<div dir="ltr">I mentioned this a few times earlier, but admittedly the thread has grown pretty long.<div><br></div><div>HostThread is a replacement for thread_t. Anywhere you use a thread_t, you can use a HostThread. This applies obviously to threads inside the debugger itself, but also to any other threads on the machine. In the case of debugging process P locally, for example, it might be used when viewing or manipulating the threads of P. Even in remote debuggign scenarios, the debugserver might use a HostThread to manipulate threads in the inferior. There's already a method in Host called FindProcessThreads, for example. Instead of returning a list of thread ids, it could return a list of HostThreads. The size of the class should not be much (if any) larger than an lldb::thread_t, it just has extra methods for convenience.</div>
</div><div class="gmail_extra"><br><br><div class="gmail_quote">On Fri, Aug 29, 2014 at 11:28 AM, <span dir="ltr"><<a href="mailto:jingham@apple.com" target="_blank">jingham@apple.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
One thing I am unclear about, I had thought that HostThread in particular would be used for threads IN lldb, but not for handling threads in a program lldb is debugging when on that Host. So for instance, Suspend & Resume don't seem necessary or desirable when dealing with threads lldb is using for implementing lldb, and Launch is possible but quite tricky and not required for remote threads on the same Host.<br>
<br>
What is the actual story here?<br>
<span class="HOEnZb"><font color="#888888"><br>
Jim<br>
</font></span><div class="HOEnZb"><div class="h5"><br>
<br>
> On Aug 29, 2014, at 11:19 AM, Zachary Turner <<a href="mailto:zturner@google.com">zturner@google.com</a>> wrote:<br>
><br>
> What do you think about this? I implement the abstract base class. I'll give it the following methods:<br>
><br>
> Pure virtual:<br>
> * Launch<br>
> * Join<br>
> * Cancel<br>
> * GetState (enumerated value : invalid, running, exited, suspended, cancelled)<br>
> * Suspend<br>
> * Resume<br>
> * GetThreadResult<br>
><br>
> Virtual with default implementations:<br>
> * GetName<br>
> * SetName<br>
><br>
> Cancel will return an lldb::Error if cancellation is not supported (for example because we're on windows and we don't own the thread routine). If you think of any other methods that should go here, let me know.<br>
><br>
> Initial patch will go in like this, with no code yet updated to use the new HostThread. In a subsequent patch, I will change thread_t's to HostThreads, updating code as necessary. We can evaluate the decision about the typedef vs. the base class at this point, when we see what (if any) impact this will have on whether specific methods will be accessed from generic code. At this point, if there's still disagreement, I can even make two separate patches - one that does it each way, so that we can compare actual code that uses both methods.<br>
><br>
><br>
> On Fri, Aug 29, 2014 at 11:01 AM, <<a href="mailto:jingham@apple.com">jingham@apple.com</a>> wrote:<br>
><br>
> > On Aug 29, 2014, at 10:09 AM, Zachary Turner <<a href="mailto:zturner@google.com">zturner@google.com</a>> wrote:<br>
> ><br>
> > On Fri, Aug 29, 2014 at 9:54 AM, <<a href="mailto:jingham@apple.com">jingham@apple.com</a>> wrote:<br>
> ><br>
> > > SystemLog<br>
> > > ThreadDetach<br>
> > > ThreadCancel<br>
> ><br>
> > There must be some way on Windows to tell a thread to exit at the next cancellation point? Can you really not cancel a worker thread's operation?<br>
> ><br>
> > Not an arbitrary thread, no. You can forcefully terminate it (with caveats, and it may not work and/or have unexpected behavior, so it is strongly discouraged), but generally if you want to gracefully cancel a thread, the thread has to have specific code in its run loop to make that possible. So it might work for threads that we create inside the lldb process, since we control the thread routine, but it wouldn't be meaningful for threads in other process. The reason for this discrepancy is that there is no concept of signals on Windows, which I assume is how thread cancellation is implemented behind the scenes on posix platforms.<br>
><br>
