[cfe-commits] r168297 - in /cfe/trunk: include/clang/Basic/DiagnosticDriverKinds.td include/clang/Driver/ToolChain.h lib/Driver/ToolChains.cpp lib/Driver/ToolChains.h lib/Driver/Tools.cpp lib/Driver/WindowsToolChain.cpp test/Driver/pic.c

32bitmicro root at 32bitmicro.com
Tue Nov 20 15:05:23 PST 2012


Since branching there were other changes in these 2 files below.
I am assuming you want all the revisions listed up to r168297.
Just need a stamp :)

Pawel


cfe/lib/Driver/Tools.cpp

r168217, r168168, r168063, r168024, r167846, r167799

cfe/test/Driver/pic.c
r167846


Logs for changes between 3.2 branch and r168297.


cfe/lib/Driver/Tools.cpp

------------------------------------------------------------------------
r168217 | void | 2012-11-16 17:03:00 -0600 (Fri, 16 Nov 2012) | 1 line

Revert r167799. It's not really correct, and it doesn't fix the problem
that it
was intended to fix.
------------------------------------------------------------------------
r168168 | samsonov | 2012-11-16 06:53:14 -0600 (Fri, 16 Nov 2012) | 1 line

UBSan: enable proper linking with UBsan runtime on Darwin. Turn on
building ubsa
n on OS X in 'make' build system. Patch by Jean-Daniel Dupas.
------------------------------------------------------------------------
r168063 | fjahanian | 2012-11-15 13:02:45 -0600 (Thu, 15 Nov 2012) | 5 lines

block extended signatur option. Change previous option
to a cc1 -fencode-extended-block-signature and pass it
to cc1 and recognize this option to produce extended block
type signature. // rdar://12109031

------------------------------------------------------------------------
r168024 | nicholas | 2012-11-14 23:36:36 -0600 (Wed, 14 Nov 2012) | 3 lines

Revert r167567, restoring the ability of clang to run gcc in cases where it
can't handle the input file type. This resulted in PR14338.

r167846 | d0k | 2012-11-13 09:32:35 -0600 (Tue, 13 Nov 2012) | 9 lines

This patch makes the behavior of clang consistent with the behavior of
gcc 4.6 i
n cases where both -fPIC and -fPIE is used.

- Separately check if -fPIE was specified in the command line and define
both __
PIC__ and __PIE__ when -fPIE is used. We need to check this separately
because -
fPIE will infer -fPIC even if its not explicitly used.
- Fixed existing tests.
- Added new tests for cases where both -fPIC and -fPIE is used.

Author: Tareq A. Siraj <tareq.a.siraj at intel.com>
Fixes: PR13221
Review: http://llvm-reviews.chandlerc.com/D94

------------------------------------------------------------------------
r167799 | void | 2012-11-12 18:54:24 -0600 (Mon, 12 Nov 2012) | 6 lines

Disable accelerator tables when compiling with LTO.

LTO doesn't generate correct accelerator tables. This is due to the
general lack
correct of debug info for LTO. Disable it when using LTO.
<rdar://problem/12401423>




cfe/test/Driver/pic.c

------------------------------------------------------------------------
r167846 | d0k | 2012-11-13 09:32:35 -0600 (Tue, 13 Nov 2012) | 9 lines

This patch makes the behavior of clang consistent with the behavior of
gcc 4.6 i
n cases where both -fPIC and -fPIE is used.

- Separately check if -fPIE was specified in the command line and define
both __
PIC__ and __PIE__ when -fPIE is used. We need to check this separately
because -
fPIE will infer -fPIC even if its not explicitly used.
- Fixed existing tests.
- Added new tests for cases where both -fPIC and -fPIE is used.

Author: Tareq A. Siraj <tareq.a.siraj at intel.com>
Fixes: PR13221
Review: http://llvm-reviews.chandlerc.com/D94





