGen/X86/2008-09-10-SpillerBug2.ll (original)
+++ llvm/branches/Apple/Dib/test/CodeGen/X86/2008-09-10-SpillerBug2.ll (removed)
@@ -1,40 +0,0 @@
-; RUN: llvm-as < %s | llc -march=x86 | grep movw | not grep %e.x
-; PR2681
-
- at g_491 = external global i32		; <i32*> [#uses=1]
- at g_897 = external global i16		; <i16*> [#uses=1]
-
-define i32 @func_7(i16 signext %p_9) nounwind {
-entry:
-	%p_9.addr = alloca i16		; <i16*> [#uses=2]
-	%l_1122 = alloca i16, align 2		; <i16*> [#uses=1]
-	%l_1128 = alloca i32, align 4		; <i32*> [#uses=1]
-	%l_1129 = alloca i32, align 4		; <i32*> [#uses=1]
-	%l_1130 = alloca i32, align 4		; <i32*> [#uses=1]
-	%tmp14 = load i16* %l_1122		; <i16> [#uses=1]
-	%conv15 = sext i16 %tmp14 to i32		; <i32> [#uses=1]
-	%tmp16 = load i16* %p_9.addr		; <i16> [#uses=1]
-	%conv17 = sext i16 %tmp16 to i32		; <i32> [#uses=1]
-	%xor = xor i32 %conv15, %conv17		; <i32> [#uses=1]
-	%tmp18 = load i32* null		; <i32> [#uses=1]
-	%or = or i32 %xor, %tmp18		; <i32> [#uses=1]
-	%conv19 = trunc i32 %or to i16		; <i16> [#uses=1]
-	%tmp28 = load i16* %p_9.addr		; <i16> [#uses=1]
-	%tmp33 = load i16* @g_897		; <i16> [#uses=1]
-	%tmp34 = load i32* @g_491		; <i32> [#uses=1]
-	%conv35 = trunc i32 %tmp34 to i16		; <i16> [#uses=1]
-	%tmp36 = load i16* null		; <i16> [#uses=1]
-	%conv37 = trunc i16 %tmp36 to i8		; <i8> [#uses=1]
-	%tmp38 = load i32* %l_1128		; <i32> [#uses=1]
-	%conv39 = sext i32 %tmp38 to i64		; <i64> [#uses=1]
-	%tmp42 = load i32* %l_1129		; <i32> [#uses=1]
-	%conv43 = trunc i32 %tmp42 to i16		; <i16> [#uses=1]
-	%tmp44 = load i32* %l_1130		; <i32> [#uses=1]
-	%conv45 = sext i32 %tmp44 to i64		; <i64> [#uses=1]
-	%call46 = call i32 @func_18( i16 zeroext 0, i16 zeroext 0, i16 zeroext %tmp33, i16 zeroext %conv35, i8 zeroext %conv37, i64 %conv39, i32 0, i16 zeroext %conv43, i64 %conv45, i8 zeroext 1 )		; <i32> [#uses=0]
-	%call48 = call i32 @func_18( i16 zeroext 0, i16 zeroext 0, i16 zeroext 0, i16 zeroext 1, i8 zeroext 0, i64 0, i32 1, i16 zeroext %tmp28, i64 0, i8 zeroext 1 )		; <i32> [#uses=0]
-	%call50 = call i32 @func_18( i16 zeroext 1, i16 zeroext 0, i16 zeroext 0, i16 zeroext 1, i8 zeroext 0, i64 0, i32 1, i16 zeroext %conv19, i64 0, i8 zeroext 1 )		; <i32> [#uses=0]
-	ret i32 undef
-}
-
-declare i32 @func_18(i16 zeroext, i16 zeroext, i16 zeroext, i16 zeroext, i8 zeroext, i64, i32, i16 zeroext, i64, i8 zeroext)

Added: llvm/branches/Apple/Dib/test/CodeGen/X86/anyext-uses.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/test/CodeGen/X86/anyext-uses.ll?rev=69012&view=auto

