Hi all,<div><br></div><div>I've refactored the code to put most of the work on the StackFrameList class, but I still have one problem:</div><div>The state of execution isn't being updated.</div><div><br></div><div>
- If I try to print the pc register after returning, it will just give me the old value (still in the function).</div><div>- The first thread step-over command after returning from a function isn't working, too. But that may have to do with:</div>
<div>- I can't update the stackframe list. thread backtrace always puts me inside the function.</div><div><br></div><div>These three problems may be interconnected. I'll try to debug further.</div><div><br></div><div>
I also can't do what Jim suggested. I got the Block reference, from the frame. I can see if it's inlined and its size, but can't tell where it starts/ends.</div><div><br></div><div>I'll send two patches: They're the same except for the implemented command.</div>
<div><br></div><div>In one, the command is "thread return", in the other it is "frame return".</div><div><br></div><div>My problem is… Except for "frame select", the frame commands only work on the current frame (not on other frames), so I would see "frame return" as return only from the current frame. While "thread return" could return from any frame (defaulting for the current thread). What do you think?</div>
<div><br></div><div>I'm also sending a test directory, using the "thread return" variation.</div><div><br></div><div>Regards,</div><div><br></div><div> Filipe Cabecinhas<br><br><div class="gmail_quote">On Fri, Jul 22, 2011 at 16:25, Filipe Cabecinhas <span dir="ltr"><<a href="mailto:filcab%2Blldb-dev@gmail.com">filcab+lldb-dev@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Thanks for the help and advice. I will ping back the list with more stuff when I'm done.<div><br></div><div>Regards,</div>
<div><br></div><div><font color="#888888"> Filipe</font><div><div></div><div class="h5"><br><br><div class="gmail_quote">On Fri, Jul 22, 2011 at 16:23, Jim Ingham <span dir="ltr"><<a href="mailto:jingham@apple.com" target="_blank">jingham@apple.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><br>
On Jul 22, 2011, at 3:46 PM, Filipe Cabecinhas wrote:<br>
<br>
><br>
><br>
> On Fri, Jul 22, 2011 at 15:18, Jim Ingham <<a href="mailto:jingham@apple.com" target="_blank">jingham@apple.com</a>> wrote:<br>
> Filipe,<br>
><br>
> Thanks for working on this.<br>
><br>
> Note, gdb's "return" command doesn't do anything to attempt to clean up local objects. It just pops the frames off the stack & returns the value. This, like moving the PC by hand, is one of those commands that you just shouldn't use if you don't know what could go wrong... Anyway, people mostly use this to hack system routines to do something else, in which case you stop at the very beginning and return directly - you haven't gotten far enough to need to do any cleanup.<br>
><br>
> Seems to me that the sensible thing to do about the return expression is take whatever the user gives you and cast it to the return type of the function you are returning from, if you know it. If you don't then just write it as whatever they have given you, and the user will have to get it right when they write the expression. That's the best you can do in this case.<br>
><br>
> OK.<br>
><br>
> It also seems to me that much more of this could be generic. The algorithm gdb uses is to get the register context one frame up on the stack, and write that to the real registers, and then throw away the cached stack and remake it from the changed registers. That can all be done generically. Mind there are target specific bits but they are all hidden under the register code. It is the unwinder's job to know what the register state of the functions up on the stack are, you should rely on that.<br>
><br>
> The only ABI specific bit is that you need to ask the ABI where to store the return value. For things smaller than a register that is easy. For struct returns it can be hard, because the compiler usually passes in a pointer to the save location, but you would have to track the history of that value to know where it is stored at the point you are trying to return from, and that's not trivial. Again, if you are at the beginning of the function you're returning from, this is easy to do.<br>
><br>
> Ok. You're suggesting taking the code out of the ABI and putting it on the command (or maybe the StackFrame)? I initially wrote the code thinking calling conventions could vary a lot but, for the returns, they don't vary that much (and lldb allows us to abstract most of what varies). Or would it be preferred to just contain the code in the command object?<br>
<br>
</div>Yes. This functionality seems generally useful, so the code to do this should go somewhere in the core. Then the command would just be a thin wrapper. StackFrame doesn't seem right to me, since you are operating on the list of frames more than the individual frame. So either StackFrameList, or its owner Thread, seem good places.<br>
<div><br>
><br>
> I suppose the command should also be changed to the "frame" command, to mimic gdb (it returns from the current frame, not the bottom-most).<br>
><br>
<br>
</div>Yes, that makes sense, you would either return from the currently selected frame, or from a frame given explicitly in the command. Note in general in lldb we try to avoid positional arguments, so I would do:<br>
<br>
frame return --frame <FRAME NUMBER> <expression><br>
<br>
BTW, you can also make LLDB commands "RAW" commands, which means that everything after the options is passed unparsed to the command. That's very convenient for commands that take an expression as their argument, since then you don't end up having to backslash yourself to death. See the "expression" command for an example of this.<br>
<br>
Oh, yeah, another thing, though very trivial, since you defined your command with:<br>
<br>
eFlagProcessMustBeLaunched | eFlagProcessMustBePaused<br>
<br>
you don't have to check whether the process & target are valid, the command interpreter shouldn't call you if they are not.<br>
<br>
Again, thanks for working on this!<br>
<font color="#888888"><br>
Jim<br>
</font><div><div></div><div><br>
<br>
> You can also check whether the block you are in is inlined, and if it is, then all you do is move the PC to the end of the block. You can't really do anything about the return value then, because you can't really tell where it is going, but at least you can return properly from the inlined function.<br>