On 11/20/2012 3:55 PM, Chad Rosier wrote:
> That works too! :)
> 
> 
> 
> On Nov 20, 2012, at 5:30 PM, Chandler Carruth <chandlerc at gmail.com> wrote:
> 
>> It should be Pawel who is doing that this release I think. =]
>>
>> On Tue, Nov 20, 2012 at 12:40 PM, Chad Rosier <mcrosier at apple.com> wrote:
>>> Sounds good to me.  Bill, would you mind merging this to the branch?
>>>
>>> Chad
>>>
>>>
>>> On Nov 20, 2012, at 5:39 AM, Chandler Carruth <chandlerc at gmail.com> wrote:
>>>
>>>> Chad, I suspect this should go into 3.2... Without it, ASan is often
>>>> unable to link with PIE, and lots of other weird behavior is observed.
>>>> The bad range of commits is pretty good, ever since the intel patch
>>>> reworking this in the other direction.
>>>>
>>>> Pawel, Chad is the code owner for the driver.
>>>>
>>>> On Sun, Nov 18, 2012 at 7:52 PM, Chandler Carruth <chandlerc at gmail.com> wrote:
>>>>> Author: chandlerc
>>>>> Date: Sun Nov 18 21:52:03 2012
>>>>> New Revision: 168297
>>>>>
>>>>> URL: http://llvm.org/viewvc/llvm-project?rev=168297&view=rev
>>>>> Log:
>>>>> Completely re-work how the Clang driver interprets PIC and PIE options.
>>>>>
>>>>> There were numerous issues here that were all entangled, and so I've
>>>>> tried to do a general simplification of the logic.
>>>>> 1) The logic was mimicing actual GCC bugs, rather than "features". These
>>>>>  have been fixed in trunk GCC, and this fixes Clang as well. Notably,
>>>>>  the logic was always intended to be last-match-wins like any other
>>>>>  flag.
>>>>> 2) The logic for handling '-mdynamic-no-pic' was preposterously unclear.
>>>>>  It also allowed the use of this flag on non-Darwin platforms where it
>>>>>  has no actual meaning. Now this option is handled directly based on
>>>>>  tests of how llvm-gcc behaves, and it is only supported on Darwin.
>>>>> 3) The APIs for the Driver's ToolChains had the implementation ugliness
>>>>>  of dynamic-no-pic leaking through them. They also had the
>>>>>  implementation details of the LLVM relocation model flag names
>>>>>  leaking through.
>>>>> 4) The actual results of passing these flags was incorrect on Darwin in
>>>>>  many cases. For example, Darwin *always* uses PIC level 2 if it uses
>>>>>  in PIC level, and Darwin *always* uses PIC on 64-bit regardless of
>>>>>  the flags specified, including -fPIE. Darwin never compiles in PIE
>>>>>  mode, but it can *link* in PIE mode.
>>>>> 5) Also, PIC was not always being enabled even when PIE was. This isn't
>>>>>  a supported mode at all and may have caused some fallout in builds
>>>>>  with complex PIC and PIE interactions.
>>>>>
>>>>> The result is (I hope) cleaner and clearer for readers. I've also left
>>>>> comments and tests about some of the truly strage behavior that is
>>>>> observed on Darwin platforms. We have no real testing of Windows
>>>>> platforms and PIC, but I don't have the tools handy to figure that out.
>>>>> Hopefully others can beef up our testing here.
>>>>>
>>>>> Unfortunately, I can't test this for every platform. =/ If folks have
>>>>> dependencies on these flags that aren't covered by tests, they may
>>>>> break. I've audited and ensured that all the changes in behavior of the
>>>>> existing tests are intentional and good. In particular I've tried to
>>>>> make sure the Darwin behavior (which is more suprising than the Linux
>>>>> behavior) also matches that of 'gcc' on my mac.
>>>>>
>>>>> Modified:
>>>>>   cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td
>>>>>   cfe/trunk/include/clang/Driver/ToolChain.h
>>>>>   cfe/trunk/lib/Driver/ToolChains.cpp
>>>>>   cfe/trunk/lib/Driver/ToolChains.h
>>>>>   cfe/trunk/lib/Driver/Tools.cpp
>>>>>   cfe/trunk/lib/Driver/WindowsToolChain.cpp
>>>>>   cfe/trunk/test/Driver/pic.c
>>>>>
>>>>> Modified: cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td (original)
>>>>> +++ cfe/trunk/include/clang/Basic/DiagnosticDriverKinds.td Sun Nov 18 21:52:03 2012
>>>>> @@ -11,6 +11,8 @@
>>>>>
>>>>> def err_drv_no_such_file : Error<"no such file or directory: '%0'">;
>>>>> def err_drv_unsupported_opt : Error<"unsupported option '%0'">;