==============================================================================
--- llvm/branches/Apple/Dib/test/CodeGen/X86/anyext-uses.ll (added)
+++ llvm/branches/Apple/Dib/test/CodeGen/X86/anyext-uses.ll Mon Apr 13 20:10:21 2009
@@ -0,0 +1,47 @@
+; RUN: llvm-as < %s | llc -march=x86-64 > %t
+; RUN: grep mov %t | count 8
+; RUN: not grep implicit %t
+
+; Avoid partial register updates; don't define an i8 register and read
+; the i32 super-register.
+
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128"
+target triple = "x86_64-apple-darwin9.6"
+	%struct.RC4_KEY = type { i8, i8, [256 x i8] }
+
+define void @foo(%struct.RC4_KEY* nocapture %key, i64 %len, i8* %indata, i8* %outdata) nounwind {
+entry:
+	br label %bb24
+
+bb24:		; preds = %bb24, %entry
+	%0 = load i8* null, align 1		; <i8> [#uses=1]
+	%1 = zext i8 %0 to i64		; <i64> [#uses=1]
+	%2 = shl i64 %1, 32		; <i64> [#uses=1]
+	%3 = getelementptr %struct.RC4_KEY* %key, i64 0, i32 2, i64 0		; <i8*> [#uses=1]
+	%4 = load i8* %3, align 1		; <i8> [#uses=2]
+	%5 = add i8 %4, 0		; <i8> [#uses=2]
+	%6 = zext i8 %5 to i64		; <i64> [#uses=0]
+	%7 = load i8* null, align 1		; <i8> [#uses=1]
+	%8 = zext i8 %4 to i32		; <i32> [#uses=1]
+	%9 = zext i8 %7 to i32		; <i32> [#uses=1]
+	%10 = add i32 %9, %8		; <i32> [#uses=1]
+	%11 = and i32 %10, 255		; <i32> [#uses=1]
+	%12 = zext i32 %11 to i64		; <i64> [#uses=1]
+	%13 = getelementptr %struct.RC4_KEY* %key, i64 0, i32 2, i64 %12		; <i8*> [#uses=1]
+	%14 = load i8* %13, align 1		; <i8> [#uses=1]
+	%15 = zext i8 %14 to i64		; <i64> [#uses=1]
+	%16 = shl i64 %15, 48		; <i64> [#uses=1]
+	%17 = getelementptr %struct.RC4_KEY* %key, i64 0, i32 2, i64 0		; <i8*> [#uses=1]
+	%18 = load i8* %17, align 1		; <i8> [#uses=2]
+	%19 = add i8 %18, %5		; <i8> [#uses=1]
+	%20 = zext i8 %19 to i64		; <i64> [#uses=1]
+	%21 = getelementptr %struct.RC4_KEY* %key, i64 0, i32 2, i64 %20		; <i8*> [#uses=1]
+	store i8 %18, i8* %21, align 1
+	%22 = or i64 0, %2		; <i64> [#uses=1]
+	%23 = or i64 %22, 0		; <i64> [#uses=1]
+	%24 = or i64 %23, %16		; <i64> [#uses=1]
+	%25 = or i64 %24, 0		; <i64> [#uses=1]
+	%26 = xor i64 %25, 0		; <i64> [#uses=1]
+	store i64 %26, i64* null, align 8
+	br label %bb24
+}

Added: llvm/branches/Apple/Dib/test/CodeGen/X86/switch-zextload.ll
URL: http://llvm.org/viewvc/llvm-project/llvm/branches/Apple/Dib/test/CodeGen/X86/switch-zextload.ll?rev=69012&view=auto

==============================================================================
--- llvm/branches/Apple/Dib/test/CodeGen/X86/switch-zextload.ll (added)
+++ llvm/branches/Apple/Dib/test/CodeGen/X86/switch-zextload.ll Mon Apr 13 20:10:21 2009
@@ -0,0 +1,34 @@
+; RUN: llvm-as < %s | llc -march=x86 | grep mov | count 1
+
+; Do zextload, instead of a load and a separate zext.
+
+target datalayout = "e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:32:64-v64:64:64-v128:128:128-a0:0:64-f80:128:128"
+target triple = "i386-apple-darwin9.6"
+	%struct.move_s = type { i32, i32, i32, i32, i32, i32 }
+	%struct.node_t = type { i8, i8, i8, i8, i32, i32, %struct.node_t**, %struct.node_t*, %struct.move_s }
+
+define fastcc void @set_proof_and_disproof_numbers(%struct.node_t* nocapture %node) nounwind {
+entry:
+	%0 = load i8* null, align 1		; <i8> [#uses=1]
+	switch i8 %0, label %return [
+		i8 2, label %bb31
+		i8 0, label %bb80
+		i8 1, label %bb82
+		i8 3, label %bb84
+	]
+
+bb31:		; preds = %entry
+	unreachable
+
+bb80:		; preds = %entry
+	ret void
+
+bb82:		; preds = %entry
+	ret void
+
+bb84:		; preds = %entry
+	ret void
+
+return:		; preds = %entry
+	ret void
+}





More information about the llvm-branch-commits mailing list