[Lldb-commits] [lldb] r127484 - in /lldb/trunk/test: ./ pexpect-2.4/ pexpect-2.4/doc/ pexpect-2.4/examples/
Johnny Chen
johnny.chen at apple.com
Fri Mar 11 12:13:06 PST 2011
Author: johnny
Date: Fri Mar 11 14:13:06 2011
New Revision: 127484
URL: http://llvm.org/viewvc/llvm-project?rev=127484&view=rev
Log:
Add pexpect-2.4 (a pure Python module for controlling and automating other programs) to the test directory.
http://pypi.python.org/pypi/pexpect/
Added:
lldb/trunk/test/pexpect-2.4/
lldb/trunk/test/pexpect-2.4/ANSI.py
lldb/trunk/test/pexpect-2.4/FSM.py
lldb/trunk/test/pexpect-2.4/INSTALL
lldb/trunk/test/pexpect-2.4/LICENSE
lldb/trunk/test/pexpect-2.4/PKG-INFO
lldb/trunk/test/pexpect-2.4/README
lldb/trunk/test/pexpect-2.4/doc/
lldb/trunk/test/pexpect-2.4/doc/clean.css
lldb/trunk/test/pexpect-2.4/doc/email.png (with props)
lldb/trunk/test/pexpect-2.4/doc/examples.html
lldb/trunk/test/pexpect-2.4/doc/index.html
lldb/trunk/test/pexpect-2.4/doc/index.template.html
lldb/trunk/test/pexpect-2.4/examples/
lldb/trunk/test/pexpect-2.4/examples/README
lldb/trunk/test/pexpect-2.4/examples/astat.py (with props)
lldb/trunk/test/pexpect-2.4/examples/bd_client.py (with props)
lldb/trunk/test/pexpect-2.4/examples/bd_serv.py (with props)
lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi (with props)
lldb/trunk/test/pexpect-2.4/examples/chess.py (with props)
lldb/trunk/test/pexpect-2.4/examples/chess2.py (with props)
lldb/trunk/test/pexpect-2.4/examples/chess3.py (with props)
lldb/trunk/test/pexpect-2.4/examples/df.py (with props)
lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py (with props)
lldb/trunk/test/pexpect-2.4/examples/ftp.py (with props)
lldb/trunk/test/pexpect-2.4/examples/hive.py (with props)
lldb/trunk/test/pexpect-2.4/examples/monitor.py (with props)
lldb/trunk/test/pexpect-2.4/examples/passmass.py (with props)
lldb/trunk/test/pexpect-2.4/examples/python.py (with props)
lldb/trunk/test/pexpect-2.4/examples/rippy.py (with props)
lldb/trunk/test/pexpect-2.4/examples/script.py (with props)
lldb/trunk/test/pexpect-2.4/examples/ssh_session.py (with props)
lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py (with props)
lldb/trunk/test/pexpect-2.4/examples/sshls.py (with props)
lldb/trunk/test/pexpect-2.4/examples/table_test.html
lldb/trunk/test/pexpect-2.4/examples/topip.py (with props)
lldb/trunk/test/pexpect-2.4/examples/uptime.py (with props)
lldb/trunk/test/pexpect-2.4/fdpexpect.py
lldb/trunk/test/pexpect-2.4/pexpect.py
lldb/trunk/test/pexpect-2.4/pxssh.py
lldb/trunk/test/pexpect-2.4/screen.py
lldb/trunk/test/pexpect-2.4/setup.py (with props)
Modified:
lldb/trunk/test/dotest.py
Modified: lldb/trunk/test/dotest.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/dotest.py?rev=127484&r1=127483&r2=127484&view=diff
==============================================================================
--- lldb/trunk/test/dotest.py (original)
+++ lldb/trunk/test/dotest.py Fri Mar 11 14:13:06 2011
@@ -496,7 +496,10 @@
def setupSysPath():
- """Add LLDB.framework/Resources/Python to the search paths for modules."""
+ """
+ Add LLDB.framework/Resources/Python to the search paths for modules.
+ As a side effect, we also discover the 'lldb' executable and export it here.
+ """
global rdir
global testdirs
@@ -523,10 +526,12 @@
else:
os.environ["LLDB_TEST"] = scriptPath
pluginPath = os.path.join(scriptPath, 'plugins')
+ pexpectPath = os.path.join(scriptPath, 'pexpect-2.4')
- # Append script dir and plugin dir to the sys.path.
+ # Append script dir, plugin dir, and pexpect dir to the sys.path.
sys.path.append(scriptPath)
sys.path.append(pluginPath)
+ sys.path.append(pexpectPath)
# This is our base name component.
base = os.path.abspath(os.path.join(scriptPath, os.pardir))
Added: lldb/trunk/test/pexpect-2.4/ANSI.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/ANSI.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/ANSI.py (added)
+++ lldb/trunk/test/pexpect-2.4/ANSI.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,334 @@
+"""This implements an ANSI terminal emulator as a subclass of screen.
+
+$Id: ANSI.py 491 2007-12-16 20:04:57Z noah $
+"""
+# references:
+# http://www.retards.org/terminals/vt102.html
+# http://vt100.net/docs/vt102-ug/contents.html
+# http://vt100.net/docs/vt220-rm/
+# http://www.termsys.demon.co.uk/vtansi.htm
+
+import screen
+import FSM
+import copy
+import string
+
+def Emit (fsm):
+
+ screen = fsm.memory[0]
+ screen.write_ch(fsm.input_symbol)
+
+def StartNumber (fsm):
+
+ fsm.memory.append (fsm.input_symbol)
+
+def BuildNumber (fsm):
+
+ ns = fsm.memory.pop()
+ ns = ns + fsm.input_symbol
+ fsm.memory.append (ns)
+
+def DoBackOne (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_back ()
+
+def DoBack (fsm):
+
+ count = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ screen.cursor_back (count)
+
+def DoDownOne (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_down ()
+
+def DoDown (fsm):
+
+ count = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ screen.cursor_down (count)
+
+def DoForwardOne (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_forward ()
+
+def DoForward (fsm):
+
+ count = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ screen.cursor_forward (count)
+
+def DoUpReverse (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_up_reverse()
+
+def DoUpOne (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_up ()
+
+def DoUp (fsm):
+
+ count = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ screen.cursor_up (count)
+
+def DoHome (fsm):
+
+ c = int(fsm.memory.pop())
+ r = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ screen.cursor_home (r,c)
+
+def DoHomeOrigin (fsm):
+
+ c = 1
+ r = 1
+ screen = fsm.memory[0]
+ screen.cursor_home (r,c)
+
+def DoEraseDown (fsm):
+
+ screen = fsm.memory[0]
+ screen.erase_down()
+
+def DoErase (fsm):
+
+ arg = int(fsm.memory.pop())
+ screen = fsm.memory[0]
+ if arg == 0:
+ screen.erase_down()
+ elif arg == 1:
+ screen.erase_up()
+ elif arg == 2:
+ screen.erase_screen()
+
+def DoEraseEndOfLine (fsm):
+
+ screen = fsm.memory[0]
+ screen.erase_end_of_line()
+
+def DoEraseLine (fsm):
+
+ screen = fsm.memory[0]
+ if arg == 0:
+ screen.end_of_line()
+ elif arg == 1:
+ screen.start_of_line()
+ elif arg == 2:
+ screen.erase_line()
+
+def DoEnableScroll (fsm):
+
+ screen = fsm.memory[0]
+ screen.scroll_screen()
+
+def DoCursorSave (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_save_attrs()
+
+def DoCursorRestore (fsm):
+
+ screen = fsm.memory[0]
+ screen.cursor_restore_attrs()
+
+def DoScrollRegion (fsm):
+
+ screen = fsm.memory[0]
+ r2 = int(fsm.memory.pop())
+ r1 = int(fsm.memory.pop())
+ screen.scroll_screen_rows (r1,r2)
+
+def DoMode (fsm):
+
+ screen = fsm.memory[0]
+ mode = fsm.memory.pop() # Should be 4
+ # screen.setReplaceMode ()
+
+def Log (fsm):
+
+ screen = fsm.memory[0]
+ fsm.memory = [screen]
+ fout = open ('log', 'a')
+ fout.write (fsm.input_symbol + ',' + fsm.current_state + '\n')
+ fout.close()
+
+class term (screen.screen):
+ """This is a placeholder.
+ In theory I might want to add other terminal types.
+ """
+ def __init__ (self, r=24, c=80):
+ screen.screen.__init__(self, r,c)
+
+class ANSI (term):
+
+ """This class encapsulates a generic terminal. It filters a stream and
+ maintains the state of a screen object. """
+
+ def __init__ (self, r=24,c=80):
+
+ term.__init__(self,r,c)
+
+ #self.screen = screen (24,80)
+ self.state = FSM.FSM ('INIT',[self])
+ self.state.set_default_transition (Log, 'INIT')
+ self.state.add_transition_any ('INIT', Emit, 'INIT')
+ self.state.add_transition ('\x1b', 'INIT', None, 'ESC')
+ self.state.add_transition_any ('ESC', Log, 'INIT')
+ self.state.add_transition ('(', 'ESC', None, 'G0SCS')
+ self.state.add_transition (')', 'ESC', None, 'G1SCS')
+ self.state.add_transition_list ('AB012', 'G0SCS', None, 'INIT')
+ self.state.add_transition_list ('AB012', 'G1SCS', None, 'INIT')
+ self.state.add_transition ('7', 'ESC', DoCursorSave, 'INIT')
+ self.state.add_transition ('8', 'ESC', DoCursorRestore, 'INIT')
+ self.state.add_transition ('M', 'ESC', DoUpReverse, 'INIT')
+ self.state.add_transition ('>', 'ESC', DoUpReverse, 'INIT')
+ self.state.add_transition ('<', 'ESC', DoUpReverse, 'INIT')
+ self.state.add_transition ('=', 'ESC', None, 'INIT') # Selects application keypad.
+ self.state.add_transition ('#', 'ESC', None, 'GRAPHICS_POUND')
+ self.state.add_transition_any ('GRAPHICS_POUND', None, 'INIT')
+ self.state.add_transition ('[', 'ESC', None, 'ELB')
+ # ELB means Escape Left Bracket. That is ^[[
+ self.state.add_transition ('H', 'ELB', DoHomeOrigin, 'INIT')
+ self.state.add_transition ('D', 'ELB', DoBackOne, 'INIT')
+ self.state.add_transition ('B', 'ELB', DoDownOne, 'INIT')
+ self.state.add_transition ('C', 'ELB', DoForwardOne, 'INIT')
+ self.state.add_transition ('A', 'ELB', DoUpOne, 'INIT')
+ self.state.add_transition ('J', 'ELB', DoEraseDown, 'INIT')
+ self.state.add_transition ('K', 'ELB', DoEraseEndOfLine, 'INIT')
+ self.state.add_transition ('r', 'ELB', DoEnableScroll, 'INIT')
+ self.state.add_transition ('m', 'ELB', None, 'INIT')
+ self.state.add_transition ('?', 'ELB', None, 'MODECRAP')
+ self.state.add_transition_list (string.digits, 'ELB', StartNumber, 'NUMBER_1')
+ self.state.add_transition_list (string.digits, 'NUMBER_1', BuildNumber, 'NUMBER_1')
+ self.state.add_transition ('D', 'NUMBER_1', DoBack, 'INIT')
+ self.state.add_transition ('B', 'NUMBER_1', DoDown, 'INIT')
+ self.state.add_transition ('C', 'NUMBER_1', DoForward, 'INIT')
+ self.state.add_transition ('A', 'NUMBER_1', DoUp, 'INIT')
+ self.state.add_transition ('J', 'NUMBER_1', DoErase, 'INIT')
+ self.state.add_transition ('K', 'NUMBER_1', DoEraseLine, 'INIT')
+ self.state.add_transition ('l', 'NUMBER_1', DoMode, 'INIT')
+ ### It gets worse... the 'm' code can have infinite number of
+ ### number;number;number before it. I've never seen more than two,
+ ### but the specs say it's allowed. crap!
+ self.state.add_transition ('m', 'NUMBER_1', None, 'INIT')
+ ### LED control. Same problem as 'm' code.
+ self.state.add_transition ('q', 'NUMBER_1', None, 'INIT')
+
+ # \E[?47h appears to be "switch to alternate screen"
+ # \E[?47l restores alternate screen... I think.
+ self.state.add_transition_list (string.digits, 'MODECRAP', StartNumber, 'MODECRAP_NUM')
+ self.state.add_transition_list (string.digits, 'MODECRAP_NUM', BuildNumber, 'MODECRAP_NUM')
+ self.state.add_transition ('l', 'MODECRAP_NUM', None, 'INIT')
+ self.state.add_transition ('h', 'MODECRAP_NUM', None, 'INIT')
+
+#RM Reset Mode Esc [ Ps l none
+ self.state.add_transition (';', 'NUMBER_1', None, 'SEMICOLON')
+ self.state.add_transition_any ('SEMICOLON', Log, 'INIT')
+ self.state.add_transition_list (string.digits, 'SEMICOLON', StartNumber, 'NUMBER_2')
+ self.state.add_transition_list (string.digits, 'NUMBER_2', BuildNumber, 'NUMBER_2')
+ self.state.add_transition_any ('NUMBER_2', Log, 'INIT')
+ self.state.add_transition ('H', 'NUMBER_2', DoHome, 'INIT')
+ self.state.add_transition ('f', 'NUMBER_2', DoHome, 'INIT')
+ self.state.add_transition ('r', 'NUMBER_2', DoScrollRegion, 'INIT')
+ ### It gets worse... the 'm' code can have infinite number of
+ ### number;number;number before it. I've never seen more than two,
+ ### but the specs say it's allowed. crap!
+ self.state.add_transition ('m', 'NUMBER_2', None, 'INIT')
+ ### LED control. Same problem as 'm' code.
+ self.state.add_transition ('q', 'NUMBER_2', None, 'INIT')
+
+ def process (self, c):
+
+ self.state.process(c)
+
+ def process_list (self, l):
+
+ self.write(l)
+
+ def write (self, s):
+
+ for c in s:
+ self.process(c)
+
+ def flush (self):
+
+ pass
+
+ def write_ch (self, ch):
+
+ """This puts a character at the current cursor position. cursor
+ position if moved forward with wrap-around, but no scrolling is done if
+ the cursor hits the lower-right corner of the screen. """
+
+ #\r and \n both produce a call to crlf().
+ ch = ch[0]
+
+ if ch == '\r':
+ # self.crlf()
+ return
+ if ch == '\n':
+ self.crlf()
+ return
+ if ch == chr(screen.BS):
+ self.cursor_back()
+ self.put_abs(self.cur_r, self.cur_c, ' ')
+ return
+
+ if ch not in string.printable:
+ fout = open ('log', 'a')
+ fout.write ('Nonprint: ' + str(ord(ch)) + '\n')
+ fout.close()
+ return
+ self.put_abs(self.cur_r, self.cur_c, ch)
+ old_r = self.cur_r
+ old_c = self.cur_c
+ self.cursor_forward()
+ if old_c == self.cur_c:
+ self.cursor_down()
+ if old_r != self.cur_r:
+ self.cursor_home (self.cur_r, 1)
+ else:
+ self.scroll_up ()
+ self.cursor_home (self.cur_r, 1)
+ self.erase_line()
+
+# def test (self):
+#
+# import sys
+# write_text = 'I\'ve got a ferret sticking up my nose.\n' + \
+# '(He\'s got a ferret sticking up his nose.)\n' + \
+# 'How it got there I can\'t tell\n' + \
+# 'But now it\'s there it hurts like hell\n' + \
+# 'And what is more it radically affects my sense of smell.\n' + \
+# '(His sense of smell.)\n' + \
+# 'I can see a bare-bottomed mandril.\n' + \
+# '(Slyly eyeing his other nostril.)\n' + \
+# 'If it jumps inside there too I really don\'t know what to do\n' + \
+# 'I\'ll be the proud posessor of a kind of nasal zoo.\n' + \
+# '(A nasal zoo.)\n' + \
+# 'I\'ve got a ferret sticking up my nose.\n' + \
+# '(And what is worst of all it constantly explodes.)\n' + \
+# '"Ferrets don\'t explode," you say\n' + \
+# 'But it happened nine times yesterday\n' + \
+# 'And I should know for each time I was standing in the way.\n' + \
+# 'I\'ve got a ferret sticking up my nose.\n' + \
+# '(He\'s got a ferret sticking up his nose.)\n' + \
+# 'How it got there I can\'t tell\n' + \
+# 'But now it\'s there it hurts like hell\n' + \
+# 'And what is more it radically affects my sense of smell.\n' + \
+# '(His sense of smell.)'
+# self.fill('.')
+# self.cursor_home()
+# for c in write_text:
+# self.write_ch (c)
+# print str(self)
+#
+#if __name__ == '__main__':
+# t = ANSI(6,65)
+# t.test()
Added: lldb/trunk/test/pexpect-2.4/FSM.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/FSM.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/FSM.py (added)
+++ lldb/trunk/test/pexpect-2.4/FSM.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,331 @@
+#!/usr/bin/env python
+
+"""This module implements a Finite State Machine (FSM). In addition to state
+this FSM also maintains a user defined "memory". So this FSM can be used as a
+Push-down Automata (PDA) since a PDA is a FSM + memory.
+
+The following describes how the FSM works, but you will probably also need to
+see the example function to understand how the FSM is used in practice.
+
+You define an FSM by building tables of transitions. For a given input symbol
+the process() method uses these tables to decide what action to call and what
+the next state will be. The FSM has a table of transitions that associate:
+
+ (input_symbol, current_state) --> (action, next_state)
+
+Where "action" is a function you define. The symbols and states can be any
+objects. You use the add_transition() and add_transition_list() methods to add
+to the transition table. The FSM also has a table of transitions that
+associate:
+
+ (current_state) --> (action, next_state)
+
+You use the add_transition_any() method to add to this transition table. The
+FSM also has one default transition that is not associated with any specific
+input_symbol or state. You use the set_default_transition() method to set the
+default transition.
+
+When an action function is called it is passed a reference to the FSM. The
+action function may then access attributes of the FSM such as input_symbol,
+current_state, or "memory". The "memory" attribute can be any object that you
+want to pass along to the action functions. It is not used by the FSM itself.
+For parsing you would typically pass a list to be used as a stack.
+
+The processing sequence is as follows. The process() method is given an
+input_symbol to process. The FSM will search the table of transitions that
+associate:
+
+ (input_symbol, current_state) --> (action, next_state)
+
+If the pair (input_symbol, current_state) is found then process() will call the
+associated action function and then set the current state to the next_state.
+
+If the FSM cannot find a match for (input_symbol, current_state) it will then
+search the table of transitions that associate:
+
+ (current_state) --> (action, next_state)
+
+If the current_state is found then the process() method will call the
+associated action function and then set the current state to the next_state.
+Notice that this table lacks an input_symbol. It lets you define transitions
+for a current_state and ANY input_symbol. Hence, it is called the "any" table.
+Remember, it is always checked after first searching the table for a specific
+(input_symbol, current_state).
+
+For the case where the FSM did not match either of the previous two cases the
+FSM will try to use the default transition. If the default transition is
+defined then the process() method will call the associated action function and
+then set the current state to the next_state. This lets you define a default
+transition as a catch-all case. You can think of it as an exception handler.
+There can be only one default transition.
+
+Finally, if none of the previous cases are defined for an input_symbol and
+current_state then the FSM will raise an exception. This may be desirable, but
+you can always prevent this just by defining a default transition.
+
+Noah Spurrier 20020822
+"""
+
+class ExceptionFSM(Exception):
+
+ """This is the FSM Exception class."""
+
+ def __init__(self, value):
+ self.value = value
+
+ def __str__(self):
+ return `self.value`
+
+class FSM:
+
+ """This is a Finite State Machine (FSM).
+ """
+
+ def __init__(self, initial_state, memory=None):
+
+ """This creates the FSM. You set the initial state here. The "memory"
+ attribute is any object that you want to pass along to the action
+ functions. It is not used by the FSM. For parsing you would typically
+ pass a list to be used as a stack. """
+
+ # Map (input_symbol, current_state) --> (action, next_state).
+ self.state_transitions = {}
+ # Map (current_state) --> (action, next_state).
+ self.state_transitions_any = {}
+ self.default_transition = None
+
+ self.input_symbol = None
+ self.initial_state = initial_state
+ self.current_state = self.initial_state
+ self.next_state = None
+ self.action = None
+ self.memory = memory
+
+ def reset (self):
+
+ """This sets the current_state to the initial_state and sets
+ input_symbol to None. The initial state was set by the constructor
+ __init__(). """
+
+ self.current_state = self.initial_state
+ self.input_symbol = None
+
+ def add_transition (self, input_symbol, state, action=None, next_state=None):
+
+ """This adds a transition that associates:
+
+ (input_symbol, current_state) --> (action, next_state)
+
+ The action may be set to None in which case the process() method will
+ ignore the action and only set the next_state. The next_state may be
+ set to None in which case the current state will be unchanged.
+
+ You can also set transitions for a list of symbols by using
+ add_transition_list(). """
+
+ if next_state is None:
+ next_state = state
+ self.state_transitions[(input_symbol, state)] = (action, next_state)
+
+ def add_transition_list (self, list_input_symbols, state, action=None, next_state=None):
+
+ """This adds the same transition for a list of input symbols.
+ You can pass a list or a string. Note that it is handy to use
+ string.digits, string.whitespace, string.letters, etc. to add
+ transitions that match character classes.
+
+ The action may be set to None in which case the process() method will
+ ignore the action and only set the next_state. The next_state may be
+ set to None in which case the current state will be unchanged. """
+
+ if next_state is None:
+ next_state = state
+ for input_symbol in list_input_symbols:
+ self.add_transition (input_symbol, state, action, next_state)
+
+ def add_transition_any (self, state, action=None, next_state=None):
+
+ """This adds a transition that associates:
+
+ (current_state) --> (action, next_state)
+
+ That is, any input symbol will match the current state.
+ The process() method checks the "any" state associations after it first
+ checks for an exact match of (input_symbol, current_state).
+
+ The action may be set to None in which case the process() method will
+ ignore the action and only set the next_state. The next_state may be
+ set to None in which case the current state will be unchanged. """
+
+ if next_state is None:
+ next_state = state
+ self.state_transitions_any [state] = (action, next_state)
+
+ def set_default_transition (self, action, next_state):
+
+ """This sets the default transition. This defines an action and
+ next_state if the FSM cannot find the input symbol and the current
+ state in the transition list and if the FSM cannot find the
+ current_state in the transition_any list. This is useful as a final
+ fall-through state for catching errors and undefined states.
+
+ The default transition can be removed by setting the attribute
+ default_transition to None. """
+
+ self.default_transition = (action, next_state)
+
+ def get_transition (self, input_symbol, state):
+
+ """This returns (action, next state) given an input_symbol and state.
+ This does not modify the FSM state, so calling this method has no side
+ effects. Normally you do not call this method directly. It is called by
+ process().
+
+ The sequence of steps to check for a defined transition goes from the
+ most specific to the least specific.
+
+ 1. Check state_transitions[] that match exactly the tuple,
+ (input_symbol, state)
+
+ 2. Check state_transitions_any[] that match (state)
+ In other words, match a specific state and ANY input_symbol.
+
+ 3. Check if the default_transition is defined.
+ This catches any input_symbol and any state.
+ This is a handler for errors, undefined states, or defaults.
+
+ 4. No transition was defined. If we get here then raise an exception.
+ """
+
+ if self.state_transitions.has_key((input_symbol, state)):
+ return self.state_transitions[(input_symbol, state)]
+ elif self.state_transitions_any.has_key (state):
+ return self.state_transitions_any[state]
+ elif self.default_transition is not None:
+ return self.default_transition
+ else:
+ raise ExceptionFSM ('Transition is undefined: (%s, %s).' %
+ (str(input_symbol), str(state)) )
+
+ def process (self, input_symbol):
+
+ """This is the main method that you call to process input. This may
+ cause the FSM to change state and call an action. This method calls
+ get_transition() to find the action and next_state associated with the
+ input_symbol and current_state. If the action is None then the action
+ is not called and only the current state is changed. This method
+ processes one complete input symbol. You can process a list of symbols
+ (or a string) by calling process_list(). """
+
+ self.input_symbol = input_symbol
+ (self.action, self.next_state) = self.get_transition (self.input_symbol, self.current_state)
+ if self.action is not None:
+ self.action (self)
+ self.current_state = self.next_state
+ self.next_state = None
+
+ def process_list (self, input_symbols):
+
+ """This takes a list and sends each element to process(). The list may
+ be a string or any iterable object. """
+
+ for s in input_symbols:
+ self.process (s)
+
+##############################################################################
+# The following is an example that demonstrates the use of the FSM class to
+# process an RPN expression. Run this module from the command line. You will
+# get a prompt > for input. Enter an RPN Expression. Numbers may be integers.
+# Operators are * / + - Use the = sign to evaluate and print the expression.
+# For example:
+#
+# 167 3 2 2 * * * 1 - =
+#
+# will print:
+#
+# 2003
+##############################################################################
+
+import sys, os, traceback, optparse, time, string
+
+#
+# These define the actions.
+# Note that "memory" is a list being used as a stack.
+#
+
+def BeginBuildNumber (fsm):
+ fsm.memory.append (fsm.input_symbol)
+
+def BuildNumber (fsm):
+ s = fsm.memory.pop ()
+ s = s + fsm.input_symbol
+ fsm.memory.append (s)
+
+def EndBuildNumber (fsm):
+ s = fsm.memory.pop ()
+ fsm.memory.append (int(s))
+
+def DoOperator (fsm):
+ ar = fsm.memory.pop()
+ al = fsm.memory.pop()
+ if fsm.input_symbol == '+':
+ fsm.memory.append (al + ar)
+ elif fsm.input_symbol == '-':
+ fsm.memory.append (al - ar)
+ elif fsm.input_symbol == '*':
+ fsm.memory.append (al * ar)
+ elif fsm.input_symbol == '/':
+ fsm.memory.append (al / ar)
+
+def DoEqual (fsm):
+ print str(fsm.memory.pop())
+
+def Error (fsm):
+ print 'That does not compute.'
+ print str(fsm.input_symbol)
+
+def main():
+
+ """This is where the example starts and the FSM state transitions are
+ defined. Note that states are strings (such as 'INIT'). This is not
+ necessary, but it makes the example easier to read. """
+
+ f = FSM ('INIT', []) # "memory" will be used as a stack.
+ f.set_default_transition (Error, 'INIT')
+ f.add_transition_any ('INIT', None, 'INIT')
+ f.add_transition ('=', 'INIT', DoEqual, 'INIT')
+ f.add_transition_list (string.digits, 'INIT', BeginBuildNumber, 'BUILDING_NUMBER')
+ f.add_transition_list (string.digits, 'BUILDING_NUMBER', BuildNumber, 'BUILDING_NUMBER')
+ f.add_transition_list (string.whitespace, 'BUILDING_NUMBER', EndBuildNumber, 'INIT')
+ f.add_transition_list ('+-*/', 'INIT', DoOperator, 'INIT')
+
+ print
+ print 'Enter an RPN Expression.'
+ print 'Numbers may be integers. Operators are * / + -'
+ print 'Use the = sign to evaluate and print the expression.'
+ print 'For example: '
+ print ' 167 3 2 2 * * * 1 - ='
+ inputstr = raw_input ('> ')
+ f.process_list(inputstr)
+
+if __name__ == '__main__':
+ try:
+ start_time = time.time()
+ parser = optparse.OptionParser(formatter=optparse.TitledHelpFormatter(), usage=globals()['__doc__'], version='$Id: FSM.py 490 2007-12-07 15:46:24Z noah $')
+ parser.add_option ('-v', '--verbose', action='store_true', default=False, help='verbose output')
+ (options, args) = parser.parse_args()
+ if options.verbose: print time.asctime()
+ main()
+ if options.verbose: print time.asctime()
+ if options.verbose: print 'TOTAL TIME IN MINUTES:',
+ if options.verbose: print (time.time() - start_time) / 60.0
+ sys.exit(0)
+ except KeyboardInterrupt, e: # Ctrl-C
+ raise e
+ except SystemExit, e: # sys.exit()
+ raise e
+ except Exception, e:
+ print 'ERROR, UNEXPECTED EXCEPTION'
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
Added: lldb/trunk/test/pexpect-2.4/INSTALL
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/INSTALL?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/INSTALL (added)
+++ lldb/trunk/test/pexpect-2.4/INSTALL Fri Mar 11 14:13:06 2011
@@ -0,0 +1,31 @@
+Installation
+------------
+This is a standard Python Distutil distribution. To install simply run:
+
+ python setup.py install
+
+This makes Pexpect available to any script on the machine. You need
+root access to install it this way. If you do not have root access or
+if you do not wish to install Pexpect so that is available to any script
+then you can just copy the pexpect.py file to same directory as your script.
+
+Trouble on Debian and Ubuntu
+----------------------------
+For some stupid reason Debian Linux does not include the distutils module
+in the standard 'python' package. Instead, the distutils module is packaged
+separately in the 'python-dev' package. So to add distutils back
+into Python, simply use aptitude or apt-get to install 'python-dev'.
+As root, run this command:
+ apt-get install python-dev
+Why they do this is mysterious because:
+ - It breaks the Python model of "batteries included".
+ 'distutils' isn't an extra or optional module --
+ it's parts of the Standard Python Library.
+ - The Debian 'python-dev' package is a microscopic 50K installed.
+ So what are they saving?
+ - Distutils is not only interesting to developers. Many non-development
+ oriented Python packages use 'distutils' to install applications.
+ - As far as I can tell, the package maintainers must go through
+ more trouble to remove 'distutils' from the standard Python
+ distribution than it would take just to leave it in.
+
Added: lldb/trunk/test/pexpect-2.4/LICENSE
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/LICENSE?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/LICENSE (added)
+++ lldb/trunk/test/pexpect-2.4/LICENSE Fri Mar 11 14:13:06 2011
@@ -0,0 +1,21 @@
+Free, open source, and all that good stuff.
+Pexpect Copyright (c) 2008 Noah Spurrier
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
Added: lldb/trunk/test/pexpect-2.4/PKG-INFO
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/PKG-INFO?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/PKG-INFO (added)
+++ lldb/trunk/test/pexpect-2.4/PKG-INFO Fri Mar 11 14:13:06 2011
@@ -0,0 +1,10 @@
+Metadata-Version: 1.0
+Name: pexpect
+Version: 2.4
+Summary: Pexpect is a pure Python Expect. It allows easy control of other applications.
+Home-page: http://pexpect.sourceforge.net/
+Author: Noah Spurrier
+Author-email: noah at noah.org
+License: MIT license
+Description: UNKNOWN
+Platform: UNIX
Added: lldb/trunk/test/pexpect-2.4/README
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/README?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/README (added)
+++ lldb/trunk/test/pexpect-2.4/README Fri Mar 11 14:13:06 2011
@@ -0,0 +1,45 @@
+Pexpect is a Pure Python Expect-like module
+
+Pexpect makes Python a better tool for controlling other applications.
+
+Pexpect is a pure Python module for spawning child applications; controlling
+them; and responding to expected patterns in their output. Pexpect works like
+Don Libes' Expect. Pexpect allows your script to spawn a child application and
+control it as if a human were typing commands.
+
+Pexpect can be used for automating interactive applications such as ssh, ftp,
+passwd, telnet, etc. It can be used to a automate setup scripts for
+duplicating software package installations on different servers. It can be
+used for automated software testing. Pexpect is in the spirit of Don Libes'
+Expect, but Pexpect is pure Python. Unlike other Expect-like modules for
+Python, Pexpect does not require TCL or Expect nor does it require C
+extensions to be compiled. It should work on any platform that supports the
+standard Python pty module. The Pexpect interface was designed to be easy to use.
+
+If you want to work with the development version of the source code then please
+read the DEVELOPERS document in the root of the source code tree.
+
+Free, open source, and all that good stuff.
+Pexpect Copyright (c) 2008 Noah Spurrier
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Noah Spurrier
+http://pexpect.sourceforge.net/
+
Added: lldb/trunk/test/pexpect-2.4/doc/clean.css
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/doc/clean.css?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/doc/clean.css (added)
+++ lldb/trunk/test/pexpect-2.4/doc/clean.css Fri Mar 11 14:13:06 2011
@@ -0,0 +1,103 @@
+
+body {
+ margin:0px;
+ padding:0px;
+ font-family:verdana, arial, helvetica, sans-serif;
+ color:#333;
+ background-color:white;
+ }
+pre {
+ background: #eeeeee;
+ border: 1px solid #888888;
+ color: black;
+ padding: 1em;
+ white-space: pre;
+}
+h1 {
+ margin:5px 0px 5px 0px;
+ padding:0px;
+ font-size:20px;
+ line-height:28px;
+ font-weight:900;
+ color:#44f;
+ }
+h2 {
+ margin:5px 0px 5px 0px;
+ padding:0px;
+ font-size:17px;
+ line-height:28px;
+ font-weight:900;
+ color:#226;
+ }
+h3 {
+ margin:5px 0px 5px 0px;
+ padding:0px;
+ font-size:15px;
+ line-height:28px;
+ font-weight:900;
+ }
+p
+{
+ margin:0px 0px 16px 0px;
+ font:11px/20px verdana, arial, helvetica, sans-serif;
+ padding:0px;
+}
+table
+{
+ font-size: 10pt;
+ color: #000000;
+}
+td{border:1px solid #999;}
+
+table.pymenu {color: #000000; background-color: #99ccff}
+th.pymenu {color: #ffffff; background-color: #003366}
+
+.code
+{
+ font-family: "Lucida Console", monospace; font-weight: bold;
+ color: #007700; background-color: #eeeeee
+}
+
+#Content>p {margin:0px;}
+#Content>p+p {text-indent:30px;}
+
+a {
+ text-decoration:none;
+ font-weight:600;
+ font-family:verdana, arial, helvetica, sans-serif;
+ color: #900;
+}
+//a:link {color:#09c;}
+//a x:visited {color:#07a;}
+a:hover {background-color:#ee0;}
+
+#Header {
+ margin:10px 0px 10px 0px;
+ padding:10px 0px 10px 20px;
+ /* For IE5/Win's benefit height = [correct height] + [top padding] + [top and bottom border widths] */
+ height:33px; /* 14px + 17px + 2px = 33px */
+ border-style:solid;
+ border-color:black;
+ border-width:1px 0px; /* top and bottom borders: 1px; left and right borders: 0px */
+ line-height:33px;
+ background-color:#eee;
+ height:66px; /* the correct height */
+ }
+
+#Content {
+ margin:0px 210px 50px 10px;
+ padding:10px;
+ }
+
+#Menu {
+ position:absolute;
+ top:100px;
+ right:20px;
+ width:172px;
+ padding:10px;
+ background-color:#eee;
+ border:1px solid #999; // dashed #999;
+ line-height:17px;
+ width:150px;
+ font-size:11px;
+ }
Added: lldb/trunk/test/pexpect-2.4/doc/email.png
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/doc/email.png?rev=127484&view=auto
==============================================================================
Binary file - no diff available.
Propchange: lldb/trunk/test/pexpect-2.4/doc/email.png
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added: lldb/trunk/test/pexpect-2.4/doc/examples.html
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/doc/examples.html?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/doc/examples.html (added)
+++ lldb/trunk/test/pexpect-2.4/doc/examples.html Fri Mar 11 14:13:06 2011
@@ -0,0 +1,135 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>Pexpect - Examples</title>
+<link rel="stylesheet" href="clean.css" type="text/css">
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta name="Author" content="Noah Spurrier">
+<meta name="Keywords"
+ content="pexpect, Noah Spurrier, Python, Libes, TCL, Expect, pipe, popen, pyExpect, expectpy, expect-like, expect-alike, expect like">
+<meta name="Description" content="Examples for using Pexpect.">
+</head>
+<body bgcolor="#ffffff" text="#000000">
+<div id="Header">
+<h1>Pexpect Examples</h1>
+</div>
+<div id="Content">
+
+<p><span class="code">hive.py</span></p>
+<p><blockquote>
+This script creates SSH connections to a list of hosts that
+you provide. Then you are given a command line prompt. Each
+shell command that you enter is sent to all the hosts. The
+response from each host is collected and printed. For example,
+you could connect to a dozen different machines and reboot
+them all at once.
+</p></blockquote>
+
+<p><span class="code">script.py</span></p>
+<p><blockquote>
+ This implements a command similar to the classic BSD
+"script" command.
+ This will start a subshell and log all input and
+output to a file.
+ This demonstrates the interact() method of Pexpect.
+</p></blockquote>
+
+<p><span class="code">fix_cvs_files.py</span></p>
+<p><blockquote>
+ This is for cleaning up binary files improperly
+added to CVS.
+ This script scans the given path to find binary
+files;
+ checks with CVS to see if the sticky options are set
+to -kb;
+ finally if sticky options are not -kb then uses 'cvs
+admin' to
+ set the -kb option.
+</p></blockquote>
+
+<p><span class="code">ftp.py</span></p>
+<p><blockquote>
+ This demonstrates an FTP "bookmark".
+ This connects to an ftp site; does a few ftp stuff;
+and then gives the user
+ interactive control over the session. In this case
+the "bookmark" is to a
+ directory on the OpenBSD ftp server. It puts you in
+the i386 packages
+ directory. You can easily modify this for other
+sites.
+ This demonstrates the interact() method of Pexpect.
+</p></blockquote>
+
+<p><span class="code">monitor.py</span></p>
+<p><blockquote>
+ This runs a sequence of commands on a remote host
+using SSH.
+ It runs a simple system checks such as uptime and
+free to monitor
+ the state of the remote host.
+</p></blockquote>
+
+<p><span class="code">passmass.py</span></p>
+<p><blockquote>
+ This will login to each given server and change the
+password of the
+ given user. This demonstrates scripting logins and
+passwords.
+</p></blockquote>
+
+<p><span class="code">python.py</span></p>
+<p><blockquote>
+ This starts the python interpreter and prints the
+greeting message backwards.
+ It then gives the user iteractive control of Python.
+It's pretty useless!
+</p></blockquote>
+
+<p><span class="code">rippy.py</span></p>
+<p><blockquote>
+ This is a wizard for mencoder. It greatly simplifies
+the process of
+ ripping a DVD to Divx (mpeg4) format. It can
+transcode from any
+ video file to another. It has options for resampling
+the audio stream;
+ removing interlace artifacts, fitting to a target
+file size, etc.
+ There are lots of options, but the process is simple
+and easy to use.
+</p></blockquote>
+
+<p><span class="code">sshls.py</span></p>
+<p><blockquote>
+ This lists a directory on a remote machine.
+</p></blockquote>
+<p><span class="code">ssh_tunnel.py</span></p>
+<p><blockquote>
+ This starts an SSH tunnel to a remote machine. It
+monitors the connection
+ and restarts the tunnel if it goes down.
+</p></blockquote>
+<p><span class="code">uptime.py</span></p>
+<p><blockquote>
+ This will run the uptime command and parse the
+output into variables.
+ This demonstrates using a single regular expression
+to match the output
+ of a command and capturing different variable in
+match groups.
+ The grouping regular expression handles a wide variety of different
+uptime formats.
+ </blockquote>
+
+<p>
+<a href="http://sourceforge.net/projects/pexpect/"
+ title="The Pexpect project page on SourceForge.net"> <img
+ src="http://sourceforge.net/sflogo.php?group_id=59762&type=5"
+ alt="The Pexpect project page on SourceForge.net" border="0"
+ height="31" width="105"> </a>
+</p>
+</div>
+
+</body>
+</html>
Added: lldb/trunk/test/pexpect-2.4/doc/index.html
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/doc/index.html?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/doc/index.html (added)
+++ lldb/trunk/test/pexpect-2.4/doc/index.html Fri Mar 11 14:13:06 2011
@@ -0,0 +1,868 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>Pexpect - a Pure Python Expect-like module</title>
+<link rel="stylesheet" href="clean.css" type="text/css">
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta name="Author" content="Noah Spurrier">
+<meta name="Keywords"
+ content="pexpect, Noah Spurrier, pypect, Python, Libes, TCL, Expect, pipe, popen, pyExpect, expectpy, expect-like, expect-alike, expect like">
+<meta name="Description"
+ content="Pexpect is a pure Python Expect-like module. Pexpect makes Python a better tool for controlling other applications.">
+</head>
+<body bgcolor="#ffffff" text="#000000">
+<div id="Header">
+<h1>Pexpect version 2.4<br>
+a Pure Python Expect-like module
+</h1>
+</div>
+<div id="Content">
+<p>Pexpect makes Python a better tool for controlling other
+applications.</p>
+<p>Pexpect is a pure Python module for spawning child applications;
+controlling them; and responding to expected patterns in their output.
+Pexpect works like Don Libes' Expect. Pexpect allows your script to
+spawn a child application and control it as if a human were typing
+commands.</p>
+<p>Pexpect can be used for automating interactive applications such as
+ssh, ftp, passwd, telnet, etc. It can be used to a automate setup
+scripts for duplicating software package installations on different
+servers. It can be used for automated software testing. Pexpect is in
+the spirit of Don Libes' Expect, but Pexpect is pure Python. Unlike
+other Expect-like modules for Python, Pexpect does not require TCL or
+Expect nor does it require C extensions to be compiled. It should work
+on any platform that supports the standard Python pty module. The
+Pexpect interface was designed to be easy to use.</p>
+<table border="0">
+ <tbody>
+ <tr>
+ <td align="right" valign="top">Send questions to:</td>
+ <td align="left"><a href="http://www.noah.org/email/"><img
+ src="email.png" alt="Click to send email." border="0" height="16"
+ width="100"></a></td>
+ </tr>
+ </tbody>
+</table>
+<hr noshade="noshade" size="1">
+<h1><a name="license"></a>License: MIT style</h1>
+<p>
+Free, open source, and all that good stuff.<br>
+<br>
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:<br>
+<br>
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.<br>
+<br>
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.<br>
+<br>
+Pexpect Copyright (c) 2008 Noah Spurrier<br>
+http://pexpect.sourceforge.net/
+</p>
+
+<hr noshade="noshade" size="1">
+<h1><a name="download"></a><a
+ href="http://sourceforge.net/project/showfiles.php?group_id=59762">Download</a></h1>
+<p>Download the <a
+ href="http://sourceforge.net/project/showfiles.php?group_id=59762">
+current version here</a> from the SourceForge site. Grab the current Pexpect tarball.
+</p>
+<h2>Installing Pexpect</h2>
+<p>The Pexpect tarball is a standard Python Distutil distribution.</p>
+<ol>
+ <li>download <span class="code">pexpect-2.4.tar.gz</span></li>
+ <li><span class="code">tar zxf pexpect-2.4.tar.gz</span></li>
+ <li><span class="code">cd pexpect-2.4</span></li>
+ <li><span class="code">python setup.py install</span> <i>do this as root</i></li>
+</ol>
+<h2>Examples</h2>
+<p>
+Under the <span class="code">pexpect-2.4</span> directory you should find
+the <span class="code">examples</span> directory.
+This is the best way to learn to use Pexpect.
+See the descriptions of <a href="examples.html">Pexpect Examples</a>.
+</p>
+<h2><a name="doc"></a>API Documentation</h2>
+<p>
+<blockquote>
+<a href="pexpect.html">pexpect</a> This is the main module that you want.<br>
+<a href="pxssh.html">pxssh</a> Pexpect SSH is an extension of 'pexpect.spawn' that specializes in SSH.<br>
+</blockquote>
+the following are experimental extensions to Pexpect<br>
+<blockquote>
+<a href="fdpexpect.html">fdpexpect</a> fdpexpect extension of 'pexpect.spawn' that uses an open file descriptor.<br>
+<a href="screen.html">SCREEN</a> This represents a virtual 'screen'.<br>
+<a href="ANSI.html">ANSI</a> This parses ANSI/VT-100 terminal escape codes.<br>
+<a href="FSM.html">FSM</a> This is a finite state machine used by ANSI.<br>
+</blockquote>
+</p>
+<hr noshade="noshade" size="1">
+<h1><a name="status"></a>Project Status</h1>
+<p>Automated pyunit tests reach over 80%
+code coverage on pexpect.py. I regularly test on Linux and BSD
+platforms. I try to test on Solaris and Irix.
+</p>
+<hr noshade="noshade" size="1">
+<h1><a name="requirements"></a>Requirements for use of Pexpect</h1>
+<h2>Python</h2>
+<blockquote>
+ <p>Pexpect was written and tested with Python 2.4. It should work on
+earlier versions that have the <span class="code">pty</span> module. I
+sometimes even manually test it with Python 1.5.2, but I can't easily
+run the PyUnit test framework against Python 1.5.2, so I have less
+confidence in Pexpect on Python 1.5.2.</p>
+</blockquote>
+<h2>pty module</h2>
+<blockquote>
+ <p>Any POSIX system (UNIX) with a working <span class="code">pty</span>
+module should be able to run Pexpect. The <span class="code">pty</span>
+module is part of the Standard Python Library, so if you are running on
+a POSIX system you should have it. The <span class="code">pty</span>
+module does not run the same on all platforms. It should be solid on Linux
+and BSD systems. I have taken effort to try to smooth the wrinkles out of the different platforms. To learn more
+about the wrinkles see <a href="#bugs">Bugs</a> and <a href="#testing">Testing</a>.</p>
+</blockquote>
+<p>Pexpect does not currently work on the standard Windows Python (see
+the pty requirement); however, it seems to work fine using <a
+ href="http://www.cygwin.com/">Cygwin</a>. It is possible to build
+something like a pty for Windows, but it would have to use a different
+technique that I am still investigating. I know it's possible because
+Libes' Expect was ported to Windows. <i>If you have any ideas or
+skills to contribute in this area then I would really appreciate some
+tips on how to approach this problem.</i> </p>
+<hr noshade="noshade" size="1">
+<h1><a name="overview"></a>Overview</h1>
+<p>Pexpect can be used for automating interactive applications such as
+ssh, ftp, mencoder, passwd, etc. The Pexpect interface was designed to be
+easy to use. Here is an example of Pexpect in action:</p>
+<blockquote>
+ <pre class="code"># This connects to the openbsd ftp site and<br># downloads the recursive directory listing.<br>import pexpect<br>child = pexpect.spawn ('ftp ftp.openbsd.org')<br>child.expect ('Name .*: ')<br>child.sendline ('anonymous')<br>child.expect ('Password:')<br>child.sendline ('noah at example.com')<br>child.expect ('ftp> ')<br>child.sendline ('cd pub')<br>child.expect('ftp> ')<br>child.sendline ('get ls-lR.gz')<br>child.expect('ftp> ')<br>child.sendline ('bye')<br></pre>
+</blockquote>
+<p> Obviously you could write an ftp client using Python's own <span
+ class="code">ftplib</span> module, but this is just a demonstration.
+You can use this technique with any application. This is especially
+handy if you are writing automated test tools.</p>
+
+<p>There are two important methods in Pexpect -- <span class="code"><b>expect()</b></span>
+and <span class="code"><b>send()</b></span> (or <span class="code">sendline()</span>
+which is like <span class="code">send()</span> with a linefeed).