>>>>> +def err_drv_unsupported_opt_for_target : Error<
>>>>> +  "unsupported option '%0' for target '%1'">;
>>>>> def err_drv_unsupported_option_argument : Error<
>>>>>  "unsupported argument '%1' to option '%0'">;
>>>>> def err_drv_unknown_stdin_type : Error<
>>>>>
>>>>> Modified: cfe/trunk/include/clang/Driver/ToolChain.h
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/include/clang/Driver/ToolChain.h?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/include/clang/Driver/ToolChain.h (original)
>>>>> +++ cfe/trunk/include/clang/Driver/ToolChain.h Sun Nov 18 21:52:03 2012
>>>>> @@ -176,14 +176,13 @@
>>>>>  /// by default.
>>>>>  virtual bool IsUnwindTablesDefault() const;
>>>>>
>>>>> -  /// GetDefaultRelocationModel - Return the LLVM name of the default
>>>>> -  /// relocation model for this tool chain.
>>>>> -  virtual const char *GetDefaultRelocationModel() const = 0;
>>>>> -
>>>>> -  /// GetForcedPicModel - Return the LLVM name of the forced PIC model
>>>>> -  /// for this tool chain, or 0 if this tool chain does not force a
>>>>> -  /// particular PIC mode.
>>>>> -  virtual const char *GetForcedPicModel() const = 0;
>>>>> +  /// \brief Test whether this toolchain defaults to PIC.
>>>>> +  virtual bool isPICDefault() const = 0;
>>>>> +
>>>>> +  /// \brief Tests whether this toolchain forces its default for PIC or non-PIC.
>>>>> +  /// If this returns true, any PIC related flags should be ignored and instead
>>>>> +  /// the result of \c isPICDefault() is used exclusively.
>>>>> +  virtual bool isPICDefaultForced() const = 0;
>>>>>
>>>>>  /// SupportsProfiling - Does this tool chain support -pg.
>>>>>  virtual bool SupportsProfiling() const { return true; }
>>>>>
>>>>> Modified: cfe/trunk/lib/Driver/ToolChains.cpp
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/ToolChains.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/lib/Driver/ToolChains.cpp (original)
>>>>> +++ cfe/trunk/lib/Driver/ToolChains.cpp Sun Nov 18 21:52:03 2012
>>>>> @@ -886,14 +886,12 @@
>>>>>          getTriple().getArch() == llvm::Triple::thumb);
>>>>> }
>>>>>
>>>>> -const char *Darwin::GetDefaultRelocationModel() const {
>>>>> -  return "pic";
>>>>> +bool Darwin::isPICDefault() const {
>>>>> +  return true;
>>>>> }
>>>>>
>>>>> -const char *Darwin::GetForcedPicModel() const {
>>>>> -  if (getArch() == llvm::Triple::x86_64)
>>>>> -    return "pic";
>>>>> -  return 0;
>>>>> +bool Darwin::isPICDefaultForced() const {
>>>>> +  return getArch() == llvm::Triple::x86_64;
>>>>> }
>>>>>
>>>>> bool Darwin::SupportsProfiling() const {
>>>>> @@ -1395,13 +1393,14 @@
>>>>>  return getArch() == llvm::Triple::x86_64;
>>>>> }
>>>>>
>>>>> -const char *Generic_GCC::GetDefaultRelocationModel() const {
>>>>> -  return "static";
>>>>> +bool Generic_GCC::isPICDefault() const {
>>>>> +  return false;
>>>>> }
>>>>>
>>>>> -const char *Generic_GCC::GetForcedPicModel() const {
>>>>> -  return 0;
>>>>> +bool Generic_GCC::isPICDefaultForced() const {
>>>>> +  return false;
>>>>> }
>>>>> +
>>>>> /// Hexagon Toolchain
>>>>>
>>>>> Hexagon_TC::Hexagon_TC(const Driver &D, const llvm::Triple& Triple)
>>>>> @@ -1455,14 +1454,13 @@
>>>>>  return *T;
>>>>> }
>>>>>
>>>>> -const char *Hexagon_TC::GetDefaultRelocationModel() const {
>>>>> -  return "static";
>>>>> +bool Hexagon_TC::isPICDefault() const {
>>>>> +  return false;
>>>>> }
>>>>>
>>>>> -const char *Hexagon_TC::GetForcedPicModel() const {
>>>>> -  return 0;
>>>>> -} // End Hexagon
>>>>> -
>>>>> +bool Hexagon_TC::isPICDefaultForced() const {
>>>>> +  return false;
>>>>> +}
>>>>>
>>>>> /// TCEToolChain - A tool chain using the llvm bitcode tools to perform
>>>>> /// all subcommands. See http://tce.cs.tut.fi for our peculiar target.
>>>>> @@ -1487,12 +1485,12 @@
>>>>>  return true;
>>>>> }
>>>>>
>>>>> -const char *TCEToolChain::GetDefaultRelocationModel() const {
>>>>> -  return "static";
>>>>> +bool TCEToolChain::isPICDefault() const {
>>>>> +  return false;
>>>>> }
>>>>>
>>>>> -const char *TCEToolChain::GetForcedPicModel() const {
>>>>> -  return 0;
>>>>> +bool TCEToolChain::isPICDefaultForced() const {
>>>>> +  return false;
>>>>> }