> I don't think thread cancellation requires signals for same process thread cancellation for pthreads, but it does use kernel support. The system defines "cancellation points" - e.g. select, read, etc. where a thread is likely to sit waiting, and pthread_cancel just marks the target thread so that if it is in a cancellation routine (they're pretty much all kernel traps) it gets killed off, otherwise the request is postponed till the thread enters a cancellation point and then it gets killed. I don't think you would need signals for this.<br>
><br>
> But it is something we need to do for all our ports, since we rely on this for shutting down the Process worker threads cleanly. Since we only really care about canceling threads we create, I think it would be okay for ThreadCancel to be a no-op for other threads.<br>
><br>
> ><br>
> ><br>
> > > GetAuxvData<br>
> > ><br>
> > > Before my original HostInfo refactor, it also had these methods:<br>
> > ><br>
> > > GetUserID<br>
> > > GetGroupID<br>
> > > GetEffectiveUserID<br>
> > > GetEffectiveGroupID<br>
> > ><br>
> > > Those methods were just as accessible to anyone writing generic code. They are *less* accessible now, because they are on HostInfoPosix. And this happened without needing to introduce any platform specific pre-processor defines into generic LLDB. There was maybe one exception, which Jason Molenda pointed out earlier, which was the GetOSBuildString. And that only happened because GetOSBuildString is not a generic concept! The design worked exactly as intended, exposing a place where code that was intended to be generic actually wasn't as generic as it thought it was. Everywhere else, the GetUserID, GetGroupID, etc methods were only being called from specific code (which is how it should work), but after my change this is now enforced by the compiler.<br>
> > ><br>
> > ><br>
> ><br>
> > But again, if I'm writing code it seems like a real pain to have to answer the question "is this an interface I can use in generic code" be:<br>
> ><br>
> > For now you can if it exists in all the HostThreadXXX.h files, but of course if somebody introduces another platform and decides that they don't want to implement this function then you can't use it anymore and have to put<br>
> ><br>
> > #if defined<br>
> ><br>
> > guards around the usage. Instead, we should look at the host interfaces and say there are three classes of things:<br>
> ><br>
> > 1) Things you must implement in order to port lldb to a host<br>
> > These should be pure virtual methods in HostFeature.h<br>
> > 2) Things you can optionally implement, but there's a reasonable "couldn't do that" fallback<br>
> > These should be virtual methods in HostFeature.h<br>
> > 3) Things that are purely host specific.<br>
> > These should be methods in HostFeatureMyHost.h, and can only be used in HostOtherFeatureMyHost.h, but never in generic code.<br>
> ><br>
> > This would make the job of folks working in generic code clear, and also make it obvious to the next porter (OpenVMS, anyone?) what they have to do.<br>
> ><br>
> > I'm ok with doing all of this. I'm all for having the compiler catch things for you, and if one of the things it can catch for you is "you need to implement this method" then that's great. That said, I'm still rather fond of the idea of typedefing HostFeature to HostFeatureMyHost and then having everyone use HostFeature. No matter if you do it or don't, it's still equally easy to write specific code from generic code. You could just do this:<br>
> ><br>
> > #if defined(__APPLE__)<br>
> > ((HostFeatureMacOSX&)feature).AppleSpecificMethod();<br>
> > #endif<br>
> ><br>
> > as opposed to this<br>
> ><br>
> > #if defined(__APPLE__)<br>
> > feature.AppleSpecificMethod();<br>
> > #endif<br>
> ><br>
><br>
> My feeling about this is since you'd actually have to do:<br>
><br>
> #if defined(__APPLE__)<br>
> #include "lldb/Host/windows/HostFeatureMacOSX.h"<br>
> (((HostFeatureMacOSX&)feature).AppleSpecificMethod();<br>
> #endif<br>
><br>
> I hope at that point you'd know you've gone off the reservation.<br>
><br>
> Jim<br>
><br>
><br>
><br>
> > In both cases though, the person has felt strongly enough about it to put it in a pre-processor guard, so the decision has already been made. And the second method has the benefit that when you're writing specific code (which I anticipate to write alot of for Windows), you just always have the type you need.<br>
><br>
><br>
<br>
</div></div></blockquote></div><br></div>