+The <span class="code">expect()</span> method waits for the child application
+to return a given string. The string you specify is a regular expression, so
+you can match complicated patterns. The <span class="code"><b>send()</b></span> method
+writes a string to the child application. From the child's point of
+view it looks just like someone typed the text from a terminal. After
+each call to <span class="code"><b>expect()</b></span> the <span
+ class="code"><b>before</b></span> and <span class="code"><b>after</b></span>
+properties will be set to the text printed by child application. The <span
+ class="code"><b>before</b></span> property will contain all text up to
+the expected string pattern. The <span class="code"><b>after</b></span> string
+will contain the text that was matched by the expected pattern.
+The <span class="code">match</span> property is set to the <span class="code">re MatchObject</span>.
+</p>
+
+<p>An example of Pexpect in action may make things more clear. This example uses
+<span class="code">ftp</span> to login to the OpenBSD site; list files
+in a directory; and then pass interactive control of the ftp session to
+the human user.</p>
+<blockquote>
+ <pre class="code">import pexpect<br>child = pexpect.spawn ('ftp ftp.openbsd.org')<br>child.expect ('Name .*: ')<br>child.sendline ('anonymous')<br>child.expect ('Password:')<br>child.sendline ('noah at example.com')<br>child.expect ('ftp> ')<br>child.sendline ('ls /pub/OpenBSD/')<br>child.expect ('ftp> ')<br>print child.before # Print the result of the ls command.<br>child.interact() # Give control of the child to the user.<br></pre>
+</blockquote>
+<h2>Special EOF and TIMEOUT patterns</h2>
+<p>
+There are two special patterns to match the End Of File or a Timeout condition.
+You you can pass these patterns to <span class="code">expect()</span>.
+These patterns are not regular expressions. Use them like predefined constants.
+</p>
+<p>If the child has died and you have read all the child's output then ordinarily
+<span class="code">expect()</span> will raise an <span class="code">EOF</span>
+exception. You can read everything up to the EOF without generating an
+exception by using the EOF pattern <span class="code">expect(pexpect.EOF)</span>.
+In this case everything the child has output will be available in the <span
+ class="code">before</span> property.</p>
+<p>The pattern given to <span class="code">expect()</span> may be a
+regular expression or it may also be a <b>list</b> of regular expressions.
+This allows you to match multiple optional responses. The <span class="code">expect()</span>
+method returns the index of the pattern that was matched. For example,
+say you wanted to login to a server. After entering a password you
+could get various responses from the server -- your password could be
+rejected; or you could be allowed in and asked for your terminal type;
+or you could be let right in and given a command prompt. The following
+code fragment gives an example of this:</p>
+<blockquote>
+ <pre class="code">child.expect('password:')<br>child.sendline (my_secret_password)<br># We expect any of these three patterns...<br>i = child.expect (['Permission denied', 'Terminal type', '[#\$] '])<br>if i==0:<br> print 'Permission denied on host. Can't login'<br> child.kill(0)<br>elif i==2:<br> print 'Login OK... need to send terminal type.'<br> child.sendline('vt100')<br> child.expect ('[#\$] ')<br>elif i==3:<br> print 'Login OK.'<br> print 'Shell command prompt', child.after</pre>
+</blockquote>
+<p>If nothing matches an expected pattern then expect will eventually
+raise a TIMEOUT exception. The default time is 30 seconds, but you can
+change this by passing a timeout argument to expect():</p>
+<blockquote>
+ <pre class="code"># Wait no more than 2 minutes (120 seconds) for password prompt.<br>child.expect('password:', timeout=120)</pre>
+</blockquote>
+<h2>Find the end of line -- CR/LF conventions<br>
+Matching at the end of a line can be tricky<br>
+$ regex pattern is useless.<br>
+</h2>
+<p>Pexpect matches regular expressions a little differently than what
+you might be used to.
+</p>
+<p><i><b>The $ pattern for end of line match is useless</b></i>.
+The $ matches the end of string, but Pexpect reads from the child
+one character at a time, so each character looks like the end of a line.
+Pexpect can't do a look-ahead into the child's output stream.
+In general you would have this situation when using regular expressions
+with any stream.<br>
+<i>Note, pexpect does have an internal buffer, so reads are faster
+than one character at a time, but from the user's perspective the regex
+patterns test happens one character at a time.</i></p>
+<p>The best way to match the end of a line is to look for the
+newline: "\r\n" (CR/LF). Yes, that does appear to be DOS-style.
+It may surprise some UNIX people to learn that terminal TTY device drivers
+(dumb, vt100, ANSI, xterm, etc.) all use the CR/LF combination to signify
+the end of line. Pexpect uses a Pseudo-TTY device to talk to the child application, so
+when the child app prints "\n" you actually see "\r\n".
+</p>
+<p><b>UNIX uses just linefeeds to end lines of text, but not when it
+comes to TTY devices!</b> TTY devices are more like the Windows world.
+Each line of text end with a CR/LF combination. When you intercept data
+from a UNIX command from a TTY device you will find that the TTY device
+outputs a CR/LF combination. A UNIX command may only write a linefeed
+(\n), but the TTY device driver converts it to CR/LF. This means that
+your terminal will see lines end with CR/LF (hex <span class="code">0D 0A</span>).
+Since Pexpect emulates a terminal, to match ends of lines you have to
+expect the CR/LF combination.</p>
+<blockquote>
+ <p class="code">child.expect ('\r\n')</p>
+</blockquote>
+<p>If you just need to skip past a new line then <span class="code">expect
+('\n')</span> by itself will work, but if you are expecting a specific
+pattern before the end of line then you need to explicitly look for the
+\r. For example the following expects a word at the end of a line:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+\r\n')</p>
+</blockquote>
+<p>But the following would both fail:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+\n')</p>
+</blockquote>
+<p>And as explained before, trying to use '$' to match the end of line
+would not work either:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+$')</p>
+</blockquote>
+<p>So if you need to explicitly look for the END OF LINE, you want to
+look for the CR/LF combination -- not just the LF and not the $ pattern.</p>
+<p>This problem is not limited to Pexpect. This problem happens any
+time you try to perform a regular expression match on a stream. Regular
+expressions need to look ahead. With a stream it is hard to look ahead
+because the process generating the stream may not be finished. There is no
+way to know if the process has paused momentarily or is finished and
+waiting for you. <font color="#cc0000">Pexpect must implicitly always
+do a NON greedy match (minimal) at the end of a input {### already said
+this}.</font> </p>
+<p>Pexpect compiles all regular expressions with the DOTALL flag. With
+the DOTALL flag a "." will match a newline. See the Python <a
+ href="http://www.python.org/doc/current/lib/node115.html#l2h-733">documentation</a></p>
+<h2>Beware of + and * at the end of input.</h2>
+<p>Remember that any time you try to match a pattern that needs
+look-ahead that you will always get a minimal match (non greedy). For
+example, the following will always return just one character:</p>
+<blockquote>
+ <p class="code">child.expect ('.+')</p>
+</blockquote>
+<p>This example will match successfully, but will always return no
+characters:</p>
+<blockquote>
+ <p class="code">child.expect ('.*')</p>
+</blockquote>
+<p>Generally any star * expression will match as little as possible</p>
+<p>One thing you can do is to try to force a non-ambiguous character at
+the end of your <span class="code">\d+</span> pattern. Expect that
+character to delimit the string. For example, you might try making the
+end of your pattrn be <span class="code">\D+</span> instead of <span
+ class="code">\D*</span>. That means number digits alone would not
+satisfy the (<span class="code">\d+</span>) pattern. You would need
+some number(s) and at least one <span class="code">\D</span> at the
+end. </p>
+<h2>Matching groups</h2>
+<p>You can group regular expression using parenthesis. After a match,
+the <span class="code">match</span> parameter of the spawn object will
+contain the Python Match object. </p>
+<h2>Examples</h2>
+<p>Using "match" and groups...</p>
+<h2>Debugging</h2>
+<p>If you get the string value of a pexpect.spawn object you will get
+lots of useful debugging information. For debugging it's very useful to
+use the following pattern:</p>
+<p>try:<br>
+ i = child.expect ([pattern1, pattern2, pattern3,
+etc])<br>
+except:<br>
+ print "Exception was thrown"<br>
+ print "debug information:"<br>
+ print str(child)<br>
+</p>
+<p>It is also useful to log the child's input and out to a file or the
+screen. The following will turn on logging and send output to stdout
+(the screen).<br>
+</p>
+<p> child = pexpect.spawn (foo)<br>
+ child.logfile = sys.stdout<br>
+<br>
+</p>
+<hr noshade="noshade" size="1">
+<h1>Exceptions</h1>
+<p><b>EOF</b></p>
+<p>Note that two flavors of EOF Exception may be thrown. They are
+virtually identical except for the message string. For practical
+purposes you should have no need to distinguish between them, but they
+do give a little extra information about what type of platform you are
+running. The two messages are:</p>
+<blockquote>
+ <p class="code">End Of File (EOF) in read(). Exception style platform.</p>
+ <p class="code">End Of File (EOF) in read(). Empty string style
+platform.</p>
+</blockquote>
+<p>Some UNIX platforms will throw an exception when you try to read
+from a file descriptor in the EOF state. Other UNIX platforms instead
+quietly return an empty string to indicate that the EOF state has been
+reached.</p>
+<p><b>Expecting EOF</b></p>
+<p>If you wish to read up to the end of the child's output without
+generating an <span class="code">EOF</span> exception then use the <span
+ class="code">expect(pexpect.EOF)</span> method.</p>
+<p><b>TIMEOUT</b></p>
+<p>The <span class="code">expect()</span> and <span class="code">read()</span>
+methods will also timeout if the child does not generate any output for
+a given amount of time. If this happens they will raise a <span
+ class="code">TIMEOUT</span> exception. You can have these method
+ignore a timeout and block indefinitely by passing None for the timeout
+parameter.</p>
+<blockquote>
+ <p class="code">child.expect(pexpect.EOF, timeout=None)</p>
+</blockquote>
+<hr noshade="noshade" size="1">
+<h1><a name="faq"></a>FAQ</h1>
+<p><b>Q: Why don't shell pipe and redirect (| and >) work when I
+spawn a command?</b></p>
+<p>
+
+A: Remember that Pexpect does NOT interpret shell meta characters such as
+redirect, pipe, or wild cards (>, |, or *). That's done by a shell not the
+command you are spawning. This is a common mistake. If you want to run a
+command and pipe it through another command then you must also start a shell.
+For example:
+
+<pre>
+ child = pexpect.spawn('/bin/bash -c "ls -l | grep LOG > log_list.txt"')
+ child.expect(pexpect.EOF)
+</pre>
+
+The second form of spawn (where you pass a list of arguments) is useful in
+situations where you wish to spawn a command and pass it its own argument list.
+This can make syntax more clear. For example, the following is equivalent to
+the previous example:
+
+<pre>
+ shell_cmd = 'ls -l | grep LOG > log_list.txt'
+ child = pexpect.spawn ('/bin/bash', ['-c', shell_cmd])
+ child.expect (pexpect.EOF)
+</pre>
+
+</p>
+<p><b>Q: Isn't there already a Python Expect?</b></p>
+<p>A: Yes, there are several of them. They usually require you to
+compile C. I wanted something that was pure Python and preferably a
+single module that was simple to install. I also wanted something that
+was easy to use. This pure Python expect only recently became possible
+with the introduction of the pty module in the standard Python library.
+Previously C extensions were required.</p>
+
+<p><strong>Q: The before and after properties sound weird.</strong></p>
+<p>Originally I was going to model Pexpect more after Expect, but then
+I found that I could never remember how to get the context of the stuff
+I was trying to parse. I hate having to read my own documentation. I
+decided that it was easier for me to remember what before and after
+was. It just so happens that this is how the -B and -A options in grep
+works, so that made it even easier for me to remember. Whatever makes
+my life easier is what's best.</p>
+
+<p><b>Q: Why not just use Expect?</b></p>
+<p>A: I love it. It's great. I has bailed me out of some real jams, but
+I wanted something that would do 90% of what I need from Expect; be 10%
+of the size; and allow me to write my code in Python instead of TCL.
+Pexpect is not nearly as big as Expect, but Pexpect does everything I
+have ever used Expect for.
+<!-- :-P If I liked TCL then you wouldn't be reading this. My appologies to Don Libes -- Expect is cool, TK is cool, but TCL is only slightly better than Perl in my book. Hopefully after Expyct is done I will not need to use Expect anymore -- except for that lovely autoexpect tool. Damn, I wish I had that! --> </p>
+
+<p><b>Q: Why not just use a pipe (popen())?</b></p>
+<p>A: A pipe works fine for getting the output to non-interactive
+programs. If you just want to get the output from <span class="code">ls</span>,
+<span class="code">uname</span>, or <span class="code">ping</span>
+then this works. Pipes do not work very well for interactive programs
+and pipes will almost certainly fail for most applications that ask for
+passwords such as telnet, ftp, or ssh.</p>
+<p>There are two reasons for this. </p>
+<p>First an application may bypass stdout and print directly to its
+controlling TTY. Something like SSH will do this when it asks you for a
+password. This is why you cannot redirect the password prompt because
+it does not go through stdout or stderr.</p>
+<p>The second reason is because most applications are built using the C
+Standard IO Library (anything that uses <span class="code">#include
+<stdio.h></span>). One of the features of the stdio library is
+that it buffers all input and output. Normally output is <b><i>line
+buffered</i></b> when a program is printing to a TTY (your terminal
+screen). Every time the program prints a line-feed the currently
+buffered data will get printed to your screen. The problem comes when
+you connect a pipe. The stdio library is smart and can tell that it is
+printing to a pipe instead of a TTY. In that case it switches from line
+buffer mode to <i><b>block buffered</b></i>. In this mode the
+currently buffered data is flushed when the buffer is full. This causes
+most interactive programs to deadlock. Block buffering is more
+efficient when writing to disks and pipes. Take the situation where a
+program prints a message "Enter your user name:\n" and then waits for
+you type type something. In block buffered mode, the stdio library will
+not put the message into the pipe even though a linefeed is printed.
+The result is that you never receive the message, yet the child
+application will sit and wait for you to type a response. Don't confuse
+the stdio lib's buffer with the pipe's buffer. The pipe buffer is
+another area that can cause problems. You could flush the input side of
+a pipe, whereas you have no control over the stdio library buffer. </p>
+<p>More information: the Standard IO library has three states for a
+FILE *. These are: _IOFBF for block buffered; _IOLBF for line buffered;
+and _IONBF for unbuffered. The STDIO lib will use block buffering when
+talking to a block file descriptor such as a pipe. This is usually not
+helpful for interactive programs. Short of recompiling your program to
+include fflush() everywhere or recompiling a custom stdio library there
+is not much a controlling application can do about this if talking over
+a pipe.</p>
+<p> The program may have put data in its output that remains unflushed
+because the output buffer is not full; then the program will go and
+deadlock while waiting for input -- because you never send it any
+because you are still waiting for its output (still stuck in the
+STDIO's output buffer).</p>
+<p>The answer is to use a pseudo-tty. A TTY device will force <i><b>line</b></i>
+buffering (as opposed to block buffering). Line buffering means that
+you will get each line when the child program sends a line feed. This
+corresponds to the way most interactive programs operate -- send a line
+of output then wait for a line of input.</p>
+<p>I put "answer" in quotes because it's ugly solution and because
+there is no POSIX standard for pseudo-TTY devices (even though they
+have a TTY standard...). What would make more sense to me would be to
+have some way to set a mode on a file descriptor so that it will tell
+the STDIO to be line-buffered. I have investigated, and I don't think
+there is a way to set the buffered state of a child process. The STDIO
+Library does not maintain any external state in the kernel or whatnot,
+so I don't think there is any way for you to alter it. I'm not quite
+sure how this line-buffered/block-buffered state change happens
+internally in the STDIO library. I think the STDIO lib looks at the
+file descriptor and decides to change behavior based on whether it's a
+TTY or a block file (see isatty()).</p>
+<p>I hope that this qualifies as helpful.</p>
+
+<h1>Don't use a pipe to control another application...</h1>
+<p>Pexpect may seem similar to <span class="code">os.popen()</span> or
+<span class="code">commands</span> module. The main difference is that
+Pexpect (like Expect) uses a pseudo-TTY to talk to the child
+application. Most applications do no work well through the system()
+call or through pipes. And probably all applications that ask a user to
+type in a password will fail. These applications bypass the stdin and
+read directly from the TTY device. Many applications do not explicitly
+flush their output buffers. This causes deadlocks if you try to control
+an interactive application using a pipe. What happens is that most UNIX
+applications use the stdio (#include <stdio.h>) for input and
+output. The stdio library behaves differently depending on where the
+output is going. There is no way to control this behavior from the
+client end.<br>
+</p>
+
+<p><b>Q: Can I do screen scraping with this thing?</b></p>
+<p>A: That depends. If your application just does line-oriented output
+then this is easy. If it does screen-oriented output then it may work,
+but it could be hard. For example, trying to scrape data from the 'top'
+command would be hard. The top command repaints the text window. </p>
+<p>I am working on an ANSI / VT100 terminal emulator that will have
+methods to get characters from an arbitrary X,Y coordinate of the
+virtual screen. It works and you can play with it, but I have no
+working examples at this time.</p>
+<hr noshade="noshade" size="1">
+<h1><a name="bugs"></a>Bugs</h1>
+<h2>Threads</h2>
+<p>On Linux (RH 8) you cannot spawn a child from a different thread and
+pass the handle back to a worker thread. The child is successfully
+spawned but you can't interact with it. The only way to make it work is
+to spawn and interact with the child all in the same thread. [Adam
+Kerrison] </p>
+<h2><a name="echo_bug"></a>Timing issue with send() and sendline()</h2>
+<p>This problem has been addressed and should not effect most users.</p>
+<p>It is sometimes possible to read an echo of the string sent with <span
+ class="code">send()</span> and <span class="code">sendline()</span>.
+If you call <span class="code">sendline()</span> and then immediately
+call <span class="code">readline()</span> you may get part of your
+output echoed back. You may read back what you just wrote even if the
+child application does not explicitly echo it. Timing is critical. This
+could be a security issue when talking to an application that asks for
+a password; otherwise, this does not seem like a big deal. <i>But why
+do TTYs do this</i>?</p>
+<p>People usually report this when they are trying to control SSH or
+some other login. For example, if your code looks something like this: </p>
+<pre class="code">child.expect ('[pP]assword:')<br>child.sendline (my_password)</pre>
+<p><br>
+<blockquote>
+1. SSH prints "password:" prompt to the user.<br>
+2. SSH turns off echo on the TTY device.<br>
+3. SSH waits for user to enter a password.<br>
+</blockquote>
+When scripting with Pexpect what can happen is that Pexpect will response to the "password:" prompt
+before SSH has had time to turn off TTY echo. In other words, Pexpect sends the password between
+steps 1. and 2., so the password gets echoed back to the TTY. I would call this an SSH bug.
+</p>
+<p>
+Pexpect now automatically adds a short delay before sending data to a child process.
+This more closely mimics what happens in the usual human-to-app interaction.
+The delay can be tuned with the 'delaybeforesend' attribute of the spawn class.
+In general, this fixes the problem for everyone and so this should not be an issue
+for most users. For some applications you might with to turn it off.
+ child = pexpect.spawn ("ssh user at example.com")
+ child.delaybeforesend = 0
+</p>
+<p><br>
+</p>
+<p>Try changing it to look like the following. I know that this fix
+does not look correct, but it works. I have not figured out exactly
+what is happening. You would think that the sleep should be after the
+sendline(). The fact that the sleep helps when it's between the
+expect() and the sendline() must be a clue.</p>
+<pre class="code">child.expect ('[pP]assword:')<br>child.sendline (my_password)</pre>
+<h2>Timing issue with isalive()</h2>
+<p>Reading the state of isalive() immediately after a child exits may
+sometimes return 1. This is a race condition. The child has closed its
+file descriptor, but has not yet fully exited before Pexpect's
+isalive() executes. Addings a slight delay before the isalive() will
+help. In the following example <span class="code">isalive()</span>
+sometimes returns 1:</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn('ls')<br>child.expect(pexpect.EOF)<br>print child.isalive()</pre>
+</blockquote>
+<p>But if there is any delay before the call to <span class="code">isalive()</span>
+then it will always return 0 as expected.</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn('ls')<br>child.expect(pexpect.EOF)<br>time.sleep(0.1)<br>print child.isalive()</pre>
+</blockquote>
+
+<h2>Truncated output just before child exits</h2>
+<p><i>So far I have seen this only on older versions of <b>Apple's MacOS X</b>.</i>
+If the child application quits it may not flush its output buffer. This
+means that your Pexpect application will receive an EOF even though it
+should have received a little more data before the child died. This is
+not generally a problem when talking to interactive child applications.
+One example where it is a problem is when trying to read output from a
+program like '<span class="code">ls</span>'. You may receive most of
+the directory listing, but the last few lines will get lost before you
+receive an EOF. The reason for this is that '<span class="code">ls</span>'
+runs; completes its task; and then exits. The buffer is not flushed
+before exit so the last few lines are lost. The following example
+demonstrates the problem:</p>
+<p> </p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('ls -l')<br>child.expect (pexpect.EOF)<br>print child.before <br> </pre>
+</blockquote>
+<p></p>
+
+<h2>Controlling SSH on Solaris</h2>
+<p>Pexpect does not yet work perfectly on Solaris.
+One common problem is that SSH sometimes will not allow TTY password
+authentication. For example, you may expect SSH to ask you for a
+password using code like this:
+</p>
+<pre class="code">child = pexpect.spawn ('ssh user at example.com')<br>child.expect ('assword')<br>child.sendline ('mypassword')<br></pre>
+You may see the following error come back from a spawned
+child SSH:
+<p></p>
+<blockquote>Permission denied (publickey,keyboard-interactive). </blockquote>
+<p>
+This means that SSH thinks it can't access the TTY to ask you for your
+password.
+The only solution I have found is to use public key authentication with
+SSH.
+This bypasses the need for a password. I'm not happy with this
+solution.
+The problem is due to poor support for Solaris Pseudo TTYs in the
+Python
+Standard Library. </p>
+<hr noshade="noshade" size="1">
+<h1><a name="changes"></a>CHANGES</h1>
+<h2>Current Release</h2>
+<p>Fixed OSError exception when a pexpect object is cleaned up.
+Previously you might have seen this exception:</p>
+<blockquote>
+ <pre class="code">Exception exceptions.OSError: (10, 'No child processes') <br>in <bound method spawn.__del__ of<br><pexpect.spawn instance at 0xd248c>> ignored</pre>
+</blockquote>
+<p>You should not see that anymore. Thanks to Michael Surette.</p>
+<p>Added support for buffering reads. This greatly improves speed when
+trying to match long output from a child process. When you create an
+instance of the spawn object you can then set a buffer size. For now
+you MUST do the following to turn on buffering -- it may be on by
+default in future version.</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('my_command')<br>child.maxread=1000 # Sets buffer to 1000 characters.</pre>
+</blockquote>
+<div>
+<p>I made a subtle change to the way TIMEOUT and EOF exceptions behave.
+Previously you could either expect these states in which case pexpect
+will not raise an exception, or you could just let pexpect raise an
+exception when these states were encountered. If you expected the
+states then the 'before' property was set to everything before the
+state was encountered, but if you let pexpect raise the exception then
+'before' was not set. Now the 'before' property will get set either way
+you choose to handle these states.</p>
+<h2><i>Older changes...</i></h2>
+<p>The spawn object now provides iterators for a <i>file-like interface</i>.
+This makes Pexpect a more complete file-like object. You can now write
+code like this:</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('ls -l')<br>for line in child:<br> print line<br></pre>
+</blockquote>
+<p>I added the attribute <span class="code">exitstatus</span>. This
+will give the exit code returned by the child process. This will be set
+to <span class="code">None</span> while the child is still alive. When
+<span class="code">isalive()</span> returns 0 then <span class="code">exitstatus</span>
+will be set.</p>
+<p>I made a few more tweaks to <span class="code">isalive()</span> so
+that it will operate more consistently on different platforms. Solaris
+is the most difficult to support.</p>
+<p> </p>
+<p>You can now put <span class="code">TIMEOUT</span> in a list of
+expected patterns. This is just like putting <span class="code">EOF</span>
+in the pattern list. Expecting for a <span class="code">TIMEOUT</span>
+may not be used as often as <span class="code">EOF</span>, but this
+makes Pexpect more consitent.</p>
+<p>Thanks to a suggestion and sample code from Chad J. Schroeder I
+added the ability for Pexpect to operate on a file descriptor that is
+already open. This means that Pexpect can be used to control streams
+such as those from serial port devices. Now you just pass the integer
+file descriptor as the "command" when contsructing a spawn open. For
+example on a Linux box with a modem on ttyS1:</p>
+<blockquote>
+ <pre class="code">fd = os.open("/dev/ttyS1", os.O_RDWR|os.O_NONBLOCK|os.O_NOCTTY)<br>m = pexpect.spawn(fd) # Note integer fd is used instead of usual string.<br>m.send("+++") # Escape sequence<br>m.send("ATZ0\r") # Reset modem to profile 0<br>rval = m.expect(["OK", "ERROR"])</pre>
+</blockquote>
+<h3>Pexpect now tests itself on Compile Farm!</h3>
+<p>I wrote a nice script that uses ssh to connect to each machine on
+Source Forge's Compile Farm and then run the testall.py script for each
+platform. The result of the test is then recorded for each platform.
+Now it's easy to run regression tests across multiple platforms.</p>
+<h3>Pexpect is a file-like object</h3>
+<p>The spawn object now provides a <i>file-like interface</i>. It
+supports most of the methods and attributes defined for Python File
+Objects. </p>
+<p>I changed write and writelines() so that they no longer return a
+value. Use send() if you need that functionality. I did this to make
+the Spawn object more closely match a file-like object.</p>
+<p>read() was renamed to read_nonblocking(). I added a new read()
+method that matches file-like object interface. In general, you should
+not notice the difference except that read() no longer allows you to
+directly set the timeout value. I hope this will not effect any
+existing code. Switching to read_nonblocking() should fix existing code.</p>
+<p>I changed the name of <span class="code">set_echo()</span> to <span
+ class="code">setecho()</span>.</p>
+<p>I changed the name of <span class="code">send_eof()</span> to <span
+ class="code">sendeof()</span>.</p>
+<p>I modified <span class="code">kill()</span> so that it checks to
+make sure the pid isalive().</p>
+<p>I modified <span class="code">spawn()</span> (really called from <span
+ class="code">__spawn()</span>)so that it does not raise an expection
+if <span class="code">setwinsize()</span> fails. Some platforms such
+as Cygwin do not like setwinsize. This was a constant problem and since
+it is not a critical feature I decided to just silence the error.
+Normally I don't like to do that, but in this case I'm making an
+exception.</p>
+<p>Added a method <span class="code">close()</span> that does what you
+think. It closes the file descriptor of the child application. It makes
+no attempt to actually kill the child or wait for its status. </p>
+<p>Add variables <span class="code">__version__</span> and <span
+ class="code">__revision__</span> (from cvs) to the pexpect modules.
+This is mainly helpful to me so that I can make sure that I'm testing
+with the right version instead of one already installed.</p>
+<h3>Logging changes</h3>
+<blockquote>
+ <p><span class="code">log_open()</span> and <span class="code">log_close()</span>
+have been removed. Now use <span class="code">setlog()</span>. The <span
+ class="code">setlog()</span> method takes a file object. This is far
+more flexible than the previous log method. Each time data is written
+to the file object it will be flushed. To turn logging off simply call <span
+ class="code">setlog()</span> with None.</p>
+</blockquote>
+<h2>isalive changes</h2>
+<blockquote>
+ <p>I renamed the <span class="code">isAlive()</span> method to <span
+ class="code">isalive()</span> to match the more typical naming style
+in Python. Also the technique used to detect child process status has
+been drastically modified. Previously I did some funky stuff with
+signals which caused indigestion in other Python modules on some
+platforms. It's was a big headache. It still is, but I think it works
+better now.</p>
+</blockquote>
+<h3>attribute name changes</h3>
+<blockquote>
+ <p>The names of some attributes have been changed. This effects the
+names of the attributes that are set after called the <span
+ class="code">expect()</span> method.</p>
+ <table class="pymenu" border="0" cellpadding="5">
+ <tbody>
+ <tr>
+ <th class="pymenu">NEW NAME</th>
+ <th class="pymenu">OLD NAME</th>
+ </tr>
+ <tr>
+ <td><span class="code">before</span><br>
+ <i>Everything before the match.</i></td>
+ <td><span class="code">before</span></td>
+ </tr>
+ <tr>
+ <td><span class="code">after</span><br>
+ <i>Everything after and including the first character of the
+match</i></td>
+ <td><span class="code">matched</span></td>
+ </tr>
+ <tr>
+ <td><span class="code">match</span><br>
+ <i>This is the re MatchObject from the match.<br>
+You can get groups() from this.<br>
+See '<span class="code">uptime.py</span>' in the examples tar ball.</i></td>
+ <td><i>New -- Did not exist</i></td>
+ </tr>
+ </tbody>
+ </table>
+</blockquote>
+<h3>EOF changes</h3>
+<blockquote>
+ <p>The <span class="code">expect_eof()</span> method is gone. You
+can now simply use the <span class="code">expect()</span> method to
+look for EOF.</p>
+ <p>Was:</p>
+ <blockquote>
+ <p><span class="code">p.expect_eof ()</span></p>
+ </blockquote>
+ <p>Now:</p>
+ <blockquote>
+ <p><span class="code">p.expect (pexpect.EOF)</span></p>
+ </blockquote>
+</blockquote>
+<hr noshade="noshade" size="1">
+<h1><a name="testing"></a>TESTING</h1>
+<p>The following platforms have been tested:</p>
+<!--
+<table class="pymenu" border="0" cellpadding="5">
+ <tbody>
+ <tr>
+ <th class="pymenu">PLATFORM</th>
+ <th class="pymenu">RESULTS</th>
+ </tr>
+ <tr>
+ <td>Linux 2.4.9-ac10-rmk2-np1-cerf2<br>
+armv4l</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Linux 2.4.18 #2<br>
+sparc64</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>MacOS X Darwin Kernel Version 5.5<br>
+powerpc</td>
+ <td>
+ <p>failed more than one test.</p>
+ <p>Generally Pexpect works on OS X, but the nature of the quirks
+cause a many of the tests to fail. See <a href="#bugs">bugs</a>
+(Incomplete Child Output). The problem is more than minor, but Pexpect
+is still more than useful for most tasks. The problem is an edge case.</p>
+ </td>
+ </tr>
+ <tr>
+ <td>Linux 2.2.20<br>
+alpha<br>
+ </td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Linux 2.4.18-5smp<br>
+i686</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>OpenBSD 2.9 GENERIC#653<br>
+i386</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Solaris</td>
+ <td>
+ <p>failed <span class="code">test_destructor</span></p>
+ <p>Otherwise, this is working pretty well. The destructor problem
+is minor. For some reason, the <i>second</i> time a pty file
+descriptor is created and deleted it never gets returned for use. It
+does not effect the first time or the third time or any time after
+that. It's only the second time. This is weird... This could be a file
+descriptor leak, or it could be some peculiarity of how Solaris
+recycles them. I thought it was a UNIX requirement for the OS to give
+you the lowest available filedescriptor number. In any case, this
+should not be a problem unless you create hundreds of pexpect
+instances... It may also be a pty module bug. </p>
+ </td>
+ </tr>
+ <tr>
+ <td>Windows XP Cygwin</td>
+ <td>failed <span class="code">test_destructor</span>. That it
+works at all is amazing to me. Cygwin rules!</td>
+ </tr>
+ </tbody>
+</table>
+-->
+<h1> </h1>
+<h1><a name="todo">TO DO</a></h1>
+<p>Add an option to add a delay after each expect() or before each
+read()/readline() call to automatically avoid the <a href="#echo_bug">echo
+bug</a>.</p>
+<p> </p>
+</div>
+<hr noshade="noshade" size="1">
+<table border="0">
+ <tbody>
+ <tr>
+ <td> <a href="http://www.noah.org/email/"><img src="email.png"
+ alt="Click to send email." border="0" height="16" width="100"></a> </td>
+ </tr>
+ </tbody>
+</table>
+</div>
+<div id="Menu"><b>INDEX</b><br>
+<hr noshade="noshade" size="1"> <a href="#license"
+ title="Python Software Foundation License">License</a><br>
+<a href="#download" title="Download and setup instructions">Download</a><br>
+<a href="#doc" title="Documentation and overview">Documentation</a><br>
+<a href="#status" title="Project Status">Project Status</a><br>
+<a href="#requirements" title="System requirements to use Pexpect">Requirements</a><br>
+<a href="#overview" title="Overview of what Pexpect does">Overview</a><br>
+<a href="#faq" title="FAQ">FAQ</a><br>
+<a href="#bugs" title="Bugs and work-arounds">Known Bugs</a><br>
+<a href="#changes" title="What's new with Pexpect">Recent Changes</a><br>
+<a href="#testing" title="Test results on various platforms">Testing</a><br>
+<a href="#todo" title="What to do next">To do</a><br>
+<a href="http://pexpect.svn.sourceforge.net/viewvc/pexpect/trunk/pexpect/" title="browse SVN">Browse SVN</a><br>
+<br>
+<a href="http://sourceforge.net/projects/pexpect/"
+ title="The Pexpect project page on SourceForge.net"> <img
+ src="http://sourceforge.net/sflogo.php?group_id=59762&type=5"
+ alt="The Pexpect project page on SourceForge.net" border="0"
+ height="31" width="105"> </a> </div>
+</body>
+</html>
Added: lldb/trunk/test/pexpect-2.4/doc/index.template.html
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/doc/index.template.html?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/doc/index.template.html (added)
+++ lldb/trunk/test/pexpect-2.4/doc/index.template.html Fri Mar 11 14:13:06 2011
@@ -0,0 +1,868 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>Pexpect - a Pure Python Expect-like module</title>
+<link rel="stylesheet" href="clean.css" type="text/css">
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<meta name="Author" content="Noah Spurrier">
+<meta name="Keywords"
+ content="pexpect, Noah Spurrier, pypect, Python, Libes, TCL, Expect, pipe, popen, pyExpect, expectpy, expect-like, expect-alike, expect like">
+<meta name="Description"
+ content="Pexpect is a pure Python Expect-like module. Pexpect makes Python a better tool for controlling other applications.">
+</head>
+<body bgcolor="#ffffff" text="#000000">
+<div id="Header">
+<h1>Pexpect version VERSION<br>
+a Pure Python Expect-like module
+</h1>
+</div>
+<div id="Content">
+<p>Pexpect makes Python a better tool for controlling other
+applications.</p>
+<p>Pexpect is a pure Python module for spawning child applications;
+controlling them; and responding to expected patterns in their output.
+Pexpect works like Don Libes' Expect. Pexpect allows your script to
+spawn a child application and control it as if a human were typing
+commands.</p>
+<p>Pexpect can be used for automating interactive applications such as
+ssh, ftp, passwd, telnet, etc. It can be used to a automate setup
+scripts for duplicating software package installations on different
+servers. It can be used for automated software testing. Pexpect is in
+the spirit of Don Libes' Expect, but Pexpect is pure Python. Unlike
+other Expect-like modules for Python, Pexpect does not require TCL or
+Expect nor does it require C extensions to be compiled. It should work
+on any platform that supports the standard Python pty module. The
+Pexpect interface was designed to be easy to use.</p>
+<table border="0">
+ <tbody>
+ <tr>
+ <td align="right" valign="top">Send questions to:</td>
+ <td align="left"><a href="http://www.noah.org/email/"><img
+ src="email.png" alt="Click to send email." border="0" height="16"
+ width="100"></a></td>
+ </tr>
+ </tbody>
+</table>
+<hr noshade="noshade" size="1">
+<h1><a name="license"></a>License: MIT style</h1>
+<p>
+Free, open source, and all that good stuff.<br>
+<br>
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:<br>
+<br>
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.<br>
+<br>
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.<br>
+<br>
+Pexpect Copyright (c) 2008 Noah Spurrier<br>
+http://pexpect.sourceforge.net/
+</p>
+
+<hr noshade="noshade" size="1">
+<h1><a name="download"></a><a
+ href="http://sourceforge.net/project/showfiles.php?group_id=59762">Download</a></h1>
+<p>Download the <a
+ href="http://sourceforge.net/project/showfiles.php?group_id=59762">
+current version here</a> from the SourceForge site. Grab the current Pexpect tarball.
+</p>
+<h2>Installing Pexpect</h2>
+<p>The Pexpect tarball is a standard Python Distutil distribution.</p>
+<ol>
+ <li>download <span class="code">pexpect-VERSION.tar.gz</span></li>
+ <li><span class="code">tar zxf pexpect-VERSION.tar.gz</span></li>
+ <li><span class="code">cd pexpect-VERSION</span></li>
+ <li><span class="code">python setup.py install</span> <i>do this as root</i></li>
+</ol>
+<h2>Examples</h2>
+<p>
+Under the <span class="code">pexpect-VERSION</span> directory you should find
+the <span class="code">examples</span> directory.
+This is the best way to learn to use Pexpect.
+See the descriptions of <a href="examples.html">Pexpect Examples</a>.
+</p>
+<h2><a name="doc"></a>API Documentation</h2>
+<p>
+<blockquote>
+<a href="pexpect.html">pexpect</a> This is the main module that you want.<br>
+<a href="pxssh.html">pxssh</a> Pexpect SSH is an extension of 'pexpect.spawn' that specializes in SSH.<br>
+</blockquote>
+the following are experimental extensions to Pexpect<br>
+<blockquote>
+<a href="fdpexpect.html">fdpexpect</a> fdpexpect extension of 'pexpect.spawn' that uses an open file descriptor.<br>
+<a href="screen.html">SCREEN</a> This represents a virtual 'screen'.<br>
+<a href="ANSI.html">ANSI</a> This parses ANSI/VT-100 terminal escape codes.<br>
+<a href="FSM.html">FSM</a> This is a finite state machine used by ANSI.<br>
+</blockquote>
+</p>
+<hr noshade="noshade" size="1">
+<h1><a name="status"></a>Project Status</h1>
+<p>Automated pyunit tests reach over 80%
+code coverage on pexpect.py. I regularly test on Linux and BSD
+platforms. I try to test on Solaris and Irix.
+</p>
+<hr noshade="noshade" size="1">
+<h1><a name="requirements"></a>Requirements for use of Pexpect</h1>
+<h2>Python</h2>
+<blockquote>
+ <p>Pexpect was written and tested with Python 2.4. It should work on
+earlier versions that have the <span class="code">pty</span> module. I
+sometimes even manually test it with Python 1.5.2, but I can't easily
+run the PyUnit test framework against Python 1.5.2, so I have less
+confidence in Pexpect on Python 1.5.2.</p>
+</blockquote>
+<h2>pty module</h2>
+<blockquote>
+ <p>Any POSIX system (UNIX) with a working <span class="code">pty</span>
+module should be able to run Pexpect. The <span class="code">pty</span>
+module is part of the Standard Python Library, so if you are running on
+a POSIX system you should have it. The <span class="code">pty</span>
+module does not run the same on all platforms. It should be solid on Linux
+and BSD systems. I have taken effort to try to smooth the wrinkles out of the different platforms. To learn more
+about the wrinkles see <a href="#bugs">Bugs</a> and <a href="#testing">Testing</a>.</p>
+</blockquote>
+<p>Pexpect does not currently work on the standard Windows Python (see
+the pty requirement); however, it seems to work fine using <a
+ href="http://www.cygwin.com/">Cygwin</a>. It is possible to build
+something like a pty for Windows, but it would have to use a different
+technique that I am still investigating. I know it's possible because
+Libes' Expect was ported to Windows. <i>If you have any ideas or
+skills to contribute in this area then I would really appreciate some
+tips on how to approach this problem.</i> </p>
+<hr noshade="noshade" size="1">
+<h1><a name="overview"></a>Overview</h1>
+<p>Pexpect can be used for automating interactive applications such as
+ssh, ftp, mencoder, passwd, etc. The Pexpect interface was designed to be
+easy to use. Here is an example of Pexpect in action:</p>
+<blockquote>
+ <pre class="code"># This connects to the openbsd ftp site and<br># downloads the recursive directory listing.<br>import pexpect<br>child = pexpect.spawn ('ftp ftp.openbsd.org')<br>child.expect ('Name .*: ')<br>child.sendline ('anonymous')<br>child.expect ('Password:')<br>child.sendline ('noah at example.com')<br>child.expect ('ftp> ')<br>child.sendline ('cd pub')<br>child.expect('ftp> ')<br>child.sendline ('get ls-lR.gz')<br>child.expect('ftp> ')<br>child.sendline ('bye')<br></pre>
+</blockquote>
+<p> Obviously you could write an ftp client using Python's own <span
+ class="code">ftplib</span> module, but this is just a demonstration.
+You can use this technique with any application. This is especially
+handy if you are writing automated test tools.</p>
+
+<p>There are two important methods in Pexpect -- <span class="code"><b>expect()</b></span>
+and <span class="code"><b>send()</b></span> (or <span class="code">sendline()</span>
+which is like <span class="code">send()</span> with a linefeed).
+The <span class="code">expect()</span> method waits for the child application
+to return a given string. The string you specify is a regular expression, so
+you can match complicated patterns. The <span class="code"><b>send()</b></span> method
+writes a string to the child application. From the child's point of
+view it looks just like someone typed the text from a terminal. After
+each call to <span class="code"><b>expect()</b></span> the <span
+ class="code"><b>before</b></span> and <span class="code"><b>after</b></span>
+properties will be set to the text printed by child application. The <span
+ class="code"><b>before</b></span> property will contain all text up to
+the expected string pattern. The <span class="code"><b>after</b></span> string
+will contain the text that was matched by the expected pattern.
+The <span class="code">match</span> property is set to the <span class="code">re MatchObject</span>.
+</p>
+
+<p>An example of Pexpect in action may make things more clear. This example uses
+<span class="code">ftp</span> to login to the OpenBSD site; list files
+in a directory; and then pass interactive control of the ftp session to
+the human user.</p>
+<blockquote>
+ <pre class="code">import pexpect<br>child = pexpect.spawn ('ftp ftp.openbsd.org')<br>child.expect ('Name .*: ')<br>child.sendline ('anonymous')<br>child.expect ('Password:')<br>child.sendline ('noah at example.com')<br>child.expect ('ftp> ')<br>child.sendline ('ls /pub/OpenBSD/')<br>child.expect ('ftp> ')<br>print child.before # Print the result of the ls command.<br>child.interact() # Give control of the child to the user.<br></pre>
+</blockquote>
+<h2>Special EOF and TIMEOUT patterns</h2>
+<p>
+There are two special patterns to match the End Of File or a Timeout condition.
+You you can pass these patterns to <span class="code">expect()</span>.
+These patterns are not regular expressions. Use them like predefined constants.
+</p>
+<p>If the child has died and you have read all the child's output then ordinarily
+<span class="code">expect()</span> will raise an <span class="code">EOF</span>
+exception. You can read everything up to the EOF without generating an
+exception by using the EOF pattern <span class="code">expect(pexpect.EOF)</span>.
+In this case everything the child has output will be available in the <span
+ class="code">before</span> property.</p>
+<p>The pattern given to <span class="code">expect()</span> may be a
+regular expression or it may also be a <b>list</b> of regular expressions.
+This allows you to match multiple optional responses. The <span class="code">expect()</span>
+method returns the index of the pattern that was matched. For example,
+say you wanted to login to a server. After entering a password you
+could get various responses from the server -- your password could be
+rejected; or you could be allowed in and asked for your terminal type;
+or you could be let right in and given a command prompt. The following
+code fragment gives an example of this:</p>
+<blockquote>
+ <pre class="code">child.expect('password:')<br>child.sendline (my_secret_password)<br># We expect any of these three patterns...<br>i = child.expect (['Permission denied', 'Terminal type', '[#\$] '])<br>if i==0:<br> print 'Permission denied on host. Can't login'<br> child.kill(0)<br>elif i==2:<br> print 'Login OK... need to send terminal type.'<br> child.sendline('vt100')<br> child.expect ('[#\$] ')<br>elif i==3:<br> print 'Login OK.'<br> print 'Shell command prompt', child.after</pre>
+</blockquote>
+<p>If nothing matches an expected pattern then expect will eventually
+raise a TIMEOUT exception. The default time is 30 seconds, but you can
+change this by passing a timeout argument to expect():</p>
+<blockquote>
+ <pre class="code"># Wait no more than 2 minutes (120 seconds) for password prompt.<br>child.expect('password:', timeout=120)</pre>
+</blockquote>
+<h2>Find the end of line -- CR/LF conventions<br>
+Matching at the end of a line can be tricky<br>
+$ regex pattern is useless.<br>
+</h2>
+<p>Pexpect matches regular expressions a little differently than what
+you might be used to.
+</p>
+<p><i><b>The $ pattern for end of line match is useless</b></i>.
+The $ matches the end of string, but Pexpect reads from the child
+one character at a time, so each character looks like the end of a line.
+Pexpect can't do a look-ahead into the child's output stream.
+In general you would have this situation when using regular expressions
+with any stream.<br>
+<i>Note, pexpect does have an internal buffer, so reads are faster
+than one character at a time, but from the user's perspective the regex
+patterns test happens one character at a time.</i></p>
+<p>The best way to match the end of a line is to look for the
+newline: "\r\n" (CR/LF). Yes, that does appear to be DOS-style.
+It may surprise some UNIX people to learn that terminal TTY device drivers
+(dumb, vt100, ANSI, xterm, etc.) all use the CR/LF combination to signify
+the end of line. Pexpect uses a Pseudo-TTY device to talk to the child application, so
+when the child app prints "\n" you actually see "\r\n".
+</p>
+<p><b>UNIX uses just linefeeds to end lines of text, but not when it
+comes to TTY devices!</b> TTY devices are more like the Windows world.
+Each line of text end with a CR/LF combination. When you intercept data
+from a UNIX command from a TTY device you will find that the TTY device
+outputs a CR/LF combination. A UNIX command may only write a linefeed
+(\n), but the TTY device driver converts it to CR/LF. This means that
+your terminal will see lines end with CR/LF (hex <span class="code">0D 0A</span>).