>>>>>
>>>>> Tool &TCEToolChain::SelectTool(const Compilation &C,
>>>>>
>>>>> Modified: cfe/trunk/lib/Driver/ToolChains.h
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/ToolChains.h?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/lib/Driver/ToolChains.h (original)
>>>>> +++ cfe/trunk/lib/Driver/ToolChains.h Sun Nov 18 21:52:03 2012
>>>>> @@ -129,8 +129,8 @@
>>>>>                           const ActionList &Inputs) const;
>>>>>
>>>>>  virtual bool IsUnwindTablesDefault() const;
>>>>> -  virtual const char *GetDefaultRelocationModel() const;
>>>>> -  virtual const char *GetForcedPicModel() const;
>>>>> +  virtual bool isPICDefault() const;
>>>>> +  virtual bool isPICDefaultForced() const;
>>>>>
>>>>> protected:
>>>>>  /// \name ToolChain Implementation Helper Functions
>>>>> @@ -156,8 +156,8 @@
>>>>>  virtual Tool &SelectTool(const Compilation &C, const JobAction &JA,
>>>>>                           const ActionList &Inputs) const;
>>>>>
>>>>> -  virtual const char *GetDefaultRelocationModel() const;
>>>>> -  virtual const char *GetForcedPicModel() const;
>>>>> +  virtual bool isPICDefault() const;
>>>>> +  virtual bool isPICDefaultForced() const;
>>>>> };
>>>>>
>>>>>  /// Darwin - The base Darwin tool chain.
>>>>> @@ -344,8 +344,8 @@
>>>>>  virtual RuntimeLibType GetDefaultRuntimeLibType() const {
>>>>>    return ToolChain::RLT_CompilerRT;
>>>>>  }
>>>>> -  virtual const char *GetDefaultRelocationModel() const;
>>>>> -  virtual const char *GetForcedPicModel() const;
>>>>> +  virtual bool isPICDefault() const;
>>>>> +  virtual bool isPICDefaultForced() const;
>>>>>
>>>>>  virtual bool SupportsProfiling() const;
>>>>>
>>>>> @@ -393,7 +393,7 @@
>>>>>  std::string ComputeEffectiveClangTriple(const ArgList &Args,
>>>>>                                          types::ID InputType) const;
>>>>>
>>>>> -  virtual const char *GetDefaultRelocationModel() const { return "pic"; }
>>>>> +  virtual bool isPICDefault() const { return false; };
>>>>> };
>>>>>
>>>>> class LLVM_LIBRARY_VISIBILITY Generic_ELF : public Generic_GCC {
>>>>> @@ -534,8 +534,8 @@
>>>>>  virtual Tool &SelectTool(const Compilation &C, const JobAction &JA,
>>>>>                           const ActionList &Inputs) const;
>>>>>  bool IsMathErrnoDefault() const;
>>>>> -  const char* GetDefaultRelocationModel() const;
>>>>> -  const char* GetForcedPicModel() const;
>>>>> +  bool isPICDefault() const;
>>>>> +  bool isPICDefaultForced() const;
>>>>>
>>>>> private:
>>>>>  mutable llvm::DenseMap<unsigned, Tool*> Tools;
>>>>> @@ -557,8 +557,8 @@
>>>>>
>>>>>  virtual bool IsIntegratedAssemblerDefault() const;
>>>>>  virtual bool IsUnwindTablesDefault() const;
>>>>> -  virtual const char *GetDefaultRelocationModel() const;
>>>>> -  virtual const char *GetForcedPicModel() const;
>>>>> +  virtual bool isPICDefault() const;
>>>>> +  virtual bool isPICDefaultForced() const;
>>>>>
>>>>>  virtual void AddClangSystemIncludeArgs(const ArgList &DriverArgs,
>>>>>                                         ArgStringList &CC1Args) const;
>>>>>
>>>>> Modified: cfe/trunk/lib/Driver/Tools.cpp
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/Tools.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/lib/Driver/Tools.cpp (original)
>>>>> +++ cfe/trunk/lib/Driver/Tools.cpp Sun Nov 18 21:52:03 2012
>>>>> @@ -1769,38 +1769,46 @@
>>>>>
>>>>>  CheckCodeGenerationOptions(D, Args);
>>>>>
>>>>> -  // Perform argument translation for LLVM backend. This
>>>>> -  // takes some care in reconciling with llvm-gcc. The
>>>>> -  // issue is that llvm-gcc translates these options based on
>>>>> -  // the values in cc1, whereas we are processing based on
>>>>> -  // the driver arguments.
>>>>> -
>>>>> -  // This comes from the default translation the driver + cc1
>>>>> -  // would do to enable flag_pic.
>>>>> -
>>>>> -  Arg *LastPICArg = Args.getLastArg(options::OPT_fPIC, options::OPT_fno_PIC,
>>>>> -                                    options::OPT_fpic, options::OPT_fno_pic);
>>>>> -  // We need to check for PIE flags separately because they can override the
>>>>> -  // PIC flags.