><br>
> Hope that helps...<br>
> I will try that one too, thanks.<br>
><br>
> Regards,<br>
><br>
> Filipe<br>
><br>
><br>
> Jim<br>
><br>
> On Jul 22, 2011, at 12:35 PM, Filipe Cabecinhas wrote:<br>
><br>
> ><br>
> ><br>
> > On Mon, Jul 18, 2011 at 18:05, Greg Clayton <<a href="mailto:gclayton@apple.com" target="_blank">gclayton@apple.com</a>> wrote:<br>
> > On Jul 18, 2011, at 5:23 PM, Filipe Cabecinhas wrote:<br>
> ><br>
> > > Hi,<br>
> > ><br>
> > > Is there a way to mimic gdb's "return <expr>" command?<br>
> ><br>
> > Not if you want to change the return value.<br>
> ><br>
> > If you don't want to change the return value you can use "thread step-out". "thread step-out" (which is aliased to "finish"), is context sensitive to the frame you are currently in, so if you run and stop in a frame and then do a "frame select 12", and then to a "thread step-out", you will return to frame 13.<br>
> ><br>
> > Yes, that command will run until the frame returns (like gdb's finish command), but what if we want to return immediately?<br>
> ><br>
> > > (gdb) help return<br>
> > > Make selected stack frame return to its caller.<br>
> > > Control remains in the debugger, but when you continue<br>
> > > execution will resume in the frame above the one now selected.<br>
> > > If an argument is given, it is an expression for the value to return.<br>
> > ><br>
> > ><br>
> > > I've been looking at the StackFrame class, but it doesn't look like it can do that.<br>
> > > If I wanted to implement it, where should I look first? I can get the return address (StackFrame.GetRegisterContext().get().GetReturnAddress(), I think) write it to the PC (StackFrame.ChangePC()), but I have no idea how to get the expression's result into the return registers/memory.<br>
> ><br>
> > LLDB currently doesn't have any real idea of where the return address goes, we currently let the compiler handle all ABI issues by the way we make expressions.<br>
> ><br>
> > There is another issue where if a function isn't external, the compiler can make a call to this function and how the function returns the value, violate the ABI. In most cases you won't get affected by this, but it would be nice if we knew for sure from the compiler or debug info where the return value is. The old ARM compiler used to inject artificial DW_TAG_variable debug information entries into the DWARF that would tell you the result of functions which has a location that describes the returned value and where it is.<br>
> ><br>
> ><br>
> > > ClangExpression isn't a big help there, since the result comes to debugger-land.<br>
> ><br>
> > Yep, and even so there is the issue that internal functions can violate the ABI...<br>
> ><br>
> > FYI: anything ABI related is currently in the ABI plug-ins:<br>
> ><br>
> > lldb/source/Plugins/ABI/*<br>
> ><br>
> > The ABI function:<br>
> ><br>
> > virtual bool<br>
> > ABI::GetReturnValue (Thread &thread,<br>
> > Value &value) const = 0;<br>
> ><br>
> > Take a look a the ABIMacOSX_i386 and ABIMacOSX_x86_64 versions of this function and see if this does close to what you want. You can also fill in more functionality inside these for types you want it to support. Currently we fill the "value" argument with the result, but we don't fill in the context (See the "void Value::SetContext (ContextType context_type, void *p)" function for details, but the ABI::GetReturnValue functions can be modified to fill in the register context for return values that are returned in registers, and the address (See the "Value::SetValueType (...)" function) if needed.<br>
> ><br>
> > These functions currently will attempt to extract the return value for a function according to the ABI rules for simple pointer size or less types only (no structs, floats, complex etc). So this might help you for the simple cases. If you were to implement this command you would want to add a new "return" subcommand in the "thread" multi-word command. In the "Execute" function of the new "return" command you would want to evaluate an expression an store the result, set a breakpoint at the return address, install a breakpoint callback and run and hit the breakpoint, then try and instert the expression result into the appropriate location (you would need to modify the "ABI::GetReturnValue(...)" to fill in the "value" param more completely with the location of the return type.<br>
> ><br>
> > Greg Clayton<br>
> ><br>
> ><br>
> > I implemented a thread return command, which works (right now) for integers and pointers, for i386 and x86-64. The command has some caveats (like the ones discussed here), but it works (at least) for a few simple examples in C.<br>
> ><br>
> > "thread return <expr>" returns the result of evaluating that expression. I'm not casting the expression, so there may be some problems (especially when returning floating point types is implemented).<br>
> ><br>
> > But…<br>
> > We have no idea if the compiler generated a stackframe for this function or not. We may be returning from two functions, and not one.<br>
> > We have no ideia if the compiler changed the calling conventions for this code.<br>
> > We don't know about the callee-saved registers (I suppose there isn't a way to find out the epilogue of the function… Especially since it may be mixed with "regular code")<br>
> ><br>
> > There are a lot more issues for C++ code (e.g: calling dtors).<br>
> ><br>
> > I also have some problems updating the state lldb thinks the thread is in.<br>
> ><br>
> > "register read pc" won't read the real value<br>
> > "thread backtrace" doesn't get updated.<br>
> ><br>
> > How can I fix that? I am also looking for comments on stuff to fix/improve.<br>
> ><br>
> > I also have some tests (a directory to put in lldb/test/).<br>
> ><br>
> > Regards,<br>
> ><br>
> > Filipe Cabecinhas<br>
> ><br>
> > P.S: Converting between a ValueObject object and<br>
> > <thread-return.patch><thread_return.zip>_______________________________________________<br>
> > lldb-dev mailing list<br>
> > <a href="mailto:lldb-dev@cs.uiuc.edu" target="_blank">lldb-dev@cs.uiuc.edu</a><br>
> > <a href="http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev" target="_blank">http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev</a><br>
><br>
><br>
<br>
</div></div></blockquote></div><br></div></div></div>
</blockquote></div><br></div>