+Since Pexpect emulates a terminal, to match ends of lines you have to
+expect the CR/LF combination.</p>
+<blockquote>
+ <p class="code">child.expect ('\r\n')</p>
+</blockquote>
+<p>If you just need to skip past a new line then <span class="code">expect
+('\n')</span> by itself will work, but if you are expecting a specific
+pattern before the end of line then you need to explicitly look for the
+\r. For example the following expects a word at the end of a line:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+\r\n')</p>
+</blockquote>
+<p>But the following would both fail:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+\n')</p>
+</blockquote>
+<p>And as explained before, trying to use '$' to match the end of line
+would not work either:</p>
+<blockquote>
+ <p class="code">child.expect ('\w+$')</p>
+</blockquote>
+<p>So if you need to explicitly look for the END OF LINE, you want to
+look for the CR/LF combination -- not just the LF and not the $ pattern.</p>
+<p>This problem is not limited to Pexpect. This problem happens any
+time you try to perform a regular expression match on a stream. Regular
+expressions need to look ahead. With a stream it is hard to look ahead
+because the process generating the stream may not be finished. There is no
+way to know if the process has paused momentarily or is finished and
+waiting for you. <font color="#cc0000">Pexpect must implicitly always
+do a NON greedy match (minimal) at the end of a input {### already said
+this}.</font> </p>
+<p>Pexpect compiles all regular expressions with the DOTALL flag. With
+the DOTALL flag a "." will match a newline. See the Python <a
+ href="http://www.python.org/doc/current/lib/node115.html#l2h-733">documentation</a></p>
+<h2>Beware of + and * at the end of input.</h2>
+<p>Remember that any time you try to match a pattern that needs
+look-ahead that you will always get a minimal match (non greedy). For
+example, the following will always return just one character:</p>
+<blockquote>
+ <p class="code">child.expect ('.+')</p>
+</blockquote>
+<p>This example will match successfully, but will always return no
+characters:</p>
+<blockquote>
+ <p class="code">child.expect ('.*')</p>
+</blockquote>
+<p>Generally any star * expression will match as little as possible</p>
+<p>One thing you can do is to try to force a non-ambiguous character at
+the end of your <span class="code">\d+</span> pattern. Expect that
+character to delimit the string. For example, you might try making the
+end of your pattrn be <span class="code">\D+</span> instead of <span
+ class="code">\D*</span>. That means number digits alone would not
+satisfy the (<span class="code">\d+</span>) pattern. You would need
+some number(s) and at least one <span class="code">\D</span> at the
+end. </p>
+<h2>Matching groups</h2>
+<p>You can group regular expression using parenthesis. After a match,
+the <span class="code">match</span> parameter of the spawn object will
+contain the Python Match object. </p>
+<h2>Examples</h2>
+<p>Using "match" and groups...</p>
+<h2>Debugging</h2>
+<p>If you get the string value of a pexpect.spawn object you will get
+lots of useful debugging information. For debugging it's very useful to
+use the following pattern:</p>
+<p>try:<br>
+ i = child.expect ([pattern1, pattern2, pattern3,
+etc])<br>
+except:<br>
+ print "Exception was thrown"<br>
+ print "debug information:"<br>
+ print str(child)<br>
+</p>
+<p>It is also useful to log the child's input and out to a file or the
+screen. The following will turn on logging and send output to stdout
+(the screen).<br>
+</p>
+<p> child = pexpect.spawn (foo)<br>
+ child.logfile = sys.stdout<br>
+<br>
+</p>
+<hr noshade="noshade" size="1">
+<h1>Exceptions</h1>
+<p><b>EOF</b></p>
+<p>Note that two flavors of EOF Exception may be thrown. They are
+virtually identical except for the message string. For practical
+purposes you should have no need to distinguish between them, but they
+do give a little extra information about what type of platform you are
+running. The two messages are:</p>
+<blockquote>
+ <p class="code">End Of File (EOF) in read(). Exception style platform.</p>
+ <p class="code">End Of File (EOF) in read(). Empty string style
+platform.</p>
+</blockquote>
+<p>Some UNIX platforms will throw an exception when you try to read
+from a file descriptor in the EOF state. Other UNIX platforms instead
+quietly return an empty string to indicate that the EOF state has been
+reached.</p>
+<p><b>Expecting EOF</b></p>
+<p>If you wish to read up to the end of the child's output without
+generating an <span class="code">EOF</span> exception then use the <span
+ class="code">expect(pexpect.EOF)</span> method.</p>
+<p><b>TIMEOUT</b></p>
+<p>The <span class="code">expect()</span> and <span class="code">read()</span>
+methods will also timeout if the child does not generate any output for
+a given amount of time. If this happens they will raise a <span
+ class="code">TIMEOUT</span> exception. You can have these method
+ignore a timeout and block indefinitely by passing None for the timeout
+parameter.</p>
+<blockquote>
+ <p class="code">child.expect(pexpect.EOF, timeout=None)</p>
+</blockquote>
+<hr noshade="noshade" size="1">
+<h1><a name="faq"></a>FAQ</h1>
+<p><b>Q: Why don't shell pipe and redirect (| and >) work when I
+spawn a command?</b></p>
+<p>
+
+A: Remember that Pexpect does NOT interpret shell meta characters such as
+redirect, pipe, or wild cards (>, |, or *). That's done by a shell not the
+command you are spawning. This is a common mistake. If you want to run a
+command and pipe it through another command then you must also start a shell.
+For example:
+
+<pre>
+ child = pexpect.spawn('/bin/bash -c "ls -l | grep LOG > log_list.txt"')
+ child.expect(pexpect.EOF)
+</pre>
+
+The second form of spawn (where you pass a list of arguments) is useful in
+situations where you wish to spawn a command and pass it its own argument list.
+This can make syntax more clear. For example, the following is equivalent to
+the previous example:
+
+<pre>
+ shell_cmd = 'ls -l | grep LOG > log_list.txt'
+ child = pexpect.spawn ('/bin/bash', ['-c', shell_cmd])
+ child.expect (pexpect.EOF)
+</pre>
+
+</p>
+<p><b>Q: Isn't there already a Python Expect?</b></p>
+<p>A: Yes, there are several of them. They usually require you to
+compile C. I wanted something that was pure Python and preferably a
+single module that was simple to install. I also wanted something that
+was easy to use. This pure Python expect only recently became possible
+with the introduction of the pty module in the standard Python library.
+Previously C extensions were required.</p>
+
+<p><strong>Q: The before and after properties sound weird.</strong></p>
+<p>Originally I was going to model Pexpect more after Expect, but then
+I found that I could never remember how to get the context of the stuff
+I was trying to parse. I hate having to read my own documentation. I
+decided that it was easier for me to remember what before and after
+was. It just so happens that this is how the -B and -A options in grep
+works, so that made it even easier for me to remember. Whatever makes
+my life easier is what's best.</p>
+
+<p><b>Q: Why not just use Expect?</b></p>
+<p>A: I love it. It's great. I has bailed me out of some real jams, but
+I wanted something that would do 90% of what I need from Expect; be 10%
+of the size; and allow me to write my code in Python instead of TCL.
+Pexpect is not nearly as big as Expect, but Pexpect does everything I
+have ever used Expect for.
+<!-- :-P If I liked TCL then you wouldn't be reading this. My appologies to Don Libes -- Expect is cool, TK is cool, but TCL is only slightly better than Perl in my book. Hopefully after Expyct is done I will not need to use Expect anymore -- except for that lovely autoexpect tool. Damn, I wish I had that! --> </p>
+
+<p><b>Q: Why not just use a pipe (popen())?</b></p>
+<p>A: A pipe works fine for getting the output to non-interactive
+programs. If you just want to get the output from <span class="code">ls</span>,
+<span class="code">uname</span>, or <span class="code">ping</span>
+then this works. Pipes do not work very well for interactive programs
+and pipes will almost certainly fail for most applications that ask for
+passwords such as telnet, ftp, or ssh.</p>
+<p>There are two reasons for this. </p>
+<p>First an application may bypass stdout and print directly to its
+controlling TTY. Something like SSH will do this when it asks you for a
+password. This is why you cannot redirect the password prompt because
+it does not go through stdout or stderr.</p>
+<p>The second reason is because most applications are built using the C
+Standard IO Library (anything that uses <span class="code">#include
+<stdio.h></span>). One of the features of the stdio library is
+that it buffers all input and output. Normally output is <b><i>line
+buffered</i></b> when a program is printing to a TTY (your terminal
+screen). Every time the program prints a line-feed the currently
+buffered data will get printed to your screen. The problem comes when
+you connect a pipe. The stdio library is smart and can tell that it is
+printing to a pipe instead of a TTY. In that case it switches from line
+buffer mode to <i><b>block buffered</b></i>. In this mode the
+currently buffered data is flushed when the buffer is full. This causes
+most interactive programs to deadlock. Block buffering is more
+efficient when writing to disks and pipes. Take the situation where a
+program prints a message "Enter your user name:\n" and then waits for
+you type type something. In block buffered mode, the stdio library will
+not put the message into the pipe even though a linefeed is printed.
+The result is that you never receive the message, yet the child
+application will sit and wait for you to type a response. Don't confuse
+the stdio lib's buffer with the pipe's buffer. The pipe buffer is
+another area that can cause problems. You could flush the input side of
+a pipe, whereas you have no control over the stdio library buffer. </p>
+<p>More information: the Standard IO library has three states for a
+FILE *. These are: _IOFBF for block buffered; _IOLBF for line buffered;
+and _IONBF for unbuffered. The STDIO lib will use block buffering when
+talking to a block file descriptor such as a pipe. This is usually not
+helpful for interactive programs. Short of recompiling your program to
+include fflush() everywhere or recompiling a custom stdio library there
+is not much a controlling application can do about this if talking over
+a pipe.</p>
+<p> The program may have put data in its output that remains unflushed
+because the output buffer is not full; then the program will go and
+deadlock while waiting for input -- because you never send it any
+because you are still waiting for its output (still stuck in the
+STDIO's output buffer).</p>
+<p>The answer is to use a pseudo-tty. A TTY device will force <i><b>line</b></i>
+buffering (as opposed to block buffering). Line buffering means that
+you will get each line when the child program sends a line feed. This
+corresponds to the way most interactive programs operate -- send a line
+of output then wait for a line of input.</p>
+<p>I put "answer" in quotes because it's ugly solution and because
+there is no POSIX standard for pseudo-TTY devices (even though they
+have a TTY standard...). What would make more sense to me would be to
+have some way to set a mode on a file descriptor so that it will tell
+the STDIO to be line-buffered. I have investigated, and I don't think
+there is a way to set the buffered state of a child process. The STDIO
+Library does not maintain any external state in the kernel or whatnot,
+so I don't think there is any way for you to alter it. I'm not quite
+sure how this line-buffered/block-buffered state change happens
+internally in the STDIO library. I think the STDIO lib looks at the
+file descriptor and decides to change behavior based on whether it's a
+TTY or a block file (see isatty()).</p>
+<p>I hope that this qualifies as helpful.</p>
+
+<h1>Don't use a pipe to control another application...</h1>
+<p>Pexpect may seem similar to <span class="code">os.popen()</span> or
+<span class="code">commands</span> module. The main difference is that
+Pexpect (like Expect) uses a pseudo-TTY to talk to the child
+application. Most applications do no work well through the system()
+call or through pipes. And probably all applications that ask a user to
+type in a password will fail. These applications bypass the stdin and
+read directly from the TTY device. Many applications do not explicitly
+flush their output buffers. This causes deadlocks if you try to control
+an interactive application using a pipe. What happens is that most UNIX
+applications use the stdio (#include <stdio.h>) for input and
+output. The stdio library behaves differently depending on where the
+output is going. There is no way to control this behavior from the
+client end.<br>
+</p>
+
+<p><b>Q: Can I do screen scraping with this thing?</b></p>
+<p>A: That depends. If your application just does line-oriented output
+then this is easy. If it does screen-oriented output then it may work,
+but it could be hard. For example, trying to scrape data from the 'top'
+command would be hard. The top command repaints the text window. </p>
+<p>I am working on an ANSI / VT100 terminal emulator that will have
+methods to get characters from an arbitrary X,Y coordinate of the
+virtual screen. It works and you can play with it, but I have no
+working examples at this time.</p>
+<hr noshade="noshade" size="1">
+<h1><a name="bugs"></a>Bugs</h1>
+<h2>Threads</h2>
+<p>On Linux (RH 8) you cannot spawn a child from a different thread and
+pass the handle back to a worker thread. The child is successfully
+spawned but you can't interact with it. The only way to make it work is
+to spawn and interact with the child all in the same thread. [Adam
+Kerrison] </p>
+<h2><a name="echo_bug"></a>Timing issue with send() and sendline()</h2>
+<p>This problem has been addressed and should not effect most users.</p>
+<p>It is sometimes possible to read an echo of the string sent with <span
+ class="code">send()</span> and <span class="code">sendline()</span>.
+If you call <span class="code">sendline()</span> and then immediately
+call <span class="code">readline()</span> you may get part of your
+output echoed back. You may read back what you just wrote even if the
+child application does not explicitly echo it. Timing is critical. This
+could be a security issue when talking to an application that asks for
+a password; otherwise, this does not seem like a big deal. <i>But why
+do TTYs do this</i>?</p>
+<p>People usually report this when they are trying to control SSH or
+some other login. For example, if your code looks something like this: </p>
+<pre class="code">child.expect ('[pP]assword:')<br>child.sendline (my_password)</pre>
+<p><br>
+<blockquote>
+1. SSH prints "password:" prompt to the user.<br>
+2. SSH turns off echo on the TTY device.<br>
+3. SSH waits for user to enter a password.<br>
+</blockquote>
+When scripting with Pexpect what can happen is that Pexpect will response to the "password:" prompt
+before SSH has had time to turn off TTY echo. In other words, Pexpect sends the password between
+steps 1. and 2., so the password gets echoed back to the TTY. I would call this an SSH bug.
+</p>
+<p>
+Pexpect now automatically adds a short delay before sending data to a child process.
+This more closely mimics what happens in the usual human-to-app interaction.
+The delay can be tuned with the 'delaybeforesend' attribute of the spawn class.
+In general, this fixes the problem for everyone and so this should not be an issue
+for most users. For some applications you might with to turn it off.
+ child = pexpect.spawn ("ssh user at example.com")
+ child.delaybeforesend = 0
+</p>
+<p><br>
+</p>
+<p>Try changing it to look like the following. I know that this fix
+does not look correct, but it works. I have not figured out exactly
+what is happening. You would think that the sleep should be after the
+sendline(). The fact that the sleep helps when it's between the
+expect() and the sendline() must be a clue.</p>
+<pre class="code">child.expect ('[pP]assword:')<br>child.sendline (my_password)</pre>
+<h2>Timing issue with isalive()</h2>
+<p>Reading the state of isalive() immediately after a child exits may
+sometimes return 1. This is a race condition. The child has closed its
+file descriptor, but has not yet fully exited before Pexpect's
+isalive() executes. Addings a slight delay before the isalive() will
+help. In the following example <span class="code">isalive()</span>
+sometimes returns 1:</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn('ls')<br>child.expect(pexpect.EOF)<br>print child.isalive()</pre>
+</blockquote>
+<p>But if there is any delay before the call to <span class="code">isalive()</span>
+then it will always return 0 as expected.</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn('ls')<br>child.expect(pexpect.EOF)<br>time.sleep(0.1)<br>print child.isalive()</pre>
+</blockquote>
+
+<h2>Truncated output just before child exits</h2>
+<p><i>So far I have seen this only on older versions of <b>Apple's MacOS X</b>.</i>
+If the child application quits it may not flush its output buffer. This
+means that your Pexpect application will receive an EOF even though it
+should have received a little more data before the child died. This is
+not generally a problem when talking to interactive child applications.
+One example where it is a problem is when trying to read output from a
+program like '<span class="code">ls</span>'. You may receive most of
+the directory listing, but the last few lines will get lost before you
+receive an EOF. The reason for this is that '<span class="code">ls</span>'
+runs; completes its task; and then exits. The buffer is not flushed
+before exit so the last few lines are lost. The following example
+demonstrates the problem:</p>
+<p> </p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('ls -l')<br>child.expect (pexpect.EOF)<br>print child.before <br> </pre>
+</blockquote>
+<p></p>
+
+<h2>Controlling SSH on Solaris</h2>
+<p>Pexpect does not yet work perfectly on Solaris.
+One common problem is that SSH sometimes will not allow TTY password
+authentication. For example, you may expect SSH to ask you for a
+password using code like this:
+</p>
+<pre class="code">child = pexpect.spawn ('ssh user at example.com')<br>child.expect ('assword')<br>child.sendline ('mypassword')<br></pre>
+You may see the following error come back from a spawned
+child SSH:
+<p></p>
+<blockquote>Permission denied (publickey,keyboard-interactive). </blockquote>
+<p>
+This means that SSH thinks it can't access the TTY to ask you for your
+password.
+The only solution I have found is to use public key authentication with
+SSH.
+This bypasses the need for a password. I'm not happy with this
+solution.
+The problem is due to poor support for Solaris Pseudo TTYs in the
+Python
+Standard Library. </p>
+<hr noshade="noshade" size="1">
+<h1><a name="changes"></a>CHANGES</h1>
+<h2>Current Release</h2>
+<p>Fixed OSError exception when a pexpect object is cleaned up.
+Previously you might have seen this exception:</p>
+<blockquote>
+ <pre class="code">Exception exceptions.OSError: (10, 'No child processes') <br>in <bound method spawn.__del__ of<br><pexpect.spawn instance at 0xd248c>> ignored</pre>
+</blockquote>
+<p>You should not see that anymore. Thanks to Michael Surette.</p>
+<p>Added support for buffering reads. This greatly improves speed when
+trying to match long output from a child process. When you create an
+instance of the spawn object you can then set a buffer size. For now
+you MUST do the following to turn on buffering -- it may be on by
+default in future version.</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('my_command')<br>child.maxread=1000 # Sets buffer to 1000 characters.</pre>
+</blockquote>
+<div>
+<p>I made a subtle change to the way TIMEOUT and EOF exceptions behave.
+Previously you could either expect these states in which case pexpect
+will not raise an exception, or you could just let pexpect raise an
+exception when these states were encountered. If you expected the
+states then the 'before' property was set to everything before the
+state was encountered, but if you let pexpect raise the exception then
+'before' was not set. Now the 'before' property will get set either way
+you choose to handle these states.</p>
+<h2><i>Older changes...</i></h2>
+<p>The spawn object now provides iterators for a <i>file-like interface</i>.
+This makes Pexpect a more complete file-like object. You can now write
+code like this:</p>
+<blockquote>
+ <pre class="code">child = pexpect.spawn ('ls -l')<br>for line in child:<br> print line<br></pre>
+</blockquote>
+<p>I added the attribute <span class="code">exitstatus</span>. This
+will give the exit code returned by the child process. This will be set
+to <span class="code">None</span> while the child is still alive. When
+<span class="code">isalive()</span> returns 0 then <span class="code">exitstatus</span>
+will be set.</p>
+<p>I made a few more tweaks to <span class="code">isalive()</span> so
+that it will operate more consistently on different platforms. Solaris
+is the most difficult to support.</p>
+<p> </p>
+<p>You can now put <span class="code">TIMEOUT</span> in a list of
+expected patterns. This is just like putting <span class="code">EOF</span>
+in the pattern list. Expecting for a <span class="code">TIMEOUT</span>
+may not be used as often as <span class="code">EOF</span>, but this
+makes Pexpect more consitent.</p>
+<p>Thanks to a suggestion and sample code from Chad J. Schroeder I
+added the ability for Pexpect to operate on a file descriptor that is
+already open. This means that Pexpect can be used to control streams
+such as those from serial port devices. Now you just pass the integer
+file descriptor as the "command" when contsructing a spawn open. For
+example on a Linux box with a modem on ttyS1:</p>
+<blockquote>
+ <pre class="code">fd = os.open("/dev/ttyS1", os.O_RDWR|os.O_NONBLOCK|os.O_NOCTTY)<br>m = pexpect.spawn(fd) # Note integer fd is used instead of usual string.<br>m.send("+++") # Escape sequence<br>m.send("ATZ0\r") # Reset modem to profile 0<br>rval = m.expect(["OK", "ERROR"])</pre>
+</blockquote>
+<h3>Pexpect now tests itself on Compile Farm!</h3>
+<p>I wrote a nice script that uses ssh to connect to each machine on
+Source Forge's Compile Farm and then run the testall.py script for each
+platform. The result of the test is then recorded for each platform.
+Now it's easy to run regression tests across multiple platforms.</p>
+<h3>Pexpect is a file-like object</h3>
+<p>The spawn object now provides a <i>file-like interface</i>. It
+supports most of the methods and attributes defined for Python File
+Objects. </p>
+<p>I changed write and writelines() so that they no longer return a
+value. Use send() if you need that functionality. I did this to make
+the Spawn object more closely match a file-like object.</p>
+<p>read() was renamed to read_nonblocking(). I added a new read()
+method that matches file-like object interface. In general, you should
+not notice the difference except that read() no longer allows you to
+directly set the timeout value. I hope this will not effect any
+existing code. Switching to read_nonblocking() should fix existing code.</p>
+<p>I changed the name of <span class="code">set_echo()</span> to <span
+ class="code">setecho()</span>.</p>
+<p>I changed the name of <span class="code">send_eof()</span> to <span
+ class="code">sendeof()</span>.</p>
+<p>I modified <span class="code">kill()</span> so that it checks to
+make sure the pid isalive().</p>
+<p>I modified <span class="code">spawn()</span> (really called from <span
+ class="code">__spawn()</span>)so that it does not raise an expection
+if <span class="code">setwinsize()</span> fails. Some platforms such
+as Cygwin do not like setwinsize. This was a constant problem and since
+it is not a critical feature I decided to just silence the error.
+Normally I don't like to do that, but in this case I'm making an
+exception.</p>
+<p>Added a method <span class="code">close()</span> that does what you
+think. It closes the file descriptor of the child application. It makes
+no attempt to actually kill the child or wait for its status. </p>
+<p>Add variables <span class="code">__version__</span> and <span
+ class="code">__revision__</span> (from cvs) to the pexpect modules.
+This is mainly helpful to me so that I can make sure that I'm testing
+with the right version instead of one already installed.</p>
+<h3>Logging changes</h3>
+<blockquote>
+ <p><span class="code">log_open()</span> and <span class="code">log_close()</span>
+have been removed. Now use <span class="code">setlog()</span>. The <span
+ class="code">setlog()</span> method takes a file object. This is far
+more flexible than the previous log method. Each time data is written
+to the file object it will be flushed. To turn logging off simply call <span
+ class="code">setlog()</span> with None.</p>
+</blockquote>
+<h2>isalive changes</h2>
+<blockquote>
+ <p>I renamed the <span class="code">isAlive()</span> method to <span
+ class="code">isalive()</span> to match the more typical naming style
+in Python. Also the technique used to detect child process status has
+been drastically modified. Previously I did some funky stuff with
+signals which caused indigestion in other Python modules on some
+platforms. It's was a big headache. It still is, but I think it works
+better now.</p>
+</blockquote>
+<h3>attribute name changes</h3>
+<blockquote>
+ <p>The names of some attributes have been changed. This effects the
+names of the attributes that are set after called the <span
+ class="code">expect()</span> method.</p>
+ <table class="pymenu" border="0" cellpadding="5">
+ <tbody>
+ <tr>
+ <th class="pymenu">NEW NAME</th>
+ <th class="pymenu">OLD NAME</th>
+ </tr>
+ <tr>
+ <td><span class="code">before</span><br>
+ <i>Everything before the match.</i></td>
+ <td><span class="code">before</span></td>
+ </tr>
+ <tr>
+ <td><span class="code">after</span><br>
+ <i>Everything after and including the first character of the
+match</i></td>
+ <td><span class="code">matched</span></td>
+ </tr>
+ <tr>
+ <td><span class="code">match</span><br>
+ <i>This is the re MatchObject from the match.<br>
+You can get groups() from this.<br>
+See '<span class="code">uptime.py</span>' in the examples tar ball.</i></td>
+ <td><i>New -- Did not exist</i></td>
+ </tr>
+ </tbody>
+ </table>
+</blockquote>
+<h3>EOF changes</h3>
+<blockquote>
+ <p>The <span class="code">expect_eof()</span> method is gone. You
+can now simply use the <span class="code">expect()</span> method to
+look for EOF.</p>
+ <p>Was:</p>
+ <blockquote>
+ <p><span class="code">p.expect_eof ()</span></p>
+ </blockquote>
+ <p>Now:</p>
+ <blockquote>
+ <p><span class="code">p.expect (pexpect.EOF)</span></p>
+ </blockquote>
+</blockquote>
+<hr noshade="noshade" size="1">
+<h1><a name="testing"></a>TESTING</h1>
+<p>The following platforms have been tested:</p>
+<!--
+<table class="pymenu" border="0" cellpadding="5">
+ <tbody>
+ <tr>
+ <th class="pymenu">PLATFORM</th>
+ <th class="pymenu">RESULTS</th>
+ </tr>
+ <tr>
+ <td>Linux 2.4.9-ac10-rmk2-np1-cerf2<br>
+armv4l</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Linux 2.4.18 #2<br>
+sparc64</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>MacOS X Darwin Kernel Version 5.5<br>
+powerpc</td>
+ <td>
+ <p>failed more than one test.</p>
+ <p>Generally Pexpect works on OS X, but the nature of the quirks
+cause a many of the tests to fail. See <a href="#bugs">bugs</a>
+(Incomplete Child Output). The problem is more than minor, but Pexpect
+is still more than useful for most tasks. The problem is an edge case.</p>
+ </td>
+ </tr>
+ <tr>
+ <td>Linux 2.2.20<br>
+alpha<br>
+ </td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Linux 2.4.18-5smp<br>
+i686</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>OpenBSD 2.9 GENERIC#653<br>
+i386</td>
+ <td><b><i>all tests passed</i></b></td>
+ </tr>
+ <tr>
+ <td>Solaris</td>
+ <td>
+ <p>failed <span class="code">test_destructor</span></p>
+ <p>Otherwise, this is working pretty well. The destructor problem
+is minor. For some reason, the <i>second</i> time a pty file
+descriptor is created and deleted it never gets returned for use. It
+does not effect the first time or the third time or any time after
+that. It's only the second time. This is weird... This could be a file
+descriptor leak, or it could be some peculiarity of how Solaris
+recycles them. I thought it was a UNIX requirement for the OS to give
+you the lowest available filedescriptor number. In any case, this
+should not be a problem unless you create hundreds of pexpect
+instances... It may also be a pty module bug. </p>
+ </td>
+ </tr>
+ <tr>
+ <td>Windows XP Cygwin</td>
+ <td>failed <span class="code">test_destructor</span>. That it
+works at all is amazing to me. Cygwin rules!</td>
+ </tr>
+ </tbody>
+</table>
+-->
+<h1> </h1>
+<h1><a name="todo">TO DO</a></h1>
+<p>Add an option to add a delay after each expect() or before each
+read()/readline() call to automatically avoid the <a href="#echo_bug">echo
+bug</a>.</p>
+<p> </p>
+</div>
+<hr noshade="noshade" size="1">
+<table border="0">
+ <tbody>
+ <tr>
+ <td> <a href="http://www.noah.org/email/"><img src="email.png"
+ alt="Click to send email." border="0" height="16" width="100"></a> </td>
+ </tr>
+ </tbody>
+</table>
+</div>
+<div id="Menu"><b>INDEX</b><br>
+<hr noshade="noshade" size="1"> <a href="#license"
+ title="Python Software Foundation License">License</a><br>
+<a href="#download" title="Download and setup instructions">Download</a><br>
+<a href="#doc" title="Documentation and overview">Documentation</a><br>
+<a href="#status" title="Project Status">Project Status</a><br>
+<a href="#requirements" title="System requirements to use Pexpect">Requirements</a><br>
+<a href="#overview" title="Overview of what Pexpect does">Overview</a><br>
+<a href="#faq" title="FAQ">FAQ</a><br>
+<a href="#bugs" title="Bugs and work-arounds">Known Bugs</a><br>
+<a href="#changes" title="What's new with Pexpect">Recent Changes</a><br>
+<a href="#testing" title="Test results on various platforms">Testing</a><br>
+<a href="#todo" title="What to do next">To do</a><br>
+<a href="http://pexpect.svn.sourceforge.net/viewvc/pexpect/trunk/pexpect/" title="browse SVN">Browse SVN</a><br>
+<br>
+<a href="http://sourceforge.net/projects/pexpect/"
+ title="The Pexpect project page on SourceForge.net"> <img
+ src="http://sourceforge.net/sflogo.php?group_id=59762&type=5"
+ alt="The Pexpect project page on SourceForge.net" border="0"
+ height="31" width="105"> </a> </div>
+</body>
+</html>
Added: lldb/trunk/test/pexpect-2.4/examples/README
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/README?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/README (added)
+++ lldb/trunk/test/pexpect-2.4/examples/README Fri Mar 11 14:13:06 2011
@@ -0,0 +1,72 @@
+This directory contains scripts that give examples of using Pexpect.
+
+hive.py
+ This script creates SSH connections to a list of hosts that
+ you provide. Then you are given a command line prompt. Each
+ shell command that you enter is sent to all the hosts. The
+ response from each host is collected and printed. For example,
+ you could connect to a dozen different machines and reboot
+ them all at once.
+
+script.py
+ This implements a command similar to the classic BSD "script" command.
+ This will start a subshell and log all input and output to a file.
+ This demonstrates the interact() method of Pexpect.
+
+fix_cvs_files.py
+ This is for cleaning up binary files improperly added to
+ CVS. This script scans the given path to find binary files;
+ checks with CVS to see if the sticky options are set to -kb;
+ finally if sticky options are not -kb then uses 'cvs admin'
+ to set the -kb option.
+
+ftp.py
+ This demonstrates an FTP "bookmark".
+ This connects to an ftp site; does a few ftp commands; and then gives the user
+ interactive control over the session. In this case the "bookmark" is to a
+ directory on the OpenBSD ftp server. It puts you in the i386 packages
+ directory. You can easily modify this for other sites.
+ This demonstrates the interact() method of Pexpect.
+
+monitor.py
+ This runs a sequence of system status commands on a remote host using SSH.
+ It runs a simple system checks such as uptime and free to monitor
+ the state of the remote host.
+
+passmass.py
+ This will login to a list of hosts and change the password of the
+ given user. This demonstrates scripting logins; although, you could
+ more easily do this using the pxssh subclass of Pexpect.
+ See also the "hive.py" example script for a more general example
+ of scripting a collection of servers.
+
+python.py
+ This starts the python interpreter and prints the greeting message backwards.
+ It then gives the user interactive control of Python. It's pretty useless!
+
+rippy.py
+ This is a wizard for mencoder. It greatly simplifies the process of
+ ripping a DVD to mpeg4 format (XviD, DivX). It can transcode from any
+ video file to another. It has options for resampling the audio stream;
+ removing interlace artifacts, fitting to a target file size, etc.
+ There are lots of options, but the process is simple and easy to use.
+
+sshls.py
+ This lists a directory on a remote machine.
+
+ssh_tunnel.py
+ This starts an SSH tunnel to a remote machine. It monitors the connection
+ and restarts the tunnel if it goes down.
+
+uptime.py
+ This will run the uptime command and parse the output into python variables.
+ This demonstrates using a single regular expression to match the output
+ of a command and capturing different variable in match groups.
+ The regular expression takes into account a wide variety of different
+ formats for uptime output.
+
+df.py
+ This collects filesystem capacity info using the 'df' command.
+ Tuples of filesystem name and percentage are stored in a list.
+ A simple report is printed. Filesystems over 95% capacity are highlighted.
+
Added: lldb/trunk/test/pexpect-2.4/examples/astat.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/astat.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/astat.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/astat.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,74 @@
+#!/usr/bin/env python
+
+"""This runs Apache Status on the remote host and returns the number of requests per second.
+
+./astat.py [-s server_hostname] [-u username] [-p password]
+ -s : hostname of the remote server to login to.
+ -u : username to user for login.
+ -p : Password to user for login.
+
+Example:
+ This will print information about the given host:
+ ./astat.py -s www.example.com -u mylogin -p mypassword
+
+"""
+
+import os, sys, time, re, getopt, getpass
+import traceback
+import pexpect, pxssh
+
+def exit_with_usage():
+
+ print globals()['__doc__']
+ os._exit(1)
+
+def main():
+
+ ######################################################################
+ ## Parse the options, arguments, get ready, etc.
+ ######################################################################
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?s:u:p:', ['help','h','?'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+ options = dict(optlist)
+ if len(args) > 1:
+ exit_with_usage()
+
+ if [elem for elem in options if elem in ['-h','--h','-?','--?','--help']]:
+ print "Help:"
+ exit_with_usage()
+
+ if '-s' in options:
+ hostname = options['-s']
+ else:
+ hostname = raw_input('hostname: ')
+ if '-u' in options:
+ username = options['-u']
+ else:
+ username = raw_input('username: ')
+ if '-p' in options:
+ password = options['-p']
+ else:
+ password = getpass.getpass('password: ')
+
+ #
+ # Login via SSH
+ #
+ p = pxssh.pxssh()
+ p.login(hostname, username, password)
+ p.sendline('apachectl status')
+ p.expect('([0-9]+\.[0-9]+)\s*requests/sec')
+ requests_per_second = p.match.groups()[0]
+ p.logout()
+ print requests_per_second
+
+if __name__ == "__main__":
+ try:
+ main()
+ except Exception, e:
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/astat.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/bd_client.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/bd_client.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/bd_client.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/bd_client.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+"""This is a very simple client for the backdoor daemon. This is intended more
+for testing rather than normal use. See bd_serv.py """
+
+import socket
+import sys, time, select
+
+def recv_wrapper(s):
+ r,w,e = select.select([s.fileno()],[],[], 2)
+ if not r:
+ return ''
+ #cols = int(s.recv(4))
+ #rows = int(s.recv(4))
+ cols = 80
+ rows = 24
+ packet_size = cols * rows * 2 # double it for good measure
+ return s.recv(packet_size)
+
+#HOST = '' #'localhost' # The remote host
+#PORT = 1664 # The same port as used by the server
+s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+s.connect(sys.argv[1])#(HOST, PORT))
+time.sleep(1)
+#s.setblocking(0)
+#s.send('COMMAND' + '\x01' + sys.argv[1])
+s.send(':sendline ' + sys.argv[2])
+print recv_wrapper(s)
+s.close()
+sys.exit()
+#while True:
+# data = recv_wrapper(s)
+# if data == '':
+# break
+# sys.stdout.write (data)
+# sys.stdout.flush()
+#s.close()
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/bd_client.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/bd_serv.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/bd_serv.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/bd_serv.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/bd_serv.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,316 @@
+#!/usr/bin/env python
+
+"""Back door shell server
+
+This exposes an shell terminal on a socket.
+
+ --hostname : sets the remote host name to open an ssh connection to.
+ --username : sets the user name to login with
+ --password : (optional) sets the password to login with
+ --port : set the local port for the server to listen on
+ --watch : show the virtual screen after each client request
+"""
+
+# Having the password on the command line is not a good idea, but
+# then this entire project is probably not the most security concious thing
+# I've ever built. This should be considered an experimental tool -- at best.
+import pxssh, pexpect, ANSI
+import time, sys, os, getopt, getpass, traceback, threading, socket
+
+def exit_with_usage(exit_code=1):
+
+ print globals()['__doc__']
+ os._exit(exit_code)
+
+class roller (threading.Thread):
+
+ """This runs a function in a loop in a thread."""
+
+ def __init__(self, interval, function, args=[], kwargs={}):
+
+ """The interval parameter defines time between each call to the function.
+ """
+
+ threading.Thread.__init__(self)
+ self.interval = interval
+ self.function = function
+ self.args = args
+ self.kwargs = kwargs
+ self.finished = threading.Event()
+
+ def cancel(self):
+
+ """Stop the roller."""
+
+ self.finished.set()
+
+ def run(self):
+
+ while not self.finished.isSet():
+ # self.finished.wait(self.interval)
+ self.function(*self.args, **self.kwargs)
+
+def endless_poll (child, prompt, screen, refresh_timeout=0.1):
+
+ """This keeps the screen updated with the output of the child. This runs in
+ a separate thread. See roller(). """
+
+ #child.logfile_read = screen
+ try:
+ s = child.read_nonblocking(4000, 0.1)
+ screen.write(s)
+ except:
+ pass
+ #while True:
+ # #child.prompt (timeout=refresh_timeout)
+ # try:
+ # #child.read_nonblocking(1,timeout=refresh_timeout)
+ # child.read_nonblocking(4000, 0.1)
+ # except:
+ # pass
+
+def daemonize (stdin='/dev/null', stdout='/dev/null', stderr='/dev/null'):
+
+ '''This forks the current process into a daemon. Almost none of this is
+ necessary (or advisable) if your daemon is being started by inetd. In that
+ case, stdin, stdout and stderr are all set up for you to refer to the
+ network connection, and the fork()s and session manipulation should not be
+ done (to avoid confusing inetd). Only the chdir() and umask() steps remain
+ as useful.
+
+ References:
+ UNIX Programming FAQ
+ 1.7 How do I get my program to act like a daemon?
+ http://www.erlenstar.demon.co.uk/unix/faq_2.html#SEC16
+
+ Advanced Programming in the Unix Environment
+ W. Richard Stevens, 1992, Addison-Wesley, ISBN 0-201-56317-7.
+
+ The stdin, stdout, and stderr arguments are file names that will be opened
+ and be used to replace the standard file descriptors in sys.stdin,
+ sys.stdout, and sys.stderr. These arguments are optional and default to
+ /dev/null. Note that stderr is opened unbuffered, so if it shares a file
+ with stdout then interleaved output may not appear in the order that you
+ expect. '''
+
+ # Do first fork.
+ try:
+ pid = os.fork()
+ if pid > 0:
+ sys.exit(0) # Exit first parent.
+ except OSError, e:
+ sys.stderr.write ("fork #1 failed: (%d) %s\n" % (e.errno, e.strerror) )
+ sys.exit(1)
+
+ # Decouple from parent environment.
+ os.chdir("/")
+ os.umask(0)
+ os.setsid()
+
+ # Do second fork.
+ try:
+ pid = os.fork()
+ if pid > 0:
+ sys.exit(0) # Exit second parent.
+ except OSError, e:
+ sys.stderr.write ("fork #2 failed: (%d) %s\n" % (e.errno, e.strerror) )
+ sys.exit(1)
+
+ # Now I am a daemon!
+
+ # Redirect standard file descriptors.
+ si = open(stdin, 'r')
+ so = open(stdout, 'a+')
+ se = open(stderr, 'a+', 0)
+ os.dup2(si.fileno(), sys.stdin.fileno())
+ os.dup2(so.fileno(), sys.stdout.fileno())
+ os.dup2(se.fileno(), sys.stderr.fileno())
+
+ # I now return as the daemon
+ return 0
+
+def add_cursor_blink (response, row, col):
+
+ i = (row-1) * 80 + col
+ return response[:i]+'<img src="http://www.noah.org/cursor.gif">'+response[i:]
+
+def main ():
+
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?d', ['help','h','?', 'hostname=', 'username=', 'password=', 'port=', 'watch'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+
+ command_line_options = dict(optlist)
+ options = dict(optlist)
+ # There are a million ways to cry for help. These are but a few of them.
+ if [elem for elem in command_line_options if elem in ['-h','--h','-?','--?','--help']]:
+ exit_with_usage(0)
+
+ hostname = "127.0.0.1"
+ port = 1664
+ username = os.getenv('USER')
+ password = ""
+ daemon_mode = False
+ if '-d' in options:
+ daemon_mode = True
+ if '--watch' in options:
+ watch_mode = True
+ else:
+ watch_mode = False
+ if '--hostname' in options:
+ hostname = options['--hostname']
+ if '--port' in options:
+ port = int(options['--port'])
+ if '--username' in options:
+ username = options['--username']
+ print "Login for %s@%s:%s" % (username, hostname, port)
+ if '--password' in options:
+ password = options['--password']
+ else:
+ password = getpass.getpass('password: ')
+
+ if daemon_mode:
+ print "daemonizing server"
+ daemonize()
+ #daemonize('/dev/null','/tmp/daemon.log','/tmp/daemon.log')
+
+ sys.stdout.write ('server started with pid %d\n' % os.getpid() )
+
+ virtual_screen = ANSI.ANSI (24,80)
+ child = pxssh.pxssh()
+ child.login (hostname, username, password)
+ print 'created shell. command line prompt is', child.PROMPT
+ #child.sendline ('stty -echo')
+ #child.setecho(False)
+ virtual_screen.write (child.before)
+ virtual_screen.write (child.after)
+
+ if os.path.exists("/tmp/mysock"): os.remove("/tmp/mysock")
+ s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+ localhost = '127.0.0.1'
+ s.bind('/tmp/mysock')
+ os.chmod('/tmp/mysock',0777)
+ print 'Listen'
+ s.listen(1)
+ print 'Accept'
+ #s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+ #localhost = '127.0.0.1'
+ #s.bind((localhost, port))
+ #print 'Listen'
+ #s.listen(1)
+
+ r = roller (0.01, endless_poll, (child, child.PROMPT, virtual_screen))
+ r.start()
+ print "screen poll updater started in background thread"
+ sys.stdout.flush()
+
+ try:
+ while True:
+ conn, addr = s.accept()
+ print 'Connected by', addr
+ data = conn.recv(1024)
+ if data[0]!=':':
+ cmd = ':sendline'
+ arg = data.strip()
+ else:
+ request = data.split(' ', 1)
+ if len(request)>1:
+ cmd = request[0].strip()
+ arg = request[1].strip()
+ else:
+ cmd = request[0].strip()
+ if cmd == ':exit':
+ r.cancel()
+ break
+ elif cmd == ':sendline':
+ child.sendline (arg)
+ #child.prompt(timeout=2)
+ time.sleep(0.2)
+ shell_window = str(virtual_screen)
+ elif cmd == ':send' or cmd==':xsend':
+ if cmd==':xsend':
+ arg = arg.decode("hex")
+ child.send (arg)
+ time.sleep(0.2)
+ shell_window = str(virtual_screen)
+ elif cmd == ':cursor':
+ shell_window = '%x%x' % (virtual_screen.cur_r, virtual_screen.cur_c)
+ elif cmd == ':refresh':
+ shell_window = str(virtual_screen)
+
+ response = []
+ response.append (shell_window)
+ #response = add_cursor_blink (response, row, col)
+ sent = conn.send('\n'.join(response))
+ if watch_mode: print '\n'.join(response)
+ if sent < len (response):
+ print "Sent is too short. Some data was cut off."
+ conn.close()
+ finally:
+ r.cancel()
+ print "cleaning up socket"
+ s.close()
+ if os.path.exists("/tmp/mysock"): os.remove("/tmp/mysock")
+ print "done!"
+
+def pretty_box (rows, cols, s):
+
+ """This puts an ASCII text box around the given string, s.
+ """
+
+ top_bot = '+' + '-'*cols + '+\n'
+ return top_bot + '\n'.join(['|'+line+'|' for line in s.split('\n')]) + '\n' + top_bot
+
+def error_response (msg):
+
+ response = []
+ response.append ("""All commands start with :
+:{REQUEST} {ARGUMENT}
+{REQUEST} may be one of the following:
+ :sendline: Run the ARGUMENT followed by a line feed.
+ :send : send the characters in the ARGUMENT without a line feed.
+ :refresh : Use to catch up the screen with the shell if state gets out of sync.
+Example:
+ :sendline ls -l
+You may also leave off :command and it will be assumed.
+Example:
+ ls -l
+is equivalent to:
+ :sendline ls -l
+""")
+ response.append (msg)
+ return '\n'.join(response)
+
+def parse_host_connect_string (hcs):
+
+ """This parses a host connection string in the form
+ username:password at hostname:port. All fields are options expcet hostname. A
+ dictionary is returned with all four keys. Keys that were not included are
+ set to empty strings ''. Note that if your password has the '@' character
+ then you must backslash escape it. """
+
+ if '@' in hcs:
+ p = re.compile (r'(?P<username>[^@:]*)(:?)(?P<password>.*)(?!\\)@(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ else:
+ p = re.compile (r'(?P<username>)(?P<password>)(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ m = p.search (hcs)
+ d = m.groupdict()
+ d['password'] = d['password'].replace('\\@','@')
+ return d
+
+if __name__ == "__main__":
+
+ try:
+ start_time = time.time()
+ print time.asctime()
+ main()
+ print time.asctime()
+ print "TOTAL TIME IN MINUTES:",
+ print (time.time() - start_time) / 60.0
+ except Exception, e:
+ print str(e)
+ tb_dump = traceback.format_exc()
+ print str(tb_dump)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/bd_serv.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi (added)
+++ lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi Fri Mar 11 14:13:06 2011
@@ -0,0 +1,762 @@
+#!/usr/bin/python
+##!/usr/bin/env python
+"""CGI shell server
+
+This exposes a shell terminal on a web page.
+It uses AJAX to send keys and receive screen updates.
+The client web browser needs nothing but CSS and Javascript.
+
+ --hostname : sets the remote host name to open an ssh connection to.
+ --username : sets the user name to login with
+ --password : (optional) sets the password to login with
+ --port : set the local port for the server to listen on
+ --watch : show the virtual screen after each client request
+
+This project is probably not the most security concious thing I've ever built.
+This should be considered an experimental tool -- at best.
+"""
+import sys,os
+sys.path.insert (0,os.getcwd()) # let local modules precede any installed modules
+import socket, random, string, traceback, cgi, time, getopt, getpass, threading, resource, signal
+import pxssh, pexpect, ANSI
+
+def exit_with_usage(exit_code=1):
+ print globals()['__doc__']
+ os._exit(exit_code)
+
+def client (command, host='localhost', port=-1):
+ """This sends a request to the server and returns the response.
+ If port <= 0 then host is assumed to be the filename of a Unix domain socket.
+ If port > 0 then host is an inet hostname.
+ """
+ if port <= 0:
+ s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+ s.connect(host)
+ else:
+ s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+ s.connect((host, port))
+ s.send(command)
+ data = s.recv (2500)
+ s.close()
+ return data
+
+def server (hostname, username, password, socket_filename='/tmp/server_sock', daemon_mode = True, verbose=False):
+ """This starts and services requests from a client.
+ If daemon_mode is True then this forks off a separate daemon process and returns the daemon's pid.
+ If daemon_mode is False then this does not return until the server is done.