>>>>> -  Arg *LastPIEArg = Args.getLastArg(options::OPT_fPIE, options::OPT_fno_PIE,
>>>>> -                                    options::OPT_fpie, options::OPT_fno_pie);
>>>>> -  bool PICDisabled = false;
>>>>> -  bool PICEnabled = false;
>>>>> -  bool PICForPIE = false;
>>>>> -  if (LastPIEArg) {
>>>>> -    PICForPIE = (LastPIEArg->getOption().matches(options::OPT_fPIE) ||
>>>>> -                 LastPIEArg->getOption().matches(options::OPT_fpie));
>>>>> -  }
>>>>> -  if (LastPICArg || PICForPIE) {
>>>>> -    // The last PIE enabled argument can infer that PIC is enabled.
>>>>> -    PICEnabled = (PICForPIE ||
>>>>> -                  LastPICArg->getOption().matches(options::OPT_fPIC) ||
>>>>> -                  LastPICArg->getOption().matches(options::OPT_fpic));
>>>>> -    // We need to have PICDisabled inside the if statement because on darwin
>>>>> -    // PIC is enabled by default even if PIC arguments are not in the command
>>>>> -    // line (in this case causes PICDisabled to be true).
>>>>> -    PICDisabled = !PICEnabled;
>>>>> +  // For the PIC and PIE flag options, this logic is different from the legacy
>>>>> +  // logic in very old versions of GCC, as that logic was just a bug no one had
>>>>> +  // ever fixed. This logic is both more rational and consistent with GCC's new
>>>>> +  // logic now that the bugs are fixed. The last argument relating to either
>>>>> +  // PIC or PIE wins, and no other argument is used. If the last argument is
>>>>> +  // any flavor of the '-fno-...' arguments, both PIC and PIE are disabled. Any
>>>>> +  // PIE option implicitly enables PIC at the same level.
>>>>> +  bool PIE = false;
>>>>> +  bool PIC = getToolChain().isPICDefault();
>>>>> +  bool IsPICLevelTwo = PIC;
>>>>> +  if (Arg *A = Args.getLastArg(options::OPT_fPIC, options::OPT_fno_PIC,
>>>>> +                               options::OPT_fpic, options::OPT_fno_pic,
>>>>> +                               options::OPT_fPIE, options::OPT_fno_PIE,
>>>>> +                               options::OPT_fpie, options::OPT_fno_pie)) {
>>>>> +    Option O = A->getOption();
>>>>> +    if (O.matches(options::OPT_fPIC) || O.matches(options::OPT_fpic) ||
>>>>> +        O.matches(options::OPT_fPIE) || O.matches(options::OPT_fpie)) {
>>>>> +      PIE = O.matches(options::OPT_fPIE) || O.matches(options::OPT_fpie);
>>>>> +      PIC = PIE || O.matches(options::OPT_fPIC) || O.matches(options::OPT_fpic);
>>>>> +      IsPICLevelTwo = O.matches(options::OPT_fPIE) ||
>>>>> +                      O.matches(options::OPT_fPIC);
>>>>> +    } else {
>>>>> +      PIE = PIC = false;
>>>>> +    }
>>>>>  }
>>>>> +  // Check whether the tool chain trumps the PIC-ness decision. If the PIC-ness
>>>>> +  // is forced, then neither PIC nor PIE flags will have no effect.
>>>>> +  if (getToolChain().isPICDefaultForced()) {
>>>>> +    PIE = false;
>>>>> +    PIC = getToolChain().isPICDefault();
>>>>> +    IsPICLevelTwo = PIC;
>>>>> +  }
>>>>> +
>>>>> +  // Inroduce a Darwin-specific hack. If the default is PIC but the flags
>>>>> +  // specified while enabling PIC enabled level 1 PIC, just force it back to
>>>>> +  // level 2 PIC instead. This matches the behavior of Darwin GCC (based on my
>>>>> +  // informal testing).
>>>>> +  if (PIC && getToolChain().getTriple().isOSDarwin())
>>>>> +    IsPICLevelTwo |= getToolChain().isPICDefault();
>>>>> +
>>>>>  // Note that these flags are trump-cards. Regardless of the order w.r.t. the
>>>>>  // PIC or PIE options above, if these show up, PIC is disabled.
>>>>>  llvm::Triple Triple(TripleStr);
>>>>> @@ -1808,44 +1816,43 @@
>>>>>       Args.hasArg(options::OPT_fapple_kext)) &&
>>>>>      (Triple.getOS() != llvm::Triple::IOS ||
>>>>>       Triple.isOSVersionLT(6)))
>>>>> -    PICDisabled = true;
>>>>> +    PIC = PIE = false;
>>>>>  if (Args.hasArg(options::OPT_static))
>>>>> -    PICDisabled = true;
>>>>> -  bool DynamicNoPIC = Args.hasArg(options::OPT_mdynamic_no_pic);
>>>>> +    PIC = PIE = false;
>>>>> +
>>>>> +  if (Arg *A = Args.getLastArg(options::OPT_mdynamic_no_pic)) {
>>>>> +    // This is a very special mode. It trumps the other modes, almost no one
>>>>> +    // uses it, and it isn't even valid on any OS but Darwin.
>>>>> +    if (!getToolChain().getTriple().isOSDarwin())
>>>>> +      D.Diag(diag::err_drv_unsupported_opt_for_target)
>>>>> +        << A->getSpelling() << getToolChain().getTriple().str();
>>>>> +
>>>>> +    // FIXME: Warn when this flag trumps some other PIC or PIE flag.
>>>>>
>>>>> -  // Select the relocation model.
>>>>> -  const char *Model = getToolChain().GetForcedPicModel();
>>>>> -  if (!Model) {
>>>>> -    if (DynamicNoPIC)
>>>>> -      Model = "dynamic-no-pic";
>>>>> -    else if (PICDisabled)
>>>>> -      Model = "static";
>>>>> -    else if (PICEnabled)
>>>>> -      Model = "pic";
>>>>> -    else
>>>>> -      Model = getToolChain().GetDefaultRelocationModel();
>>>>> -  }
>>>>> -  StringRef ModelStr = Model ? Model : "";
>>>>> -  if (Model && ModelStr != "pic") {
>>>>>    CmdArgs.push_back("-mrelocation-model");
>>>>> -    CmdArgs.push_back(Model);
>>>>> -  }
>>>>> +    CmdArgs.push_back("dynamic-no-pic");
>>>>>
>>>>> -  // Infer the __PIC__ and __PIE__ values.
>>>>> -  if (ModelStr == "pic" && PICForPIE) {
>>>>> -    CmdArgs.push_back("-pic-level");
>>>>> -    CmdArgs.push_back((LastPIEArg &&
>>>>> -                      LastPIEArg->getOption().matches(options::OPT_fPIE)) ?
>>>>> -                      "2" : "1");
>>>>> -    CmdArgs.push_back("-pie-level");
>>>>> -    CmdArgs.push_back((LastPIEArg &&
>>>>> -                       LastPIEArg->getOption().matches(options::OPT_fPIE)) ?
>>>>> -                      "2" : "1");
>>>>> -  } else if (ModelStr == "pic" || ModelStr == "dynamic-no-pic") {
>>>>> -    CmdArgs.push_back("-pic-level");
>>>>> -    CmdArgs.push_back(((ModelStr != "dynamic-no-pic" && LastPICArg &&
>>>>> -                        LastPICArg->getOption().matches(options::OPT_fPIC)) ||
>>>>> -                       getToolChain().getTriple().isOSDarwin()) ? "2" : "1");
>>>>> +    // Only a forced PIC mode can cause the actual compile to have PIC defines
>>>>> +    // etc., no flags are sufficient. This behavior was selected to closely
>>>>> +    // match that of llvm-gcc and Apple GCC before that.
>>>>> +    if (getToolChain().isPICDefault() && getToolChain().isPICDefaultForced()) {
>>>>> +      CmdArgs.push_back("-pic-level");
>>>>> +      CmdArgs.push_back("2");
>>>>> +    }
>>>>> +  } else {
>>>>> +    // Currently, LLVM only knows about PIC vs. static; the PIE differences are
>>>>> +    // handled in Clang's IRGen by the -pie-level flag.
>>>>> +    CmdArgs.push_back("-mrelocation-model");
>>>>> +    CmdArgs.push_back(PIC ? "pic" : "static");
>>>>> +
>>>>> +    if (PIC) {
>>>>> +      CmdArgs.push_back("-pic-level");
>>>>> +      CmdArgs.push_back(IsPICLevelTwo ? "2" : "1");
>>>>> +      if (PIE) {
>>>>> +        CmdArgs.push_back("-pie-level");
>>>>> +        CmdArgs.push_back(IsPICLevelTwo ? "2" : "1");
>>>>> +      }
>>>>> +    }
>>>>>  }
>>>>>
>>>>>  if (!Args.hasFlag(options::OPT_fmerge_all_constants,
>>>>>
>>>>> Modified: cfe/trunk/lib/Driver/WindowsToolChain.cpp
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/lib/Driver/WindowsToolChain.cpp?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/lib/Driver/WindowsToolChain.cpp (original)
>>>>> +++ cfe/trunk/lib/Driver/WindowsToolChain.cpp Sun Nov 18 21:52:03 2012
>>>>> @@ -84,14 +84,12 @@
>>>>>  return getArch() == llvm::Triple::x86_64;
>>>>> }
>>>>>
>>>>> -const char *Windows::GetDefaultRelocationModel() const {
>>>>> -  return "static";
>>>>> +bool Windows::isPICDefault() const {
>>>>> +  return getArch() == llvm::Triple::x86_64;
>>>>> }
>>>>>
>>>>> -const char *Windows::GetForcedPicModel() const {
>>>>> -  if (getArch() == llvm::Triple::x86_64)
>>>>> -    return "pic";
>>>>> -  return 0;
>>>>> +bool Windows::isPICDefaultForced() const {
>>>>> +  return getArch() == llvm::Triple::x86_64;
>>>>> }
>>>>>
>>>>> // FIXME: This probably should goto to some platform utils place.
>>>>>
>>>>> Modified: cfe/trunk/test/Driver/pic.c
>>>>> URL: http://llvm.org/viewvc/llvm-project/cfe/trunk/test/Driver/pic.c?rev=168297&r1=168296&r2=168297&view=diff
>>>>> ==============================================================================