+ """
+ if daemon_mode:
+ mypid_name = '/tmp/%d.pid' % os.getpid()
+ daemon_pid = daemonize(daemon_pid_filename=mypid_name)
+ time.sleep(1)
+ if daemon_pid != 0:
+ os.unlink(mypid_name)
+ return daemon_pid
+
+ virtual_screen = ANSI.ANSI (24,80)
+ child = pxssh.pxssh()
+ try:
+ child.login (hostname, username, password, login_naked=True)
+ except:
+ return
+ if verbose: print 'login OK'
+ virtual_screen.write (child.before)
+ virtual_screen.write (child.after)
+
+ if os.path.exists(socket_filename): os.remove(socket_filename)
+ s = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+ s.bind(socket_filename)
+ os.chmod(socket_filename, 0777)
+ if verbose: print 'Listen'
+ s.listen(1)
+
+ r = roller (endless_poll, (child, child.PROMPT, virtual_screen))
+ r.start()
+ if verbose: print "started screen-poll-updater in background thread"
+ sys.stdout.flush()
+ try:
+ while True:
+ conn, addr = s.accept()
+ if verbose: print 'Connected by', addr
+ data = conn.recv(1024)
+ request = data.split(' ', 1)
+ if len(request)>1:
+ cmd = request[0].strip()
+ arg = request[1].strip()
+ else:
+ cmd = request[0].strip()
+ arg = ''
+
+ if cmd == 'exit':
+ r.cancel()
+ break
+ elif cmd == 'sendline':
+ child.sendline (arg)
+ time.sleep(0.1)
+ shell_window = str(virtual_screen)
+ elif cmd == 'send' or cmd=='xsend':
+ if cmd=='xsend':
+ arg = arg.decode("hex")
+ child.send (arg)
+ time.sleep(0.1)
+ shell_window = str(virtual_screen)
+ elif cmd == 'cursor':
+ shell_window = '%x,%x' % (virtual_screen.cur_r, virtual_screen.cur_c)
+ elif cmd == 'refresh':
+ shell_window = str(virtual_screen)
+ elif cmd == 'hash':
+ shell_window = str(hash(str(virtual_screen)))
+
+ response = []
+ response.append (shell_window)
+ if verbose: print '\n'.join(response)
+ sent = conn.send('\n'.join(response))
+ if sent < len (response):
+ if verbose: print "Sent is too short. Some data was cut off."
+ conn.close()
+ except e:
+ pass
+ r.cancel()
+ if verbose: print "cleaning up socket"
+ s.close()
+ if os.path.exists(socket_filename): os.remove(socket_filename)
+ if verbose: print "server done!"
+
+class roller (threading.Thread):
+ """This class continuously loops a function in a thread.
+ This is basically a thin layer around Thread with a
+ while loop and a cancel.
+ """
+ def __init__(self, function, args=[], kwargs={}):
+ threading.Thread.__init__(self)
+ self.function = function
+ self.args = args
+ self.kwargs = kwargs
+ self.finished = threading.Event()
+ def cancel(self):
+ """Stop the roller."""
+ self.finished.set()
+ def run(self):
+ while not self.finished.isSet():
+ self.function(*self.args, **self.kwargs)
+
+def endless_poll (child, prompt, screen, refresh_timeout=0.1):
+ """This keeps the screen updated with the output of the child.
+ This will be run in a separate thread. See roller class.
+ """
+ #child.logfile_read = screen
+ try:
+ s = child.read_nonblocking(4000, 0.1)
+ screen.write(s)
+ except:
+ pass
+
+def daemonize (stdin=None, stdout=None, stderr=None, daemon_pid_filename=None):
+ """This runs the current process in the background as a daemon.
+ The arguments stdin, stdout, stderr allow you to set the filename that the daemon reads and writes to.
+ If they are set to None then all stdio for the daemon will be directed to /dev/null.
+ If daemon_pid_filename is set then the pid of the daemon will be written to it as plain text
+ and the pid will be returned. If daemon_pid_filename is None then this will return None.
+ """
+ UMASK = 0
+ WORKINGDIR = "/"
+ MAXFD = 1024
+
+ # The stdio file descriptors are redirected to /dev/null by default.
+ if hasattr(os, "devnull"):
+ DEVNULL = os.devnull
+ else:
+ DEVNULL = "/dev/null"
+ if stdin is None: stdin = DEVNULL
+ if stdout is None: stdout = DEVNULL
+ if stderr is None: stderr = DEVNULL
+
+ try:
+ pid = os.fork()
+ except OSError, e:
+ raise Exception, "%s [%d]" % (e.strerror, e.errno)
+
+ if pid != 0: # The first child.
+ os.waitpid(pid,0)
+ if daemon_pid_filename is not None:
+ daemon_pid = int(file(daemon_pid_filename,'r').read())
+ return daemon_pid
+ else:
+ return None
+
+ # first child
+ os.setsid()
+ signal.signal(signal.SIGHUP, signal.SIG_IGN)
+
+ try:
+ pid = os.fork() # fork second child
+ except OSError, e:
+ raise Exception, "%s [%d]" % (e.strerror, e.errno)
+
+ if pid != 0:
+ if daemon_pid_filename is not None:
+ file(daemon_pid_filename,'w').write(str(pid))
+ os._exit(0) # exit parent (the first child) of the second child.
+
+ # second child
+ os.chdir(WORKINGDIR)
+ os.umask(UMASK)
+
+ maxfd = resource.getrlimit(resource.RLIMIT_NOFILE)[1]
+ if maxfd == resource.RLIM_INFINITY:
+ maxfd = MAXFD
+
+ # close all file descriptors
+ for fd in xrange(0, maxfd):
+ try:
+ os.close(fd)
+ except OSError: # fd wasn't open to begin with (ignored)
+ pass
+
+ os.open (DEVNULL, os.O_RDWR) # standard input
+
+ # redirect standard file descriptors
+ si = open(stdin, 'r')
+ so = open(stdout, 'a+')
+ se = open(stderr, 'a+', 0)
+ os.dup2(si.fileno(), sys.stdin.fileno())
+ os.dup2(so.fileno(), sys.stdout.fileno())
+ os.dup2(se.fileno(), sys.stderr.fileno())
+
+ return 0
+
+def client_cgi ():
+ """This handles the request if this script was called as a cgi.
+ """
+ sys.stderr = sys.stdout
+ ajax_mode = False
+ TITLE="Shell"
+ SHELL_OUTPUT=""
+ SID="NOT"
+ print "Content-type: text/html;charset=utf-8\r\n"
+ try:
+ form = cgi.FieldStorage()
+ if form.has_key('ajax'):
+ ajax_mode = True
+ ajax_cmd = form['ajax'].value
+ SID=form['sid'].value
+ if ajax_cmd == 'send':
+ command = 'xsend'
+ arg = form['arg'].value.encode('hex')
+ result = client (command + ' ' + arg, '/tmp/'+SID)
+ print result
+ elif ajax_cmd == 'refresh':
+ command = 'refresh'
+ result = client (command, '/tmp/'+SID)
+ print result
+ elif ajax_cmd == 'cursor':
+ command = 'cursor'
+ result = client (command, '/tmp/'+SID)
+ print result
+ elif ajax_cmd == 'exit':
+ command = 'exit'
+ result = client (command, '/tmp/'+SID)
+ print result
+ elif ajax_cmd == 'hash':
+ command = 'hash'
+ result = client (command, '/tmp/'+SID)
+ print result
+ elif not form.has_key('sid'):
+ SID=random_sid()
+ print LOGIN_HTML % locals();
+ else:
+ SID=form['sid'].value
+ if form.has_key('start_server'):
+ USERNAME = form['username'].value
+ PASSWORD = form['password'].value
+ dpid = server ('127.0.0.1', USERNAME, PASSWORD, '/tmp/'+SID)
+ SHELL_OUTPUT="daemon pid: " + str(dpid)
+ else:
+ if form.has_key('cli'):
+ command = 'sendline ' + form['cli'].value
+ else:
+ command = 'sendline'
+ SHELL_OUTPUT = client (command, '/tmp/'+SID)
+ print CGISH_HTML % locals()
+ except:
+ tb_dump = traceback.format_exc()
+ if ajax_mode:
+ print str(tb_dump)
+ else:
+ SHELL_OUTPUT=str(tb_dump)
+ print CGISH_HTML % locals()
+
+def server_cli():
+ """This is the command line interface to starting the server.
+ This handles things if the script was not called as a CGI
+ (if you run it from the command line).
+ """
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?d', ['help','h','?', 'hostname=', 'username=', 'password=', 'port=', 'watch'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+
+ command_line_options = dict(optlist)
+ options = dict(optlist)
+ # There are a million ways to cry for help. These are but a few of them.
+ if [elem for elem in command_line_options if elem in ['-h','--h','-?','--?','--help']]:
+ exit_with_usage(0)
+
+ hostname = "127.0.0.1"
+ #port = 1664
+ username = os.getenv('USER')
+ password = ""
+ daemon_mode = False
+ if '-d' in options:
+ daemon_mode = True
+ if '--watch' in options:
+ watch_mode = True
+ else:
+ watch_mode = False
+ if '--hostname' in options:
+ hostname = options['--hostname']
+ if '--port' in options:
+ port = int(options['--port'])
+ if '--username' in options:
+ username = options['--username']
+ if '--password' in options:
+ password = options['--password']
+ else:
+ password = getpass.getpass('password: ')
+
+ server (hostname, username, password, '/tmp/mysock', daemon_mode)
+
+def random_sid ():
+ a=random.randint(0,65535)
+ b=random.randint(0,65535)
+ return '%04x%04x.sid' % (a,b)
+
+def parse_host_connect_string (hcs):
+ """This parses a host connection string in the form
+ username:password at hostname:port. All fields are options expcet hostname. A
+ dictionary is returned with all four keys. Keys that were not included are
+ set to empty strings ''. Note that if your password has the '@' character
+ then you must backslash escape it.
+ """
+ if '@' in hcs:
+ p = re.compile (r'(?P<username>[^@:]*)(:?)(?P<password>.*)(?!\\)@(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ else:
+ p = re.compile (r'(?P<username>)(?P<password>)(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ m = p.search (hcs)
+ d = m.groupdict()
+ d['password'] = d['password'].replace('\\@','@')
+ return d
+
+def pretty_box (s, rows=24, cols=80):
+ """This puts an ASCII text box around the given string.
+ """
+ top_bot = '+' + '-'*cols + '+\n'
+ return top_bot + '\n'.join(['|'+line+'|' for line in s.split('\n')]) + '\n' + top_bot
+
+def main ():
+ if os.getenv('REQUEST_METHOD') is None:
+ server_cli()
+ else:
+ client_cgi()
+
+# It's mostly HTML and Javascript from here on out.
+CGISH_HTML="""<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>%(TITLE)s %(SID)s</title>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<style type=text/css>
+a {color: #9f9; text-decoration: none}
+a:hover {color: #0f0}
+hr {color: #0f0}
+html,body,textarea,input,form
+{
+font-family: "Courier New", Courier, mono;
+font-size: 8pt;
+color: #0c0;
+background-color: #020;
+margin:0;
+padding:0;
+border:0;
+}
+input { background-color: #010; }
+textarea {
+border-width:1;
+border-style:solid;
+border-color:#0c0;
+padding:3;
+margin:3;
+}
+</style>
+
+<script language="JavaScript">
+function focus_first()
+{if (document.forms.length > 0)
+{var TForm = document.forms[0];
+for (i=0;i<TForm.length;i++){
+if ((TForm.elements[i].type=="text")||
+(TForm.elements[i].type=="textarea")||
+(TForm.elements[i].type.toString().charAt(0)=="s"))
+{document.forms[0].elements[i].focus();break;}}}}
+
+// JavaScript Virtual Keyboard
+// If you like this code then buy me a sandwich.
+// Noah Spurrier <noah at noah.org>
+var flag_shift=0;
+var flag_shiftlock=0;
+var flag_ctrl=0;
+var ButtonOnColor="#ee0";
+
+function init ()
+{
+ // hack to set quote key to show both single quote and double quote
+ document.form['quote'].value = "'" + ' "';
+ //refresh_screen();
+ poll();
+ document.form["cli"].focus();
+}
+function get_password ()
+{
+ var username = prompt("username?","");
+ var password = prompt("password?","");
+ start_server (username, password);
+}
+function multibrowser_ajax ()
+{
+ var xmlHttp = false;
+/*@cc_on @*/
+/*@if (@_jscript_version >= 5)
+ try
+ {
+ xmlHttp = new ActiveXObject("Msxml2.XMLHTTP");
+ }
+ catch (e)
+ {
+ try
+ {
+ xmlHttp = new ActiveXObject("Microsoft.XMLHTTP");
+ }
+ catch (e2)
+ {
+ xmlHttp = false;
+ }
+ }
+ at end @*/
+
+ if (!xmlHttp && typeof XMLHttpRequest != 'undefined')
+ {
+ xmlHttp = new XMLHttpRequest();
+ }
+ return xmlHttp;
+}
+function load_url_to_screen(url)
+{
+ xmlhttp = multibrowser_ajax();
+ //window.XMLHttpRequest?new XMLHttpRequest(): new ActiveXObject("Microsoft.XMLHTTP");
+ xmlhttp.onreadystatechange = update_virtual_screen;
+ xmlhttp.open("GET", url);
+ xmlhttp.setRequestHeader("If-Modified-Since", "Sat, 1 Jan 2000 00:00:00 GMT");
+ xmlhttp.send(null);
+}
+function update_virtual_screen()
+{
+ if ((xmlhttp.readyState == 4) && (xmlhttp.status == 200))
+ {
+ var screen_text = xmlhttp.responseText;
+ document.form["screen_text"].value = screen_text;
+ //var json_data = json_parse(xmlhttp.responseText);
+ }
+}
+function poll()
+{
+ refresh_screen();
+ timerID = setTimeout("poll()", 2000);
+ // clearTimeout(timerID);
+}
+//function start_server (username, password)
+//{
+// load_url_to_screen('cgishell.cgi?ajax=serverstart&username=' + escape(username) + '&password=' + escape(password);
+//}
+function refresh_screen()
+{
+ load_url_to_screen('cgishell.cgi?ajax=refresh&sid=%(SID)s');
+}
+function query_hash()
+{
+ load_url_to_screen('cgishell.cgi?ajax=hash&sid=%(SID)s');
+}
+function query_cursor()
+{
+ load_url_to_screen('cgishell.cgi?ajax=cursor&sid=%(SID)s');
+}
+function exit_server()
+{
+ load_url_to_screen('cgishell.cgi?ajax=exit&sid=%(SID)s');
+}
+function type_key (chars)
+{
+ var ch = '?';
+ if (flag_shiftlock || flag_shift)
+ {
+ ch = chars.substr(1,1);
+ }
+ else if (flag_ctrl)
+ {
+ ch = chars.substr(2,1);
+ }
+ else
+ {
+ ch = chars.substr(0,1);
+ }
+ load_url_to_screen('cgishell.cgi?ajax=send&sid=%(SID)s&arg=' + escape(ch));
+ if (flag_shift || flag_ctrl)
+ {
+ flag_shift = 0;
+ flag_ctrl = 0;
+ }
+ update_button_colors();
+}
+
+function key_shiftlock()
+{
+ flag_ctrl = 0;
+ flag_shift = 0;
+ if (flag_shiftlock)
+ {
+ flag_shiftlock = 0;
+ }
+ else
+ {
+ flag_shiftlock = 1;
+ }
+ update_button_colors();
+}
+
+function key_shift()
+{
+ if (flag_shift)
+ {
+ flag_shift = 0;
+ }
+ else
+ {
+ flag_ctrl = 0;
+ flag_shiftlock = 0;
+ flag_shift = 1;
+ }
+ update_button_colors();
+}
+function key_ctrl ()
+{
+ if (flag_ctrl)
+ {
+ flag_ctrl = 0;
+ }
+ else
+ {
+ flag_ctrl = 1;
+ flag_shiftlock = 0;
+ flag_shift = 0;
+ }
+
+ update_button_colors();
+}
+function update_button_colors ()
+{
+ if (flag_ctrl)
+ {
+ document.form['Ctrl'].style.backgroundColor = ButtonOnColor;
+ document.form['Ctrl2'].style.backgroundColor = ButtonOnColor;
+ }
+ else
+ {
+ document.form['Ctrl'].style.backgroundColor = document.form.style.backgroundColor;
+ document.form['Ctrl2'].style.backgroundColor = document.form.style.backgroundColor;
+ }
+ if (flag_shift)
+ {
+ document.form['Shift'].style.backgroundColor = ButtonOnColor;
+ document.form['Shift2'].style.backgroundColor = ButtonOnColor;
+ }
+ else
+ {
+ document.form['Shift'].style.backgroundColor = document.form.style.backgroundColor;
+ document.form['Shift2'].style.backgroundColor = document.form.style.backgroundColor;
+ }
+ if (flag_shiftlock)
+ {
+ document.form['ShiftLock'].style.backgroundColor = ButtonOnColor;
+ }
+ else
+ {
+ document.form['ShiftLock'].style.backgroundColor = document.form.style.backgroundColor;
+ }
+
+}
+function keyHandler(e)
+{
+ var pressedKey;
+ if (document.all) { e = window.event; }
+ if (document.layers) { pressedKey = e.which; }
+ if (document.all) { pressedKey = e.keyCode; }
+ pressedCharacter = String.fromCharCode(pressedKey);
+ type_key(pressedCharacter+pressedCharacter+pressedCharacter);
+ alert(pressedCharacter);
+// alert(' Character = ' + pressedCharacter + ' [Decimal value = ' + pressedKey + ']');
+}
+//document.onkeypress = keyHandler;
+//if (document.layers)
+// document.captureEvents(Event.KEYPRESS);
+//http://sniptools.com/jskeys
+//document.onkeyup = KeyCheck;
+function KeyCheck(e)
+{
+ var KeyID = (window.event) ? event.keyCode : e.keyCode;
+ type_key(String.fromCharCode(KeyID));
+ e.cancelBubble = true;
+ window.event.cancelBubble = true;
+}
+</script>
+
+</head>
+
+<body onload="init()">
+<form id="form" name="form" action="/cgi-bin/cgishell.cgi" method="POST">
+<input name="sid" value="%(SID)s" type="hidden">
+<textarea name="screen_text" cols="81" rows="25">%(SHELL_OUTPUT)s</textarea>
+<hr noshade="1">
+ <input name="cli" id="cli" type="text" size="80"><br>
+<table border="0" align="left">
+<tr>
+<td width="86%%" align="center">
+ <input name="submit" type="submit" value="Submit">
+ <input name="refresh" type="button" value="REFRESH" onclick="refresh_screen()">
+ <input name="refresh" type="button" value="CURSOR" onclick="query_cursor()">
+ <input name="hash" type="button" value="HASH" onclick="query_hash()">
+ <input name="exit" type="button" value="EXIT" onclick="exit_server()">
+ <br>
+ <input type="button" value="Esc" onclick="type_key('\\x1b\\x1b')" />
+ <input type="button" value="` ~" onclick="type_key('`~')" />
+ <input type="button" value="1!" onclick="type_key('1!')" />
+ <input type="button" value="2@" onclick="type_key('2@\\x00')" />
+ <input type="button" value="3#" onclick="type_key('3#')" />
+ <input type="button" value="4$" onclick="type_key('4$')" />
+ <input type="button" value="5%%" onclick="type_key('5%%')" />
+ <input type="button" value="6^" onclick="type_key('6^\\x1E')" />
+ <input type="button" value="7&" onclick="type_key('7&')" />
+ <input type="button" value="8*" onclick="type_key('8*')" />
+ <input type="button" value="9(" onclick="type_key('9(')" />
+ <input type="button" value="0)" onclick="type_key('0)')" />
+ <input type="button" value="-_" onclick="type_key('-_\\x1F')" />
+ <input type="button" value="=+" onclick="type_key('=+')" />
+ <input type="button" value="BkSp" onclick="type_key('\\x08\\x08\\x08')" />
+ <br>
+ <input type="button" value="Tab" onclick="type_key('\\t\\t')" />
+ <input type="button" value="Q" onclick="type_key('qQ\\x11')" />
+ <input type="button" value="W" onclick="type_key('wW\\x17')" />
+ <input type="button" value="E" onclick="type_key('eE\\x05')" />
+ <input type="button" value="R" onclick="type_key('rR\\x12')" />
+ <input type="button" value="T" onclick="type_key('tT\\x14')" />
+ <input type="button" value="Y" onclick="type_key('yY\\x19')" />
+ <input type="button" value="U" onclick="type_key('uU\\x15')" />
+ <input type="button" value="I" onclick="type_key('iI\\x09')" />
+ <input type="button" value="O" onclick="type_key('oO\\x0F')" />
+ <input type="button" value="P" onclick="type_key('pP\\x10')" />
+ <input type="button" value="[ {" onclick="type_key('[{\\x1b')" />
+ <input type="button" value="] }" onclick="type_key(']}\\x1d')" />
+ <input type="button" value="\\ |" onclick="type_key('\\\\|\\x1c')" />
+ <br>
+ <input type="button" id="Ctrl" value="Ctrl" onclick="key_ctrl()" />
+ <input type="button" value="A" onclick="type_key('aA\\x01')" />
+ <input type="button" value="S" onclick="type_key('sS\\x13')" />
+ <input type="button" value="D" onclick="type_key('dD\\x04')" />
+ <input type="button" value="F" onclick="type_key('fF\\x06')" />
+ <input type="button" value="G" onclick="type_key('gG\\x07')" />
+ <input type="button" value="H" onclick="type_key('hH\\x08')" />
+ <input type="button" value="J" onclick="type_key('jJ\\x0A')" />
+ <input type="button" value="K" onclick="type_key('kK\\x0B')" />
+ <input type="button" value="L" onclick="type_key('lL\\x0C')" />
+ <input type="button" value="; :" onclick="type_key(';:')" />
+ <input type="button" id="quote" value="'" onclick="type_key('\\x27\\x22')" />
+ <input type="button" value="Enter" onclick="type_key('\\n\\n')" />
+ <br>
+ <input type="button" id="ShiftLock" value="Caps Lock" onclick="key_shiftlock()" />
+ <input type="button" id="Shift" value="Shift" onclick="key_shift()" />
+ <input type="button" value="Z" onclick="type_key('zZ\\x1A')" />
+ <input type="button" value="X" onclick="type_key('xX\\x18')" />
+ <input type="button" value="C" onclick="type_key('cC\\x03')" />
+ <input type="button" value="V" onclick="type_key('vV\\x16')" />
+ <input type="button" value="B" onclick="type_key('bB\\x02')" />
+ <input type="button" value="N" onclick="type_key('nN\\x0E')" />
+ <input type="button" value="M" onclick="type_key('mM\\x0D')" />
+ <input type="button" value=", <" onclick="type_key(',<')" />
+ <input type="button" value=". >" onclick="type_key('.>')" />
+ <input type="button" value="/ ?" onclick="type_key('/?')" />
+ <input type="button" id="Shift2" value="Shift" onclick="key_shift()" />
+ <input type="button" id="Ctrl2" value="Ctrl" onclick="key_ctrl()" />
+ <br>
+ <input type="button" value=" FINAL FRONTIER " onclick="type_key(' ')" />
+</td>
+</tr>
+</table>
+</form>
+</body>
+</html>
+"""
+
+LOGIN_HTML="""<html>
+<head>
+<title>Shell Login</title>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<style type=text/css>
+a {color: #9f9; text-decoration: none}
+a:hover {color: #0f0}
+hr {color: #0f0}
+html,body,textarea,input,form
+{
+font-family: "Courier New", Courier, mono;
+font-size: 8pt;
+color: #0c0;
+background-color: #020;
+margin:3;
+padding:0;
+border:0;
+}
+input { background-color: #010; }
+input,textarea {
+border-width:1;
+border-style:solid;
+border-color:#0c0;
+padding:3;
+margin:3;
+}
+</style>
+<script language="JavaScript">
+function init ()
+{
+ document.login_form["username"].focus();
+}
+</script>
+</head>
+<body onload="init()">
+<form name="login_form" method="POST">
+<input name="start_server" value="1" type="hidden">
+<input name="sid" value="%(SID)s" type="hidden">
+username: <input name="username" type="text" size="30"><br>
+password: <input name="password" type="password" size="30"><br>
+<input name="submit" type="submit" value="enter">
+</form>
+<br>
+</body>
+</html>
+"""
+
+if __name__ == "__main__":
+ try:
+ main()
+ except Exception, e:
+ print str(e)
+ tb_dump = traceback.format_exc()
+ print str(tb_dump)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/cgishell.cgi
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/chess.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/chess.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/chess.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/chess.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,131 @@
+#!/usr/bin/env python
+
+'''This demonstrates controlling a screen oriented application (curses).
+It starts two instances of gnuchess and then pits them against each other.
+'''
+
+import pexpect
+import string
+import ANSI
+
+REGEX_MOVE = '(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)'
+REGEX_MOVE_PART = '(?:[0-9]|\x1b\[C)(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)'
+
+class Chess:
+
+ def __init__(self, engine = "/usr/local/bin/gnuchess -a -h 1"):
+ self.child = pexpect.spawn (engine)
+ self.term = ANSI.ANSI ()
+
+ self.child.expect ('Chess')
+ if self.child.after != 'Chess':
+ raise IOError, 'incompatible chess program'
+ self.term.process_list (self.before)
+ self.term.process_list (self.after)
+ self.last_computer_move = ''
+ def read_until_cursor (self, r,c)
+ while 1:
+ self.child.read(1, 60)
+ self.term.process (c)
+ if self.term.cur_r == r and self.term.cur_c == c:
+ return 1
+
+ def do_first_move (self, move):
+ self.child.expect ('Your move is')
+ self.child.sendline (move)
+ self.term.process_list (self.before)
+ self.term.process_list (self.after)
+ return move
+
+ def do_move (self, move):
+ read_until_cursor (19,60)
+ #self.child.expect ('\[19;60H')
+ self.child.sendline (move)
+ print 'do_move' move
+ return move
+
+ def get_first_computer_move (self):
+ self.child.expect ('My move is')
+ self.child.expect (REGEX_MOVE)
+# print '', self.child.after
+ return self.child.after
+
+ def get_computer_move (self):
+ print 'Here'
+ i = self.child.expect (['\[17;59H', '\[17;58H'])
+ print i
+ if i == 0:
+ self.child.expect (REGEX_MOVE)
+ if len(self.child.after) < 4:
+ self.child.after = self.child.after + self.last_computer_move[3]
+ if i == 1:
+ self.child.expect (REGEX_MOVE_PART)
+ self.child.after = self.last_computer_move[0] + self.child.after
+ print '', self.child.after
+ self.last_computer_move = self.child.after
+ return self.child.after
+
+ def switch (self):
+ self.child.sendline ('switch')
+
+ def set_depth (self, depth):
+ self.child.sendline ('depth')
+ self.child.expect ('depth=')
+ self.child.sendline ('%d' % depth)
+
+ def quit(self):
+ self.child.sendline ('quit')
+import sys, os
+print 'Starting...'
+white = Chess()
+white.child.echo = 1
+white.child.expect ('Your move is')
+white.set_depth(2)
+white.switch()
+
+move_white = white.get_first_computer_move()
+print 'first move white:', move_white
+
+white.do_move ('e7e5')
+move_white = white.get_computer_move()
+print 'move white:', move_white
+white.do_move ('f8c5')
+move_white = white.get_computer_move()
+print 'move white:', move_white
+white.do_move ('b8a6')
+move_white = white.get_computer_move()
+print 'move white:', move_white
+
+sys.exit(1)
+
+
+
+black = Chess()
+white = Chess()
+white.child.expect ('Your move is')
+white.switch()
+
+move_white = white.get_first_computer_move()
+print 'first move white:', move_white
+
+black.do_first_move (move_white)
+move_black = black.get_first_computer_move()
+print 'first move black:', move_black
+
+white.do_move (move_black)
+
+done = 0
+while not done:
+ move_white = white.get_computer_move()
+ print 'move white:', move_white
+
+ black.do_move (move_white)
+ move_black = black.get_computer_move()
+ print 'move black:', move_black
+
+ white.do_move (move_black)
+ print 'tail of loop'
+
+g.quit()
+
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/chess.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/chess2.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/chess2.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/chess2.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/chess2.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,131 @@
+#!/usr/bin/env python
+
+'''This demonstrates controlling a screen oriented application (curses).
+It starts two instances of gnuchess and then pits them against each other.
+'''
+
+import pexpect
+import string
+import ANSI
+import sys, os, time
+
+class Chess:
+
+ def __init__(self, engine = "/usr/local/bin/gnuchess -a -h 1"):
+ self.child = pexpect.spawn (engine)
+ self.term = ANSI.ANSI ()
+
+ #self.child.expect ('Chess')
+ #if self.child.after != 'Chess':
+ # raise IOError, 'incompatible chess program'
+ #self.term.process_list (self.child.before)
+ #self.term.process_list (self.child.after)
+
+ self.last_computer_move = ''
+
+ def read_until_cursor (self, r,c, e=0):
+ '''Eventually something like this should move into the screen class or
+ a subclass. Maybe a combination of pexpect and screen...
+ '''
+ fout = open ('log','a')
+ while self.term.cur_r != r or self.term.cur_c != c:
+ try:
+ k = self.child.read(1, 10)
+ except Exception, e:
+ print 'EXCEPTION, (r,c):(%d,%d)\n' %(self.term.cur_r, self.term.cur_c)
+ sys.stdout.flush()
+ self.term.process (k)
+ fout.write ('(r,c):(%d,%d)\n' %(self.term.cur_r, self.term.cur_c))
+ fout.flush()
+ if e:
+ sys.stdout.write (k)
+ sys.stdout.flush()
+ if self.term.cur_r == r and self.term.cur_c == c:
+ fout.close()
+ return 1
+ print 'DIDNT EVEN HIT.'
+ fout.close()
+ return 1
+
+ def expect_region (self):
+ '''This is another method that would be moved into the
+ screen class.
+ '''
+ pass
+ def do_scan (self):
+ fout = open ('log','a')
+ while 1:
+ c = self.child.read(1,10)
+ self.term.process (c)
+ fout.write ('(r,c):(%d,%d)\n' %(self.term.cur_r, self.term.cur_c))
+ fout.flush()
+ sys.stdout.write (c)
+ sys.stdout.flush()
+
+ def do_move (self, move, e = 0):
+ time.sleep(1)
+ self.read_until_cursor (19,60, e)
+ self.child.sendline (move)
+
+ def wait (self, color):
+ while 1:
+ r = self.term.get_region (14,50,14,60)[0]
+ r = r.strip()
+ if r == color:
+ return
+ time.sleep (1)
+
+ def parse_computer_move (self, s):
+ i = s.find ('is: ')
+ cm = s[i+3:i+9]
+ return cm
+ def get_computer_move (self, e = 0):
+ time.sleep(1)
+ self.read_until_cursor (19,60, e)
+ time.sleep(1)
+ r = self.term.get_region (17,50,17,62)[0]
+ cm = self.parse_computer_move (r)
+ return cm
+
+ def switch (self):
+ print 'switching'
+ self.child.sendline ('switch')
+
+ def set_depth (self, depth):
+ self.child.sendline ('depth')
+ self.child.expect ('depth=')
+ self.child.sendline ('%d' % depth)
+
+ def quit(self):
+ self.child.sendline ('quit')
+
+def LOG (s):
+ print s
+ sys.stdout.flush ()
+ fout = open ('moves.log', 'a')
+ fout.write (s + '\n')
+ fout.close()
+
+print 'Starting...'
+
+black = Chess()
+white = Chess()
+white.read_until_cursor (19,60,1)
+white.switch()
+
+done = 0
+while not done:
+ white.wait ('Black')
+ move_white = white.get_computer_move(1)
+ LOG ( 'move white:'+ move_white )
+
+ black.do_move (move_white)
+ black.wait ('White')
+ move_black = black.get_computer_move()
+ LOG ( 'move black:'+ move_black )
+
+ white.do_move (move_black, 1)
+
+g.quit()
+
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/chess2.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/chess3.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/chess3.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/chess3.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/chess3.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,138 @@
+#!/usr/bin/env python
+
+'''This demonstrates controlling a screen oriented application (curses).
+It starts two instances of gnuchess and then pits them against each other.
+'''
+
+import pexpect
+import string
+import ANSI
+
+REGEX_MOVE = '(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)'
+REGEX_MOVE_PART = '(?:[0-9]|\x1b\[C)(?:[a-z]|\x1b\[C)(?:[0-9]|\x1b\[C)'
+
+class Chess:
+
+ def __init__(self, engine = "/usr/local/bin/gnuchess -a -h 1"):
+ self.child = pexpect.spawn (engine)
+ self.term = ANSI.ANSI ()
+
+# self.child.expect ('Chess')
+ # if self.child.after != 'Chess':
+ # raise IOError, 'incompatible chess program'
+ # self.term.process_list (self.before)
+ # self.term.process_list (self.after)
+ self.last_computer_move = ''
+ def read_until_cursor (self, r,c):
+ fout = open ('log','a')
+ while 1:
+ k = self.child.read(1, 10)
+ self.term.process (k)
+ fout.write ('(r,c):(%d,%d)\n' %(self.term.cur_r, self.term.cur_c))
+ fout.flush()
+ if self.term.cur_r == r and self.term.cur_c == c:
+ fout.close()
+ return 1
+ sys.stdout.write (k)
+ sys.stdout.flush()
+
+ def do_scan (self):
+ fout = open ('log','a')
+ while 1:
+ c = self.child.read(1,10)
+ self.term.process (c)
+ fout.write ('(r,c):(%d,%d)\n' %(self.term.cur_r, self.term.cur_c))
+ fout.flush()
+ sys.stdout.write (c)
+ sys.stdout.flush()
+
+ def do_move (self, move):
+ self.read_until_cursor (19,60)
+ self.child.sendline (move)
+ return move
+
+ def get_computer_move (self):
+ print 'Here'
+ i = self.child.expect (['\[17;59H', '\[17;58H'])
+ print i
+ if i == 0:
+ self.child.expect (REGEX_MOVE)
+ if len(self.child.after) < 4:
+ self.child.after = self.child.after + self.last_computer_move[3]
+ if i == 1:
+ self.child.expect (REGEX_MOVE_PART)
+ self.child.after = self.last_computer_move[0] + self.child.after
+ print '', self.child.after
+ self.last_computer_move = self.child.after
+ return self.child.after
+
+ def switch (self):
+ self.child.sendline ('switch')
+
+ def set_depth (self, depth):
+ self.child.sendline ('depth')
+ self.child.expect ('depth=')
+ self.child.sendline ('%d' % depth)
+
+ def quit(self):
+ self.child.sendline ('quit')
+import sys, os
+print 'Starting...'
+white = Chess()
+white.do_move('b2b4')
+white.read_until_cursor (19,60)
+c1 = white.term.get_abs(17,58)
+c2 = white.term.get_abs(17,59)
+c3 = white.term.get_abs(17,60)
+c4 = white.term.get_abs(17,61)
+fout = open ('log','a')
+fout.write ('Computer:%s%s%s%s\n' %(c1,c2,c3,c4))
+fout.close()
+white.do_move('c2c4')
+white.read_until_cursor (19,60)
+c1 = white.term.get_abs(17,58)
+c2 = white.term.get_abs(17,59)
+c3 = white.term.get_abs(17,60)
+c4 = white.term.get_abs(17,61)
+fout = open ('log','a')
+fout.write ('Computer:%s%s%s%s\n' %(c1,c2,c3,c4))
+fout.close()
+white.do_scan ()
+
+#white.do_move ('b8a6')
+#move_white = white.get_computer_move()
+#print 'move white:', move_white
+
+sys.exit(1)
+
+
+
+black = Chess()
+white = Chess()
+white.child.expect ('Your move is')
+white.switch()
+
+move_white = white.get_first_computer_move()
+print 'first move white:', move_white
+
+black.do_first_move (move_white)
+move_black = black.get_first_computer_move()
+print 'first move black:', move_black
+
+white.do_move (move_black)
+
+done = 0
+while not done:
+ move_white = white.get_computer_move()
+ print 'move white:', move_white
+
+ black.do_move (move_white)
+ move_black = black.get_computer_move()
+ print 'move black:', move_black
+
+ white.do_move (move_black)
+ print 'tail of loop'
+
+g.quit()
+
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/chess3.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/df.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/df.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/df.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/df.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,34 @@
+#!/usr/bin/env python
+
+"""This collects filesystem capacity info using the 'df' command. Tuples of
+filesystem name and percentage are stored in a list. A simple report is
+printed. Filesystems over 95% capacity are highlighted. Note that this does not
+parse filesystem names after the first space, so names with spaces in them will
+be truncated. This will produce ambiguous results for automount filesystems on
+Apple OSX. """
+
+import pexpect
+
+child = pexpect.spawn ('df')
+
+# parse 'df' output into a list.
+pattern = "\n(\S+).*?([0-9]+)%"
+filesystem_list = []
+for dummy in range (0, 1000):
+ i = child.expect ([pattern, pexpect.EOF])
+ if i == 0:
+ filesystem_list.append (child.match.groups())
+ else:
+ break
+
+# Print report
+print
+for m in filesystem_list:
+ s = "Filesystem %s is at %s%%" % (m[0], m[1])
+ # highlight filesystems over 95% capacity
+ if int(m[1]) > 95:
+ s = '! ' + s
+ else:
+ s = ' ' + s
+ print s
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/df.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,95 @@
+#!/usr/bin/env python
+
+"""This is for cleaning up binary files improperly added to CVS. This script
+scans the given path to find binary files; checks with CVS to see if the sticky
+options are set to -kb; finally if sticky options are not -kb then uses 'cvs
+admin' to set the -kb option.
+
+This script ignores CVS directories, symbolic links, and files not known under
+CVS control (cvs status is 'Unknown').
+
+Run this on a CHECKED OUT module sandbox, not on the repository itself. After
+if fixes the sticky options on any files you should manually do a 'cvs commit'
+to accept the changes. Then be sure to have all users do a 'cvs up -A' to
+update the Sticky Option status.
+
+Noah Spurrier
+20030426
+"""
+
+import os, sys, time
+import pexpect
+
+VERBOSE = 1
+
+def is_binary (filename):
+
+ """Assume that any file with a character where the 8th bit is set is
+ binary. """
+
+ fin = open(filename, 'rb')
+ wholething = fin.read()
+ fin.close()
+ for c in wholething:
+ if ord(c) & 0x80:
+ return 1
+ return 0
+
+def is_kb_sticky (filename):
+
+ """This checks if 'cvs status' reports '-kb' for Sticky options. If the
+ Sticky Option status is '-ks' then this returns 1. If the status is
+ 'Unknown' then it returns 1. Otherwise 0 is returned. """
+
+ try:
+ s = pexpect.spawn ('cvs status %s' % filename)
+ i = s.expect (['Sticky Options:\s*(.*)\r\n', 'Status: Unknown'])
+ if i==1 and VERBOSE:
+ print 'File not part of CVS repository:', filename
+ return 1 # Pretend it's OK.
+ if s.match.group(1) == '-kb':
+ return 1
+ s = None
+ except:
+ print 'Something went wrong trying to run external cvs command.'
+ print ' cvs status %s' % filename
+ print 'The cvs command returned:'
+ print s.before
+ return 0
+
+def cvs_admin_kb (filename):
+
+ """This uses 'cvs admin' to set the '-kb' sticky option. """
+
+ s = pexpect.run ('cvs admin -kb %s' % filename)
+ # There is a timing issue. If I run 'cvs admin' too quickly
+ # cvs sometimes has trouble obtaining the directory lock.
+ time.sleep(1)
+
+def walk_and_clean_cvs_binaries (arg, dirname, names):
+
+ """This contains the logic for processing files. This is the os.path.walk
+ callback. This skips dirnames that end in CVS. """
+
+ if len(dirname)>3 and dirname[-3:]=='CVS':
+ return
+ for n in names:
+ fullpath = os.path.join (dirname, n)
+ if os.path.isdir(fullpath) or os.path.islink(fullpath):
+ continue
+ if is_binary(fullpath):
+ if not is_kb_sticky (fullpath):
+ if VERBOSE: print fullpath
+ cvs_admin_kb (fullpath)
+
+def main ():
+
+ if len(sys.argv) == 1:
+ root = '.'
+ else:
+ root = sys.argv[1]
+ os.path.walk (root, walk_and_clean_cvs_binaries, None)
+
+if __name__ == '__main__':
+ main ()
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/fix_cvs_files.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/ftp.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/ftp.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/ftp.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/ftp.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,47 @@
+#!/usr/bin/env python
+
+"""This demonstrates an FTP "bookmark". This connects to an ftp site; does a
+few ftp stuff; and then gives the user interactive control over the session. In
+this case the "bookmark" is to a directory on the OpenBSD ftp server. It puts
+you in the i386 packages directory. You can easily modify this for other sites.
+"""
+
+import pexpect
+import sys
+
+child = pexpect.spawn('ftp ftp.openbsd.org')
+child.expect('(?i)name .*: ')
+child.sendline('anonymous')
+child.expect('(?i)password')
+child.sendline('pexpect at sourceforge.net')
+child.expect('ftp> ')
+child.sendline('cd /pub/OpenBSD/3.7/packages/i386')
+child.expect('ftp> ')
+child.sendline('bin')
+child.expect('ftp> ')
+child.sendline('prompt')
+child.expect('ftp> ')
+child.sendline('pwd')
+child.expect('ftp> ')
+print("Escape character is '^]'.\n")
+sys.stdout.write (child.after)
+sys.stdout.flush()
+child.interact() # Escape character defaults to ^]
+# At this point this script blocks until the user presses the escape character
+# or until the child exits. The human user and the child should be talking
+# to each other now.
+
+# At this point the script is running again.
+print 'Left interactve mode.'
+
+# The rest is not strictly necessary. This just demonstrates a few functions.
+# This makes sure the child is dead; although it would be killed when Python exits.
+if child.isalive():
+ child.sendline('bye') # Try to ask ftp child to exit.
+ child.close()
+# Print the final state of the child. Normally isalive() should be FALSE.
+if child.isalive():
+ print 'Child did not exit gracefully.'
+else:
+ print 'Child exited gracefully.'
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/ftp.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/hive.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/hive.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/hive.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/hive.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,437 @@
+#!/usr/bin/env python
+
+"""hive -- Hive Shell
+
+This lets you ssh to a group of servers and control them as if they were one.
+Each command you enter is sent to each host in parallel. The response of each
+host is collected and printed. In normal synchronous mode Hive will wait for
+each host to return the shell command line prompt. The shell prompt is used to
+sync output.
+
+Example:
+
+ $ hive.py --sameuser --samepass host1.example.com host2.example.net
+ username: myusername
+ password:
+ connecting to host1.example.com - OK
+ connecting to host2.example.net - OK
+ targetting hosts: 192.168.1.104 192.168.1.107
+ CMD (? for help) > uptime
+ =======================================================================
+ host1.example.com
+ -----------------------------------------------------------------------
+ uptime
+ 23:49:55 up 74 days, 5:14, 2 users, load average: 0.15, 0.05, 0.01
+ =======================================================================
+ host2.example.net
+ -----------------------------------------------------------------------
+ uptime
+ 23:53:02 up 1 day, 13:36, 2 users, load average: 0.50, 0.40, 0.46
+ =======================================================================
+
+Other Usage Examples:
+
+1. You will be asked for your username and password for each host.
+
+ hive.py host1 host2 host3 ... hostN
+
+2. You will be asked once for your username and password.
+ This will be used for each host.
+
+ hive.py --sameuser --samepass host1 host2 host3 ... hostN
+
+3. Give a username and password on the command-line:
+
+ hive.py user1:pass2 at host1 user2:pass2 at host2 ... userN:passN at hostN
+
+You can use an extended host notation to specify username, password, and host
+instead of entering auth information interactively. Where you would enter a
+host name use this format:
+
+ username:password at host
+
+This assumes that ':' is not part of the password. If your password contains a
+':' then you can use '\\:' to indicate a ':' and '\\\\' to indicate a single
+'\\'. Remember that this information will appear in the process listing. Anyone
+on your machine can see this auth information. This is not secure.
+
+This is a crude script that begs to be multithreaded. But it serves its
+purpose.
+
+Noah Spurrier
+
+$Id: hive.py 509 2008-01-05 21:27:47Z noah $
+"""
+
+# TODO add feature to support username:password at host combination
+# TODO add feature to log each host output in separate file
+
+import sys, os, re, optparse, traceback, types, time, getpass
+import pexpect, pxssh
+import readline, atexit
+
+#histfile = os.path.join(os.environ["HOME"], ".hive_history")
+#try:
+# readline.read_history_file(histfile)
+#except IOError:
+# pass
+#atexit.register(readline.write_history_file, histfile)
+
+CMD_HELP="""Hive commands are preceded by a colon : (just think of vi).
+
+:target name1 name2 name3 ...
+
+ set list of hosts to target commands
+
+:target all
+
+ reset list of hosts to target all hosts in the hive.
+
+:to name command
+
+ send a command line to the named host. This is similar to :target, but
+ sends only one command and does not change the list of targets for future
+ commands.
+
+:sync
+
+ set mode to wait for shell prompts after commands are run. This is the
+ default. When Hive first logs into a host it sets a special shell prompt
+ pattern that it can later look for to synchronize output of the hosts. If
+ you 'su' to another user then it can upset the synchronization. If you need
+ to run something like 'su' then use the following pattern:
+
+ CMD (? for help) > :async
+ CMD (? for help) > sudo su - root
+ CMD (? for help) > :prompt
+ CMD (? for help) > :sync
+
+:async
+
+ set mode to not expect command line prompts (see :sync). Afterwards
+ commands are send to target hosts, but their responses are not read back
+ until :sync is run. This is useful to run before commands that will not
+ return with the special shell prompt pattern that Hive uses to synchronize.
+
+:refresh
+
+ refresh the display. This shows the last few lines of output from all hosts.
+ This is similar to resync, but does not expect the promt. This is useful
+ for seeing what hosts are doing during long running commands.
+
+:resync
+
+ This is similar to :sync, but it does not change the mode. It looks for the
+ prompt and thus consumes all input from all targetted hosts.
+
+:prompt
+
+ force each host to reset command line prompt to the special pattern used to
+ synchronize all the hosts. This is useful if you 'su' to a different user
+ where Hive would not know the prompt to match.
+
+:send my text
+
+ This will send the 'my text' wihtout a line feed to the targetted hosts.
+ This output of the hosts is not automatically synchronized.
+
+:control X
+
+ This will send the given control character to the targetted hosts.
+ For example, ":control c" will send ASCII 3.
+
+:exit
+
+ This will exit the hive shell.
+
+"""
+
+def login (args, cli_username=None, cli_password=None):
+
+ # I have to keep a separate list of host names because Python dicts are not ordered.
+ # I want to keep the same order as in the args list.
+ host_names = []
+ hive_connect_info = {}
+ hive = {}
+ # build up the list of connection information (hostname, username, password, port)
+ for host_connect_string in args:
+ hcd = parse_host_connect_string (host_connect_string)
+ hostname = hcd['hostname']
+ port = hcd['port']
+ if port == '':
+ port = None
+ if len(hcd['username']) > 0:
+ username = hcd['username']
+ elif cli_username is not None:
+ username = cli_username
+ else:
+ username = raw_input('%s username: ' % hostname)
+ if len(hcd['password']) > 0:
+ password = hcd['password']
+ elif cli_password is not None:
+ password = cli_password
+ else:
+ password = getpass.getpass('%s password: ' % hostname)
+ host_names.append(hostname)
+ hive_connect_info[hostname] = (hostname, username, password, port)
+ # build up the list of hive connections using the connection information.