>>>>> --- cfe/trunk/test/Driver/pic.c (original)
>>>>> +++ cfe/trunk/test/Driver/pic.c Sun Nov 18 21:52:03 2012
>>>>> @@ -5,28 +5,34 @@
>>>>> // CHECK-NO-PIC-NOT: "-pic-level"
>>>>> // CHECK-NO-PIC-NOT: "-pie-level"
>>>>> //
>>>>> -// CHECK-DYNAMIC-NO-PIC1: "-mrelocation-model" "dynamic-no-pic"
>>>>> -// CHECK-DYNAMIC-NO-PIC1: "-pic-level" "1"
>>>>> -//
>>>>> -// CHECK-DYNAMIC-NO-PIC2: "-mrelocation-model" "dynamic-no-pic"
>>>>> -// CHECK-DYNAMIC-NO-PIC2: "-pic-level" "2"
>>>>> -//
>>>>> -// CHECK-PIC1-NOT: "-mrelocation-model"
>>>>> +// CHECK-PIC1: "-mrelocation-model" "pic"
>>>>> // CHECK-PIC1: "-pic-level" "1"
>>>>> //
>>>>> -// CHECK-PIC2-NOT: "-mrelocation-model"
>>>>> +// CHECK-PIC2: "-mrelocation-model" "pic"
>>>>> // CHECK-PIC2: "-pic-level" "2"
>>>>> //
>>>>> -// CHECK-PIE1-NOT: "-mrelocation-model"
>>>>> +// CHECK-PIE1: "-mrelocation-model" "pic"
>>>>> +// CHECK-PIE1: "-pic-level" "1"
>>>>> // CHECK-PIE1: "-pie-level" "1"
>>>>> //
>>>>> -// CHECK-PIE2-NOT: "-mrelocation-model"
>>>>> +// CHECK-PIE2: "-mrelocation-model" "pic"
>>>>> +// CHECK-PIE2: "-pic-level" "2"
>>>>> // CHECK-PIE2: "-pie-level" "2"
>>>>> //
>>>>> -// CHECK-PIE3: "{{.*}}ld{{(.exe)?}}"
>>>>> -// CHECK-PIE3: "-pie"
>>>>> -// CHECK-PIE3: "Scrt1.o" "crti.o" "crtbeginS.o"
>>>>> -// CHECK-PIE3: "crtendS.o" "crtn.o"
>>>>> +// CHECK-PIE-LD: "{{.*}}ld{{(.exe)?}}"
>>>>> +// CHECK-PIE-LD: "-pie"
>>>>> +// CHECK-PIE-LD: "Scrt1.o" "crti.o" "crtbeginS.o"
>>>>> +// CHECK-PIE-LD: "crtendS.o" "crtn.o"
>>>>> +//
>>>>> +// CHECK-DYNAMIC-NO-PIC-32: "-mrelocation-model" "dynamic-no-pic"
>>>>> +// CHECK-DYNAMIC-NO-PIC-32-NOT: "-pic-level"
>>>>> +// CHECK-DYNAMIC-NO-PIC-32-NOT: "-pie-level"
>>>>> +//
>>>>> +// CHECK-DYNAMIC-NO-PIC-64: "-mrelocation-model" "dynamic-no-pic"
>>>>> +// CHECK-DYNAMIC-NO-PIC-64: "-pic-level" "2"
>>>>> +// CHECK-DYNAMIC-NO-PIC-64-NOT: "-pie-level"
>>>>> +//
>>>>> +// CHECK-NON-DARWIN-DYNAMIC-NO-PIC: error: unsupported option '-mdynamic-no-pic' for target 'i386-unknown-unknown'
>>>>> //
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> @@ -38,107 +44,141 @@
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> +//
>>>>> +// Check that PIC and PIE flags obey last-match-wins. If the last flag is
>>>>> +// a no-* variant, regardless of which variant or which flags precede it, we
>>>>> +// get no PIC.
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pic -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIC -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pic -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIC -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pic -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pie -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pie -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIE -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pie -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pie -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -fpie -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -fPIE -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> //
>>>>> -// Cases where both pic and pie are specified
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> +// Last-match-wins where both pic and pie are specified.
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fpic -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fpic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIE -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpie -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpie -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fPIE -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fPIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>>>> +//
>>>>> +// Last-match-wins when selecting level 1 vs. level 2.
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIC -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpie -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpic -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpie -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -fpie -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE1
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -fPIE -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIE2
>>>>> //
>>>>> -// Defaults change for Darwin.
>>>>> -// RUN: %clang -c %s -target i386-apple-darwin -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> -// RUN: %clang -c %s -target i386-apple-darwin -fno-pic -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -//
>>>>> // Make sure -pie is passed to along to ld and that the right *crt* files
>>>>> // are linked in.
>>>>> // RUN: %clang %s -target i386-unknown-freebsd -fPIE -pie -### \
>>>>> // RUN: --sysroot=%S/Inputs/basic_freebsd_tree 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE3
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIE-LD
>>>>> // RUN: %clang %s -target i386-linux-gnu -fPIE -pie -### \
>>>>> // RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-PIE3
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIE-LD
>>>>> +// RUN: %clang %s -target i386-linux-gnu -fPIC -pie -### \
>>>>> +// RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIE-LD
>>>>> //
>>>>> // Disregard any of the PIC-specific flags if we have a trump-card flag.
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -mkernel -fPIC -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> // RUN: %clang -c %s -target i386-unknown-unknown -static -fPIC -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> -// RUN: %clang -c %s -target i386-unknown-unknown -mdynamic-no-pic -fPIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC1
>>>>> -// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fPIC -### 2>&1 \
>>>>> -// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC2
>>>>> -
>>>>> -// Checks for ARM
>>>>> +//
>>>>> +// Darwin is a beautiful and unique snowflake when it comes to these flags.
>>>>> +// When targetting a 32-bit darwin system, the -fno-* flag variants work and
>>>>> +// disable PIC, but any other flag enables PIC (*not* PIE) even if the flag
>>>>> +// specifies PIE. On 64-bit targets, there is simply nothing you can do, there
>>>>> +// is no PIE, there is only PIC when it comes to compilation.
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fpic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fPIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fpie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fPIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fpic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fPIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIC -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fpic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -fPIE -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> +//
>>>>> +// Darwin gets even more special with '-mdynamic-no-pic'. This flag is only
>>>>> +// valid on Darwin, and it's behavior is very strange but needs to remain
>>>>> +// consistent for compatibility.
>>>>> +// RUN: %clang -c %s -target i386-unknown-unknown -mdynamic-no-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-NON-DARWIN-DYNAMIC-NO-PIC
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>>>> +// RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>>>> +// RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \
>>>>> +// RUN:   | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64
>>>>> +//
>>>>> +// Checks for ARM+Apple+IOS including -fapple-kext, -mkernel, and iphoneos
>>>>> +// version boundaries.
>>>>> // RUN: %clang -c %s -target armv7-apple-ios -fapple-kext -miphoneos-version-min=6.0.0 -### 2>&1 \
>>>>> // RUN:   | FileCheck %s --check-prefix=CHECK-PIC2
>>>>> // RUN: %clang -c %s -target armv7-apple-ios -mkernel -miphoneos-version-min=6.0.0 -### 2>&1 \
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> cfe-commits mailing list
>>>>> cfe-commits at cs.uiuc.edu
>>>>> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
>>> _______________________________________________
>>> cfe-commits mailing list
>>> cfe-commits at cs.uiuc.edu
>>> http://lists.cs.uiuc.edu/mailman/listinfo/cfe-commits
> 
> 




More information about the cfe-commits mailing list