+ for hostname in host_names:
+ print 'connecting to', hostname
+ try:
+ fout = file("log_"+hostname, "w")
+ hive[hostname] = pxssh.pxssh()
+ hive[hostname].login(*hive_connect_info[hostname])
+ print hive[hostname].before
+ hive[hostname].logfile = fout
+ print '- OK'
+ except Exception, e:
+ print '- ERROR',
+ print str(e)
+ print 'Skipping', hostname
+ hive[hostname] = None
+ return host_names, hive
+
+def main ():
+
+ global options, args, CMD_HELP
+
+ if options.sameuser:
+ cli_username = raw_input('username: ')
+ else:
+ cli_username = None
+
+ if options.samepass:
+ cli_password = getpass.getpass('password: ')
+ else:
+ cli_password = None
+
+ host_names, hive = login(args, cli_username, cli_password)
+
+ synchronous_mode = True
+ target_hostnames = host_names[:]
+ print 'targetting hosts:', ' '.join(target_hostnames)
+ while True:
+ cmd = raw_input('CMD (? for help) > ')
+ cmd = cmd.strip()
+ if cmd=='?' or cmd==':help' or cmd==':h':
+ print CMD_HELP
+ continue
+ elif cmd==':refresh':
+ refresh (hive, target_hostnames, timeout=0.5)
+ for hostname in target_hostnames:
+ if hive[hostname] is None:
+ print '/============================================================================='
+ print '| ' + hostname + ' is DEAD'
+ print '\\-----------------------------------------------------------------------------'
+ else:
+ print '/============================================================================='
+ print '| ' + hostname
+ print '\\-----------------------------------------------------------------------------'
+ print hive[hostname].before
+ print '=============================================================================='
+ continue
+ elif cmd==':resync':
+ resync (hive, target_hostnames, timeout=0.5)
+ for hostname in target_hostnames:
+ if hive[hostname] is None:
+ print '/============================================================================='
+ print '| ' + hostname + ' is DEAD'
+ print '\\-----------------------------------------------------------------------------'
+ else:
+ print '/============================================================================='
+ print '| ' + hostname
+ print '\\-----------------------------------------------------------------------------'
+ print hive[hostname].before
+ print '=============================================================================='
+ continue
+ elif cmd==':sync':
+ synchronous_mode = True
+ resync (hive, target_hostnames, timeout=0.5)
+ continue
+ elif cmd==':async':
+ synchronous_mode = False
+ continue
+ elif cmd==':prompt':
+ for hostname in target_hostnames:
+ try:
+ if hive[hostname] is not None:
+ hive[hostname].set_unique_prompt()
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ continue
+ elif cmd[:5] == ':send':
+ cmd, txt = cmd.split(None,1)
+ for hostname in target_hostnames:
+ try:
+ if hive[hostname] is not None:
+ hive[hostname].send(txt)
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ continue
+ elif cmd[:3] == ':to':
+ cmd, hostname, txt = cmd.split(None,2)
+ if hive[hostname] is None:
+ print '/============================================================================='
+ print '| ' + hostname + ' is DEAD'
+ print '\\-----------------------------------------------------------------------------'
+ continue
+ try:
+ hive[hostname].sendline (txt)
+ hive[hostname].prompt(timeout=2)
+ print '/============================================================================='
+ print '| ' + hostname
+ print '\\-----------------------------------------------------------------------------'
+ print hive[hostname].before
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ continue
+ elif cmd[:7] == ':expect':
+ cmd, pattern = cmd.split(None,1)
+ print 'looking for', pattern
+ try:
+ for hostname in target_hostnames:
+ if hive[hostname] is not None:
+ hive[hostname].expect(pattern)
+ print hive[hostname].before
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ continue
+ elif cmd[:7] == ':target':
+ target_hostnames = cmd.split()[1:]
+ if len(target_hostnames) == 0 or target_hostnames[0] == all:
+ target_hostnames = host_names[:]
+ print 'targetting hosts:', ' '.join(target_hostnames)
+ continue
+ elif cmd == ':exit' or cmd == ':q' or cmd == ':quit':
+ break
+ elif cmd[:8] == ':control' or cmd[:5] == ':ctrl' :
+ cmd, c = cmd.split(None,1)
+ if ord(c)-96 < 0 or ord(c)-96 > 255:
+ print '/============================================================================='
+ print '| Invalid character. Must be [a-zA-Z], @, [, ], \\, ^, _, or ?'
+ print '\\-----------------------------------------------------------------------------'
+ continue
+ for hostname in target_hostnames:
+ try:
+ if hive[hostname] is not None:
+ hive[hostname].sendcontrol(c)
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ continue
+ elif cmd == ':esc':
+ for hostname in target_hostnames:
+ if hive[hostname] is not None:
+ hive[hostname].send(chr(27))
+ continue
+ #
+ # Run the command on all targets in parallel
+ #
+ for hostname in target_hostnames:
+ try:
+ if hive[hostname] is not None:
+ hive[hostname].sendline (cmd)
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+
+ #
+ # print the response for each targeted host.
+ #
+ if synchronous_mode:
+ for hostname in target_hostnames:
+ try:
+ if hive[hostname] is None:
+ print '/============================================================================='
+ print '| ' + hostname + ' is DEAD'
+ print '\\-----------------------------------------------------------------------------'
+ else:
+ hive[hostname].prompt(timeout=2)
+ print '/============================================================================='
+ print '| ' + hostname
+ print '\\-----------------------------------------------------------------------------'
+ print hive[hostname].before
+ except Exception, e:
+ print "Had trouble communicating with %s, so removing it from the target list." % hostname
+ print str(e)
+ hive[hostname] = None
+ print '=============================================================================='
+
+def refresh (hive, hive_names, timeout=0.5):
+
+ """This waits for the TIMEOUT on each host.
+ """
+
+ # TODO This is ideal for threading.
+ for hostname in hive_names:
+ hive[hostname].expect([pexpect.TIMEOUT,pexpect.EOF],timeout=timeout)
+
+def resync (hive, hive_names, timeout=2, max_attempts=5):
+
+ """This waits for the shell prompt for each host in an effort to try to get
+ them all to the same state. The timeout is set low so that hosts that are
+ already at the prompt will not slow things down too much. If a prompt match
+ is made for a hosts then keep asking until it stops matching. This is a
+ best effort to consume all input if it printed more than one prompt. It's
+ kind of kludgy. Note that this will always introduce a delay equal to the
+ timeout for each machine. So for 10 machines with a 2 second delay you will
+ get AT LEAST a 20 second delay if not more. """
+
+ # TODO This is ideal for threading.
+ for hostname in hive_names:
+ for attempts in xrange(0, max_attempts):
+ if not hive[hostname].prompt(timeout=timeout):
+ break
+
+def parse_host_connect_string (hcs):
+
+ """This parses a host connection string in the form
+ username:password at hostname:port. All fields are options expcet hostname. A
+ dictionary is returned with all four keys. Keys that were not included are
+ set to empty strings ''. Note that if your password has the '@' character
+ then you must backslash escape it. """
+
+ if '@' in hcs:
+ p = re.compile (r'(?P<username>[^@:]*)(:?)(?P<password>.*)(?!\\)@(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ else:
+ p = re.compile (r'(?P<username>)(?P<password>)(?P<hostname>[^:]*):?(?P<port>[0-9]*)')
+ m = p.search (hcs)
+ d = m.groupdict()
+ d['password'] = d['password'].replace('\\@','@')
+ return d
+
+if __name__ == '__main__':
+ try:
+ start_time = time.time()
+ parser = optparse.OptionParser(formatter=optparse.TitledHelpFormatter(), usage=globals()['__doc__'], version='$Id: hive.py 509 2008-01-05 21:27:47Z noah $',conflict_handler="resolve")
+ parser.add_option ('-v', '--verbose', action='store_true', default=False, help='verbose output')
+ parser.add_option ('--samepass', action='store_true', default=False, help='Use same password for each login.')
+ parser.add_option ('--sameuser', action='store_true', default=False, help='Use same username for each login.')
+ (options, args) = parser.parse_args()
+ if len(args) < 1:
+ parser.error ('missing argument')
+ if options.verbose: print time.asctime()
+ main()
+ if options.verbose: print time.asctime()
+ if options.verbose: print 'TOTAL TIME IN MINUTES:',
+ if options.verbose: print (time.time() - start_time) / 60.0
+ sys.exit(0)
+ except KeyboardInterrupt, e: # Ctrl-C
+ raise e
+ except SystemExit, e: # sys.exit()
+ raise e
+ except Exception, e:
+ print 'ERROR, UNEXPECTED EXCEPTION'
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
Propchange: lldb/trunk/test/pexpect-2.4/examples/hive.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/monitor.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/monitor.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/monitor.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/monitor.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,208 @@
+#!/usr/bin/env python
+
+""" This runs a sequence of commands on a remote host using SSH. It runs a
+simple system checks such as uptime and free to monitor the state of the remote
+host.
+
+./monitor.py [-s server_hostname] [-u username] [-p password]
+ -s : hostname of the remote server to login to.
+ -u : username to user for login.
+ -p : Password to user for login.
+
+Example:
+ This will print information about the given host:
+ ./monitor.py -s www.example.com -u mylogin -p mypassword
+
+It works like this:
+ Login via SSH (This is the hardest part).
+ Run and parse 'uptime'.
+ Run 'iostat'.
+ Run 'vmstat'.
+ Run 'netstat'
+ Run 'free'.
+ Exit the remote host.
+"""
+
+import os, sys, time, re, getopt, getpass
+import traceback
+import pexpect
+
+#
+# Some constants.
+#
+COMMAND_PROMPT = '[#$] ' ### This is way too simple for industrial use -- we will change is ASAP.
+TERMINAL_PROMPT = '(?i)terminal type\?'
+TERMINAL_TYPE = 'vt100'
+# This is the prompt we get if SSH does not have the remote host's public key stored in the cache.
+SSH_NEWKEY = '(?i)are you sure you want to continue connecting'
+
+def exit_with_usage():
+
+ print globals()['__doc__']
+ os._exit(1)
+
+def main():
+
+ global COMMAND_PROMPT, TERMINAL_PROMPT, TERMINAL_TYPE, SSH_NEWKEY
+ ######################################################################
+ ## Parse the options, arguments, get ready, etc.
+ ######################################################################
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?s:u:p:', ['help','h','?'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+ options = dict(optlist)
+ if len(args) > 1:
+ exit_with_usage()
+
+ if [elem for elem in options if elem in ['-h','--h','-?','--?','--help']]:
+ print "Help:"
+ exit_with_usage()
+
+ if '-s' in options:
+ host = options['-s']
+ else:
+ host = raw_input('hostname: ')
+ if '-u' in options:
+ user = options['-u']
+ else:
+ user = raw_input('username: ')
+ if '-p' in options:
+ password = options['-p']
+ else:
+ password = getpass.getpass('password: ')
+
+ #
+ # Login via SSH
+ #
+ child = pexpect.spawn('ssh -l %s %s'%(user, host))
+ i = child.expect([pexpect.TIMEOUT, SSH_NEWKEY, COMMAND_PROMPT, '(?i)password'])
+ if i == 0: # Timeout
+ print 'ERROR! could not login with SSH. Here is what SSH said:'
+ print child.before, child.after
+ print str(child)
+ sys.exit (1)
+ if i == 1: # In this case SSH does not have the public key cached.
+ child.sendline ('yes')
+ child.expect ('(?i)password')
+ if i == 2:
+ # This may happen if a public key was setup to automatically login.
+ # But beware, the COMMAND_PROMPT at this point is very trivial and
+ # could be fooled by some output in the MOTD or login message.
+ pass
+ if i == 3:
+ child.sendline(password)
+ # Now we are either at the command prompt or
+ # the login process is asking for our terminal type.
+ i = child.expect ([COMMAND_PROMPT, TERMINAL_PROMPT])
+ if i == 1:
+ child.sendline (TERMINAL_TYPE)
+ child.expect (COMMAND_PROMPT)
+ #
+ # Set command prompt to something more unique.
+ #
+ COMMAND_PROMPT = "\[PEXPECT\]\$ "
+ child.sendline ("PS1='[PEXPECT]\$ '") # In case of sh-style
+ i = child.expect ([pexpect.TIMEOUT, COMMAND_PROMPT], timeout=10)
+ if i == 0:
+ print "# Couldn't set sh-style prompt -- trying csh-style."
+ child.sendline ("set prompt='[PEXPECT]\$ '")
+ i = child.expect ([pexpect.TIMEOUT, COMMAND_PROMPT], timeout=10)
+ if i == 0:
+ print "Failed to set command prompt using sh or csh style."
+ print "Response was:"
+ print child.before
+ sys.exit (1)
+
+ # Now we should be at the command prompt and ready to run some commands.
+ print '---------------------------------------'
+ print 'Report of commands run on remote host.'
+ print '---------------------------------------'
+
+ # Run uname.
+ child.sendline ('uname -a')
+ child.expect (COMMAND_PROMPT)
+ print child.before
+ if 'linux' in child.before.lower():
+ LINUX_MODE = 1
+ else:
+ LINUX_MODE = 0
+
+ # Run and parse 'uptime'.
+ child.sendline ('uptime')
+ child.expect('up\s+(.*?),\s+([0-9]+) users?,\s+load averages?: ([0-9]+\.[0-9][0-9]),?\s+([0-9]+\.[0-9][0-9]),?\s+([0-9]+\.[0-9][0-9])')
+ duration, users, av1, av5, av15 = child.match.groups()
+ days = '0'
+ hours = '0'
+ mins = '0'
+ if 'day' in duration:
+ child.match = re.search('([0-9]+)\s+day',duration)
+ days = str(int(child.match.group(1)))
+ if ':' in duration:
+ child.match = re.search('([0-9]+):([0-9]+)',duration)
+ hours = str(int(child.match.group(1)))
+ mins = str(int(child.match.group(2)))
+ if 'min' in duration:
+ child.match = re.search('([0-9]+)\s+min',duration)
+ mins = str(int(child.match.group(1)))
+ print
+ print 'Uptime: %s days, %s users, %s (1 min), %s (5 min), %s (15 min)' % (
+ duration, users, av1, av5, av15)
+ child.expect (COMMAND_PROMPT)
+
+ # Run iostat.
+ child.sendline ('iostat')
+ child.expect (COMMAND_PROMPT)
+ print child.before
+
+ # Run vmstat.
+ child.sendline ('vmstat')
+ child.expect (COMMAND_PROMPT)
+ print child.before
+
+ # Run free.
+ if LINUX_MODE:
+ child.sendline ('free') # Linux systems only.
+ child.expect (COMMAND_PROMPT)
+ print child.before
+
+ # Run df.
+ child.sendline ('df')
+ child.expect (COMMAND_PROMPT)
+ print child.before
+
+ # Run lsof.
+ child.sendline ('lsof')
+ child.expect (COMMAND_PROMPT)
+ print child.before
+
+# # Run netstat
+# child.sendline ('netstat')
+# child.expect (COMMAND_PROMPT)
+# print child.before
+
+# # Run MySQL show status.
+# child.sendline ('mysql -p -e "SHOW STATUS;"')
+# child.expect (PASSWORD_PROMPT_MYSQL)
+# child.sendline (password_mysql)
+# child.expect (COMMAND_PROMPT)
+# print
+# print child.before
+
+ # Now exit the remote host.
+ child.sendline ('exit')
+ index = child.expect([pexpect.EOF, "(?i)there are stopped jobs"])
+ if index==1:
+ child.sendline("exit")
+ child.expect(EOF)
+
+if __name__ == "__main__":
+
+ try:
+ main()
+ except Exception, e:
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/monitor.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/passmass.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/passmass.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/passmass.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/passmass.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,90 @@
+#!/usr/bin/env python
+
+"""Change passwords on the named machines. passmass host1 host2 host3 . . .
+Note that login shell prompt on remote machine must end in # or $. """
+
+import pexpect
+import sys, getpass
+
+USAGE = '''passmass host1 host2 host3 . . .'''
+COMMAND_PROMPT = '[$#] '
+TERMINAL_PROMPT = r'Terminal type\?'
+TERMINAL_TYPE = 'vt100'
+SSH_NEWKEY = r'Are you sure you want to continue connecting \(yes/no\)\?'
+
+def login(host, user, password):
+
+ child = pexpect.spawn('ssh -l %s %s'%(user, host))
+ fout = file ("LOG.TXT","wb")
+ child.setlog (fout)
+
+ i = child.expect([pexpect.TIMEOUT, SSH_NEWKEY, '[Pp]assword: '])
+ if i == 0: # Timeout
+ print 'ERROR!'
+ print 'SSH could not login. Here is what SSH said:'
+ print child.before, child.after
+ sys.exit (1)
+ if i == 1: # SSH does not have the public key. Just accept it.
+ child.sendline ('yes')
+ child.expect ('[Pp]assword: ')
+ child.sendline(password)
+ # Now we are either at the command prompt or
+ # the login process is asking for our terminal type.
+ i = child.expect (['Permission denied', TERMINAL_PROMPT, COMMAND_PROMPT])
+ if i == 0:
+ print 'Permission denied on host:', host
+ sys.exit (1)
+ if i == 1:
+ child.sendline (TERMINAL_TYPE)
+ child.expect (COMMAND_PROMPT)
+ return child
+
+# (current) UNIX password:
+def change_password(child, user, oldpassword, newpassword):
+
+ child.sendline('passwd')
+ i = child.expect(['[Oo]ld [Pp]assword', '.current.*password', '[Nn]ew [Pp]assword'])
+ # Root does not require old password, so it gets to bypass the next step.
+ if i == 0 or i == 1:
+ child.sendline(oldpassword)
+ child.expect('[Nn]ew [Pp]assword')
+ child.sendline(newpassword)
+ i = child.expect(['[Nn]ew [Pp]assword', '[Rr]etype', '[Rr]e-enter'])
+ if i == 0:
+ print 'Host did not like new password. Here is what it said...'
+ print child.before
+ child.send (chr(3)) # Ctrl-C
+ child.sendline('') # This should tell remote passwd command to quit.
+ return
+ child.sendline(newpassword)
+
+def main():
+
+ if len(sys.argv) <= 1:
+ print USAGE
+ return 1
+
+ user = raw_input('Username: ')
+ password = getpass.getpass('Current Password: ')
+ newpassword = getpass.getpass('New Password: ')
+ newpasswordconfirm = getpass.getpass('Confirm New Password: ')
+ if newpassword != newpasswordconfirm:
+ print 'New Passwords do not match.'
+ return 1
+
+ for host in sys.argv[1:]:
+ child = login(host, user, password)
+ if child == None:
+ print 'Could not login to host:', host
+ continue
+ print 'Changing password on host:', host
+ change_password(child, user, password, newpassword)
+ child.expect(COMMAND_PROMPT)
+ child.sendline('exit')
+
+if __name__ == '__main__':
+ try:
+ main()
+ except pexpect.ExceptionPexpect, e:
+ print str(e)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/passmass.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/python.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/python.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/python.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/python.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,22 @@
+#!/usr/bin/env python
+
+"""This starts the python interpreter; captures the startup message; then gives
+the user interactive control over the session. Why? For fun... """
+
+# Don't do this unless you like being John Malkovich
+# c = pexpect.spawn ('/usr/bin/env python ./python.py')
+
+import pexpect
+c = pexpect.spawn ('/usr/bin/env python')
+c.expect ('>>>')
+print 'And now for something completely different...'
+f = lambda s:s and f(s[1:])+s[0] # Makes a function to reverse a string.
+print f(c.before)
+print 'Yes, it\'s python, but it\'s backwards.'
+print
+print 'Escape character is \'^]\'.'
+print c.after,
+c.interact()
+c.kill(1)
+print 'is alive:', c.isalive()
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/python.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/rippy.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/rippy.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/rippy.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/rippy.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,993 @@
+#!/usr/bin/env python
+
+"""Rippy!
+
+This script helps to convert video from one format to another.
+This is useful for ripping DVD to mpeg4 video (XviD, DivX).
+
+Features:
+ * automatic crop detection
+ * mp3 audio compression with resampling options
+ * automatic bitrate calculation based on desired target size
+ * optional interlace removal, b/w video optimization, video scaling
+
+Run the script with no arguments to start with interactive prompts:
+ rippy.py
+Run the script with the filename of a config to start automatic mode:
+ rippy.py rippy.conf
+
+After Rippy is finished it saves the current configuation in a file called
+'rippy.conf' in the local directoy. This can be used to rerun process using the
+exact same settings by passing the filename of the conf file as an argument to
+Rippy. Rippy will read the options from the file instead of asking you for
+options interactively. So if you run rippy with 'dry_run=1' then you can run
+the process again later using the 'rippy.conf' file. Don't forget to edit
+'rippy.conf' to set 'dry_run=0'!
+
+If you run rippy with 'dry_run' and 'verbose' true then the output generated is
+valid command line commands. you could (in theory) cut-and-paste the commands
+to a shell prompt. You will need to tweak some values such as crop area and bit
+rate because these cannot be calculated in a dry run. This is useful if you
+want to get an idea of what Rippy plans to do.
+
+For all the trouble that Rippy goes through to calculate the best bitrate for a
+desired target video size it sometimes fails to get it right. Sometimes the
+final video size will differ more than you wanted from the desired size, but if
+you are really motivated and have a lot of time on your hands then you can run
+Rippy again with a manually calculated bitrate. After all compression is done
+the first time Rippy will recalculate the bitrate to give you the nearly exact
+bitrate that would have worked. You can then edit the 'rippy.conf' file; set
+the video_bitrate with this revised bitrate; and then run Rippy all over again.
+There is nothing like 4-pass video compression to get it right! Actually, this
+could be done in three passes since I don't need to do the second pass
+compression before I calculate the revised bitrate. I'm also considering an
+enhancement where Rippy would compress ten spread out chunks, 1-minute in
+length to estimate the bitrate.
+
+Free, open source, and all that good stuff.
+Rippy Copyright (c) 2006 Noah Spurrier
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Noah Spurrier
+$Id: rippy.py 517 2008-08-18 22:23:56Z noah $
+"""
+
+import sys, os, re, math, stat, getopt, traceback, types, time
+import pexpect
+
+__version__ = '1.2'
+__revision__ = '$Revision: 11 $'
+__all__ = ['main', __version__, __revision__]
+
+GLOBAL_LOGFILE_NAME = "rippy_%d.log" % os.getpid()
+GLOBAL_LOGFILE = open (GLOBAL_LOGFILE_NAME, "wb")
+
+###############################################################################
+# This giant section defines the prompts and defaults used in interactive mode.
+###############################################################################
+# Python dictionaries are unordered, so
+# I have this list that maintains the order of the keys.
+prompts_key_order = (
+'verbose_flag',
+'dry_run_flag',
+'video_source_filename',
+'video_chapter',
+'video_final_filename',
+'video_length',
+'video_aspect_ratio',
+'video_scale',
+'video_encode_passes',
+'video_codec',
+'video_fourcc_override',
+'video_bitrate',
+'video_bitrate_overhead',
+'video_target_size',
+'video_deinterlace_flag',
+'video_crop_area',
+'video_gray_flag',
+'subtitle_id',
+'audio_id',
+'audio_codec',
+'audio_raw_filename',
+'audio_volume_boost',
+'audio_sample_rate',
+'audio_bitrate',
+#'audio_lowpass_filter',
+'delete_tmp_files_flag'
+)
+#
+# The 'prompts' dictionary holds all the messages shown to the user in
+# interactive mode. The 'prompts' dictionary schema is defined as follows:
+# prompt_key : ( default value, prompt string, help string, level of difficulty (0,1,2) )
+#
+prompts = {
+'video_source_filename':("dvd://1", 'video source filename?', """This is the filename of the video that you want to convert from.
+It can be any file that mencoder supports.
+You can also choose a DVD device using the dvd://1 syntax.
+Title 1 is usually the main title on a DVD.""",0),
+'video_chapter':("none",'video chapter?',"""This is the chapter number. Usually disks such as TV series seasons will be divided into chapters. Maybe be set to none.""",0),
+'video_final_filename':("video_final.avi", "video final filename?", """This is the name of the final video.""",0),
+'audio_raw_filename':("audiodump.wav", "audio raw filename?", """This is the audio raw PCM filename. This is prior to compression.
+Note that mplayer automatically names this audiodump.wav, so don't change this.""",1000),
+#'audio_compressed_filename':("audiodump.mp3","Audio compressed filename?", """This is the name of the compressed audio that will be mixed
+#into the final video. Normally you don't need to change this.""",2),
+'video_length':("none","video length in seconds?","""This sets the length of the video in seconds. This is used to estimate the
+bitrate for a target video file size. Set to 'calc' to have Rippy calculate
+the length. Set to 'none' if you don't want rippy to estimate the bitrate --
+you will have to manually specify bitrate.""",1),
+'video_aspect_ratio':("calc","aspect ratio?","""This sets the aspect ratio of the video. Most DVDs are 16/9 or 4/3.""",1),
+'video_scale':("none","video scale?","""This scales the video to the given output size. The default is to do no scaling.
+You may type in a resolution such as 320x240 or you may use presets.
+ qntsc: 352x240 (NTSC quarter screen)
+ qpal: 352x288 (PAL quarter screen)
+ ntsc: 720x480 (standard NTSC)
+ pal: 720x576 (standard PAL)
+ sntsc: 640x480 (square pixel NTSC)
+ spal: 768x576 (square pixel PAL)""",1),
+'video_codec':("mpeg4","video codec?","""This is the video compression to use. This is passed directly to mencoder, so
+any format that it recognizes should work. For XviD or DivX use mpeg4.
+Almost all MS Windows systems support wmv2 out of the box.
+Some common codecs include:
+mjpeg, h263, h263p, h264, mpeg4, msmpeg4, wmv1, wmv2, mpeg1video, mpeg2video, huffyuv, ffv1.
+""",2),
+'audio_codec':("mp3","audio codec?","""This is the audio compression to use. This is passed directly to mencoder, so
+any format that it recognizes will work.
+Some common codecs include:
+mp3, mp2, aac, pcm
+See mencoder manual for details.""",2),
+'video_fourcc_override':("XVID","force fourcc code?","""This forces the fourcc codec to the given value. XVID is safest for Windows.
+The following are common fourcc values:
+ FMP4 - This is the mencoder default. This is the "real" value.
+ XVID - used by Xvid (safest)
+ DX50 -
+ MP4S - Microsoft""",2),
+'video_encode_passes':("1","number of encode passes?","""This sets how many passes to use to encode the video. You can choose 1 or 2.
+Using two pases takes twice as long as one pass, but produces a better
+quality video. I found that the improvement is not that impressive.""",1),
+'verbose_flag':("Y","verbose output?","""This sets verbose output. If true then all commands and arguments are printed
+before they are run. This is useful to see exactly how commands are run.""",1),
+'dry_run_flag':("N","dry run?","""This sets 'dry run' mode. If true then commands are not run. This is useful
+if you want to see what would the script would do.""",1),
+'video_bitrate':("calc","video bitrate?","""This sets the video bitrate. This overrides video_target_size.
+Set to 'calc' to automatically estimate the bitrate based on the
+video final target size. If you set video_length to 'none' then
+you will have to specify this video_bitrate.""",1),
+'video_target_size':("737280000","video final target size?","""This sets the target video size that you want to end up with.
+This is over-ridden by video_bitrate. In other words, if you specify
+video_bitrate then video_target_size is ignored.
+Due to the unpredictable nature of VBR compression the final video size
+may not exactly match. The following are common CDR sizes:
+ 180MB CDR (21 minutes) holds 193536000 bytes
+ 550MB CDR (63 minutes) holds 580608000 bytes
+ 650MB CDR (74 minutes) holds 681984000 bytes
+ 700MB CDR (80 minutes) holds 737280000 bytes""",0),
+'video_bitrate_overhead':("1.0","bitrate overhead factor?","""Adjust this value if you want to leave more room for
+other files such as subtitle files.
+If you specify video_bitrate then this value is ignored.""",2),
+'video_crop_area':("detect","crop area?","""This sets the crop area to remove black bars from the top or sides of the video.
+This helps save space. Set to 'detect' to automatically detect the crop area.
+Set to 'none' to not crop the video. Normally you don't need to change this.""",1),
+'video_deinterlace_flag':("N","is the video interlaced?","""This sets the deinterlace flag. If set then mencoder will be instructed
+to filter out interlace artifacts (using '-vf pp=md').""",1),
+'video_gray_flag':("N","is the video black and white (gray)?","""This improves output for black and white video.""",1),
+'subtitle_id':("None","Subtitle ID stream?","""This selects the subtitle stream to extract from the source video.
+Normally, 0 is the English subtitle stream for a DVD.
+Subtitles IDs with higher numbers may be other languages.""",1),
+'audio_id':("128","audio ID stream?","""This selects the audio stream to extract from the source video.
+If your source is a VOB file (DVD) then stream IDs start at 128.
+Normally, 128 is the main audio track for a DVD.
+Tracks with higher numbers may be other language dubs or audio commentary.""",1),
+'audio_sample_rate':("32000","audio sample rate (Hz) 48000, 44100, 32000, 24000, 12000","""This sets the rate at which the compressed audio will be resampled.
+DVD audio is 48 kHz whereas music CDs use 44.1 kHz. The higher the sample rate
+the more space the audio track will take. That will leave less space for video.
+32 kHz is a good trade-off if you are trying to fit a video onto a CD.""",1),
+'audio_bitrate':("96","audio bitrate (kbit/s) 192, 128, 96, 64?","""This sets the bitrate for MP3 audio compression.
+The higher the bitrate the more space the audio track will take.
+That will leave less space for video. Most people find music to be acceptable
+at 128 kBitS. 96 kBitS is a good trade-off if you are trying to fit a video onto a CD.""",1),
+'audio_volume_boost':("none","volume dB boost?","""Many DVDs have very low audio volume. This sets an audio volume boost in Decibels.
+Values of 6 to 10 usually adjust quiet DVDs to a comfortable level.""",1),
+#'audio_lowpass_filter':("16","audio lowpass filter (kHz)?","""This sets the low-pass filter for the audio.
+#Normally this should be half of the audio sample rate.
+#This improves audio compression and quality.
+#Normally you don't need to change this.""",1),
+'delete_tmp_files_flag':("N","delete temporary files when finished?","""If Y then %s, audio_raw_filename, and 'divx2pass.log' will be deleted at the end."""%GLOBAL_LOGFILE_NAME,1)
+}
+
+##############################################################################
+# This is the important convert control function
+##############################################################################
+def convert (options):
+ """This is the heart of it all -- this performs an end-to-end conversion of
+ a video from one format to another. It requires a dictionary of options.
+ The conversion process will also add some keys to the dictionary
+ such as length of the video and crop area. The dictionary is returned.
+ This options dictionary could be used again to repeat the convert process
+ (it is also saved to rippy.conf as text).
+ """
+ if options['subtitle_id'] is not None:
+ print "# extract subtitles"
+ apply_smart (extract_subtitles, options)
+ else:
+ print "# do not extract subtitles."
+
+ # Optimization
+ # I really only need to calculate the exact video length if the user
+ # selected 'calc' for video_bitrate
+ # or
+ # selected 'detect' for video_crop_area.
+ if options['video_bitrate']=='calc' or options['video_crop_area']=='detect':
+ # As strange as it seems, the only reliable way to calculate the length
+ # of a video (in seconds) is to extract the raw, uncompressed PCM audio stream
+ # and then calculate the length of that. This is because MP4 video is VBR, so
+ # you cannot get exact time based on compressed size.
+ if options['video_length']=='calc':
+ print "# extract PCM raw audio to %s" % (options['audio_raw_filename'])
+ apply_smart (extract_audio, options)
+ options['video_length'] = apply_smart (get_length, options)
+ print "# Length of raw audio file : %d seconds (%0.2f minutes)" % (options['video_length'], float(options['video_length'])/60.0)
+ if options['video_bitrate']=='calc':
+ options['video_bitrate'] = options['video_bitrate_overhead'] * apply_smart (calc_video_bitrate, options)
+ print "# video bitrate : " + str(options['video_bitrate'])
+ if options['video_crop_area']=='detect':
+ options['video_crop_area'] = apply_smart (crop_detect, options)
+ print "# crop area : " + str(options['video_crop_area'])
+ print "# compression estimate"
+ print apply_smart (compression_estimate, options)
+
+ print "# compress video"
+ apply_smart (compress_video, options)
+ 'audio_volume_boost',
+
+ print "# delete temporary files:",
+ if options['delete_tmp_files_flag']:
+ print "yes"
+ apply_smart (delete_tmp_files, options)
+ else:
+ print "no"
+
+ # Finish by saving options to rippy.conf and
+ # calclating if final_size is less than target_size.
+ o = ["# options used to create video\n"]
+ video_actual_size = get_filesize (options['video_final_filename'])
+ if options['video_target_size'] != 'none':
+ revised_bitrate = calculate_revised_bitrate (options['video_bitrate'], options['video_target_size'], video_actual_size)
+ o.append("# revised video_bitrate : %d\n" % revised_bitrate)
+ for k,v in options.iteritems():
+ o.append (" %30s : %s\n" % (k, v))
+ print '# '.join(o)
+ fout = open("rippy.conf","wb").write(''.join(o))
+ print "# final actual video size = %d" % video_actual_size
+ if options['video_target_size'] != 'none':
+ if video_actual_size > options['video_target_size']:
+ print "# FINAL VIDEO SIZE IS GREATER THAN DESIRED TARGET"
+ print "# final video size is %d bytes over target size" % (video_actual_size - options['video_target_size'])
+ else:
+ print "# final video size is %d bytes under target size" % (options['video_target_size'] - video_actual_size)
+ print "# If you want to run the entire compression process all over again"
+ print "# to get closer to the target video size then trying using a revised"
+ print "# video_bitrate of %d" % revised_bitrate
+
+ return options
+
+##############################################################################
+
+def exit_with_usage(exit_code=1):
+ print globals()['__doc__']
+ print 'version:', globals()['__version__']
+ sys.stdout.flush()
+ os._exit(exit_code)
+
+def check_missing_requirements ():
+ """This list of missing requirements (mencoder, mplayer, lame, and mkvmerge).
+ Returns None if all requirements are in the execution path.
+ """
+ missing = []
+ if pexpect.which("mencoder") is None:
+ missing.append("mencoder")
+ if pexpect.which("mplayer") is None:
+ missing.append("mplayer")
+ cmd = "mencoder -oac help"
+ (command_output, exitstatus) = run(cmd)
+ ar = re.findall("(mp3lame)", command_output)
+ if len(ar)==0:
+ missing.append("Mencoder was not compiled with mp3lame support.")
+
+ #if pexpect.which("lame") is None:
+ # missing.append("lame")
+ #if pexpect.which("mkvmerge") is None:
+ # missing.append("mkvmerge")
+ if len(missing)==0:
+ return None
+ return missing
+
+def input_option (message, default_value="", help=None, level=0, max_level=0):
+ """This is a fancy raw_input function.
+ If the user enters '?' then the contents of help is printed.
+
+ The 'level' and 'max_level' are used to adjust which advanced options
+ are printed. 'max_level' is the level of options that the user wants
+ to see. 'level' is the level of difficulty for this particular option.
+ If this level is <= the max_level the user wants then the
+ message is printed and user input is allowed; otherwise, the
+ default value is returned automatically without user input.
+ """
+ if default_value != '':
+ message = "%s [%s] " % (message, default_value)
+ if level > max_level:
+ return default_value
+ while 1:
+ user_input = raw_input (message)
+ if user_input=='?':
+ print help
+ elif user_input=='':
+ return default_value
+ else:
+ break
+ return user_input
+
+def progress_callback (d=None):
+ """This callback simply prints a dot to show activity.
+ This is used when running external commands with pexpect.run.
+ """
+ sys.stdout.write (".")
+ sys.stdout.flush()
+
+def run(cmd):
+ global GLOBAL_LOGFILE
+ print >>GLOBAL_LOGFILE, cmd
+ (command_output, exitstatus) = pexpect.run(cmd, events={pexpect.TIMEOUT:progress_callback}, timeout=5, withexitstatus=True, logfile=GLOBAL_LOGFILE)
+ if exitstatus != 0:
+ print "RUN FAILED. RETURNED EXIT STATUS:", exitstatus
+ print >>GLOBAL_LOGFILE, "RUN FAILED. RETURNED EXIT STATUS:", exitstatus
+ return (command_output, exitstatus)
+
+def apply_smart (func, args):
+ """This is similar to func(**args), but this won't complain about
+ extra keys in 'args'. This ignores keys in 'args' that are
+ not required by 'func'. This passes None to arguments that are
+ not defined in 'args'. That's fine for arguments with a default valeue, but
+ that's a bug for required arguments. I should probably raise a TypeError.
+ The func parameter can be a function reference or a string.
+ If it is a string then it is converted to a function reference.
+ """
+ if type(func) is type(''):
+ if func in globals():
+ func = globals()[func]
+ else:
+ raise NameError("name '%s' is not defined" % func)
+ if hasattr(func,'im_func'): # Handle case when func is a class method.
+ func = func.im_func
+ argcount = func.func_code.co_argcount
+ required_args = dict([(k,args.get(k)) for k in func.func_code.co_varnames[:argcount]])
+ return func(**required_args)
+
+def count_unique (items):
+ """This takes a list and returns a sorted list of tuples with a count of each unique item in the list.
+ Example 1:
+ count_unique(['a','b','c','a','c','c','a','c','c'])
+ returns:
+ [(5,'c'), (3,'a'), (1,'b')]
+ Example 2 -- get the most frequent item in a list:
+ count_unique(['a','b','c','a','c','c','a','c','c'])[0][1]
+ returns:
+ 'c'
+ """
+ stats = {}
+ for i in items:
+ if i in stats:
+ stats[i] = stats[i] + 1
+ else:
+ stats[i] = 1
+ stats = [(v, k) for k, v in stats.items()]
+ stats.sort()
+ stats.reverse()
+ return stats
+
+def calculate_revised_bitrate (video_bitrate, video_target_size, video_actual_size):
+ """This calculates a revised video bitrate given the video_bitrate used,
+ the actual size that resulted, and the video_target_size.
+ This can be used if you want to compress the video all over again in an
+ attempt to get closer to the video_target_size.
+ """
+ return int(math.floor(video_bitrate * (float(video_target_size) / float(video_actual_size))))
+
+def get_aspect_ratio (video_source_filename):
+ """This returns the aspect ratio of the original video.
+ This is usualy 1.78:1(16/9) or 1.33:1(4/3).
+ This function is very lenient. It basically guesses 16/9 whenever
+ it cannot figure out the aspect ratio.
+ """
+ cmd = "mplayer '%s' -vo png -ao null -frames 1" % video_source_filename
+ (command_output, exitstatus) = run(cmd)
+ ar = re.findall("Movie-Aspect is ([0-9]+\.?[0-9]*:[0-9]+\.?[0-9]*)", command_output)
+ if len(ar)==0:
+ return '16/9'
+ if ar[0] == '1.78:1':
+ return '16/9'
+ if ar[0] == '1.33:1':
+ return '4/3'
+ return '16/9'
+ #idh = re.findall("ID_VIDEO_HEIGHT=([0-9]+)", command_output)
+ #if len(idw)==0 or len(idh)==0:
+ # print 'WARNING!'
+ # print 'Could not get aspect ration. Assuming 1.78:1 (16/9).'
+ # return 1.78
+ #return float(idw[0])/float(idh[0])
+#ID_VIDEO_WIDTH=720
+#ID_VIDEO_HEIGHT=480
+#Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
+
+
+def get_aid_list (video_source_filename):
+ """This returns a list of audio ids in the source video file.
+ TODO: Also extract ID_AID_nnn_LANG to associate language. Not all DVDs include this.
+ """
+ cmd = "mplayer '%s' -vo null -ao null -frames 0 -identify" % video_source_filename
+ (command_output, exitstatus) = run(cmd)
+ idl = re.findall("ID_AUDIO_ID=([0-9]+)", command_output)
+ idl.sort()
+ return idl
+
+def get_sid_list (video_source_filename):
+ """This returns a list of subtitle ids in the source video file.
+ TODO: Also extract ID_SID_nnn_LANG to associate language. Not all DVDs include this.
+ """
+ cmd = "mplayer '%s' -vo null -ao null -frames 0 -identify" % video_source_filename
+ (command_output, exitstatus) = run(cmd)
+ idl = re.findall("ID_SUBTITLE_ID=([0-9]+)", command_output)
+ idl.sort()
+ return idl
+
+def extract_audio (video_source_filename, audio_id=128, verbose_flag=0, dry_run_flag=0):
+ """This extracts the given audio_id track as raw uncompressed PCM from the given source video.
+ Note that mplayer always saves this to audiodump.wav.
+ At this time there is no way to set the output audio name.
+ """
+ #cmd = "mplayer %(video_source_filename)s -vc null -vo null -aid %(audio_id)s -ao pcm:fast -noframedrop" % locals()
+ cmd = "mplayer -quiet '%(video_source_filename)s' -vc dummy -vo null -aid %(audio_id)s -ao pcm:fast -noframedrop" % locals()
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+
+def extract_subtitles (video_source_filename, subtitle_id=0, verbose_flag=0, dry_run_flag=0):
+ """This extracts the given subtitle_id track as VOBSUB format from the given source video.
+ """
+ cmd = "mencoder -quiet '%(video_source_filename)s' -o /dev/null -nosound -ovc copy -vobsubout subtitles -vobsuboutindex 0 -sid %(subtitle_id)s" % locals()
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+
+def get_length (audio_raw_filename):
+ """This attempts to get the length of the media file (length is time in seconds).
+ This should not be confused with size (in bytes) of the file data.
+ This is best used on a raw PCM AUDIO file because mplayer cannot get an accurate
+ time for many compressed video and audio formats -- notably MPEG4 and MP3.
+ Weird...
+ This returns -1 if it cannot get the length of the given file.
+ """
+ cmd = "mplayer %s -vo null -ao null -frames 0 -identify" % audio_raw_filename
+ (command_output, exitstatus) = run(cmd)
+ idl = re.findall("ID_LENGTH=([0-9.]*)", command_output)
+ idl.sort()
+ if len(idl) != 1:
+ print "ERROR: cannot get length of raw audio file."
+ print "command_output of mplayer identify:"
+ print command_output
+ print "parsed command_output:"
+ print str(idl)
+ return -1
+ return float(idl[0])
+
+def get_filesize (filename):
+ """This returns the number of bytes a file takes on storage."""
+ return os.stat(filename)[stat.ST_SIZE]
+
+def calc_video_bitrate (video_target_size, audio_bitrate, video_length, extra_space=0, dry_run_flag=0):
+ """This gives an estimate of the video bitrate necessary to
+ fit the final target size. This will take into account room to
+ fit the audio and extra space if given (for container overhead or whatnot).
+ video_target_size is in bytes,
+ audio_bitrate is bits per second (96, 128, 256, etc.) ASSUMING CBR,
+ video_length is in seconds,
+ extra_space is in bytes.
+ a 180MB CDR (21 minutes) holds 193536000 bytes.
+ a 550MB CDR (63 minutes) holds 580608000 bytes.
+ a 650MB CDR (74 minutes) holds 681984000 bytes.
+ a 700MB CDR (80 minutes) holds 737280000 bytes.
+ """
+ if dry_run_flag:
+ return -1
+ if extra_space is None: extra_space = 0
+ #audio_size = os.stat(audio_compressed_filename)[stat.ST_SIZE]
+ audio_size = (audio_bitrate * video_length * 1000) / 8.0
+ video_target_size = video_target_size - audio_size - extra_space
+ return (int)(calc_video_kbitrate (video_target_size, video_length))
+
+def calc_video_kbitrate (target_size, length_secs):
+ """Given a target byte size free for video data, this returns the bitrate in kBit/S.
+ For mencoder vbitrate 1 kBit = 1000 Bits -- not 1024 bits.
+ target_size = bitrate * 1000 * length_secs / 8
+ target_size = bitrate * 125 * length_secs
+ bitrate = target_size/(125*length_secs)
+ """
+ return int(target_size / (125.0 * length_secs))
+
+def crop_detect (video_source_filename, video_length, dry_run_flag=0):
+ """This attempts to figure out the best crop for the given video file.
+ Basically it runs crop detect for 10 seconds on five different places in the video.
+ It picks the crop area that was most often detected.
+ """
+ skip = int(video_length/9) # offset to skip (-ss option in mencoder)
+ sample_length = 10
+ cmd1 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, skip, sample_length)
+ cmd2 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 2*skip, sample_length)
+ cmd3 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 4*skip, sample_length)
+ cmd4 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 6*skip, sample_length)
+ cmd5 = "mencoder '%s' -quiet -ss %d -endpos %d -o /dev/null -nosound -ovc lavc -vf cropdetect" % (video_source_filename, 8*skip, sample_length)
+ if dry_run_flag:
+ return "0:0:0:0"
+ (command_output1, exitstatus1) = run(cmd1)
+ (command_output2, exitstatus2) = run(cmd2)
+ (command_output3, exitstatus3) = run(cmd3)
+ (command_output4, exitstatus4) = run(cmd4)
+ (command_output5, exitstatus5) = run(cmd5)
+ idl = re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output1)
+ idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output2)
+ idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output3)
+ idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output4)
+ idl = idl + re.findall("-vf crop=([0-9]+:[0-9]+:[0-9]+:[0-9]+)", command_output5)
+ items_count = count_unique(idl)
+ return items_count[0][1]
+
+
+def build_compression_command (video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None, seek_skip=None, seek_length=None, video_chapter=None):
+#Notes:For DVD, VCD, and SVCD use acodec=mp2 and vcodec=mpeg2video:
+#mencoder movie.avi -o movie.VOB -ovc lavc -oac lavc -lavcopts acodec=mp2:abitrate=224:vcodec=mpeg2video:vbitrate=2000
+
+ #
+ # build video filter (-vf) argument
+ #
+ video_filter = ''
+ if video_crop_area and video_crop_area.lower()!='none':
+ video_filter = video_filter + 'crop=%s' % video_crop_area
+ if video_deinterlace_flag:
+ if video_filter != '':
+ video_filter = video_filter + ','
+ video_filter = video_filter + 'pp=md'
+ if video_scale and video_scale.lower()!='none':
+ if video_filter != '':
+ video_filter = video_filter + ','
+ video_filter = video_filter + 'scale=%s' % video_scale
+ # optional video rotation -- were you holding your camera sideways?
+ #if video_filter != '':
+ # video_filter = video_filter + ','
+ #video_filter = video_filter + 'rotate=2'
+ if video_filter != '':
+ video_filter = '-vf ' + video_filter
+
+ #
+ # build chapter argument
+ #
+ if video_chapter is not None:
+ chapter = '-chapter %d-%d' %(video_chapter,video_chapter)
+ else:
+ chapter = ''
+# chapter = '-chapter 2-2'
+
+ #
+ # build audio_filter argument
+ #
+ audio_filter = ''
+ if audio_sample_rate:
+ if audio_filter != '':
+ audio_filter = audio_filter + ','
+ audio_filter = audio_filter + 'lavcresample=%s' % audio_sample_rate
+ if audio_volume_boost is not None:
+ if audio_filter != '':
+ audio_filter = audio_filter + ','
+ audio_filter = audio_filter + 'volume=%0.1f:1'%audio_volume_boost
+ if audio_filter != '':
+ audio_filter = '-af ' + audio_filter
+ #
+ #if audio_sample_rate:
+ # audio_filter = ('-srate %d ' % audio_sample_rate) + audio_filter
+
+ #
+ # build lavcopts argument
+ #
+ #lavcopts = '-lavcopts vcodec=%s:vbitrate=%d:mbd=2:aspect=%s:acodec=%s:abitrate=%d:vpass=1' % (video_codec,video_bitrate,audio_codec,audio_bitrate)
+ lavcopts = '-lavcopts vcodec=%(video_codec)s:vbitrate=%(video_bitrate)d:mbd=2:aspect=%(video_aspect_ratio)s:acodec=%(audio_codec)s:abitrate=%(audio_bitrate)d:vpass=1' % (locals())
+ if video_gray_flag:
+ lavcopts = lavcopts + ':gray'
+
+ seek_filter = ''
+ if seek_skip is not None:
+ seek_filter = '-ss %s' % (str(seek_skip))
+ if seek_length is not None:
+ seek_filter = seek_filter + ' -endpos %s' % (str(seek_length))
+
+# cmd = "mencoder -quiet -info comment='Arkivist' '%(video_source_filename)s' %(seek_filter)s %(chapter)s -aid %(audio_id)s -o '%(video_final_filename)s' -ffourcc %(video_fourcc_override)s -ovc lavc -oac lavc %(lavcopts)s %(video_filter)s %(audio_filter)s" % locals()
+ cmd = "mencoder -quiet -info comment='Arkivist' '%(video_source_filename)s' %(seek_filter)s %(chapter)s -aid %(audio_id)s -o '%(video_final_filename)s' -ffourcc %(video_fourcc_override)s -ovc lavc -oac mp3lame %(lavcopts)s %(video_filter)s %(audio_filter)s" % locals()
+ return cmd
+
+def compression_estimate (video_length, video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None):
+ """This attempts to figure out the best compression ratio for a given set of compression options.
+ """
+ # TODO Need to account for AVI overhead.
+ skip = int(video_length/9) # offset to skip (-ss option in mencoder)
+ sample_length = 10
+ cmd1 = build_compression_command (video_source_filename, "compression_test_1.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip, sample_length)
+ cmd2 = build_compression_command (video_source_filename, "compression_test_2.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*2, sample_length)
+ cmd3 = build_compression_command (video_source_filename, "compression_test_3.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*4, sample_length)
+ cmd4 = build_compression_command (video_source_filename, "compression_test_4.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*6, sample_length)
+ cmd5 = build_compression_command (video_source_filename, "compression_test_5.avi", video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, skip*8, sample_length)
+ run(cmd1)
+ run(cmd2)
+ run(cmd3)
+ run(cmd4)
+ run(cmd5)
+ size = get_filesize ("compression_test_1.avi")+get_filesize ("compression_test_2.avi")+get_filesize ("compression_test_3.avi")+get_filesize ("compression_test_4.avi")+get_filesize ("compression_test_5.avi")
+ return (size / 5.0)
+
+def compress_video (video_source_filename, video_final_filename, video_target_size, audio_id=128, video_bitrate=1000, video_codec='mpeg4', audio_codec='mp3', video_fourcc_override='FMP4', video_gray_flag=0, video_crop_area=None, video_aspect_ratio='16/9', video_scale=None, video_encode_passes=2, video_deinterlace_flag=0, audio_volume_boost=None, audio_sample_rate=None, audio_bitrate=None, seek_skip=None, seek_length=None, video_chapter=None, verbose_flag=0, dry_run_flag=0):
+ """This compresses the video and audio of the given source video filename to the transcoded filename.
+ This does a two-pass compression (I'm assuming mpeg4, I should probably make this smarter for other formats).
+ """
+ #
+ # do the first pass video compression
+ #
+ #cmd = "mencoder -quiet '%(video_source_filename)s' -ss 65 -endpos 20 -aid %(audio_id)s -o '%(video_final_filename)s' -ffourcc %(video_fourcc_override)s -ovc lavc -oac lavc %(lavcopts)s %(video_filter)s %(audio_filter)s" % locals()
+
+ cmd = build_compression_command (video_source_filename, video_final_filename, video_target_size, audio_id, video_bitrate, video_codec, audio_codec, video_fourcc_override, video_gray_flag, video_crop_area, video_aspect_ratio, video_scale, video_encode_passes, video_deinterlace_flag, audio_volume_boost, audio_sample_rate, audio_bitrate, seek_skip, seek_length, video_chapter)
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+
+ # If not doing two passes then return early.
+ if video_encode_passes!='2':
+ return
+
+ if verbose_flag:
+ video_actual_size = get_filesize (video_final_filename)
+ if video_actual_size > video_target_size:
+ print "======================================================="
+ print "WARNING!"
+ print "First pass compression resulted in"
+ print "actual file size greater than target size."
+ print "Second pass will be too big."
+ print "======================================================="
+
+ #
+ # do the second pass video compression
+ #
+ cmd = cmd.replace ('vpass=1', 'vpass=2')
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+ return
+
+def compress_audio (audio_raw_filename, audio_compressed_filename, audio_lowpass_filter=None, audio_sample_rate=None, audio_bitrate=None, verbose_flag=0, dry_run_flag=0):
+ """This is depricated.
+ This compresses the raw audio file to the compressed audio filename.
+ """
+ cmd = 'lame -h --athaa-sensitivity 1' # --cwlimit 11"
+ if audio_lowpass_filter:
+ cmd = cmd + ' --lowpass ' + audio_lowpass_filter
+ if audio_bitrate:
+ #cmd = cmd + ' --abr ' + audio_bitrate
+ cmd = cmd + ' --cbr -b ' + audio_bitrate
+ if audio_sample_rate:
+ cmd = cmd + ' --resample ' + audio_sample_rate
+ cmd = cmd + ' ' + audio_raw_filename + ' ' + audio_compressed_filename
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ (command_output, exitstatus) = run(cmd)
+ print
+ if exitstatus != 0:
+ raise Exception('ERROR: lame failed to compress raw audio file.')
+
+def mux (video_final_filename, video_transcoded_filename, audio_compressed_filename, video_container_format, verbose_flag=0, dry_run_flag=0):
+ """This is depricated. I used to use a three-pass encoding where I would mix the audio track separately, but
+ this never worked very well (loss of audio sync)."""
+ if video_container_format.lower() == 'mkv': # Matroska
+ mux_mkv (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag, dry_run_flag)
+ if video_container_format.lower() == 'avi':
+ mux_avi (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag, dry_run_flag)
+
+def mux_mkv (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag=0, dry_run_flag=0):
+ """This is depricated."""
+ cmd = 'mkvmerge -o %s --noaudio %s %s' % (video_final_filename, video_transcoded_filename, audio_compressed_filename)
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+
+def mux_avi (video_final_filename, video_transcoded_filename, audio_compressed_filename, verbose_flag=0, dry_run_flag=0):
+ """This is depricated."""
+ pass
+# cmd = "mencoder -quiet -oac copy -ovc copy -o '%s' -audiofile %s '%s'" % (video_final_filename, audio_compressed_filename, video_transcoded_filename)
+# if verbose_flag: print cmd
+# if not dry_run_flag:
+# run(cmd)
+# print
+
+def delete_tmp_files (audio_raw_filename, verbose_flag=0, dry_run_flag=0):
+ global GLOBAL_LOGFILE_NAME
+ file_list = ' '.join([GLOBAL_LOGFILE_NAME, 'divx2pass.log', audio_raw_filename ])
+ cmd = 'rm -f ' + file_list
+ if verbose_flag: print cmd
+ if not dry_run_flag:
+ run(cmd)
+ print
+
+##############################################################################
+# This is the interactive Q&A that is used if a conf file was not given.
+##############################################################################
+def interactive_convert ():
+
+ global prompts, prompts_key_order
+
+ print globals()['__doc__']
+ print
+ print "=============================================="
+ print " Enter '?' at any question to get extra help."
+ print "=============================================="
+ print
+
+ # Ask for the level of options the user wants.
+ # A lot of code just to print a string!
+ level_sort = {0:'', 1:'', 2:''}
+ for k in prompts:
+ level = prompts[k][3]
+ if level < 0 or level > 2:
+ continue
+ level_sort[level] += " " + prompts[k][1] + "\n"
+ level_sort_string = "This sets the level for advanced options prompts. Set 0 for simple, 1 for advanced, or 2 for expert.\n"
+ level_sort_string += "[0] Basic options:\n" + str(level_sort[0]) + "\n"
+ level_sort_string += "[1] Advanced options:\n" + str(level_sort[1]) + "\n"
+ level_sort_string += "[2] Expert options:\n" + str(level_sort[2])
+ c = input_option("Prompt level (0, 1, or 2)?", "1", level_sort_string)
+ max_prompt_level = int(c)
+
+ options = {}
+ for k in prompts_key_order:
+ if k == 'video_aspect_ratio':
+ guess_aspect = get_aspect_ratio(options['video_source_filename'])
+ options[k] = input_option (prompts[k][1], guess_aspect, prompts[k][2], prompts[k][3], max_prompt_level)
+ elif k == 'audio_id':
+ aid_list = get_aid_list (options['video_source_filename'])
+ default_id = '128'
+ if max_prompt_level>=prompts[k][3]:
+ if len(aid_list) > 1:
+ print "This video has more than one audio stream. The following stream audio IDs were found:"
+ for aid in aid_list:
+ print " " + aid
+ default_id = aid_list[0]
+ else:
+ print "WARNING!"
+ print "Rippy was unable to get the list of audio streams from this video."
+ print "If reading directly from a DVD then the DVD device might be busy."
+ print "Using a default setting of stream id 128 (main audio on most DVDs)."
+ default_id = '128'
+ options[k] = input_option (prompts[k][1], default_id, prompts[k][2], prompts[k][3], max_prompt_level)
+ elif k == 'subtitle_id':
+ sid_list = get_sid_list (options['video_source_filename'])
+ default_id = 'None'
+ if max_prompt_level>=prompts[k][3]:
+ if len(sid_list) > 0:
+ print "This video has one or more subtitle streams. The following stream subtitle IDs were found:"
+ for sid in sid_list:
+ print " " + sid
+ #default_id = sid_list[0]
+ default_id = prompts[k][0]
+ else:
+ print "WARNING!"
+ print "Unable to get the list of subtitle streams from this video. It may have none."
+ print "Setting default to None."
+ default_id = 'None'
+ options[k] = input_option (prompts[k][1], default_id, prompts[k][2], prompts[k][3], max_prompt_level)
+ elif k == 'audio_lowpass_filter':
+ lowpass_default = "%.1f" % (math.floor(float(options['audio_sample_rate']) / 2.0))
+ options[k] = input_option (prompts[k][1], lowpass_default, prompts[k][2], prompts[k][3], max_prompt_level)
+ elif k == 'video_bitrate':
+ if options['video_length'].lower() == 'none':
+ options[k] = input_option (prompts[k][1], '1000', prompts[k][2], prompts[k][3], max_prompt_level)
+ else:
+ options[k] = input_option (prompts[k][1], prompts[k][0], prompts[k][2], prompts[k][3], max_prompt_level)
+ else:
+ # don't bother asking for video_target_size or video_bitrate_overhead if video_bitrate was set
+ if (k=='video_target_size' or k=='video_bitrate_overhead') and options['video_bitrate']!='calc':
+ continue
+ # don't bother with crop area if video length is none
+ if k == 'video_crop_area' and options['video_length'].lower() == 'none':
+ options['video_crop_area'] = 'none'
+ continue
+ options[k] = input_option (prompts[k][1], prompts[k][0], prompts[k][2], prompts[k][3], max_prompt_level)
+
+ #options['video_final_filename'] = options['video_final_filename'] + "." + options['video_container_format']
+
+ print "=========================================================================="
+ print "Ready to Rippy!"
+ print
+ print "The following options will be used:"
+ for k,v in options.iteritems():
+ print "%27s : %s" % (k, v)
+
+ print
+ c = input_option("Continue?", "Y")
+ c = c.strip().lower()
+ if c[0] != 'y':
+ print "Exiting..."
+ os._exit(1)
+ return options
+
+def clean_options (d):
+ """This validates and cleans up the options dictionary.
+ After reading options interactively or from a conf file
+ we need to make sure that the values make sense and are
+ converted to the correct type.
+ 1. Any key with "_flag" in it becomes a boolean True or False.
+ 2. Values are normalized ("No", "None", "none" all become "none";
+ "Calcluate", "c", "CALC" all become "calc").
+ 3. Certain values are converted from string to int.
+ 4. Certain combinations of options are invalid or override each other.
+ This is a rather annoying function, but then so it most cleanup work.
+ """
+ for k in d:
+ d[k] = d[k].strip()
+ # convert all flag options to 0 or 1
+ if '_flag' in k:
+ if type(d[k]) is types.StringType:
+ if d[k].strip().lower()[0] in 'yt1': #Yes, True, 1
+ d[k] = 1
+ else:
+ d[k] = 0
+ d['video_bitrate'] = d['video_bitrate'].lower()
+ if d['video_bitrate'][0]=='c':
+ d['video_bitrate']='calc'
+ else:
+ d['video_bitrate'] = int(float(d['video_bitrate']))
+ try:
+ d['video_target_size'] = int(d['video_target_size'])
+ # shorthand magic numbers get automatically expanded
+ if d['video_target_size'] == 180:
+ d['video_target_size'] = 193536000
+ elif d['video_target_size'] == 550:
+ d['video_target_size'] = 580608000
+ elif d['video_target_size'] == 650:
+ d['video_target_size'] = 681984000
+ elif d['video_target_size'] == 700:
+ d['video_target_size'] = 737280000
+ except:
+ d['video_target_size'] = 'none'
+
+ try:
+ d['video_chapter'] = int(d['video_chapter'])
+ except:
+ d['video_chapter'] = None
+
+ try:
+ d['subtitle_id'] = int(d['subtitle_id'])
+ except:
+ d['subtitle_id'] = None
+
+ try:
+ d['video_bitrate_overhead'] = float(d['video_bitrate_overhead'])
+ except:
+ d['video_bitrate_overhead'] = -1.0
+
+ d['audio_bitrate'] = int(d['audio_bitrate'])
+ d['audio_sample_rate'] = int(d['audio_sample_rate'])
+ d['audio_volume_boost'] = d['audio_volume_boost'].lower()
+ if d['audio_volume_boost'][0]=='n':
+ d['audio_volume_boost'] = None
+ else:
+ d['audio_volume_boost'] = d['audio_volume_boost'].replace('db','')
+ d['audio_volume_boost'] = float(d['audio_volume_boost'])
+
+# assert (d['video_bitrate']=='calc' and d['video_target_size']!='none')
+# or (d['video_bitrate']!='calc' and d['video_target_size']=='none')
+
+ d['video_scale'] = d['video_scale'].lower()
+ if d['video_scale'][0]=='n':
+ d['video_scale']='none'
+ else:
+ al = re.findall("([0-9]+).*?([0-9]+)", d['video_scale'])
+ d['video_scale']=al[0][0]+':'+al[0][1]
+ d['video_crop_area'] = d['video_crop_area'].lower()
+ if d['video_crop_area'][0]=='n':
+ d['video_crop_area']='none'
+ d['video_length'] = d['video_length'].lower()
+ if d['video_length'][0]=='c':
+ d['video_length']='calc'
+ elif d['video_length'][0]=='n':
+ d['video_length']='none'
+ else:
+ d['video_length'] = int(float(d['video_length']))
+ if d['video_length']==0:
+ d['video_length'] = 'none'
+ assert (not (d['video_length']=='none' and d['video_bitrate']=='calc'))
+ return d
+
+def main ():
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?', ['help','h','?'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+ command_line_options = dict(optlist)
+ # There are a million ways to cry for help. These are but a few of them.
+ if [elem for elem in command_line_options if elem in ['-h','--h','-?','--?','--help']]:
+ exit_with_usage(0)
+
+ missing = check_missing_requirements()
+ if missing is not None:
+ print
+ print "=========================================================================="
+ print "ERROR!"
+ print "Some required external commands are missing."
+ print "please install the following packages:"
+ print str(missing)
+ print "=========================================================================="
+ print
+ c = input_option("Continue?", "Y")
+ c = c.strip().lower()
+ if c[0] != 'y':
+ print "Exiting..."
+ os._exit(1)
+
+ if len(args) > 0:
+ # cute one-line string-to-dictionary parser (two-lines if you count this comment):
+ options = dict(re.findall('([^: \t\n]*)\s*:\s*(".*"|[^ \t\n]*)', file(args[0]).read()))
+ options = clean_options(options)
+ convert (options)
+ else:
+ options = interactive_convert ()
+ options = clean_options(options)
+ convert (options)
+ print "# Done!"
+
+if __name__ == "__main__":
+ try:
+ start_time = time.time()
+ print time.asctime()
+ main()
+ print time.asctime()
+ print "TOTAL TIME IN MINUTES:",
+ print (time.time() - start_time) / 60.0
+ except Exception, e:
+ tb_dump = traceback.format_exc()
+ print "=========================================================================="
+ print "ERROR -- Unexpected exception in script."
+ print str(e)
+ print str(tb_dump)
+ print "=========================================================================="
+ print >>GLOBAL_LOGFILE, "=========================================================================="
+ print >>GLOBAL_LOGFILE, "ERROR -- Unexpected exception in script."
+ print >>GLOBAL_LOGFILE, str(e)
+ print >>GLOBAL_LOGFILE, str(tb_dump)
+ print >>GLOBAL_LOGFILE, "=========================================================================="
+ exit_with_usage(3)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/rippy.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/script.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/script.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/script.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/script.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,103 @@
+#!/usr/bin/env python
+
+"""This spawns a sub-shell (bash) and gives the user interactive control. The
+entire shell session is logged to a file called script.log. This behaves much
+like the classic BSD command 'script'.
+
+./script.py [-a] [-c command] {logfilename}
+
+ logfilename : This is the name of the log file. Default is script.log.
+ -a : Append to log file. Default is to overwrite log file.
+ -c : spawn command. Default is to spawn the sh shell.
+
+Example:
+
+ This will start a bash shell and append to the log named my_session.log:
+
+ ./script.py -a -c bash my_session.log
+
+"""
+
+import os, sys, time, getopt
+import signal, fcntl, termios, struct
+import traceback
+import pexpect
+
+global_pexpect_instance = None # Used by signal handler
+
+def exit_with_usage():
+
+ print globals()['__doc__']
+ os._exit(1)
+
+def main():
+
+ ######################################################################
+ # Parse the options, arguments, get ready, etc.
+ ######################################################################
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?ac:', ['help','h','?'])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+ options = dict(optlist)
+ if len(args) > 1:
+ exit_with_usage()
+
+ if [elem for elem in options if elem in ['-h','--h','-?','--?','--help']]:
+ print "Help:"
+ exit_with_usage()
+
+ if len(args) == 1:
+ script_filename = args[0]
+ else:
+ script_filename = "script.log"
+ if '-a' in options:
+ fout = file (script_filename, "ab")
+ else:
+ fout = file (script_filename, "wb")
+ if '-c' in options:
+ command = options['-c']
+ else:
+ command = "sh"
+
+ # Begin log with date/time in the form CCCCyymm.hhmmss
+ fout.write ('# %4d%02d%02d.%02d%02d%02d \n' % time.localtime()[:-3])
+
+ ######################################################################
+ # Start the interactive session
+ ######################################################################
+ p = pexpect.spawn(command)
+ p.logfile = fout
+ global global_pexpect_instance
+ global_pexpect_instance = p
+ signal.signal(signal.SIGWINCH, sigwinch_passthrough)
+
+ print "Script recording started. Type ^] (ASCII 29) to escape from the script shell."
+ p.interact(chr(29))
+ fout.close()
+ return 0
+
+def sigwinch_passthrough (sig, data):
+
+ # Check for buggy platforms (see pexpect.setwinsize()).
+ if 'TIOCGWINSZ' in dir(termios):
+ TIOCGWINSZ = termios.TIOCGWINSZ
+ else:
+ TIOCGWINSZ = 1074295912 # assume
+ s = struct.pack ("HHHH", 0, 0, 0, 0)
+ a = struct.unpack ('HHHH', fcntl.ioctl(sys.stdout.fileno(), TIOCGWINSZ , s))
+ global global_pexpect_instance
+ global_pexpect_instance.setwinsize(a[0],a[1])
+
+if __name__ == "__main__":
+ try:
+ main()
+ except SystemExit, e:
+ raise e
+ except Exception, e:
+ print "ERROR"
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/script.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/ssh_session.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/ssh_session.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/ssh_session.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/ssh_session.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,94 @@
+#
+# Eric S. Raymond
+#
+# Greatly modified by Nigel W. Moriarty
+# April 2003
+#
+from pexpect import *
+import os, sys
+import getpass
+import time
+
+class ssh_session:
+
+ "Session with extra state including the password to be used."
+
+ def __init__(self, user, host, password=None, verbose=0):
+
+ self.user = user
+ self.host = host
+ self.verbose = verbose
+ self.password = password
+ self.keys = [
+ 'authenticity',
+ 'assword:',
+ '@@@@@@@@@@@@',
+ 'Command not found.',
+ EOF,
+ ]
+
+ self.f = open('ssh.out','w')
+
+ def __repr__(self):
+
+ outl = 'class :'+self.__class__.__name__
+ for attr in self.__dict__:
+ if attr == 'password':
+ outl += '\n\t'+attr+' : '+'*'*len(self.password)
+ else:
+ outl += '\n\t'+attr+' : '+str(getattr(self, attr))
+ return outl
+
+ def __exec(self, command):
+
+ "Execute a command on the remote host. Return the output."
+ child = spawn(command,
+ #timeout=10,
+ )
+ if self.verbose:
+ sys.stderr.write("-> " + command + "\n")
+ seen = child.expect(self.keys)
+ self.f.write(str(child.before) + str(child.after)+'\n')
+ if seen == 0:
+ child.sendline('yes')
+ seen = child.expect(self.keys)
+ if seen == 1:
+ if not self.password:
+ self.password = getpass.getpass('Remote password: ')
+ child.sendline(self.password)
+ child.readline()
+ time.sleep(5)
+ # Added to allow the background running of remote process
+ if not child.isalive():
+ seen = child.expect(self.keys)
+ if seen == 2:
+ lines = child.readlines()
+ self.f.write(lines)
+ if self.verbose:
+ sys.stderr.write("<- " + child.before + "|\n")
+ try:
+ self.f.write(str(child.before) + str(child.after)+'\n')
+ except:
+ pass
+ self.f.close()
+ return child.before
+
+ def ssh(self, command):
+
+ return self.__exec("ssh -l %s %s \"%s\"" \
+ % (self.user,self.host,command))
+
+ def scp(self, src, dst):
+
+ return self.__exec("scp %s %s@%s:%s" \
+ % (src, session.user, session.host, dst))
+
+ def exists(self, file):
+
+ "Retrieve file permissions of specified remote file."
+ seen = self.ssh("/bin/ls -ld %s" % file)
+ if string.find(seen, "No such file") > -1:
+ return None # File doesn't exist
+ else:
+ return seen.split()[0] # Return permission field of listing.
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/ssh_session.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,72 @@
+#!/usr/bin/env python
+
+"""This starts an SSH tunnel to a given host. If the SSH process ever dies then
+this script will detect that and restart it. I use this under Cygwin to keep
+open encrypted tunnels to port 25 (SMTP), port 143 (IMAP4), and port 110
+(POP3). I set my mail client to talk to localhost and I keep this script
+running in the background.
+
+Note that this is a rather stupid script at the moment because it just looks to
+see if any ssh process is running. It should really make sure that our specific
+ssh process is running. The problem is that ssh is missing a very useful
+feature. It has no way to report the process id of the background daemon that
+it creates with the -f command. This would be a really useful script if I could
+figure a way around this problem. """
+
+import pexpect
+import getpass
+import time
+
+# SMTP:25 IMAP4:143 POP3:110
+tunnel_command = 'ssh -C -N -f -L 25:127.0.0.1:25 -L 143:127.0.0.1:143 -L 110:127.0.0.1:110 %(user)@%(host)'
+host = raw_input('Hostname: ')
+user = raw_input('Username: ')
+X = getpass.getpass('Password: ')
+
+def get_process_info ():
+
+ # This seems to work on both Linux and BSD, but should otherwise be considered highly UNportable.
+
+ ps = pexpect.run ('ps ax -O ppid')
+ pass
+def start_tunnel ():
+ try:
+ ssh_tunnel = pexpect.spawn (tunnel_command % globals())
+ ssh_tunnel.expect ('password:')
+ time.sleep (0.1)
+ ssh_tunnel.sendline (X)
+ time.sleep (60) # Cygwin is slow to update process status.
+ ssh_tunnel.expect (pexpect.EOF)
+
+ except Exception, e:
+ print str(e)
+
+def main ():
+
+ while True:
+ ps = pexpect.spawn ('ps')
+ time.sleep (1)
+ index = ps.expect (['/usr/bin/ssh', pexpect.EOF, pexpect.TIMEOUT])
+ if index == 2:
+ print 'TIMEOUT in ps command...'
+ print str(ps)
+ time.sleep (13)
+ if index == 1:
+ print time.asctime(),
+ print 'restarting tunnel'
+ start_tunnel ()
+ time.sleep (11)
+ print 'tunnel OK'
+ else:
+ # print 'tunnel OK'
+ time.sleep (7)
+
+if __name__ == '__main__':
+ main ()
+
+# This was for older SSH versions that didn't have -f option
+#tunnel_command = 'ssh -C -n -L 25:%(host)s:25 -L 110:%(host)s:110 %(user)s@%(host)s -f nothing.sh'
+#nothing_script = """#!/bin/sh
+#while true; do sleep 53; done
+#"""
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/ssh_tunnel.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/sshls.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/sshls.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/sshls.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/sshls.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,56 @@
+#!/usr/bin/env python
+
+"""This runs 'ls -l' on a remote host using SSH. At the prompts enter hostname,
+user, and password.
+
+$Id: sshls.py 489 2007-11-28 23:40:34Z noah $
+"""
+
+import pexpect
+import getpass, os
+
+def ssh_command (user, host, password, command):
+
+ """This runs a command on the remote host. This could also be done with the
+pxssh class, but this demonstrates what that class does at a simpler level.
+This returns a pexpect.spawn object. This handles the case when you try to
+connect to a new host and ssh asks you if you want to accept the public key
+fingerprint and continue connecting. """
+
+ ssh_newkey = 'Are you sure you want to continue connecting'
+ child = pexpect.spawn('ssh -l %s %s %s'%(user, host, command))
+ i = child.expect([pexpect.TIMEOUT, ssh_newkey, 'password: '])
+ if i == 0: # Timeout
+ print 'ERROR!'
+ print 'SSH could not login. Here is what SSH said:'
+ print child.before, child.after
+ return None
+ if i == 1: # SSH does not have the public key. Just accept it.
+ child.sendline ('yes')
+ child.expect ('password: ')
+ i = child.expect([pexpect.TIMEOUT, 'password: '])
+ if i == 0: # Timeout
+ print 'ERROR!'
+ print 'SSH could not login. Here is what SSH said:'
+ print child.before, child.after
+ return None
+ child.sendline(password)
+ return child
+
+def main ():
+
+ host = raw_input('Hostname: ')
+ user = raw_input('User: ')
+ password = getpass.getpass('Password: ')
+ child = ssh_command (user, host, password, '/bin/ls -l')
+ child.expect(pexpect.EOF)
+ print child.before
+
+if __name__ == '__main__':
+ try:
+ main()
+ except Exception, e:
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/sshls.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/table_test.html
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/table_test.html?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/table_test.html (added)
+++ lldb/trunk/test/pexpect-2.4/examples/table_test.html Fri Mar 11 14:13:06 2011
@@ -0,0 +1,106 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
+<html>
+<head>
+<title>TEST</title>
+</head>
+<style type="text/css">
+a {color: #9f9; text-decoration: none}
+a:hover {color: #0f0}
+hr {color: #0f0}
+html,table,body,textarea,input,form
+{
+font-family: "Courier New", Courier, mono;
+font-size: 8pt;
+color: #0c0;
+background-color: #020;
+margin:0;
+padding:0;
+border:0;
+}
+input { background-color: #010; }
+textarea {
+border-width:1;
+border-style:solid;
+border-color:#0c0;
+padding:3;
+margin:3;
+}
+</style>
+<script>
+var foo="" +
+" 123456789012345678901234567890123456789012345 789012345678901234567890123456789"+
+"0 2345678901234567890123456789012345678901234 6 89012345678901234567890123456789"+
+"01 34567890123456789012345678901234567890123 567 9012345678901234567890123456789"+
+"012 456789012345678901234567890123456789012 45678 012345678901234567890123456789"+
+"0123 5678901234567890123456789012345678901 3456789 12345678901234567890123456789"+
+"01234 67890123456789012345678901234567890 234567890 2345678901234567890123456789"+
+"012345 789012345678901234567890123456789 12345678901 345678901234567890123456789"+
+"0123456 8901234567890123456789012345678 0123456789012 45678901234567890123456789"+
+"01234567 90123456789012345678901234567 901234567890123 5678901234567890123456789"+
+"012345678 012345678901234567890123456 89012345678901234 678901234567890123456789"+
+"0123456789 1234567890123456789012345 7890123456789012345 78901234567890123456789"+
+"01234567890 23456789012345678901234 678901234567890123456 8901234567890123456789"+
+"012345678901 345678901234567890123 56789012345678901234567 901234567890123456789"+
+"0123456789012 4567890123456789012 4567890123456789012345678 0123456789012345678 "+
+"01234567890123 56789012345678901 345678901234567890123456789 12345678901234567 9"+
+"012345678901234 678901234567890 23456789012 567 01234567890 234567890123456 89"+
+"0123456789012345 7890123456789 123457789012 567 012345678901 3456789012345 789"+
+"01234567890123456 89012345678 012345678901234567890123456789012 45678901234 6789"+
+"012345678901234567 901234567 90123456789 12345678901 34567890123 567890123 56789"+
+"0123456789012345678 0123456 8901234567890 3456789 2345678901234 6789012 456789"+
+"01234567890123456789 12345 7890123456789012 0123456789012345 78901 3456789"+
+"012345678901234567890 234 67890123456789012345678901234567890123456 890 23456789"+
+"0123456789012345678901 3 5678901234567890123456789012345678901234567 9 123456789"+
+"01234567890123456789012 456789012345678901234567890123456789012345678 0123456789";
+function start2()
+{
+ // get the reference for the body
+ //var mybody = document.getElementsByTagName("body")[0];
+ var mybody = document.getElementById("replace_me");
+ var myroot = document.getElementById("a_parent");
+ mytable = document.createElement("table");
+ mytablebody = document.createElement("tbody");
+ mytable.setAttribute("border","0");
+ mytable.setAttribute("cellspacing","0");
+ mytable.setAttribute("cellpadding","0");
+ for(var j = 0; j < 24; j++)
+ {
+ mycurrent_row = document.createElement("tr");
+ for(var i = 0; i < 80; i++)
+ {
+ mycurrent_cell = document.createElement("td");
+ offset = (j*80)+i;
+ currenttext = document.createTextNode(foo.substring(offset,offset+1));
+ mycurrent_cell.appendChild(currenttext);
+ mycurrent_row.appendChild(mycurrent_cell);
+ }
+ mytablebody.appendChild(mycurrent_row);
+ }
+ mytable.appendChild(mytablebody);
+ myroot.replaceChild(mytable,mybody);
+ //mybody.appendChild(mytable);
+}
+</script>
+<body onload="start2();">
+<table align="LEFT" border="0" cellspacing="0" cellpadding="0">
+<div id="a_parent">
+<span id="replace_me">
+<tr align="left" valign="left">
+ <td>/</td>
+ <td>h</td>
+ <td>o</td>
+ <td>m</td>
+ <td>e</td>
+ <td>/</td>
+ <td>n</td>
+ <td>o</td>
+ <td>a</td>
+ <td>h</td>
+ <td>/</td>
+ <td> </td>
+</tr>
+</table>
+</span>
+</div>
+</body>
+</html>
\ No newline at end of file
Added: lldb/trunk/test/pexpect-2.4/examples/topip.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/topip.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/topip.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/topip.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,267 @@
+#!/usr/bin/env python
+
+""" This runs netstat on a local or remote server. It calculates some simple
+statistical information on the number of external inet connections. It groups
+by IP address. This can be used to detect if one IP address is taking up an
+excessive number of connections. It can also send an email alert if a given IP
+address exceeds a threshold between runs of the script. This script can be used
+as a drop-in Munin plugin or it can be used stand-alone from cron. I used this
+on a busy web server that would sometimes get hit with denial of service
+attacks. This made it easy to see if a script was opening many multiple
+connections. A typical browser would open fewer than 10 connections at once. A
+script might open over 100 simultaneous connections.
+
+./topip.py [-s server_hostname] [-u username] [-p password] {-a from_addr,to_addr} {-n N} {-v} {--ipv6}
+
+ -s : hostname of the remote server to login to.
+ -u : username to user for login.
+ -p : password to user for login.
+ -n : print stddev for the the number of the top 'N' ipaddresses.
+ -v : verbose - print stats and list of top ipaddresses.
+ -a : send alert if stddev goes over 20.
+ -l : to log message to /var/log/topip.log
+ --ipv6 : this parses netstat output that includes ipv6 format.
+ Note that this actually only works with ipv4 addresses, but for versions of
+ netstat that print in ipv6 format.
+ --stdev=N : Where N is an integer. This sets the trigger point for alerts and logs.
+ Default is to trigger if max value is above 5 standard deviations.
+
+Example:
+
+ This will print stats for the top IP addresses connected to the given host:
+
+ ./topip.py -s www.example.com -u mylogin -p mypassword -n 10 -v
+
+ This will send an alert email if the maxip goes over the stddev trigger value and
+ the the current top ip is the same as the last top ip (/tmp/topip.last):
+
+ ./topip.py -s www.example.com -u mylogin -p mypassword -n 10 -v -a alert at example.com,user at example.com
+
+ This will print the connection stats for the localhost in Munin format:
+
+ ./topip.py
+
+Noah Spurrier
+
+$Id: topip.py 489 2007-11-28 23:40:34Z noah $
+"""
+
+import pexpect, pxssh # See http://pexpect.sourceforge.net/
+import os, sys, time, re, getopt, pickle, getpass, smtplib
+import traceback
+from pprint import pprint
+
+TOPIP_LOG_FILE = '/var/log/topip.log'
+TOPIP_LAST_RUN_STATS = '/var/run/topip.last'
+
+def exit_with_usage():
+
+ print globals()['__doc__']
+ os._exit(1)
+
+def stats(r):
+
+ """This returns a dict of the median, average, standard deviation, min and max of the given sequence.
+
+ >>> from topip import stats
+ >>> print stats([5,6,8,9])
+ {'med': 8, 'max': 9, 'avg': 7.0, 'stddev': 1.5811388300841898, 'min': 5}
+ >>> print stats([1000,1006,1008,1014])
+ {'med': 1008, 'max': 1014, 'avg': 1007.0, 'stddev': 5.0, 'min': 1000}
+ >>> print stats([1,3,4,5,18,16,4,3,3,5,13])
+ {'med': 4, 'max': 18, 'avg': 6.8181818181818183, 'stddev': 5.6216817577237475, 'min': 1}
+ >>> print stats([1,3,4,5,18,16,4,3,3,5,13,14,5,6,7,8,7,6,6,7,5,6,4,14,7])
+ {'med': 6, 'max': 18, 'avg': 7.0800000000000001, 'stddev': 4.3259218670706474, 'min': 1}
+ """
+
+ total = sum(r)
+ avg = float(total)/float(len(r))
+ sdsq = sum([(i-avg)**2 for i in r])
+ s = list(r)
+ s.sort()
+ return dict(zip(['med', 'avg', 'stddev', 'min', 'max'] , (s[len(s)//2], avg, (sdsq/len(r))**.5, min(r), max(r))))
+
+def send_alert (message, subject, addr_from, addr_to, smtp_server='localhost'):
+
+ """This sends an email alert.
+ """
+
+ message = 'From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n' % (addr_from, addr_to, subject) + message
+ server = smtplib.SMTP(smtp_server)
+ server.sendmail(addr_from, addr_to, message)
+ server.quit()
+
+def main():
+
+ ######################################################################
+ ## Parse the options, arguments, etc.
+ ######################################################################
+ try:
+ optlist, args = getopt.getopt(sys.argv[1:], 'h?valqs:u:p:n:', ['help','h','?','ipv6','stddev='])
+ except Exception, e:
+ print str(e)
+ exit_with_usage()
+ options = dict(optlist)
+
+ munin_flag = False
+ if len(args) > 0:
+ if args[0] == 'config':
+ print 'graph_title Netstat Connections per IP'
+ print 'graph_vlabel Socket connections per IP'
+ print 'connections_max.label max'
+ print 'connections_max.info Maximum number of connections per IP'
+ print 'connections_avg.label avg'
+ print 'connections_avg.info Average number of connections per IP'
+ print 'connections_stddev.label stddev'
+ print 'connections_stddev.info Standard deviation'
+ return 0
+ elif args[0] != '':
+ print args, len(args)
+ return 0
+ exit_with_usage()
+ if [elem for elem in options if elem in ['-h','--h','-?','--?','--help']]:
+ print 'Help:'
+ exit_with_usage()
+ if '-s' in options:
+ hostname = options['-s']
+ else:
+ # if host was not specified then assume localhost munin plugin.
+ munin_flag = True
+ hostname = 'localhost'
+ # If localhost then don't ask for username/password.
+ if hostname != 'localhost' and hostname != '127.0.0.1':
+ if '-u' in options:
+ username = options['-u']
+ else:
+ username = raw_input('username: ')
+ if '-p' in options:
+ password = options['-p']
+ else:
+ password = getpass.getpass('password: ')
+ else:
+ use_localhost = True
+
+ if '-l' in options:
+ log_flag = True
+ else:
+ log_flag = False
+ if '-n' in options:
+ average_n = int(options['-n'])
+ else:
+ average_n = None
+ if '-v' in options:
+ verbose = True
+ else:
+ verbose = False
+ if '-a' in options:
+ alert_flag = True
+ (alert_addr_from, alert_addr_to) = tuple(options['-a'].split(','))
+ else:
+ alert_flag = False
+ if '--ipv6' in options:
+ ipv6_flag = True
+ else:
+ ipv6_flag = False
+ if '--stddev' in options:
+ stddev_trigger = float(options['--stddev'])
+ else:
+ stddev_trigger = 5
+
+ if ipv6_flag:
+ netstat_pattern = '(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+::ffff:(\S+):(\S+)\s+.*?\r'
+ else:
+ netstat_pattern = '(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(?:::ffff:)*(\S+):(\S+)\s+.*?\r'
+ #netstat_pattern = '(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s+(\S+):(\S+)\s+.*?\r'
+
+ # run netstat (either locally or via SSH).
+ if use_localhost:
+ p = pexpect.spawn('netstat -n -t')
+ PROMPT = pexpect.TIMEOUT
+ else:
+ p = pxssh.pxssh()
+ p.login(hostname, username, password)
+ p.sendline('netstat -n -t')
+ PROMPT = p.PROMPT
+
+ # loop through each matching netstat_pattern and put the ip address in the list.
+ ip_list = {}
+ try:
+ while 1:
+ i = p.expect([PROMPT, netstat_pattern])
+ if i == 0:
+ break
+ k = p.match.groups()[4]
+ if k in ip_list:
+ ip_list[k] = ip_list[k] + 1
+ else:
+ ip_list[k] = 1
+ except:
+ pass
+
+ # remove a few common, uninteresting addresses from the dictionary.
+ ip_list = dict([ (key,value) for key,value in ip_list.items() if '192.168.' not in key])
+ ip_list = dict([ (key,value) for key,value in ip_list.items() if '127.0.0.1' not in key])
+
+ # sort dict by value (count)
+ #ip_list = sorted(ip_list.iteritems(),lambda x,y:cmp(x[1], y[1]),reverse=True)
+ ip_list = ip_list.items()
+ if len(ip_list) < 1:
+ if verbose: print 'Warning: no networks connections worth looking at.'
+ return 0
+ ip_list.sort(lambda x,y:cmp(y[1],x[1]))
+
+ # generate some stats for the ip addresses found.
+ if average_n <= 1:
+ average_n = None
+ s = stats(zip(*ip_list[0:average_n])[1]) # The * unary operator treats the list elements as arguments
+ s['maxip'] = ip_list[0]
+
+ # print munin-style or verbose results for the stats.
+ if munin_flag:
+ print 'connections_max.value', s['max']
+ print 'connections_avg.value', s['avg']
+ print 'connections_stddev.value', s['stddev']
+ return 0
+ if verbose:
+ pprint (s)
+ print
+ pprint (ip_list[0:average_n])
+
+ # load the stats from the last run.
+ try:
+ last_stats = pickle.load(file(TOPIP_LAST_RUN_STATS))
+ except:
+ last_stats = {'maxip':None}
+
+ if s['maxip'][1] > (s['stddev'] * stddev_trigger) and s['maxip']==last_stats['maxip']:
+ if verbose: print 'The maxip has been above trigger for two consecutive samples.'
+ if alert_flag:
+ if verbose: print 'SENDING ALERT EMAIL'
+ send_alert(str(s), 'ALERT on %s' % hostname, alert_addr_from, alert_addr_to)
+ if log_flag:
+ if verbose: print 'LOGGING THIS EVENT'
+ fout = file(TOPIP_LOG_FILE,'a')
+ #dts = time.strftime('%Y:%m:%d:%H:%M:%S', time.localtime())
+ dts = time.asctime()
+ fout.write ('%s - %d connections from %s\n' % (dts,s['maxip'][1],str(s['maxip'][0])))
+ fout.close()
+
+ # save state to TOPIP_LAST_RUN_STATS
+ try:
+ pickle.dump(s, file(TOPIP_LAST_RUN_STATS,'w'))
+ os.chmod (TOPIP_LAST_RUN_STATS, 0664)
+ except:
+ pass
+ # p.logout()
+
+if __name__ == '__main__':
+ try:
+ main()
+ sys.exit(0)
+ except SystemExit, e:
+ raise e
+ except Exception, e:
+ print str(e)
+ traceback.print_exc()
+ os._exit(1)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/topip.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/examples/uptime.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/examples/uptime.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/examples/uptime.py (added)
+++ lldb/trunk/test/pexpect-2.4/examples/uptime.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,57 @@
+#!/usr/bin/env python
+
+"""This displays uptime information using uptime. This is redundant,
+but it demonstrates expecting for a regular expression that uses subgroups.
+
+$Id: uptime.py 489 2007-11-28 23:40:34Z noah $
+"""
+
+import pexpect
+import re
+
+# There are many different styles of uptime results. I try to parse them all. Yeee!
+# Examples from different machines:
+# [x86] Linux 2.4 (Redhat 7.3)
+# 2:06pm up 63 days, 18 min, 3 users, load average: 0.32, 0.08, 0.02
+# [x86] Linux 2.4.18-14 (Redhat 8.0)
+# 3:07pm up 29 min, 1 user, load average: 2.44, 2.51, 1.57
+# [PPC - G4] MacOS X 10.1 SERVER Edition
+# 2:11PM up 3 days, 13:50, 3 users, load averages: 0.01, 0.00, 0.00
+# [powerpc] Darwin v1-58.corefa.com 8.2.0 Darwin Kernel Version 8.2.0
+# 10:35 up 18:06, 4 users, load averages: 0.52 0.47 0.36
+# [Sparc - R220] Sun Solaris (8)
+# 2:13pm up 22 min(s), 1 user, load average: 0.02, 0.01, 0.01
+# [x86] Linux 2.4.18-14 (Redhat 8)
+# 11:36pm up 4 days, 17:58, 1 user, load average: 0.03, 0.01, 0.00
+# AIX jwdir 2 5 0001DBFA4C00
+# 09:43AM up 23:27, 1 user, load average: 0.49, 0.32, 0.23
+# OpenBSD box3 2.9 GENERIC#653 i386
+# 6:08PM up 4 days, 22:26, 1 user, load averages: 0.13, 0.09, 0.08
+
+# This parses uptime output into the major groups using regex group matching.
+p = pexpect.spawn ('uptime')
+p.expect('up\s+(.*?),\s+([0-9]+) users?,\s+load averages?: ([0-9]+\.[0-9][0-9]),?\s+([0-9]+\.[0-9][0-9]),?\s+([0-9]+\.[0-9][0-9])')
+duration, users, av1, av5, av15 = p.match.groups()
+
+# The duration is a little harder to parse because of all the different
+# styles of uptime. I'm sure there is a way to do this all at once with
+# one single regex, but I bet it would be hard to read and maintain.
+# If anyone wants to send me a version using a single regex I'd be happy to see it.
+days = '0'
+hours = '0'
+mins = '0'
+if 'day' in duration:
+ p.match = re.search('([0-9]+)\s+day',duration)
+ days = str(int(p.match.group(1)))
+if ':' in duration:
+ p.match = re.search('([0-9]+):([0-9]+)',duration)
+ hours = str(int(p.match.group(1)))
+ mins = str(int(p.match.group(2)))
+if 'min' in duration:
+ p.match = re.search('([0-9]+)\s+min',duration)
+ mins = str(int(p.match.group(1)))
+
+# Print the parsed fields in CSV format.
+print 'days, hours, minutes, users, cpu avg 1 min, cpu avg 5 min, cpu avg 15 min'
+print '%s, %s, %s, %s, %s, %s, %s' % (days, hours, mins, users, av1, av5, av15)
+
Propchange: lldb/trunk/test/pexpect-2.4/examples/uptime.py
------------------------------------------------------------------------------
svn:executable = *
Added: lldb/trunk/test/pexpect-2.4/fdpexpect.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/fdpexpect.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/fdpexpect.py (added)
+++ lldb/trunk/test/pexpect-2.4/fdpexpect.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,82 @@
+"""This is like pexpect, but will work on any file descriptor that you pass it.
+So you are reponsible for opening and close the file descriptor.
+
+$Id: fdpexpect.py 505 2007-12-26 21:33:50Z noah $
+"""
+
+from pexpect import *
+import os
+
+__all__ = ['fdspawn']
+
+class fdspawn (spawn):
+
+ """This is like pexpect.spawn but allows you to supply your own open file
+ descriptor. For example, you could use it to read through a file looking
+ for patterns, or to control a modem or serial device. """
+
+ def __init__ (self, fd, args=[], timeout=30, maxread=2000, searchwindowsize=None, logfile=None):
+
+ """This takes a file descriptor (an int) or an object that support the
+ fileno() method (returning an int). All Python file-like objects
+ support fileno(). """
+
+ ### TODO: Add better handling of trying to use fdspawn in place of spawn
+ ### TODO: (overload to allow fdspawn to also handle commands as spawn does.
+
+ if type(fd) != type(0) and hasattr(fd, 'fileno'):
+ fd = fd.fileno()
+
+ if type(fd) != type(0):
+ raise ExceptionPexpect ('The fd argument is not an int. If this is a command string then maybe you want to use pexpect.spawn.')
+
+ try: # make sure fd is a valid file descriptor
+ os.fstat(fd)
+ except OSError:
+ raise ExceptionPexpect, 'The fd argument is not a valid file descriptor.'
+
+ self.args = None
+ self.command = None
+ spawn.__init__(self, None, args, timeout, maxread, searchwindowsize, logfile)
+ self.child_fd = fd
+ self.own_fd = False
+ self.closed = False
+ self.name = '<file descriptor %d>' % fd
+
+ def __del__ (self):
+
+ return
+
+ def close (self):
+
+ if self.child_fd == -1:
+ return
+ if self.own_fd:
+ self.close (self)
+ else:
+ self.flush()
+ os.close(self.child_fd)
+ self.child_fd = -1
+ self.closed = True
+
+ def isalive (self):
+
+ """This checks if the file descriptor is still valid. If os.fstat()
+ does not raise an exception then we assume it is alive. """
+
+ if self.child_fd == -1:
+ return False
+ try:
+ os.fstat(self.child_fd)
+ return True
+ except:
+ return False
+
+ def terminate (self, force=False):
+
+ raise ExceptionPexpect ('This method is not valid for file descriptors.')
+
+ def kill (self, sig):
+
+ return
+
Added: lldb/trunk/test/pexpect-2.4/pexpect.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/pexpect.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/pexpect.py (added)
+++ lldb/trunk/test/pexpect-2.4/pexpect.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,1850 @@
+"""Pexpect is a Python module for spawning child applications and controlling
+them automatically. Pexpect can be used for automating interactive applications
+such as ssh, ftp, passwd, telnet, etc. It can be used to a automate setup
+scripts for duplicating software package installations on different servers. It
+can be used for automated software testing. Pexpect is in the spirit of Don
+Libes' Expect, but Pexpect is pure Python. Other Expect-like modules for Python
+require TCL and Expect or require C extensions to be compiled. Pexpect does not
+use C, Expect, or TCL extensions. It should work on any platform that supports
+the standard Python pty module. The Pexpect interface focuses on ease of use so
+that simple tasks are easy.
+
+There are two main interfaces to Pexpect -- the function, run() and the class,
+spawn. You can call the run() function to execute a command and return the
+output. This is a handy replacement for os.system().
+
+For example::
+
+ pexpect.run('ls -la')
+
+The more powerful interface is the spawn class. You can use this to spawn an
+external child command and then interact with the child by sending lines and
+expecting responses.
+
+For example::
+
+ child = pexpect.spawn('scp foo myname at host.example.com:.')
+ child.expect ('Password:')
+ child.sendline (mypassword)
+
+This works even for commands that ask for passwords or other input outside of
+the normal stdio streams.
+
+Credits: Noah Spurrier, Richard Holden, Marco Molteni, Kimberley Burchett,
+Robert Stone, Hartmut Goebel, Chad Schroeder, Erick Tryzelaar, Dave Kirby, Ids
+vander Molen, George Todd, Noel Taylor, Nicolas D. Cesar, Alexander Gattin,
+Jacques-Etienne Baudoux, Geoffrey Marshall, Francisco Lourenco, Glen Mabey,
+Karthik Gurusamy, Fernando Perez, Corey Minyard, Jon Cohen, Guillaume
+Chazarain, Andrew Ryan, Nick Craig-Wood, Andrew Stone, Jorgen Grahn, John
+Spiegel, Jan Grant (Let me know if I forgot anyone.)
+
+Free, open source, and all that good stuff.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+Pexpect Copyright (c) 2008 Noah Spurrier
+http://pexpect.sourceforge.net/
+
+$Id: pexpect.py 516 2008-05-23 20:46:01Z noah $
+"""
+
+try:
+ import os, sys, time
+ import select
+ import string
+ import re
+ import struct
+ import resource
+ import types
+ import pty
+ import tty
+ import termios
+ import fcntl
+ import errno
+ import traceback
+ import signal
+except ImportError, e:
+ raise ImportError (str(e) + """
+
+A critical module was not found. Probably this operating system does not
+support it. Pexpect is intended for UNIX-like operating systems.""")
+
+__version__ = '2.4'
+__revision__ = '$Revision: 516 $'
+__all__ = ['ExceptionPexpect', 'EOF', 'TIMEOUT', 'spawn', 'run', 'which',
+ 'split_command_line', '__version__', '__revision__']
+
+# Exception classes used by this module.
+class ExceptionPexpect(Exception):
+
+ """Base class for all exceptions raised by this module.
+ """
+
+ def __init__(self, value):
+
+ self.value = value
+
+ def __str__(self):
+
+ return str(self.value)
+
+ def get_trace(self):
+
+ """This returns an abbreviated stack trace with lines that only concern
+ the caller. In other words, the stack trace inside the Pexpect module
+ is not included. """
+
+ tblist = traceback.extract_tb(sys.exc_info()[2])
+ #tblist = filter(self.__filter_not_pexpect, tblist)
+ tblist = [item for item in tblist if self.__filter_not_pexpect(item)]
+ tblist = traceback.format_list(tblist)
+ return ''.join(tblist)
+
+ def __filter_not_pexpect(self, trace_list_item):
+
+ """This returns True if list item 0 the string 'pexpect.py' in it. """
+
+ if trace_list_item[0].find('pexpect.py') == -1:
+ return True
+ else:
+ return False
+
+class EOF(ExceptionPexpect):
+
+ """Raised when EOF is read from a child. This usually means the child has exited."""
+
+class TIMEOUT(ExceptionPexpect):
+
+ """Raised when a read time exceeds the timeout. """
+
+##class TIMEOUT_PATTERN(TIMEOUT):
+## """Raised when the pattern match time exceeds the timeout.
+## This is different than a read TIMEOUT because the child process may
+## give output, thus never give a TIMEOUT, but the output
+## may never match a pattern.
+## """
+##class MAXBUFFER(ExceptionPexpect):
+## """Raised when a scan buffer fills before matching an expected pattern."""
+
+def run (command, timeout=-1, withexitstatus=False, events=None, extra_args=None, logfile=None, cwd=None, env=None):
+
+ """
+ This function runs the given command; waits for it to finish; then
+ returns all output as a string. STDERR is included in output. If the full
+ path to the command is not given then the path is searched.
+
+ Note that lines are terminated by CR/LF (\\r\\n) combination even on
+ UNIX-like systems because this is the standard for pseudo ttys. If you set
+ 'withexitstatus' to true, then run will return a tuple of (command_output,
+ exitstatus). If 'withexitstatus' is false then this returns just
+ command_output.
+
+ The run() function can often be used instead of creating a spawn instance.
+ For example, the following code uses spawn::
+
+ from pexpect import *
+ child = spawn('scp foo myname at host.example.com:.')
+ child.expect ('(?i)password')
+ child.sendline (mypassword)
+
+ The previous code can be replace with the following::
+
+ from pexpect import *
+ run ('scp foo myname at host.example.com:.', events={'(?i)password': mypassword})
+
+ Examples
+ ========
+
+ Start the apache daemon on the local machine::
+
+ from pexpect import *
+ run ("/usr/local/apache/bin/apachectl start")
+
+ Check in a file using SVN::
+
+ from pexpect import *
+ run ("svn ci -m 'automatic commit' my_file.py")
+
+ Run a command and capture exit status::
+
+ from pexpect import *
+ (command_output, exitstatus) = run ('ls -l /bin', withexitstatus=1)
+
+ Tricky Examples
+ ===============
+
+ The following will run SSH and execute 'ls -l' on the remote machine. The
+ password 'secret' will be sent if the '(?i)password' pattern is ever seen::
+
+ run ("ssh username at machine.example.com 'ls -l'", events={'(?i)password':'secret\\n'})
+
+ This will start mencoder to rip a video from DVD. This will also display
+ progress ticks every 5 seconds as it runs. For example::
+
+ from pexpect import *
+ def print_ticks(d):
+ print d['event_count'],
+ run ("mencoder dvd://1 -o video.avi -oac copy -ovc copy", events={TIMEOUT:print_ticks}, timeout=5)
+
+ The 'events' argument should be a dictionary of patterns and responses.
+ Whenever one of the patterns is seen in the command out run() will send the
+ associated response string. Note that you should put newlines in your
+ string if Enter is necessary. The responses may also contain callback
+ functions. Any callback is function that takes a dictionary as an argument.
+ The dictionary contains all the locals from the run() function, so you can
+ access the child spawn object or any other variable defined in run()
+ (event_count, child, and extra_args are the most useful). A callback may
+ return True to stop the current run process otherwise run() continues until
+ the next event. A callback may also return a string which will be sent to
+ the child. 'extra_args' is not used by directly run(). It provides a way to
+ pass data to a callback function through run() through the locals
+ dictionary passed to a callback. """
+
+ if timeout == -1:
+ child = spawn(command, maxread=2000, logfile=logfile, cwd=cwd, env=env)
+ else:
+ child = spawn(command, timeout=timeout, maxread=2000, logfile=logfile, cwd=cwd, env=env)
+ if events is not None:
+ patterns = events.keys()
+ responses = events.values()
+ else:
+ patterns=None # We assume that EOF or TIMEOUT will save us.
+ responses=None
+ child_result_list = []
+ event_count = 0
+ while 1:
+ try:
+ index = child.expect (patterns)
+ if type(child.after) in types.StringTypes:
+ child_result_list.append(child.before + child.after)
+ else: # child.after may have been a TIMEOUT or EOF, so don't cat those.
+ child_result_list.append(child.before)
+ if type(responses[index]) in types.StringTypes:
+ child.send(responses[index])
+ elif type(responses[index]) is types.FunctionType:
+ callback_result = responses[index](locals())
+ sys.stdout.flush()
+ if type(callback_result) in types.StringTypes:
+ child.send(callback_result)
+ elif callback_result:
+ break
+ else:
+ raise TypeError ('The callback must be a string or function type.')
+ event_count = event_count + 1
+ except TIMEOUT, e:
+ child_result_list.append(child.before)
+ break
+ except EOF, e:
+ child_result_list.append(child.before)
+ break
+ child_result = ''.join(child_result_list)
+ if withexitstatus:
+ child.close()
+ return (child_result, child.exitstatus)
+ else:
+ return child_result
+
+class spawn (object):
+
+ """This is the main class interface for Pexpect. Use this class to start
+ and control child applications. """
+
+ def __init__(self, command, args=[], timeout=30, maxread=2000, searchwindowsize=None, logfile=None, cwd=None, env=None):
+
+ """This is the constructor. The command parameter may be a string that
+ includes a command and any arguments to the command. For example::
+
+ child = pexpect.spawn ('/usr/bin/ftp')
+ child = pexpect.spawn ('/usr/bin/ssh user at example.com')
+ child = pexpect.spawn ('ls -latr /tmp')
+
+ You may also construct it with a list of arguments like so::
+
+ child = pexpect.spawn ('/usr/bin/ftp', [])
+ child = pexpect.spawn ('/usr/bin/ssh', ['user at example.com'])
+ child = pexpect.spawn ('ls', ['-latr', '/tmp'])
+
+ After this the child application will be created and will be ready to
+ talk to. For normal use, see expect() and send() and sendline().
+
+ Remember that Pexpect does NOT interpret shell meta characters such as
+ redirect, pipe, or wild cards (>, |, or *). This is a common mistake.
+ If you want to run a command and pipe it through another command then
+ you must also start a shell. For example::
+
+ child = pexpect.spawn('/bin/bash -c "ls -l | grep LOG > log_list.txt"')
+ child.expect(pexpect.EOF)
+
+ The second form of spawn (where you pass a list of arguments) is useful
+ in situations where you wish to spawn a command and pass it its own
+ argument list. This can make syntax more clear. For example, the
+ following is equivalent to the previous example::
+
+ shell_cmd = 'ls -l | grep LOG > log_list.txt'
+ child = pexpect.spawn('/bin/bash', ['-c', shell_cmd])
+ child.expect(pexpect.EOF)
+
+ The maxread attribute sets the read buffer size. This is maximum number
+ of bytes that Pexpect will try to read from a TTY at one time. Setting
+ the maxread size to 1 will turn off buffering. Setting the maxread
+ value higher may help performance in cases where large amounts of
+ output are read back from the child. This feature is useful in
+ conjunction with searchwindowsize.
+
+ The searchwindowsize attribute sets the how far back in the incomming
+ seach buffer Pexpect will search for pattern matches. Every time
+ Pexpect reads some data from the child it will append the data to the
+ incomming buffer. The default is to search from the beginning of the
+ imcomming buffer each time new data is read from the child. But this is
+ very inefficient if you are running a command that generates a large
+ amount of data where you want to match The searchwindowsize does not
+ effect the size of the incomming data buffer. You will still have
+ access to the full buffer after expect() returns.
+
+ The logfile member turns on or off logging. All input and output will
+ be copied to the given file object. Set logfile to None to stop
+ logging. This is the default. Set logfile to sys.stdout to echo
+ everything to standard output. The logfile is flushed after each write.
+
+ Example log input and output to a file::
+
+ child = pexpect.spawn('some_command')
+ fout = file('mylog.txt','w')
+ child.logfile = fout
+
+ Example log to stdout::
+
+ child = pexpect.spawn('some_command')
+ child.logfile = sys.stdout
+
+ The logfile_read and logfile_send members can be used to separately log
+ the input from the child and output sent to the child. Sometimes you
+ don't want to see everything you write to the child. You only want to
+ log what the child sends back. For example::
+
+ child = pexpect.spawn('some_command')
+ child.logfile_read = sys.stdout
+
+ To separately log output sent to the child use logfile_send::
+
+ self.logfile_send = fout
+
+ The delaybeforesend helps overcome a weird behavior that many users
+ were experiencing. The typical problem was that a user would expect() a
+ "Password:" prompt and then immediately call sendline() to send the
+ password. The user would then see that their password was echoed back
+ to them. Passwords don't normally echo. The problem is caused by the
+ fact that most applications print out the "Password" prompt and then
+ turn off stdin echo, but if you send your password before the
+ application turned off echo, then you get your password echoed.
+ Normally this wouldn't be a problem when interacting with a human at a
+ real keyboard. If you introduce a slight delay just before writing then
+ this seems to clear up the problem. This was such a common problem for
+ many users that I decided that the default pexpect behavior should be
+ to sleep just before writing to the child application. 1/20th of a
+ second (50 ms) seems to be enough to clear up the problem. You can set
+ delaybeforesend to 0 to return to the old behavior. Most Linux machines
+ don't like this to be below 0.03. I don't know why.
+
+ Note that spawn is clever about finding commands on your path.
+ It uses the same logic that "which" uses to find executables.
+
+ If you wish to get the exit status of the child you must call the
+ close() method. The exit or signal status of the child will be stored
+ in self.exitstatus or self.signalstatus. If the child exited normally
+ then exitstatus will store the exit return code and signalstatus will
+ be None. If the child was terminated abnormally with a signal then
+ signalstatus will store the signal value and exitstatus will be None.
+ If you need more detail you can also read the self.status member which
+ stores the status returned by os.waitpid. You can interpret this using
+ os.WIFEXITED/os.WEXITSTATUS or os.WIFSIGNALED/os.TERMSIG. """
+
+ self.STDIN_FILENO = pty.STDIN_FILENO
+ self.STDOUT_FILENO = pty.STDOUT_FILENO
+ self.STDERR_FILENO = pty.STDERR_FILENO
+ self.stdin = sys.stdin
+ self.stdout = sys.stdout
+ self.stderr = sys.stderr
+
+ self.searcher = None
+ self.ignorecase = False
+ self.before = None
+ self.after = None
+ self.match = None
+ self.match_index = None
+ self.terminated = True
+ self.exitstatus = None
+ self.signalstatus = None
+ self.status = None # status returned by os.waitpid
+ self.flag_eof = False
+ self.pid = None
+ self.child_fd = -1 # initially closed
+ self.timeout = timeout
+ self.delimiter = EOF
+ self.logfile = logfile
+ self.logfile_read = None # input from child (read_nonblocking)
+ self.logfile_send = None # output to send (send, sendline)
+ self.maxread = maxread # max bytes to read at one time into buffer
+ self.buffer = '' # This is the read buffer. See maxread.
+ self.searchwindowsize = searchwindowsize # Anything before searchwindowsize point is preserved, but not searched.
+ # Most Linux machines don't like delaybeforesend to be below 0.03 (30 ms).
+ self.delaybeforesend = 0.05 # Sets sleep time used just before sending data to child. Time in seconds.
+ self.delayafterclose = 0.1 # Sets delay in close() method to allow kernel time to update process status. Time in seconds.
+ self.delayafterterminate = 0.1 # Sets delay in terminate() method to allow kernel time to update process status. Time in seconds.
+ self.softspace = False # File-like object.
+ self.name = '<' + repr(self) + '>' # File-like object.
+ self.encoding = None # File-like object.
+ self.closed = True # File-like object.
+ self.cwd = cwd
+ self.env = env
+ self.__irix_hack = (sys.platform.lower().find('irix')>=0) # This flags if we are running on irix
+ # Solaris uses internal __fork_pty(). All others use pty.fork().
+ if (sys.platform.lower().find('solaris')>=0) or (sys.platform.lower().find('sunos5')>=0):
+ self.use_native_pty_fork = False
+ else:
+ self.use_native_pty_fork = True
+
+
+ # allow dummy instances for subclasses that may not use command or args.
+ if command is None:
+ self.command = None
+ self.args = None
+ self.name = '<pexpect factory incomplete>'
+ else:
+ self._spawn (command, args)
+
+ def __del__(self):
+
+ """This makes sure that no system resources are left open. Python only
+ garbage collects Python objects. OS file descriptors are not Python
+ objects, so they must be handled explicitly. If the child file
+ descriptor was opened outside of this class (passed to the constructor)
+ then this does not close it. """
+
+ if not self.closed:
+ # It is possible for __del__ methods to execute during the
+ # teardown of the Python VM itself. Thus self.close() may
+ # trigger an exception because os.close may be None.
+ # -- Fernando Perez
+ try:
+ self.close()
+ except:
+ pass
+
+ def __str__(self):
+
+ """This returns a human-readable string that represents the state of
+ the object. """
+
+ s = []
+ s.append(repr(self))
+ s.append('version: ' + __version__ + ' (' + __revision__ + ')')
+ s.append('command: ' + str(self.command))
+ s.append('args: ' + str(self.args))
+ s.append('searcher: ' + str(self.searcher))
+ s.append('buffer (last 100 chars): ' + str(self.buffer)[-100:])
+ s.append('before (last 100 chars): ' + str(self.before)[-100:])
+ s.append('after: ' + str(self.after))
+ s.append('match: ' + str(self.match))
+ s.append('match_index: ' + str(self.match_index))
+ s.append('exitstatus: ' + str(self.exitstatus))
+ s.append('flag_eof: ' + str(self.flag_eof))
+ s.append('pid: ' + str(self.pid))
+ s.append('child_fd: ' + str(self.child_fd))
+ s.append('closed: ' + str(self.closed))
+ s.append('timeout: ' + str(self.timeout))
+ s.append('delimiter: ' + str(self.delimiter))
+ s.append('logfile: ' + str(self.logfile))
+ s.append('logfile_read: ' + str(self.logfile_read))
+ s.append('logfile_send: ' + str(self.logfile_send))
+ s.append('maxread: ' + str(self.maxread))
+ s.append('ignorecase: ' + str(self.ignorecase))
+ s.append('searchwindowsize: ' + str(self.searchwindowsize))
+ s.append('delaybeforesend: ' + str(self.delaybeforesend))
+ s.append('delayafterclose: ' + str(self.delayafterclose))
+ s.append('delayafterterminate: ' + str(self.delayafterterminate))
+ return '\n'.join(s)
+
+ def _spawn(self,command,args=[]):
+
+ """This starts the given command in a child process. This does all the
+ fork/exec type of stuff for a pty. This is called by __init__. If args
+ is empty then command will be parsed (split on spaces) and args will be
+ set to parsed arguments. """
+
+ # The pid and child_fd of this object get set by this method.
+ # Note that it is difficult for this method to fail.
+ # You cannot detect if the child process cannot start.
+ # So the only way you can tell if the child process started
+ # or not is to try to read from the file descriptor. If you get
+ # EOF immediately then it means that the child is already dead.
+ # That may not necessarily be bad because you may haved spawned a child
+ # that performs some task; creates no stdout output; and then dies.
+
+ # If command is an int type then it may represent a file descriptor.
+ if type(command) == type(0):
+ raise ExceptionPexpect ('Command is an int type. If this is a file descriptor then maybe you want to use fdpexpect.fdspawn which takes an existing file descriptor instead of a command string.')
+
+ if type (args) != type([]):
+ raise TypeError ('The argument, args, must be a list.')
+
+ if args == []:
+ self.args = split_command_line(command)
+ self.command = self.args[0]
+ else:
+ self.args = args[:] # work with a copy
+ self.args.insert (0, command)
+ self.command = command
+
+ command_with_path = which(self.command)
+ if command_with_path is None:
+ raise ExceptionPexpect ('The command was not found or was not executable: %s.' % self.command)
+ self.command = command_with_path
+ self.args[0] = self.command
+
+ self.name = '<' + ' '.join (self.args) + '>'
+
+ assert self.pid is None, 'The pid member should be None.'
+ assert self.command is not None, 'The command member should not be None.'
+
+ if self.use_native_pty_fork:
+ try:
+ self.pid, self.child_fd = pty.fork()
+ except OSError, e:
+ raise ExceptionPexpect('Error! pty.fork() failed: ' + str(e))
+ else: # Use internal __fork_pty
+ self.pid, self.child_fd = self.__fork_pty()
+
+ if self.pid == 0: # Child
+ try:
+ self.child_fd = sys.stdout.fileno() # used by setwinsize()
+ self.setwinsize(24, 80)
+ except:
+ # Some platforms do not like setwinsize (Cygwin).
+ # This will cause problem when running applications that
+ # are very picky about window size.
+ # This is a serious limitation, but not a show stopper.
+ pass
+ # Do not allow child to inherit open file descriptors from parent.
+ max_fd = resource.getrlimit(resource.RLIMIT_NOFILE)[0]
+ for i in range (3, max_fd):
+ try:
+ os.close (i)
+ except OSError:
+ pass
+
+ # I don't know why this works, but ignoring SIGHUP fixes a
+ # problem when trying to start a Java daemon with sudo
+ # (specifically, Tomcat).
+ signal.signal(signal.SIGHUP, signal.SIG_IGN)
+
+ if self.cwd is not None:
+ os.chdir(self.cwd)
+ if self.env is None:
+ os.execv(self.command, self.args)
+ else:
+ os.execvpe(self.command, self.args, self.env)
+
+ # Parent
+ self.terminated = False
+ self.closed = False
+
+ def __fork_pty(self):
+
+ """This implements a substitute for the forkpty system call. This
+ should be more portable than the pty.fork() function. Specifically,
+ this should work on Solaris.
+
+ Modified 10.06.05 by Geoff Marshall: Implemented __fork_pty() method to
+ resolve the issue with Python's pty.fork() not supporting Solaris,
+ particularly ssh. Based on patch to posixmodule.c authored by Noah
+ Spurrier::
+
+ http://mail.python.org/pipermail/python-dev/2003-May/035281.html
+
+ """
+
+ parent_fd, child_fd = os.openpty()
+ if parent_fd < 0 or child_fd < 0:
+ raise ExceptionPexpect, "Error! Could not open pty with os.openpty()."
+
+ pid = os.fork()
+ if pid < 0:
+ raise ExceptionPexpect, "Error! Failed os.fork()."
+ elif pid == 0:
+ # Child.
+ os.close(parent_fd)
+ self.__pty_make_controlling_tty(child_fd)
+
+ os.dup2(child_fd, 0)
+ os.dup2(child_fd, 1)
+ os.dup2(child_fd, 2)
+
+ if child_fd > 2:
+ os.close(child_fd)
+ else:
+ # Parent.
+ os.close(child_fd)
+
+ return pid, parent_fd
+
+ def __pty_make_controlling_tty(self, tty_fd):
+
+ """This makes the pseudo-terminal the controlling tty. This should be
+ more portable than the pty.fork() function. Specifically, this should
+ work on Solaris. """
+
+ child_name = os.ttyname(tty_fd)
+
+ # Disconnect from controlling tty if still connected.
+ try:
+ fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY);
+ if fd >= 0:
+ os.close(fd)
+ except:
+ # We are already disconnected. Perhaps we are running inside cron.
+ pass
+
+ os.setsid()
+
+ # Verify we are disconnected from controlling tty
+ try:
+ fd = os.open("/dev/tty", os.O_RDWR | os.O_NOCTTY);
+ if fd >= 0:
+ os.close(fd)
+ raise ExceptionPexpect, "Error! We are not disconnected from a controlling tty."
+ except:
+ # Good! We are disconnected from a controlling tty.
+ pass
+
+ # Verify we can open child pty.
+ fd = os.open(child_name, os.O_RDWR);
+ if fd < 0:
+ raise ExceptionPexpect, "Error! Could not open child pty, " + child_name
+ else:
+ os.close(fd)
+
+ # Verify we now have a controlling tty.
+ fd = os.open("/dev/tty", os.O_WRONLY)
+ if fd < 0:
+ raise ExceptionPexpect, "Error! Could not open controlling tty, /dev/tty"
+ else:
+ os.close(fd)
+
+ def fileno (self): # File-like object.
+
+ """This returns the file descriptor of the pty for the child.
+ """
+
+ return self.child_fd
+
+ def close (self, force=True): # File-like object.
+
+ """This closes the connection with the child application. Note that
+ calling close() more than once is valid. This emulates standard Python
+ behavior with files. Set force to True if you want to make sure that
+ the child is terminated (SIGKILL is sent if the child ignores SIGHUP
+ and SIGINT). """
+
+ if not self.closed:
+ self.flush()
+ os.close (self.child_fd)
+ time.sleep(self.delayafterclose) # Give kernel time to update process status.
+ if self.isalive():
+ if not self.terminate(force):
+ raise ExceptionPexpect ('close() could not terminate the child using terminate()')
+ self.child_fd = -1
+ self.closed = True
+ #self.pid = None
+
+ def flush (self): # File-like object.
+
+ """This does nothing. It is here to support the interface for a
+ File-like object. """
+
+ pass
+
+ def isatty (self): # File-like object.
+
+ """This returns True if the file descriptor is open and connected to a
+ tty(-like) device, else False. """
+
+ return os.isatty(self.child_fd)
+
+ def waitnoecho (self, timeout=-1):
+
+ """This waits until the terminal ECHO flag is set False. This returns
+ True if the echo mode is off. This returns False if the ECHO flag was
+ not set False before the timeout. This can be used to detect when the
+ child is waiting for a password. Usually a child application will turn
+ off echo mode when it is waiting for the user to enter a password. For
+ example, instead of expecting the "password:" prompt you can wait for
+ the child to set ECHO off::
+
+ p = pexpect.spawn ('ssh user at example.com')
+ p.waitnoecho()
+ p.sendline(mypassword)
+
+ If timeout is None then this method to block forever until ECHO flag is
+ False.
+
+ """
+
+ if timeout == -1:
+ timeout = self.timeout
+ if timeout is not None:
+ end_time = time.time() + timeout
+ while True:
+ if not self.getecho():
+ return True
+ if timeout < 0 and timeout is not None:
+ return False
+ if timeout is not None:
+ timeout = end_time - time.time()
+ time.sleep(0.1)
+
+ def getecho (self):
+
+ """This returns the terminal echo mode. This returns True if echo is
+ on or False if echo is off. Child applications that are expecting you
+ to enter a password often set ECHO False. See waitnoecho(). """
+
+ attr = termios.tcgetattr(self.child_fd)
+ if attr[3] & termios.ECHO:
+ return True
+ return False
+
+ def setecho (self, state):
+
+ """This sets the terminal echo mode on or off. Note that anything the
+ child sent before the echo will be lost, so you should be sure that
+ your input buffer is empty before you call setecho(). For example, the
+ following will work as expected::
+
+ p = pexpect.spawn('cat')
+ p.sendline ('1234') # We will see this twice (once from tty echo and again from cat).
+ p.expect (['1234'])
+ p.expect (['1234'])
+ p.setecho(False) # Turn off tty echo
+ p.sendline ('abcd') # We will set this only once (echoed by cat).
+ p.sendline ('wxyz') # We will set this only once (echoed by cat)
+ p.expect (['abcd'])
+ p.expect (['wxyz'])
+
+ The following WILL NOT WORK because the lines sent before the setecho
+ will be lost::
+
+ p = pexpect.spawn('cat')
+ p.sendline ('1234') # We will see this twice (once from tty echo and again from cat).
+ p.setecho(False) # Turn off tty echo
+ p.sendline ('abcd') # We will set this only once (echoed by cat).
+ p.sendline ('wxyz') # We will set this only once (echoed by cat)
+ p.expect (['1234'])
+ p.expect (['1234'])
+ p.expect (['abcd'])
+ p.expect (['wxyz'])
+ """
+
+ self.child_fd
+ attr = termios.tcgetattr(self.child_fd)
+ if state:
+ attr[3] = attr[3] | termios.ECHO
+ else:
+ attr[3] = attr[3] & ~termios.ECHO
+ # I tried TCSADRAIN and TCSAFLUSH, but these were inconsistent
+ # and blocked on some platforms. TCSADRAIN is probably ideal if it worked.
+ termios.tcsetattr(self.child_fd, termios.TCSANOW, attr)
+
+ def read_nonblocking (self, size = 1, timeout = -1):
+
+ """This reads at most size characters from the child application. It
+ includes a timeout. If the read does not complete within the timeout
+ period then a TIMEOUT exception is raised. If the end of file is read
+ then an EOF exception will be raised. If a log file was set using
+ setlog() then all data will also be written to the log file.
+
+ If timeout is None then the read may block indefinitely. If timeout is -1
+ then the self.timeout value is used. If timeout is 0 then the child is
+ polled and if there was no data immediately ready then this will raise
+ a TIMEOUT exception.
+
+ The timeout refers only to the amount of time to read at least one
+ character. This is not effected by the 'size' parameter, so if you call
+ read_nonblocking(size=100, timeout=30) and only one character is
+ available right away then one character will be returned immediately.
+ It will not wait for 30 seconds for another 99 characters to come in.
+
+ This is a wrapper around os.read(). It uses select.select() to
+ implement the timeout. """
+
+ if self.closed:
+ raise ValueError ('I/O operation on closed file in read_nonblocking().')
+
+ if timeout == -1:
+ timeout = self.timeout
+
+ # Note that some systems such as Solaris do not give an EOF when
+ # the child dies. In fact, you can still try to read
+ # from the child_fd -- it will block forever or until TIMEOUT.
+ # For this case, I test isalive() before doing any reading.
+ # If isalive() is false, then I pretend that this is the same as EOF.
+ if not self.isalive():
+ r,w,e = self.__select([self.child_fd], [], [], 0) # timeout of 0 means "poll"
+ if not r:
+ self.flag_eof = True
+ raise EOF ('End Of File (EOF) in read_nonblocking(). Braindead platform.')
+ elif self.__irix_hack:
+ # This is a hack for Irix. It seems that Irix requires a long delay before checking isalive.
+ # This adds a 2 second delay, but only when the child is terminated.
+ r, w, e = self.__select([self.child_fd], [], [], 2)
+ if not r and not self.isalive():
+ self.flag_eof = True
+ raise EOF ('End Of File (EOF) in read_nonblocking(). Pokey platform.')
+
+ r,w,e = self.__select([self.child_fd], [], [], timeout)
+
+ if not r:
+ if not self.isalive():
+ # Some platforms, such as Irix, will claim that their processes are alive;
+ # then timeout on the select; and then finally admit that they are not alive.
+ self.flag_eof = True
+ raise EOF ('End of File (EOF) in read_nonblocking(). Very pokey platform.')
+ else:
+ raise TIMEOUT ('Timeout exceeded in read_nonblocking().')
+
+ if self.child_fd in r:
+ try:
+ s = os.read(self.child_fd, size)
+ except OSError, e: # Linux does this
+ self.flag_eof = True
+ raise EOF ('End Of File (EOF) in read_nonblocking(). Exception style platform.')
+ if s == '': # BSD style
+ self.flag_eof = True
+ raise EOF ('End Of File (EOF) in read_nonblocking(). Empty string style platform.')
+
+ if self.logfile is not None:
+ self.logfile.write (s)
+ self.logfile.flush()
+ if self.logfile_read is not None:
+ self.logfile_read.write (s)
+ self.logfile_read.flush()
+
+ return s
+
+ raise ExceptionPexpect ('Reached an unexpected state in read_nonblocking().')
+
+ def read (self, size = -1): # File-like object.
+
+ """This reads at most "size" bytes from the file (less if the read hits
+ EOF before obtaining size bytes). If the size argument is negative or
+ omitted, read all data until EOF is reached. The bytes are returned as
+ a string object. An empty string is returned when EOF is encountered
+ immediately. """
+
+ if size == 0:
+ return ''
+ if size < 0:
+ self.expect (self.delimiter) # delimiter default is EOF
+ return self.before
+
+ # I could have done this more directly by not using expect(), but
+ # I deliberately decided to couple read() to expect() so that
+ # I would catch any bugs early and ensure consistant behavior.
+ # It's a little less efficient, but there is less for me to
+ # worry about if I have to later modify read() or expect().
+ # Note, it's OK if size==-1 in the regex. That just means it
+ # will never match anything in which case we stop only on EOF.
+ cre = re.compile('.{%d}' % size, re.DOTALL)
+ index = self.expect ([cre, self.delimiter]) # delimiter default is EOF
+ if index == 0:
+ return self.after ### self.before should be ''. Should I assert this?
+ return self.before
+
+ def readline (self, size = -1): # File-like object.
+
+ """This reads and returns one entire line. A trailing newline is kept
+ in the string, but may be absent when a file ends with an incomplete
+ line. Note: This readline() looks for a \\r\\n pair even on UNIX
+ because this is what the pseudo tty device returns. So contrary to what
+ you may expect you will receive the newline as \\r\\n. An empty string
+ is returned when EOF is hit immediately. Currently, the size argument is
+ mostly ignored, so this behavior is not standard for a file-like
+ object. If size is 0 then an empty string is returned. """
+
+ if size == 0:
+ return ''
+ index = self.expect (['\r\n', self.delimiter]) # delimiter default is EOF
+ if index == 0:
+ return self.before + '\r\n'
+ else:
+ return self.before
+
+ def __iter__ (self): # File-like object.
+
+ """This is to support iterators over a file-like object.
+ """
+
+ return self
+
+ def next (self): # File-like object.
+
+ """This is to support iterators over a file-like object.
+ """
+
+ result = self.readline()
+ if result == "":
+ raise StopIteration
+ return result
+
+ def readlines (self, sizehint = -1): # File-like object.
+
+ """This reads until EOF using readline() and returns a list containing
+ the lines thus read. The optional "sizehint" argument is ignored. """
+
+ lines = []
+ while True:
+ line = self.readline()
+ if not line:
+ break
+ lines.append(line)
+ return lines
+
+ def write(self, s): # File-like object.
+
+ """This is similar to send() except that there is no return value.
+ """
+
+ self.send (s)
+
+ def writelines (self, sequence): # File-like object.
+
+ """This calls write() for each element in the sequence. The sequence
+ can be any iterable object producing strings, typically a list of
+ strings. This does not add line separators There is no return value.
+ """
+
+ for s in sequence:
+ self.write (s)
+
+ def send(self, s):
+
+ """This sends a string to the child process. This returns the number of
+ bytes written. If a log file was set then the data is also written to
+ the log. """
+
+ time.sleep(self.delaybeforesend)
+ if self.logfile is not None:
+ self.logfile.write (s)
+ self.logfile.flush()
+ if self.logfile_send is not None:
+ self.logfile_send.write (s)
+ self.logfile_send.flush()
+ c = os.write(self.child_fd, s)
+ return c
+
+ def sendline(self, s=''):
+
+ """This is like send(), but it adds a line feed (os.linesep). This
+ returns the number of bytes written. """
+
+ n = self.send(s)
+ n = n + self.send (os.linesep)
+ return n
+
+ def sendcontrol(self, char):
+
+ """This sends a control character to the child such as Ctrl-C or
+ Ctrl-D. For example, to send a Ctrl-G (ASCII 7)::
+
+ child.sendcontrol('g')
+
+ See also, sendintr() and sendeof().
+ """
+
+ char = char.lower()
+ a = ord(char)
+ if a>=97 and a<=122:
+ a = a - ord('a') + 1
+ return self.send (chr(a))
+ d = {'@':0, '`':0,
+ '[':27, '{':27,
+ '\\':28, '|':28,
+ ']':29, '}': 29,
+ '^':30, '~':30,
+ '_':31,
+ '?':127}
+ if char not in d:
+ return 0
+ return self.send (chr(d[char]))
+
+ def sendeof(self):
+
+ """This sends an EOF to the child. This sends a character which causes
+ the pending parent output buffer to be sent to the waiting child
+ program without waiting for end-of-line. If it is the first character
+ of the line, the read() in the user program returns 0, which signifies
+ end-of-file. This means to work as expected a sendeof() has to be
+ called at the beginning of a line. This method does not send a newline.
+ It is the responsibility of the caller to ensure the eof is sent at the
+ beginning of a line. """
+
+ ### Hmmm... how do I send an EOF?
+ ###C if ((m = write(pty, *buf, p - *buf)) < 0)
+ ###C return (errno == EWOULDBLOCK) ? n : -1;
+ #fd = sys.stdin.fileno()
+ #old = termios.tcgetattr(fd) # remember current state
+ #attr = termios.tcgetattr(fd)
+ #attr[3] = attr[3] | termios.ICANON # ICANON must be set to recognize EOF
+ #try: # use try/finally to ensure state gets restored
+ # termios.tcsetattr(fd, termios.TCSADRAIN, attr)
+ # if hasattr(termios, 'CEOF'):
+ # os.write (self.child_fd, '%c' % termios.CEOF)
+ # else:
+ # # Silly platform does not define CEOF so assume CTRL-D
+ # os.write (self.child_fd, '%c' % 4)
+ #finally: # restore state
+ # termios.tcsetattr(fd, termios.TCSADRAIN, old)
+ if hasattr(termios, 'VEOF'):
+ char = termios.tcgetattr(self.child_fd)[6][termios.VEOF]
+ else:
+ # platform does not define VEOF so assume CTRL-D
+ char = chr(4)
+ self.send(char)
+
+ def sendintr(self):
+
+ """This sends a SIGINT to the child. It does not require
+ the SIGINT to be the first character on a line. """
+
+ if hasattr(termios, 'VINTR'):
+ char = termios.tcgetattr(self.child_fd)[6][termios.VINTR]
+ else:
+ # platform does not define VINTR so assume CTRL-C
+ char = chr(3)
+ self.send (char)
+
+ def eof (self):
+
+ """This returns True if the EOF exception was ever raised.
+ """
+
+ return self.flag_eof
+
+ def terminate(self, force=False):
+
+ """This forces a child process to terminate. It starts nicely with
+ SIGHUP and SIGINT. If "force" is True then moves onto SIGKILL. This
+ returns True if the child was terminated. This returns False if the
+ child could not be terminated. """
+
+ if not self.isalive():
+ return True
+ try:
+ self.kill(signal.SIGHUP)
+ time.sleep(self.delayafterterminate)
+ if not self.isalive():
+ return True
+ self.kill(signal.SIGCONT)
+ time.sleep(self.delayafterterminate)
+ if not self.isalive():
+ return True
+ self.kill(signal.SIGINT)
+ time.sleep(self.delayafterterminate)
+ if not self.isalive():
+ return True
+ if force:
+ self.kill(signal.SIGKILL)
+ time.sleep(self.delayafterterminate)
+ if not self.isalive():
+ return True
+ else:
+ return False
+ return False
+ except OSError, e:
+ # I think there are kernel timing issues that sometimes cause
+ # this to happen. I think isalive() reports True, but the
+ # process is dead to the kernel.
+ # Make one last attempt to see if the kernel is up to date.
+ time.sleep(self.delayafterterminate)
+ if not self.isalive():
+ return True
+ else:
+ return False
+
+ def wait(self):
+
+ """This waits until the child exits. This is a blocking call. This will
+ not read any data from the child, so this will block forever if the
+ child has unread output and has terminated. In other words, the child
+ may have printed output then called exit(); but, technically, the child
+ is still alive until its output is read. """
+
+ if self.isalive():
+ pid, status = os.waitpid(self.pid, 0)
+ else:
+ raise ExceptionPexpect ('Cannot wait for dead child process.')
+ self.exitstatus = os.WEXITSTATUS(status)
+ if os.WIFEXITED (status):
+ self.status = status
+ self.exitstatus = os.WEXITSTATUS(status)
+ self.signalstatus = None
+ self.terminated = True
+ elif os.WIFSIGNALED (status):
+ self.status = status
+ self.exitstatus = None
+ self.signalstatus = os.WTERMSIG(status)
+ self.terminated = True
+ elif os.WIFSTOPPED (status):
+ raise ExceptionPexpect ('Wait was called for a child process that is stopped. This is not supported. Is some other process attempting job control with our child pid?')
+ return self.exitstatus
+
+ def isalive(self):
+
+ """This tests if the child process is running or not. This is
+ non-blocking. If the child was terminated then this will read the
+ exitstatus or signalstatus of the child. This returns True if the child
+ process appears to be running or False if not. It can take literally
+ SECONDS for Solaris to return the right status. """
+
+ if self.terminated:
+ return False
+
+ if self.flag_eof:
+ # This is for Linux, which requires the blocking form of waitpid to get
+ # status of a defunct process. This is super-lame. The flag_eof would have
+ # been set in read_nonblocking(), so this should be safe.
+ waitpid_options = 0
+ else:
+ waitpid_options = os.WNOHANG
+
+ try:
+ pid, status = os.waitpid(self.pid, waitpid_options)
+ except OSError, e: # No child processes
+ if e[0] == errno.ECHILD:
+ raise ExceptionPexpect ('isalive() encountered condition where "terminated" is 0, but there was no child process. Did someone else call waitpid() on our process?')
+ else:
+ raise e
+
+ # I have to do this twice for Solaris. I can't even believe that I figured this out...
+ # If waitpid() returns 0 it means that no child process wishes to
+ # report, and the value of status is undefined.
+ if pid == 0:
+ try:
+ pid, status = os.waitpid(self.pid, waitpid_options) ### os.WNOHANG) # Solaris!
+ except OSError, e: # This should never happen...
+ if e[0] == errno.ECHILD:
+ raise ExceptionPexpect ('isalive() encountered condition that should never happen. There was no child process. Did someone else call waitpid() on our process?')
+ else:
+ raise e
+
+ # If pid is still 0 after two calls to waitpid() then
+ # the process really is alive. This seems to work on all platforms, except
+ # for Irix which seems to require a blocking call on waitpid or select, so I let read_nonblocking
+ # take care of this situation (unfortunately, this requires waiting through the timeout).
+ if pid == 0:
+ return True
+
+ if pid == 0:
+ return True
+
+ if os.WIFEXITED (status):
+ self.status = status
+ self.exitstatus = os.WEXITSTATUS(status)
+ self.signalstatus = None
+ self.terminated = True
+ elif os.WIFSIGNALED (status):
+ self.status = status
+ self.exitstatus = None
+ self.signalstatus = os.WTERMSIG(status)
+ self.terminated = True
+ elif os.WIFSTOPPED (status):
+ raise ExceptionPexpect ('isalive() encountered condition where child process is stopped. This is not supported. Is some other process attempting job control with our child pid?')
+ return False
+
+ def kill(self, sig):
+
+ """This sends the given signal to the child application. In keeping
+ with UNIX tradition it has a misleading name. It does not necessarily
+ kill the child unless you send the right signal. """
+
+ # Same as os.kill, but the pid is given for you.
+ if self.isalive():
+ os.kill(self.pid, sig)
+
+ def compile_pattern_list(self, patterns):
+
+ """This compiles a pattern-string or a list of pattern-strings.
+ Patterns must be a StringType, EOF, TIMEOUT, SRE_Pattern, or a list of
+ those. Patterns may also be None which results in an empty list (you
+ might do this if waiting for an EOF or TIMEOUT condition without
+ expecting any pattern).
+
+ This is used by expect() when calling expect_list(). Thus expect() is
+ nothing more than::
+
+ cpl = self.compile_pattern_list(pl)
+ return self.expect_list(cpl, timeout)
+
+ If you are using expect() within a loop it may be more
+ efficient to compile the patterns first and then call expect_list().
+ This avoid calls in a loop to compile_pattern_list()::
+
+ cpl = self.compile_pattern_list(my_pattern)
+ while some_condition:
+ ...
+ i = self.expect_list(clp, timeout)
+ ...
+ """
+
+ if patterns is None:
+ return []
+ if type(patterns) is not types.ListType:
+ patterns = [patterns]
+
+ compile_flags = re.DOTALL # Allow dot to match \n
+ if self.ignorecase:
+ compile_flags = compile_flags | re.IGNORECASE
+ compiled_pattern_list = []
+ for p in patterns:
+ if type(p) in types.StringTypes:
+ compiled_pattern_list.append(re.compile(p, compile_flags))
+ elif p is EOF:
+ compiled_pattern_list.append(EOF)
+ elif p is TIMEOUT:
+ compiled_pattern_list.append(TIMEOUT)
+ elif type(p) is type(re.compile('')):
+ compiled_pattern_list.append(p)
+ else:
+ raise TypeError ('Argument must be one of StringTypes, EOF, TIMEOUT, SRE_Pattern, or a list of those type. %s' % str(type(p)))
+
+ return compiled_pattern_list
+
+ def expect(self, pattern, timeout = -1, searchwindowsize=-1):
+
+ """This seeks through the stream until a pattern is matched. The
+ pattern is overloaded and may take several types. The pattern can be a
+ StringType, EOF, a compiled re, or a list of any of those types.
+ Strings will be compiled to re types. This returns the index into the
+ pattern list. If the pattern was not a list this returns index 0 on a
+ successful match. This may raise exceptions for EOF or TIMEOUT. To
+ avoid the EOF or TIMEOUT exceptions add EOF or TIMEOUT to the pattern
+ list. That will cause expect to match an EOF or TIMEOUT condition
+ instead of raising an exception.
+
+ If you pass a list of patterns and more than one matches, the first match
+ in the stream is chosen. If more than one pattern matches at that point,
+ the leftmost in the pattern list is chosen. For example::
+
+ # the input is 'foobar'
+ index = p.expect (['bar', 'foo', 'foobar'])
+ # returns 1 ('foo') even though 'foobar' is a "better" match
+
+ Please note, however, that buffering can affect this behavior, since
+ input arrives in unpredictable chunks. For example::
+
+ # the input is 'foobar'
+ index = p.expect (['foobar', 'foo'])
+ # returns 0 ('foobar') if all input is available at once,
+ # but returs 1 ('foo') if parts of the final 'bar' arrive late
+
+ After a match is found the instance attributes 'before', 'after' and
+ 'match' will be set. You can see all the data read before the match in
+ 'before'. You can see the data that was matched in 'after'. The
+ re.MatchObject used in the re match will be in 'match'. If an error
+ occurred then 'before' will be set to all the data read so far and
+ 'after' and 'match' will be None.
+
+ If timeout is -1 then timeout will be set to the self.timeout value.
+
+ A list entry may be EOF or TIMEOUT instead of a string. This will
+ catch these exceptions and return the index of the list entry instead
+ of raising the exception. The attribute 'after' will be set to the
+ exception type. The attribute 'match' will be None. This allows you to
+ write code like this::
+
+ index = p.expect (['good', 'bad', pexpect.EOF, pexpect.TIMEOUT])
+ if index == 0:
+ do_something()
+ elif index == 1:
+ do_something_else()
+ elif index == 2:
+ do_some_other_thing()
+ elif index == 3:
+ do_something_completely_different()
+
+ instead of code like this::
+
+ try:
+ index = p.expect (['good', 'bad'])
+ if index == 0:
+ do_something()
+ elif index == 1:
+ do_something_else()
+ except EOF:
+ do_some_other_thing()
+ except TIMEOUT:
+ do_something_completely_different()
+
+ These two forms are equivalent. It all depends on what you want. You
+ can also just expect the EOF if you are waiting for all output of a
+ child to finish. For example::
+
+ p = pexpect.spawn('/bin/ls')
+ p.expect (pexpect.EOF)
+ print p.before
+
+ If you are trying to optimize for speed then see expect_list().
+ """
+
+ compiled_pattern_list = self.compile_pattern_list(pattern)
+ return self.expect_list(compiled_pattern_list, timeout, searchwindowsize)
+
+ def expect_list(self, pattern_list, timeout = -1, searchwindowsize = -1):
+
+ """This takes a list of compiled regular expressions and returns the
+ index into the pattern_list that matched the child output. The list may
+ also contain EOF or TIMEOUT (which are not compiled regular
+ expressions). This method is similar to the expect() method except that
+ expect_list() does not recompile the pattern list on every call. This
+ may help if you are trying to optimize for speed, otherwise just use
+ the expect() method. This is called by expect(). If timeout==-1 then
+ the self.timeout value is used. If searchwindowsize==-1 then the
+ self.searchwindowsize value is used. """
+
+ return self.expect_loop(searcher_re(pattern_list), timeout, searchwindowsize)
+
+ def expect_exact(self, pattern_list, timeout = -1, searchwindowsize = -1):
+
+ """This is similar to expect(), but uses plain string matching instead
+ of compiled regular expressions in 'pattern_list'. The 'pattern_list'
+ may be a string; a list or other sequence of strings; or TIMEOUT and
+ EOF.
+
+ This call might be faster than expect() for two reasons: string
+ searching is faster than RE matching and it is possible to limit the
+ search to just the end of the input buffer.
+
+ This method is also useful when you don't want to have to worry about
+ escaping regular expression characters that you want to match."""
+
+ if type(pattern_list) in types.StringTypes or pattern_list in (TIMEOUT, EOF):
+ pattern_list = [pattern_list]
+ return self.expect_loop(searcher_string(pattern_list), timeout, searchwindowsize)
+
+ def expect_loop(self, searcher, timeout = -1, searchwindowsize = -1):
+
+ """This is the common loop used inside expect. The 'searcher' should be
+ an instance of searcher_re or searcher_string, which describes how and what
+ to search for in the input.
+
+ See expect() for other arguments, return value and exceptions. """
+
+ self.searcher = searcher
+
+ if timeout == -1:
+ timeout = self.timeout
+ if timeout is not None:
+ end_time = time.time() + timeout
+ if searchwindowsize == -1:
+ searchwindowsize = self.searchwindowsize
+
+ try:
+ incoming = self.buffer
+ freshlen = len(incoming)
+ while True: # Keep reading until exception or return.
+ index = searcher.search(incoming, freshlen, searchwindowsize)
+ if index >= 0:
+ self.buffer = incoming[searcher.end : ]
+ self.before = incoming[ : searcher.start]
+ self.after = incoming[searcher.start : searcher.end]
+ self.match = searcher.match
+ self.match_index = index
+ return self.match_index
+ # No match at this point
+ if timeout < 0 and timeout is not None:
+ raise TIMEOUT ('Timeout exceeded in expect_any().')
+ # Still have time left, so read more data
+ c = self.read_nonblocking (self.maxread, timeout)
+ freshlen = len(c)
+ time.sleep (0.0001)
+ incoming = incoming + c
+ if timeout is not None:
+ timeout = end_time - time.time()
+ except EOF, e:
+ self.buffer = ''
+ self.before = incoming
+ self.after = EOF
+ index = searcher.eof_index
+ if index >= 0:
+ self.match = EOF
+ self.match_index = index
+ return self.match_index
+ else:
+ self.match = None
+ self.match_index = None
+ raise EOF (str(e) + '\n' + str(self))
+ except TIMEOUT, e:
+ self.buffer = incoming
+ self.before = incoming
+ self.after = TIMEOUT
+ index = searcher.timeout_index
+ if index >= 0:
+ self.match = TIMEOUT
+ self.match_index = index
+ return self.match_index
+ else:
+ self.match = None
+ self.match_index = None
+ raise TIMEOUT (str(e) + '\n' + str(self))
+ except:
+ self.before = incoming
+ self.after = None
+ self.match = None
+ self.match_index = None
+ raise
+
+ def getwinsize(self):
+
+ """This returns the terminal window size of the child tty. The return
+ value is a tuple of (rows, cols). """
+
+ TIOCGWINSZ = getattr(termios, 'TIOCGWINSZ', 1074295912L)
+ s = struct.pack('HHHH', 0, 0, 0, 0)
+ x = fcntl.ioctl(self.fileno(), TIOCGWINSZ, s)
+ return struct.unpack('HHHH', x)[0:2]
+
+ def setwinsize(self, r, c):
+
+ """This sets the terminal window size of the child tty. This will cause
+ a SIGWINCH signal to be sent to the child. This does not change the
+ physical window size. It changes the size reported to TTY-aware
+ applications like vi or curses -- applications that respond to the
+ SIGWINCH signal. """
+
+ # Check for buggy platforms. Some Python versions on some platforms
+ # (notably OSF1 Alpha and RedHat 7.1) truncate the value for
+ # termios.TIOCSWINSZ. It is not clear why this happens.
+ # These platforms don't seem to handle the signed int very well;
+ # yet other platforms like OpenBSD have a large negative value for
+ # TIOCSWINSZ and they don't have a truncate problem.
+ # Newer versions of Linux have totally different values for TIOCSWINSZ.
+ # Note that this fix is a hack.
+ TIOCSWINSZ = getattr(termios, 'TIOCSWINSZ', -2146929561)
+ if TIOCSWINSZ == 2148037735L: # L is not required in Python >= 2.2.
+ TIOCSWINSZ = -2146929561 # Same bits, but with sign.
+ # Note, assume ws_xpixel and ws_ypixel are zero.
+ s = struct.pack('HHHH', r, c, 0, 0)
+ fcntl.ioctl(self.fileno(), TIOCSWINSZ, s)
+
+ def interact(self, escape_character = chr(29), input_filter = None, output_filter = None):
+
+ """This gives control of the child process to the interactive user (the
+ human at the keyboard). Keystrokes are sent to the child process, and
+ the stdout and stderr output of the child process is printed. This
+ simply echos the child stdout and child stderr to the real stdout and
+ it echos the real stdin to the child stdin. When the user types the
+ escape_character this method will stop. The default for
+ escape_character is ^]. This should not be confused with ASCII 27 --
+ the ESC character. ASCII 29 was chosen for historical merit because
+ this is the character used by 'telnet' as the escape character. The
+ escape_character will not be sent to the child process.
+
+ You may pass in optional input and output filter functions. These
+ functions should take a string and return a string. The output_filter
+ will be passed all the output from the child process. The input_filter
+ will be passed all the keyboard input from the user. The input_filter
+ is run BEFORE the check for the escape_character.
+
+ Note that if you change the window size of the parent the SIGWINCH
+ signal will not be passed through to the child. If you want the child
+ window size to change when the parent's window size changes then do
+ something like the following example::
+
+ import pexpect, struct, fcntl, termios, signal, sys
+ def sigwinch_passthrough (sig, data):
+ s = struct.pack("HHHH", 0, 0, 0, 0)
+ a = struct.unpack('hhhh', fcntl.ioctl(sys.stdout.fileno(), termios.TIOCGWINSZ , s))
+ global p
+ p.setwinsize(a[0],a[1])
+ p = pexpect.spawn('/bin/bash') # Note this is global and used in sigwinch_passthrough.
+ signal.signal(signal.SIGWINCH, sigwinch_passthrough)
+ p.interact()
+ """
+
+ # Flush the buffer.
+ self.stdout.write (self.buffer)
+ self.stdout.flush()
+ self.buffer = ''
+ mode = tty.tcgetattr(self.STDIN_FILENO)
+ tty.setraw(self.STDIN_FILENO)
+ try:
+ self.__interact_copy(escape_character, input_filter, output_filter)
+ finally:
+ tty.tcsetattr(self.STDIN_FILENO, tty.TCSAFLUSH, mode)
+
+ def __interact_writen(self, fd, data):
+
+ """This is used by the interact() method.
+ """
+
+ while data != '' and self.isalive():
+ n = os.write(fd, data)
+ data = data[n:]
+
+ def __interact_read(self, fd):
+
+ """This is used by the interact() method.
+ """
+
+ return os.read(fd, 1000)
+
+ def __interact_copy(self, escape_character = None, input_filter = None, output_filter = None):
+
+ """This is used by the interact() method.
+ """
+
+ while self.isalive():
+ r,w,e = self.__select([self.child_fd, self.STDIN_FILENO], [], [])
+ if self.child_fd in r:
+ data = self.__interact_read(self.child_fd)
+ if output_filter: data = output_filter(data)
+ if self.logfile is not None:
+ self.logfile.write (data)
+ self.logfile.flush()
+ os.write(self.STDOUT_FILENO, data)
+ if self.STDIN_FILENO in r:
+ data = self.__interact_read(self.STDIN_FILENO)
+ if input_filter: data = input_filter(data)
+ i = data.rfind(escape_character)
+ if i != -1:
+ data = data[:i]
+ self.__interact_writen(self.child_fd, data)
+ break
+ self.__interact_writen(self.child_fd, data)
+
+ def __select (self, iwtd, owtd, ewtd, timeout=None):
+
+ """This is a wrapper around select.select() that ignores signals. If
+ select.select raises a select.error exception and errno is an EINTR
+ error then it is ignored. Mainly this is used to ignore sigwinch
+ (terminal resize). """
+
+ # if select() is interrupted by a signal (errno==EINTR) then
+ # we loop back and enter the select() again.
+ if timeout is not None:
+ end_time = time.time() + timeout
+ while True:
+ try:
+ return select.select (iwtd, owtd, ewtd, timeout)
+ except select.error, e:
+ if e[0] == errno.EINTR:
+ # if we loop back we have to subtract the amount of time we already waited.
+ if timeout is not None:
+ timeout = end_time - time.time()
+ if timeout < 0:
+ return ([],[],[])
+ else: # something else caused the select.error, so this really is an exception
+ raise
+
+##############################################################################
+# The following methods are no longer supported or allowed.
+
+ def setmaxread (self, maxread):
+
+ """This method is no longer supported or allowed. I don't like getters
+ and setters without a good reason. """
+
+ raise ExceptionPexpect ('This method is no longer supported or allowed. Just assign a value to the maxread member variable.')
+
+ def setlog (self, fileobject):
+
+ """This method is no longer supported or allowed.
+ """
+
+ raise ExceptionPexpect ('This method is no longer supported or allowed. Just assign a value to the logfile member variable.')
+
+##############################################################################
+# End of spawn class
+##############################################################################
+
+class searcher_string (object):
+
+ """This is a plain string search helper for the spawn.expect_any() method.
+
+ Attributes:
+
+ eof_index - index of EOF, or -1
+ timeout_index - index of TIMEOUT, or -1
+
+ After a successful match by the search() method the following attributes
+ are available:
+
+ start - index into the buffer, first byte of match
+ end - index into the buffer, first byte after match
+ match - the matching string itself
+ """
+
+ def __init__(self, strings):
+
+ """This creates an instance of searcher_string. This argument 'strings'
+ may be a list; a sequence of strings; or the EOF or TIMEOUT types. """
+
+ self.eof_index = -1
+ self.timeout_index = -1
+ self._strings = []
+ for n, s in zip(range(len(strings)), strings):
+ if s is EOF:
+ self.eof_index = n
+ continue
+ if s is TIMEOUT:
+ self.timeout_index = n
+ continue
+ self._strings.append((n, s))
+
+ def __str__(self):
+
+ """This returns a human-readable string that represents the state of
+ the object."""
+
+ ss = [ (ns[0],' %d: "%s"' % ns) for ns in self._strings ]
+ ss.append((-1,'searcher_string:'))
+ if self.eof_index >= 0:
+ ss.append ((self.eof_index,' %d: EOF' % self.eof_index))
+ if self.timeout_index >= 0:
+ ss.append ((self.timeout_index,' %d: TIMEOUT' % self.timeout_index))
+ ss.sort()
+ ss = zip(*ss)[1]
+ return '\n'.join(ss)
+
+ def search(self, buffer, freshlen, searchwindowsize=None):
+
+ """This searches 'buffer' for the first occurence of one of the search
+ strings. 'freshlen' must indicate the number of bytes at the end of
+ 'buffer' which have not been searched before. It helps to avoid
+ searching the same, possibly big, buffer over and over again.
+
+ See class spawn for the 'searchwindowsize' argument.
+
+ If there is a match this returns the index of that string, and sets
+ 'start', 'end' and 'match'. Otherwise, this returns -1. """
+
+ absurd_match = len(buffer)
+ first_match = absurd_match
+
+ # 'freshlen' helps a lot here. Further optimizations could
+ # possibly include:
+ #
+ # using something like the Boyer-Moore Fast String Searching
+ # Algorithm; pre-compiling the search through a list of
+ # strings into something that can scan the input once to
+ # search for all N strings; realize that if we search for
+ # ['bar', 'baz'] and the input is '...foo' we need not bother
+ # rescanning until we've read three more bytes.
+ #
+ # Sadly, I don't know enough about this interesting topic. /grahn
+
+ for index, s in self._strings:
+ if searchwindowsize is None:
+ # the match, if any, can only be in the fresh data,
+ # or at the very end of the old data
+ offset = -(freshlen+len(s))
+ else:
+ # better obey searchwindowsize
+ offset = -searchwindowsize
+ n = buffer.find(s, offset)
+ if n >= 0 and n < first_match:
+ first_match = n
+ best_index, best_match = index, s
+ if first_match == absurd_match:
+ return -1
+ self.match = best_match
+ self.start = first_match
+ self.end = self.start + len(self.match)
+ return best_index
+
+class searcher_re (object):
+
+ """This is regular expression string search helper for the
+ spawn.expect_any() method.
+
+ Attributes:
+
+ eof_index - index of EOF, or -1
+ timeout_index - index of TIMEOUT, or -1
+
+ After a successful match by the search() method the following attributes
+ are available:
+
+ start - index into the buffer, first byte of match
+ end - index into the buffer, first byte after match
+ match - the re.match object returned by a succesful re.search
+
+ """
+
+ def __init__(self, patterns):
+
+ """This creates an instance that searches for 'patterns' Where
+ 'patterns' may be a list or other sequence of compiled regular
+ expressions, or the EOF or TIMEOUT types."""
+
+ self.eof_index = -1
+ self.timeout_index = -1
+ self._searches = []
+ for n, s in zip(range(len(patterns)), patterns):
+ if s is EOF:
+ self.eof_index = n
+ continue
+ if s is TIMEOUT:
+ self.timeout_index = n
+ continue
+ self._searches.append((n, s))
+
+ def __str__(self):
+
+ """This returns a human-readable string that represents the state of
+ the object."""
+
+ ss = [ (n,' %d: re.compile("%s")' % (n,str(s.pattern))) for n,s in self._searches]
+ ss.append((-1,'searcher_re:'))
+ if self.eof_index >= 0:
+ ss.append ((self.eof_index,' %d: EOF' % self.eof_index))
+ if self.timeout_index >= 0:
+ ss.append ((self.timeout_index,' %d: TIMEOUT' % self.timeout_index))
+ ss.sort()
+ ss = zip(*ss)[1]
+ return '\n'.join(ss)
+
+ def search(self, buffer, freshlen, searchwindowsize=None):
+
+ """This searches 'buffer' for the first occurence of one of the regular
+ expressions. 'freshlen' must indicate the number of bytes at the end of
+ 'buffer' which have not been searched before.
+
+ See class spawn for the 'searchwindowsize' argument.
+
+ If there is a match this returns the index of that string, and sets
+ 'start', 'end' and 'match'. Otherwise, returns -1."""
+
+ absurd_match = len(buffer)
+ first_match = absurd_match
+ # 'freshlen' doesn't help here -- we cannot predict the
+ # length of a match, and the re module provides no help.
+ if searchwindowsize is None:
+ searchstart = 0
+ else:
+ searchstart = max(0, len(buffer)-searchwindowsize)
+ for index, s in self._searches:
+ match = s.search(buffer, searchstart)
+ if match is None:
+ continue
+ n = match.start()
+ if n < first_match:
+ first_match = n
+ the_match = match
+ best_index = index
+ if first_match == absurd_match:
+ return -1
+ self.start = first_match
+ self.match = the_match
+ self.end = self.match.end()
+ return best_index
+
+def which (filename):
+
+ """This takes a given filename; tries to find it in the environment path;
+ then checks if it is executable. This returns the full path to the filename
+ if found and executable. Otherwise this returns None."""
+
+ # Special case where filename already contains a path.
+ if os.path.dirname(filename) != '':
+ if os.access (filename, os.X_OK):
+ return filename
+
+ if not os.environ.has_key('PATH') or os.environ['PATH'] == '':
+ p = os.defpath
+ else:
+ p = os.environ['PATH']
+
+ # Oddly enough this was the one line that made Pexpect
+ # incompatible with Python 1.5.2.
+ #pathlist = p.split (os.pathsep)
+ pathlist = string.split (p, os.pathsep)
+
+ for path in pathlist:
+ f = os.path.join(path, filename)
+ if os.access(f, os.X_OK):
+ return f
+ return None
+
+def split_command_line(command_line):
+
+ """This splits a command line into a list of arguments. It splits arguments
+ on spaces, but handles embedded quotes, doublequotes, and escaped
+ characters. It's impossible to do this with a regular expression, so I
+ wrote a little state machine to parse the command line. """
+
+ arg_list = []
+ arg = ''
+
+ # Constants to name the states we can be in.
+ state_basic = 0
+ state_esc = 1
+ state_singlequote = 2
+ state_doublequote = 3
+ state_whitespace = 4 # The state of consuming whitespace between commands.
+ state = state_basic
+
+ for c in command_line:
+ if state == state_basic or state == state_whitespace:
+ if c == '\\': # Escape the next character
+ state = state_esc
+ elif c == r"'": # Handle single quote
+ state = state_singlequote
+ elif c == r'"': # Handle double quote
+ state = state_doublequote
+ elif c.isspace():
+ # Add arg to arg_list if we aren't in the middle of whitespace.
+ if state == state_whitespace:
+ None # Do nothing.
+ else:
+ arg_list.append(arg)
+ arg = ''
+ state = state_whitespace
+ else:
+ arg = arg + c
+ state = state_basic
+ elif state == state_esc:
+ arg = arg + c
+ state = state_basic
+ elif state == state_singlequote:
+ if c == r"'":
+ state = state_basic
+ else:
+ arg = arg + c
+ elif state == state_doublequote:
+ if c == r'"':
+ state = state_basic
+ else:
+ arg = arg + c
+
+ if arg != '':
+ arg_list.append(arg)
+ return arg_list
+
+# vi:ts=4:sw=4:expandtab:ft=python:
Added: lldb/trunk/test/pexpect-2.4/pxssh.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/pxssh.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/pxssh.py (added)
+++ lldb/trunk/test/pexpect-2.4/pxssh.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,311 @@
+"""This class extends pexpect.spawn to specialize setting up SSH connections.
+This adds methods for login, logout, and expecting the shell prompt.
+
+$Id: pxssh.py 513 2008-02-09 18:26:13Z noah $
+"""
+
+from pexpect import *
+import pexpect
+import time
+
+__all__ = ['ExceptionPxssh', 'pxssh']
+
+# Exception classes used by this module.
+class ExceptionPxssh(ExceptionPexpect):
+ """Raised for pxssh exceptions.
+ """
+
+class pxssh (spawn):
+
+ """This class extends pexpect.spawn to specialize setting up SSH
+ connections. This adds methods for login, logout, and expecting the shell
+ prompt. It does various tricky things to handle many situations in the SSH
+ login process. For example, if the session is your first login, then pxssh
+ automatically accepts the remote certificate; or if you have public key
+ authentication setup then pxssh won't wait for the password prompt.
+
+ pxssh uses the shell prompt to synchronize output from the remote host. In
+ order to make this more robust it sets the shell prompt to something more
+ unique than just $ or #. This should work on most Borne/Bash or Csh style
+ shells.
+
+ Example that runs a few commands on a remote server and prints the result::
+
+ import pxssh
+ import getpass
+ try:
+ s = pxssh.pxssh()
+ hostname = raw_input('hostname: ')
+ username = raw_input('username: ')
+ password = getpass.getpass('password: ')
+ s.login (hostname, username, password)
+ s.sendline ('uptime') # run a command
+ s.prompt() # match the prompt
+ print s.before # print everything before the prompt.
+ s.sendline ('ls -l')
+ s.prompt()
+ print s.before
+ s.sendline ('df')
+ s.prompt()
+ print s.before
+ s.logout()
+ except pxssh.ExceptionPxssh, e:
+ print "pxssh failed on login."
+ print str(e)
+
+ Note that if you have ssh-agent running while doing development with pxssh
+ then this can lead to a lot of confusion. Many X display managers (xdm,
+ gdm, kdm, etc.) will automatically start a GUI agent. You may see a GUI
+ dialog box popup asking for a password during development. You should turn
+ off any key agents during testing. The 'force_password' attribute will turn
+ off public key authentication. This will only work if the remote SSH server
+ is configured to allow password logins. Example of using 'force_password'
+ attribute::
+
+ s = pxssh.pxssh()
+ s.force_password = True
+ hostname = raw_input('hostname: ')
+ username = raw_input('username: ')
+ password = getpass.getpass('password: ')
+ s.login (hostname, username, password)
+ """
+
+ def __init__ (self, timeout=30, maxread=2000, searchwindowsize=None, logfile=None, cwd=None, env=None):
+ spawn.__init__(self, None, timeout=timeout, maxread=maxread, searchwindowsize=searchwindowsize, logfile=logfile, cwd=cwd, env=env)
+
+ self.name = '<pxssh>'
+
+ #SUBTLE HACK ALERT! Note that the command to set the prompt uses a
+ #slightly different string than the regular expression to match it. This
+ #is because when you set the prompt the command will echo back, but we
+ #don't want to match the echoed command. So if we make the set command
+ #slightly different than the regex we eliminate the problem. To make the
+ #set command different we add a backslash in front of $. The $ doesn't
+ #need to be escaped, but it doesn't hurt and serves to make the set
+ #prompt command different than the regex.
+
+ # used to match the command-line prompt
+ self.UNIQUE_PROMPT = "\[PEXPECT\][\$\#] "
+ self.PROMPT = self.UNIQUE_PROMPT
+
+ # used to set shell command-line prompt to UNIQUE_PROMPT.
+ self.PROMPT_SET_SH = "PS1='[PEXPECT]\$ '"
+ self.PROMPT_SET_CSH = "set prompt='[PEXPECT]\$ '"
+ self.SSH_OPTS = "-o'RSAAuthentication=no' -o 'PubkeyAuthentication=no'"
+ # Disabling X11 forwarding gets rid of the annoying SSH_ASKPASS from
+ # displaying a GUI password dialog. I have not figured out how to
+ # disable only SSH_ASKPASS without also disabling X11 forwarding.
+ # Unsetting SSH_ASKPASS on the remote side doesn't disable it! Annoying!
+ #self.SSH_OPTS = "-x -o'RSAAuthentication=no' -o 'PubkeyAuthentication=no'"
+ self.force_password = False
+ self.auto_prompt_reset = True
+
+ def levenshtein_distance(self, a,b):
+
+ """This calculates the Levenshtein distance between a and b.
+ """
+
+ n, m = len(a), len(b)
+ if n > m:
+ a,b = b,a
+ n,m = m,n
+ current = range(n+1)
+ for i in range(1,m+1):
+ previous, current = current, [i]+[0]*n
+ for j in range(1,n+1):
+ add, delete = previous[j]+1, current[j-1]+1
+ change = previous[j-1]
+ if a[j-1] != b[i-1]:
+ change = change + 1
+ current[j] = min(add, delete, change)
+ return current[n]
+
+ def sync_original_prompt (self):
+
+ """This attempts to find the prompt. Basically, press enter and record
+ the response; press enter again and record the response; if the two
+ responses are similar then assume we are at the original prompt. This
+ is a slow function. It can take over 10 seconds. """
+
+ # All of these timing pace values are magic.
+ # I came up with these based on what seemed reliable for
+ # connecting to a heavily loaded machine I have.
+ # If latency is worse than these values then this will fail.
+
+ try:
+ self.read_nonblocking(size=10000,timeout=1) # GAS: Clear out the cache before getting the prompt
+ except TIMEOUT:
+ pass
+ time.sleep(0.1)
+ self.sendline()
+ time.sleep(0.5)
+ x = self.read_nonblocking(size=1000,timeout=1)
+ time.sleep(0.1)
+ self.sendline()
+ time.sleep(0.5)
+ a = self.read_nonblocking(size=1000,timeout=1)
+ time.sleep(0.1)
+ self.sendline()
+ time.sleep(0.5)
+ b = self.read_nonblocking(size=1000,timeout=1)
+ ld = self.levenshtein_distance(a,b)
+ len_a = len(a)
+ if len_a == 0:
+ return False
+ if float(ld)/len_a < 0.4:
+ return True
+ return False
+
+ ### TODO: This is getting messy and I'm pretty sure this isn't perfect.
+ ### TODO: I need to draw a flow chart for this.
+ def login (self,server,username,password='',terminal_type='ansi',original_prompt=r"[#$]",login_timeout=10,port=None,auto_prompt_reset=True):
+
+ """This logs the user into the given server. It uses the
+ 'original_prompt' to try to find the prompt right after login. When it
+ finds the prompt it immediately tries to reset the prompt to something
+ more easily matched. The default 'original_prompt' is very optimistic
+ and is easily fooled. It's more reliable to try to match the original
+ prompt as exactly as possible to prevent false matches by server
+ strings such as the "Message Of The Day". On many systems you can
+ disable the MOTD on the remote server by creating a zero-length file
+ called "~/.hushlogin" on the remote server. If a prompt cannot be found
+ then this will not necessarily cause the login to fail. In the case of
+ a timeout when looking for the prompt we assume that the original
+ prompt was so weird that we could not match it, so we use a few tricks
+ to guess when we have reached the prompt. Then we hope for the best and
+ blindly try to reset the prompt to something more unique. If that fails
+ then login() raises an ExceptionPxssh exception.
+
+ In some situations it is not possible or desirable to reset the
+ original prompt. In this case, set 'auto_prompt_reset' to False to
+ inhibit setting the prompt to the UNIQUE_PROMPT. Remember that pxssh
+ uses a unique prompt in the prompt() method. If the original prompt is
+ not reset then this will disable the prompt() method unless you
+ manually set the PROMPT attribute. """
+
+ ssh_options = '-q'
+ if self.force_password:
+ ssh_options = ssh_options + ' ' + self.SSH_OPTS
+ if port is not None:
+ ssh_options = ssh_options + ' -p %s'%(str(port))
+ cmd = "ssh %s -l %s %s" % (ssh_options, username, server)
+
+ # This does not distinguish between a remote server 'password' prompt
+ # and a local ssh 'passphrase' prompt (for unlocking a private key).
+ spawn._spawn(self, cmd)
+ i = self.expect(["(?i)are you sure you want to continue connecting", original_prompt, "(?i)(?:password)|(?:passphrase for key)", "(?i)permission denied", "(?i)terminal type", TIMEOUT, "(?i)connection closed by remote host"], timeout=login_timeout)
+
+ # First phase
+ if i==0:
+ # New certificate -- always accept it.
+ # This is what you get if SSH does not have the remote host's
+ # public key stored in the 'known_hosts' cache.
+ self.sendline("yes")
+ i = self.expect(["(?i)are you sure you want to continue connecting", original_prompt, "(?i)(?:password)|(?:passphrase for key)", "(?i)permission denied", "(?i)terminal type", TIMEOUT])
+ if i==2: # password or passphrase
+ self.sendline(password)
+ i = self.expect(["(?i)are you sure you want to continue connecting", original_prompt, "(?i)(?:password)|(?:passphrase for key)", "(?i)permission denied", "(?i)terminal type", TIMEOUT])
+ if i==4:
+ self.sendline(terminal_type)
+ i = self.expect(["(?i)are you sure you want to continue connecting", original_prompt, "(?i)(?:password)|(?:passphrase for key)", "(?i)permission denied", "(?i)terminal type", TIMEOUT])
+
+ # Second phase
+ if i==0:
+ # This is weird. This should not happen twice in a row.
+ self.close()
+ raise ExceptionPxssh ('Weird error. Got "are you sure" prompt twice.')
+ elif i==1: # can occur if you have a public key pair set to authenticate.
+ ### TODO: May NOT be OK if expect() got tricked and matched a false prompt.
+ pass
+ elif i==2: # password prompt again
+ # For incorrect passwords, some ssh servers will
+ # ask for the password again, others return 'denied' right away.
+ # If we get the password prompt again then this means
+ # we didn't get the password right the first time.
+ self.close()
+ raise ExceptionPxssh ('password refused')
+ elif i==3: # permission denied -- password was bad.
+ self.close()
+ raise ExceptionPxssh ('permission denied')
+ elif i==4: # terminal type again? WTF?
+ self.close()
+ raise ExceptionPxssh ('Weird error. Got "terminal type" prompt twice.')
+ elif i==5: # Timeout
+ #This is tricky... I presume that we are at the command-line prompt.
+ #It may be that the shell prompt was so weird that we couldn't match
+ #it. Or it may be that we couldn't log in for some other reason. I
+ #can't be sure, but it's safe to guess that we did login because if
+ #I presume wrong and we are not logged in then this should be caught
+ #later when I try to set the shell prompt.
+ pass
+ elif i==6: # Connection closed by remote host
+ self.close()
+ raise ExceptionPxssh ('connection closed')
+ else: # Unexpected
+ self.close()
+ raise ExceptionPxssh ('unexpected login response')
+ if not self.sync_original_prompt():
+ self.close()
+ raise ExceptionPxssh ('could not synchronize with original prompt')
+ # We appear to be in.
+ # set shell prompt to something unique.
+ if auto_prompt_reset:
+ if not self.set_unique_prompt():
+ self.close()
+ raise ExceptionPxssh ('could not set shell prompt\n'+self.before)
+ return True
+
+ def logout (self):
+
+ """This sends exit to the remote shell. If there are stopped jobs then
+ this automatically sends exit twice. """
+
+ self.sendline("exit")
+ index = self.expect([EOF, "(?i)there are stopped jobs"])
+ if index==1:
+ self.sendline("exit")
+ self.expect(EOF)
+ self.close()
+
+ def prompt (self, timeout=20):
+
+ """This matches the shell prompt. This is little more than a short-cut
+ to the expect() method. This returns True if the shell prompt was
+ matched. This returns False if there was a timeout. Note that if you
+ called login() with auto_prompt_reset set to False then you should have
+ manually set the PROMPT attribute to a regex pattern for matching the
+ prompt. """
+
+ i = self.expect([self.PROMPT, TIMEOUT], timeout=timeout)
+ if i==1:
+ return False
+ return True
+
+ def set_unique_prompt (self):
+
+ """This sets the remote prompt to something more unique than # or $.
+ This makes it easier for the prompt() method to match the shell prompt
+ unambiguously. This method is called automatically by the login()
+ method, but you may want to call it manually if you somehow reset the
+ shell prompt. For example, if you 'su' to a different user then you
+ will need to manually reset the prompt. This sends shell commands to
+ the remote host to set the prompt, so this assumes the remote host is
+ ready to receive commands.
+
+ Alternatively, you may use your own prompt pattern. Just set the PROMPT
+ attribute to a regular expression that matches it. In this case you
+ should call login() with auto_prompt_reset=False; then set the PROMPT
+ attribute. After that the prompt() method will try to match your prompt
+ pattern."""
+
+ self.sendline ("unset PROMPT_COMMAND")
+ self.sendline (self.PROMPT_SET_SH) # sh-style
+ i = self.expect ([TIMEOUT, self.PROMPT], timeout=10)
+ if i == 0: # csh-style
+ self.sendline (self.PROMPT_SET_CSH)
+ i = self.expect ([TIMEOUT, self.PROMPT], timeout=10)
+ if i == 0:
+ return False
+ return True
+
+# vi:ts=4:sw=4:expandtab:ft=python:
Added: lldb/trunk/test/pexpect-2.4/screen.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/screen.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/screen.py (added)
+++ lldb/trunk/test/pexpect-2.4/screen.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,380 @@
+"""This implements a virtual screen. This is used to support ANSI terminal
+emulation. The screen representation and state is implemented in this class.
+Most of the methods are inspired by ANSI screen control codes. The ANSI class
+extends this class to add parsing of ANSI escape codes.
+
+$Id: screen.py 486 2007-07-13 01:04:16Z noah $
+"""
+
+import copy
+
+NUL = 0 # Fill character; ignored on input.
+ENQ = 5 # Transmit answerback message.
+BEL = 7 # Ring the bell.
+BS = 8 # Move cursor left.
+HT = 9 # Move cursor to next tab stop.
+LF = 10 # Line feed.
+VT = 11 # Same as LF.
+FF = 12 # Same as LF.
+CR = 13 # Move cursor to left margin or newline.
+SO = 14 # Invoke G1 character set.
+SI = 15 # Invoke G0 character set.
+XON = 17 # Resume transmission.
+XOFF = 19 # Halt transmission.
+CAN = 24 # Cancel escape sequence.
+SUB = 26 # Same as CAN.
+ESC = 27 # Introduce a control sequence.
+DEL = 127 # Fill character; ignored on input.
+SPACE = chr(32) # Space or blank character.
+
+def constrain (n, min, max):
+
+ """This returns a number, n constrained to the min and max bounds. """
+
+ if n < min:
+ return min
+ if n > max:
+ return max
+ return n
+
+class screen:
+
+ """This object maintains the state of a virtual text screen as a
+ rectangluar array. This maintains a virtual cursor position and handles
+ scrolling as characters are added. This supports most of the methods needed
+ by an ANSI text screen. Row and column indexes are 1-based (not zero-based,
+ like arrays). """
+
+ def __init__ (self, r=24,c=80):
+
+ """This initializes a blank scree of the given dimentions."""
+
+ self.rows = r
+ self.cols = c
+ self.cur_r = 1
+ self.cur_c = 1
+ self.cur_saved_r = 1
+ self.cur_saved_c = 1
+ self.scroll_row_start = 1
+ self.scroll_row_end = self.rows
+ self.w = [ [SPACE] * self.cols for c in range(self.rows)]
+
+ def __str__ (self):
+
+ """This returns a printable representation of the screen. The end of
+ each screen line is terminated by a newline. """
+
+ return '\n'.join ([ ''.join(c) for c in self.w ])
+
+ def dump (self):
+
+ """This returns a copy of the screen as a string. This is similar to
+ __str__ except that lines are not terminated with line feeds. """
+
+ return ''.join ([ ''.join(c) for c in self.w ])
+
+ def pretty (self):
+
+ """This returns a copy of the screen as a string with an ASCII text box
+ around the screen border. This is similar to __str__ except that it
+ adds a box. """
+
+ top_bot = '+' + '-'*self.cols + '+\n'
+ return top_bot + '\n'.join(['|'+line+'|' for line in str(self).split('\n')]) + '\n' + top_bot
+
+ def fill (self, ch=SPACE):
+
+ self.fill_region (1,1,self.rows,self.cols, ch)
+
+ def fill_region (self, rs,cs, re,ce, ch=SPACE):
+
+ rs = constrain (rs, 1, self.rows)
+ re = constrain (re, 1, self.rows)
+ cs = constrain (cs, 1, self.cols)
+ ce = constrain (ce, 1, self.cols)
+ if rs > re:
+ rs, re = re, rs
+ if cs > ce:
+ cs, ce = ce, cs
+ for r in range (rs, re+1):
+ for c in range (cs, ce + 1):
+ self.put_abs (r,c,ch)
+
+ def cr (self):
+
+ """This moves the cursor to the beginning (col 1) of the current row.
+ """
+
+ self.cursor_home (self.cur_r, 1)
+
+ def lf (self):
+
+ """This moves the cursor down with scrolling.
+ """
+
+ old_r = self.cur_r
+ self.cursor_down()
+ if old_r == self.cur_r:
+ self.scroll_up ()
+ self.erase_line()
+
+ def crlf (self):
+
+ """This advances the cursor with CRLF properties.
+ The cursor will line wrap and the screen may scroll.
+ """
+
+ self.cr ()
+ self.lf ()
+
+ def newline (self):
+
+ """This is an alias for crlf().
+ """
+
+ self.crlf()
+
+ def put_abs (self, r, c, ch):
+
+ """Screen array starts at 1 index."""
+
+ r = constrain (r, 1, self.rows)
+ c = constrain (c, 1, self.cols)
+ ch = str(ch)[0]
+ self.w[r-1][c-1] = ch
+
+ def put (self, ch):
+
+ """This puts a characters at the current cursor position.
+ """
+
+ self.put_abs (self.cur_r, self.cur_c, ch)
+
+ def insert_abs (self, r, c, ch):
+
+ """This inserts a character at (r,c). Everything under
+ and to the right is shifted right one character.
+ The last character of the line is lost.
+ """
+
+ r = constrain (r, 1, self.rows)
+ c = constrain (c, 1, self.cols)
+ for ci in range (self.cols, c, -1):
+ self.put_abs (r,ci, self.get_abs(r,ci-1))
+ self.put_abs (r,c,ch)
+
+ def insert (self, ch):
+
+ self.insert_abs (self.cur_r, self.cur_c, ch)
+
+ def get_abs (self, r, c):
+
+ r = constrain (r, 1, self.rows)
+ c = constrain (c, 1, self.cols)
+ return self.w[r-1][c-1]
+
+ def get (self):
+
+ self.get_abs (self.cur_r, self.cur_c)
+
+ def get_region (self, rs,cs, re,ce):
+
+ """This returns a list of lines representing the region.
+ """
+
+ rs = constrain (rs, 1, self.rows)
+ re = constrain (re, 1, self.rows)
+ cs = constrain (cs, 1, self.cols)
+ ce = constrain (ce, 1, self.cols)
+ if rs > re:
+ rs, re = re, rs
+ if cs > ce:
+ cs, ce = ce, cs
+ sc = []
+ for r in range (rs, re+1):
+ line = ''
+ for c in range (cs, ce + 1):
+ ch = self.get_abs (r,c)
+ line = line + ch
+ sc.append (line)
+ return sc
+
+ def cursor_constrain (self):
+
+ """This keeps the cursor within the screen area.
+ """
+
+ self.cur_r = constrain (self.cur_r, 1, self.rows)
+ self.cur_c = constrain (self.cur_c, 1, self.cols)
+
+ def cursor_home (self, r=1, c=1): # <ESC>[{ROW};{COLUMN}H
+
+ self.cur_r = r
+ self.cur_c = c
+ self.cursor_constrain ()
+
+ def cursor_back (self,count=1): # <ESC>[{COUNT}D (not confused with down)
+
+ self.cur_c = self.cur_c - count
+ self.cursor_constrain ()
+
+ def cursor_down (self,count=1): # <ESC>[{COUNT}B (not confused with back)
+
+ self.cur_r = self.cur_r + count
+ self.cursor_constrain ()
+
+ def cursor_forward (self,count=1): # <ESC>[{COUNT}C
+
+ self.cur_c = self.cur_c + count
+ self.cursor_constrain ()
+
+ def cursor_up (self,count=1): # <ESC>[{COUNT}A
+
+ self.cur_r = self.cur_r - count
+ self.cursor_constrain ()
+
+ def cursor_up_reverse (self): # <ESC> M (called RI -- Reverse Index)
+
+ old_r = self.cur_r
+ self.cursor_up()
+ if old_r == self.cur_r:
+ self.scroll_up()
+
+ def cursor_force_position (self, r, c): # <ESC>[{ROW};{COLUMN}f
+
+ """Identical to Cursor Home."""
+
+ self.cursor_home (r, c)
+
+ def cursor_save (self): # <ESC>[s
+
+ """Save current cursor position."""
+
+ self.cursor_save_attrs()
+
+ def cursor_unsave (self): # <ESC>[u
+
+ """Restores cursor position after a Save Cursor."""
+
+ self.cursor_restore_attrs()
+
+ def cursor_save_attrs (self): # <ESC>7
+
+ """Save current cursor position."""
+
+ self.cur_saved_r = self.cur_r
+ self.cur_saved_c = self.cur_c
+
+ def cursor_restore_attrs (self): # <ESC>8
+
+ """Restores cursor position after a Save Cursor."""
+
+ self.cursor_home (self.cur_saved_r, self.cur_saved_c)
+
+ def scroll_constrain (self):
+
+ """This keeps the scroll region within the screen region."""
+
+ if self.scroll_row_start <= 0:
+ self.scroll_row_start = 1
+ if self.scroll_row_end > self.rows:
+ self.scroll_row_end = self.rows
+
+ def scroll_screen (self): # <ESC>[r
+
+ """Enable scrolling for entire display."""
+
+ self.scroll_row_start = 1
+ self.scroll_row_end = self.rows
+
+ def scroll_screen_rows (self, rs, re): # <ESC>[{start};{end}r
+
+ """Enable scrolling from row {start} to row {end}."""
+
+ self.scroll_row_start = rs
+ self.scroll_row_end = re
+ self.scroll_constrain()
+
+ def scroll_down (self): # <ESC>D
+
+ """Scroll display down one line."""
+
+ # Screen is indexed from 1, but arrays are indexed from 0.
+ s = self.scroll_row_start - 1
+ e = self.scroll_row_end - 1
+ self.w[s+1:e+1] = copy.deepcopy(self.w[s:e])
+
+ def scroll_up (self): # <ESC>M
+
+ """Scroll display up one line."""
+
+ # Screen is indexed from 1, but arrays are indexed from 0.
+ s = self.scroll_row_start - 1
+ e = self.scroll_row_end - 1
+ self.w[s:e] = copy.deepcopy(self.w[s+1:e+1])
+
+ def erase_end_of_line (self): # <ESC>[0K -or- <ESC>[K
+
+ """Erases from the current cursor position to the end of the current
+ line."""
+
+ self.fill_region (self.cur_r, self.cur_c, self.cur_r, self.cols)
+
+ def erase_start_of_line (self): # <ESC>[1K
+
+ """Erases from the current cursor position to the start of the current
+ line."""
+
+ self.fill_region (self.cur_r, 1, self.cur_r, self.cur_c)
+
+ def erase_line (self): # <ESC>[2K
+
+ """Erases the entire current line."""
+
+ self.fill_region (self.cur_r, 1, self.cur_r, self.cols)
+
+ def erase_down (self): # <ESC>[0J -or- <ESC>[J
+
+ """Erases the screen from the current line down to the bottom of the
+ screen."""
+
+ self.erase_end_of_line ()
+ self.fill_region (self.cur_r + 1, 1, self.rows, self.cols)
+
+ def erase_up (self): # <ESC>[1J
+
+ """Erases the screen from the current line up to the top of the
+ screen."""
+
+ self.erase_start_of_line ()
+ self.fill_region (self.cur_r-1, 1, 1, self.cols)
+
+ def erase_screen (self): # <ESC>[2J
+
+ """Erases the screen with the background color."""
+
+ self.fill ()
+
+ def set_tab (self): # <ESC>H
+
+ """Sets a tab at the current position."""
+
+ pass
+
+ def clear_tab (self): # <ESC>[g
+
+ """Clears tab at the current position."""
+
+ pass
+
+ def clear_all_tabs (self): # <ESC>[3g
+
+ """Clears all tabs."""
+
+ pass
+
+# Insert line Esc [ Pn L
+# Delete line Esc [ Pn M
+# Delete character Esc [ Pn P
+# Scrolling region Esc [ Pn(top);Pn(bot) r
+
Added: lldb/trunk/test/pexpect-2.4/setup.py
URL: http://llvm.org/viewvc/llvm-project/lldb/trunk/test/pexpect-2.4/setup.py?rev=127484&view=auto
==============================================================================
--- lldb/trunk/test/pexpect-2.4/setup.py (added)
+++ lldb/trunk/test/pexpect-2.4/setup.py Fri Mar 11 14:13:06 2011
@@ -0,0 +1,39 @@
+'''
+$Revision: 485 $
+$Date: 2007-07-12 15:23:15 -0700 (Thu, 12 Jul 2007) $
+'''
+from distutils.core import setup
+setup (name='pexpect',
+ version='2.4',
+ py_modules=['pexpect', 'pxssh', 'fdpexpect', 'FSM', 'screen', 'ANSI'],
+ description='Pexpect is a pure Python Expect. It allows easy control of other applications.',
+ author='Noah Spurrier',
+ author_email='noah at noah.org',
+ url='http://pexpect.sourceforge.net/',
+ license='MIT license',
+ platforms='UNIX',
+)
+
+# classifiers = [
+# 'Development Status :: 4 - Beta',
+# 'Environment :: Console',
+# 'Environment :: Console (Text Based)',
+# 'Intended Audience :: Developers',
+# 'Intended Audience :: System Administrators',
+# 'Intended Audience :: Quality Engineers',
+# 'License :: OSI Approved :: Python Software Foundation License',
+# 'Operating System :: POSIX',
+# 'Operating System :: MacOS :: MacOS X',
+# 'Programming Language :: Python',
+# 'Topic :: Software Development',
+# 'Topic :: Software Development :: Libraries :: Python Modules',
+# 'Topic :: Software Development :: Quality Assurance',
+# 'Topic :: Software Development :: Testing',
+# 'Topic :: System, System :: Archiving :: Packaging, System :: Installation/Setup',
+# 'Topic :: System :: Shells',
+# 'Topic :: System :: Software Distribution',
+# 'Topic :: Terminals, Utilities',
+# ],
+
+
+
Propchange: lldb/trunk/test/pexpect-2.4/setup.py
------------------------------------------------------------------------------
svn:executable = *
More information about the lldb-commits
mailing list